62
Equipment Use In Occupancies

Speed Drill 50

  • Upload
    gracie

  • View
    29

  • Download
    0

Embed Size (px)

DESCRIPTION

Speed Drill 50. Equipment Use In Occupancies. - PowerPoint PPT Presentation

Citation preview

Page 1: Speed Drill 50

Equipment Use In Occupancies

Page 2: Speed Drill 50

A receptacle shall not be grouped or ganged in enclosures with other receptacles unless they are so arranged so that voltage between adjacent devices does not exceed __________________ volts unless they are installed in enclosures equipped with identified, securely installed barriers between adjacent devices.

Page 3: Speed Drill 50

300 Volts 406.4 (G)

Page 4: Speed Drill 50

Flexible, fine-stranded cables used in PV systems shall be terminated only with terminals, lugs, devices or connectors that are ____________________________.

Page 5: Speed Drill 50

Identified and listed for such use 690.31 (F)

Page 6: Speed Drill 50

A disconnecting means shall be provided for all ungrounded conductors derived from a stationary battery system over __________ volts.

Page 7: Speed Drill 50

30 volts 480.5

Page 8: Speed Drill 50

A clearly labeled emergency shutoff or control switch for the purpose of stopping the motors that provide power to the recirculation system and jet system shall be installed at a point readily accessible to the users and not less than _________ feet away if a spa is installed in other than a single family dwelling.

Page 9: Speed Drill 50

5 feet 680.41

Page 10: Speed Drill 50

A 125V, 20 ampere rated receptacle installed in an agricultural livestock holding area which has an equipotential plane installed shall not require GFCI protection.

True False

Page 11: Speed Drill 50

False 547.5 (G)(1)

Page 12: Speed Drill 50

A transformer insulated with a dielectric fluid indentified as nonflammable shall be permitted to be installed indoors or outdoors. Such transformers shall be installed in a vault if installed indoors and rated over ____________________ volts.

Page 13: Speed Drill 50

35000 volts 450.24

Page 14: Speed Drill 50

An electric radiant heating panel installed in poured concrete shall not exceed a rating of ___________ watts per square foot.

Page 15: Speed Drill 50

33 watts per square foot 424.98 (A)

Page 16: Speed Drill 50

The attachment plug cap for the power supply to a mobile home shall be a 3-pole, 4-wire, grounding type, rated _________ amperes if the mobile home is supplied with a power supply cord.

Page 17: Speed Drill 50

50 amperes 550.10 (A)

Page 18: Speed Drill 50

In one and two family dwellings, PV source circuits and PV output circuits that do not include lampholders, fixtures, or receptacles shall be permitted to have a maximum PV system voltage of ______________ volts.

Page 19: Speed Drill 50

600 Volts 690.7 (C)

Page 20: Speed Drill 50

In a Class I, Zone 0 hazardous location threaded entries into explosion proof or flame proof equipment by rigid metallic conduit shall be made up with at least ____________ threads fully engaged.

Page 21: Speed Drill 50

Five threads 505.9 (E)

Page 22: Speed Drill 50

When flexible cords are installed in an ambient temperature in excess of ________ degrees Fahrenheit, the ampacity of the conductors of the cord shall be derated.

Page 23: Speed Drill 50

86 degree F 400.5(A)

Page 24: Speed Drill 50

Panelboards equipped with snap switches rated at 30 amperes or less shall have a maximum overcurrent protection of _____________ amperes.

Page 25: Speed Drill 50

200 amperes 408.36 (A)

Page 26: Speed Drill 50

Fixed outdoor electric deicing and snow-melting equipment shall be considered as a ____________________ load.

Page 27: Speed Drill 50

Continuous 426.4

Page 28: Speed Drill 50

The maximum length of an extra hard usage type, 12 AWG flexible cord that will provide interconnection of partitions for office furniture shall be __________ feet.

Page 29: Speed Drill 50

2 feet 605.4 (3)

Page 30: Speed Drill 50

The minimum length of flexible cord used to provide power to a cord and plug connected, permanently installed trash compactor in a single family dwelling is ______________.

Page 31: Speed Drill 50

3 feet 422.16 (B)(2)(2)

Page 32: Speed Drill 50

STOP

End of Timed Drill

The drill slides will now be repeated without the timer. Left click on the presentation to advance to the next slide.

Page 33: Speed Drill 50

A receptacle shall not be grouped or ganged in enclosures with other receptacles unless they are so arranged so that voltage between adjacent devices does not exceed __________________ volts unless they are installed in enclosures equipped with identified, securely installed barriers between adjacent devices.

Page 34: Speed Drill 50

300 Volts 406.4 (G)

Page 35: Speed Drill 50

Flexible, fine-stranded cables used in PV systems shall be terminated only with terminals, lugs, devices or connectors that are ____________________________.

Page 36: Speed Drill 50

Identified and listed for such use 690.31 (F)

Page 37: Speed Drill 50

A disconnecting means shall be provided for all ungrounded conductors derived from a stationary battery system over __________ volts.

Page 38: Speed Drill 50

30 volts 480.5

Page 39: Speed Drill 50

A clearly labeled emergency shutoff or control switch for the purpose of stopping the motors that provide power to the recirculation system and jet system shall be installed at a point readily accessible to the users and not less than _________ feet away if a spa is installed in other than a single family dwelling.

Page 40: Speed Drill 50

5 feet 680.41

Page 41: Speed Drill 50

A 125V, 20 ampere rated receptacle installed in an agricultural livestock holding area which has an equipotential plane installed shall not require GFCI protection.

True False

Page 42: Speed Drill 50

False 547.5 (G)(1)

Page 43: Speed Drill 50

A transformer insulated with a dielectric fluid indentified as nonflammable shall be permitted to be installed indoors or outdoors. Such transformers shall be installed in a vault if installed indoors and rated over ____________________ volts.

Page 44: Speed Drill 50

35000 volts 450.24

Page 45: Speed Drill 50

An electric radiant heating panel installed in poured concrete shall not exceed a rating of ___________ watts per square foot.

Page 46: Speed Drill 50

33 watts per square foot 424.98 (A)

Page 47: Speed Drill 50

The attachment plug cap for the power supply to a mobile home shall be a 3-pole, 4-wire, grounding type, rated _________ amperes if the mobile home is supplied with a power supply cord.

Page 48: Speed Drill 50

50 amperes 550.10 (A)

Page 49: Speed Drill 50

In one and two family dwellings, PV source circuits and PV output circuits that do not include lampholders, fixtures, or receptacles shall be permitted to have a maximum PV system voltage of ______________ volts.

Page 50: Speed Drill 50

600 Volts 690.7 (C)

Page 51: Speed Drill 50

In a Class I, Zone 0 hazardous location threaded entries into explosion proof or flame proof equipment by rigid metallic conduit shall be made up with at least ____________ threads fully engaged.

Page 52: Speed Drill 50

Five threads 505.9 (E)

Page 53: Speed Drill 50

When flexible cords are installed in an ambient temperature in excess of ________ degrees Fahrenheit, the ampacity of the conductors of the cord shall be derated.

Page 54: Speed Drill 50

86 degree F 400.5(A)

Page 55: Speed Drill 50

Panelboards equipped with snap switches rated at 30 amperes or less shall have a maximum overcurrent protection of _____________ amperes.

Page 56: Speed Drill 50

200 amperes 408.36 (A)

Page 57: Speed Drill 50

Fixed outdoor electric deicing and snow-melting equipment shall be considered as a ____________________ load.

Page 58: Speed Drill 50

Continuous 426.4

Page 59: Speed Drill 50

The maximum length of an extra hard usage type, 12 AWG flexible cord that will provide interconnection of partitions for office furniture shall be __________ feet.

Page 60: Speed Drill 50

2 feet 605.4 (3)

Page 61: Speed Drill 50

The minimum length of flexible cord used to provide power to a cord and plug connected, permanently installed trash compactor in a single family dwelling is ______________.

Page 62: Speed Drill 50

3 feet 422.16 (B)(2)(2)