SMD

LEDs

2

www.SunLED.com

3.5x2.8x0.8mm

ZMOLA109FS ◆ AlGaInP(Red) 631 8.6 11.7 120° Water ClearZMYLA109FS ◆ AlGaInP(Yellow) 590 12 13.7 120° Water ClearZDG25X109FS ◆ InGaN(Green) 515 17 19.7 120° Water ClearZCB25X109FS ◆ InGaN(Blue) 452 3.5 4.3 120° Water Clear

1. Soldering Pattern Dimension Unit : mm Tolerance : ±0.1mm.2. Luminous intensity value and wavelength are in accordance with CIE127-2007 standards.3. We reserve the right to make changes at any time to enhance the design and / or performance of the product.

Dimension Unit: mm(inches), Tolerance: ±0.25mm (0.01")

HIGH POWER

Part Number Chip Structure (Emitted Color) lpeak (nm)

Intensity(lm) IF=150mA,350mA* Viewing Angle

2θ1/2 LensMin. Typ.

Recommended Soldering Pattern

HIGH

PO

WER

5.6x3.0x0.77mm

ZMOLA143S ◆ AlGaInP(Red) 631 12 13.7 120° Water ClearZMYLA143S ◆ AlGaInP(Yellow) 590 12 14.7 120° Water ClearZDG25X143S ◆ InGaN(Green) 515 20 26.7 120° Water ClearZCB25X143S ◆ InGaN(Blue) 452 6 8.4 120° Water Clear

Dimension Unit: mm(inches), Tolerance: ±0.25mm (0.01") Recommended Soldering Pattern

3.45x3.45x2.0mm

ZMDH160S ◆ AlGaInP(Red) 640 *35 *42.7 120° Water ClearZMYH160S ◆ AlGaInP(Yellow) 594 *35 *49.7 120° Water ClearZDG10X160S ◆ AlGaInN(Green) 520 *80 *99.5 120° Water ClearZCB14X160S ◆ InGaN(Blue) 455 *17 *23.7 120° Water Clear

Dimension Unit: mm(inches), Tolerance: ±0.2mm (0.008") Recommended Soldering Pattern

5.0x5.0x1.3mm(Full Color)

ZCB25MO24DG25X111S ◆ InGaN(Blue) 452 2.9 4

120° Water Clear◆ AlGaInP(Red) 635 8.6 10.7◆ InGaN(Green) 515 12 16.7

Dimension Unit: mm(inches), Tolerance: ±0.15mm (0.006") Recommended Soldering Pattern

3

SMD LEDs

www.SunLED.comMULTI-COLOR

1.6x1.26x0.52mm (Full Color)

ZCBDMDKDG62W-2◆ InGaN(Blue) 460 40 69

140° Water Clear◆ AlGaInP(Red) 645 40 79◆ InGaN(Green) 515 120 278

Dimension Unit: mm(inches), Tolerance : ±0.2(0.008")

3.0x1.0x1.5mm (Right Angle,Full Color)

ZMEDGCBD56W◆ AlGaInP(Red) 630 80 138

150° Water Clear◆ InGaN(Green) 515 300 497◆ InGaN(Blue) 460 40 69

Dimension Unit: mm(inches), Tolerance : ±0.2(0.008")

1. Soldering Pattern Dimension Unit : mm Tolerance : ±0.1mm.2. Luminous intensity value and wavelength are in accordance with CIE127-2007 standards.3. We reserve the right to make changes at any time to enhance the design and / or performance of the product.

Recommended Soldering Pattern

Recommended Soldering Pattern

Part Number Chip Structure (Emitted Color) lpeak (nm)

Intensity(mcd) IF=20mA,5mA* Viewing Angle

2θ1/2 LensMin. Typ.

MU

LTI-COLO

R

1x1x0.2mm (Full Color)

ZBGRBBRMERK150W◆ InGaN(Green) 518 *50 *79

150° Water Clear◆ InGaN(Blue) 461 *10 *22◆ AlGaInP(Red) 632 *15 *29

Dimension Unit: mm(inches), Tolerance : ±0.1(0.004") Recommended Soldering Pattern

3.5x2.8x1.9mm (Full Color)

ZMECBDDG45S◆ AlGaInP(Red) 630 120 218

120° Water Clear◆ InGaN(Blue) 460 55 98◆ InGaN(Green) 515 400 497

ZM2CRKM2DGFBB45SCCB◆ AlGaInP(Red) 640 400 497

120° Water Clear◆ InGaN(Green) 520 1000 1590◆ InGaN(Blue) 465 200 327

Dimension Unit: mm(inches), Tolerance: ±0.25mm (0.01") Recommended Soldering Pattern

SMD

LEDs

4

www.SunLED.com

1.6x0.8x0.5mm (0603 Bi-Color)

ZVGMYK53W-9◆ AlGaInP(Green) 574 20 49

130° Water Clear◆ AlGaInP(Yellow) 590 80 148

ZVGMDK53W-9◆ AlGaInP(Green) 574 20 49

130° Water Clear◆ AlGaInP(Red) 645 40 89

ZCBDMDK53W-9◆ InGaN(Blue) 460 40 69

130° Water Clear◆ AlGaInP(Red) 645 40 89

ZDGKMDK53W-9◆ InGaN(Green) 515 200 347

130° Water Clear◆ AlGaInP(Red) 645 40 89

2.0x1.25x0.45mm (0805 Bi-Color)

ZMDKVG54W-4◆ AlGaInP(Red) 645 40 79

120° Water Clear◆ AlGaInP(Green) 574 20 49

ZMDKDGK54W-4◆ AlGaInP(Red) 645 40 79

120° Water Clear◆ InGaN(Green) 515 200 278

ZVGMYK54W-4◆ AlGaInP(Green) 574 20 49

120° Water Clear◆ AlGaInP(Yellow) 590 80 118

ZCBDMDK54W-4◆ InGaN(Blue) 460 40 79

120° Water Clear◆ AlGaInP(Red) 645 40 79

3.2x2.8x1.9mm (Full Color)

ZMDKCBDDG45S-9 ◆ AlGaInP(Red) 645 55 108

120° Water Clear◆ InGaN(Blue) 460 55 98◆ InGaN(Green) 515 400 497

Dimension Unit: mm(inches), Tolerance : ±0.2(0.008")

MULTI-COLOR

1. Soldering Pattern Dimension Unit : mm Tolerance : ±0.1mm.2. Luminous intensity value and wavelength are in accordance with CIE127-2007 standards.3. We reserve the right to make changes at any time to enhance the design and / or performance of the product.

Recommended Soldering Pattern

Recommended Soldering PatternDimension Unit: mm(inches), Tolerance: ±0.15mm (0.006")

1.6x1.25x0.65mm (0605 Bi-Color)

ZMDKVG62W-1◆ AlGaInP(Red) 645 40 79

150° Water Clear◆ AlGaInP(Green) 574 20 49

ZMDKCBD62W-1◆ AlGaInP(Red) 645 40 79

150° Water Clear◆ InGaN(Blue) 460 40 79

Recommended Soldering PatternDimension Unit: mm(inches), Tolerance : ±0.2(0.008")

MU

LTI-C

OLO

R

Part Number Chip Structure (Emitted Color) lpeak (nm)

Intensity(mcd) IF=20mA Viewing Angle

2θ1/2 LensMin. Typ.

Recommended Soldering PatternDimension Unit: mm(inches), Tolerance : ±0.1(0.004")

5

SMD LEDs

www.SunLED.comMULTI-COLOR

1. Soldering Pattern Dimension Unit : mm Tolerance : ±0.1mm.2. Luminous intensity value and wavelength are in accordance with CIE127-2007 standards.3. We reserve the right to make changes at any time to enhance the design and / or performance of the product.

Part Number Chip Structure (Emitted Color) lpeak (nm)

Intensity(mcd) IF=20mA Viewing Angle

2θ1/2 LensMin. Typ.

MU

LTI-COLO

R

3.0x1.0x2.0mm (Right Angle Bi-Color)

ZMDKVG56W◆ AlGaInP(Red) 645 40 79

140° Water Clear◆ AlGaInP(Green) 574 40 69

ZMDKDGK56W◆ AlGaInP(Red) 645 40 79

140° Water Clear◆ InGaN(Green) 515 200 317

ZMDKCBD56W◆ AlGaInP(Red) 645 40 79

140° Water Clear◆ InGaN(Blue) 460 40 89

ZMYKVG56W◆ AlGaInP(Yellow) 590 80 118

140° Water Clear◆ AlGaInP(Green) 574 40 69

3.0x2.5x1.1mm (1109 Bi-Color)

ZMDKVG57W◆ AlGaInP(Red) 645 40 69

160° Water Clear◆ AlGaInP(Green) 574 20 59

ZMDKCBD57W◆ AlGaInP(Red) 645 40 69

160° Water Clear◆ InGaN(Blue) 460 55 79

3.2x1.6x1.8mm (1206 Dome Lens Bi-Color)

ZMDKVG55W-8◆ AlGaInP(Red) 645 300 597

30° Water Clear◆ AlGaInP(Green) 574 120 248

ZMDKDGK55W-8◆ AlGaInP(Red) 645 300 597

30° Water Clear◆ InGaN(Green) 515 400 647

ZMDKCBD55W-8◆ AlGaInP(Red) 645 300 597

30° Water Clear◆ InGaN(Blue) 460 120 248

ZMYKVG55W-8◆ AlGaInP(Yellow) 590 300 597

30° Water Clear◆ AlGaInP(Green) 574 120 248

ZM2CRKCYK55W-8◆ AlGaInP(Red) 640 700 1295

30° Water Clear◆ AlGaInP(Yellow) 590 400 695

ZM2CRKFBB55W-8◆ AlGaInP(Red) 640 700 1295

30° Water Clear◆ InGaN(Blue) 465 120 278

ZM2CYKM2DG55W-8◆ AlGaInP(Yellow) 590 700 1195

30° Water Clear◆ InGaN(Green) 520 700 1295

ZM2CRKM2DG55W-8◆ AlGaInP(Red) 640 700 1295

30° Water Clear◆ InGaN(Green) 520 700 1295

Recommended Soldering PatternDimension Unit: mm(inches), Tolerance : ±0.2(0.008")

Recommended Soldering PatternDimension Unit: mm(inches), Tolerance : ±0.2(0.008")

Recommended Soldering PatternDimension Unit: mm(inches), Tolerance: ±0.15mm (0.006")

SMD

LEDs

6

www.SunLED.com

3.2x1.6x1.8mm (1206 Dome Lens Bi-Color)

ZMDKVG55W-7◆ AlGaInP(Red) 645 300 597

30° Water Clear◆ AlGaInP(Green) 574 120 248

ZMYKVG55W-7◆ AlGaInP(Yellow) 590 300 597

30° Water Clear◆ AlGaInP(Green) 574 120 248

Part Number Chip Structure(Emitted Color) lpeak (nm)

Intensity(mcd) IF=20mA Viewing Angle

2θ1/2 LensMin. Typ.

MULTI-COLOR

1. Soldering Pattern Dimension Unit : mm Tolerance : ±0.1mm.2. Luminous intensity value and wavelength are in accordance with CIE127-2007 standards.3. We reserve the right to make changes at any time to enhance the design and / or performance of the product.

MU

LTI-C

OLO

R

Dimension Unit: mm(inches), Tolerance : ±0.1(0.004") Recommended Soldering Pattern

3.2x1.6x1.1mm (1206 Bi-Color)

ZMDKVG55W-4◆ AlGaInP(Red) 645 20 69

140° Water Clear◆ AlGaInP(Green) 574 40 79

ZMDKDGK55W-4◆ AlGaInP(Red) 645 20 69

140° Water Clear◆ InGaN(Green) 515 200 397

ZMDKCBD55W-4◆ AlGaInP(Red) 645 20 69

140° Water Clear◆ InGaN(Blue) 460 40 98

ZMYKVG55W-4◆ AlGaInP(Yellow) 590 80 148

140° Water Clear◆ AlGaInP(Green) 574 40 79

Recommended Soldering PatternDimension Unit: mm(inches), Tolerance : ±0.2(0.008")

3.5x2.8x1.9mm (PLCC4 Bi-Color)

ZMDKVG45WT◆ AlGaInP(Red) 645 55 98

120° Water Clear◆ AlGaInP(Green) 574 40 79

ZMYKVG45WT◆ AlGaInP(Yellow) 590 120 238

120° Water Clear◆ AlGaInP(Green) 574 40 79

Dimension Unit: mm(inches), Tolerance: ±0.25mm (0.01") Recommended Soldering Pattern

7

SMD LEDs

www.SunLED.com

1.0x0.5x0.2mm (0402 Super Thin)

ZMDR68W-3 ◆ AlGaInP(Red) 639 20 64 120° Water ClearZMER68W-3 ◆ AlGaInP(Red) 632 20 74 120° Water ClearZMOR68W-3 ◆ AlGaInP(Orange) 611 40 89 120° Water ClearZMYR68W-3 ◆ AlGaInP(Yellow) 591 55 98 120° Water ClearZVGR68W-3 ◆ AlGaInP(Green) 572 12 34 120° Water ClearZBGR68W5MAV-3 ◆ InGaN(Green) 518 *30 *69 140° Water ClearZBBR68W5MAV-3 ◆ InGaN(Blue) 461 *20 *27 140° Water Clear

Part Number Chip Structure(Emitted Color) lpeak (nm)

Intensity(mcd) IF=10mA,5mA* Viewing Angle

2θ1/2 LensMin. Typ.

TOP EMITTING

1. Soldering Pattern Dimension Unit : mm Tolerance : ±0.1mm.2. Luminous intensity value and wavelength are in accordance with CIE127-2007 standards.3. We reserve the right to make changes at any time to enhance the design and / or performance of the product.

Part Number Chip Structure (Emitted Color) lpeak (nm)

Intensity(mcd) IF=20mA,5mA* Viewing Angle

2θ1/2 LensMin. Typ.

TOP EM

ITTING

Recommended Soldering PatternDimension Unit: mm(inches), Tolerance : ±0.1(0.004")

0.65x0.35x0.2mm (0201)

ZMDR155W ◆ AlGaInP(Red) 639 10 34 140° Water ClearZMER155W ◆ AlGaInP(Red) 632 15 39 140° Water ClearZMOR155W ◆ AlGaInP(Orange) 611 20 49 140° Water ClearZMYR155W ◆ AlGaInP(Yellow) 591 10 29 140° Water ClearZVGR155W ◆ AlGaInP(Green) 572 6 14 140° Water ClearZBGR155W5MAV ◆ InGaN(Green) 518 *30 *79 140° Water ClearZBBR155W5MAV ◆ InGaN(Blue) 461 *15 *24 140° Water Clear

Recommended Soldering PatternDimension Unit: mm(inches), Tolerance : ±0.1(0.004")

PRODU

CT HIGHLIGHT

As new product designs become smaller and more compact, the need for smaller components has become more prevalent. We have seen the optoelectronics industry go from a 1206 sized LED down to an 0402 size where footprint reduction technology has come to a halt for the past many years. SunLED is excited to make this remarkably unprec-edented, groundbreaking announcement of the world’s smallest LED - the 0201 footprint.

With a footprint of 0.65mm x 0.35mm at a mere 0.20mm height, this new LED offers over 50% size reduction compared to an 0402, shattering all restraints tying down product designs. A full spectrum of colors is readily available providing a brilliant output for the miniscule size of the LED, making this product a versatile solution for any design.

PRODUCT APPLICATIONS■ Membrane Switches ■ Consumer Electronics ■ Medical & Healthcare■ Fitness Wearables ■ Instrumentation ■ Power Management Systems■ Mobile Devices & Hand Held Products

PRODUCT FEATURES■ World’s Smallest LED - 0201 Footprint ■ DFN style package - Dual Flat No-Leads■ Dimensions: 0.65x0.35x0.20mm (LxWxH) ■ High brightness output at IF=10mA operation■ Moisture Sensitivity Level (MLS): 2 ■ Nanoscaled Footprint

NanoPoint-0201 - Zxx155W Series PRODUCT HIGHLIGHT

SMD

LEDs

8

www.SunLED.comTOP EMITTING

Part Number Chip Structure (Emitted Color) lpeak (nm)

Intensity(mcd) IF=20mA Viewing Angle

2θ1/2 LensMin. Typ.

1.0x0.5x0.5mm (0402)

ZMDK68W-2 ◆ AlGaInP(Red) 645 40 69 120° Water ClearZMOK68W-2 ◆ AlGaInP(Orange) 610 80 148 120° Water ClearZMYK68W-2 ◆ AlGaInP(Yellow) 590 80 148 120° Water ClearZVG68W-2 ◆ AlGaInP(Green) 574 20 49 120° Water ClearZDGK68W-2 ◆ InGaN(Green) 515 200 397 140° Water ClearZCBD68W-2 ◆ InGaN(Blue) 460 40 59 140° Water Clear

Recommended Soldering PatternDimension Unit: mm(inches), Tolerance : ±0.1(0.004")

1. Soldering Pattern Dimension Unit : mm Tolerance : ±0.1mm.2. Luminous intensity value and wavelength are in accordance with CIE127-2007 standards.3. We reserve the right to make changes at any time to enhance the design and / or performance of the product.

1.6x0.8x0.75mm (0603)

ZMDK53W-1 ◆ AlGaInP(Red) 645 40 79 120° Water ClearZM2CRK53W-1 ◆ AlGaInP(Red) 640 200 347 120° Water ClearZMOK53W-1 ◆ AlGaInP(Orange) 610 80 178 120° Water ClearZMYK53W-1 ◆ AlGaInP(Yellow) 590 80 148 120° Water ClearZM2CYK53W-1 ◆ AlGaInP(Yellow) 590 200 317 120° Water ClearZVG53W-1 ◆ AlGaInP(Green) 574 20 49 120° Water ClearZDGK53W-1 ◆ InGaN(Green) 515 200 347 130° Water ClearZM2DG53W-1 ◆ InGaN(Green) 520 500 795 130° Water ClearZCBD53W-1 ◆ InGaN(Blue) 460 40 98 130° Water ClearZFBB53W-1 ◆ InGaN(Blue) 465 120 178 130° Water Clear

Recommended Soldering PatternDimension Unit: mm(inches), Tolerance: ±0.1mm (0.004")

TOP

EMIT

TIN

G

1.6x0.8x0.25mm (0603 Super Thin)

ZMDKT53W-6 ◆ AlGaInP(Red) 645 55 108 120° Water ClearZMOKT53W-6 ◆ AlGaInP(Orange) 610 55 98 120° Water ClearZMYKT53W-6 ◆ AlGaInP(Yellow) 590 55 118 120° Water ClearZVGT53W-6 ◆ AlGaInP(Green) 574 20 49 120° Water ClearZDGK53W-6 ◆ InGaN(Green) 515 300 397 130° Water ClearZCBD53W-6 ◆ InGaN(Blue) 460 40 98 130° Water Clear

Recommended Soldering PatternDimension Unit: mm(inches), Tolerance : ±0.1(0.004")

1.6x0.8x0.45mm (0603)

ZMDK53W-3 ◆ AlGaInP(Red) 645 40 79 120° Water ClearZMOK53W-3 ◆ AlGaInP(Orange) 610 80 178 120° Water ClearZMYK53W-3 ◆ AlGaInP(Yellow) 590 80 148 120° Water ClearZVG53W-3 ◆ AlGaInP(Green) 574 20 49 120° Water ClearZDGK53W-3 ◆ InGaN(Green) 515 200 347 130° Water ClearZCBD53W-3 ◆ InGaN(Blue) 460 40 98 130° Water Clear

Recommended Soldering PatternDimension Unit: mm(inches), Tolerance : ±0.1(0.004")

9

SMD LEDs

www.SunLED.com

Part Number Chip Structure (Emitted Color) lpeak (nm)

Intensity(mcd) IF=20mA Viewing Angle

2θ1/2 LensMin. Typ.

TOP EMITTING

1.6x0.8x0.95mm (0603 Dome Lens)

ZMDK53W-8 ◆ AlGaInP(Red) 645 80 248 60° Water ClearZM2CRK53W-8 ◆ AlGaInP(Red) 640 500 795 60° Water ClearZMOK53W-8 ◆ AlGaInP(Orange) 610 200 497 60° Water ClearZMYK53W-8 ◆ AlGaInP(Yellow) 590 300 597 60° Water ClearZM2CYK53W-8 ◆ AlGaInP(Yellow) 590 400 795 60° Water ClearZVG53W-8 ◆ AlGaInP(Green) 574 80 188 60° Water ClearZDGK53W-8 ◆ InGaN(Green) 515 700 1195 60° Water ClearZM2DG53W-8 ◆ InGaN(Green) 520 1000 1495 60° Water ClearZCBD53W-8 ◆ InGaN(Blue) 460 80 198 40° Water ClearZFBB53W-8 ◆ InGaN(Blue) 465 200 347 40° Water Clear

Recommended Soldering PatternDimension Unit: mm(inches), Tolerance : ±0.15(0.006")

2.0x1.25x0.75mm (0805)

ZMDK54W-1 ◆ AlGaInP(Red) 645 40 79 140° Water ClearZM2CRK54W-1 ◆ AlGaInP(Red) 640 200 347 140° Water ClearZMOK54W-1 ◆ AlGaInP(Orange) 610 80 178 140° Water ClearZMYK54W-1 ◆ AlGaInP(Yellow) 590 80 148 140° Water ClearZM2CYK54W-1 ◆ AlGaInP(Yellow) 590 200 317 140° Water ClearZVG54W-1 ◆ AlGaInP(Green) 574 20 49 140° Water ClearZDGK54W-1 ◆ InGaN(Green) 515 200 347 140° Water ClearZM2DG54W-1 ◆ InGaN(Green) 520 500 795 140° Water ClearZCBD54W-1 ◆ InGaN(Blue) 460 40 98 140° Water ClearZFBB54W-1 ◆ InGaN(Blue) 465 120 178 140° Water Clear

Dimension Unit: mm(inches), Tolerance : ±0.1(0.004") Recommended Soldering Pattern

TOP EM

ITTING

PRODU

CT HIGHLIGHT

Great things come in small packages. If you haven’t heard that saying before, you better believe it now. SunLED welcomes you the prepare your eyes for a look at our 0603 SMD with a dome lens. With its 1.6mm x 0.8mm footprint and 0.95mm height, the PixsoLED is a bright source of directed light from a package small enough to lose if you just blink too hard.Its 60° narrow viewing angle allows for greater intensity output. On limited real estate, the PixsoLED is an excellent choice for those wanting a high-visibility indicator. Its pixel-like qualities make it an ideal LED for a wide range of applications such as signs and indoor displays to hand held device indication and membrane switches on appliances.

PRODUCT APPLICATIONS■ Appliances ■ Consumer Electronics ■ Medical & Healthcare■ Light Pipe Indication ■ Icon / Text Backlighting ■ Safety & Security■ Mobile Devices & Hand Held Products

PRODUCT FEATURES■ Small form factor: 1.6x0.8x0.95mm (0603) ■ Narrow angle of emission: 60°■ Low Current/High Output: Up to 1495mcd @ 20mA ■ Available colors: Red, Yellow, Orange, True Green, Yellow-Green, and Blue

PixsoLED - Zxx53W-8 Series PRODUCT HIGHLIGHT

1. Soldering Pattern Dimension Unit : mm Tolerance : ±0.1mm.2. Luminous intensity value and wavelength are in accordance with CIE127-2007 standards.3. We reserve the right to make changes at any time to enhance the design and / or performance of the product.

SMD

LEDs

10

www.SunLED.com

Part Number Chip Structure (Emitted Color) lpeak (nm)

Intensity(mcd) IF=20mA Viewing Angle

2θ1/2 LensMin. Typ.

TOP EMITTING

1. Soldering Pattern Dimension Unit : mm Tolerance : ±0.1mm.2. Luminous intensity value and wavelength are in accordance with CIE127-2007 standards.3. We reserve the right to make changes at any time to enhance the design and / or performance of the product.

3.2x1.6x1.1mm (1206 Inner Lens)

ZMDK55W-A2 ◆ AlGaInP(Red) 645 120 228 80° Water ClearZMOK55W-A2 ◆ AlGaInP(Orange) 610 200 347 80° Water ClearZMYK55W-A2 ◆ AlGaInP(Yellow) 590 200 347 80° Water ClearZVG55W-A2 ◆ AlGaInP(Green) 574 55 98 80° Water ClearZDGK55W-A2 ◆ InGaN(Green) 515 700 995 80° Water ClearZCBD55W-A2 ◆ InGaN(Blue) 460 120 248 80° Water ClearZFBB55W-A2 ◆ InGaN(Blue) 465 400 597 80° Water Clear

3.0x1.5x1.4mm (1106 Inner Lens)

ZMDK60W ◆ AlGaInP(Red) 645 120 178 70° Water ClearZM2CRK60W ◆ AlGaInP(Red) 640 500 795 70° Water ClearZMOK60W ◆ AlGaInP(Orange) 610 120 347 70° Water ClearZMYK60W ◆ AlGaInP(Yellow) 590 200 347 70° Water ClearZM2CYK60W ◆ AlGaInP(Yellow) 590 500 845 70° Water ClearZVG60W ◆ AlGaInP(Green) 574 55 118 70° Water ClearZDGK60W ◆ InGaN(Green) 515 500 695 50° Water ClearZCBD60W ◆ InGaN(Blue) 460 120 198 50° Water ClearZFBB60W ◆ InGaN(Blue) 465 300 397 50° Water Clear

Dimension Unit: mm(inches), Tolerance : ±0.2(0.008") Recommended Soldering Pattern

Dimension Unit: mm(inches), Tolerance : ±0.1(0.004") Recommended Soldering Pattern

TOP

EMIT

TIN

G

3.2x1.6x0.75mm (1206)

ZMDK55W-1 ◆ AlGaInP(Red) 645 40 79 140° Water ClearZM2CRK55W-1 ◆ AlGaInP(Red) 640 200 347 140° Water ClearZMOK55W-1 ◆ AlGaInP(Orange) 610 80 178 140° Water ClearZMYK55W-1 ◆ AlGaInP(Yellow) 590 80 148 140° Water ClearZM2CYK55W-1 ◆ AlGaInP(Yellow) 590 200 317 140° Water ClearZVG55W-1 ◆ AlGaInP(Green) 574 20 49 140° Water ClearZDGK55W-1 ◆ InGaN(Green) 515 200 347 150° Water ClearZM2DG55W-1 ◆ InGaN(Green) 520 500 795 150° Water ClearZCBD55W-1 ◆ InGaN(Blue) 460 40 98 150° Water ClearZFBB55W-1 ◆ InGaN(Blue) 465 120 178 150° Water Clear

Dimension Unit: mm(inches), Tolerance : ±0.2(0.008") Recommended Soldering Pattern

11

SMD LEDs

www.SunLED.com

3.2x1.6x1.8mm (1206 Dome Lens)

ZMDK55W-3 ◆ AlGaInP(Red) 645 300 795 40° Water ClearZM2CRK55W-3 ◆ AlGaInP(Red) 640 1600 2490 40° Water ClearZMOK55W-3 ◆ AlGaInP(Orange) 610 500 995 40° Water ClearZMYK55W-3 ◆ AlGaInP(Yellow) 590 700 795 40° Water ClearZM2CYK55W-3 ◆ AlGaInP(Yellow) 590 1300 1690 40° Water ClearZVG55W-3 ◆ AlGaInP(Green) 574 120 297 40° Water ClearZDGK55W-3 ◆ InGaN(Green) 515 1900 3290 30° Water ClearZM2DG55W-3 ◆ InGaN(Green) 520 3100 4190 30° Water ClearZCBD55W-3 ◆ InGaN(Blue) 460 300 695 30° Water ClearZFBB55W-3 ◆ InGaN(Blue) 465 700 1195 30° Water Clear

3.2x2.4x2.4mm (Dome Lens)

ZMDK78W ◆ AlGaInP(Red) 645 700 1495 20° Water ClearZM2CRK78W ◆ AlGaInP(Red) 640 2300 3490 20° Water ClearZMOK78W ◆ AlGaInP(Orange) 610 1000 1590 20° Water ClearZM2MOK78W ◆ AlGaInP(Orange) 611 3100 3790 20° Water ClearZMYK78W ◆ AlGaInP(Yellow) 590 1000 1295 20° Water ClearZM2CYK78W ◆ AlGaInP(Yellow) 590 2300 3290 20° Water ClearZVG78W ◆ AlGaInP(Green) 574 400 597 20° Water ClearZDGK78W ◆ InGaN(Green) 515 3100 5790 20° Water ClearZM2DG78W ◆ InGaN(Green) 520 3600 5990 20° Water ClearZCBD78W ◆ InGaN(Blue) 460 500 895 20° Water ClearZFBB78W ◆ InGaN(Blue) 465 1600 1990 20° Water Clear

Part Number Chip Structure (Emitted Color) lpeak (nm)

Intensity(mcd) IF=20mA,30mA*,50mA** Viewing Angle

2θ1/2 LensMin. Typ.

TOP EMITTING

Recommended Soldering PatternDimension Unit: mm(inches), Tolerance : ±0.1(0.004")

1. Soldering Pattern Dimension Unit : mm Tolerance : ±0.1mm.2. Luminous intensity value and wavelength are in accordance with CIE127-2007 standards.3. We reserve the right to make changes at any time to enhance the design and / or performance of the product.

TOP EM

ITTING

Recommended Soldering PatternDimension Unit: mm(inches), Tolerance : ±0.2(0.008")

3.5x2.8x3.2mm (Dome Lens)

ZM2CRK45W50MAV-6 ◆ AlGaInP(Red) 640 **2700 **4790 60° Water ClearZM2CYK45W50MAV-6 ◆ AlGaInP(Yellow) 590 **2300 **4490 60° Water ClearZDGK45W30MAV-6 ◆ InGaN(Green) 515 *1300 *2090 60° Water ClearZFBB45W30MAV-6 ◆ InGaN(Blue) 465 *500 *1195 60° Water Clear

Recommended Soldering PatternDimension Unit: mm(inches), Tolerance : ±0.2(0.008")

SMD

LEDs

12

www.SunLED.com

1. Soldering Pattern Dimension Unit : mm Tolerance : ±0.1mm.2. Luminous intensity value and wavelength are in accordance with CIE127-2007 standards.3. We reserve the right to make changes at any time to enhance the design and / or performance of the product.

Part Number Chip Structure (Emitted Color) lpeak (nm)

Intensity(mcd) IF=20mA Viewing Angle

2θ1/2 LensMin. Typ.

TOP EMITTING

3.5x2.8x1.9mm (PLCC2)

ZMDK45WT ◆ AlGaInP(Red) 645 55 98 120° Water ClearZM2CRK45WT ◆ AlGaInP(Red) 640 300 447 120° Water ClearZMOK45WT ◆ AlGaInP(Orange) 610 120 228 120° Water ClearZMYK45WT ◆ AlGaInP(Yellow) 590 120 248 120° Water ClearZM2CYK45WT ◆ AlGaInP(Yellow) 590 200 447 120° Water ClearZVG45WT ◆ AlGaInP(Green) 574 40 98 120° Water ClearZDGK45WT ◆ InGaN(Green) 515 300 497 120° Water ClearZM2DG45WT ◆ InGaN(Green) 520 1000 1395 120° Water ClearZCBD45S ◆ InGaN(Blue) 460 80 148 120° Water ClearZFBB45S ◆ InGaN(Blue) 465 300 447 120° Water Clear

Recommended Soldering PatternDimension Unit: mm(inches), Tolerance: ±0.25mm (0.01")

TOP

EMIT

TIN

G

3.0x2.0x1.3mm (PLCC2)

ZMDK105S ◆ AlGaInP(Red) 645 40 89 120° Water ClearZM2CRK105S ◆ AlGaInP(Red) 640 300 447 120° Water ClearZMOK105S ◆ AlGaInP(Orange) 610 120 297 120° Water ClearZM2MOK105S ◆ AlGaInP(Orange) 611 400 695 120° Water ClearZMYK105S ◆ AlGaInP(Yellow) 590 120 198 120° Water ClearZM2CYK105S ◆ AlGaInP(Yellow) 590 300 497 120° Water ClearZVG105S ◆ AlGaInP(Green) 574 40 79 120° Water ClearZDGK105S ◆ InGaN(Green) 515 400 695 120° Water ClearZM2DG105S ◆ InGaN(Green) 520 700 1295 120° Water ClearZCBD105S ◆ InGaN(Blue) 460 80 118 120° Water ClearZFBB105S ◆ InGaN(Blue) 465 200 447 120° Water Clear

Recommended Soldering PatternDimension Unit: mm(inches), Tolerance : ±0.2(0.008")

3.8x2.0x3.2mm (Dome Lens)

ZM2CRK79W ◆ AlGaInP(Red) 640 1000 1690 60°(H) 35°(V) Water ClearZM2CYK79W ◆ AlGaInP(Yellow) 590 700 1195 60°(H) 35°(V) Water ClearZM2DG79W ◆ InGaN(Green) 520 1900 2690 60°(H) 35°(V) Water ClearZFBB79W ◆ InGaN(Blue) 465 500 745 60°(H) 35°(V) Water Clear

Recommended Soldering PatternDimension Unit: mm(inches), Tolerance : ±0.2(0.008")

13

SMD LEDs

www.SunLED.comSIDE EMITTING

1. Soldering Pattern Dimension Unit : mm Tolerance : ±0.1mm.2. Luminous intensity value and wavelength are in accordance with CIE127-2007 standards.3. We reserve the right to make changes at any time to enhance the design and / or performance of the product.

Part Number Chip Structure (Emitted Color) lpeak (nm)

Intensity(mcd) IF=20mA,5mA* Viewing Angle

2θ1/2 LensMin. Typ.

1.6x0.6x1.2mm (0602 Right Angle)

ZMDK87W ◆ AlGaInP(Red) 645 40 79 110° Water ClearZMOK87W ◆ AlGaInP(Orange) 610 80 178 110° Water ClearZMYK87W ◆ AlGaInP(Yellow) 590 80 148 110° Water ClearZVG87W ◆ AlGaInP(Green) 574 20 49 110° Water ClearZDGK87W ◆ InGaN(Green) 515 200 297 110° Water ClearZCBD87W ◆ InGaN(Blue) 460 40 79 110° Water ClearZFBB87W ◆ InGaN(Blue) 465 120 198 110° Water Clear

Recommended Soldering PatternDimension Unit: mm(inches), Tolerance : ±0.1(0.004")

SIDE EMITTIN

G

1.6x0.2x0.9mm (0601 Right Angle)

ZMEF151W ◆ AlGaInP(Red) 632 55 118 150° Water ClearZMYF151W ◆ AlGaInP(Yellow) 591 40 74 150° Water ClearZVGF151W ◆ AlGaInP(Green) 573 12 29 150° Water ClearZCBDF151W5MAV ◆ InGaN(Blue) 460 *8 *19 150° Water Clear

Recommended Soldering PatternDimension Unit: mm(inches), Tolerance : ±0.1(0.004")

PRODU

CT HIGHLIGHT

SunLED reveals a new super thin right angle SMD package; Zxx151W Series. Taking advantage of the latest compact chip technology, this LED has a footprint of 1.6mm x 0.9mm at a super thin 0.2mm package height. This new package is 66% thinner than our current thin, 0.6mm SMD package, bringing advantages for engineers looking for an extremely low profile solution.

Available in a range of colors (red, yellow, green, blue), with a low profile height and a wide viewing angle ranging from 130°-160°, this LED is exceptional for fitness wearables, medical devices, membrane switches and consumer devices. Excellent choice to use on compact, ultra-thin and nanoscaled illumination designs.

PRODUCT APPLICATIONS■ Membrane Switches ■ Consumer Electronics ■ Fitness Wearables■ Medical & Healthcare ■ Mobile Devices & Hand Held Products

PRODUCT FEATURES■ Side Emitting in Nanoscaled Footprint ■ Dimensions: 1.6x0.9x0.2mm (LxWxH)■ Moisture Sensitivity Level (MSL): 3 ■ Wide vewing angle range: 130° to 160°■ Latest compact chip technology

Super Thin RA - Zxx151x Series PRODUCT HIGHLIGHT

SMD

LEDs

14

www.SunLED.comSIDE EMITTING

1. Soldering Pattern Dimension Unit : mm Tolerance : ±0.1mm.2. Luminous intensity value and wavelength are in accordance with CIE127-2007 standards.3. We reserve the right to make changes at any time to enhance the design and / or performance of the product.

Part Number Chip Structure (Emitted Color) lpeak (nm)

Intensity(mcd) IF=20mA Viewing Angle

2θ1/2 LensMin. Typ.

3.0x1.0x2.5mm (1104 Right Angle)

ZMDK56W-1 ◆ AlGaInP(Red) 645 200 297 30° Water ClearZMOK56W-1 ◆ AlGaInP(Orange) 610 200 377 30° Water ClearZMYK56W-1 ◆ AlGaInP(Yellow) 590 300 447 30° Water ClearZVG56W-1 ◆ AlGaInP(Green) 574 80 148 30° Water ClearZDGK56W-1 ◆ InGaN(Green) 515 500 695 30° Water ClearZCBD56W-1 ◆ InGaN(Blue) 460 120 198 30° Water ClearZFBB56W-1 ◆ InGaN(Blue) 465 300 447 30° Water Clear

Recommended Soldering PatternDimension Unit: mm(inches), Tolerance : ±0.15(0.006")

SIDE

EM

ITTI

NG 2.1x0.6x1.0mm

(0802 Right Angle)

ZMDK74W ◆ AlGaInP(Red) 645 40 79 140° Water ClearZM2CRK74W ◆ AlGaInP(Red) 640 200 377 140° Water ClearZMOK74W ◆ AlGaInP(Orange) 610 80 178 140° Water ClearZMYK74W ◆ AlGaInP(Yellow) 590 80 148 140° Water ClearZM2CYK74W ◆ AlGaInP(Yellow) 590 200 347 140° Water ClearZVG74W ◆ AlGaInP(Green) 574 20 49 140° Water ClearZDGK74W ◆ InGaN(Green) 515 200 297 170° Water ClearZM2DG74W ◆ InGaN(Green) 520 400 647 170° Water ClearZCBD74W ◆ InGaN(Blue) 460 40 79 170° Water ClearZFBB74W ◆ InGaN(Blue) 465 120 198 170° Water Clear

Recommended Soldering PatternDimension Unit: mm(inches), Tolerance : ±0.1(0.004")

3.0x1.0x2.0mm (1104 Right Angle)

ZUR56W ◆ GaAsP/GaP(Red) 627 3 5 120° Water ClearZMDK56W ◆ AlGaInP(Red) 645 40 79 120° Water ClearZM2CRK56W ◆ AlGaInP(Red) 640 200 377 120° Water ClearZMOK56W ◆ AlGaInP(Orange) 610 80 178 120° Water ClearZUY56W ◆ GaAsP/GaP(Yellow) 590 3 5 120° Water ClearZMYK56W ◆ AlGaInP(Yellow) 590 80 148 120° Water ClearZM2CYK56W ◆ AlGaInP(Yellow) 590 200 347 120° Water ClearZMG56W ◆ GaP(Green) 565 5 11 120° Water ClearZVG56W ◆ AlGaInP(Green) 574 20 49 120° Water ClearZDGK56W ◆ InGaN(Green) 515 200 297 120° Water ClearZCBD56W ◆ InGaN(Blue) 460 40 79 120° Water ClearZFBB56W ◆ InGaN(Blue) 465 120 198 120° Water Clear

Recommended Soldering PatternDimension Unit: mm(inches), Tolerance : ±0.15(0.006")

15

SMD LEDs

www.SunLED.com

2.8x0.8x1.2mm (PLCC2 Right Angle)

ZMDK81FS ◆ AlGaInP(Red) 645 40 98 110° Water ClearZM2CRK81FS ◆ AlGaInP(Red) 640 300 497 110° Water ClearZMOK81FS ◆ AlGaInP(Orange) 610 120 248 110° Water ClearZMYK81FS ◆ AlGaInP(Yellow) 590 120 198 110° Water ClearZM2CYK81FS ◆ AlGaInP(Yellow) 590 300 547 110° Water ClearZVG81FS ◆ AlGaInP(Green) 574 20 59 110° Water ClearZDGK81FS ◆ InGaN(Green) 515 500 795 110° Water ClearZM2DG81FS ◆ InGaN(Green) 520 1000 1395 110° Water ClearZCBD81FS ◆ InGaN(Blue) 460 80 148 110° Water ClearZFBB81FS ◆ InGaN(Blue) 465 200 347 110° Water Clear

SIDE EMITTING

1. Soldering Pattern Dimension Unit : mm Tolerance : ±0.1mm.2. Luminous intensity value and wavelength are in accordance with CIE127-2007 standards.3. We reserve the right to make changes at any time to enhance the design and / or performance of the product.

Part Number Chip Structure(Emitted Color) lpeak (nm)

Intensity(mcd) IF=20mA Viewing Angle

2θ1/2 LensMin. Max.

Recommended Soldering PatternDimension Unit: mm(inches), Tolerance : ±0.1(0.004")

SIDE EMITTIN

G

3.0x2.0x2.8mm (1208 Right Angle)

ZMDK50W-2 ◆ AlGaInP(Red) 645 400 547 10° Water ClearZM2CRK50W-2 ◆ AlGaInP(Red) 640 2300 3790 10° Water ClearZMOK50W-2 ◆ AlGaInP(Orange) 610 1900 2990 10° Water ClearZMYK50W-2 ◆ AlGaInP(Yellow) 590 500 895 10° Water ClearZM2CYK50W-2 ◆ AlGaInP(Yellow) 590 1900 2990 10° Water ClearZVG50W-2 ◆ AlGaInP(Green) 574 200 397 10° Water ClearZDGK50W-2 ◆ InGaN(Green) 515 1000 1395 10° Water ClearZM2DG50W-2 ◆ InGaN(Green) 520 2300 3290 10° Water ClearZCBD50W-2 ◆ InGaN(Blue) 460 300 397 10° Water ClearZFBB50W-2 ◆ InGaN(Blue) 465 500 795 10° Water Clear

Recommended Soldering PatternDimension Unit: mm(inches), Tolerance : ±0.2(0.008")

4.0x4.0x3.6mm (PLCC2 Right Angle)

ZMDK67WT ◆ AlGaInP(Red) 645 80 148 120° Water ClearZM2CRK67WT ◆ AlGaInP(Red) 640 400 577 120° Water ClearZMOK67WT ◆ AlGaInP(Orange) 610 80 218 120° Water ClearZMYK67WT ◆ AlGaInP(Yellow) 590 120 248 120° Water ClearZM2CYK67WT ◆ AlGaInP(Yellow) 590 400 547 120° Water ClearZVG67WT ◆ AlGaInP(Green) 574 40 89 120° Water ClearZDGK67WT ◆ InGaN(Green) 515 500 795 120° Water ClearZM2DG67WT ◆ InGaN(Green) 520 1000 1395 120° Water ClearZCBD67S ◆ InGaN(Blue) 460 80 218 120° Water ClearZFBB67S ◆ InGaN(Blue) 465 300 497 120° Water Clear

Dimension Unit: mm(inches), Tolerance: ±0.25mm (0.01") Recommended Soldering Pattern

SMD

LEDs

16

www.SunLED.comREVERSE MOUNT

1. Soldering Pattern Dimension Unit : mm Tolerance : ±0.1mm.2. Luminous intensity value and wavelength are in accordance with CIE127-2007 standards.3. We reserve the right to make changes at any time to enhance the design and / or performance of the product.

Part Number Chip Structure(Emitted Color) lpeak (nm)

Intensity(mcd) IF=20mA Viewing Angle

2θ1/2 LensMin. Typ.

3.2x1.6x1.1mm (1206 Inner Lens)

ZMDK55W-A2RT ◆ AlGaInP(Red) 645 120 228 80° Water ClearZMYK55W-A2RT ◆ AlGaInP(Yellow) 590 200 347 80° Water ClearZVG55W-A2RT ◆ AlGaInP(Green) 574 55 98 80° Water ClearZDGK55W-A2RT ◆ InGaN(Green) 515 700 995 80° Water ClearZCBD55W-A2RT ◆ InGaN(Blue) 460 120 248 80° Water Clear

Dimension Unit: mm(inches), Tolerance: ±0.1mm (0.004") Recommended Soldering Pattern

REVE

RSE

MO

UN

T 3.2x1.6x1.05mm (1206 Reverse Mount)

ZMDK55W-2 ◆ AlGaInP(Red) 645 40 79 140° Water ClearZM2CRK55W-2 ◆ AlGaInP(Red) 640 200 347 140° Water ClearZMOK55W-2 ◆ AlGaInP(Orange) 610 80 178 140° Water ClearZMYK55W-2 ◆ AlGaInP(Yellow) 590 80 148 140° Water ClearZM2CYK55W-2 ◆ AlGaInP(Yellow) 590 200 317 140° Water ClearZVG55W-2 ◆ AlGaInP(Green) 574 20 49 140° Water ClearZDGK55W-2 ◆ InGaN(Green) 515 200 347 140° Water ClearZM2DG55W-2 ◆ InGaN(Green) 520 500 795 140° Water ClearZCBD55W-2 ◆ InGaN(Blue) 460 40 98 140° Water ClearZFBB55W-2 ◆ InGaN(Blue) 465 120 178 140° Water Clear

Dimension Unit: mm(inches), Tolerance: ±0.2mm (0.008") Recommended Soldering Pattern

Designed as a next generation alternative to traditional subminiature type LEDs, SunLED’s Zxx55W-A2RT reverse-mount LED series eliminates the typical Yoke Lead or Z-Bend leads to provide engineers with a true chip type Surface Mount LED. This ensures a seamless production by alleviating any potential reflow issues inherently present in subminiature type LEDs where the leads may lift and solder unevenly.The construction of the inner dome lens provides optimal optical characteristics that truly make this LED series a versatile solution for any application demanding uniform light spread and high intensity output. Having a viewing angle of 70° ensures that the light emission is narrow enough to be paired efficiently with light pipe applications, while being wide enough to provide ample coverage for backlighting of icons and text as well as indication visibility. This series is available now in a full spectrum of standard colors.

PRODUCT APPLICATIONS■ Networking / Telecommunications ■ Consumer Electronics ■ Audio / Video■ Instrumentation ■ Medical & Healthcare ■ Safety & Security■ Light Pipe Indiciation ■ Icon / Text Backlighting

PRODUCT FEATURES■ 3.2x1.6x1.1mm - Standard 1206 footprint ■ Reverse mount package■ Moisture Sensitiviy Level (MSL): 3 ■ Inner dome lens - Versatile viewing angle■ High brightness output at IF=20mA operation

1206 Inner Dome - Zxx55W-A2RT Series PRODUCT HIGHLIGHT

PRO

DUCT

HIG

HLIG

HT

17

SMD LEDs

www.SunLED.com

3.2x2.8x1.9mm (PLCC2 Reverse Mount)

ZMDK45WT-9 ◆ AlGaInP(Red) 645 55 98 120° Water ClearZM2CRK45WT-9 ◆ AlGaInP(Red) 640 300 447 120° Water ClearZM2MOK45WT-9 ◆ AlGaInP(Orange) 611 500 795 120° Water ClearZMYK45WT-9 ◆ AlGaInP(Yellow) 590 120 248 120° Water ClearZM2CYK45WT-9 ◆ AlGaInP(Yellow) 590 200 447 120° Water ClearZVG45WT-9 ◆ AlGaInP(Green) 574 40 98 120° Water ClearZDGK45WT-9 ◆ InGaN(Green) 515 300 497 120° Water ClearZM2DG45WT-9 ◆ InGaN(Green) 520 1000 1395 120° Water ClearZCBD45S-9 ◆ InGaN(Blue) 460 80 148 120° Water ClearZFBB45S-9 ◆ InGaN(Blue) 465 300 447 120° Water Clear

Recommended Soldering PatternDimension Unit: mm(inches), Tolerance: ±0.25mm (0.01")

Part Number Chip Structure(Emitted Color) lpeak (nm)

Intensity(mcd) IF=20mA Viewing Angle

2θ1/2 LensMin. Typ.

REVERSE MOUNTREVERSE M

OU

NT

1. Soldering Pattern Dimension Unit : mm Tolerance : ±0.1mm.2. Luminous intensity value and wavelength are in accordance with CIE127-2007 standards.3. We reserve the right to make changes at any time to enhance the design and / or performance of the product.