Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
Smart Implantology Solutions
Index
Part A - Company Introduction – smart solutions
Part B - NanoTecTM Implant Surface
Part C - Internal Hex 2.5 mmd Implant System ATID, DFI, SPI, I.C.E.
Part D - Arrow Press Implants System ARRP, ARRC, ARPB
Part E – Biomaterials Line
Part F - Quality standards
Part G - Training and education center
2
Part A
Company Introduction
Alpha-Bio Tec specializes in development and production of advanced dental solutions, focusing on the field of implants and prosthetics.
Over 25 Years of Experience Worldwide
Established in 1988, Alpha-Bio Tec has been a spearhead in the world of implantology
A research and development team comprised of top experts in the field of dentistry
Developer of the SPI, the first, original Spiral Implant
Compliance with the world’s leading quality system standards
5
Alpha-Bio Tec – Company Structure
Israel
Headquarters
Innovative production facility
Domestic sales and customers support centers
Comprehensive training and educational center
International
Worldwide distribution array
Local sales and service centers in many countries worldwide
6
Alpha-Bio Tec Provides
Smart, simple solutions for a wide variety of surgical procedures
High quality products, developed to meet the needs of all professionals in the field of implantology.
Compliance with strict quality control systems
Proven, long term success
7
Simplicity is the ultimate sophistication
Lifetime Warranty for All Implants
Our Warranty- Your Peace of Mind Alpha-Bio Tec provides its customers
a Lifetime Warranty for its wide range of implants
8
Meeting the Needs Implantology Professionals
Implant Systems
Surgical Instrumentation
Prosthetics Systems
Biomaterials
9 9
10
3 Implant Systems - for All Situations
10
Internal Hex Implant System
Temporary Implants Arrow
Implant System
Trans gingival implants Arrow Press
Implant System
SPI DFI ATID I.C.E. ARRP ARRC ARB ARR
Prosthetics System
Comprehensive solutions for all restoration options:
Cement retained restoration
Screw retained restoration
Esthetic restoration
Zirconium
Overdenture restoration and fixation
AlphaLoc- Overdenture Attachments
Multi Unit for restoring highly angled implants
11
Prosthetics System
One platform for all implant diameters (SPI, I.C.E. DFI, ATID)
Allows the use of any abutment with any implant diameter as well as platform shifting
Wide platform abutments
For a full emergence profile when using 5 mmd or 6 mmd implants
© All rights reserved to Alpha-Bio Tec Ltd. 12
Surgical Instrumentation
Alpha-Bio Tec provides dentists with all the necessary tools for successful surgical procedures, from the basic surgical kit to advanced therapy tools.
13
Surgical kit - One Kit for All Systems
Made from high quality surgical stainless steel
Easy drill identification by color code
Grooved depth marks for better visibility
Diameter range from 2.0mm – 5.8mm.
Fit Alpha-Bio Tec's new recommended drill sequence
Improved twisted geometry for sharper cut
Internal and external irrigation available
14
Surgical Drills
Part B
Advanced Implant Surface
SEM of surface
Implant Surface Process
Sand-blasting to create a macro surface of 20-40 microns.
Double thermal acid etching process to create micro pitting between 1 to 5 microns.
16
Surface Advantages
Increased early bone to implant contact
Increased stability
Shortened healing period
Higher predictability
Retrospective clinical data shows an overall clinical success rate of 98.3% and a 99.6% clinical success rate when using the immediate loading procedure.
17
Excellent Bone-to-Implant Contact
Clinical Comparative Study on Sand Blasted, Acid Etched surface found that:
The histological analysis of the implants showed a good formation of bone, with clear “Contact Osteogenesis”, unequivocal sign of bone formation directly on the surface of the implant.
18
Rocci and Sennerby (2006)
Internal Hex Implant System
Part c
Coronal Part - Internal Hex Implants
Design Features:
• Micro rings
• Bone platform shifting
• Rough surface to the top
• Threads reaching the top of the implant
Advantages:
• Greater surface area
• Less crestal resorption
• Better load distribution
• Decreased crestal stress
20
No. of micro rings may vary
between various implants
and implant diameters.
SPI: Features
Tapered implant
Self drilling
Self tapping
Bone condensing properties
Suitable for all bone types
Excellent primary stability
Easy insertion
22
SPI: Indications
The spiral implant is indicated for all situations, bone types and surgical protocols:
Single missing tooth, partial edentulism, total edentulism
Upper and lower jaws, anterior and posterior regions
One stage and two stage surgical procedures
Closed and open sinus lift procedures
Simultaneous guided bone regeneration and/or splitting crest technique
Immediate implantation and immediate loading
23
SPI: Implant Body and Core
Design Features
• Tapered body
• Tapered core – more pronounced than the threads
• Osteotome like condensing body
Advantages:
• Increased primary stability
• Easy insertion
• Bone condensing
24
SPI: Implant Threads
Design Features
• Double thread design with 2.4 mm step
• Wide thread step
• Threads increase in the apical direction
Advantages:
• Easy insertion
• High primary stability
• Self drilling
• Self tapping
25
2.4 mm
2.4 mm 35º
SPI: Variable Threads Design
26
Thick square
threads Thinner square
threads Sharp V threads
Coronal Middle
Apical
Advantages:
• Easy insertion
• Bone condensing
• Increased primary stability
• Self drilling
• Self tapping
SPI: Variable Threads Design
The coronal threads condense the bone of the apical threads
27
1 2 3
3 2 1
SPI: Apical Part
Design features:
• Sharp and deep threads
• Narrow core
• Apical blades
• Straight apical border
• Condensing taper
Advantages:
• Self drilling
• Self tapping
• Easy insertion
• Helps prevent damage to anatomical structures
• Enables the implant to penetrate small diameter prepared sites
28
SPI: Clinical Advantages of Implant Design
Bone condensing property and very high primary stability.
Self-directing in line of insertion.
Enables changing direction for optimal restorative position.
Enables smaller osteotomy which results in minimal bone loss and reduced trauma.
Enables narrow ridge expansion.
Reduces the risk of damaging neighboring teeth.
Reduces the risk of perforating the lingual or buccal cortex.
29
Implant
Classical Esthetics
Discover True Innovation
31
Indications
Full arch restoration
Single-tooth (including molars) and multiple unit restoration
High primary stability in particular for soft bone type (III and IV)
Upper and lower jaws, anterior and posterior regions
One stage and two stage surgical procedures
Closed and open sinus lift procedures
Simultaneous guided bone regeneration and/or splitting crest technique
Immediate implantation and immediate loading
Excellent stress distribution due to the micro-threads design of the coronal area
32
I.C.E.: Coronal Part
Features: • Back-tapered (from Ø4.2mm diameter) • Micro threads with 4 split starts • Real, deep platform shifting • Split coronal macro thread
Advantages: • Greater BIC and surface area in the
cortical part • Improved stress distribution • Reduces pressure on cortical bone • Less crestal resorption • Long-term esthetic appearance
33
I.C.E.: Implant Body
Features: • Tapered body, both internally and
externally
• Osteotome like condensing body
Advantages:
• Smooth and gentle bone penetration
• High primary stability
• High bone condensation properties
34
I.C.E.: Implant Threads
Features: • Double thread design
with 2mm step • Variable thread design • 60° threads with 0.3 mm
trapezoid-based shape • Constant and deep
threads
Double Thread Design Variable Threads Design
60°
trapezoid-based Shape
Advantages: • Gentle insertion • Fast, controlled bone
penetration • Excellent bone grip • Moderate self-drilling
capability • Reduces pressure on
bone • High primary stability
35
I.C.E.: Apical Part
Features: • Very narrow apical part • Apical blades • Efficient cutting flute • Straight apical border • Sharp, deep apical
threads
Advantages: • Smooth initial penetration • Enables penetration into
prepared sites of smaller diameter (in bone types lll and IV)
• High primary stability (also in immediate implantation)
36
Narrow I.C.E.: 3.7Ø mm
Narrow version in 3.7Ø mm, lengths: 10 mm, 11.5 mm and 13 mm.
Advantages:
Flexibility in choosing diameters for narrow ridges.
Ease of implementation for challenging procedures using minimal surgery.
I.C.E.: Extra Short Implant Available
I.C.E. 6 mm is available in varying diameters: Ø 4.2 mm, Ø 4.65 mm, Ø 5.3 mm
Ultimate solution for posterior mandibular areas Perfect for vertically reduced ridges Ideal for clinical procedures performed in
proximity to the alveolar nerve Enables to prevent sinus lift surgery or
vertical bone augmentation
Sophisticated Design Simple and Easy to Use
DFI: Indications
The DFI implant is indicated for all situations, bone types and surgical protocols:
• Single missing tooth, partial edentulism, total edentulism
• Upper and lower jaws, anterior and posterior regions
• One stage and two stage surgical procedures
• Closed and open sinus lift procedures
• Simultaneous guided bone regeneration and/or splitting crest technique
• Limited vertical bone volume
39
DFI: Implant Body and Core
Design Features
• Slightly Tapered body
• Tapered core – more pronounced than the threads
Advantages:
• Primary stability
• Easy insertion
40
DFI: Implant Threads
Design Features
• Double thread design with 1.2 mm step
• Threads increase in the apical direction
Advantages:
• Easy insertion
• High primary stability
• Self drilling
• Self tapping
41
1.2 mm
1.2 mm
DFI: Variable Threads Design
42
Thick square
threads
Thinner square
threads
Sharp V threads
Coronal
Middle
Apical
Advantages:
• Easy insertion
• Bone condensing
• Increased primary stability
• Self drilling
• Self tapping
DFI: Variable Threads Design
The coronal threads condense the bone of the apical threads
43
1 2 3
3 2 1
DFI: Apical Part
Design features:
• Sharp threads
• Apical blades
• Straight apical border
• Cutting taper
Advantages:
• Self drilling
• Self tapping
• Easy insertion
• Helps prevent damage to anatomical structures
44
DFI: Clinical Advantages of Implant Design
Suitable for all bone types
Easy insertion and better control during placement
Bone condensing property and high primary stability
Self directing in line of insertion
Enables smaller osteotomy which results in minimal bone loss and reduces trauma
45
Cylindrical Implant
ATID: Indications
The ATID implant is indicated for all situations, bone types and surgical protocols:
• Single missing tooth, partial edentulism, total edentulism
• Upper and lower jaws, anterior and posterior regions
• Limited vertical bone volume
• Especially recommended for bone types I & II.
47
ATID: Implant Body and Core
Features:
• Straight wall, cylindrical implant
• Slightly tapered implant bottom
• Straight core
Advantages:
• Excellent for type I&II bone – no bone compression
• Easy insertion
48
ATID: Implant Body and Core
Features:
• Double thread design with 1.2 mm step
Advantages:
• Easy insertion
• Self drilling
• Self tapping
49
1.2 mm
1.2 mm
ATID: Variable Threads Design
Advantages:
• Easy insertion
• Bone condensing
• Increased primary stability
• Self drilling
• Self tapping
50
Thick square
threads Thinner square
threads Sharp V threads
Middle
Coronal
Apical
ATID: Variable Threads Design
The coronal threads condense the bone of the apical threads
51
1 2 3
3 2 1
ATID: Apical Part
features:
• Sharp threads
• Apical blades
• Straight apical border
• Cutting taper
Advantages:
• Self drilling
• Self tapping
• Easy insertion
• Helps prevent damage to anatomical structures
52
ATID: Extra Short Implants Available
Solution for reduced vertical height of bone
53
6 mm
Ø5 mm Ø6 mm
Clinical Advantages of Implant Design
Easy insertion and better control during placement
Excellent for type I & II bone
Suitable for use with limited bone volume, especially in the mandible
Reduces pressure on hard bone
54
Part D
Arrow Press Implant System
Trans-Gingival Implants
Arrow Press Implants Family
Trans-gingival gold colored titanium oxide coating:
• Allows biocompatibility
• Provides Excellent gingival tolerance
• Eliminates the grey shading of the gingival tissue
One piece implant (ARRP)
56
Arrow Press Implants - Body
Compressing threads for Immediate engagement
57
ARRP ARRC
ARRP: Features
Threaded one piece implant with an integrated abutment
Designed for single stage surgical procedure and cement restorations
Available in all diameters for all bone widths.
59
ARRP: Indications
All bone types
All bone widths
Small prosthetic spaces
Maxillary lateral incisors and mandibular incisors
Narrow alveolar ridges
60
ARRP: The Narrow Arrow Size comparison between
DFI 3.3 mm and ARRP 3.3 mm
The ARRP is narrower throughout the entire length of the implant, making it ideal for extremely narrow ridges.
61
3.75 mmd
2.7 mmd
Trans-Gingival Neck
The trans gingival neck can be placed at bone level or below
62
ARRP: Clinical Benefits
Self-tapping feature
Bone condensing property
High initial stability
Suitable for Immediate loading
63
ARRC: Features
Threaded implant
Designed for one or 2 stage surgical procedures and overdenture restorations
Can be restored with straight or angled abutments, or with ball attachment
65
ARRC: Indications
Small bone width (narrow bone)
Small prosthetic spaces
all bone types
Maxillary lateral incisors and mandibular incisors
Immediate and conventional loading of overdentures
66
ARRC: Clinical Benefits
Self-tapping feature
Bone condensing property
High initial stability
Suitable for Immediate loading
Maximal flexibility in rehabilitation options
67
ARRC Prosthetics
68
Ball Attachments
Casting
Abutment
Straight
Abutment
Angulated
Abutment
Part E Biomaterials Product Line
Simple solutions for complex cases
70
As part of Alpha-Bio Tec's commitment to providing implant dentistry a comprehensive array of solutions, Alpha-Bio's GRAFT offers simple, safe and reliable solutions for a wide range of clinical indications.
Product line includes:
• Natural Bovine Bone
• Allograft
• Synthetic Resorbable Bone
• Collagen Membrane
• Collagen Fleece
Bone Substitutes
Xenograft, natural bovine bone Synthetic, resorbable bone
71
Allografts – FDBA/DFDBA
Resorbable Membranes
Collagen membrane Collagen fleece
72
Biocryl membrane
Part F Quality Standards
Highest Quality Standards
Alpha-Bio Tec's Medical devices are:
• CE-approved
• Cleared for marketing in the USA
Alpha-Bio Tec complies with major quality system standards:
• ISO 13485:2003 including the Canadian Medical Devices Conformity Assessment System
• ISO 9001:2000
• Council Directive 93/42/EEC
FDA approval for immediate loading of single tooth for SPI and ARRP implants
74
Fatigue Test S/N Diagram
Dynamic fatigue test for endosseous dental implants according to ISO 14801: 2007 and FDA guidance.
Designed to simulate fatigue of the parts due to mastication forces over years of use.
Demonstrates the mechanical failure point and provides an important tool to the developers to improve the design.
75
Part G
Complete Package to Support Our Customers
Alpha- Bio Tec. Training and Education Center
Training and Education
A well equipped training & education center that provides a variety of comprehensive training courses
Highly experienced lecturers with both extensive clinical experience and teaching and lecturing experience
The center conducts international advanced courses
Lecturers from the center travel worldwide to provide International lectures and courses
78
Summary
Smart, simple solutions for all your needs
Advanced implant systems
Comprehensive service worldwide
Highest quality standards
© All rights reserved to Alpha-Bio Tec Ltd. 79
A Simple Way with a Global Say