4
OWNER’S MANUAL INDOOR / OUTDOOR UNIVERSAL SOUNDBAR BRACKET SM-SBAR2-BKT-UNIV

SM-SBAR2-BKT-UNIV - SnapAV...SM-SBAR2-BKT-UNIV Assembly Manual ADJUSTING THE BRACKET The SM-SBAR2-BKT-UNIV can be adjusted to allow for the desired positioning of a soundbar for depth

  • Upload
    others

  • View
    5

  • Download
    0

Embed Size (px)

Citation preview

Page 1: SM-SBAR2-BKT-UNIV - SnapAV...SM-SBAR2-BKT-UNIV Assembly Manual ADJUSTING THE BRACKET The SM-SBAR2-BKT-UNIV can be adjusted to allow for the desired positioning of a soundbar for depth

OWNER’S MANUAL INDOOR / OUTDOOR UNIVERSAL SOUNDBAR BRACKET

SM-SBAR2-BKT-UNIV

Page 2: SM-SBAR2-BKT-UNIV - SnapAV...SM-SBAR2-BKT-UNIV Assembly Manual ADJUSTING THE BRACKET The SM-SBAR2-BKT-UNIV can be adjusted to allow for the desired positioning of a soundbar for depth

pg.2

SM-SBAR2-BKT-UNIV Assembly Manual

ADJUSTING THE BRACKETThe SM-SBAR2-BKT-UNIV can be adjusted to allow for the desired positioning of a soundbar for depth and height relative to the display. This is achieved by a sliding Tray bracket and by changing the orientation of the Hook bracket.

NOTE: This Strong™ bracket has been designed to work with any Episode® Soundbar products but can be used with any other manufacturers’ models.

DEPTH ADJUSTMENTS

HEIGHT ADJUSTMENTS

Soundbar

DisplayDisplay

Soundbar

Display

Soundbar

Soundbar

Display

Soundbar

DisplayDisplay

Soundbar

Display

Soundbar

0.75in. (0.75 in.)

5.51in. (5.51 in.)

1.79in.

0.75in. (0.75 in.)0.33 in.

Page 3: SM-SBAR2-BKT-UNIV - SnapAV...SM-SBAR2-BKT-UNIV Assembly Manual ADJUSTING THE BRACKET The SM-SBAR2-BKT-UNIV can be adjusted to allow for the desired positioning of a soundbar for depth

pg.3 © 2017 STRONG

SM-SBAR2-BKT-UNIV Assembly Manual

ASSEMBLY STEPS1.Install the Hook Brackets to the rear of the display. Once installed, the brackets will be between the

display and the wall mount.

NOTE: On larger displays only the bottom screw will be used.

2. Insert the Tray brackets into the rear of the Hook Brackets.Keep the set screws loose to allow for adjusting the depth of thesoundbar once installed in step 3.

3. Cut the provided Trim piece (optional) to the width of thesound bar. Use as needed.

4. Secure the Trim piece (optional) to the soundbar via thethe Trim piece.

attached

adhesive on

Page 4: SM-SBAR2-BKT-UNIV - SnapAV...SM-SBAR2-BKT-UNIV Assembly Manual ADJUSTING THE BRACKET The SM-SBAR2-BKT-UNIV can be adjusted to allow for the desired positioning of a soundbar for depth

SM-SBAR2-BKT-UNIV Assembly Manual

5. Attach the Soundbar to the installed Traybrackets and secure with the screws providedwith the Episode™ soundbar.

6. Adjust the soundbar to the desired depth inrelation to the display.

7. Tighten the set screw for each tray bracket. Ifusing a non Episode™ soundbar, verify thatscrews have been provided by the manufacturer.

All Strong™ products have a Lifetime Limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to

repaired under this warranty must be returned to SnapAV or a designated service

LIFETIME LIMITED WARRANTY

Lifetime

For Technical Support : 1.866.838.5052

© 2017 STRONG170106