Second Draft Agenda (F2016) - NFPA...TyJ.Maltbie Principal Viega LLC 2211 Viega Avenue McPherson,KS67460 M10/20/2010 MAN-AAA RobertParks Principal Healthy Homes of Louisiana 104 Cherokee

Second Draft Agenda (F2016)

NFPA Technical Committee on Manufactured Housing

Adobe Connect/Web Teleconference

Wednesday March 16, 2015 -10:00 AM ET

Adobe Connect Web Info: To join the meeting: http://nfpa.adobeconnect.com/tracy/

Conference phone number: US: 1-855-747-8824

Participant code: 533726

1. Call to order 10:00 AM – J. Lake.

2. Self-introduction of members and guests. See attached committee list.

3. Approval of March 10, 2015 First Draft meeting minutes, see attached.

4. Chair’s report – J. Lake.

5. Staff liaison’s report – T. Vecchiarelli.

6. NFPA 225 public comments.

7. NFPA 501 public comments.

8. NFPA 501A public comments.

9. Other business.

10. Next meeting – TBD.

11. Adjournment.

http://nfpa.adobeconnect.com/tracy/

Address List No PhoneManufactured Housing MAN-AAA

Tracy L. Vecchiarelli02/03/2016

MAN-AAA

John Lake

ChairCity of Gainesville306 NE 6th Avenue, Building BGainesville, FL 32602-0490

E 11/2/2006MAN-AAA

Fred Benn

PrincipalAdvanced Automatic Sprinkler, Inc.1947 San Ramon Valley BoulevardSan Ramon, CA 94583National Fire Sprinkler AssociationAlternate: Joshua Jones

M 11/2/2006

MAN-AAA

David G. Bueche

PrincipalHoover Treated Wood Products13768 West Asbury CircleLakewood, CO 80228

M 8/9/2011MAN-AAA

Stanley C. Harbuck

PrincipalSchool of Building InspectionPO Box 1643Salt Lake City, UT 84110American Public Health AssociationAlternate: Jake Pauls

C 11/2/2006

MAN-AAA

Thomas L. Harman

PrincipalUniversity of Houston-Clear Lake2700 Bay Area Blvd., Mail Stop 161Houston, TX 77058

SE 11/2/2006MAN-AAA

Christopher P. Jones

PrincipalChristopher P. Jones & Associates5525 Jomali DriveDurham, NC 27705FEMA/Mitigation DivisionAlternate: David K. Low

E 11/2/2006

MAN-AAA

John V. Loscheider

PrincipalLoscheider Engineering Company1618 Kennewick Avenue, NEPO Box 2440Renton, WA 98056-0440Building Seismic Safety Council/Code Resource SupportCommittee

U 11/2/2006MAN-AAA

Michael Lubliner

PrincipalWashington State UniversityExtension Energy Program905 Plum Street SE, Bldg. 3Box 43165Olympia, WA 98504-3165Northwest Energy Efficiency Alliance

U 11/2/2006

MAN-AAA

Ty J. Maltbie

PrincipalViega LLC2211 Viega AvenueMcPherson, KS 67460

M 10/20/2010MAN-AAA

Robert Parks

PrincipalHealthy Homes of Louisiana104 Cherokee DriveWest Monroe, LA 71291-1001

SE 08/17/2015

MAN-AAA

Bruce J. Swiecicki

PrincipalNational Propane Gas Association21200 South LaGrange Road, Suite 353Frankfort, IL 60423Alternate: David C. Delaquila

IM 3/4/2008MAN-AAA

Larry J. Tanner

PrincipalTexas Tech UniversityWind Science & Engineering Research CenterPO Box 41023Lubbock, TX 79409

RT 11/2/2006

1

Address List No PhoneManufactured Housing MAN-AAA

Tracy L. Vecchiarelli02/03/2016

MAN-AAA

Randy E. Vogt

PrincipalMinnesota Department of Labor & IndustryBuilding Codes & Standards UnitConstruction Codes & Licensing Division443 Lafayette Road NorthSt. Paul, MN 55155-4341

E 11/2/2006MAN-AAA

Dean C. Hunter

Voting AlternateMinnesota Department of Labor & IndustryPO Box 177Menahga, MN 56464International Association of Electrical Inspectors

E 10/23/2013

MAN-AAA

David C. Delaquila

AlternateAquila Consulting LLC1760 Portal Drive NEWarren, OH 44484-1135National Propane Gas AssociationPrincipal: Bruce J. Swiecicki

IM 08/17/2015MAN-AAA

Joshua Jones

AlternateFire Protection Industries (The Moran Group)115A Aster DriveHarrisburg, PA 17112Principal: Fred Benn

M 3/2/2010

MAN-AAA

David K. Low

AlternateDK Low & Associates, LLC4900 Summer LaneEarlysville, VA 22936FEMA/Mitigation DivisionPrincipal: Christopher P. Jones

E 11/2/2006MAN-AAA

Jake Pauls

AlternateJake Pauls Consulting Services255 Glenlake Avenue, Suite 2207Toronto, ON M6P 1G2 CanadaAmerican Public Health AssociationPrincipal: Stanley C. Harbuck

C 11/2/2006

MAN-AAA

Richard A. Mendlen

Nonvoting MemberUS Department of Housing & Urban DevelopmentManufactured Housing & Standards451 7th Street SW, Room 9164Washington, DC 20410-8000

E 11/2/2006MAN-AAA

Tracy L. Vecchiarelli

Staff LiaisonNational Fire Protection Association1 Batterymarch ParkQuincy, MA 02169-7471

01/04/2010

2

MAN‐AAA03/10/15FIRSTDRAFT MeetingMinutes / Page1

NFPA Technical Committee on Manufactured Housing NFPA 225, NFPA 501 and NFPA 501A FIRST DRAFT MEETING MINUTES

Web/Teleconference March 10, 2015

1. Call to Order. The meeting was called to order by Chair John Lake at 9:00 a.m. on

Tuesday, March 10, 2015 via Adobe Connect.

2. Introduction of Committee Members and Guests.

THE FOLLOWING TECHNICAL COMMITTEE MEMBERS PARTICIPATED:

NAME COMPANY John Lake, Chair City of Gainesville Tracy Vecchiarelli, Staff Liaison NFPA Fred Benn, Principal Advanced Automatic Sprinkler,

Inc./Representing National Fire Sprinkler Association

John Loscheider, Principal Loscheider Engineering Company/Representing Building Seismic Safety Council/Code Resource Support Committee

Michael Lubliner, Principal Washington State University/Representing Northwest Energy Efficiency Alliance

Bruce Swiecicki, Principal National Propane Gas Association Larry Tanner, Principal Texas Tech University Randy Vogt, Principal Minnesota Department of Labor &

Industry Dean Hunter, Alternate to R. Chilton Minnesota Department of Labor &

Industry David Low, Alternate to C. Jones DK Low & Associates, LLC/Representing

FEMA/Mitigation Division Richard Mendlen, Nonvoting US Department of Housing & Urban

Development

MAN‐AAA03/10/15FIRSTDRAFTMeetingMinutes / Page2

GUEST

NAME COMPANY

David Delaquila, Consultant National Propane Gas Association

TECHNICAL COMMITTEE MEMBERS WHO DID NOT PARTICIPATE (Whose Alternates Did Not Participate)

NAME COMPANY David Bueche, Principal Hoover Treated Wood Products Stanley Harbuck, Principal School of Building

Inspection/Representing American Public Health Association

Thomas Harman, Principal University of Houston-Clear Lake Ty Maltbie, Principal Viega LLC

3. Approval of the April 10, 2012 ROC Meeting Minutes -The minutes of the April 10, 2012 meeting were approved as written and submitted.

4. Chair’s Report – John Lake welcomed the committee.

5. Staff Liaison Report - T. Vecchiarelli reviewed the meeting procedures and introduced and reviewed the new process.

6. Public Inputs for NFPA 225 – The committee acted on and resolved the eight public inputs.

7. Public Inputs for NFPA 501 – The committee acted on and resolved the eighteen public inputs.

8. Public Inputs for NFPA 501A – The committee acted on and resolved the eight public inputs.

9. Other Business – No other business was discussed.

10. Next Meeting – The date of the Second Draft Meeting will be determined at a later date.

11. Adjournment - The meeting was adjourned at 11:45 am on Tuesday, March 10, 2015.

2/3/2016

1

NFPA Second Draft Meeting

Manufactured Housing

March 16, 2016 | Staff liaison: Tracy Vecchiarelli, P.E.: | Chair: John Lake


At this and all NFPA committee meetings we are concerned with your safety.

If the fire alarm sounds, please proceed to an exit.

nfpa.org 2


Members, please verify/update your contact information.

Use of visual or audio recording devices capable of reproducing verbatim transcriptions of this or any NFPA meeting is not permitted.

nfpa.org 3


Members categorized in ANY interest category who have been retained to represent the interests of ANOTHER interest category (with respect to a specific issue or issues that are to be addressed by a TC/CC) shall declare those interests to the committee and refrain from voting on any Public Input, Comment, or other matter relating to those issues throughout the process.

nfpa.org 4


Follow Robert’s Rules of Order.

Discussion requires a motion.

nfpa.org 5

General Procedures


Not in order when another has the floor

Requires a second

This motion is not debatable and DOES NOT automatically stop debate

A 2/3 affirmative vote will immediately close debate and return to the original motion on the floor. Less then 2/3 will allow debate to continue.

nfpa.org 6

Motions for Ending Debate Previous Question or “Call the Question”

2/3/2016

2


Member addresses the chair.

Receives recognition from the chair.

Introduces the motion.

Another member seconds the motion.

nfpa.org 7

Committee member actions


Enforcer, 4 Members: 29%

Insurance, 0 Members

Installer/Maintainer, 1 Members: 7%

Labor, 0 Members

Manufacturer, 3 Members: 21%

Research & Testing, 1 Member: 7%

Special Expert, 2 Members: 14%

User, 2 Members: 14%

Consumer, 0 Members:

nfpa.org 8


Comment Stage (Second Draft):Public Comment Closing Date: 11-16-2015Second Draft Meeting todayPosting of Second Draft for Balloting Date 6/13/16Posting of Second Draft for NITMAM 7/18/16

Tech Session Preparation:NITMAM Closing Date: 8/22/2016NITMAM /CAM Posting Date: 10/17/2016NFPA Annual Meeting: 6/4-7/2016

Standards Council Issuance:Issuance of Consent Documents: 2017 edition dateIssuance of Documents with CAM: 2017 edition date

nfpa.org 9

Timeline


Resolving Public Comments

Committee Action and Committee Statement

Creating Second Revisions

nfpa.org 10

Technical Committee Actions

nfpa.org 11


No “new material” after the Public Input Stage since it hasn’t had the benefit of public review.

What constitutes new material is decided by the TC or Correlating Committee.

Adding “new material” at this Comments stage could successfully be challenged through appeal to the NFPA Standards Council

nfpa.org 12

New material

2/3/2016

3


nfpa.org 13

Click link on the ballot email received

Sign in with NFPA.org Committee Login and Password


nfpa.org 14

Select either Affirmative on All or Affirmative with Exception(s)


nfpa.org 15

Use “See FR/SR - #” link to review all First/Second Revisions

Use “Edit election” to change individual votes or to modify vote after submitting ballot.


nfpa.org 16

Make selection: Affirmative with Comment, Negative, or Abstain

No selection made-defaults to affirmative

Must include comment on each vote.


nfpa.org 17

To complete ballot click Participant Consent and Submit

Return and edit any votes before ballot due date.

Legal

It is the policy of the NFPA to strictly comply with state and federal antitrust laws.

NFPA expects all participants in its standards development activities to conduct themselves in strict accordance with these laws.

It is the obligation of each participant to read and understand NFPA’s Antitrust Policy. (You can access this policy at nfpa.org/regs.)

nfpa.org 18

Antitrust Matters

2/3/2016

4

Legal

Participants must avoid any conduct, conversation or agreement that would constitute an unreasonable restraint of trade.

Conversation topics that are off limits include:• Profit, margin, or cost data;

• Prices, rates, or fees;

• Selection, division or allocation of sales territories, markets or customers;

• Refusal to deal with a specific business entity.

nfpa.org 19

Antitrust Matters (cont’d)

Legal

NFPA’s standards development activities are based on openness, honesty, fairness and balance.

Participants must adhere to the Regulations Governing the Development of NFPA Standards and the Guide for the Conduct of Participants in the NFPA Standards Development Process. (You can access the Regulationsand Guide at nfpa.org/regs.)

Follow guidance and direction from your employer or other organization you may represent.

Be sure to ask questions if you have them.

nfpa.org 20


Legal

Manner is which standards development activity is conducted can be important.

The Guide requires standards development activity to be conducted with openness, honesty and in good faith.

Participants are not entitled to speak on behalf of NFPA.

Participants must take appropriate steps to ensure their statements whether written or oral and regardless of the setting, are portrayed as personal opinions, not the position of NFPA.

Be sure to ask questions if you have them.nfpa.org 21


Legal

Disclosures of essential patent claims should be made by the patent holder.

Patent disclosures should be made early in the process.

Others may also notify NFPA if they believe that a proposed or existing NFPA standard includes an essential patent claim.

NFPA has adopted and follows ANSI’s Patent Policy.

It is the obligation of each participant to read and understand NFPA’s Patent Policy. (You can access this policy at nfpa.org/regs.)

nfpa.org 22

Patents

TC Struggles with an Issue

• TC needs data on a new technology or emerging issue

• Two opposing views on an issue with no real data

• Data presented is not trusted by committee

Code Fund Lends a Hand

• TC rep and/or staff liaison submits a Code Fund Request

• Requests are reviewed by a Panel and chosen based on need / feasibility

Research Project Carried Out

• Funding for project is provided by the Code Fund and/or industry sponsors

• Project is completed and data is available to TC

www.nfpa.org/codefund

Document Information PagesAbout

• Document scope• Table of contents• Articles• Research and

statistical reports• Latest codes and

standards news on NFPA Today blog feed

• Free access

Current and Previous Editions

• Issued TIAs, FIs, Errata

• Archived revision information such as meeting and ballot information, First Draft Reports (previously ROPs), Second Draft Reports (previously ROCs), and Standards Council and NITMAM information

Next Edition

• Revision cycle schedule

• Posting & closing dates

• Submit public input/comments via electronic submission system.

• Meeting and ballot information

• First Draft Report and Second Draft Report

• NITMAM information• Standard Council

Decisions• Private TC info (*red

asterisk)• Ballot circulations,

informational ballots and other committee info

Technical Committee

• Committee name and staff liaison

• Committee scope and responsibility

• Committee list with private information

• Committee documents (codes & standards) in PDF format

• Committees seeking members

• Online committee membership application

2/3/2016

5

Thank You

Public Comment No. 1-NFPA 225-2015 [ Chapter 2 ]

Chapter 2 Referenced Publications

2.1 General.

The documents or portions thereof listed in this chapter are referenced within this standard and shall beconsidered part of the requirements of this document.

2.2 NFPA Publications.

National Fire Protection Association, 1 Batterymarch Park, Quincy, MA 02169-7471.

NFPA 13D, Standard for the Installation of Sprinkler Systems in One- and Two-Family Dwellings andManufactured Homes, 2016 edition.

NFPA 70® , National Electrical Code®, 2017 edition.

NFPA 501, Standard on Manufactured Housing, 2017 edition.

NFPA 501A, Standard for Fire Safety Criteria for Manufactured Home Installations, Sites, and Communities,2017 edition.

NFPA 720, Standard for the Installation of Carbon Monoxide (CO) Detection and Warning Equipment, 2015edition.

NFPA 750, Standard on Water Mist Fire Protection Systems, 2015 edition.

NFPA 1192, Standard on Recreational Vehicles, 2014 edition.

NFPA 5000® , Building Construction and Safety Code®, 2015 edition.

2.3 Other Publications.

2.3.1 ANSI Publications.

American National Standards Institute, Inc., 25 West 43rd Street, 4th Floor, New York, NY 10036.

ANSI/RVIA A119.5, Recreational Park Trailers, 2009 2015 .

2.3.2 ASCE Publications.

American Society of Civil Engineers, 1801 Alexander Bell Drive, Reston, VA 20191.

ASCE/SEI 7, Minimum Design Loads for Buildings and Other Structures, 2005 2010 .

ASCE/SEI 24, Flood Resistant Design and Construction, 2014.

2.3.3 ASTM Publications.

ASTM International, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.

ASTM C90, Standard Specification for Loadbearing Concrete Masonry Units, 2014.

ASTM D3953, Standard Specification for Strapping, Flat Steel and Seals, 2013.

ASTM D4318, Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils, 2010 e1 ,e1 editorial change 1, 2014 .

ASTM E84, Standard Test Method for Surface Burning Characteristics of Building Materials, 2014 2015A .

2.3.4 UL Publications.

Underwriters Laboratories Inc., 333 Pfingsten Road, Northbrook, IL 60062-2096.

UL 723, Standard for Test for Surface Burning Characteristics of Building Materials, 2008, Revised 2013.

National Fire Protection Association Report http://submittals.nfpa.org/TerraViewWeb/ContentFetcher?commentPara...

1 of 9 2/3/2016 2:10 PM

2.3.5 U.S. Government Publications.

U.S. Government Printing Publishing Office, 732 North Capitol Street, NW., Washington DC , DC20402 20401-0001 .

Title 24, Code of Federal Regulations, Part 3280, Manufactured Home Construction and Safety Standards.

Title 24, Code of Federal Regulations, Part 3282, Manufactured Home Procedural and EnforcementRegulations.

Title 24, Code of Federal Regulations, Part 3285, Model Manufactured Home Installation Standard.

2.3.6 USGS Publications.

United States Geological Survey National Center, 12201 Sunrise Valley Drive, Reston, VA 20192.

Seismic Design Category Map, 2000.

2.3.7 Other Publications.

Merriam-Webster’s Collegiate Dictionary, 11th edition, Merriam-Webster, Inc., Springfield, MA, 2003.

2.4 References for Extracts in Mandatory Sections.



Statement of Problem and Substantiation for Public Comment

Referenced current SDO names, addresses, standard names, numbers, and editions.

Related Public Comments for This Document

Related Comment Relationship

Public Comment No. 6-NFPA 225-2015 [Section No. E.1.2]

Related Item

First Revision No. 1-NFPA 225-2015 [Chapter 2]

Submitter Information Verification

Submitter Full Name: Aaron Adamczyk

Organization: [ Not Specified ]

Street Address:

City:

State:

Zip:

Submittal Date: Sun Oct 11 21:54:47 EDT 2015


2 of 9 2/3/2016 2:10 PM

Public Comment No. 4-NFPA 225-2015 [ Section No. 2.2 ]

2.2 NFPA Publications.

National Fire Protection Association, 1 Batterymarch Park, Quincy, MA 02169-7471.

NFPA 13D, Standard for the Installation of Sprinkler Systems in One- and Two-Family Dwellings andManufactured Homes, 2016 edition.

NFPA 70® , National Electrical Code®, 2017 edition.

NFPA 286, Standard Methods of Fire Tests for Evaluating Contribution of Wall and Ceiling Interior Finish toRoom Fire Growth, 2015 edition

NFPA 501, Standard on Manufactured Housing, 2017 edition.


NFPA 720, Standard for the Installation of Carbon Monoxide (CO) Detection and Warning Equipment, 2015edition.

NFPA 750, Standard on Water Mist Fire Protection Systems, 2015 edition.

NFPA 1192, Standard on Recreational Vehicles, 2014 edition.



Consistent with the proposed addition to 7.7.4



Public Comment No. 3-NFPA 225-2015 [Section No. 7.7.4]

Related Item



Submitter Full Name: Marcelo Hirschler

Organization: GBH International

Street Address:

City:

State:

Zip:

Submittal Date: Fri Nov 06 15:58:59 EST 2015


3 of 9 2/3/2016 2:10 PM

Public Comment No. 2-NFPA 225-2015 [ Section No. 2.3.3 ]


ASTM International, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.

ASTM C90, Standard Specification for Loadbearing Concrete Masonry Units,2014.

ASTM D3953, Standard Specification for Strapping, Flat Steel and Seals,2013 2015 .

ASTM D4318, Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils, 2010, e1.

ASTM E84, Standard Test Method for Surface Burning Characteristics of Building Materials, 2014 2015a .


update

Related Item





Street Address:

City:

State:

Zip:



4 of 9 2/3/2016 2:10 PM


7.7.4 Unfinished Gypsum Wallboard.

7.7.4.1

Homes shipped with unfinished gypsum wallboard and/or ceiling shall be finished on site.

7.7.4.2

The interior finishes shall have the following maximum flame spread index values measured in accordancewith ASTM E84, Standard Test Method for Surface Burning Characteristics of Building Materials, or withANSI/UL 723, Standard for Test for Surface Burning Characteristics of Building Materials.

(1) Ceilings — 75

(2) Walls — 75

(3) General — 200

(4) Adjacent to cooking range — 50

(5) Adjacent to or enclosing a furnace or water heater — 25

7.7.4.3 Interior finishes that comply with the requirements in this section when tested to NFPA 286 shall bepermitted to be used for all the applications in 7.7.4.2.

(1) During the 40 kW exposure, flames shall not spread to the ceiling.

(2) The flame shall not spread to the outer extremity of the sample on any wall or ceiling.

(3) Flashover, as described in NFPA 286, shall not occur.

(4) The peak heat release rate throughout the test shall not exceed 800 kW.

Also, add NFPA 286, Standard Methods of Fire Tests for Evaluating Contribution of Wall and CeilingInterior Finish to Room Fire Growth (2015), into chapter 2 in the section on referenced NFPA standards.


This change does not introduce any new materials or any new requirements. It helps in that it allows an alternate approach to testing for existing materials but no material is required to be tested in a different way.

All codes (including the Life Safety Code, NFPA 101, the NFPA building code,NFPA 5000, and the equivalent ICC codes) recognize that testing to NFPA 286 (a room-corner test) is equivalent (or even superior) to testing to ASTM E84 or UL 723 when addressing interior finish materials. All codes recognize that a material tested to NFPA 286 and complying with the criteria shown is equivalent (or better) than a material with a flame spread index of 25 in ASTM E84 or UL 723. In fact a number of interior finish materials are not permitted to be tested to ASTM E84 (or UL 723) but are only allowed to be tested to NFPA 286 because it is more appropriate. Therefore some interior finish materials have already been tested to NFPA 286 and therefore do not need to be tested again to ASTM E84 (see Chapter 10 of NFPA 101 or of NFPA 5000).

This information is already included in NFPA 501 and this simply provides correlation.



Public Comment No. 4-NFPA 225-2015 [Section No. 2.2]

Related Item



5 of 9 2/3/2016 2:10 PM




Street Address:

City:

State:

Zip:



6 of 9 2/3/2016 2:10 PM

Public Comment No. 5-NFPA 225-2015 [ Section No. 11.2 ]

11.2 Fire Sprinkler Systems.

Manufacturers shall provide installers with instructions on how to perform connect the following:Connect thefire sprinkler systems system to an approved water supply capable of supplying the demand of the fire sprinklersystem Inspect and how to inspect and retest the fire sprinkler system during installation of the home to ensurethe fire sprinker system is installed in accordance with NFPA 13D Provide , and manufacturers shall providehomeowners with the operating and testing information from the fire sprinkler system installer .


As written, Item 3 does not read well with the charging statement. It should be a sentence on its own. Also, it is clear that this section, which is needed, is trying to follow the format of the provisions for smoke alarms and CO detection. This Public Comment suggests to change the wording because it is easier to read.

Related Item



Submitter Full Name: Jim Muir

Organization: Building Safety Division, Clark County, WA

Affilliation: NFPAs Building Code Development Committee (BCDC)

Street Address:

City:

State:

Zip:

Submittal Date: Mon Nov 09 20:19:23 EST 2015


7 of 9 2/3/2016 2:10 PM

Public Comment No. 6-NFPA 225-2015 [ Section No. E.1.2 ]

E.1.2 Other Publications.

E.1.2.1 ANSI Publications.

American National Standards Institute, Inc., 25 West 43rd Street, 4th Floor, New York, NY10036.ANSI/AF&PA Wood Council (AWC), 222 Catoctin Circle SE, Suite 201, Leesburg, VA 20175 .

AWC WFCM , Wood Frame Construction Manual (WFCM) for One- and Two-Family Dwellings, 20122015 .

E.1.2.2 ASCE Publications.

American Society of Civil Engineers, 1801 Alexander Bell Drive, Reston, VA 20191-4400.

ASCE/SEI 7, Minimum Design Loads for Buildings and Other Structures, 2005.

E.1.2.3 ASTM Publications.

ASTM International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959.

ASTM C90, Standard Specification for Loadbearing Concrete Masonry Units, 2014.

E.1.2.4 FEMA Publications.

Federal Emergency Management Agency, Washington, DC 20472.

FEMA P-85, Manufactured Home Installation in Flood Hazard Areas, September 2009.

FEMA P-348, Protecting Building Utilities from Flood Damage, November 1999.

FEMA Form 81-31, National Flood Insurance Program Elevation Certificate and Instructions, 2009.

E.1.2.5 NFIP Publications.

FEMA National Flood Insurance Program, 500 C Street, SW, Washington, DC 20472.

Community Status Book

Technical Bulletin 2, Flood Damage-Resistant Materials Requirements for Buildings Located in SpecialFlood Hazard Areas, August 2008.

E.1.2.6 U.S. Government Publications.

U.S. Government Printing Publishing Office, 732 North Capitol Street, NW, Washington, DC20402 20401-0001 .

HUD Handbook 4930.3G, Permanent Foundations Guide for Manufactured Housing.

Title 24, Code of Federal Regulations, Part 3280, Manufactured Home Construction and Safety Standards(MHCSS).

Title 24, Code of Federal Regulations, Part 3282, Manufactured Home Procedural and EnforcementRegulations.

Title 42, United States Code, Part 5401.

Title 44, Code of Federal Regulations, Part 60.3.


Referenced current addresses, standard editions.



Public Comment No. 1-NFPA 225-2015[Chapter 2]

Referenced current SDO names, addresses, standard names,numbers, and editions.


8 of 9 2/3/2016 2:10 PM

Related Item

First Revision No. 5-NFPA 225-2015 [Chapter E]


Submitter Full Name: Aaron Adamczyk

Organization: [ Not Specified ]

Street Address:

City:

State:

Zip:

Submittal Date: Wed Nov 11 00:08:12 EST 2015


9 of 9 2/3/2016 2:10 PM



1 of 7 2/3/2016 2:12 PM



2 of 7 2/3/2016 2:12 PM


ASTM A53/53M, Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded andSeamless, 2012.

ASTM A74, Standard Specification for Cast Iron Soil Pipe and Fittings, 2013a 2015 .

ASTM A539, Standard Specification for Electric-Resistance-Welded Coiled Steel Tubing for Gas and FuelOil Lines, 2009 1999 (withdrawn 2004, without replacement) .

ASTM B42, Standard Specification for Seamless Copper Pipe, Standard Sizes, 2010 2015a .

ASTM B43, Standard Specification for Seamless Red Brass Pipe, Standard Sizes, 2014 2015 .

ASTM B88, Standard Specification for Seamless Copper Water Tube, 2014.

ASTM B251, Standard Specification for General Requirements for Wrought Seamless Copper andCopper-Alloy Tube, 2010.

ASTM B280, Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration FieldService, 2013.

ASTM B306, Standard Specification for Copper Drainage Tube (DWV), 2013.

ASTM C36/36M, Standard Specification for Gypsum Wallboard, 2003 (withdrawn, replaced byC1396/C1396M).

ASTM 36M, Standard Specification for Gypsum Wallboard , 2003 (withdrawn, replaced byC1396/C1396M).ASTM C564, Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe andFittings, 2014.

ASTM C920, Standard Specification for Elastomeric Joint Sealants, 2014a.

ASTM C1396/C1396M, Standard Specification for Gypsum Board, 2014a.

ASTM D781, Standard Test Methods for Puncture and Stiffness of Paperboard, and Corrugated and SolidFiberboard, 1968 (1973) (withdrawn 1984 without replacement).

ASTM D2235, Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) PlasticPipe and Fittings, 2004 (2011).

ASTM D2239, Standard Specification for Polyethylene (PE) Plastic Pipe, (SDR-PR) Based on ControlledInside Diameter, 2012a.

ASTM D2564, Standard Specification for Solvent Cement for Poly (Vinyl Chloride) (PVC) Plastic PipingSystems, 2012.

ASTM D2609, Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe,2002(2008) 2015 .

ASTM D2661, Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain,Waste, and Vent Pipe and Fittings, 2011 2014 .

ASTM D2665, Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipeand Fittings, 2014.

ASTM D2846/D2846M, Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Hot-and Cold-Water Distribution Systems, 2009b e1 2014 .

ASTM D3309, Standard Specification for Polybutylene (PB) Plastic Hot- and Cold-Water DistributionSystems, 1996a (2002) (withdrawn 2010, without replacement).

ASTM D3311, Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings, 2011.

ASTM D3953, Standard Specification for Strapping, Flat Steel, and Seals, 2013 2015 .

ASTM D4442, Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-BaseMaterials, 2007 2015 .

ASTM D4444, Standard Test Methods for Use and Calibration of Hand-Held Moisture Meters, 2013.

ASTM D4635, Standard Specification for Low-Density Polyethylene Films for General Use and PackagingApplications, 2008a.

ASTM E84, Standard Test Method for Surface Burning Characteristics of Building Materials, 2014 2015a .

ASTM E96/E96M, Standard Test Methods for Water Vapor Transmission of Materials, 2013 2015 .


3 of 7 2/3/2016 2:12 PM

ASTM E119, Standard Test Method for Fire Tests of Building Construction and Materials, 2014 2015 .

ASTM E136, Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750°C , 2012.

ASTM E773, Standard Test Method for Accelerated Weathering of Sealed Insulating Glass Units, 2001(withdrawn 2010 without replacement).

ASTM E162, Standard Test Method for Surface Flammability of Materials Using a Radiant Heat EnergySource, 2013 2015a .

ASTM E773, Standard Test Method for Accelerated Weathering of Sealed Insulating Glass Units, 2001(withdrawn 2010 without replacement).

ASTM E774, Standard Specification for the Classification of the Durability of Sealed Insulating Glass Units,1997 (withdrawn 2006 without replacement).

ASTM E970, Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using aRadiant Heat Energy Source, 2014.

ASTM E1333, Standard Test Method for Determining Formaldehyde Levels from Wood Products UnderDefined Test Conditions Using a Large Chamber, 2010 2014 .

ASTM E2652, Standard Test Method for Behavior of Materials in a Tube Furnace with a Cone-shapedAirflow Stabilizer, at 750°C, 2012.

ASTM F438, Standard Specification for Socket-Type Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic PipeFittings, Sch. 40, 2009 2015 .

ASTM F439, Standard Specificationf for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings,Sch. 80, 2013.

ASTM F441/F441M, Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe, Sch.40 and 80, 2013 e1 2015 .

ASTM F493, Standard Specification for Solvent Cements for Chlorinated Poly (Vinyl Chloride) (CPVC)Plastic Pipe and Fittings , 2010 2014 .

ASTM F628, Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain,Waste, and Vent Pipe with a Cellular Core, 2012 e1.

ASTM F628, Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain,Waste, and Vent Pipe with a Cellular Core , 2012 e1. ASTM F876, Standard Specification for CrosslinkedPolyethylene (PEX) Tubing, 2013a 2015 .

ASTM F877, Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-WaterDistribution Systems, 2011a.

ASTM F986, Standard Specification for Suction Strainer Boxes, 1986(2014).

ASTM F1281, Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene(PEX-AL-PEX) Pressure Pipe, 2011.

ASTM FF1282 F1282 , Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE)Composite Pressure Pipe, 2010.

ASTM F1807, Standard Specification for Metal Insert Fittings Utilizing Copper Crimp Ring for SDR 9Crosslinked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing,2014 2015 .

ASTM F1960, Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use withCrosslinked Polyethylene (PEX) Tubing, 2014 2015 .

ASTM F1961, Standard Specification for Metal Mechanical Cold Flare Compression Fittings with DiscSprings for Crosslinked Polyethylene (PEX) Tubing, 2009.

ASTM F1974, Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene andCrosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe, 2009.

ASTM F2080, Standard Specification for Cold-Expansion Fittings with Metal Compression Sleeves forCross-Linked Polyethylene (PEX) Pipe, 2012 e1 2015 .



4 of 7 2/3/2016 2:12 PM

Updates - also deleted two duplicates

Related Item

First Revision No. 7-NFPA 501-2015 [Section No. 14.3.13]




Street Address:

City:

State:

Zip:



5 of 7 2/3/2016 2:12 PM

Public Comment No. 9-NFPA 501-2015 [ Section No. D.1.2.2 ]

D.1.2.2 ASTM Publication.


ASTM E903, Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of MaterialsUsing Integrating Spheres, 1996, reinstated 2012.


update

Related Item

First Revision No. 9-NFPA 501-2015 [Chapter D]




Street Address:

City:

State:

Zip:



6 of 7 2/3/2016 2:12 PM

Public Comment No. 10-NFPA 501-2015 [ Section No. D.1.2.4 ]

D.1.2.4 ICC Publication.

International Code Council, 5203 Leesburg Pike, Suite 600, Falls Church, Virginia 22041.

ICC 500, Standard for the Design and Construction of Storm Shelters, 2008 2013 .


update

Related Item

First Revision No. 9-NFPA 501-2015 [Chapter D]




Street Address:

City:

State:

Zip:



7 of 7 2/3/2016 2:12 PM