Signages

Project : RJ-2 Km 29.000 to Km 73.000 Bekaria-Gogunda Section

ContractorSOMA-BSCPL(JV)

Page 1 of 8 ConsultantSCOTT WILSON INDIA PVT LTD

TRAFFIC SIGNAGES DETAIL

S.no Design Chainage Side Type of Sign Location Purpose Qty Remarks

10 30670-30200 LHS Shoulder 2

18 32780 LHS 1

26 35780 LHS 1

54 37980 LHS Shoulder 1

Installation Location

S-10 B Left Hand Curve







S.no Design Chainage Side Type of Sign Location Purpose Qty RemarksInstallation Location



116 50943 LHS Shoulder Curve 1

163 46450 RHS Shoulder Curve 1





Hard Shoulder

Edge

Left Hand Curve


Hard Shoulder

Edge

Left Hand Curve


Shoulder Edge


Structure Edge


Shoulder Edge


Shoulder Edge


Shoulder Edge




S.no Design Chainage Side Type of Sign Location Purpose Qty RemarksInstallation Location

225 60150 RHS Shoulder 1









Shoulder Edge


Shoulder Edge


Shoulder Edge


Shoulder Edge


Shoulder Edge


Shoulder Edge


Shoulder Edge


Shoulder Edge

ABSTRACT Traffic Signes Project : RJ-2

ContractorSoma-Bscpl(JV)

Page 4 of 8 ConsultantScott Wilson India Pvt Ltd

S.No. Legend Marks No's Remarks

1 23

2 25

3 4

4 5

5 2

6 18

7 20

S-1 (Stop)

S-2 (Give Way)

S-3 (Overtaken Prohibited)

S-7 (Speed Limit)

S-8 (Restriction End

Sign)

S-10 A (Right Hand

Curve)

S-10 B (Left Hand Curve)

STOP

STOP GIVE WAY

80

80





8 33

9 35

10 2

11 14

12 15

13 2

S-11 (Gap in Median)

S-12 (Pedestrian Crossing)

S-15 (Cross Road)

S-16 A (Side Road Right)

S-16 B (Side Road Left)

S-23 (Series Of Bends)





14 2

15 2

16 2

17 7

18 S-33 SAI RIVER 2

19 9

20 35

S-25 A (Filling Station)

S-26 (Hospital)

S-31 (Police Station)

S-32 (Bus Stop)

S-34 (Advance Direction)

S-35 (Direction Signe)

1 Km Ahead

1 Km Ahead

POLICE

ABU ROAD

PINDWADA

KOTDA

KOTARA





21 2

22 35

23 615

24 38

25 34

26 1

27 3

S-37 (Tunnel Ahead)

TA-1 (Cluster of Red

Reflectors)

TA-2 (Delineator With

Recangular Reflector)

TA-3 (Hazard Marker

Left)

TA-4 (Hazard Marker

Right)

S-38 (Route Marker)

Tubular Gantry Mounted Over

head Sign

100 MM

N.H 76

LUCKNOW PORBANDAR UDAIPUR RAJKOTJODHPUR PALANPUR

TOLL BOOTH AHEAD 500MTUNNEL AHEAD 500M

Contractor's RepresentativeSOMA-BSCPL JV

Page 8 of 8 Consultant's RepresentativeScott Wilson India Pvt. Ltd.

Rehabilitation and Upgrading of Bekaria - Gogunda Section (Km 29.000 to Km 73.000) of NH-76 in the State of Rajasthan Contract Package: EW-II (RJ-2)

BOQ Description As Per DPR BOQ Revised Estimate Difference

Item No. Unit Rate Quantity Amount Quantity Amount Quantity Amount %age Diff

BILL NO.9: TRAFFIC SIGNS, MARKINGS AND ROAD APPURTENANCES9.03

0 0 0 0 0

(i) Information sign 800mm x 600mm No. 7500 5 37500 14 105000 -9 -67500 280(ii) Cautionary sign 900 mm triangular No. 6128 150 919200 164 1004992 -14 -85792 109(iii) Mandatory sign 600 mm circular No. 5000 25 125000 11 55000 14 70000 44(iv) Mandatory sign 900 mm octagon No. 7259 5 36295 23 166957 -18 -130662 460

9.04

0 0 0 0 0

(i) 1200 mm x 1800 mm No. 25000 5 125000 35 875000 -30 -750000 700(ii) 1500 mm x 2400 mm No. 50000 5 250000 4 200000 1 50000 80(iii) 1800 mm x 3600 mm No. 75000 5 375000 5 375000 0 0 100

9.05

0 0 0 0 0

MT 93750 3 281250 3 281250 0 0 100

sqm 7500 70 525000 70 525000 0 0 100

9.06 0 0 0 0 0

No. 663 50 33150 35 23205 15 9945 70

No. 2359 5 11795 72 169848 -67 -158053 1440

No. 546 1025 559650 615 335790 410 223860 60

TOTAL AMOUNT BILL NO.9 3278840 4117042 -838202

Providing fixing and erection of retro reflective sign boards out of 2mm thick aluminum sheet including angle iron sign as per drawings and Technical Specification Clause 801.

Providing fixing and erection of retro reflecrtive place identification sign boards made out of 2mm thick aluminum sheet including two angle iron sign posts as per drawings and Technical Specification Clause 801.

supply & fixing tubular gantry mounted overhead/signs as per IRC:67-2001 including descaling,cleaning,priming and painting coats of epoxy paint(other than reflective) back side painted with gray colour,post ground in black and white alternate

(i) Erection of overhead gantry /cantilever structure as per drawing including steel work in trusses,steel tubes,cutting,fixing in position with welding and bolted complete.

(ii) Sign board made out of 2mm thick aluminium sheet,face to be fully covered by fully covered by high intesity grade retro-reflective sheeting fixed on iron frame as per drawing with additional bracing at every 600 mm c/c if any dimension exceeds 1200mm

Providing and fixing road delineators complete as per drawings and Technical Specification Clause 805.

(i) Triangular object marker 300mm equilateral triangle containing cluster of red reflector on frame of ISA 35mm x 35mm x 3mm with fixing on post made of ISA 40mm x 40mm x 5mm at above ground level

(ii) Rectangular hazard marker 900mm x 300mm containing black and yellow zebra strips on frame of ISA 35mm x 35mm x 3mm with fixing on post made of ISA 40mm x 40mm x5mm at 600 above groundlevel

(iii) Roadway Indicator 1000mm high made by 100mm square MS pipe containing rectangular reflector of 120mm x 80mm and alternate white and black bands of 150mm including coverage of reflector by 150mm high wire mesh.

Documents

Signages