Upload
others
View
11
Download
0
Embed Size (px)
Citation preview
Series 70 ePODs: Type-PStatic Transfer Switch with Distribution
Technical Specifications
2
© 2010 LayerZero Power Systems, Inc. Series 70 ePODs: Type-P Technical Specifications
Basic Purpose The Series 70 ePODs: Type-P provides switching between
two independent power sources on the primary side of the
transformer, while providing power distribution capabilities,
featuring a solid-state transfer switch on the primary side of the
transformer. The Series 70 ePODs: Type-P provides the ability
to transfer power between two or three sources in quarter of an
electrical cycle, while delivering that power to up to twelve sub-
feed circuit breakers.
This automatically or manually provides static transfers between
two AC sources in less than a quarter cycle, and safely transfers
this power downstream. The Series 70 ePODs: Type-P performs
open-transition transfer in such a manner that the connected load
disruption is minimized without ever cross-connecting the power
sources. A power source is specified as the preferred source, and
if the preferred source fails, the unit will automatically connect to
the alternative source until the preferred source is available again.
Power sources are not required to be synchronized with
our patented dynamic phase compensation technique. All
components of the machine are safely replaceable without the
need to de-energize the load.
Series 70 ePODs: Type-P
3
© 2010 LayerZero Power Systems, Inc. Series 70 ePODs: Type-P Technical Specifications
The Series 70 ePODs: Type-P is ETL listed to UL 1008AND to UL 60950
eSTS:Size: 250A, 400A, 600A, 800AVoltage: 480V, 3-W, 600V, 3-WRedundancy: Triple Modular Redundant (TMR)Single Module Redundant (SMR)Output Switch: Redundant, Non-redundant
Transformer section: Size: 150kVA; 225kVA; 300kVA; 400kVA; 500kVAType: Normal Efficiency, TP-1 high efficiencyInrush: Low-inrushNon-linear thermal rating: K-9, K-13, K-20
Main Circuit Breaker Section: MCB optionalMounting: Fixed, Plug-InType: Molded Case Switch65kA, 100kAElectronic Trip 65kAIC, 100kAICAccessories: CB Shunt-trip120VAC, 24VDCCB Position Indication: Open, Tripped, Closed
Distribution Section: Sub-feed distribution1200A SafePanel800A I-Line PanelUp to six (6) 42-circuit, 225A or 400A panel boards
Agency Certification
Reliability
• Triple modular redundancy• Serialized circuit boards• Fail-safe mechanics• Waveform capture• “Black box” forensic diagnostics• Voice guided bypass• Insulated, epoxy coated buswork• Silver plated terminals• Brazed invisible joints• Machined cap screws & disc springs• Helicoil & PEM inserts• Staggered heat sink arrangement• Fanless operation• Optical fiber based controls• Isolated input interface
Safety
• InSight IR portholes• Front-only access• Dead-front hinged doors• Clear Translucent Polycarbonate
window to view LEDs• NFPA 70E friendly
Connectivity
• Ethernet• Modbus/TCP• NTP time clock synchronization
Information Centricity
• Access to eBOSS portal• Project tracking• Incident logging• Access to test reports &
documentation• Touch screen interface
Series 70 ePODs: Type-P
4
© 2010 LayerZero Power Systems, Inc. Series 70 ePODs: Type-P Technical Specifications
Seamless Integration With Existing Systems
Far too often coordination with existing systems are afterthoughts. As a result, many data centers resort to makeshift solutions that
are inefficient and lacking in harmonization with existing monitoring software. LayerZero offers a wide choice of product options, all
Opportunity to Enhance Operator Safety
Our Series 70 product line was developed to provide a safe environment for the operator; and to assist critical sites with staying in compliance with the stringent safety requirements of NFPA 70E.
Lack of True System Redundancy
All of our equipment is truly redundant, so that if individual components were to fail the systems will remain fully operational. LayerZero equipment does not contain any single points of failure.
Need for Open Connectivity and Monitoring
Coordinating information is difficult when clusters of connected equipment are based on proprietary protocols, and LayerZero solves this by basing the equipment off of open technologies.
Lack of Comprehensive Diagnostics Tools
To prevent future problems in facilities our systems provide easy to read alarms with clear indications on the sources of offending conditions, so that root-cause analysis can be performed.
Power distribution issues in the data center industry include:
designed to coordinate with your existing
power infrastructure. Our products
fully support open protocols, so that the
information generated from LayerZero
equipment seamlessly fits in to existing
monitoring packages. LayerZero supports
open connectivity utilizing open protocols.
Series 70 ePODs: Type-P
5
© 2010 LayerZero Power Systems, Inc. Series 70 ePODs: Type-P Technical Specifications
Triple Modular Redundancy
The Series 70 ePODs: Type-P occupies a unique architectural location in mission critical infrastructure systems, in that their tolerance for failure is virtually zero.
The units are available in SMR (Single Modular Redundancy) or TMR (Triple Modular Redundancy) configurations, both of which are architectures that eliminate single points of failure.
The TMR configuration will continue its mission of being a static transfer switch even if any one control element were to fail. As such, it is known to improve reliability by an order of magnitude.
Triple Modular Redundant products serve the needs of elite, mission-critical infrastructure requirements. With our Triple Modular Redundant STS topology we can provide products that are at least ten times more reliable than alternative solutions.
Serialized circuit boards
We serialize and track all critical circuit boards and memory cards through our eBOSS portal, which allows customers to reference which components their machines are made from, who tested the components, as well as the ability to view notes generated from testing. Serialized components offer the ability to drill-down on prospective component failure utilizing predictive modeling techniques, so if part fails, the instance can be cross-referenced with similar parts. This preventative maintenance helps ensure maximum uptime.
Fail-safe mechanics
The bypass procedure employs a fail-safe measure to improve system reliability in that the procedure can only be physically completed in the correct sequence.
A mechanical “double goalpost” interlock bar constrains the operators behavior so that breakers can only be manipulated in an order maintain continuity of power to the load.
The restraint rotates downward for manual transfer testing purposes.
Waveform capture
Each transfer event and overload transfer-inhibit event is captured and stored in non-volatile memory. The Waveform Capture tool is standard in all eSTS products. It provides 3-phase current and 3-phase voltage waveform analysis of Source 1, Source 2, (Source 3 in a 3-source system) and Output
Precise voltage and current data is necessary to understand why a transfer was made. Detailed records of transfers help operators better understand the root cause of events, helping engineers properly eradicate problems. Without waveform capture, this is not possible in a live environment.
The 6-cycle capture is displayed on the control panel or can be viewed remotely on a standard web-browser.
Reliability
6
© 2010 LayerZero Power Systems, Inc. Series 70 ePODs: Type-P Technical Specifications
“Black box” forensic diagnostics
The black box capabilities of LayerZero equipment are extremely useful for analyzing root cause analysis, enabling operators to pinpoint exactly where a fault occurred. “Black box” forensics provide successive event information with ten microsecond resolution, supplies a brief snapshot of the event with a lead-in for further inquiry, and furnishes a real-time status indicator of all machine parameters at the time of the event.
The technology in our “black box” event history is one of the most useful recording schemes in the mission critical power machine industry.
Voice guided bypass
To help prevent operators from completing the bypass procedure out-of-sequence, our products feature a voice prompted bypass procedure. This instructs the operator in a step-by-step course of action of the process, with only one operation per screen. Voice guided bypass slows down operators and compels them to think about the process, significantly reducing the probability of operator error.
Visual and audio cues provide clear instructions on the bypassing sequence.
Epoxy coated buswork
Our usage of epoxy coated buswork helps ensure safety, protecting operators from being exposed to live parts.
Silver plated terminals
LayerZero utilizes silver plating on all of its machine components to be able to provide the highest performance. Silver has high conductivity and low resistance - which makes for a great contact.
Brazed invisible joints
Electrical copper bus joints that cannot be accessed by the operator for thermal scanning and maintenance are brazed. This creates a maintenance-free joint.
LayerZero systems are durable, sturdy, and built to last.
Machined cap screws & disc springs
Our systems utilize machined cap screws and engineered disc springs with a flat pressure vs deflection profile to ensure that all bolted connections maintain constant torque through the life of the product.
Reliability
7
© 2010 LayerZero Power Systems, Inc. Series 70 ePODs: Type-P Technical Specifications
LayerZero Certified Field Service Engineers are responsible for
supporting installations, PMs, equipment upgrades, technical
support, documentation management, and training. Located
nationwide and available 24/7, our certified field service
engineers are well-trained to keep your equipment reliable.
About LayerZero Field Service Engineers
Optical fiber controls
Fiber optic based controls eliminate noise and interference, while isolating components from high voltage. Optical fiber allows service to be reliably connected, while protecting the equipment.
Staggered heat sink
The heat sink arrangement is staggered between sources and phases to minimize the creation of extreme thermal gradients between heat sink columns when conducting on one source or the other.
Fanless operation
Fans and fan sensors are one of the most common components to fail.
For maximum uptime, Type-P systems do not contain any fans, filters, or fan fuses.
Helicoil insertsPEM inserts
Reliability
8
© 2010 LayerZero Power Systems, Inc. Series 70 ePODs: Type-P Technical Specifications
InSight IR Portholes
Strategically positioned IR-scan portholes to enable safe thermal scanning of all bolted connections
with the deadfront closed, without exposing the operator to power circuit voltage.
The IR window swivels upward and unlocks with key-hole access to revel an arc-proof mesh, allowing
the operator to point-and-shoot thermal cameras to obtain accurate readings.
LayerZero provides extensive documentation and training for proper thermal scanning procedures.
Sectionalized Components
Normal operator sections (breakers/switches) are physically separated from the power electronics and
control electronics sections, so that maintenance on a section can be safely performed.
If maintenance is required on a particular section, power can be bypassed to another section to allow
for safe repairs to be made. All connections are optically isolated to minimize risk.
Insulated Parts
Operators are well-protected from exposed connections.
Energized parts are all insulated, covered, recessed, &/or internally mounted for safer operation of the
unit.
In addition, sections that isolate machine components are insulated.
Polycarbonate window to view diagnostic LEDs
Operators can view the status of diagnostic LEDs without direct exposure to the energized power
electronics section.
NFPA 70E
Our Series 70 product line was developed to exceed NFPA-70E regarding operator safety, to help data
centers drastically reduce the risks of their energy distribution systems.
Safety
9
© 2010 LayerZero Power Systems, Inc. Series 70 ePODs: Type-P Technical Specifications
SafePanel distribution
The Series 70 ePODs: Type-P features an IP-20, finger-safe panel board, meaning that the opening will not allow ingress of ½” (12.5mm) diameter probe, for maximum operator safety.
An arc can form as two live conductors are separated – such as the removal of a circuit breaker from a panel board. The SafePanel design ensures that a potential arc would be contained in the connection well so that even if a branch breaker were to be removed, the arc would be contained in the connection well.
The CB can only be disengaged/removed when in the off position, which eliminates the possibility of the creation of an arc or flash during breaker removal. When the CB is in the off position, access to the mounting screw is locked out. When the CB is in the on positions, access to the mounting screw is enabled via a sliding shutter.
Insulated with the components deeply isolated, removal of the breaker is safe and easy.
There is a convenience handle on the load side and a removable handle on the line side. The subfeed circuit breaker is installed by placing the CB into the panel board and engaging the lock with a screw.
Safety
10
© 2010 LayerZero Power Systems, Inc. Series 70 ePODs: Type-P Technical Specifications
Open protocols
LayerZero utilizes open source protocols for its communications, which allows for:
- An enhanced ability to customize software- Flexible software development options - Lower total cost of ownership (no per copy fees)- Elimination of vendor lock-in- No proprietary limitations - Provides a stable, well developed foundation
The control path for the communications system gathers information from all aspects of the machine, isolated by fiber optics.
Connectivity to a WAN allows for the information to be accessible from any location, offering a variety of monitoring options.
Series 70 ePODs: Type P
- Summary Alarm- On Source 1- On Source 2- Source 1 Available- Source 2 Available
Dry ContactsStandard Ethernet
Modbus/TCP http:// through a standard web browser
Network Time Protocol (NTP) Compliant
- Meters- Alarms - Waveforms- History/Event Log- Diagnostics
- Meters- Alarms
A variety of connectivity options provide operators with the ability to adapt LayerZero systems to fit existing networks without the complications of working with closed, proprietary systems.
The Series 70 ePODs: Type-P is designed to make it easy to transfer and exchange power usage data, which is very useful towards making smart corporate decisions and policies.
A Flexible Approach
Connectivity
11
© 2010 LayerZero Power Systems, Inc. Series 70 ePODs: Type-P Technical Specifications
Touch screen interface
The Dynamic Mimic Panel is presented on a 15” color touch screen Graphical User Interface, which was carefully designed to be user-friendly, intuitive, and consistent.
A well creative and well organized “page” based navigation helps operators quickly get to the information they need, without having to search around.
The GUI is “Read-Only” unless a user has logged on. A walk-up user may examine the state of the switch, but can not change that state. This is “USER” level access. If a user has logged on by providing a valid password, then he or she is allowed to view additional pages (Page-Level Security) and to make changes to controls on pages (In-Page Security).
Access expires in 10 minutes. The 10 minute period is renewed if any Page navigation (ROOT or PAGE) button is selected.
Operators have instant access to real-time power usage information, which is valuable for making power-related decisions.
A mimic panel graphically show that current state of the switch and power flow, while health meters provide operators with the capability to know the status of a TMR instantly.
Alarms are visible on every screen. Alarms clear themselves when the offending condition is fixed. Until such time, Alarms persist. There is no “alarm clearing” button/capability. In a TMR system, when an alarm is posted by only one SCB the system continues to operate as a fully functional STS. Such an alarm points to a problem in only one of the three independent control systems.
Each transfer event and overload transfer-inhibit event is captured and stored as part of the history of the machine. The transfer history can only be cleared by authenticated users.
Information Centricity
12
© 2010 LayerZero Power Systems, Inc. Series 70 ePODs: Type-P Technical Specifications
Options
Specification Tables
The Series 70 ePODs: Type-P line offers the following configurations:
Current Voltage Heat Dissipation Weight Dimensions
250A 480V, 3-wire, 60Hz600V, 3-wire, 60Hz
4,750 BTU/Hr 1,350 lbs 48”W x 36”D x 80”H
400A 7,000 BTU/Hr 1,400 lbs 48”W x 36”D x 80”H
600A 9,500 BTU/Hr 1,500 lbs 48”W x 36”D x 80”H
800A 12,500 BTU/Hr 1,950 lbs 58”W x 36”D x 80”H
Available Withstand Ratings (kA) 480V 600V
18kA X
25kA X X
35kA X X
65kA X X
100kA X X
150kA X
200kA
Typical
Contact LayerZero for custom sizes and designs.
System size (kVA) eSTS ratings Output Voltage Dimensions (Front/Right side access)
480V, 3-wire 600V, 3-wire 120Y/208V, 3-phase, 4-wire + Ground240Y/415V, 3-phase, 4-wire + Ground
480V eSTS 600V eSTS
150kVA 250A 150A or 250A 96"W x 84"H x 36"D 96"W x 84"H x 36"D
225kVA 400A 250A or 400A 96"W x 84"H x 36"D 96"W x 84"H x 36"D
300kVA 400A or 600A 400A 96"W x 84"H x 36"D 96"W x 84"H x 36"D
400kVA 600A 400A or 600A 108"W x 84"H x 36"D 108"W x 84"H x 36"D
500kVA 800A 600A 168"W x 84"H x 48"D 158"W x 84"H x 48"D
Notes:1) Depth dimensions are valid for Sub-feed distribution. For panel board distribution, depth is 48".2) Add 12" to width and Left side access for (5) or (6) 42-circuit panel boards3) Rear access not required for installation; operation; and maintenance
• Number of Wires • Number of Poles • Frequency • Withstand
• Current • Voltage• Number of Sources • Number of Output CBs• Redundancy
This document is subject to change without notice. Rev: 3/3/10
Product Options
13
© 2010 LayerZero Power Systems, Inc. Series 70 ePODs: Type-P Technical Specifications
8
AB
76
5
C
8
D
67
5
43
21
AB
42
3
C
1
D
FSC
M N
O.
AP
VD
CH
K
DW
N
DA
TE
DA
TE
DA
TE
FIRS
T AN
GLE
PRO
J.
D SC
ALE
SIZ
ED
WG
NO
.
SH
EE
T
RE
V
EC
NR
EV
RE
VIS
ION
S
DE
SC
RIP
TIO
NA
PP
RO
VE
DD
ATE
UNLE
SS O
THER
WIS
E SP
ECIF
IED
DIM
ENSI
ONS
ARE
IN IN
CHES
DO N
OT S
CALE
DRA
WIN
G
TOLE
RANC
ES:
.XX
±.X
XX±
ANG
ULAR
±
Cop
yrig
ht©
200
3, L
ayer
Zero
Pow
er S
yste
ms,
Inc.
Not
es:
1. F
ront
acc
ess
only
requ
ired
for o
pera
tion
and
serv
icin
g of
Ser
ies
70 e
STS
and
Tran
sfor
mer
. Si
de
acce
ss o
nly
requ
ired
for s
ervi
cing
of S
ub-F
eed
Circ
uit B
reak
ers
and
asso
ciat
ed N
eutr
al a
nd G
roun
d.To
p or
Bot
tom
Acc
ess
is a
vaila
ble
for t
he S
erie
s 70
eST
S an
d fo
rth
e Su
b-Fe
ed C
ircui
t Bre
aker
Cab
inet
.
2. S
heet
s 2
thro
ugh
4 w
ill s
how
the
asse
mbl
y in
var
ious
form
s w
ithth
e �o
or s
tqnd
ass
embl
y no
t sho
wn
in a
ny v
iew
s.
3. A
sep
arat
e ou
tline
of t
he �
oor s
tand
s is
sho
wn
on S
heet
5 fo
rin
stal
latio
n la
yout
pur
pose
s.
4. F
or th
e eP
OD
s th
e un
it is
inte
rcon
nect
ed b
etw
een
the
Serie
s 70
eSTS
/ Tr
ansf
orm
er C
abin
et a
nd
bolt-
on S
ub-F
eed
Dis
trib
utio
nCa
bine
t. S
heet
3 w
ill h
ave
a de
scrip
tion
of m
ain
com
pone
nts.
5. F
ork
Lift
pro
visi
on fr
om e
ither
the
fron
t or s
ide
of th
e as
sem
bly
is a
vaila
ble
as s
how
n. P
rovi
sion
for l
iftin
g w
ith a
cra
ne is
sup
plie
dat
the
top
of th
e ca
bine
t and
is re
mov
able
if a
dditi
onal
cle
aran
ceis
nec
essa
ry.
6. F
or th
e Su
b-Fe
ed D
istr
ibut
ion
with
Sub
-Fee
d Ci
rcui
t Bre
aker
Ratin
gs o
f 225
A u
nit i
s su
pplied
with
de�
nitio
n sh
owin
g rig
ht s
ide
orie
ntat
ion.
See
Sht
2 fo
r Cab
le A
cces
s A
reas
and
reco
mm
ende
dw
ire s
ize
(Tab
le 1
). Se
e Sh
t 4 fo
r Cab
le L
andi
ng L
ocat
ions
.
7. T
he O
utpu
t con
nect
ion
from
the
2 So
urce
Ser
ies
70 e
STS
to th
eTr
ansf
orm
er a
nd th
e O
utpu
t con
nect
ion
from
the
Tran
sfor
mer
toth
e Su
b-Fe
ed D
istr
ibut
ion
Cabi
net w
ill b
e fa
ctor
y in
stal
led
inte
rnal
ly.
8. T
here
is n
o sh
ippi
ng s
plit
fro
m th
e fa
ctor
y to
the
end
user
.
NO
TE: 4
inch
min
imum
rear
cle
aran
ce re
quire
d fo
r pro
per i
nlet
suct
ion
to th
e tr
ansf
orm
er.
250A
Ser
ies
70 e
STS
Are
a
150K
VA T
rans
form
er
Are
a
Sub-
Feed
Circ
uit
Brea
ker /
NEU
& G
ND
Dis
trib
utio
n Ca
bine
t
Floo
r Sta
nd(S
ee N
otes
2 &
3)
.03 .0
10.1
/2
OU
TLIN
E, M
OU
NTI
NG
, IN
STA
LLA
TIO
N D
IAG
RAM
250A
, 480
V, 6
0Hz,
SM
R/TM
R, 2
Sou
rce
Serie
s 70
eST
S/15
0KVA
Tra
nsfo
rmer
/ Sup
plie
d w
ith (4
) 225
A S
QU
ARE
D I-
Line
Sub-
Feed
Dis
trib
utio
n Br
eake
rs /
Type
P e
POD
s
55-1
1-40
1493
TDA
ASP
J
AJP
SPJ
05/1
4/09
05/1
4/09
05/1
4/09
5 FO 14 = 1
94M
D40
1493
TDA
SHT1
Series 70 ePODs: Type-P Drawings
14
© 2010 LayerZero Power Systems, Inc. Series 70 ePODs: Type-P Technical Specifications
8
AB
76
5
C
8
D
67
5
43
21
AB
42
3
C
1
D
FSC
M N
O.
AP
VD
CH
K
DW
N
DA
TE
DA
TE
DA
TE
FIRS
T AN
GLE
PRO
J.
D SC
ALE
SIZ
ED
WG
NO
.
SH
EE
T
RE
V
EC
NR
EV
RE
VIS
ION
S
DE
SC
RIP
TIO
NA
PP
RO
VE
DD
ATE
UNLE
SS O
THER
WIS
E SP
ECIF
IED
DIM
ENSI
ONS
ARE
IN IN
CHES
DO N
OT S
CALE
DRA
WIN
G
TOLE
RANC
ES:
.XX
±.X
XX±
ANG
ULAR
±
Cop
yrig
ht©
200
3, L
ayer
Zero
Pow
er S
yste
ms,
Inc.
TAB
LE 1
DE
SC
RIP
TIO
NC
AB
LE S
IZE
AN
D L
UG
SIN
PU
T/C
OM
PR
ES
SIO
N L
UG
OU
TPU
T(7
5 D
EG
C W
IRE
MIN
)S
OU
RC
E IN
PU
T
(Ser
ies
70 e
STS
)
(2) 1
/2DI
A X
1-3
/4
MC
M003A052
C-C
SPA
CING
RO
NE
MA
STA
NDA
RD0/4# )2(
LA
NDIN
GS
GN
D /
NE
U B
US
ILSC
O S
ING
LE
(12)
#1/
0 TH
RU
350
KC
MBA
RREL
L TY
PE
EA
FO
R G
ND
AN
D N
EU
MEC
HANI
CAL
LUG
FA
CTO
RY P
ROV
IDED
SU
B-F
EE
D
C
IRC
UIT
BR
EA
KE
RS
SI
NGLE
/ DU
AL
CB
621
THR
U C
B62
430
0MC
MBA
RREL
L TY
PER
OA522
MEC
HANI
CAL
LUG
0/4# )2(
FACT
ORY
PRO
VID
ED
CO
NTR
OL
WIR
E#1
6GA
SERI
ES 7
0 ES
TSSU
CTIO
N IN
LET
144
SQ IN
TO
TAL
SUB-
FEED
UN
ITCB
621
THRU
CB6
24(4
80#)
CLEA
RAN
CES:
FRO
NT:
36I
NRE
AR:
4IN
LEFT
SID
E: 0
INRI
GH
T SI
DE:
36I
NTO
P: 1
8IN
GU
I
SERI
ES70
eST
S /
150k
VA X
FMR
ARE
A(3
800#
)
TRA
NSF
ORM
ERSU
CTIO
N IN
LET
340
SQ IN
TO
TAL
(FRO
NT/
BACK
)
84
36
89
8
84
FORK
LIFT
PRO
VISI
ON
(SID
E EN
TRY)
58
1028
10
475 82
98
FORK
LIFT
PRO
VISI
ON
(FRO
NT
ENTR
Y)
CEN
TERL
INE
TOP
LIFT
ING
PRO
VISI
ON
3
2
31.
5
3
81
FRO
NT
VIEW
RIG
HT
SID
E VI
EW
TOP
VIEW
2619
.25
869.
25
2
32.8
8
7
22.2
5
TOP
CABL
E A
CCES
SA
REA
FO
R SU
B-FE
EDPH
ASE
/ G
ND
/ N
EUO
UTP
UT
TOP
CABL
E A
CCES
SA
REA
FO
R eS
TSIN
PUT
34.8
1
SERI
ES 7
0 eS
TSA
IR E
XHA
UST
OU
TLET
TRA
NSF
ORM
ERA
IR E
XHA
UST
OU
TLET
.03 .0
10.1
/2
OU
TLIN
E, M
OU
NTI
NG
, IN
STA
LLA
TIO
N D
IAG
RAM
250A
, 480
V, 6
0Hz,
SM
R/TM
R, 2
Sou
rce
Serie
s 70
eST
S/15
0KVA
Tra
nsfo
rmer
/ Sup
plie
d w
ith (4
) 225
A S
QU
ARE
D I-
Line
Sub-
Feed
Dis
trib
utio
n Br
eake
rs /
Type
P e
POD
s
55-1
1-40
1493
TDA
ASP
J
AJP
SPJ
05/1
4/09
05/1
4/09
05/1
4/09
5 FO 24 = 1
94M
D40
1493
TDA
SHT2
Series 70 ePODs: Type-P Drawings
15
© 2010 LayerZero Power Systems, Inc. Series 70 ePODs: Type-P Technical Specifications
8
AB
76
5
C
8
D
67
5
43
21
AB
42
3
C
1
D
FSC
M N
O.
AP
VD
CH
K
DW
N
DA
TE
DA
TE
DA
TE
FIRS
T AN
GLE
PRO
J.
D SC
ALE
SIZ
ED
WG
NO
.
SH
EE
T
RE
V
EC
NR
EV
RE
VIS
ION
S
DE
SC
RIP
TIO
NA
PP
RO
VE
DD
ATE
UNLE
SS O
THER
WIS
E SP
ECIF
IED
DIM
ENSI
ONS
ARE
IN IN
CHES
DO N
OT S
CALE
DRA
WIN
G
TOLE
RANC
ES:
.XX
±.X
XX±
ANG
ULAR
±
Cop
yrig
ht©
200
3, L
ayer
Zero
Pow
er S
yste
ms,
Inc.
TRA
NSF
ORM
EREX
HA
UST
ARE
A36
0 SQ
IN
SERI
ES 7
0 eS
TSEX
HA
UST
ARE
A24
0 SQ
IN
SUB-
FEED
DIS
TRIB
UTI
ON
CA
BIN
ET(C
B621
- CB6
24)
GRO
UN
D B
US
ASS
EMBL
Y
NEU
TRA
L BU
SA
SSEM
BLYSU
B-FE
EDCI
RCU
IT B
REA
KER
BAN
K (8
CB
MA
X)(D
ISTR
IBU
TIO
N P
AN
ELN
OT
SHO
WN
FO
R CL
ARI
TY)
TRA
NSF
ORM
ER T
APS
T620
CON
TRO
LS
SECT
ION
(CIB
/RO
UTE
R) SOU
RCE
INPU
T/XF
MR
OU
TPU
T
.03 .0
10.1
/2
OU
TLIN
E, M
OU
NTI
NG
, IN
STA
LLA
TIO
N D
IAG
RAM
250A
, 480
V, 6
0Hz,
SM
R/TM
R, 2
Sou
rce
Serie
s 70
eST
S/15
0KVA
Tra
nsfo
rmer
/ Sup
plie
d w
ith (4
) 225
A S
QU
ARE
D I-
Line
Sub-
Feed
Dis
trib
utio
n Br
eake
rs /
Type
P e
POD
s
55-1
1-40
1493
TDA
ASP
J
AJP
SPJ
05/1
4/09
05/1
4/09
05/1
4/09
5 FO 34 = 1
94M
D40
1493
TDA
SHT3
Series 70 ePODs: Type-P Drawings
16
© 2010 LayerZero Power Systems, Inc. Series 70 ePODs: Type-P Technical Specifications
8
AB
76
5
C
8
D
67
5
43
21
AB
42
3
C
1
D
FSC
M N
O.
AP
VD
CH
K
DW
N
DA
TE
DA
TE
DA
TE
FIRS
T AN
GLE
PRO
J.
D SC
ALE
SIZ
ED
WG
NO
.
SH
EE
T
RE
V
EC
NR
EV
RE
VIS
ION
S
DE
SC
RIP
TIO
NA
PP
RO
VE
DD
ATE
UNLE
SS O
THER
WIS
E SP
ECIF
IED
DIM
ENSI
ONS
ARE
IN IN
CHES
DO N
OT S
CALE
DRA
WIN
G
TOLE
RANC
ES:
.XX
±.X
XX±
ANG
ULAR
±
Cop
yrig
ht©
200
3, L
ayer
Zero
Pow
er S
yste
ms,
Inc.
1.25
BET
WEE
NPH
ASE
CL
1.00
0 BE
TWEE
NLU
G C
L(1
0 EA
GN
D/N
EU)
RIG
HT
SID
E VI
EW(I-
LIN
E O
NLY
)
GN
D /
NEU
VERT
CL
AB
CPH
ASE
SOU
RCE
2
FRO
NT
VIEW
TOP
VIEW
AB
CPH
ASE
SOU
RCE
1
28
34
1.83
1TY
PBE
TWEE
N P
HA
SES
811
13
INPU
TPH
ASE
LAN
DIN
G
15
69
INPU
TPH
ASE
LAN
DIN
G(T
OP)
INPU
TPH
ASE
LAN
DIN
G(B
OTT
OM
)
30
INPU
TG
ROU
ND
LAN
DIN
G
40IN
PUT
GRO
UN
D
3IN
PUT
GRO
UN
D
OU
TPU
T G
ND
/ N
EU C
L
SUB-
FEED
CB
LAN
DIN
G
OU
TPU
T G
ND
BUS
ARE
A
NEU
BU
SA
REA
SUB-
FEED
LAN
DIN
G C
L
58
98 R
EF
PH A
PH B
PH C
CB62
1PH
A
PH B
PH C
CB62
2
PH A
PH B
PH C
PH A
PH B
PH C
CB62
4
PH A
PH B
PH C
CB62
3
.03 .0
10.1
/2
OU
TLIN
E, M
OU
NTI
NG
, IN
STA
LLA
TIO
N D
IAG
RAM
250A
, 480
V, 6
0Hz,
SM
R/TM
R, 2
Sou
rce
Serie
s 70
eST
S/15
0KVA
Tra
nsfo
rmer
/ Sup
plie
d w
ith (4
) 225
A S
QU
ARE
D I-
Line
Sub-
Feed
Dis
trib
utio
n Br
eake
rs /
Type
P e
POD
s
55-1
1-40
1493
TDA
ASP
J
AJP
SPJ
05/1
4/09
05/1
4/09
05/1
4/09
5 FO 44 = 1
94M
D40
1493
TDA
SHT4
5
20
2144
17 1733
.037
21
CIRC
UIT
BRE
AKE
R(C
B621
-CB6
24)
CABL
ING
ARE
A(A
DD
ITIO
NA
L O
UTP
UT
ARE
A A
VAIL
ABL
E)
Series 70 ePODs: Type-P Drawings
17
© 2010 LayerZero Power Systems, Inc. Series 70 ePODs: Type-P Technical Specifications
8
AB
76
5
C
8
D
67
5
43
21
AB
42
3
C
1
D
FSC
M N
O.
AP
VD
CH
K
DW
N
DA
TE
DA
TE
DA
TE
FIRS
T AN
GLE
PRO
J.
D SC
ALE
SIZ
ED
WG
NO
.
SH
EE
T
RE
V
EC
NR
EV
RE
VIS
ION
S
DE
SC
RIP
TIO
NA
PP
RO
VE
DD
ATE
UNLE
SS O
THER
WIS
E SP
ECIF
IED
DIM
ENSI
ONS
ARE
IN IN
CHES
DO N
OT S
CALE
DRA
WIN
G
TOLE
RANC
ES:
.XX
±.X
XX±
ANG
ULAR
±
Cop
yrig
ht©
200
3, L
ayer
Zero
Pow
er S
yste
ms,
Inc.
ACC
ESS
ARE
ASO
URC
E IN
PUT
ACC
ESS
ARE
ATR
AN
SFO
RMER
(NO
T U
SED
)
NO
TE: H
EIG
HT
VARI
ABL
EFR
OM
NO
MIN
AL
u0.7
5
25.0
06.
00
7.50
22.0
0
37.7
519
.50
5.50
6.50
36.0
0
1.32
38.6
5
34.5
02.
00 81.0
0
83.0
0
18.0
0
36.0
0
1.32
31.
323
1.43
.03 .0
10.1
/2
OU
TLIN
E, M
OU
NTI
NG
, IN
STA
LLA
TIO
N D
IAG
RAM
250A
, 480
V, 6
0Hz,
SM
R/TM
R, 2
Sou
rce
Serie
s 70
eST
S/15
0KVA
Tra
nsfo
rmer
/ Sup
plie
d w
ith (4
) 225
A S
QU
ARE
D I-
Line
Sub-
Feed
Dis
trib
utio
n Br
eake
rs /
Type
P e
POD
s
55-1
1-40
1493
TDA
ASP
J
AJP
SPJ
05/1
4/09
05/1
4/09
05/1
4/09
5 FO 54 = 1
94M
D40
1493
TDA
SHT5
Series 70 ePODs: Type-P Drawings