SummaryUniCam eMES for electronics manufacturing software from Siemens PLM Software is a comprehensive manufacturing execution solution that enables PCB and box assem-blers to meet traceability requirements, control production.

UniCam eMES helps you address all these issues on a scalable and modular platform for electronic production.

www.siemens.com/unicam

Quality managementThe software enables automatic data col-lection from the shop floor for real-time trend monitoring. Should yields drop below acceptable thresholds, system alarms and notifications are activated to enable process management. Powerful Pareto and statisti-cal process control (SPC) reporting allow root-cause analysis, eliminating the guess work in correcting process defects.

WIP monitoring and route enforcementUniCam eMES enables you to enforce board and box manufacturing routes and ensures that every pass of a WIP station is time and date-stamped for full process traceability. You can monitor WIP progress in real-time via a web browser.

Defect logging and repairYou can use UniCam eMES to help auto-matically capture defect data from dedicated testers, assist with root-cause analysis and repair processes. You can use the software to record the rework and repair and to provide real-time and histori-cal reporting.

Answers for industry.

UniCam eMESOut-of-the-box manufacturing execution system for the electronics industry

Benefits• Make the shop floor fully

transparent

• Enable traceability for electronics production.

• Minimize size of product recalls and internal rework

• Gain real-time visibility to work in process (WIP), finished goods and status

• Reduce test errors and false failures through alarms and quality enforcement

• Analyze production information and get to the root cause of issues in real-time

• Enable continuous improvement of product and process quality with a single integrated system

• Detect early occurrence of deviation and manage corrective action

UniCam eMES

ELECTRONICSMANUFACTURING

ContactSiemens PLM SoftwareAmericas +800 848 7372 Europe +0049 8382 949716 Asia-Pacific +86 755 8246 1838 x2613

www.siemens.com/unicam

© 2014 Siemens Product Lifecycle Management Software Inc. Siemens and the Siemens logo are registered trade marks of Siemens AG. D-Cubed, Femap, Geolus, GO PLM, I-deas, JT, NX, Parasolid, Solid Edge, Teamcenter, Tecnomatix and UniCam are trademarks or registered trademarks of Siemens Product Lifecycle Management Software Inc. or its subsidiaries in the United States and in other countries. All other logos, trade-marks, registered trademarks or service marks used herein are the property of their respective holders. Y8 37733 2/14 B

Box build traceability UniCam eMES enables you to capture all the relationships in a full system build from BOM to PCB to final box-build, including repairs undertaken and changes introduced.

Component traceabilityThe software enables you to perform web-based traceability queries by component, board level and surface mount technology

(SMT) line history. You can also use UniCam eMES to archive data for post-prod-uct traceability and to address field queries.

Web reporting and dashboardsThin client web browsers offer full visibility whether on the shop floor or at a remote location.

Benefits continued• Establish a shop floor

quality and operational metrics baseline and track improvements

Features• MES solution for electronic

PCB and box production

• Quality data collection and reporting

• Online monitoring with alarms

• Route checking and process interlocking

• Test and repair process

• Component traceability

• PCB box build

• Tight integration with electronics new product introduction (NPI)