global leader in rotor dynamic solutions

215 Clinton RoadNew Hartford, NY 13413

Phone: 315-768-4855 Fax: 315-768-4941

riverhawk.com

Rele

ase

Dat

e 0

4/20

15

SHAFT JOINING TECHNOLOGY

HYDRAULIC TORQUE COUPLER

Infinitely adjustable hydraulic coupler with slip-fit components provides ultra-secure clamping of shaft elements while allowing a reduction in shaft diameter and design. Riverhawk also offers a mechanical torque coupler for a cost effective means of clamping shaft elements.

TORQUE METER

Riverhawk, the leading innovator and developer of the on-shaft Torque Metering System, has the leading edge digital design using Hall-Effect sensor technology and strain gage bridges for unparalleled reliability in harsh environments. We are the world’s only supplier of strain gage based torque measurement systems for high performance couplings. Strain gages are a proven technology and provide the most accurate way of measuring torque. They are the only way to obtain an instantaneous torque value. We also offer a Torque Meter that measures in real time.

TORQUE BLOCKER

The Torque Blocker protects heavy duty critical equipment from torque overload by releasing when a preset load is exceeded. There is no sacrificial hardware to replace and machinery is allowed to coast down safely. Reset is simple and quick.

INTERNAL EXPANDINGSHAFT CLAMP

Mechanically activated clamp pressure for high torque capacity. For applications that require secure, keyless mounting of shaft elements such as compressor impellers, pump impellers or gears slip fit components for keyless connections. Quick and easy installation.

RING AND PLUG GAGES

Riverhawk provides a full line of ring and plug gages designed and manufactured to meet your specific shaft end. These items are supplied with certification and calibration traceable to the National Institute of Standards and Technologies. Taper contact of 90% to 95% is guaranteed and bluing tapes can be provided.

VISCOUS ROTATIONAL DAMPERThe Riverhawk VRD transmits continuous torque while protecting connected machines by damping alternating torque vibrations. The design is compact and lightweight and provides efficient heat dissipation. It is accomplished without the use of elastomeric elements that typically degrade overtime. The VRD can be adapted to any coupling.

PRODUCTSRiverhawk Hydraulic Mounting Equipment products consist of specialized tools for the installation and removal of compressor wheels, thrust discs and hydraulically fitted coupling hubs. Hydraulic hand pumps and air over hydraulic pumps offer pressures up to 40,000 psi.

Riverhawk Tensioning Systems products include standard and custom designs that provide controllable and accurate pre-loads of bolts and studs for reliability and ease of installation and removal. We also design and manufacture engineered studs, nuts and bolts for special applications requiring strength and resistance to fatigue, temperature and corrosion.

Riverhawk Shaft Joining Technology products include Hydraulic Clamp Rings that eliminate the need for keyed, splined or tapered shafts. Integrating this technology with torque protection, the Torque blocker protects heavy-duty equipment from torque overloads. Applications requiring continuous operation with momentary torque spikes, the Peak Shaver offers drive through torque protection. Applications involving alternating torque conditions, the Viscous Rotational Damper provides superior damping without traditional elastomeric elements. We also manufacture traditional ring and plug gages for hydraulically fitted coupling hub applications.

ENGINEERING CAPABILTIESUtilizing the latest finite element analysis (FEA) software, Riverhawk Engineers are able to design equipment and confirm stress and/or deflection patterns for both linear and non-linear conditions. We can also build two-dimensional axisymmetric models for essentially cylindrical components or three-dimensional solid models for more complex part configurations.

MANUFACTURINGAll of our turning centers and milling centers are state-of-the-art CNC machines. We also offer grinding of inside and outside diameters to precise specification. Using the best and most up-to-date equipment, we manufacture to exacting tolerances.

CUSTOMER-FOCUSED SERVICEWe offer precision weight matching, calibration and protected storage of shaft end gages. We also provide instruction manuals on equipment installation and maintenance. Contact us with your source inspection requirements. To decrease costly downtime, we offer expedited delivery on any product shipment.

TRAINING SEMINARSWhether it is in-house, off-site or via the web, Riverhawk offers training on a variety of topics focused on the installation, operation and maintenance of our products.

FIELD SERVICEOur experienced field service engineers will work with your field personnel to maximize the use of our equipment to increase productivity at the job site.

Riverhawk Company, an engineering-driven manufacturer, specializes in hydraulic tensioning and bolting solutions in various industries such as Power Generation and Petrochemical markets. Riverhawk’s engineering and sales staff has a strong connection to the rotating equipment industry. Our experienced and hands on engineering staff designs, manufactures and tests equipment supplied to the top OEM’s and end-users in the industry.

Riverhawk designs and manufactures hydraulically tensioned studs and nuts, tensioning tools, and plug and ring gages. We meet the daily challenges of the rotation equipment industry by offering auxiliary equipment such as air driven and manual hydraulic pressure kits and pusher/pullers for the installation of coupling hubs, thrust discs, and compressor wheels.

global leader in rotor dynamic solutions

215 Clinton RoadNew Hartford, NY 13413

Phone: 315-768-4855 Fax: 315-768-4941

riverhawk.com

Rele

ase

Dat

e 0

4/20

15

SHAFT JOINING TECHNOLOGY

HYDRAULIC TORQUE COUPLER

Infinitely adjustable hydraulic coupler with slip-fit components provides ultra-secure clamping of shaft elements while allowing a reduction in shaft diameter and design. Riverhawk also offers a mechanical torque coupler for a cost effective means of clamping shaft elements.

TORQUE METER

Riverhawk, the leading innovator and developer of the on-shaft Torque Metering System, has the leading edge digital design using Hall-Effect sensor technology and strain gage bridges for unparalleled reliability in harsh environments. We are the world’s only supplier of strain gage based torque measurement systems for high performance couplings. Strain gages are a proven technology and provide the most accurate way of measuring torque. They are the only way to obtain an instantaneous torque value. We also offer a Torque Meter that measures in real time.

TORQUE BLOCKER

The Torque Blocker protects heavy duty critical equipment from torque overload by releasing when a preset load is exceeded. There is no sacrificial hardware to replace and machinery is allowed to coast down safely. Reset is simple and quick.

INTERNAL EXPANDINGSHAFT CLAMP

Mechanically activated clamp pressure for high torque capacity. For applications that require secure, keyless mounting of shaft elements such as compressor impellers, pump impellers or gears slip fit components for keyless connections. Quick and easy installation.

RING AND PLUG GAGES

Riverhawk provides a full line of ring and plug gages designed and manufactured to meet your specific shaft end. These items are supplied with certification and calibration traceable to the National Institute of Standards and Technologies. Taper contact of 90% to 95% is guaranteed and bluing tapes can be provided.

VISCOUS ROTATIONAL DAMPERThe Riverhawk VRD transmits continuous torque while protecting connected machines by damping alternating torque vibrations. The design is compact and lightweight and provides efficient heat dissipation. It is accomplished without the use of elastomeric elements that typically degrade overtime. The VRD can be adapted to any coupling.

PRODUCTSRiverhawk Hydraulic Mounting Equipment products consist of specialized tools for the installation and removal of compressor wheels, thrust discs and hydraulically fitted coupling hubs. Hydraulic hand pumps and air over hydraulic pumps offer pressures up to 40,000 psi.

Riverhawk Tensioning Systems products include standard and custom designs that provide controllable and accurate pre-loads of bolts and studs for reliability and ease of installation and removal. We also design and manufacture engineered studs, nuts and bolts for special applications requiring strength and resistance to fatigue, temperature and corrosion.

Riverhawk Shaft Joining Technology products include Hydraulic Clamp Rings that eliminate the need for keyed, splined or tapered shafts. Integrating this technology with torque protection, the Torque blocker protects heavy-duty equipment from torque overloads. Applications requiring continuous operation with momentary torque spikes, the Peak Shaver offers drive through torque protection. Applications involving alternating torque conditions, the Viscous Rotational Damper provides superior damping without traditional elastomeric elements. We also manufacture traditional ring and plug gages for hydraulically fitted coupling hub applications.

ENGINEERING CAPABILTIESUtilizing the latest finite element analysis (FEA) software, Riverhawk Engineers are able to design equipment and confirm stress and/or deflection patterns for both linear and non-linear conditions. We can also build two-dimensional axisymmetric models for essentially cylindrical components or three-dimensional solid models for more complex part configurations.

MANUFACTURINGAll of our turning centers and milling centers are state-of-the-art CNC machines. We also offer grinding of inside and outside diameters to precise specification. Using the best and most up-to-date equipment, we manufacture to exacting tolerances.

CUSTOMER-FOCUSED SERVICEWe offer precision weight matching, calibration and protected storage of shaft end gages. We also provide instruction manuals on equipment installation and maintenance. Contact us with your source inspection requirements. To decrease costly downtime, we offer expedited delivery on any product shipment.

TRAINING SEMINARSWhether it is in-house, off-site or via the web, Riverhawk offers training on a variety of topics focused on the installation, operation and maintenance of our products.

FIELD SERVICEOur experienced field service engineers will work with your field personnel to maximize the use of our equipment to increase productivity at the job site.

Riverhawk Company, an engineering-driven manufacturer, specializes in hydraulic tensioning and bolting solutions in various industries such as Power Generation and Petrochemical markets. Riverhawk’s engineering and sales staff has a strong connection to the rotating equipment industry. Our experienced and hands on engineering staff designs, manufactures and tests equipment supplied to the top OEM’s and end-users in the industry.

Riverhawk designs and manufactures hydraulically tensioned studs and nuts, tensioning tools, and plug and ring gages. We meet the daily challenges of the rotation equipment industry by offering auxiliary equipment such as air driven and manual hydraulic pressure kits and pusher/pullers for the installation of coupling hubs, thrust discs, and compressor wheels.

global leader in rotor dynamic solutions

215 Clinton RoadNew Hartford, NY 13413

Phone: 315-768-4855 Fax: 315-768-4941

riverhawk.com

Rele

ase

Dat

e 0

4/20

15

SHAFT JOINING TECHNOLOGY

HYDRAULIC TORQUE COUPLER

Infinitely adjustable hydraulic coupler with slip-fit components provides ultra-secure clamping of shaft elements while allowing a reduction in shaft diameter and design. Riverhawk also offers a mechanical torque coupler for a cost effective means of clamping shaft elements.

TORQUE METER

Riverhawk, the leading innovator and developer of the on-shaft Torque Metering System, has the leading edge digital design using Hall-Effect sensor technology and strain gage bridges for unparalleled reliability in harsh environments. We are the world’s only supplier of strain gage based torque measurement systems for high performance couplings. Strain gages are a proven technology and provide the most accurate way of measuring torque. They are the only way to obtain an instantaneous torque value. We also offer a Torque Meter that measures in real time.

TORQUE BLOCKER

The Torque Blocker protects heavy duty critical equipment from torque overload by releasing when a preset load is exceeded. There is no sacrificial hardware to replace and machinery is allowed to coast down safely. Reset is simple and quick.

INTERNAL EXPANDINGSHAFT CLAMP

Mechanically activated clamp pressure for high torque capacity. For applications that require secure, keyless mounting of shaft elements such as compressor impellers, pump impellers or gears slip fit components for keyless connections. Quick and easy installation.

RING AND PLUG GAGES

Riverhawk provides a full line of ring and plug gages designed and manufactured to meet your specific shaft end. These items are supplied with certification and calibration traceable to the National Institute of Standards and Technologies. Taper contact of 90% to 95% is guaranteed and bluing tapes can be provided.

VISCOUS ROTATIONAL DAMPERThe Riverhawk VRD transmits continuous torque while protecting connected machines by damping alternating torque vibrations. The design is compact and lightweight and provides efficient heat dissipation. It is accomplished without the use of elastomeric elements that typically degrade overtime. The VRD can be adapted to any coupling.

PRODUCTSRiverhawk Hydraulic Mounting Equipment products consist of specialized tools for the installation and removal of compressor wheels, thrust discs and hydraulically fitted coupling hubs. Hydraulic hand pumps and air over hydraulic pumps offer pressures up to 40,000 psi.

Riverhawk Tensioning Systems products include standard and custom designs that provide controllable and accurate pre-loads of bolts and studs for reliability and ease of installation and removal. We also design and manufacture engineered studs, nuts and bolts for special applications requiring strength and resistance to fatigue, temperature and corrosion.

Riverhawk Shaft Joining Technology products include Hydraulic Clamp Rings that eliminate the need for keyed, splined or tapered shafts. Integrating this technology with torque protection, the Torque blocker protects heavy-duty equipment from torque overloads. Applications requiring continuous operation with momentary torque spikes, the Peak Shaver offers drive through torque protection. Applications involving alternating torque conditions, the Viscous Rotational Damper provides superior damping without traditional elastomeric elements. We also manufacture traditional ring and plug gages for hydraulically fitted coupling hub applications.

ENGINEERING CAPABILTIESUtilizing the latest finite element analysis (FEA) software, Riverhawk Engineers are able to design equipment and confirm stress and/or deflection patterns for both linear and non-linear conditions. We can also build two-dimensional axisymmetric models for essentially cylindrical components or three-dimensional solid models for more complex part configurations.

MANUFACTURINGAll of our turning centers and milling centers are state-of-the-art CNC machines. We also offer grinding of inside and outside diameters to precise specification. Using the best and most up-to-date equipment, we manufacture to exacting tolerances.

CUSTOMER-FOCUSED SERVICEWe offer precision weight matching, calibration and protected storage of shaft end gages. We also provide instruction manuals on equipment installation and maintenance. Contact us with your source inspection requirements. To decrease costly downtime, we offer expedited delivery on any product shipment.

TRAINING SEMINARSWhether it is in-house, off-site or via the web, Riverhawk offers training on a variety of topics focused on the installation, operation and maintenance of our products.

FIELD SERVICEOur experienced field service engineers will work with your field personnel to maximize the use of our equipment to increase productivity at the job site.

Riverhawk Company, an engineering-driven manufacturer, specializes in hydraulic tensioning and bolting solutions in various industries such as Power Generation and Petrochemical markets. Riverhawk’s engineering and sales staff has a strong connection to the rotating equipment industry. Our experienced and hands on engineering staff designs, manufactures and tests equipment supplied to the top OEM’s and end-users in the industry.

Riverhawk designs and manufactures hydraulically tensioned studs and nuts, tensioning tools, and plug and ring gages. We meet the daily challenges of the rotation equipment industry by offering auxiliary equipment such as air driven and manual hydraulic pressure kits and pusher/pullers for the installation of coupling hubs, thrust discs, and compressor wheels.

HYDRAULIC MOUNTING EQUIPMENT TENSIONING SYSTEMS

HYDRAULIC INSTALLATION KITS

Two integrated hydraulic pumps and gauges, pressure tested to full capacity, provide a lightweight, easyto- carry unit capable of both high (35,000 psi) and low (10,000 psi) pressure conditions.

AIR DRIVEN HYDRAULICPRESSURE KIT

The Riverhawk air-driven hydraulic pump kit utilizes input air pressure of 80 - 100 PSI to generate a high-pressure output. Incoming air is filtered before it enters the system. An air regulator is used to provide any intermediate pressure required within the limits of the output range of the pump allowing the pump to hold at any predetermined hydraulic pressure. Simple and safe swivel fittings are used to connect the equipment being pressurized.

EXTERNAL STUD TENSIONER

The stud tensioner eliminates the inaccuracies associated with torquing. Riverhawk tensioners offer flexibility and versatility through modular designs that incorporate a wide range of stud sizes.

HRT TENSIONING SYSTEM

Recognizing the specific need for tensioning designed for high ambient temperature and minimum envelope ap-plications, Riverhawk offers the Hydraulic Rod Tensioning System. No longer of con-cern are design limiting considerations such as temperature, seals, lubricants and coatings. In addition, the HRT System is designed to retrofit directly into existing installation requirements.

THE CASING ALIGNMENT PIN (CAP)

Designed to reduce assembly time while increasing safety when dealing with misaligned casing bolt holes. Convention-al bolt alignment methods consist of bolt torque sequencing or hammering studs which is time consuming and could lead to damaged components. The CAP gives you the ease of a drop in installation but also providing you with the angular force necessary to correct misalignment.

HYDRAULIC SAFETY INTERLOCK TENSIONER (HSIG)

Our newest tooling has a hydraulic interlock design which renders it inoperable if the clamp is not properly secured. It utilizes the Riverhawk patented hydraulic rod tensioner design which helps with a lower lift weight. The HSIG (Hydraulic Safety Interlocking Guard) has separable components which make them easily replaced for less down time. The implemented “dead stop” prevents over stroke and it also has over pressurization protect. .

TALON CROSSHEAD NUT

Riverhawk Engineering has incorporated distinctive design features within the traditional hydraulic nut to prevent piston rod bending and fatigue failures. The Talon produces enhanced preload repeatability for improved compressor life. This hydraulic crosshead nut supplies uniform loading on the crosshead bearing face to provide long life to the pis-ton road and crosshead slide. Meets API 618 Specifications.

PEREGRINE TENSIONER

Lightest weight and smallest overall diameter of bolt tensioners amongst its capability. Offers spring return piston that eliminates the need to press piston back after each use. Implemented over stroke stop that prevents seal damage and leakage that also has a visual color coded indicator to identify an over stroke. Standard sizes cover stud diameters 1”-4”.

HYDRAULIC PUSHER ANDPULLER ASSEMBLIES

Riverhawk has developed a full line of hydraulic pushers and pullers to accommodate any shaft end and coupling configuration. The tools are designed specifically for your application and provide full pull-up capability. These items are made from hardened alloy steel, are pressure tested prior to shipment from our facility and come to you completely assembled to include all seals and fittings to match your installation equipment.

CART MOUNTED AIR DRIVENHYDRAULIC PUMP

The Cart Mounted Air Driven Hydraulic Pump is an upgraded adaptation of the Riverhawk Air Driven Hydraulic Pressure Kit,which has been field tested and proven reliable. An output pressure of up to 40,000 psi is generated using an air input supply of 80-120 psi. Reservoir capacity is customized to suit the application.

ENGINEERED STUDS, NUTS AND BOLTS

Uniquely engineered with finite element analysis (FEA) and precision-machined for applications requiring strength and resistance to fatigue, temperature and corrosion.

HYDRAULICALLY FITTED COUPLING BOLT

This hydraulic fitted coupling bolt considerably decreases the time needed for flange assembly and disassembly. The result is trouble free installation and lower outage time. The Riverhawk design is reusable and particularly suited for retrofits.

EXTERNAL TENSIONING SYSTEM

This product provides a seamless transition from torqued hardware to tensioned hardware. Until now, it has not been possible to replace torqued hardware with tensioned hardware unless there was a significant amount of stud thread protruding above the nut. Historically, this transition involved replacing the stud as well but with the Riverhawk ETN this is no longer the case.

HYDRAULIC BOLT/STUD TENSIONERS

Individually designed and hydraulically operated to provide controllable and accurate pre-loads of bolts and nuts for reliability and ease of installation and removal

HYDRAULIC TENSIONED NUT

Precision tension applied hydraulically to casings, flanges, bearing housings or connecting rods – lowering costs for parts and labor and providing the best choice for many different applications.

HYDRAULIC MOUNTING EQUIPMENT TENSIONING SYSTEMS

HYDRAULIC INSTALLATION KITS

Two integrated hydraulic pumps and gauges, pressure tested to full capacity, provide a lightweight, easyto- carry unit capable of both high (35,000 psi) and low (10,000 psi) pressure conditions.

AIR DRIVEN HYDRAULICPRESSURE KIT

The Riverhawk air-driven hydraulic pump kit utilizes input air pressure of 80 - 100 PSI to generate a high-pressure output. Incoming air is filtered before it enters the system. An air regulator is used to provide any intermediate pressure required within the limits of the output range of the pump allowing the pump to hold at any predetermined hydraulic pressure. Simple and safe swivel fittings are used to connect the equipment being pressurized.

EXTERNAL STUD TENSIONER

The stud tensioner eliminates the inaccuracies associated with torquing. Riverhawk tensioners offer flexibility and versatility through modular designs that incorporate a wide range of stud sizes.

HRT TENSIONING SYSTEM

Recognizing the specific need for tensioning designed for high ambient temperature and minimum envelope ap-plications, Riverhawk offers the Hydraulic Rod Tensioning System. No longer of con-cern are design limiting considerations such as temperature, seals, lubricants and coatings. In addition, the HRT System is designed to retrofit directly into existing installation requirements.

THE CASING ALIGNMENT PIN (CAP)

Designed to reduce assembly time while increasing safety when dealing with misaligned casing bolt holes. Convention-al bolt alignment methods consist of bolt torque sequencing or hammering studs which is time consuming and could lead to damaged components. The CAP gives you the ease of a drop in installation but also providing you with the angular force necessary to correct misalignment.

HYDRAULIC SAFETY INTERLOCK TENSIONER (HSIG)

Our newest tooling has a hydraulic interlock design which renders it inoperable if the clamp is not properly secured. It utilizes the Riverhawk patented hydraulic rod tensioner design which helps with a lower lift weight. The HSIG (Hydraulic Safety Interlocking Guard) has separable components which make them easily replaced for less down time. The implemented “dead stop” prevents over stroke and it also has over pressurization protect. .

TALON CROSSHEAD NUT

Riverhawk Engineering has incorporated distinctive design features within the traditional hydraulic nut to prevent piston rod bending and fatigue failures. The Talon produces enhanced preload repeatability for improved compressor life. This hydraulic crosshead nut supplies uniform loading on the crosshead bearing face to provide long life to the pis-ton road and crosshead slide. Meets API 618 Specifications.

PEREGRINE TENSIONER

Lightest weight and smallest overall diameter of bolt tensioners amongst its capability. Offers spring return piston that eliminates the need to press piston back after each use. Implemented over stroke stop that prevents seal damage and leakage that also has a visual color coded indicator to identify an over stroke. Standard sizes cover stud diameters 1”-4”.

HYDRAULIC PUSHER ANDPULLER ASSEMBLIES

Riverhawk has developed a full line of hydraulic pushers and pullers to accommodate any shaft end and coupling configuration. The tools are designed specifically for your application and provide full pull-up capability. These items are made from hardened alloy steel, are pressure tested prior to shipment from our facility and come to you completely assembled to include all seals and fittings to match your installation equipment.

CART MOUNTED AIR DRIVENHYDRAULIC PUMP

The Cart Mounted Air Driven Hydraulic Pump is an upgraded adaptation of the Riverhawk Air Driven Hydraulic Pressure Kit,which has been field tested and proven reliable. An output pressure of up to 40,000 psi is generated using an air input supply of 80-120 psi. Reservoir capacity is customized to suit the application.

ENGINEERED STUDS, NUTS AND BOLTS

Uniquely engineered with finite element analysis (FEA) and precision-machined for applications requiring strength and resistance to fatigue, temperature and corrosion.

HYDRAULICALLY FITTED COUPLING BOLT

This hydraulic fitted coupling bolt considerably decreases the time needed for flange assembly and disassembly. The result is trouble free installation and lower outage time. The Riverhawk design is reusable and particularly suited for retrofits.

EXTERNAL TENSIONING SYSTEM

This product provides a seamless transition from torqued hardware to tensioned hardware. Until now, it has not been possible to replace torqued hardware with tensioned hardware unless there was a significant amount of stud thread protruding above the nut. Historically, this transition involved replacing the stud as well but with the Riverhawk ETN this is no longer the case.

HYDRAULIC BOLT/STUD TENSIONERS

Individually designed and hydraulically operated to provide controllable and accurate pre-loads of bolts and nuts for reliability and ease of installation and removal

HYDRAULIC TENSIONED NUT

Precision tension applied hydraulically to casings, flanges, bearing housings or connecting rods – lowering costs for parts and labor and providing the best choice for many different applications.

HYDRAULIC MOUNTING EQUIPMENT TENSIONING SYSTEMS

HYDRAULIC INSTALLATION KITS

Two integrated hydraulic pumps and gauges, pressure tested to full capacity, provide a lightweight, easyto- carry unit capable of both high (35,000 psi) and low (10,000 psi) pressure conditions.

AIR DRIVEN HYDRAULICPRESSURE KIT

The Riverhawk air-driven hydraulic pump kit utilizes input air pressure of 80 - 100 PSI to generate a high-pressure output. Incoming air is filtered before it enters the system. An air regulator is used to provide any intermediate pressure required within the limits of the output range of the pump allowing the pump to hold at any predetermined hydraulic pressure. Simple and safe swivel fittings are used to connect the equipment being pressurized.

EXTERNAL STUD TENSIONER

The stud tensioner eliminates the inaccuracies associated with torquing. Riverhawk tensioners offer flexibility and versatility through modular designs that incorporate a wide range of stud sizes.

HRT TENSIONING SYSTEM

Recognizing the specific need for tensioning designed for high ambient temperature and minimum envelope ap-plications, Riverhawk offers the Hydraulic Rod Tensioning System. No longer of con-cern are design limiting considerations such as temperature, seals, lubricants and coatings. In addition, the HRT System is designed to retrofit directly into existing installation requirements.

THE CASING ALIGNMENT PIN (CAP)

Designed to reduce assembly time while increasing safety when dealing with misaligned casing bolt holes. Convention-al bolt alignment methods consist of bolt torque sequencing or hammering studs which is time consuming and could lead to damaged components. The CAP gives you the ease of a drop in installation but also providing you with the angular force necessary to correct misalignment.

HYDRAULIC SAFETY INTERLOCK TENSIONER (HSIG)

Our newest tooling has a hydraulic interlock design which renders it inoperable if the clamp is not properly secured. It utilizes the Riverhawk patented hydraulic rod tensioner design which helps with a lower lift weight. The HSIG (Hydraulic Safety Interlocking Guard) has separable components which make them easily replaced for less down time. The implemented “dead stop” prevents over stroke and it also has over pressurization protect. .

TALON CROSSHEAD NUT

Riverhawk Engineering has incorporated distinctive design features within the traditional hydraulic nut to prevent piston rod bending and fatigue failures. The Talon produces enhanced preload repeatability for improved compressor life. This hydraulic crosshead nut supplies uniform loading on the crosshead bearing face to provide long life to the pis-ton road and crosshead slide. Meets API 618 Specifications.

PEREGRINE TENSIONER

Lightest weight and smallest overall diameter of bolt tensioners amongst its capability. Offers spring return piston that eliminates the need to press piston back after each use. Implemented over stroke stop that prevents seal damage and leakage that also has a visual color coded indicator to identify an over stroke. Standard sizes cover stud diameters 1”-4”.

HYDRAULIC PUSHER ANDPULLER ASSEMBLIES

Riverhawk has developed a full line of hydraulic pushers and pullers to accommodate any shaft end and coupling configuration. The tools are designed specifically for your application and provide full pull-up capability. These items are made from hardened alloy steel, are pressure tested prior to shipment from our facility and come to you completely assembled to include all seals and fittings to match your installation equipment.

CART MOUNTED AIR DRIVENHYDRAULIC PUMP

The Cart Mounted Air Driven Hydraulic Pump is an upgraded adaptation of the Riverhawk Air Driven Hydraulic Pressure Kit,which has been field tested and proven reliable. An output pressure of up to 40,000 psi is generated using an air input supply of 80-120 psi. Reservoir capacity is customized to suit the application.

ENGINEERED STUDS, NUTS AND BOLTS

Uniquely engineered with finite element analysis (FEA) and precision-machined for applications requiring strength and resistance to fatigue, temperature and corrosion.

HYDRAULICALLY FITTED COUPLING BOLT

This hydraulic fitted coupling bolt considerably decreases the time needed for flange assembly and disassembly. The result is trouble free installation and lower outage time. The Riverhawk design is reusable and particularly suited for retrofits.

EXTERNAL TENSIONING SYSTEM

This product provides a seamless transition from torqued hardware to tensioned hardware. Until now, it has not been possible to replace torqued hardware with tensioned hardware unless there was a significant amount of stud thread protruding above the nut. Historically, this transition involved replacing the stud as well but with the Riverhawk ETN this is no longer the case.

HYDRAULIC BOLT/STUD TENSIONERS

Individually designed and hydraulically operated to provide controllable and accurate pre-loads of bolts and nuts for reliability and ease of installation and removal

HYDRAULIC TENSIONED NUT

Precision tension applied hydraulically to casings, flanges, bearing housings or connecting rods – lowering costs for parts and labor and providing the best choice for many different applications.