Sensor - #1 Source For Building Automation, HVAC, …midwestbas.com/store/media/pdf/tac/SENSOR_PRODUCT_LINE... · 2008-05-16 · --- --- TT-D Immersion Temperature Sensors Description

SensorProduct Portfolio

Sensor Product PortfolioTable of Contents

Temperature Sensors

Room Temperature Sensors .....................................................................................................Page 1

Duct Temperature Sensors .......................................................................................................Page 4

Immersion Temperature Sensors ..............................................................................................Page 4

Averaging Temperature Sensors ..............................................................................................Page 4

Outside Air Temperature Sensors .............................................................................................Page 5

Strap-On Temperature Sensors ................................................................................................Page 5

Bead Temperature Sensors .......................................................................................................Page 5

Humidity Sensors

Room Humidity Sensors ..........................................................................................................Page 6

Duct Humidity Sensors ............................................................................................................Page 7

Outside Air Humidity Sensors .................................................................................................Page 7

CO2 Sensors

CO2 Room Sensors ...................................................................................................................Page 8

CO2 Duct Sensors ....................................................................................................................Page 8

Pressure Sensors

Dry Media Panel Pressure Sensors ...........................................................................................Page 8

Dry Media Duct Pressure Sensors ............................................................................................Page 8

Wet Media Pressure Sensors ....................................................................................................Page 9

Gauge Pressure Sensors ...........................................................................................................Page 9

1

Room Temperature Sensors

DescriptionTAC Vista 1.8k ohm

I/NET 10k ohm, T2

Continuum 10k ohm, T3

Room Temperature Sensor

• 32 to 120°F (0 to +50°C), Max. 95% RH• Accuracy of +/- 0.65°F (0.35°C)

STR100 --- ---


• 32 to 120°F (0 to +50°C), Max. 90% RH• Accuracy of +/- 0.55°F (0.30°C)• 3-Pole Stereo Jack

--- STR200 ---


• 32 to 120°F (0 to +50°C), Max. 90% RH• Accuracy of +/- 0.55°F (0.30°C)• 3-Pole Stereo Jack• With Setpoint Offset & Bypass

---

STR202 ---


• 32 to 120°F (0 to +50°C), Max. 95% RH• Accuracy of +/- 0.65°F (0.35°C)• With Mode Indicator• Modular RJ-10 Jack

STR101 --- ---


• 32 to 120°F (0 to +50°C), Max. 95% RH• Accuracy of +/- 0.65°F (0.35°C)• With Mode Indicator & Setpoint Offset• Modular RJ-10 Jack

STR102 --- ---


• 32 to 120°F (0 to +50°C), Max. 95% RH• Accuracy of +/- 0.65°F (0.35°C)• With Mode Indicator & Bypass• Modular RJ-10 Jack

STR103 --- ---


• 32 to 120°F (0 to +50°C), Max. 95% RH• Accuracy of +/- 0.65°F (0.35°C)• With Mode Indicator, Setpoint Offset & Bypass• Modular RJ-10 Jack

STR104 --- ---


• 32 to 120°F (0 to +50°C), Max. 95% RH• Accuracy of +/- 0.65°F (0.35°C)• With Mode Indicator, Setpoint Offset, Bypass &

3-Speed Fan Speed Control• Modular RJ-10 Jack

STR106 --- ---


• 32 to 120°F (0 to +50°C), Max. 95% RH• Accuracy of +/- 0.65°F (0.35°C)• With Mode Indicator, Setpoint Offset, Bypass &

Auto-Off-On Fan Speed Control• Modular RJ-10 Jack

STR107 --- ---

Room Temperature Sensors (continued)


I/NET 10k ohm, T2



• 32 to 122°F (0 to +50°C), Max. 90% RH• Accuracy of +/- 0.9°F (0.5°C)• With Mode Indicator, Setpoint Offset, Bypass & Fan Speed Control• LCD Display

STR150 --- ---


• 32 to 122°F (0 to +50°C), Max. 90% RH• Accuracy of +/-1°F (0.6°C)• With Mode Indicator, Setpoint Offset, Bypass & Fan Speed Control• LCD Display

STR250 STR250 ---


• 32 to 122°F (0 to +50°C), Max. 90% RH• Accuracy of +/-1°F (0.6°C)• Lonworks• With Mode Indicator, Setpoint Offset, Bypass & Fan Speed Control• Multifunction: Light Control, Blind Control, CO2 Display, RH Display• LCD Display (STR351 LCD Display has Backlight)

STR350, STR351

--- ---


• 32 to 105°F (0 to +40°C)• Accuracy of +/- 0.36°F (0.2°C)• Optional No Logo Version• Andover Controls Logo Versions Available Through 2nd Qtr 2006/ TAC Labeled Versions Coming Soon

---

---

---

---

TTS-S-1

TTS-S-B-1


• 32 to 105°F (0 to +40°C)• Accuracy of +/- 0.36°F (0.2°C)• Setpoint Adjustment Slider• Override Pushbutton• Programmable LED Indicator• Built-in Service Port• Optional No Logo Version• Optional No Slider Version• Optional No Logo/No Slider Version• Andover Controls Logo Versions Available Through 2nd Qtr 2006/

TAC Labeled Versions Coming Soon

---

---------

---

---------

TTS-SE-1

TTS-SE-B-1TTS-SE-NS-1TTS-SE-BNS-1


• 32 to 105°F (0 to +40°C)• Accuracy of +/- 0.36°F (0.2°C)• 4-Digit LCD Display• 6-Button Programmable Keypad• Programmable Icons (PM, %, °, Setpoint, Cool, Heat, CFM, Fan, OA, SP)• Built-in Service Port• Powered Directly From Controller• Optional Two 7-Segment LED Display• Optional No Logo Version• Optional 4-Button Version (No Logo)• Andover Controls Logo Versions Available Through 2nd Qtr 2006/


---

---

---

---

TTS-SD-LCD-1

TTS-SD-LED-1TTS-SD-LCD-B-1TTS-SD-LED-B-1TTS-SD-LCD-4-2

Stainless Steel Wallplate Temperature Sensor

• 32 to 105°F (0 to +40°C)• Accuracy of +/- 0.36°F (0.2°C)• Stainless Steel Wallplate Insulated With Foil-Backed Foam• No Logo• Optional Version With Security Screws (No Logo)

---

---

---

---

01-0100-295

01-0100-296

2

3

Room Temperature Sensors (continued)


I/NET 10k ohm, T2



• -40° to 302°F (-40° to 150°C) • Accuracy of ±0.36°F (0.2°C)• Optional Thermometer Indicator (-TI)• Optional LCD Display (-LCD)• Optional LED Display (-LED)• Optional RS232 (-RS232)• Optional RJ4 Communication Jack (-RJ4)• Optional RJ6 Communication Jack (-RJ6)

ETR100 ETR200 ETR500


• -40° to 302°F (-40° to 150°C) • Accuracy of ±0.36°F (0.2°C)• Setpoint Indicator (55°F to 85°F)• Optional Thermometer Indicator (-TI)• Optional LCD Display (-LCD)• Optional LED Display (-LED)• Optional RS232 (-RS232)• Optional RJ4 Communication Jack (-RJ4)• Optional RJ6 Communication Jack (-RJ6)



• -40° to 302°F (-40° to 150°C) • Accuracy of ±0.36°F (0.2°C)• Override Pushbutton• Optional Thermometer Indicator (-TI)• Optional LCD Display (-LCD) • Optional LED Display (-LED)• Optional RS232 (-RS232)• Optional RJ4 Communication Jack (-RJ4)• Optional RJ6 Communication Jack (-RJ6)



• -40° to 302°F (-40° to 150°C) • Accuracy of ±0.36°F (0.2°C)• Setpoint Indicator (55°F to 85°F)• Override Pushbutton• Optional Thermometer Indicator (-TI)• Optional LCD Display (-LCD)• Optional LED Display (-LED)• Optional RS232 (-RS232)• Optional RJ4 Communication Jack (-RJ4)• Optional RJ6 Communication Jack (-RJ6)


Stainless Steel Wallplate Temperature Sensor

• -40° to 302°F (-40° to 150°C) • Accuracy of ±0.36°F (0.2°C)• Stainless Steel Wallplate With Foam Insulation Pad• No Logo

ETP100 ETP200 ETP500

4

Duct Temperature Sensors


I/NET 10k ohm, T2


Duct Temperature Sensor

• -40° to 302°F (-40° to 150°C) • Accuracy of ±0.36°F (0.2°C)• Stainless Steel Probe• Foam Backed Metal Enclosure• Available Lengths of 4, 6, 8, 12 inches (-4, -6, -8, -12)• Optional Version Without Enclosure (-NE)

ETD100 ETD200 ETD500

Duct Temperature Sensor

• -30 to 230°F (-34 to +110°C)• Accuracy of ±0.36°F (0.2°C)• Stainless Steel Probe (Replaceable)• Plastic Enclosure• Available Lengths of 4, 6, 9, 15.75 inches (-4-1, -6-1, -9-1, -15.75-1)• Andover Controls Logo Versions Available Through 2nd Qtr 2006/


--- --- TT-D

Immersion Temperature Sensors


I/NET 10k ohm, T2


Immersion Temperature Sensor

• -40° to 302°F (-40° to 150°C) • Accuracy of ±0.36°F (0.2°C)• 1/4" Stainless Steel Probe• Foam Backed Metal Enclosure• Separately Ordered Brass or Stainless Steel Wells• Available Lengths of 4 and 6 Inches (-4, -6)

ETI100 ETI200 ETI500

Immersion Temperature Sensor

• -30 to 230°F (-34 to +110°C)• Accuracy of ±0.36°F (0.2°C)• Stainless Steel Probe (Replaceable)• Plastic Enclosure• Separately Ordered Brass or Stainless Steel Wells in 1/2" or 3/4" NPT• Available Lengths of 4 and 6 inches (-4-1, -6-1)• Andover Controls Logo Versions Available Through 2nd Qtr 2006/


--- --- TT-I

Averaging Temperature Sensors


I/NET 10k ohm, T2


Averaging Temperature Sensor

• -40° to 302°F (-40° to 150°C) • Accuracy of ±0.36°F (0.2°C)• Bendable Copper• Foam Backed Metal Enclosure• Available Lengths of 8, 12, 24 Feet (-8, -12, -24)

ETA100 ETA200 ETA500

5

Outside Air Temperature Sensors


I/NET 10k ohm, T2


Outside Air Temperature Sensor

• -40 to 302°F (-40 to +150°C)• Accuracy of ±0.36°F (0.2°C)• Weatherproof Enclosure

ETO100 ETO200 ETO500

Strap-On Temperature Sensors


I/NET 10k ohm, T2


Strap-On Temperature Sensor

• -40 to 302°F (-40 to +150°C)• Accuracy of ±0.36°F (0.2°C)• Metal Enclosure• 1.5 Inch Copper Plate With Foam-Backed Pad• Stainless Steel Strap• Fits Up to 5 Inch Diameter Pipes

ETS100 ETS200 ETS500

Strap-On Temperature Sensor

• -30 to 230°F (-34 to +110°C)• Accuracy of ±0.36°F (0.2°C)• Plastic Enclosure• Aluminum Mounting Disk• Stainless Steel Strap• Fits 2 to 6 Inch Diameter Pipes• Andover Controls Logo Versions Available

Through 2nd Qtr 2006/TAC Labeled Versions Coming Soon

--- --- TT-ST

Bead Temperature Sensors


I/NET 10k ohm, T2


Bead Temperature Sensor

• -35 to 140°F (1.7 to +60°C)• Accuracy of ±0.36°F (0.2°C)• Attached 8 Foot Leads• Optional Ruggedized Version (-30 to 230°F (-34 to +110°C))

---

---

---

---

01-2085-001

01-2085-001-R

Bead Temperature Sensor

• -40 to 302°F (-40 to +150°C)• Accuracy of ±0.36°F (0.2°C)• 1 Inch x 1/4 Inch O.D. Stainless Steel Probe• Attached 18 Inch Leads

ETB100 ETB200 ETB500

6

Room Humidity Sensors


I/NET 10k ohm, T2


Room Humidity Sensor

• 2% RH Accuracy• Selectable 4-20 mA, 0-10 V• 24 VAC / 15…36 VDC Power• Optional 1.8K Thermistor /10K T2 Thermistor (-T)• Optional 1.8K Thermistor /10K T3 Thermistor (-T5)

SHR100

SHR100-TSHR100-T5

SHR100

SHR100-TSHR100-T5

---

---SHR100-T5


• 2% RH Accuracy• Factory Calibrated / Field Replaceable Sensor Element• 2-Wire 4-20 mA Output (-MA-AC)• 3-Wire 0-5/0-10 VDC Output (-V-AC)• 12-24 VDC/24 VAC (VDC Model)• 12-24 VDC Only (mA Model)• Optional Version with 10K Type 3 Thermistor• Andover Controls Logo Versions Available Through 2nd Qtr 2006

---

---

---

---

ZVW-2

ZVW/10K-2


• 3% RH Accuracy• Factory Calibrated / Field Replaceable Sensor Element• 2-Wire 4-20 mA Output (-MA-AC)• 3-Wire 0-5/0-10 VDC Output (-V-AC)• 12-24 VDC/24 VAC (VDC Model)• 12-24 VDC Only (mA Model)• Optional Version with 10K Type 3 Thermistor• Andover Controls Logo Versions Available Through 2nd Qtr 2006

---

---

---

---

ZVW-3

ZVW/10K-3


• 2% RH Accuracy• 10K Type 3 Thermistor• Setpoint Slider, 10K Potentiometer, Override Buttons, Shorts

Thermistor, LED u/ 820 Ohm Resistor• Factory Calibrated / Field Replaceable Sensor Element• 2-Wire 4-20 mA Output (-MA-AC)• 3-Wire 0-5/0-10 VDC Output (-V-AC)• 12-24 VDC/24 VAC (VDC Model)• 12-24 VDC Only (mA Model)• Andover Controls Logo Versions Available Through 2nd Qtr 2006

--- --- ZVW/SE-2


• 3% RH Accuracy• 10K Type 3 Thermistor• Setpoint Slider, 10K Potentiometer, Override Buttons, Shorts

Thermistor, LED u/ 820 Ohm Resistor• Factory Calibrated / Field Replaceable Sensor Element• 2-Wire 4-20 mA Output (-MA-AC)• 3-Wire 0-5/0-10 VDC Output (-V-AC)• 12-24 VDC/24 VAC (VDC Model)• 12-24 VDC Only (mA Model)• Andover Controls Logo Versions Available Through 2nd Qtr 2006

--- ---

ZVW/SE-3

7

Room Humidity Sensors (continued)


I/NET 10k ohm, T2



• 2% RH Accuracy• Jumper Selectable 4-20 mA, 0-1 V, 0-10 V, 0-5 V Output• 17 to 37 VAC/DC Power• Integral Zero and Span Adjustments• Plastic Enclosure• Optional Thermistor

EHR100

EHR100-100

EHR100

EHR100-200

EHR100

EHR100-500

Room Humidity Sensor with LCD

• 2% RH Accuracy• LCD Display (Displays RH Only)• 4-20 mA Output• 17 to 37 VAC/DC Power• Integral Zero and Span Adjustments• Plastic Enclosure

EHR100-LCD EHR100-LCD EHR100-LCD

Duct Humidity Sensors


I/NET 10k ohm, T2


Duct Humidity Sensor

• 2% RH Accuracy• 9 Inch Stainless Steel Probe• Jumper Selectable 4-20 mA, 0-1 V, 0-10 V, 0-5 V Output• 17 to 37 VAC/DC Power• Integral Zero and Span Adjustments• Plastic Enclosure• Optional LCD Display (-LCD) (Displays RH Only)• Optional Thermistor

EHD100

EHD100-LCDEHD100-100

EHD100


EHD100


Outside Air Humidity Sensors


I/NET 10k ohm, T2


Outdoor Air Humidity Sensor

• 2% RH Accuracy• Jumper Selectable 4-20 mA, 0-1 V, 0-10 V, 0-5 V Output• 17 to 37 VAC/DC Power• Integral Zero and Span Adjustments• NEMA 4 Enclosure• Optional Thermistor

EHO100

EHO100-100

EHO100

EHO100-200

EHO100

EHO100-500

8

CO2 Room Sensors


I/NET 10k ohm, T2


Room CO2 Sensor

• 0-10 V / 0-5 V• 0-2000 ppm• 24 VAC• 1.8K Thermistor for TAC Vista• 10K Type 2 Thermistor for I/NET• 10K Type 3 Thermistor for Continuum™

SCR100 SCR100 SCR100

Dry Media Panel Pressure Sensors

Description TAC Vista I/NET Continuum

Panel Differential Pressure Transducer - Dry Media

• 12-30 VDC/24 VAC Supply Voltage• Field Selectable 4-20mA, 0-5/0-10V Output• Pushbutton and Remote Zero Adjustment• 4 Field Selectable Bidirectional Ranges:

±0.1/±0.25/±0.5/±1.0” W.C.• 4 Field Selectable Bidirectional

Ranges: ±1.0/±2.5/±5.0/±10” W.C.• Optional LCD Display (-LCD)

EPP101

EPP102

EPP101

EPP102

EPP101

EPP102

Dry Media Duct Pressure Sensors

Description TAC Vista I/NET Continuum

Duct Differential Pressure Transducer - Dry Media

• 12-30 VDC/24 VAC Supply Voltage• Field Selectable 4-20 mA, 0-5/0-10V Output• Pushbutton and Remote Zero Adjustment• 4 Field Selectable Bidirectional Ranges:

±0.1/±0.25/±0.5/±1.0” W.C.• 4 Field Selectable Bidirectional Ranges:

±1.0/±2.5/±5.0/±10” W.C.• Optional LCD Display (-LCD)

EPD101

EPD102

EPD101

EPD102

EPD101

EPD102

CO2 Duct Sensors


I/NET 10k ohm, T2


Duct CO2 Sensor

• 0-10 V / 0-5 V• 0-2000 ppm• 24 VAC• 1.8K Thermistor for TAC Vista• 10K Type 2 Thermistor for I/NET• 10K Type 3 Thermistor for Continuum™

• Display Option (-D)

SCD100 SCD100 SCD100

9

Wet Media Pressure Sensors

Description

TAC Vista

I/NET

Continuum

Differential Pressure Transducer - Wet Media

• 12-30 VDC / 24 VAC Supply Voltage• Field Selectable 4-20mA, 0-5/0-10V Output• Pushbutton and Remote Zero Adjustment• 4 Field Selectable Ranges: 0-5/10/25/50 psid• 4 Field Selectable Ranges: 0-10/20/50/100 psid• 4 Field Selectable Ranges: 0-25/50/125/250 psid• Optional LCD Display (-LCD)

EPW103EPW104EPW105

EPW103EPW104EPW105

EPW103EPW104EPW105

Differential Pressure Transducer - Wet Media - 2 Wire

• 12-24 VDC Supply Voltage• Output 4 - 20mA• Pushbutton and Remote Zero Adjustment• 2-Wire Version• 4 Field Selectable Ranges: 0-5/10/25/50 psid• 4 Field Selectable Ranges: 0-10/20/50/100 psid• 4 Field Selectable Ranges: 0-25/50/125/250 psid• Optional LCD Display (-LCD)

EPW2103EPW2104EPW2105



Gauge Pressure Sensors

Description

TAC Vista I/NET Continuum

Gauge Pressure Sensor

• 8-28 VDC Supply Voltage• 2-Wire 4-20 mA Output (-AM)• 3-Wire 0-5 VDC Output (-AJ)• 3-Wire 0-10 VDC Output (-AV)• 0-15 psig Pressure Range• 0-25 psig Pressure Range• 0-50 psig Pressure Range• 0-75 psig Pressure Range• 0-100 psig Pressure Range• 0-250 psig Pressure Range• 0-500 psig Pressure Range• 0-1000 psig Pressure Range• Optional 4-20 mA Powered LCD (-AA04)

EPG103EPG104EPG105EPG106EPG107EPG108EPG109EPG110



Notes

www.tac.com [email protected]

Copyright © 2006, TACAll brand names, trademarks and registered trademarks are the property of their respective owners. Information contained within this document is subject to change without notice. All rights reserved. BR-SENSOR-US03/06

Documents

Sensor - #1 Source For Building Automation, HVAC, …midwestbas.com/store/media/pdf/tac/SENSOR_PRODUCT_LINE... · 2008-05-16 · --- --- TT-D Immersion Temperature Sensors Description