SIG - Introduction

82 www.kavanrc.com

SIG

- In

trod

uction

For over 50 years SIG has manufactured quality products for aero modelers from around the world.

SIG - R/C Airplanes

SIG offers both ARF (Almost Ready to Fly) and BIY (Build It Yourself) radio controlled airplanes. Both include quality hardware, such ashinges, control horns, etc. Where applicable landing gear, canopy, windows and decals are also included. High quality balsa and plywoodwith step-by-step detailed instructions in English and German make construction simple and enjoyable. The BIY airplane kits include full sizebuilding plans. The ARF airplanes are precisely constructed to SIG's specifications and covered with Oracover® polyester film.

SIG - C/L Airplanes

Most of the C/L (Control Line) airplane kits are easy-to-build balsa Profile models. Generally, each kit includes hinges, nylon bell crank, control horn, formed wire pushrods,decals, and detailed English/German instructions. Where applicable, the canopy and formed wire landing gear are also included.

SIG - F/F Airplanes

The F/F (Free Flight) airplane kits contain high quality balsa, prop, contest rubber motor, covering material, detailed building and flying instructions in English and Ger-man. Where applicable, the landing gear and wheels are also included.

Kit Content Order No. SIGRC80ARFG

Kit Content Order No. SIGRC67ARF

Kit Content Order No. SIGRC76ARFV

SIG Retail Catalog50 year Anniversary Catalog. Over150 pages of model airplanes andaccessories. English language only.SIG product (Order Nos. SIGxxxxx)that KAVAN doesn't stock can bespecial ordered from KAVAN. Pricesshown are not applicable in Europe.

Order No. SIGSC64

Order No. SIGSC64

83www.kavanrc.com

SIG

- R/C

Ele

ctric

Airpl

anesLi'l Rascal Electric ARF

Got a minute? Lunchtime, coffee break, almost any time is flying time with theeasy to transport Li'l Rascal. Extremely stable yet aerobatic and easy to fly even inwinds that might ground other small electric airplanes. Hand assembled usingonly the finest balsa and lite-plywood then expertly finished with Oracover®

polyester film in the classic Rascal motif. Li'l Rascal assembles quickly with theone-piece pre-assembled wing and factory installed motor/gearbox.

Includes: 180-size motor, 2.9:1 GearBox, hardware, decals, and illustratedinstruction manual.

Controls: rudder, elevator and motorYou need the following to complete the Li'l Rascal ARF:Speed Controller: SlowFlyer 6A w/K1 Gold connector Order No. 6483Ni-MH battery pack: 7x 350 w/K1 Gold connector Order No. 6640.07Fast Charger: Mini Charger, 4-7 cells Order No. 6440Charging cable: with K1 Gold Connector Order No. 6440.1Radio control set: 3 Channels, Micro receiver, 2 micro servos (9 g or less)

SpecificationsWingspan: 755 mmWing Area: 8.6 dm²Length: 520 mmFlying Weight: 240 - 270 g

Li'l Rascal Electric ARF, Trans. Blue/White Order No. SIGRC88ARFBLi'l Rascal Electric ARF, Trans. Red/White Order No. SIGRC88ARFR

Rascal Electric ARFClean lines, classic looks, easy flying yet responsive. The included geared 400-sizemotor gives outstanding lift and normal flight duration near ten minutes. Find athermal, and sit back for a long, leisurely flight. Turn it up a little, and the RascalARF will shake your soul with loops and rolls� even inverted flight. Handassembled using only the finest balsa and lite-plywood then expertly finished in atwo-tone color scheme with Oracover® polyester film.

Includes: SIG 20A Speed Control presoldered to the motor, Gearbox (Order No.MXACC347), wheels, decals, hardware and illustrated instruction manual.

Controls: rudder, elevator and motor

You need the following to complete the Rascal ARF:Ni-Cd battery pack: 7x 600AE w/K2 Gold connector Order No. 6439.07Fast Charger: Mini Charger, 4-7 cells Order No. 6440Charging cable: with K2 Gold Connector Order No. 6323Prop: 8x6 APC Thin Electric Propeller Order No. AP.308060Radio control set: 3 Channels, Micro receiver, 2 micro servos (9 g or less)

SpecificationsWingspan: 1245 mmLength: 825.5 mmWing Area: 20.9 dm²Flying Weight: 623 - 680 gRascal Electric ARF Trans. Green/White SIGRC80ARFGRascal Electric ARF Trans. Violet/White SIGRC80ARFV

Order No. SIGRC80ARFV

Order No. SIGRC88ARFB

Includes

Includes

84 www.kavanrc.com

SIG

- R/C

Ele

ctric

Airpl

anes SIG ParkFlyers Electric ARF

All three planes are constructed of lightweight yet strong, injection foam then factorypainted. The two one-piece airfoiled wings are factory finished and attach to thefuselage using a strong cabane structure. Flying these beauties couldn't be easier. Ingentle breezes, these semi scale WWI veterans take to the sky using only about 6 mof runway. Cruise airspeed is just 8-11 kph, so there's time to react in small parksettings or indoors.

Each ARF Includes: 180-size motor, 4.4:1 GearBox, prop, cowling, wheels, hardware,decals, and illustrated instruction manual.


You need the following to complete each airplane:Speed Controller: SlowFlyer 5A w/K1 Gold connector Order No. 6483Ni-MH battery pack: 6x 650 mAh w/K1 Gold connector Order No. 6641.06 orNi-MH battery pack: 6x 750 mAh w/K1 Gold connector Order No. 6643.06Fast charger: Mini Charger, 4-7 cells Order No. 6440Charging cable: K1 Gold connector Order No. 6440.1Radio control set: 3 channel, Micro receiver, 2 micro servos (9 g or less)

Specifications Curtiss Jenny Bristol Scout Fokker D-VIIWingspan: 822 mm 782 mm 830 mmLength: 648 mm 648 mm 602 mmWing Area: 18.4 dm² 19.5 dm² 17.6 dm²Flying Weight: 295 - 310 g 305 - 320 g 305 - 310 gWing Loading: 16 - 16.9 g/dm² 15.6 - 16.4 g/dm² 17.3 - 17.6 g/dm²Origin: America England Germany

Order No. SIGRC93ARF SIGRC94ARF SIGRC95ARF

Order No. SIGRC94ARF



Includes

85www.kavanrc.com

SIG

- R/C

Ele

ctric

Airpl

anesR/C Indoor "Pioneers of Flight" BIY

Travel back to yesteryear when courageous young men createdmagnificent flying machines to break the bonds of motherearth and soar with the eagles. Designed to fly indoors or inno-wind conditions. Laser-cut parts for outstanding accuracyand ease of assembly.

1909 Antoinette

Check out the delicate wing foil, the unique rigging and scalelike pilot with his scarf flapping in the breeze.

1909 Demoiselle

Check out the operational, fully articulated flying stab, thereplica engines, and the early aviator pilot figure.

Each kit Includes: Lite-Span covering material, simulatedrigging, pull-pull lines, wheels, tires, hardware and illustratedinstruction manual.


You need the following to complete each airplane:

SIG Indoor Motor/Gearbox Drive Set Order No. SIGEPU001Speed Controller: SlowFlyer 5A Order No. 6483Ni-MH battery pack: 7x 650 mAh Order No. 6641.07Fast charger: Mini Charger, 4-7 cells Order No. 6440Charging cable: K1 Gold connector Order No. 6440.1Balsaloc, paints and gluesRadio control set:3 channel, Micro receiver, 2 micro servos (9 g or less)

Specifications 1909 Antoinette 1909 Demoiselle

Wingspan: 1270 mm 1130 mmFuse Length: 1194 mm 889 mmWing Area: 32.9 dm² 32.9 dm²Weight*: 210 - 230 g 185 - 200 g*Weight w/o the 7 cell Ni-Cd pack

Order No. SIGRC91 Order No. SIGRC90

Order No. SIGRC90

Order No. SIGRC91

SIG Indoor Motor/Gearbox Drive Set

Designed for 1909 Antoinette, 1909 Demoiselle and similarindoor R/C airplanes. Includes a micro motor, dual ballinggearbox, spinner and 10x4.75 prop.

Order No. SIGEPU001

Order No. SIGEPU001

86 www.kavanrc.com

HERR E

NG

INEERIN

G

Order No. HRR501

Herr's 1/2A (.049) powered models assemblequickly, are convenient to transport, and provideoutstanding performance with minimal fuel con-sumption. Designed for glow and/or electric power,mini servos recommended. All airplanes featurelaser Accu-cut� hand-select SIG AAA grade balsa.3-D CAD engineered for a precise parts fit. Includesfull size computer drawn plans, quality hardwaresuch as clear canopy, molded plastic cowl, pre-bentlanding gears, colorful decals, and a complete stepby step English/German instruction manual. MiniFloats fit HRR505, HRR508 and similar airplanes.

Name Wing Span Weight Approx. Engine / Motor (required) Radio (required) Servos (req.) Order No.

AT-6 Texan 914 mm 540 g .049 - .061 in3 (0.8 - 1.0 cm3) 2 or 3 Channel Std. or Mini HRR501Aqua Star 1029 mm 540 g .049 - .061 in3 (0.8 - 1.0 cm3) 2 or 3 Channel Std. or Mini HRR502Star Cruiser Trainer 1067 mm 480 g .049 - .061 in3 (0.8 - 1.0 cm3) 2 or 3 Channel Std. or Mini HRR503Piper Cherokee 1067 mm 540 g .049 - .061 in3 (0.8 - 1.0 cm3) 2 or 3 Channel Std. or Mini HRR504Piper J-3 Cub 1219 mm 570 g .049 - .061 in3 (0.8 - 1.0 cm3) 2 or 3 Channel Std. or Mini HRR505P-51 Mustang 1067 mm 620 g .049 - .074 in3 (0.8 - 1.21 cm3) 4 Channel Std. or Mini HRR506Pitts Special 762 mm 740 g .074 - .15 in3 (1.2 - 2.45 cm3) 4 Channel Mini HRR507Cloud Ranger 1067 mm 470 - 570 g .049 - .061 in3 (0.8 - 1.0 cm3) / Speed 400 3 or 4 Channel Std. or Mini HRR508Cessna 180 Skywagon 1105 mm 600 g .049 - .061 in3 (0.8 - 1.0 cm3) 3 Channel Std. or Mini HRR510Mini Floats 603 mm long 140 g .061 - .15 in3 (1.0 - 2.45 cm3) N/A N/A HRR509

Order No. HRR502 Order No. HRR503 Order No. HRR504 Order No. HRR505

Order No. HRR506 Order No. HRR507 Order No. HRR508 Order No. HRR509(Mini Floats only)

Order No. HRR510

Herr's Breezy Day ParkFlyers look and fly like real airplanesproviding a level of performance allowing them to fly longafter the wind has grounded many other ParkFlyers. Allairplanes feature laser Accu-cut� hand-select SIG AAAgrade balsa. 3-D CAD engineered for a precise parts fit.Includes full size computer drawn plans, quality hardwaresuch as propeller, landing gear wire & wheels (except Rally-XP), colorful decals, and a complete step by step English/German instruction manual.

Order No. HRR302 Order No. HRR303 Order No. HRR304 Order No. HRR305

Name Wing Span Weight Approx. Motor (required) Speed Controller (required) Battery (required) Servos (req.) Order No.

Piper J-3 Cub 895 mm 320 g Swift 280 (Order No. 6496) 5A SlowFly (Order No. 6483) 8x 650 mAh (Order No. 6641.08) 2x Micro HRR302Rally-XP 1226 mm 320 g Swift 280 (Order No. 6496) 5A SlowFly (Order No. 6483) 8x 650 mAh (Order No. 6641.08) 2x Micro HRR303Mini Sport 908 mm 320 g Swift 280 (Order No. 6496) 5A SlowFly (Order No. 6483) 8x 650 mAh (Order No. 6641.08) 2x Micro HRR304Air Boss 908 mm 320 g Swift 280 (Order No. 6496) 5A SlowFly (Order No. 6483) 8x 650 mAh (Order No. 6641.08) 2x Micro HRR305

HERR ENGINEERING R/C Model Airplanes BIY

HERR ENGINEERING Breezy Day ParkFlyers BIY

87www.kavanrc.com

HERR E

NG

INEERIN

GFree Flight Rubber Powered Airplanes BIY

Although designed as rubber powered free flight models somepeople choose not to fly these but instead build them as a beauti-ful covered or uncovered display model. With the increasedpopularity of Slow and ParkFlyer airplanes experienced modelershave converted these to small flying radio controlled aircraft.Instructions are not included for converting these airplanes toradio controlled aircraft. But it is a natural project for the experi-enced modeler because the stable flight characteristics associatedto free flight models make good Slow and ParkFlyer aircraft.Typically only rudder, elevator and motor control are added usingmicro servos and receiver. Use 280-size motors geared or direct upto 400-size direct for the Piper J-3 Cub.

Example: Scout (Order No. HRR101)Motor: Swift 280 (Order No. 6496)Propeller: APC 5.7 x 3" (Order No. AP.405730)Battery: Quantum (Order No. 6641.08)Speed Controller: KAVAN 5A SlowFlyer (Order No. 6483)2x 5-9g Micro-Servos e.g. Hitec HS-55Micro Receiver e.g. Multiplex 4/5 Pico

Each kit features:

! Laser Accu-cut� hand-select SIG AAA grade balsa.

! 3-D CAD engineered for a precise parts fit.

! Quality hardware pack including

! contest rubber,

! plastic propeller,

! lightweight colored tissue,

! lightweight wheels,

! waterslide decals.

! Accurate computer drawn plans.

! Step by Step Building Instructions (English/German).

Scout Wing Span: 762 mmOrder No. HRR101

Piper J-3 Cub Wing Span: 902 mmOrder No. HRR103

Fokker D-VII Wing Span: 610 mmOrder No. HRR105

Gee Bee R2 Wing Span: 635 mmOrder No. HRR107

Fairchild Wing Span: 762 mmOrder No. HRR102

Ryan ST Wing Span: 762 mmOrder No. HRR104

P-51 Mustang Wing Span: 762 mmOrder No. HRR106

Beech Bonanza Wing Span: 762 mmOrder No. HRR108

88 www.kavanrc.com

HERR E

NG

INEERIN

G

Super Cub Wing Span: 762 mmOrder No. HRR109

Cessna Bird Dog Wing Span: 762 mmOrder No. HRR110

Pitts Special Wing Span: 610 mmOrder No. HRR111

F4U-1 Corsair Wing Span: 762 mmOrder No. HRR113

AT-6 Texan Wing Span: 762 mmOrder No. HRR114

Stearman PT-17 Wing Span: 711 mmOrder No. HRR116

Piper J-3 Cub Wing Span: 457 mmOrder No. HRR201

Taylorcraft Wing Span: 457 mmOrder No. HRR202

Aeronca Champ Wing Span: 457 mmOrder No. HRR203

Piper Tri Pacer Wing Span: 457 mmOrder No. HRR204

Cessna 180 Wing Span: 457 mmOrder No. HRR205

Free Flight Rubber Powered Airplanes BIY

Helio Courier Wing Span: 762 mmOrder No. HRR112

89www.kavanrc.com

SIG

- F/F

(Fre

e Flig

ht) A

irpl

anes

MINI-MAXER F/F BIYDesigned by George Perryman, veteran free flight designer andcompetitor. Add a pop-up tail de-thermalizer (not included withkit) to keep this little airplane from going cloud hopping!

Wingspan: 584 mmLength: 660 mm

Order No. SIGFF24

SIG CUB F/F BIYFAI flyer Larry Conover designed this to be a simple, but capable,"advanced trainer" for modelers learning the ins and outs of trimminga free flight model. Capable of long high flights; limited only by thedeveloping flier's knowledge.

Wingspan: 597 mmLength: 578 mmWeight: 28 g

Order No. SIGFF1

AMA CUB F/F BIYUsed since 1968 in beginner's promotions around the world. Very easy tobuild, yet can turn in some amazing flights. Wing and tail surfaces areconstructed on pre-printed covering material, everything is included except theglue. When ordered in lots of 1,000 or more, the wing covering material can bepre-print with your own advertising message.

Wingspan: 318 mm

Order No. SIGFF5

AMA RACER F/F BIYSimilar to the legendary AMA CUB, only bigger and with an adjustablewing position for more exact flight trimming. Very easy to build, yet turnsin amazing flights. Wing and tail surfaces are constructed on pre-printedcovering material, everything is included except the glue.

Wingspan: 457 mm

Order No. SIGFF4

See SIG Introduction, page 82 or www.sigmfg.com for more details.

90 www.kavanrc.com

SIG

- R/C

Airpl

anes

Order No. SIGRC62

Riser 100 Sailplane BIY

The SIG Riser 100 is an excellent choice for the newcomerwanting to get started in R/C soaring, or for the seasonedglider pilot desiring a relaxing, easy to build floater. Themodified Eppler 205 airfoil and large wing area gives you theability to fly in nearly any weather. Providing great hang timein light lift conditions, it also has respectable penetrationwhen the wind comes up. Easy to transport two piece wing.Conventional balsa construction with Lite Plywood fuselage.Includes complete hardware package.

SpecificationsWingspan: 2540 mmWing Area: 64.5 dm2

Wing Loading: 18 - 20 g/ dm2

Fuselage Length: 1308 mmFlying Weight: 1275 - 1389 gRadio Required: 2 Channels, 2 Servos or 3 Channels, 3 ServosRiser 100 Sailplane BIY Order No. SIGRC62E-Flight Conversion kit Order No. SIGKAV062Includes: Bulkheads, screws, detailed instruction and plan.

Riser Sailplane BIY

Designed for the novice and seasoned sport flyer. The SIG Riserfeatures a strong, lightweight, easy to build conventional balsaconstruction airframe. Flat bottom airfoil for great lift. Room forstandard size servos, build as either two channel (rudder/elevator) orthree channel (rudder/elevator/spoiler). Includes complete hardwarepackage. Launch using a standard high start, winch or optional SIGPower Pod with (.049) 0.8 cm³ glow engine. Convert to electric flightwith Order No. SIGKAV052.

SpecificationsWingspan: 2000 mmWing Area: 40 dm2


Length: 1054 mmFlying Weight: 680 - 800 gRadio Required: 2 Channels, 2 Servos or

3 Channels, 3 ServosRiser Sailplane BIY Order No. SIGRC52E-Flight Conversion kit Order No. SIGKAV052Includes: Bulkheads, screws, detailed instruction and plan.

Order No. SIGRC52

91www.kavanrc.com

SIG

- R/C

Airpl

anesGlassair 400 Glider ARF

Glassair 400, a lightweight 2-meter class sailplane to ride thermals all day long. Power with a0.8 - 1.0 cm³ glow engine or 400-size electric motor. Economically priced, fiberglass fuselage,90% preassembled, builds fast with the fully illustrated instruction manual to guide youthrough either glow or electric operation. English only Instruction.

Specifications

Wingspan: 1850 mmWing Area: 29.3 dm²Length: 899 mmFlying Weight: 625 g (Glow)Radio Required: 2-3 Channels, Standard ServosEngine Required: (.049-.061) 0.8 - 1.0 cm³ 2-Stroke Glow;

400-size motor Electric

Glassair 400 Glider ARF, Blue Order No. GLS400BGlassair 400 Glider ARF, Red Order No. GLS400R

SeaLane FloatPlane BIYTaxi gently away from the dock and head for open water. Increase power andwatch the water spray behind you as the hull lifts smoothly off the water.Gentle, graceful, responsively solid. Then turn-it-on; loops, rolls, even invertedflight! You would never think this was a floatplane. Settle back for a smoothtouchdown into the sunset and taxi back to the dock with solid, positivecontrol, even in crosswinds.

The SeaLane features a one-piece, removable wing, allowing easy access to allyour radio gear. The high mounted forward facing engine pylon keeps yourengine high and dry. While the SeaLane is no landlubber, SIG includes optionalinstructions showing the installation of a fixed gear and tail dragger landinggear. Simply add the main and tail wheel assemblies (not included), detach thetip floats and burn up the skies at your local flying field. The SeaLane is theperfect choice for your first-time seaplane.

SeaLane builds quickly with precision laser cut wood parts; full size rolled plansand illustrated construction manual leaving nothing to the imagination, even forthe novice builder. Includes quality hardware package.

Specifications

Wingspan: 1537 mmWing Area: 43.5 dm²Fuselage Length: 1610 mmFlying Weight: 2720 - 3175 gRadio Required: 4 Channels, 4 Standard ServosEngine Required: (.40-.46) 6.5 - 7.5 cm³ 2-Stroke Glow;

(.40-.50) 6.5 - 8.2 cm³ 4-Stroke Glow

SeaLane FloatPlane BIY Order No. SIGRC85

Order No. SIGRC85

Order No. GLS400B

92 www.kavanrc.com

SIG

- R/C

Airpl

anes

Kadet LT-40 (BIY and ARF)

Thousands of fledgling pilots have earned their wings learning to fly with the Kadet LT-40.With its large wing area and light weight, the Kadet LT-40 ARF flies slow, giving the

fledgling pilot ample time to think and react to what the airplane is doing. BIY versionfeatures laser cut parts and simple to build Lite Ply fuselage. Includes, decal, hardware,

spinner, wheels and fuel tank.

Specifications for BIYWingspan: 1778 mmWing Area: 58.1 dm²Wing Loading: 43 - 47 g/ dm²Fuselage Length: 1422 mmAirfoil: Clark YFlying Weight: 2500 - 2720 gRadio Required: 4 Channels, 4 ServosEngine Required: (.30-.40) 4.9 - 6.5 cm³ 2-Stroke Glow

(.40-.50) 6.5 - 8.2 cm³ 4-Stroke GlowKadet LT-40 BIY Order No. SIGRC67

Specifications for ARFEngine Required: (.40-.45) 6.5 - 7.5 cm³ 2-Stroke Glow

(.40-.50) 6.5 - 8.2 cm³ 4-Stroke GlowKadet LT-40 ARF Order No. SIGRC67ARF

Order No. SIGRC67

Kadet LT-25 BIY

For decades, the SIG Kadet's have been the R/C trainers of choice at many clubfields. The newest in the Kadet series, LT-25 is a downsized version of thepopular SIG Kadet LT-40. The LT-25 inherits the same gentle flyingcharacteristics and light wing loading which allows it to fly slow enough togive the student pilot time to think and react. It has the same "hands off"stability on all axes. If the student pilot gets disorientated, simply let go of the"sticks" and the LT-25 will recover and return to level flight. For simplicity andminimium flying weight, the LT-25 has a tail dragger landing gear. With a wide-stance main gear and shallow angle of attack on the ground, the LT-25 takes offand lands just as easily as most tricycle gear airplanes.

LT-25 builds quickly with precision laser cut wood parts. Includes qualityhardware package with aluminum main landing gear.

Specifications

Wingspan: 1600 mmWing Area: 46.7 dm²Weight: 1810 - 1930 gRadio Required: 4 ChannelsEngine Required: (.25-.32) 4 - 5.3 cm³ 2-Stroke Glow;

(.20-.26) 3.3 - 4 cm³ 4-Stroke Glow

Kadet LT-25 BIY Order No. SIGRC74

Order No. SIGRC74

93www.kavanrc.com

SIG

- R/C

Airpl

anesKadet Senior (BIY and ARF)

First attempts at R/C flying should be with an inherently stable modelthat flies slow enough to give the student pilot time to think and react.The SIG Kadet Senior is the result of over 50 years of experiencehelping beginner modelers do just that. With a high wing, generouswing area and light wing loading, the SIG Kadet Senior also makes agreat flying platform for camera, simulated bomb drops, banner orglider towing.Specifications for BIYWingspan: 1981 mmWing Area: 74.2 dm²Wing Loading: 37 g/ dm²Flying Weight: 2720 gRadio Required: 3 Channels, 3 ServosEngine Required: (.29-.40) 4.8 - 6.5 cm³ 2-Stroke Glow;

(.35-.45) 5.7 - 7.4 cm³ 4-Stroke GlowKadet Senior BIY Order No. SIGRC58

Specifications for ARFWingspan: 2032 mmWing Area: 76.1 dm²Fuselage Length: 1314 mmFlying Weight: 2720 - 2950 gRadio Required: 4 Channels, 5 ServosEngine Required: (.40-.45) 6.5 - 7.5 cm³ 2-Stroke Glow;

(.40-.50) 6.5 - 8.7 cm³ 4-Stroke GlowKadet Senior ARF, Trans. Blue Order No. SIGRC58ARFBKadet Senior ARF, Trans. Red Order No. SIGRC58ARFR


Kadet Seniorita BIY

This compact version of the legendary Kadet Senior is designed formodelers with a small car or workshop. The Kadet Seniorita featuresthe same super light wing loading and forgiving flight characteristicsof the larger Kadet Senior, only in a smaller package. Conventionalbalsa and plywood construction. Quality hardware package includingsteerable nose gear, engine mount, etc.

Specifications

Wingspan: 1600 mmWing Area: 48 dm²Weight: 1700 gLength: 1270 mmRadio Required: 3 Channels (elevator, rudder, throttle)Engine Required: (.15-.25) 2.5 - 4 cm³ 2-Stroke Glow;

(.21-.35) 3.4 - 5.7 cm³ 4-Stroke Glow

Kadet Seniorita BIY Order No. SIGRC60

Order No. SIGRC60

94 www.kavanrc.com

SIG

- R/C

Airpl

anes

Order No. SIGRC44

Four Star 40 (BIY and ARF)

You've done great with your first trainer. Now is the time to step upand start having some real fun. SIG's Four Star 40 has been the"second airplane" of choice for thousands of modelers since itsintroduction in 1989. With it's low semi-symmetrical wing, light wingloading, the Four Star 40 takes you to the next level, with all thefree-style aerobatics and whoop-dee-doos your thumbs can conjureup. BIY version features laser cut parts and simple to build lite-plywood fuselage. Like all SIG BIY and ARF airplanes only qualitybalsa and plywoods are used. Four Star 40 ARF is hand coveredusing Oracover® film. Complete hardware package includes decals,aluminum landing gear, etc.

Specifications

Wingspan: 1518 mmWing Area: 39 dm²Wing Loading: 55 g/ dm²Length: 1194 mmFlying Weight: 2150 gRadio Required: 4 Channels, 4 ServosEngine Required: (.40-.45) 6.5 - 7.5 cm³ 2-Stroke Glow;

(.40-.50) 6.5 - 8.2 cm³ 4-Stroke Glow

Four Star 40 BIY Order No. SIGRC44Four Star 40 ARF, Red Order No. SIGRC44ARFRFour Star 40 ARF, Yellow Order No. SIGRC44ARFY

Order No. SIGRC44ARFY

95www.kavanrc.com

SIG

- R/C

Airpl

anesFour Star 60 (BIY and ARF)

A simple blend of classic lines, ultra-simple construction and outstandingflight performance has been the hallmark of the Four Star series. The FourStar series are easy to fly and make an ideal choice for your first low wingairplane. Intermediate and advanced flyers will love the maneuverabilityand smooth handling of the Four Star 60. BIY version features laser cutparts and simple to build Lite Ply fuselage. Includes, decals, aluminumlanding gear, hardware, pushrods, etc.

SpecificationsWingspan: 1803 mmWing Area: 60.3 dm²Wing Loading: 53.5 - 61.1 g/ dm²Fuselage Length: 1447 mmFlying Weight: 3200 - 3600 gEngine Required: (.60-.75) 10.0 - 12.3 cm³ 2-Stroke Glow

(.65-.90) 10.7 - 14.7 cm³ 4-Stroke GlowRadio Required Four Star 60 BIY: 4 Channels, 4 ServosRadio Required Four Star 60 ARF: 4 Channels, 5 Servos

Four Star 60 BIY Order No. SIGRC73Four Star 60 ARF, Red Order No. SIGRC73ARFRFour Star 60 ARF, Yellow Order No. SIGRC73ARFY

Order No. SIGRC73ARFY

Four Star 120 BIY

Just like the Four Star 40 and the Four Star 60, the Four Star 120 has a nearperfect blend of simple construction, classic looks, and outstanding flightperformance. Easy to build; lite-plywood fuselage construction, fast-building wing,pre-shaped balsa leading edges. With wing loading like a trainer, the Four Star 120is easy to fly yet will perform all the free-style aerobatics your thumbs can keep upwith. The impressive size of the Four Star 120 (IMAA legal) makes for smoothaerobatics and ultra-slow landings. Quality hardware pack includes landing gear,canopy, engine mount, pushrods, hinges, decal sheet, etc.

Specifications

Wingspan: 2057 mmWing Area: 77.7 dm²Weight: 4760 - 5440 gLength: 1651 mmRadio Required: 4 Channels, 5 Servos

(2 aileron, 1 elevator, 1 rudder, 1 throttle)Engine Required: (.90-1.20) 15 - 20 cm³ 2-Stroke Glow;

(1.20-1.60) 20 - 26 cm³ 4-Stroke Glow

Four Star 120 BIY Order No. SIGRC65

Order No. SIGRC65

96 www.kavanrc.com

SIG

- R/C

Airpl

anes Hog-Bipe BIY

Since 1957, thousands of modelers have been delighted with the slowflying, yet aerobatic flight performance of the original SIG Astro-Hog. Asthe old saying goes, "Nothing flies like a Hog!". Now you can have thesame easy flying aerobatic performance in a sport biplane design- the SIGHog-Bipe. The Hog-Bipe performs every maneuver in the book, yet fliesslow enough to let you enjoy it. Wing: fully-symmetrical, NACA airfoil. Fastbuilding with laser cut parts and simple to build lite-plywood fuselage.Quality hardware pack includes aluminum landing gear and cabane struts,molded ABS headrest and wheel pants, engine mount, pushrods, etc.

Specifications

Top Wingspan: 1384 mmBottom Wingspan: 1315 mmTotal Wing Area: 62.3 dm²Weight: 3175 - 3630 gRadio Required: 4 ChannelsEngine Required: (.60-.65) 9.8 - 10.7 cm³ 2-Stroke Glow;

(.65-.90) 10.7 - 15 cm³ 4-Stroke Glow

Hog-Bipe BIY Order No. SIGRC69

Smith Miniplane BIY

Historically, the full-scale Smith Miniplane is one of the designs that helped start themodern homebuilding era. Originally designed and built in 1957 by Frank Smith ofFullerton, California, the Smith Miniplane was an early example of engineering withthe amateur homebuilder and weekend pilot in mind. It could be constructed withtools easily within reach of the average craftsman. Powered by a 100 hp Lycoming,the Smith Miniplane cruised at 190 kph and climbed at a fantastic 760 m per minute.In 1974, Glen Sigafoose, then President of Sig Mfg. Co., acquired a complete SmithMiniplane to use for aerobatic practice. Glen's beautiful red, white, and black aircraftwas the inspiration for this semi-scale model.

Like the full-scale model, it's smooth and stable, yet provides plenty of excitement inthe aerobatic department. An outstanding roll rate makes for dizzying snap rolls.Conventional balsa and plywood construction, semi-symmetrical wing. Includesmolded ABS cowling, headrest and wheel pants, factory formed landing gear andtailwheel wires, authentic decals and quality hardware pack.

Specifications

Wingspan: 1120 mmWing Area: 42 dm²Weight: 2380 gLength: 1040 mmRadio Required: 4 ChannelsEngine Required: (.40-.45) 6.5 - 7.5 cm³ 2-Stroke Glow

Smith Miniplane BIY Order No. SIGRC38

Order No. SIGRC69

Order No. SIGRC38

97www.kavanrc.com

SIG

- R/C

Airpl

anes

Order No. SIGRC66

Wonder BIY

If you like sweaty palms, a racing heart and unbelievable fastflying, then the SIG Wonder is the airplane for you. The SIGWonder is best described as a very fast, go-where-you-point-it,turn-it-quick-or-it'll-be-gone plane designed for hot-fingered R/Cpilots. Landings are easy due to the thick symmetrical airfoiland light wing loading. Easy to build balsa and plywoodconstruction.

SpecificationsWingspan: 952 mmWing Area: 21.8 dm2


Flying Weight: 740 - 1070 gRadio Required: 2 Channels, 2 Servos or

3 Channels, 3 ServosEngine Required: (.09-.19) 1.5 to 3.0 cm³ 2-Stroke Glow

Wonder BIY Order No. SIGRC66

Somethin' Extra (BIY and ARF)

The Somethin' Extra has it all: good looks, incredible performance and unbelievably easy tobuild. It's thick airfoil and very light wing loading allows almost unlimited flying maneuvers,

while these same features, insure stable, slow speed handling. The Somethin' Extra uses aunique removable wing feature, which allows for easy building, transport and storage. BIY is

laser cut balsa and plywood construction. Includes aluminum landing gear, hardware, andplastic wheel pants.

Common SpecificationsWingspan: 1308 mmWing Area: 39.6 dm²Wing Loading: 48 - 54 g/dm²Fuselage Length: 1225 mmRadio Required: 4 Channels, 5 ServosEngine Required: (.40-.46) 6.5 -7.5 cm³ 2-Stroke Glow

(.56-.65) 9.2 -10.7 cm³ 4-Stroke Glow

Somethin� Extra ARFIncludes factory painted Fiberglass Wheel Pants

Somethin' Extra BIY Order No. SIGRC76Somethin' Extra ARF, Red/White Order No. SIGRC76ARFRSomethin' Extra ARF, Violet/White Order No. SIGRC76ARFV

Order No. SIGRC76ARFV

98 www.kavanrc.com

SIG

- R/C

Airpl

anes

Order No. SIGRC80ARFG

Rascal Nitro ARFFor the ultimate "golden age" experience with a 1 cm³ glow engine- SIG RascalNitro ARF. Hand assembled from the finest balsa and plywood and thenexpertly covered using Oracover® polyester film in a classic two-color trimscheme of white with either transparent blue or red. Includes all majorhardware such as fuel tank, motor mount, pre-painted matching wheel pants,etc.

SpecificationsWingspan: 1245 mmWing Area: 20.9 dm²Length: 82.5 mmFlying Weight: 18-20 oz (510 - 570 g)Radio Required: 3 Channels, 3 Servos

Engine Recommended: Norvel AME .061 (1.0 cm³) R/C Glow

Norvel AME .061 R/C Engine Order No. NVLA6RRascal Nitro ARF, Trans. Blue Order No. SIGRC86ARFBRascal Nitro ARF, Trans. Red Order No. SIGRC86ARFR

Order No. SIGRC86ARFR

Rascal BIYNow and then an airplane comes along with such classic graceful lines that it has an almostmagical effect on pilots. A perfect combination of form and function. The SIG Rascal is that kindof design, right out of the early days of full-scale and model aviation.

Easy to build, laser cut parts, conventional balsa and plywood construction. Power with either ageared 400-size motor or a 0.8 to 1.15 cm³ glow engine. The plans and instruction manual coverboth installations in detail. Includes hardware, molded wheel pants, color instrument panel anddecals.

Rascal is also available in ARF versions; for glow power order Rascal Nitro ARF, for electric powerorder Rascal Electric ARF.

Accessories required for electric power, SIGRC80:Williams Bros. Golden Age Wheels, Ø 47 mm Order No. WBR15000Swift 400, 6V Motor with K2 Gold connector Order No. 6597400 Motor Mount Order No. MXACC314400 Gearbox w/3 Pinions & Dual ball bearings Order No. MXACC347Speed Controller: KAVAN 11A w/K2 Gold connectors Order No. 6485Ni-Cd pack: 7x 600AE mAh w/K2 Gold connector Order No. 6439.078x6 APC Thin Electric Propeller Order No. AP.308060

Radio control set: 3 Channels, Micro receiver, 2 micro servos (9 g or less)

SpecificationsWingspan: 1245 mmWing Area: 20.9 dm²Flying Weight: (Glow) 510 - 570 g; (Electric) 623 - 680 gEngine Required: (.049-.07) 0.8 - 1.15 cm³ Glow;

400-size Motor w/Gearbox Electric

Rascal BIY Order No. SIGRC80

99www.kavanrc.com

SIG

- R/C

Airpl

anes

Order No. SIGRC83ARFR

Rascal Forty ARF

Same great design as the Rascal but the larger Rascal Forty ARF addsfull span ailerons for outstanding aerobatics. Classic looks with thedistinctive elliptical wing and tail group. The two-piece wing makes foreasy transport. Includes complete hardware package with fuel tank,wheels, spinner, aluminum landing gear, painted fiberglass wheel pants,etc.

SpecificationsWingspan: 1841 mmWing Area: 47 dm²Fuselage Length: 1314 mmFlying Weight: 2300 - 2500 gRadio Required: 4 Channels, 5 ServosEngine Required: (.40-.45) 6.5 - 7.5 cm³ 2-Stroke Glow;

(.40-.56) 6.5 - 9.0 cm³ 4-Stroke Glow

Rascal Forty ARF, Trans. Blue Order No. SIGRC83ARFBRascal Forty ARF, Trans. Red Order No. SIGRC83ARFR


Rascal 110 ARF

Like the others, Rascal 110 ARF is easy to fly, yet responsive.The scale-like lines are decidedly from the "golden age" ofaviation, making the airplane look so realistic it could easily bemistaken for a full size airplane from the 1930's. Two-piece wingand functional wing struts for easy transport. IMAA legal.Includes complete hardware, fiberglass cowl, matching wheelpants, aluminum landing gear and scale-like tailwheel assembly.

Specifications

Wingspan: 2794 mmWing Area: 98.2 dm²Fuselage Length: 1924 mmFlying Weight: 5000 - 6000 gWing Loading: 51 - 60 g/ dm²Radio Required: 4 channel with 5 servosEngine Required: (1.2-1.5) 19.7 - 24.6 cm³ 2-Stroke,

(1.2-1.8) 19.7 - 29.5 cm³ 4-Stroke;(1.2-1.5) 22 - 25 cm³ Gasoline

Rascal 110 ARF, Trans. Blue Order No. SIGRC84ARFBRascal 110 ARF, Trans. Red Order No. SIGRC84ARFR

100 www.kavanrc.com

SIG

- R/C

Airpl

anes Sun Dancer ARF

The ability to reach for the skies and dance with the sun has long been thevenue of highly aerobatic biplanes. No ordinary pair of wings, the SIG SunDancer is craftsman-built using only hand selected balsa and plywood. Thefinish is pure beauty with a dazzling trim scheme of orange, red and yellowOracover® film sure to brighten up even the darkest day. Sun Dancer is morethan a pretty face. It's pure aerobatic muscle. With a 52 cm³ gas engine and acompetition radio in control, the Sun Dancer could re-write the book onaerobatics. Rock solid knife-edge, loops big and small, and snap rolls all theway to eternity. Includes painted fiberglass wheel pants and cowling, pull-pullrudder assembly, twin elevator and aileron mounts, scale tailwheel assembly,dual landing gear, 700 ml gasoline-ready fuel tank and comprehensivehardware package.

Break out your sunglasses, lather up the suntan lotion, and come party in thesun.

Specifications

Wingspan: 1831 mmWing Area: 109.80 dm²Length: 1676 mmWeight: 7250 to 8150 gRadio Required: 4 Channels, 8 ServosEngine Required: (2.4-3.2) 40 to 52 cm³ Gas

Sun Dancer ARF Order No. SIGRC89ARF3D Mayhem ARFOver the past several years, aerobatics has taken on a completely newdimension. 3-D flying has grabbed hold and more airplanes are dancing in theair than ever before. Now you too can perform these totally X-treme maneuverswith the SIG 3D Mayhem ARF. This is not just your average aerobatic flyer. The3D Mayhem incorporates all the engineering required to bring 3-D aerobatics toyour field. Generous wing area, lightweight construction and outrageously hugecontrol surfaces with gargantuan throws; all limited only by your skills. As withall SIG ARFs, only the finest balsa and plywood is used and then covered withOracover® polyester film. Complete hardware package includes a pull-pull rudderassembly, twin aileron servo mounts, short-coupled elevator mount, duralaluminum landing gear, scale tail wheel assembly and painted fiberglasscowling and wheel pants.

SpecificationsWingspan: 1830 mmWing Area: 75.3 dm²Length: 1500 mmFlying Weight: 3090 gRadio Required: 4 Channels, 5 ServosEngine Required: (.61-.91) 10 - 15 cm³ 2-Stroke Glow;

(.70-.91) 11.5 - 15 cm³ 4-Stroke Glow

3D Mayhem ARF Order No. SIGRC79ARF



101www.kavanrc.com

SIG

- R/C

Airpl

anes


Cap 231EX ARF

The Cap 231EX is capable of every thing imaginable and then some inthe air. Includes a fully air foiled vertical fin and horizontal stabilizer,complete hardware package with fiberglass wheel pants and cowl,removable painted canopy, aluminum landing gear, scale tailwheelassembly, and 470 cc fuel tank. IMAA legal.

SpecificationsWingspan: 1854 mmWing Area: 62.1 dm²Fuselage Length: 1663 mmFlying Weight: 4750 - 5000 gRadio Required: 4 Channels, 6 ServosEngine Required: (1.2-1.5) 21 - 24.6 cm³ 2-Stroke Glow;

(1.2-1.5) 21 - 24.6 cm³ 4-Stroke GlowCap 231EX ARF Order No. SIGRC77ARF


Extra 300XS ARF

Conquering the world in full size aerobatics, Extra 300airplanes are the choice of many serious competitors. SIG'sExtra 300XS comes with double beveled elevator and rudderhinge lines, allowing full 3-D surface movements on demand.Includes decal, hardware package with pre-painted fiberglasswheel pants and cowl, removable painted canopy, aluminumlanding gear, wheels, and 470 cc fuel tank. IMAA legal.

SpecificationsWingspan: 1870 mmWing Area: 63.9 dm²Fuselage Length: 1727 mmFlying Weight: 5400 - 5900 gRadio Required: 4 Channels, 6 ServosEngine Required: (1.2-1.5) 19.7 - 24.6 cm³ 2-Stroke Glow

(1.2-1.8) 19.7 - 29.5 cm³ 4-Stroke Glow(2.5) 40 cm³ Gasoline

Extra 300XS ARF Order No. SIGRC78ARF

102 www.kavanrc.com

SIG

- R/C

Airpl

anes

Order No. SIGRC82

1/5 Scale Piper J-3 Cub BIY

Added to the BIY line of kits for SIG's 50 year Anniversary. Scaledetails including a functional side door and window, dummyengine cowls with "eyebrow" air scoops, scale-like wire landinggear, a fully detailed instrument panel and even the realistic"bird's eye-view" window on top of the cabin. Includes hardware,decal sheet, fiberglass molded cowling, tail wheel assembly, etc.Laser cut wood parts.

SpecificationsWingspan: 2146 mmWing Area: 61.1 dm²Fuselage Length: 1403 mmFlying Weight: 3200 gRadio Required: 4 Channels, 5 ServosEngine Required: (.40-.45) 6.5 - 7.5 cm³ 2-Stroke Glow

(.45-.60) 7.5 - 10.7 cm³ 4-Stroke Glow1/5 Scale Piper J-3 Cub BIY Order No. SIGRC82


The light wing loading, hands-off stability, and forgivingflight characteristics that made the Cub so popular with full-scale pilots are also ideal for model builders. The Cub designis nearly perfect for R/C flying - making a beautiful scalemodel that is easy to fly. This is the all-time classic Cub kitdesigned by Chuck Hollinger, and originally kitted byBerkeley over 30 years ago. Built-up balsa construction,strong one-piece wing. Includes hardware, spruce wingstruts, molded ABS engine cowling, formed wire landinggear, decals, etc. Dummy engine, laminated prop, andopening door on the Cub pictured are not included in the kit.Modeler Charles Viosca added these extra scale details to hisCub.

Specifications

Wingspan: 1800 mmWing Area: 45.2 dm²Radio Required: 4 ChannelsEngine Required: (.25-.40) 4 - 6.5 cm³ 2-Stroke;

(.40-.45) 6.5- 7.5 cm³ 4-Stroke

1/6 Scale Piper J-3 Cub BIY Order No. SIGRC3

Order No. SIGRC3

103www.kavanrc.com

SIG

- R/C

Airpl

anes


Made of the finest SIG AAA grade balsa and plywood,this precision die-cut model goes together fast. Moldeddetail parts such as engine cowling, dummy enginecylinders, bungee covers and air cleaner add to the scalepresence. Sale-like leaf-spring tail wheel and formed wiremain gear assemblies that have set the standard foryears. Two-piece wing. Includes complete hardware andauthentic decals.

SpecificationsWingspan: 2667 mmWing Area: 103.22 dm²Fuselage Length: 1700 mmFlying Weight: 6400 - 7300 gRadio Required: 4 Channels with

Heavy Duty ServosEngine Required: (.60-.90) 10 - 15 cm³ 2-Stroke

(.90-1.5) 15 - 25 cm³ 4-Stroke1/4 Scale Piper J-3 Cub Order No. SIGRC48

Order No. SIGRC48

1/4 Scale Clipped Wing Cub BIYIn 1969 Hazel Sig, President of SIG Mfg. Co., rebuilt a standard 1941 Piper J-3Cub for aerobatic flying. To improve the airplane's aerobatic performance, 1 mwas cut off each wing panel, and the engine was reworked to produce 75 hpinstead of its normal 65 hp. The entire framework of the Cub was rebuilt and adazzling sunburst paint job was applied with SIG Supercoat Dope. Over theyears Hazel progressed to more powerful airplanes for her aerobatics, but noneever captured the affections of modelers worldwide as has the Clipped WingCub.

In the air, the 1/4-scale version of Hazel's Cub is as smooth, stable, andresponsive as the big one. Basic aerobatic maneuvers such as loops, rolls,spins, and snaps are easy. Easy-to-Build balsa, plywood, & spruce constructionkit. Strong one-piece wing. Complete hardware pack includes molded ABSengine cowling, scale dummy engine and bungee covers & air cleaner, factoryformed main landing gear wires and scale-like leaf-spring steerable tailwheelassembly, decals, etc.

SpecificationsWingspan: 2185 mmWing Area: 83.9 dm²Weight: 6350 - 6800 gLength: 1700 mmRadio Required: 4 ChannelsEngine Required: (.60-.90) 9.8 - 15 cm³ 2-Stroke;

(.90-1.60) 15- 26 cm³ 4-Stroke

1/4 Scale Clipped Wing Cub BIY Order No. SIGRC47

Order No. SIGRC47

Maxey Hester, Andrea Martin

104 www.kavanrc.com

SIG

- R/C

Airpl

anes Spacewalker 1/3-Scale BIY

Although it looks like it's straight out of the 1930's, don't bother looking upthis one in your aviation history books. The Spacewalker was designed byJesse Anglin of Hendersonville, North Carolina and first flew in 1986! Despitethe fact it is a relatively new design, the Spacewalker manages to capture allthe spirit of Aviation's Golden Age.

This 1/3-scale model of Jesse's Spacewalker retains all of the charm of hisbeautiful homebuilt. Plans for the full-size aircraft were scaled down for theultimate in scale accuracy. Construction is easy with pre-formed fiberglassparts such as cowling, wingtips, and wheel pants and conventional balsa andplywood construction.

In the air, Spacewalker is certain to please. The big wing, thick airfoil, andlong tail moment make for stable approaches and soft, slow landings. Butbefore coming back to earth, it can do enough loops, rolls, snaps, and spinsto make any sport pilot happy. Here's a scale model that almost anyone canhandle! 3-Piece wing with aluminum wing joiners. Includes hardware, scaleleaf-spring tailwheel assembly, authentic decals, etc.

SpecificationsWingspan: 2640 mmWing Area: 116.1 dm²Weight: 9070 gLength: 1828 mmRadio Required: 4 Channels, 5 Servos

(2 aileron, 1 elevator, 1 rudder, 1 throttle)Engine Required: (1.5-2.4) 25 - 40 cm³ 2-Stroke Glow;

(1.8-3.0) 30 - 50 cm³ 4-Stroke Glow

Spacewalker 1/3-Scale BIY Order No. SIGRC61 Spacewalker II 1/4-Scale BIYAlthough highly popular with the giant-scale crowd, the 1/3-ScaleSpacewalker is simply too large for some modelers. In response SIGbrings you the 1/4-Scale Spacewalker II. Easy-to-build conventionalbalsa and plywood construction with pre-formed ABS cowling,wingtips, and wheel pants. Legal for IMAA and QSAA fly-ins, this 1/4-scale model is made for flying. The thick semi-symetrical airfoil andlong tail moment provide perfect stability and low speed handling. Atfull-throttle, it can do all the aerobatics you dreamed of. Includeshardware, scale leaf-spring tailwheel assembly, decals, etc.

SpecificationsWingspan: 2133 mmWing Area: 71.6 dm²Weight: 5440 gLength: 1530 mmRadio Required: 4 ChannelsEngine Required: (.90-1.20) 15 - 20 cm³ 2-Stroke Glow;

(1.20-1.60) 20 - 26 cm³ 4-Stroke Glow

Spacewalker II 1/4-Scale BIY Order No. SIGRC59

Order No. SIGRC61

Order No. SIGRC59

105www.kavanrc.com

SIG

- C/L

(Con

trol

Lin

e) A

irpl

anesSee SIG Introduction, page 82 or www.sigmfg.com for more details.

Super Chipmunk C/L BIYSemi-Scale C/L Stunt. Conventional built-up balsa contstruction. Follows the lines and color scheme of thefull-size aerobatic Super Chipmunk flown by Skip Volk. The unique lines of the cowl and canopy set themodel apart from the average stunter. It's a proven contest winner.

Wingspan: 1359 mmLength: 990 mmWing Area: 36.8 dm²Weight: 1330 - 1420 gEngine Required: (.29-.40) 4.8 - 6.5 cm³ 2-Stk

Super Chipmunk C/L BIY Order No. SIGCL19

Beechcraft Staggerwing C/L BIY1/2A C/L Profile Scale. Takes off easily, grooves smoothly around the circle and handles effortlessly. Invertedflight, loops and other aerobatic maneuvers are routine with this beauty.

Wingspan: 457 mmEngine Required: (.049 reed valve) 0.8 cm³ 2-Stk

Beechcraft Staggerwing Order No. SIGCL17

Skyray 35 C/L BIYControl Line Profile Stunter. Excellent all purpose design suitable for stunt, combat, sport racing, balloon bust, orgeneral Sunday flying. With a .19 engine it makes a good first C/L trainer. Bolt on a .35 Stunt engine and the Skyray35 will fly the complete AMA stunt pattern.

Wingspan: 1118 mmWing Area: 25.5 dm²Length: 838 mmEngines: (.19-.35) 3.1 - 5.7 cm³ 2-Stk

Skyray 35 C/L BIY Order No. SIGCL25

Skyray C/L BIY1/2A C/L Profile Stunter. SIG's most popular C/L airplane. Designed by 6-time National Champion Mike Gretz, it's an idealfirst-time C/L trainer for the beginner. Detailed instructions cover building, pre-flight, and flying.

Wingspan: 603 mmWing Area: 6.5 dm²Engine Required: (.049 reed valve) 0.8 cm³ 2-Stk

Skyray C/L BIY Order No. SIGCL23

Order No. SIGCL19

Order No. SIGCL17

Order No. SIGCL25

Order No. SIGCL23

106 www.kavanrc.com

SIG

- C/L

(Con

trol

Lin

e) A

irpl

anes Akromaster C/L BIY

Compact C/L Profile Stunter. Easy to build, good beginner's stunt plane. It's thick fully-symetricalwing and short tail moment will let you learn the basics without risking a more expensive full-sizestunter.

Wingspan: 863 mmWing Area: 16.1 dm²Engine Required: (.15-.19) 2.5 - 3.1 cm³ 2-Stk

Akromaster C/L BIY Order No. SIGCL20

Shoestring C/L BIYControl Line Profile Goodyear Racer. With a hot .15 (2.5 cm³), this compact little speedster has broughthome lots of trophies over the years. The Shoestring also makes a durable C/L trainer or sport flier.

Wingspan: 610 mmWing Area: 9 dm²Length: 622 mmEngine Required: (.10-.15) 1.6 - 2.5 cm³ 2-Stk

Shoestring C/L BIY Order No. SIGCL13

Banshee C/L BIYControl Line Profile Goodyear Racer With Flaps. An ideal stunt trainer for up and coming fliers,or an excellent practice airplane for the competition flier.

Wingspan: 1245 mmWing Area: 33 dm²Engine Required: (.29-.40) 4.8 - 6.5 cm³ 2-Stk

Banshee C/L BIY Order No. SIGCL11

Twister C/L BIYC/L Profile Stunter With Flaps. An ideal stunt trainer for up and coming fliers, or an excellentpractice airplane for the competition flier.

Wingspan: 1220 mmWing Area: 31.6 dm²Engine Required: (.29-.40) 4.8 - 6.5 cm³ 2-Stk

Twister C/L BIY Order No. SIGCL22

Order No. SIGCL20

Order No. SIGCL13

Order No. SIGCL11

Order No. SIGCL22

107www.kavanrc.com

SIG

- C/L

(Con

trol

Lin

e) A

cces

soriesHeavy Duty Nylon C/L Bellcranks

Molded from self-lubrication nylon for super strength, low friction, and long life. 1/2A Bellcrank is for sportmodels up to (.15) 2.5 cm³ engine size. Includes control horn and mounting screws. 76 mm Bellcrank is for C/Lsport and stunt models from (.15 to .60) 2.5 - 9.8 cm³ engine size. Includes nylon bushing, mounting bolt, nut andwashers. 102 mm Bellcrank is for large stunt models.

1/2A Bellcrank Order No. SIGSH23476 mm Bellcrank Order No. SIGSH480102 mm Bellcrank Order No. SIGSH754

C/L Line ConnectorsPack: 4 pcs.

Small, (15 lb) 6.8 kg test Order No. SIGSH445Medium, (22 lb) 10 kg test Order No. SIGSH444Large, (49 lb) 22 kg test Order No. SIGSH443

Lead Out Wire7-strand stainless steel wire. Use between thebellcrank and the exit point at the wingtip.

1/2A, (.021") .53 mm x 1.2 m Order No. SIGSH446Regular, (.027") .69 mm x 1.8 m Order No. SIGSH447

1/2A Control Line HandleFor planes up to (.074) 1.2 cm³ engine size. Three sets of holes allowvariable control sensitivity. It's simple to adjust elevator neutral usingplastic clamp and self-tapping screw. Includes control handle, Dacron flyingline, and line connectors.

Order No. SIGSH544

1/2A Dacron Flying LineFor control line planes up to(.074) 1.2 cm³ engine size. Pack:18.3 m roll.

Order No. SIGSH440

SIG FuelerPerfect for priming engines and quick filling small fuel tanks. Thegraduated scale (cc and ounces) on the side allows accuratemeasurement of the fuel. Good for C/L combat flying or outdoor F/F,where a precise injection of fuel into a bladder is required. Also great forremoving the leftover fuel from the tank after flying. Includes siliconefuel tubing for quick-connecting to the tank. For glow fuel only; not forgasoline.

SIG Fueler 1/2A (12 cc) Order No. SIGSH722SIG Fueler 2 oz. (60 cc) Order No. SIGSH619SIG Fueler 5 oz. (148 cc) Order No. SIGSH679

Braided Control LinesHigh quality 7-strand braided stainless steel cable with steel clips, endhardware and instructions for assembly. All SIG lines are supplied on aControl Line Reel.

2-Line Cable Order No.

(.012") 0.3 mm x 2x 10.7 m SIGSH453(.012") 0.3 mm x 2x 15.8 m SIGSH454(.012") 0.3 mm x 2x 21.3 m SIGSH455(.015") 0.38 mm x 2x 15.8 m SIGSH456(.015") 0.38 mm x 2x 18.3 m SIGSH457(.015") 0.38 mm x 2x 21.3 m SIGSH458(.018") 0.46 mm x 2x 15.8 m SIGSH459(.018") 0.46 mm x 2x 18.3 m SIGSH460(.018") 0.46 mm x 2x 21.3 m SIGSH461

Replacement Control Line ReelsInjection-molded plastic reel. Generally, Standardfits 2-Line Cables and Large fits 3-Line Cables.

Control Line Reel- Standard Order No. SIGSH441

Control Line Reel- Large Order No. SIGSH745

Note from SIG factory fliers: toprevent kinking control linesduring use, always unroll thelines from the reel and roll themback on. Do not take the linesoff hand-over-hand. See the AMARule Book (USA) for line sizerecommendations for specificsize and type models.

C/L Line Connectors

Order No. SIGSH447

SIG Fueler

Braided Control Line

Order No. SIGSH544

No. SIGSH440

No. SIGSH754No. SIGSH234

No. SIGSH480

Order No. SIGSH745

Documents

SIG - Introduction