Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
VURSA kd SERIES SHOWER STALL
Rough-In Dimensions
Finished Dimensions
Unit Features
Special Notes
48” wide x 33-1/4” deep x 76-1/2” high (with 4-inch dam)
48” wide x 32” deep x 75-1/4” high (with 4-inch dam)
l Three - Piece Fiberglass Composite Constructionl Sanitary Grade Polyester Gelcoat Surfacel Front-Side Installation With Minimal Sealant Requirements l 3-3/8” Dia. Center Drainl Anti-Drip Front Dam Ledgel Twin Corner Accessory Ledgesl Generous, Upper Back Wall Shelvingl Wall Design Accommodates Grab Bar Applicationsl Textured Floor Patternl 1/2-inch Balsa Wood Core Floor Structure
l Optional ABF Model (provides 3-inches of drain clearance)l ‘QwikClic’ Technology (Patents Pending)l Factory Applied Reinforcement Packages Available (see following pages)l Factory Applied Bar Packages Available (see following pages)
MULTI-PIECE MODEL
SH3P-4832 BP2 R
SH3P-4832 (3-piece)
151
®
TypicalControl
Area
TypicalControl
Area
71-1/4”
26-5/8”
1-1/4”
26-5/8”
Shelf
Seam
Seam
1-1/4”
16”w x 3”dShelves
AccessoryLedge
Seam
Seam
Shelf
48”
1-3/4”
1-1/4”
1-3/4” 44-1/2”
24” 24”
Drip Ledge
16”
32”
33-1/4”
16”3-3/8” Dia.
Drain
Shelves
Dam
Drain ClearanceD
C
B
A
F
Left Side WallRight Side Wall Back Wall
Seam
6” x 4”Accessory
LedgesAccessory
Ledge
Order No.: SH3P-4832 (4” dam) Order No.: SH3P-4832 ABF (6” dam)
48” x 32”, 3-piece gelcoated fiberglass shower with ‘QuikClic’, front side installation, 4” low profile dam (1” drain clearance) upper-level back wall shelves, twin corner accessory ledges and center drain.
Std Unit ABF UnitA 76-1/2” 78-1/2”B 75-1/4” 77-1/4”C 4” 6”D 1” 3”E - -F 22” 24”
SH3P-4832 ABF (illustrated)
Enclosure Size: 44-1/2”w (max) x 71-1/4”h (max)
VURSA kd SERIES SHOWER STALL®
152
Package Order No.: FH (Fair Housing wall reinforcement)
Package Includes: Factory applied, HUD-FHA compliant (Fair Housing), structurally reinforced wall areas (as shown) for independent field application of bars.
Package Order No.: 3SM (3-side, mid-level wall reinforcement)
Package Includes: Factory applied, 3-side, mid-level, structurally reinforced wall areas (as shown), exceeding ‘Fair Housing’ (HUD/FHA) requirements, for independent field application of bars.NOTE: Factory installed bar packages available using 3SM reinforcement.
®®
8” w x 20” hReinforcement
28” w x 26” hReinforcement
Cutout
26-5/8”
40”w x 26” hReinforcement
Cutout
26-5/8”
6”
VURSA kd (Multi-Piece) Series
Model: SH3P-4834RS(3/15/2010)
Dimension Tolerances+ 0 / -3/8-inch
®
VURSA kd (Multi-Piece) Series
Model: SH3P-4832 / 3SM(11/03/2011)
28” w x 16” hReinforcement
40”w x 16” hReinforcement
8” w x 20” hReinforcement
28” w x 26” hReinforcement
28” w x 16” hReinforcement
6”
Cutout Cutout
TypicalControl
Area
TypicalControl
Area
Left Side Wall1-1/4”
Back WallRight Side Wall1-1/4”
4” Dam(std model)
6” Dam(ABF model)
Shelf
AccessoryLedge
Shelf
Seam
Seam
Shelf
Seam
Seam
Shelf
AccessoryLedge
32” 1-1/4” 48”
AccessoryLedge
AccessoryLedge
Seam
38”
28” w x 10” hReinforcement
40” w x 10” hReinforcement
28” w x 10” hReinforcement
38”
36”
TypicalControl
Area
TypicalControl
Area
ControlArea
ControlArea
Left Side Wall1-1/4”
Back WallRight Side Wall1-1/4”
4” Dam(std model)
6” Dam(ABF model)
Shelf
AccessoryLedge
Shelf
Seam
Seam
Shelf
Seam
Seam
Shelf
AccessoryLedge
32” 1-1/4” 48”
AccessoryLedge
AccessoryLedge
Seam
ActivLifesolutions
ActivLifesolutions
153
40”w x 16” hReinforcement 28” w x 20” h
Reinforcement
28” w x 26” hReinforcement
Cutout
26-5/8”
6-1/2”
40”w x 26” hReinforcement
Cutout
26-5/8”
6”
VURSA kd (Multi-Piece) Series
Model: SH3P-4834RS(3/15/2010)
Dimension Tolerances+ 0 / -3/8-inch
®
VURSA kd (Multi-Piece) Series
Model: SH3P-4832 / 3SF(11/03/2011)
28” w x 16” hReinforcement
40”w x 16” hReinforcement
28” w x 20” hReinforcement
28” w x 26” hReinforcement
28” w x 16” hReinforcement
6”
Cutout Cutout
TypicalControl
Area
TypicalControl
Area
Left Side Wall1-1/4”
Back WallRight Side Wall1-1/4”
4” Dam(std model)
6” Dam(ABF model)
Shelf
AccessoryLedge
Shelf
Seam
Seam
Shelf
Seam
Seam
Shelf
AccessoryLedge
32” 1-1/4” 48”
AccessoryLedge
AccessoryLedge
Seam
Package Order No.: 3SF (3-side, full-wall reinforcement)
Package Includes: Factory applied, 3-side, full-wrap, structurally reinforced wall areas (as shown), exceeding ‘Fair Housing’ (HUD/FHA) requirements, for independent field application of bars.NOTE: Factory installed bar packages available using 3SF reinforcement.
Package Order No.: BP1-(R or L) (2-bar only package)Upgrade Package No.: BP1-(R or L) WHT (1-1/4” dia., white powder coat, 2-bar only package) BP1-(R or L) OFW (1-1/4” dia., off-white powder coat, 2-bar only package) BP1-(R or L) SNK (1-1/4” dia., satin nickel, 2-bar only package)
Package Includes: Factory installed, 1-1/2” dia. stainless steel, 2-bar package with basic reinforcement for components (as shown).NOTE: Enhanced reinforcement available, see 3SM & 3SF packages.NOTE: “R or L” designates RH or LH control wall (BP1-L illustrated).
TypicalControl
Area
32-3/4” (std model)34-3/4” (ABF model)
32-3/8” Bar 20” Bar
VURSA kd (Multi-Piece) Series
Model: SH3P-4832 ABF/ BP1-L(11/04/2011)
Dimension Tolerances+ 0 / -3/8-inch
®
6”
Left (Control) Wall1-1/4”
Back WallRight Side Wall1-1/4”
4” Dam(std model)
6” Dam(ABF model)
Shelf
AccessoryLedge
Shelf
Seam
Seam
Shelf
Seam
Seam
Shelf
AccessoryLedge
32” 1-1/4” 48”
AccessoryLedge
AccessoryLedge
Seam
ActivLifesolutions
ActivLifesolutions
®
154
TypicalControl
Area
TypicalControl
Area
20” Bar32-3/4” (std model)34-3/4” (ABF model)
32-3/8” Bar 20” Bar
VURSA kd (Multi-Piece) Series
Model: SH3P-4832 ABF/ BP3(11/07/2011)
Dimension Tolerances+ 0 / -3/8-inch
®
6”6”
Left Side Wall1-1/4”
Back WallRight Side Wall1-1/4”
4” Dam(std model)
6” Dam(ABF model)
Shelf
AccessoryLedge
Shelf
Seam
Seam
Shelf
Seam
Seam
Shelf
AccessoryLedge
32” 1-1/4” 48”
AccessoryLedge
AccessoryLedge
Seam
TypicalControl
Area
32-3/4” (std model)34-3/4” (ABF model)
32-3/8” Bar 20” Bar
VURSA kd (Multi-Piece) Series
Model: SH3P-4832 ABF/ BP2-L(11/04/2011)
Dimension Tolerances+ 0 / -3/8-inch
®
24” Bar
4”
6”24” Bar
Left (Control) Wall1-1/4”
Back WallRight Side Wall1-1/4”
4” Dam(std model)
6” Dam(ABF model)
Shelf
AccessoryLedge
Shelf
Seam
Seam
Shelf
Seam
Seam
Shelf
AccessoryLedge
32” 1-1/4” 48”
AccessoryLedge
AccessoryLedge
Seam
Package Order No.: BP2-(R or L) (3-bar only package)Upgrade Package No.: BP2-(R or L) WHT (1-1/4” dia., white powder coat, 3-bar only package) BP2-(R or L) OFW (1-1/4” dia., off-white powder coat, 3-bar only package) BP2-(R or L) SNK (1-1/4” dia., satin nickel, 3-bar only package))
Package Includes: Factory installed, 1-1/2” dia. stainless steel, 3-bar package with basic reinforcement for components (as shown).NOTE: Enhanced reinforcement available, see 3SM & 3SF packages.NOTE: “R or L” designates RH or LH control wall (BP2-L illustrated).
Package Order No.: BP3 (3-bar only package)Upgrade Package No.: BP3 WHT (1-1/4” dia., white powder coat, 3-bar only package) BP3 OFW (1-1/4” dia., off-white powder coat, 3-bar only package) BP3 SNK (1-1/4” dia., satin nickel, 3-bar only package)
Package Includes: Factory installed, 1-1/2” dia. stainless steel, 3-bar package with basic reinforcement for components (as shown).NOTE: Enhanced reinforcement available, see 3SM & 3SF packages.
®®
ActivLifesolutions
ActivLifesolutions
155
TypicalControl
Area
TypicalControl
Area
32-3/4”(std)
34-3/4”(ABF)
32-3/8” Bar 20” Bar6”
28-3/4”
Right Side Wall Left (Control) Wall
6”
1”
18-1/2”Seat
13-1/2”1-3/4”
5-1/4”
Right (Seat) Wall Left (Control) Wall
19”
1-1/4”Back Wall
1-1/4”
4” Dam(std model)
6” Dam(ABF model)
Shelf
AccessoryLedge
Shelf
Seam
Seam
Shelf
Seam
Seam
Shelf
AccessoryLedge
32” 1-1/4” 48”
AccessoryLedge
AccessoryLedge
Seam
TypicalControl
Area
TypicalControl
Area
32-3/4” (std model)34-3/4” (ABF model)
32-3/8” Bar
VURSA kd (Multi-Piece) Series
Model: SH3P-4832 ABF/ BP5(11/07/2011)
Dimension Tolerances+ 0 / -3/8-inch
®
Left Side Wall1-1/4”
Back WallRight Side Wall1-1/4”
4” Dam(std model)
6” Dam(ABF model)
Shelf
AccessoryLedge
Shelf
Seam
Seam
Shelf
Seam
Seam
Shelf
AccessoryLedge
32” 1-1/4” 48”
AccessoryLedge
AccessoryLedge
Seam
Package Order No.: BP5 (single-bar only package)Upgrade Package No.: BP5 WHT (1-1/4” dia., white powder coat, single-bar only package) BP5 OFW (1-1/4” dia., off-white powder coat, single-bar only package) BP5 SNK (1-1/4” dia., satin nickel, single-bar only package)
Package Includes: Factory installed, 1-1/2” dia. stainless steel, single, back wall bar package (as shown).NOTE: Enhanced reinforcement available, see 3SM & 3SF packages.
Package Order No.: TL-(RS or LS) (2-bar & folding seat package)Upgrade Package No.: TL-(RS or LS) WHT (1-1/4” dia., white powder coat, 2-bar & folding seat package) TL-(RS or LS) OFW (1-1/4” dia., off-white powder coat, 2-bar & folding seat package) TL-(RS or LS) SNK (1-1/4” dia., satin nickel, 2-bar & folding seat package)
Package Includes: Factory installed, 1-1/2” dia. stainless steel, 2-bar and folding seat package with basic reinforcement for components (as shown).NOTE: Enhanced reinforcement available, see 3SM & 3SF packages.NOTE: “RS or LS” designates seat wall.
ActivLifesolutions
ActivLifesolutions
®
156
TypicalControl
Area
TypicalControl
Area
32-3/4”(std)
34-3/4”(ABF)
32-3/8” Bar 20” Bar
24” Bar
4”
6”
VerticalBar
28-3/4”
Right Side Wall Left (Control) Wall
6”
1”
18-1/2”Seat
13-1/2”1-3/4”
5-1/4”
Right (Seat) Wall Left (Control) Wall
19”
1-1/4”Back Wall
1-1/4”
4” Dam(std model)
6” Dam(ABF model)
Shelf
AccessoryLedge
Shelf
Seam
Seam
Shelf
Seam
Seam
Shelf
AccessoryLedge
32” 1-1/4” 48”
AccessoryLedge
AccessoryLedge
Seam
®
Package Order No.: TLV-(RS or LS) (3-bar & folding seat package)Upgrade Package No.: TLV-(RS or LS) WHT (1-1/4” dia., white powder coat, 3-bar & folding seat package) TLV-(RS or LS) OFW (1-1/4” dia., off-white powder coat, 3-bar & folding seat package) TLV-(RS or LS) SNK (1-1/4” dia., satin nickel, 3-bar & folding seat package)
Package Includes: Factory installed, 1-1/2” dia. stainless steel, 3-bar and folding seat package with basic reinforcement for components (as shown).NOTE: Enhanced reinforcement available, see 3SM & 3SF packages.NOTE: “RS or LS” designates seat wall.
ActivLifesolutions
157
Photographic images may include optional components and appear different than actual product. Dimensions shown are maximum. Due to the nature of the materials involved, actual unit dimensions can vary (tolerances: +0 / -3/8 inch).Oasis reserves the right to modify or discontinue product and/or associated equipment without prior written or verbal notification or obligation.
SH3P4832.00.081513