Upload
others
View
9
Download
0
Embed Size (px)
Citation preview
1.Object
of
tender
SCHOTT AMIRAN® anti-reflective glass is a mineral based glass with an optical-interference coating. The anti-reflection coating can be applied on one or both surfaces and can be used for example on outside windows, display blackboards, advertising displays, boxes at sport stadiums, reception areas or show cases. The coating is applied with a dip coating which is burnt into the glass.
Offered product:
Base material
For the glass substrate extra-clear low-iron float glass is used.
Options
After consultation the following options can be offered:
curved glass thermally toughened safety glass laminated safety glass heat strengthened glass insulating glass sun protection glass sound protecting glass alarm glass security glazing glass screen printing drilling of holes edge processing.
Page 1 of 3
Tender form
SCHOTT AMIRAN® - Anti-Reflective Glass
Processed Glass
SCHOTT AGHattenbergstrasse 1055122 MainzGermany
Phone +49 (0)6131/ 66 - 2678 Fax +49 (0)6131/66-2525www.schott.com/architecture
Technical data
Glass substrate Extra-clear low-iron float glass
Luminous reflectance ρvD65 approx. 1 %Luminous transmittance τvD65 approx. 98 %Color rendering index Ra 100Thermal transmittance Ug 5.8Total solar energy transmittance factor g approx. 90 %UV transmittance factor τUV 63 %
The values refer to a glass thickness of 4 mm for monolithic glasses and are calculated based on the standards DIN EN 410 und DIN EN 673.
Notes on the coating
For single and insulating glazing, both surfaces of the low-iron glass are anti-reflective. In case of insulating glass, all surfaces in contact with the air - including those in the space between the panes - must be anti-reflective.
For manufacturing laminated glass (including attack-blocking glazing and sound insulating glass) AMIRAN® one-side coated is required. The uncoated surface must be on the laminate side, i. e. in contact with the film or resin layer. One-sided AMIRAN® is marked with labels on the anti-reflective side.
2. Relevant norms / Quality
For the “appearance“ of laminated glass and laminated safety glass the requirements according to DIN EN ISO 12543-6 are relevant.
Visual quality: Guideline for evaluating the visual quality of glass in the building industry
Test processes
- Testing of adhesion of the coating according to (DIN ISO 9211-4) ISO 9211-4-02-03- Testing of corrosion resistance of the coating according to DIN EN ISO 9227 - CASS
and DIN EN ISO 9227 – NSS- Testing of corrosion resistance of the coating according DIN EN 1096-2 class A- Testing of climate resistance of the coating according to DIN EN ISO 6270-2-CH
Page 2 of 3
3. Product description
Pos. 1:
Quantity: pieces
Glass dimensions: mm x mm(max. 3,770 mm x 1,770 mm)
Assembly
Make your selection by ticking the respective box:
SCHOTT AMIRAN®: one-side coated double-side coated
not tempered semi-tempered safety glass
4 mm 5 mm 6 mm 8 mm
10 mm* 12 mm*
* These thicknesses are only available as double-side coated.
Edge processing: straight edge, cut
seamed polished adjusted
Add more positions if needed.
For further information, please contact:
Processed GlassSCHOTT AGHattenbergstrasse 1055122 MainzGermanyPhone +49 (0)6131/ 66 - 2678Fax +49 (0)6131/ 66 - 2525www.schott.com/[email protected]
Page 3 of 3