Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
FINISHED WALL LINE
Max thickness:2” if mounting into a stud1-1/4” if mountingw/toggle bolts
30-5/8"(778mm)
VacuumBreaker#A7148" (203mm)
Spray Wand Height
Drop ell soldseparately
Hole Size5/8" (17mm)
2" (51mm)
4/11
Weymouth™ Single Function Handshower
with Slidebar
Models: S12107EP series
DESCRIPTION• Various finishes identified by suffix • Handheld shower• 69" double interlock spiral hose (metal)• Vacuum breaker• 30" slide bar with push button height selectionOPERATION • Single function • Handshower holder rotates to adjust angle of handshower FLOW• Designed to deliver 1.75 gpm (6.6 L/min) at 80 psiSTANDARDS• Designed and manufactured to comply with the applicable
re quire ments of CSA B-125.1, ASME A112.18.1 and ASSE 1014 and all applicable specifications referenced therein
WARRANTY• Lifetime limited warranty against material or manufacturing defects
CRITICAL DIMENSIONS(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Specifications
DESCRIPTION• Metal spray face and shell
• Brass swivel ball assembly
• Available in various inishes identiied by suix
OPERATION• Self pressurizing design that provides strong performance regard-
less of line pressure
• Two function, rain and rinse: operate lever to select
FLOW• 2.5 gpm max. (9.5 L/min) max
• EP suix models are limited to 2.0 gpm (7.6 L/min) max for products
manufactured prior to June 30, 2018. EP suix models manufac-
tured after June 30, 2018 are limited to 1.75 gpm (6.7 L/min) max.
STANDARDS• Third party certiied to ASME A112.18.1/CSA B125.1, and all applica-
ble requirements referenced therein
WARRANTY• Lifetime limited warranty against leaks, drips and inish defects to
the original homeowner
• 10 year limited warranty when used in a multifamily installation
• 5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
9" Two Function Rainshower(Showerhead Only)
Models: S1311 series
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS(DO NOT SCALE)
Rev. 12/17
8-1/2"
(216mm)
3 - 1
/8"
(79
mm
)
EP Suix Models Only
S1311EP, S1311EPBN,
S1311EPORB
CRITICAL DIMENSIONS(DO NOT SCALE)
Single Function Body Spray
Models: TS1322 series
Rough-In: S1300
1" Extension Kit: 155656
(available separately)
DIA. 5-3/8"
(137mm)
3-1/4" (83mm) 4-1/8"± 3/8"
1/2" (13mm)
HOLE SIZE4-5/8" DIA. MAX
(117mm) DIA. MAX
� � � �� �� � �� � �B � � � A
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
DESCRIPTION• Single function spray with various finishes identified by suffix • Immersion technology OPERATION • Spray face tilts 20 degrees in any direction FLOW • Designed to deliver 2.0 gpm max (7.6 L/min) at 80 psi STANDARDS• Third party certified to ASME A112.18.1/ CSA B125.1, and all
applicable requirements referenced therein WARRANTY• Lifetime limited warranty against leaks and finish defects to the
original consumer purchaser• 5 year warranty if used in commercial installations
Rev. 6/11
WEYMOUTH™
3/4” Thermostatic Shower Trim
Models: TS32110 series - Valve Trim only TS32112 series - Shower Trim only
Valve Models: S3371, S3600 (sold separately)
Rev. 8/11
2-11/16" (68mm)
9 - 3/16" (233mm)
2-1/8" (54mm)
Wall Opening
5-1/4" (133mm)
Wall Opening
8" (203mm)6” (153mm) MIN
FINISHED WALL LINE
7-5/16" (186mm)
CRITICAL DIMENSIONS(DO NOT SCALE)
� � � �� �� � �� � �B � � � A
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
FAUCET DESCRIPTION
• Metal construction with various finishes identified by suffix • Includes 9” rainshower showerhead, arm and flange• For use with S3371, 3/4” thermostatic valve and S3600, volume
control valveOPERATION
• Flow lever operates counterclockwise through a 90° arc with shut off at 6 o’clock and maximum flow at the 3 o’clock position.Shut off in clockwise direction
• Temperature lever operates through a 340° arc with maximum cold at full clockwise rotation and maximum hot at full counterclockwiserotation
• Safety stop preset temperature at 105°F (41°C)• Safety stop override allows maximum temperature at 120°F (49°C)• Factory established temperature range from 70°F (21°C) to 120°F (49°C)• Shower: Two function, rain and rinse: operate lever to select FLOW
• Showerhead is limited to 2.5 gpm (9.5 L/min) at 80 psi CARTRIDGE
• 130156 thermostatic cartridge design with non metallic/nonferrous materials
• 130157 volume ceramic disc cartridge design STANDARDS
• Third party certified to: ASME A112.18./CSA B-125.1, ASSE1016 and all applicable requirements referenced therein
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
CRITICAL DIMENSIONS(DO NOT SCALE)
�� � �� �� � �� � �B � � � A
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
DROP ELL
Models: A725 series
DESCRIPTION
• Metal construction with various finishes identified by suffix WARRANTY
• Warranted for one year against materialor manufacturing defects
BACK VIEW SIDE VIEW
BEFORE 6/1/2011
1/2-14 NPT
1/2-14
NPSL THREAD
3/8" (10mm)
Extended Pipe
1" (25mm) Minimum
Diameter Hole
Finished
Wall Surface
Pipe (Not Included)
1.85"
(47mm)2.125"
(54mm)
1/2-14 NPT
1/2-14
NPSL THREAD
3/8" (10mm)
1" (25mm) Minimum
Diameter Hole
Finished
Wall Surface
Pipe (Not Included)
2" (51mm) 2-3/8"
(60mm)
Rev. 9/11
14"(356mm)
2-1/4"(57mm)
Finished
Wall Line
6-1/8"(156mm)
DESCRIPTION• Metal construction with various finishes identified by suffix STANDARDS• Third party certified to CSA B125, ASME A112.18.1, ANSI A117.1,
ASSE 1016, and all applicable requirements referenced thereinWARRANTY• Lifetime limited warranty against leaks, drips and finish defects to
the original consumer purchaser• 5 year warranty if used in commercial installations
CRITICAL DIMENSIONS(DO NOT SCALE)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
S p e c i f i c a t i o n s
CRITICAL DIMENSIONS(DO NOT SCALE)
Rev. 3/11
Shower Arm and Flange
Model: S113 series
CRITICAL DIMENSIONS(DO NOT SCALE)
� � � �� �� � �� � �B � � � A
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
3" (76mm)
3/16" (5mm)TYP
3/4" (19mm)
Plaster Ground
Plastic Tub/ShowerSurround
4-1/2"(114mm)
Wall Opening
2-3/4" (70mm) -3-1/2" (89mm)
4-3/8" (111mm)Max Depth w/Extension Kit
FinishedWall Line
2-1/4" (57mm)Max Wall
Thickness
3/4" (19mm)
5-1/4"(133mm)
Wall Opening
ExactTemp®3/4” Thermostatic Valve
Model: S3371
Rev. 4/13
DESCRIPTION• Brass construction• 3/4" IPS connections• Thermostatic valve design with integral checkstops• 18 gpm @ 60 psiOPERATION• Temperature lever operates through a 340 degree arc with maximumcold at full clockwise rotation and maximum hot at fullcounterclockwise rotation
• Safety stop preset temperature at 105 degrees F ( 41degrees C)• Safety stop override allows maximum temperature at 120 degrees F(49 degrees C)
• Factory established temperature range from 80 degrees F (27 degreesC) to 120 degrees F (49 degrees C)
• Must be used with at least one S3600 valve.CARTRIDGE• Thermostatic cartridge design with non metallic/nonferrous materialsSTANDARDS• Third party certified to meet ASME A112.18.1/CSA B-125.1, CSAB125.3, ASSE 1016, ASSE 1070 and all applicable requirementsreferenced therein
WARRANTY• Lifetime limited warranty against leaks, drips and finish defects to theoriginal consumer purchaser
• 5 year warranty if used in commercial installations
5-7/8"
(149mm)
Thin Wall Thick Wall
CRITICAL DIMENSIONS(DO NOT SCALE)
Body Spray Rough-In
Model: S1300
3-1/4" ± 3/8" (82mm ± 10mm)
CONNECTOR TO FINISHED WALL
DIA. 4-1/2" (114mm)
PLASTER GROUND
2-1/2" ± 3/8" (63mm ± 10mm)
BRACKETTO FINISHED WALL
HOLE SIZE4-5/8" DIA. MAX.
(117mm) DIA. MAX.
8-1/2" (216mm)
1/2" CC/NPT
1/2" CC/NPT
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
DESCRIPTION• Metal construction • 1/2" CC and IPS connections • Includes mounting bracket and test plug STANDARDS• Third party certified to ASME A112.18.1/ CSA B125.1,
and all applicable requirements referenced therein WARRANTY• Lifetime limited warranty against leaks to the original
consumer purchaser• 5 year warranty if used in commercial installations
3/4"(19mm)
2-1/8"(54mm)
Wall Opening
Finished Wall Line
2-1/4" (57mm)Max Wall Thickness
2-3/4" (70mm) -3-1/2" (89mm)
4-3/4" (111mm)Max Depth withExtension Kit
3/4"(19mm)
3/16"(5mm)
TYP Plastic Tub/ShowerSurround
3" (76mm)
2-1/8"(54mm)
Wall Opening
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS(DO NOT SCALE)
� � � �� �� � �� � �B � � � A
3/4” Volume Control Valve
Model: S3600
DESCRIPTION
• Brass construction• 3/4" IPS connections• 13 gpm @ 60 psiOPERATION
• Flow lever operates counterclockwise through a 90˚ arc withoff at 6 o’clock and maximum flow at the 3 o’clock position.Shut off in clockwise direction
CARTRIDGE
• Ceramic disc cartridge designINSTALLATION
• Volume control valve must be installed with the arrow pointingin the water flow direction
STANDARDS
• Third party certified to meet CSA B-125.1, ASME A112.18.1 andall applicable requirements referenced therein includingASSE1016
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defectsto the original consumer purchaser
• 5 year warranty if used in commercial installations
Rev. 4/13
Thin Wall Thick Wall
2-3/4"
(70mm)
WEYMOUTH™
Single Function Flow Valve Trim
Models: TS52104 series
Valve: S3600 (sold separately)
DESCRIPTION • Metal construction with various finishes identified by suffix • For use with S3600 3/4" volume control valve OPERATION • Lever style handle operation STANDARDS • Third party certified to meet ASME A112.18.1/CSA B125.1, and all
applicable requirements referenced therein
• ADA for lever handle
WARRANTY• Lifetime limited warranty against leaks, drips and finish defects to
the original consumer purchaser • 5 year warranty if used in commercial installations
4/11
2-11/16"
(68mm)
2-1/8"
(54mm)
Wall Opening
3-1/2"
(89mm)
3"
(76mm)
CRITICAL DIMENSIONS(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com