Upload
others
View
13
Download
0
Embed Size (px)
Citation preview
S P E C I F I C A T I O N SSPEC. No. CC-1093
DATE SEP. 2013
SPECIFICATlONS
HYDRAULIC CRANE
MODEL: UNIC URW1006C2E
Specifications subject to change without notice.
UNIC CRANE PERFORMANCEMODEL : URW1006C2E
CRANE CAPACITY:
LIFTlNG CAPACITY : Max. 10.14t at 3.0m
(Including mass of hook: 140kg)
HOOK HEIGHT
ABOVE GROUND LEVEL : Max. 22.8m with 4- & 2-part line
Max. 23.0m with 1-part line
BELOW GROUND LEVEL : Max. 30.0m with 4-part line
Max. 62.0m with 2-part line
Max. 128m with 1-part line
WORKING RADIUS : Min 0.04m, Max. 21.93m
BOOM: 6-section box beam type telescoping boom
Boom Length
Retracted boom: 5.75m
Extended boom: 23.1m
Boom Extending Speed: 17.35m / 88s
Boom Raising Speed: 0° to 80° / 44s
WINCH: Hydraulic motor driven, planetary gear reduction, with
automatic mechanical brake and counterbalance valve
and wire rope retaining roller.
Hoisting Speed
Single line speed: 40 (64) m/min at 4th layer ():2nd
Hook speed: 10 (16) m/min at 4th layer with 4-part line ():2nd
20 (32) m/min at 4th layer with 2-part line ():2nd
Hook Block: 4- & 2-part line : 10.0t capacity, 3 sheaves with safety latch
1-part line : 2t capacity with safety latch
Mass of Hook Block: 4- & 2-part line : 140kg
1-part line : 50kg
Wire Rope
Construction (JIS): XP lWRC 6 × WS(31)
Diameter × Length: 13mm × 140m
Breaking strength: 131kN {13400kgf}
SLEWING: Hydraulic motor driven, worm gear reduction, spur
gear reduction, and worm self-locking brake
(supported by ball bearings)
Slewing Range: 360° continuous rotation on a ball bearing race
Slewing Speed: 1.3 rpm
-1/W1006C2E-
CC
-1093
OUTRIGGERS:
Horizontal: A double acting hydraulic cylinder, direct pushing type
(directly connected with hydraulic automatic lock device)
Vertical: A double acting hydraulic cylinder, direct pushing type
(directly connected with hydraulic automatic lock device)
Position: A double acting hydraulic cylinder with link system
HYDRAULIC SYSTEM:
Hydraulic Pump
Type: Variable delivery piston pump
Rated pressure: 24.5MPa {250kgf/cm2}
Rated delivery: 105 /min.
Rated revolution: 2500rpm
Hydraulic oil tank: 215
Hydraulic Valves
Control valve: Multiple control valve, spring centered,
spool-type, with pressure relief valve
Pressure relief
valve setting: For crawling: 27.5MPa {280kgf/cm2}
For crane (except boom raising) 20.6MPa {210kgf/cm2}
For boom raising only 15.7MPa {160kgf/cm2}
Counterbalance valve: Boom raising and boom telescoping cylinders
Pilot-operated
check valve: Outrigger cylinders (Horizontal)
Double pilot-operated
check valve: Outrigger cylinders (Vertical)
Hydraulic Actuators
Hydraulic motors: Hoisting: Axial plunger type
Slewing: Axial plunger type
Hydraulic cylinders: Double acting type
2×Boom raising cylinder
3×Boom telescoping cylinder
4×Outrigger cylinder (Horizontal)
4×Outrigger cylinder (Vertical)
4×Outrigger cylinder (Position)
1×Jib tilt cylinder(OPTION)
CRAWLING GEAR:
Track rink: 135 mm X 47 rink
Crawler belt width: 400 mm
Ground contact: 2515mm
Ground contact pressure: 68.2kPa (0.70kgf/cm2)
(based on mass of crane is 14,000kg )
Crawling speed: 0~2.6km/h, forward/backward
Hill climbing ability: 23°
Engine: 29.8kW(40.5ps)/2500rpm, Continuous rated output
Total emission 2.189
-2/W1006C2E-
CC
-1093
Steering: Hydraulic drive independent of left/right
Parking brake: Disc brake with hydraulic motor built-in
Starter: Starter motor
Fuel tank: 75 capacity
Alternator 12V – 40 A
Battery 12V 72Ah (115D31R)
Note: The figures in relation to the speed are on the basis of no-load running at rated oil
flow condition.
MAJOR SPECIFICATION OF ELECTRIC POWER UINT: (OPTION)
Hydraulic pump
Type Variable delivery piston pump
Rated pressure 24.5MPa{250kgf/cm2}
AC400V 50Hz AC400-440V60Hz
Rated delivery 50 /min 60 /min
Rated revolution 1,460rpm 1,760rpm
Motor
Rated output 11kW(3-phase 4 poles)
Rated voltage AC400/400-440V 50/60Hz
(Allowable range: AC400/400-440V±10%)
Rated frequency 50/60Hz(Allowable range : 50/60Hz±5%)
Control box
Rated voltage AC400/400V-440V 50/60Hz
(Allowable range: AC400/400-440V±10%)
Rated frequency 50/60Hz(Allowable range : 50/60Hz±5%)
Starting-up Star-delta start-up
Crane power supply DC12V(240W)output
With AC/DC converter built-in
Specified speed when using electric power unit
<50Hz> <60Hz>
Hoisting Speed Single line speed 20.8(36)m/min 24.8(43.2)m/min
:at 4th layer ():2nd
Hook speed 5.2(9)m/min 6.2(10.8)m/min
:at 4th layer with 4-part line ():2nd
12.4(21.6)m/min
:at 4th layer with 4-part line ():2nd
Boom extending Speed 17.35m/123s 17.35m/103s
Boom Raising Speed 0° to 80°/80s 0° to 80°/67s
Slewing Speed 1.2rpm 1.2rpm
Crawling Speed(forward/backward) 0-1.3km/h 0-1.5km/h
Caution
Not use engine and electric power unit together.
Be sure to confirm before starting the electric power unit that the engine has been stopped.
-3/W1006C2E-
CC
-1093
SAFETY DEVICES: 1. Pressure relief valve for hydraulic circuit
2. Counterbalance valves for boom raising
and boom telescoping cylinders
3. Pilot-operated check valves for outrigger
cylinders (Horizontal)
4. Double pilot-operated check valves for outrigger
cylinders (Vertical)
5. Boom angle indicator with load indicator
6. Hook safety latch
7. Automatic mechanical brake for winch
8. Automatic stop for over winding
9. Over winding alarm
10. Automatic stop for leaving minimum wire rope
11. Emergency stop button
12. Inter-lock device of crane and crawling levers
13. Inter-lock device of crane and outriggers
14. Three colored lamp
15. Level
16. Headlight
DIMENSIONS OF CRANE: 6060mm (L) X 2000mm (W) X 2460mm (H)
MASS OF CRANE: Approx. 14,000 kg
(Including mass of option item (power unit))
JIB
LIFTlNG CAPACITY : Max. 1.05t at 9.7m (boom angle 70° and jib tilt angle 0° )
(Including mass of hook : 50kg)
HOOK HEIGHT
ABOVE GROUND LEVEL : Max. 30.7m
BELOW GROUND LEVEL : Max. 123.0m with 1-part line
WORKING RADIUS : Max. 24.3m
-4/W1006C2E-
CC
-1093
RADIO REMOTE CONTROLLER
Model: RC-500H-EU3
System: Manual/remote control combined system
Control: 1. Selective control Boom raise / lower
Crane mode / Outrigger(Position/
Horizontal / Vertical ) mode
Hook hoist / lower
( Winch 1st / 2nd )
Boom extend / retract
( Boom telescoping / Jib tilt )
Slewing clockwise / counterclockwise
( Engine start / stop )
2. Store hook Hook storage
3. Start/Warning horn Start radio remote control and
recovered emergency stop/ Horn
4. Speed control lever Hydraulic control and engine
speed control
5. Speed mode select High speed mode(normal mode)/
Medium speed mode/Low speed mode
6. Key switch Transmitter power on-off
7. Emergency-stop switch Stop function of crane
Power supply: Controller Crawler battery (DC12V)
Transmitter Four R03 dry cells (DC6V)
Power consumption: Controller Approx. 50 W
Single selective operation at
maximum operating speed
Transmitter Battery life more than 20 hours
(of transmitter operation)
Transmitted output power: 10mW
Operating range: Approx. 100m
Frequency: 433 ~ 434 MHz Band
Unit address: Special address combining a frequency and ID code is
assigned to each unit.
Mass of transmitter: 700g (with batteries)
Ambient temperature: -20 °C ~ +60 °C
Storage temperature: -30 °C ~ +75 °C
Caution
In accordance with our policy of constant product improvement , all specifications are subject to
change without notice or obligations.
-5/W1006C2E-
CC
-1093
WORKING RANGE:
Note: The above figures are based on no-load condition and do not include the deflection of the
boom.
-6/W1006C2E
CC
-1093
Heig
ht(
m)
Working Radius(m)
23.1m Boom
19.65m Boom
16.2m Boom
12.75m Boom
9.25m Boom
5.75m Boom
TILT ANGLE 40°
TILT ANGLE 0°
TILT ANGLE 20°
TILT ANGLE 60°
-
WORKING RANGE
Main Boom,4-Part Line
Note: The above figures are based on no-load condition and do not include the deflection of the
boom
-7/W1006C2E-
CC
-1093
Heig
ht(
m)
Working Radius(m)
WORKING RANGE
Main Boom ,2-Part Line
Note: The above figures are based on no-load condition and do not include the deflection of the
boom
-8/W1006C2E-
CC
-1093
Heig
ht(
m)
Working Radius(m)
WORKING RANGE
Main Boom ,Single Line
Note: The above figures are
based on no-load condition
and do not include the
deflection of the boom
-9/W1006C2E-
CC
-1093
Heig
ht(
m)
Working Radius(m)
WORKING RANGE
Jib , Tilt Angle 0-40°,Outriggers extended to maximum and halfway
Note: The above figures are based on no-load condition and do not include the deflection of the
boom
-10/W1006C2E-
CC
-1093
Heig
ht(
m)
Working Radius(m)
WORKING RANGE
Jib , Tilt Angle 0-40°,Outriggers extended to minimum
Note: The above figures are based on no-load condition and do not include the deflection of the
boom
-11/W1006C2E-
CC
-1093
Heig
ht(
m)
Working Radius(m)
WORKING RANGE
Jib , Tilt Angle 40-60°,Outriggers extended to maximum, halfway and minimum
Note: The above figures are based on no-load condition and do not include the deflection of the
boom
-12/W1006C2E-
CC
-1093
Heig
ht(
m)
Working Radius(m)
WORKING RANGE
Pick & Carry
Note: ・The above figures are based on no-load condition and do not include the deflection of
the boom
・When the crane crawl , The loads not so up to keep the crane stability.
-13/W1006C2E-
CC
-1093
Heig
ht(
m)
Working Radius(m)
CC
-1093
NET RATED LOADS:
Main Boom / 4-Part line hook ・・・PROHIBITED AREA OF CRANE OPERATIONS
Boom-sections extended: ①
WORKING RADIUS (m) 2.5 3.0 3.3 3.5 4.0 4.58
NETRATEDLOAD
( t )
Outriggers extendedto maximum
10.0 10.0 8.8 7.6 6.3 5.0
Outriggers extendedto halfway
10.0 10.0 8.8 7.6 6.3 5.0
Outriggers extendedto minimum
10.0 10.0 8.8 7.6 6.3 5.0
Boom-sections extended: ①+②
WORKING RADIUS (m) 2.5 3.0 3.5 4.0 5.0 6.0 7.0 8.08
NETRATEDLOAD
( t )
Outriggers extendedto maximum
10.0 10.0 7.6 6.3 5.0 4.0 3.0 2.0
Outriggers extendedto halfway
10.0 10.0 7.6 6.3 4.8 3.65 2.7 1.7
Outriggers extendedto minimum
10.0 10.0 7.6 6.3 4.5 3.2 2.3 1.45
Boom-sections extended: ①+②+③
WORKING RADIUS (m) 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.58
NETRATEDLOAD
( t )
Outriggers extendedto maximum
5.7 4.7 3.8 3.0 2.25 1.7 1.4 1.0
Outriggers extendedto halfway
5.7 4.7 3.8 2.85 2.05 1.55 1.15 0.8
Outriggers extendedto minimum
5.7 4.5 3.45 2.45 1.7 1.2 0.85 0.47
Boom-sections extended: ①+②+③+④
WORKING RADIUS (m) 5.0 6.0 7.0 8.0 10.0 11.0 12.0 13.0 14.0 15.03
NETRATEDLOAD
( t )
Outriggers extendedto maximum
3.8 3.3 2.85 2.4 1.55 1.25 0.95 0.8 0.7 0.6
Outriggers extendedto halfway
3.8 3.3 2.85 2.4 1.55 1.15 0.88 0.7 0.55 0.4
Outriggers extendedto minimum
3.8 3.2 2.6 2.06 1.16 0.85 0.6 0.42 0.25 0.1
Boom-sections extended: ①+②+③+④+⑤
WORKING RADIUS (m) 6.0 8.0 10.0 12.0 14.0 15.0 16.0 17.0 18.0 18.48
NETRATEDLOAD
( t )
Outriggers extendedto maximum
2.8 2.2 1.65 1.15 0.8 0.65 0.55 0.45 0.35 0.3
Outriggers extendedto halfway
2.8 2.2 1.65 1.15 0.71 0.56 0.43 0.31 0.21 0.16
Outriggers extendedto minimum
2.8 2.0 1.33 0.81 0.47 0.34 0.21 0.07
Boom-sections extended: ①+②+③+④+⑤+⑥
WORKING RADIUS (m) 8.0 10.0 12.0 14.0 16.0 18.0 20.0 21.93
NETRATEDLOAD
( t )
Outriggers extendedto maximum
2.0 1.55 1.15 0.85 0.7 0.5 0.3 0.15
Outriggers extendedto halfway
2.0 1.55 1.15 0.78 0.47 0.23 0.08
Outriggers extendedto minimum
2.0 1.45 0.95 0.58 0.32 0.11
-14/W1006C2E-
CC
-1093
NET RATED LOADS:
Main Boom / 2-Part line hook ・・・PROHIBITED AREA OF CRANE OPERATIONS
Boom-sections extended: ①
WORKING RADIUS (m) 2.5 3.0 3.3 3.5 4.0 4.58
NETRATEDLOAD
( t )
Outriggers extendedto maximum
5.0 5.0 5.0 5.0 5.0 5.0
Outriggers extendedto halfway
5.0 5.0 5.0 5.0 5.0 5.0
Outriggers extendedto minimum
5.0 5.0 5.0 5.0 5.0 5.0
Boom-sections extended: ①+②
WORKING RADIUS (m) 2.5 3.0 3.5 4.0 5.0 6.0 7.0 8.08
NETRATEDLOAD
( t )
Outriggers extendedto maximum
5.0 5.0 5.0 5.0 5.0 4.0 3.0 2.0
Outriggers extendedto halfway
5.0 5.0 5.0 5.0 4.8 3.65 2.7 1.7
Outriggers extendedto minimum
5.0 5.0 5.0 5.0 4.5 3.2 2.3 1.45
Boom-sections extended: ①+②+③
WORKING RADIUS (m) 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.58
NETRATEDLOAD
( t )
Outriggers extendedto maximum
5.0 4.7 3.8 3.0 2.25 1.7 1.4 1.0
Outriggers extendedto halfway
5.0 4.7 3.8 2.85 2.05 1.55 1.15 0.8
Outriggers extendedto minimum
5.0 4.5 3.45 2.45 1.7 1.2 0.85 0.47
Boom-sections extended: ①+②+③+④
WORKING RADIUS (m) 5.0 6.0 7.0 8.0 10.0 11.0 12.0 13.0 14.0 15.03
NETRATEDLOAD
( t )
Outriggers extendedto maximum
3.8 3.3 2.85 2.4 1.55 1.25 0.95 0.8 0.7 0.6
Outriggers extendedto halfway
3.8 3.3 2.85 2.4 1.55 1.15 0.88 0.7 0.55 0.4
Outriggers extendedto minimum
3.8 3.2 2.6 2.06 1.16 0.85 0.6 0.42 0.25 0.1
Boom-sections extended: ①+②+③+④+⑤
WORKING RADIUS (m) 6.0 8.0 10.0 12.0 14.0 15.0 16.0 17.0 18.0 18.48
NETRATEDLOAD
( t )
Outriggers extendedto maximum
2.8 2.2 1.65 1.15 0.8 0.65 0.55 0.45 0.35 0.3
Outriggers extendedto halfway
2.8 2.2 1.65 1.15 0.71 0.56 0.43 0.31 0.21 0.16
Outriggers extendedto minimum
2.8 2.0 1.33 0.81 0.47 0.34 0.21 0.07
Boom-sections extended: ①+②+③+④+⑤+⑥
WORKING RADIUS (m) 8.0 10.0 12.0 14.0 16.0 18.0 20.0 21.93
NETRATEDLOAD
( t )
Outriggers extendedto maximum
2.0 1.55 1.15 0.85 0.7 0.5 0.3 0.15
Outriggers extendedto halfway
2.0 1.55 1.15 0.78 0.47 0.23 0.08
Outriggers extendedto minimum
2.0 1.45 0.95 0.58 0.32 0.11
-15/W1006C2E-
CC
-1093
NET RATED LOADS:
Main Boom / single line hook ・・・PROHIBITED AREA OF CRANE OPERATIONS
Boom-sections extended: ①
WORKING RADIUS (m) 2.5 3.0 3.3 3.5 4.0 4.58
NETRATEDLOAD
( t )
Outriggers extendedto maximum
2.0 2.0 2.0 2.0 2.0 2.0
Outriggers extendedto halfway
2.0 2.0 2.0 2.0 2.0 2.0
Outriggers extendedto minimum
2.0 2.0 2.0 2.0 2.0 2.0
Boom-sections extended: ①+②
WORKING RADIUS (m) 2.5 3.0 3.5 4.0 5.0 6.0 7.0 8.08
NETRATEDLOAD
( t )
Outriggers extendedto maximum
2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0
Outriggers extendedto halfway
2.0 2.0 2.0 2.0 2.0 2.0 2.0 1.7
Outriggers extendedto minimum
2.0 2.0 2.0 2.0 2.0 2.0 2.0 1.45
Boom-sections extended: ①+②+③
WORKING RADIUS (m) 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.58
NETRATEDLOAD
( t )
Outriggers extendedto maximum
2.0 2.0 2.0 2.0 2.0 1.7 1.4 1.0
Outriggers extendedto halfway
2.0 2.0 2.0 2.0 2.0 1.55 1.15 0.8
Outriggers extendedto minimum
2.0 2.0 2.0 2.0 1.7 1.2 0.85 0.47
Boom-sections extended: ①+②+③+④
WORKING RADIUS (m) 5.0 6.0 7.0 8.0 10.0 11.0 12.0 13.0 14.0 15.03
NETRATEDLOAD
( t )
Outriggers extendedto maximum
2.0 2.0 2.0 2.0 1.55 1.25 0.95 0.8 0.7 0.6
Outriggers extendedto halfway
2.0 2.0 2.0 2.0 1.55 1.15 0.88 0.7 0.55 0.4
Outriggers extendedto minimum
2.0 2.0 2.0 2.0 1.16 0.85 0.6 0.42 0.25 0.1
Boom-sections extended: ①+②+③+④+⑤
WORKING RADIUS (m) 6.0 8.0 10.0 12.0 14.0 15.0 16.0 17.0 18.0 18.48
NETRATEDLOAD
( t )
Outriggers extendedto maximum
2.0 2.0 1.65 1.15 0.8 0.65 0.55 0.45 0.35 0.3
Outriggers extendedto halfway
2.0 2.0 1.65 1.15 0.71 0.56 0.43 0.31 0.21 0.16
Outriggers extendedto minimum
2.0 2.0 1.33 0.81 0.47 0.34 0.21 0.07
Boom-sections extended: ①+②+③+④+⑤+⑥
WORKING RADIUS (m) 8.0 10.0 12.0 14.0 16.0 18.0 20.0 21.93
NETRATEDLOAD
( t )
Outriggers extendedto maximum
2.0 1.55 1.15 0.85 0.7 0.5 0.3 0.15
Outriggers extendedto halfway
2.0 1.55 1.15 0.78 0.47 0.23 0.08
Outriggers extendedto minimum
2.0 1.45 0.95 0.58 0.32 0.11
-16/W1006C2E-
JIBOutriggers extended to maximum
Outriggers extended to halfway
Outriggers extended to minimum
-17/W1006C2E-
MAIN BOOMANGLE
[°]
JIB① ( 4.73m) JIB② ( 7.87m )
TILT ANGLE [°] TILT ANGLE [°]
0 20 40 60 0 20 40 60
80 1000 850 700 610 1000 630 400 300
70 1000 850 700 610 1000 630 400 300
60 950 700 530 480 770 430 280 230
50 700 520 400 520 280 200
40 280 250 200 200 170 150
30
PROHIBITED AREAOF CRANE OPERATION
PROHIBITED AREAOF CRANE OPERATION
20
10
0
MAIN BOOMANGLE
[°]
JIB① ( 4.73m) JIB② ( 7.87m )
TILT ANGLE [°] TILT ANGLE [°]
0 20 40 60 0 20 40 60
80 1000 850 700 610 1000 630 400 300
70 1000 850 700 610 1000 630 400 300
60 950 700 530 480 700 430 280 230
50 420 400 400 350 350 200
40 200 200 180 130 130 130
30
PROHIBITED AREAOF CRANE OPERATION
PROHIBITED AREAOF CRANE OPERATION
20
10
0
MAIN BOOMANGLE
[°]
JIB① ( 4.73m) JIB② ( 7.87m )
TILT ANGLE [°] TILT ANGLE [°]
0 20 40 60 0 20 40 60
80 1000 850 700 610 1000 630 400 300
70 1000 850 700 610 1000 630 400 300
60 700 600 530 480 600 430 280 230
50 300 270 220 250 200 200
40
30
PROHIBITED AREAOF CRANE OPERATION
PROHIBITED AREAOF CRANE OPERATION
20
10
0
CC
-1093
CAUTION
1. Net rated loads are performance when the crane is placed level and is based on an actual
working radius including boom deflection under loaded.
Net rated loads are also based on strength and stability of the crane.
2. Net rated loads must be reduced in accordance with wind, ground condition and operating
speed.
3. Net rated loads are the lifting capacities except for the mass of hook.(4&2-part line :140kg)
(1-part line : 50kg)
4. When the outriggers are set without extending to their maximum, stability of the crane
deteriorates remarkably.
Pay attention that the net rated loads are changed according to how far the outriggers are
extended.
5. If any one of the four outriggers is not fully extended, operate with performance of not
maximum extension.
6. The mass of the slings and any accessories attached to the boom or load line must be
deducted from the above net rated loads in the chart.
7. In order to make correct operation, read the instruction manual carefully before crane
operation.
PICK & CARRY:
LIFTING CAPACITY: 1,640kg (Including mass of hook:140kg)
WORKING RADIUS: 2.5m
BOOM LENGTH: BOOM 1 and 1+2 only
-18/W1006C2E-
CC
-1093
-19/W1006C2E-
CC
-1093