Page 11 of 19 Revision 20111002

MP1250 CONE CRUSHER TECHNICAL SCOPE OF SUPPLY

TECHNICAL SCOPE OF SUPPLY

MP1250 Cone Crusher

SOCKET ASSEMBLY The Socket Assembly consists of a forged steel Socket and cast bronze Socket Liner. The Socket mounts on top of the Main Shaft and is held in place with bolts and a tight interference fit. Grooves on the outside diameter of the Socket act to reduce no-load head spin. The Socket Liner fits inside the Socket to support the vertical crushing forces transferred from the Head through the Head Ball. Factory Sub-Assembly Not Applicable

Site Sub-Assembly Socket Socket Liner

Specification - Socket Construction Forged Steel

Material ASTM A668, Class MH

Weight 1,045 lbs

474 kg Specification Socket Liner Construction Machined Bronze Casting

Material ASTM B 30, UNS C93700

Weight 904 lbs

410 kg Quality

Material Certificate Available upon request

PMCRS (Supplier part inspection and dimensional record)

Available for review at source location ONLY

*Shipping Preparation Crated Dimensions 59 (L) x 49 (W) x 45 (H) in

1.5 (L) x 1.2 (W) x 1.1 (H) m

Gross Weight 2,904 lbs

1,317 kg

*Shipping weights and dimensions are approximate.