SS/262XC 1 2600T Series Pressure Transmitters ANSI/ISA–S 82.03 hydrostatic test requirements and SAMA PMC 27.1. Environmental limits Electromagnetic compatibility

Data SheetSS/262XC_1

ABB 2600T SeriesEngineered solutions

for all applications

Base accuracy : ±0.15%

Span limits– 0.54 to 16000kPa; 2.14inH2O to 2320psi– 2.67 to 16000kPa abs; 20mmHg to 2320psia

Reliable sensing system coupled with very latestdigital technologies

Comprehensive sensor choice– optimize in-use total performance and stability

5–year stability

Flexible configuration facilities– provided locally via local keys combined with LCD

indicator or via hand held terminal orPC configuration platform

Multiple protocol availability– provides integration with HART®, PROFIBUS PA

and FOUNDATION Fieldbus platforms offeringinterchangeability and transmitter upgradecapabilities

Broad selection of variants, options, fill fluidsand wetted materials– allows total flexibility maximizing cost-effective

aspect, also providing applications with criticalprocess media at extended temperature range

PED compliance to sound engineering practice(SEP)

FieldIT

2600T Series Pressure Transmitters

Model 262DC Differential/Gauge Model 262HC Gauge

Model 262NC Absolutewith flanged direct mount seal

2600T Pressure TransmittersModel 262DC, 262HC, 262NC SS/262XC_1

2

Functional SpecificationsRange and span limits

General DescriptionModel 262DC and 262HC/NC detailed in this data sheet apply for thosetransmitters which include on high pressure measuring side, a directmount seal which is integral to the transducer by a short capillaryconnection inside a protective rigid tube.This construction forms a standalone single assembly suitable to bemounted to the process by the seal mounting facilities.By properly selecting the high and low pressure side variant in the orderingcodes model 262DC can be in the following versions :a) one direct mount seal and one flange for process connection, 1/4in NPT

direct or 1/2in NPT through adapter; this allows also to connect the otherleg (wet or dry) for differential measurement.A proper filter is supplied as standard when 1/4in NPT connection isselected, in order to plug the unused entry, leaving it vented for gaugemeasurement with reference to atmosphere.

b) one direct mount seal and one remote seal with capillary; the two sealsallow again a differential measurement and must be selected of sametype/size.

The combinations sensor code/seal type marked (•) modify the base accuracy rating and static pressure effect; refer to performance specifications.

ALL AVAILABLE SEALS FOR DIRECT MOUNT ARE SUITABLE FOR LISTED RANGES OF MODELS 262HC/NC WITHOUT LIMITATION.

(§) Double the value with inert filling

Model 262HC and 262NC have the direct mount seal on the positive side,respectively with the reference at atmospheric or vacuum pressure, forgauge or absolute measurements. Allowed types of direct mount seal arethose mainly used for chemical application:- flush diaphragm flange mounted seal- extended diaphragm flange mounted sealThese are suitable also for other process applications including food andsanitary, using FDA approved filling, which are defined as food fills and areGenerally Recognized As Safe (GRAS) by the US Food and DrugAdministration (FDA).Refer to seal data sheet for all data and details relevant to seal element.The following table list the types of standard seal which can be mountedwith 262DC/HC/NC transmitters (the mnemonic is used as reference in thecompatibility table).

epytlaeS eziS cinomenM

degnalFmgarhpaidhsulf

05ND/ni2001-08ND/ni4-3

2P3P

degnalFdednetxemgarhpaid

05ND/ni208ND/ni3001ND/ni4

2E3E3P

rosneSedoC

egnaRreppU)LRU(timiL

)LRL(timiLegnaRrewoLmuminiM

naps

)CD262roflaesdewolla(ytilibitapmoCCD262

tnuomtceriDlaitnereffid

CD262tnuomtceriD

eguag

CN/CH262tnuomtceriDetulosba/eguag

tnuomtceriDylnolaes

dnatnuomtceriDlaesetomereno).mnihtgnelxam(

EaPk61

rabm061Hni46 2O

aPk61–rabm061–

Hni46– 2O

aPk61–rabm061–

Hni46– 2O

aPk45.0rabm4.5

Hni41.2 2O

3P,)•(2P)•(3E

)3(3P)•()2(3E

FaPk04

rabm004Hni061 2O

aPk04–rabm004–

Hni061– 2O

aPk04–rabm004–

Hni061– 2O

aPk76.0rabm7.6

Hni76.2 2O

3P,2P3E,)•(2E

)5(3P,)•()2(2P)3(3E

GaPk56

rabm056Hni062 2O

aPk56–rabm056–

Hni062– 2O

aPk56–rabm056–

Hni062– 2O

aPk1.1rabm11

Hni53.4 2O

3P,2P3E,)•(2E

)5(3P,)•()2(2P)3(3E

HaPk061

rabm0061Hni246 2O

aPk061–rabm0061–

Hni246– 2O

)§(sbaaPk70.0)§(sbarabm7.0

)§(gHmm5.0


)§(gHmm5.0

aPk76.2rabm7.62

Hni7.01 2O

3P,2P3E,2E

)8(3P,)5(2P)6(3E,)4(2E

MaPk006

rab6isp78

aPk006–rab6–isp78–


)§(gHmm5.0


)§(gHmm5.0

aPk01rab1.0isp54.1

3P,2P3E,2E

)8(3P,)8(2P)8(3E,)6(2E

PaPk0042

rab42isp843

aPk0042–rab42–isp843–


)§(gHmm5.0


)§(gHmm5.0

aPk04rab4.0isp8.5

3P,2P3E,2E

)8(3P,)8(2P)8(3E,)6(2E

QaPk0008

rab08isp0611

aPk0008–rab08–

isp0611–


)§(gHmm5.0


)§(gHmm5.0

aPk431rab43.1isp4.91

3P,2P3E,2E

)8(3P,)8(2P)8(3E,)6(2E

SaPk00061

rab061isp0232

aPk00061–rab061–isp0232–


)§(gHmm5.0


)§(gHmm5.0

aPk762rab76.2isp7.83

3P,2P3E,2E

)8(3P,)8(2P)8(3E,)6(2E

All following specification data apply for identical characteristics of the two seals when the transmitter has the remote seal in addition to the direct mount one.


3

Operative limits

Temperature limits °C (°F) :

Ambient (is the operating temperature)

Lower ambient limit for LCD indicators: –20°C (–4°F)

Upper ambient limit for CoMeter and ProMeter : +70°C (+158°F)

Note : For Hazardous Atmosphere applications see the temperaturerange specified on the certificate/approval relevant to theaimed type of protection

Process

Lower limit (low pressure side 262DC only)

– refer to lower ambient limits; –20°C (–4°F) for Viton gasket

Upper limit (low pressure side 262DC only)

– Silicone oil and ABB fill: 121°C (250°F) (1)

– Inert fluid: 100°C (212°F) (2)

(1) 100°C (212°F) for application below atmospheric pressure

(2) 65°C (150°F) for application below atmospheric pressure

The following table show characteristics of fill fluids when used intransmitters with direct mount seal on high pressure side.

Storage

Lower limit: –50°C (–58°F); –40°C (–40°F) for LCD indicators

Upper limit: +85°C (+185°F)

Span limits

Maximum span = URL(can be further adjusted up to ± URL (TD = 0.5) for differentialmodels, within the range limits)

IT IS RECOMMENDED TO SELECT THE TRANSMITTER SENSORCODE PROVIDING THE TURNDOWN VALUE AS LOWEST ASPOSSIBLE TO OPTIMIZE PERFORMANCE CHARACTERISTICS.

Zero suppression and elevation

Zero and span can be adjusted to any value within the range limitsdetailed in the table as long as:

– calibrated span ≥ minimum span

DampingSelectable time constant : 0, 0.25, 0.5, 1, 2, 4, 8 or 16s.This is in addition to sensor response time

Turn on time

Operation within specification in less than 1s with minimumdamping.

Insulation resistance

> 100MΩ at 1000VDC (terminals to earth)

SDIULFLLIFNOITACILPPA(

SNOITIDNOCGNITAREPO

xamTfo>sbaP@

nimPsbarabm

)aisp(

xamTnimP@

nimT

™002CD-lioenociliS)esopruplareneG(

)093(002rabm53@

7.0)10.0(

061)023(

04–)04–(

™041NA-lioenociliS))erutarepmethgiH(

)084(052rabm7.0@

7.0)10.0(

052)084(

5–)32+(

™TLXmrehtlyS–remyloPenociliS)erutarepmetwoL(

)212(001rabm011@

2)30.0(

02)86(

001–)841–(

™02-MeeboeN-lioelbategeVADF)yratinaS-dooF(

)093(002rab1@

031)9.1(

051)003(

81-)0(

)%07(retaWnirecylGADF)yratinaS-dooF(

)002(39rab1@

0001)5.41(

39)002(

7–)02+(

™28LOCRAM-liolareniMADF)yratinaS-dooF(

)093(002rabm002@

33)5.0(

04)401(

04–)04–(

™nedlaG–trenI)ecivreSnegyxO(

)023(061rab1@

7.0)10.0(

56)051(

81–)0(

llifBBA)slaicepsdnastniaP(

)084(052rabm53@

7.0)10.0(

061)023(

01–)41+(

gnilliFCD262sledoM CN/CH262sledoM

srosneSSotF

ErosneSsrosneS

SotHlioenociliS

™002CD58+dna04–

)581+dna04–(58+dna52–

)581+dna31–(58+dna04–

)581+dna04–(trenI

™nedlaG58+dna02–)581+dna4–(

58+dna01–)581+dna41+(

58+dna02–)581+dna4–(

llifBBA 58+dna02–)581+dna4–(

58+dna01–)581+dna41+(

58+dna04–)581+dna04–(


4

Pressure limits

Overpressure limits (without damage to the transmitter)

0.067kPa abs, 0.67mbar abs, 0.01psia (double with inert filling) totransmitter sensor limit or flange rating of seal, whichever is less:

– 16MPa, 160bar, 2320psi for all sensor codes of model 262DC

– 21MPa, 210bar, 3045psi for all sensor codes of models 262HC/NC

– 2MPa, 20bar, 290psi for ANSI CL 150 flange


– 10MPa, 100bar, 1450psi for ANSI CL600 flange


– 1.6MPa, 16bar, 230psi for DIN PN 16 flange

– 4MPa, 40bar, 580psi for DIN PN 40 flange

– 6.4MPa, 64bar, 930psi for DIN PN 64 flange



Static pressure

Transmitters for differential pressure model 262DC operates withinspecifications between the following limits:

– 1.3kPa abs,13mbar abs, 0.2psia and 16MPa, 160bar, 2320psi orflange rating of seal as above, whichever is less

– 0.067kPa abs, 0.67mbar abs, 0.01psia and 16MPa,160bar,2320psi or flange rating of seal as above, whichever is less, usinga second seal remote on negative pressure side.

Proof pressure

The transmitter can be exposed without leaking to line pressure of up to:

– 28MPa, 280bar, 4000psi for model 262DC

– 40MPa, 400bar, 5900psi for model 262HC/NC

or two times the flange rating of seal, whichever is less.

Meet ANSI/ISA–S 82.03 hydrostatic test requirements and SAMA PMC27.1.

Environmental limits

Electromagnetic compatibility (EMC)

Comply with EN 61000–6–3 for emission and EN 61000–6–2 forimmunity requirements and test;

Radiated electromagnetic immunity level: 30V/m(according to IEC 1000–4–3, EN61000–4–3)

Conducted electromagnetic immunity level : 30V(according to IEC 1000–4-6, EN 61000–4–6)

Surge immunity level (with surge protector): 4kV(according to IEC 1000-4–5 EN 61000–4–5)

Fast transient (Burst) immunity level: 4kV(according to IEC 1000–4–4 EN 61000–4–4)

Pressure equipment directive (PED)

Comply with 97/23/EEC following sound engineering practice (SEP).

Humidity

Relative humidity: up to 100% annual average

Condensing, icing: admissible

Vibration resistance

Accelerations up to 2g at frequency up to 1000Hz(according to IEC 60068–2–26)

Shock resistance (according to IEC 60068-2-27)

Acceleration: 50g

Duration: 11ms

Wet and dust-laden atmospheres

The transmitter is dust and sand tight and protected against immersioneffects as defined by EN 60529 (1989) to IP 67 (IP 68 on request) or byNEMA to 4X or by JIS to C0920.

Hazardous atmospheres

With or without output meter/integral display– INTRINSIC SAFETY/EUROPE:

ATEX/ZELM approvalEC-Type Examination Certificate no. ZELM 02 ATEX 0081 (HART)II 1 GD T50°C, EEx ia IIC T6 (–40°C ≤ Ta ≤+40°C)T95°C, EEx ia IIC T4 (–40°C ≤ Ta ≤+85°C)(FOUNDATION Fieldbus/PROFIBUS PA–FISCO): pending

– TYPE "N"/EUROPE:ATEX/ZELM type examination :Design compliance by certificate no. ZELM 02 ATEX 3088 (HART)II 3 GD T50°C, EEx nL IIC T6 (–40°C ≤ Ta ≤+40°C)

T95°C, EEx nL IIC T4 (–40°C ≤ Ta ≤+85°C)(FOUNDATION Fieldbus/PROFIBUS PA): pending

– FLAMEPROOF/EUROPE:ATEX/CESI approvalEC–Type Examination Certificate no. CESI 02 ATEX 027II 1/2 GD T85°C, EEx d IIC T6 (–40°C ≤ Ta ≤ +75°C)

– CANADIAN STANDARDS ASSOCIATIONand FACTORY MUTUAL: pending– Explosionproof: Class I, Div. 1, Groups A, B, C, D– Dust ignitionproof : Class II, Div. 1, Groups E, F, G– Suitable for : Class II, Div. 2, Groups F, G; Class III, Div. 1, 2– Nonincendive: Class I, Div. 2, Groups A, B, C, D– Intrinsically safe: Class I, II, III, Div. 1, Groups A, B, C, D, E, F, G

AEx ia IIC T6/T4, Zone 0 (FM)– STANDARDS AUSTRALIA (SAA): pending

TS/WCA ApprovalEx d IIC T5 (Tamb +85°C)/T6 (Tamb +70°C) Class 1 Zone 1;Ex ia IIC T4 (Tamb +85°C) /T5 (Tamb +55°C) T6 Class 1 Zone 0


5

Optional surge protection

Up to 4kV

– voltage 1.2 µs rise time / 50 µs delay time to half value

– current 8 µs rise time / 20 µs delay time to half value

Output signal

Two–wire 4 to 20mA, user-selectable for linear or square root output,power of 3/2 or 5/2, 5th order or two 2nd order switching point selectableprogrammable polynomial output.

HART® communication provides digital process variable (%, mA orengineering units) superimposed on 4 to 20mA signal, with protocolbased on Bell 202 FSK standard.

Output current limits (to NAMUR standard)

Overload condition

- Lower limit: 3.8mA

- Upper limit: 20.5mA

Transmitter failure mode (to NAMUR standard)

The output signal can be user-selected to a value of 3.7 or 22mA ongross transmitter failure condition, detected by self-diagnostics.

In case of CPU failure the output is driven <3.7mA or >22mA.

Electrical Characteristics and Options

HART digital communication and 4 to 20mA output

Power Supply

The transmitter operates from 10.5 to 42VDC with no load and isprotected against reverse polarity connection (additional load allowsoperations over 42VDC).

For EEx ia and other intrinsically safe approval power supply mustnot exceed 30VDC.

Ripple

20mV max on a 250Ω load as per HART specifications

Load limitations

4 to 20mA and HART total loop resistance :

A minimum of 250Ω is required for HART communication.

Optional indicators

Output meter

CoMeter and Prometer :

5-digit (±99999 counts) programmable with 7.6mm. high (3in),7-segment numeric characters plus sign and digital point for digitalindication of output value in percentage, current or engineer unit;

10-segment bargraph display (10% per segment) for analogindication of output in percentage;

7-digit LCD with 6mm. high (2.3in), 14-segment alphanumericcharacters, for engineer units and configuration display

Analog : 36mm (1.4in) scale on 90°.

Integral display

LCD, 15 lines x 56 column dot matrix providing 2 lines indication as

– top: 5-digit (numeric) plus sign or 7-digit alphanumeric

– bottom: 7-digit alphanumeric

and additional 50-segment bargraph for indication of analog outputin percentage.

User-definable matrix display mode with HART communication:

– process variable in pressure unit or

– output signal as percentage, current or engineering units

Display also indicates in/out transfer function, static pressure, sensortemperature and diagnostic messages and provides configurationfacilities.

R(kΩ) =Supply voltage – min. operating voltage (VDC)–––––––––––––––––––––––––––––––––––––––

22.5

(volts)

MINIMUM OPERATING VOLTAGES

10.5

with integral display

with optional output analog indicator

with optional surge protection

with ProMeter output indicator

10.7 12.3 12.5

no link on output indicator plugs

15.3

with CoMeter indicator and HART communication

13.3


6

PROFIBUS PA output

Device type

Pressure transmitter compliant to Profiles 3.0 Class A & B; ident.number 052B HEX.

Power supply

The transmitter operates from 10.5 to 32VDC , polarity independent.

For EEx ia approval power supply must not exceed 17.5VDC.Intrinsic safety installation according to FISCO model.

Current consumptionoperating (quiescent): 10.5mA

fault current limiting: 20mA max.

Output signal

Physical layer in compliance to IEC 1158–2/EN 61158–2 withtransmission to Manchester II modulation, at 31.25kbit/sec.

Output interface

PROFIBUS PA communication according to Profibus DP50170 Part 2/DIN 19245 part 1–3.

Output update time

25ms

Function blocks

2 analog input, 1 transducer, 1 physical

Integral display




and additional 50-segment bargraph for indication of output inpercentage of the analog input function block assigned to the primaryvariable.

User-definable matrix display mode:

– process variable in pressure units or

– primary variable in engineering units (output of transducer block) or

– output as percentage or engineering units of analog input functionblocks

Display also indicates diagnostic messages and providesconfiguration facilities.Secondary variable, static pressure and sensor temperature can beread.

Transmitter failure mode

On gross transmitter failure condition, detected by self-diagnostics,the output signal can be driven to defined conditions, selectable by theuser as safe, last valid or calculated value. If electronic failure or shortcircuit occur the transmitter consumption is electronically limited at adefined value (20mA approx), for safety of the network.

FOUNDATION Fieldbus output

Device type

LINK MASTER DEVICE

Link Active Scheduler (LAS) capability implemented.

Power supply

The transmitter operates from 9 to 32VDC, polarity independent.

For EEx ia approval power supply must not exceed 24VDC (entitycertification) or 17.5VDC (FISCO certification), according to FF–816.

Current consumption

operating (quiescent): 10.5mA

fault current limiting: 20mA max.

Output signal

Physical layer in compliance to IEC 1158–2/EN 61158–2 withtransmission to Manchester II modulation, at 31.25kbit/sec.

Function blocks/execution period

2 standard Analog Input blocks/25ms max (each)

1 standard PID block/70ms max.

Additional blocks

1 standard Resource block,

1 custom Pressure with calibration transducer block.

Number of link objects25

Number of VCRs

24

Output interface

FOUNDATION fieldbus digital communication protocol to standard H1,compliant to specification V. 1.5; FF registration in progress.

Integral display




and additional 50-segment bargraph for indication of output inpercentage of the analog input function block assigned to the primaryvariable.

User-definable matrix display mode:

– process variable in pressure units or

– primary variable in engineering units (output of transducer block) or

– output as percentage or engineering units of analog input functionblocks

Display also indicates diagnostic messages and providesconfiguration facilities.Secondary variable, static pressure and sensor temperature can beread.

Transmitter failure mode

The output signal is "frozen" to the last valid value on gross transmitterfailure condition, detected by self-diagnostics which also indicate aBAD conditions. If electronic failure or short circuit occur the transmitterconsumption is electronically limited at a defined value (20mA approx),for safety of the network.


7

Operating influences

Temperature effects

per 20K (36°F) ambient temperature change on transmitter sensorbetween the limits of –20°C to +65°C (–4 to +150°F) :

per 20K (36°F) process temperature change on seal diaphragmbetween the process operating temperature limits

Optional CoMeter and ProMeter ambient temperature

Total reading error per 20K (36°F) change between the ambient limitsof –20 and +70°C (-4 and +158°F) :

±0.15% of max span (16mA).

Static pressure (zero errors can be calibrated out at line pressure)

seal effect additional to transmitter sensor effect applicable fordifferential measurement per 2MPa, 20bar or 290psi.

Model 262DC direct mount seal only– zero error: ±0.22% of URL– span error: ±0.22% of readingModel 262DC direct mount plus remote seal– zero error: ±0.30% of URL– span error: ±0.30% of readingMultiply by 1.5 the errors for sensor seal combinations marked (•).

Supply voltage

Within voltage/load specified limits the total effect is less than0.005% of URL per volt.

Load

Within load/voltage specified limits the total effect is negligible.

Radio frequency interference

Total effect : less than 0.10% of span from 20 to 1000MHz and forfield strengths up to 30V/m when tested with shielded conduit andgrounding, with or without meter.

Common mode interference

No effect from 100Vrms @ 50Hz, or 50VDC

Vibration effect

±0.10% of URL (according to IEC 61298–3)

URLSpan

URLSpan

URLSpan

Performance specificationsStated at reference condition to IEC 60770 ambient temperature of 20°C(68°F), relative humidity of 65%, atmospheric pressure of 1013hPa(1013mbar), mounting position with vertical diaphragm and zero basedrange for transmitter with isolating diaphragms in AISI 316 L ss or Hastelloyand silicone oil fill or ABB fill and HART digital trim values equal to 4–20mAspan end points, in linear mode.

Unless otherwise specified, errors are quoted as % of span.

Some performance data are affected by the actual turndown (TD) as ratiobetween Upper Range Limit (URL) and calibrated span.

IT IS RECOMMENDED TO SELECT THE TRANSMITTER SENSOR CODEPROVIDING THE TURNDOWN VALUE AS LOWEST AS POSSIBLE TOOPTIMIZE PERFORMANCE CHARACTERISTICS.

Accuracy rating% of calibrated span, including combined effects of terminal basedlinearity, hysteresis and repeatability.

For fieldbus versions SPAN refer to analog input function block outscalerange

Using direct mount seal sizes <DN 80/3in– ±0.15% for TD from 1:1 to 10:1

(±0.20% for sensor code F ±0.20% for sensor code E for TD from 1:1 to 5:1)

– ±0.015% x for TD from 10:1 to 20:1

(±0.02% x for sensor code F

±0.04% x for sensor code E for TD from 5:1 to 10:1)

Using direct mount seal sizes ≥DN 80/3in– ±0.15% for TD from 1:1 to 10:1

(±0.20% for sensor code E for TD from 1:1 to 5:1)

– ±0.015% x for TD from 10:1 to 20:1

(±0.04% x for sensor code E for TD from 5:1 to 10:1)

Multiply the values by 1.5 for sensor/seal combination marked (•) and fortransmitter with direct mount seal plus one remote seal.

URLSpan

URLSpan

ezisepytlaeSrorrE

aPk rabm Hni 20

05ND/ni2hsulF 51.0 5.1 6.0

001–08ND/ni4–3hsulF 320.0 32.0 90.0

05ND/ni2dednetxE 42.0 4.2 69.0


001ND/ni4dednetxE 320.0 32.0 90.0

ezisepytlaeSrorrE

aPk rabm Hni 20

05ND/ni2hsulF 84.0 8.4 29.1

001–08ND/ni4–3hsulF 51.0 5.1 6.0


08ND/ni3dednetxE 52.0 5.2 1



8

Physical Specification(Refer to ordering information sheets for variant availability related tospecific model or versions code)

Materials

Model 262DC only

Low pressure side process isolating diaphragms (*)

AISI 316 L ss; Hastelloy C276™; Monel 400™; Tantalum;

Hastelloy C276™ on AISI 316 L ss gasket seat.

A remote seal can be selected with required diaphragm (refer to highpressure side).

Low pressure side process flanges, adapters, plugs and drain/ventvalves (*)

AISI 316 L ss; Hastelloy C276™; Monel 400™.

Bolts and nuts

AISI 316 ss bolts and nuts Class A4–50 per UNI 7323 (ISO 3506), incompliance with NACE MR0175 Class II.

Gaskets (*)

Viton™; PTFE.

Model 262DC/HC/NC

High pressure side process diaphragm (direct mount seal) (*)

AISI 316 L ss; Hastelloy C276™ , Tantalum;

AISI 316 L ss or Hastelloy C276™ with anti-stick coating;

AISI 316 L ss with anti-corrosion coating.

Extension material

AISI 316 L ss; Hastelloy C276™; AISI 316 L ss or Hastelloy C276™with coating same as diaphragm.

High pressure side fill fluid (direct mount seal)

Silicone oil-DC200™, Silicone oil-AN 140™, Inert-Galden™,SIlicone Polymer-Syltherm XLT™, Vegetable oil-Neobee M-20™,Glycerin Water, Mineral oil-MARCOL 82™, ABB fill.

Sensor fill fluid

Silicone oil (DC200); inert fill (perfluorinated polyethers Galden™);"process-inert" fill (ABB fill).

Sensor housing

AISI 316 L ss.

Electronic housing and covers

Barrel version

– Copper-free content aluminium alloy with baked epoxy finish;

– Low-copper content aluminium alloy with baked epoxy finish;

– AISI 316 L ss.

DIN version

– Low-copper content aluminium alloy with baked epoxy finish.

Covers O-ring

Buna N.

Local zero and span adjustments:

Glass filled polycarbonate plastic (removable).

Tagging

AISI 316ss data plate attached to the electronics housing.


9

CalibrationStandard: at maximum span, zero based range, ambient temperatureand pressure;

Optional: at specified range and ambient conditions.

Optional extras

Output indicator

plug-in rotatable type, LCD or analog.

Supplemental customer tag

AISI 316 ss tag screwed/fastened to the transmitter for customer's tagdata up to a maximum of 20 characters and spaces on one line for tagnumber and tag name, and up to a maximum of 3 spaced strings of 10characters each for calibration details (lower and upper values plusunit). Special typing evaluated on request for charges.

Surge protection (only as external unit for PROFIBUS PA and FF)

Cleaning procedure for oxygen service

Hydrogen or special service preparation

Test Certificates (test, design, calibration, material traceability)

Tag and manual language

Communication connectors

Process connectionson conventional flanges : 1/4in NPT on process axis

on adapters : 1/2in NPT on process axis

fixing threads: 7/16in–20 UNF at 41.3mm centre distance

on mounting flange (seal side)

Flush diaphragm flanged seal (**):2in or 3in ANSI 150 to 900 RF; 4in ANSI 150-300RF.DN50 or DN80 DIN PN16–40 Form C, PN64–160 Form E;DN100 ND 16 – 40 Form C.

Extended diaphragm flanged seal (**):2in, 3in, 4in ANSI 150 - 300 RF.DN50, DN80, DN100 PN16 – 40 Form C.

Electrical connectionsTwo 1/2 NPT or M20x1.5 or PG 13.5 or 1/2 GK threaded conduitentries, direct on housing.

Special communication connector (on request)

– HART : straight or angle Harting HAN connector and one plug.

– FOUNDATION Fieldbus, PROFIBUS PA: M12x1 or 7/8.

Terminal block

HART version: three terminals for signal/external meter wiring up to2.5mm2 (14AWG) and three connection points for test andcommunication purposes.

Fieldbus versions: two terminals for signal wiring (bus connection)up to 2.5mm2 (14AWG)

Grounding

Internal and external 6mm2 (10AWG) ground termination points areprovided.

Mounting positionTransmitter can be mounted in any position.Electronics housing may be rotated to any position. A positive stopprevents over travel.

Mass (without options)7kg to 30kg approx (15 to 65lb) according to specified seal(s)options; add 1.5kg (3.4lb) for AISI housing.Add 650g (1.5lb) for packing.

PackingCarton


10

ConfigurationTransmitter with HART communication and 4 to 20 mA

Standard configuration

Transmitters are factory calibrated to customer's specified range.Calibrated range and tag number are stamped on the tag plate. If acalibration range and tag data are not specified, the transmitter will besupplied with the plate left blank and configured as follows:

Engineering Unit Specify from table4 mA Zero20 mA Upper Range Limit (URL)Output LinearDamping 1 sec.Transmitter failure mode UpscaleSoftware tag characters BlankOptional LCD output indicator 0 to 100.0% linear

Any or all the above configurable parameters, including Lowerrange–value and Upper range-value which must be the same unit ofmeasure, can be easily changed using the HART hand–heldcommunicator. The transmitter database is customized with specifiedflange type and material, O–ring and drain/vent materials and meter codeoption.Custom configuration (option)The following data may be specified in addition to the standardconfiguration parameters:

Descriptor 16 alphanumeric charactersMessage 32 alphanumeric charactersDate Day, month, year

Transmitter with PROFIBUS PA communicationTransmitters are factory calibrated to customer's specified range.Calibrated range and tag number are stamped on the tag plate. If acalibration range and tag data are not specified, the transmitter will besupplied with the plate left blank and configured as follows:

Measure Profile PressureEngineering Unit kPaOutput scale 0% Lower Range Limit (LRL)Output scale 100% Upper Range Limit (URL)Output LinearHi-Hi Limit Upper Range Limit (URL)Hi Limit Upper Range Limit (URL)Low Limit Lower Range Limit (LRL)Low-Low Limit Lower Range Limit (LRL)Limits hysteresis 0.5% of output scalePV filter 0 sec.Address (settable by local key) 126Tag 32 alphanumeric characters

Any or all the above configurable parameters, including Lower range-valueand Upper range–value which must be the same unit of measure, can beeasily changed by a PC running the configuration software Smart Visionwith DTM for 2600T.The transmitter database is customized with specified flange type andmaterial, O–ring and drain/vent materials and meter code option.Custom configuration (option)The following data may be specified in addition to the standardconfiguration parameters:

Descriptor 32 alphanumeric charactersMessage 32 alphanumeric charactersDate Day, month, year

Transmitter with FOUNDATION FieldbuscommunicationTransmitters are factory calibrated to customer's specified range.Calibrated range and tag number are stamped on the tag plate. If acalibration range and tag data are not specified, the transmitter will besupplied with the plate left blank and the analog input function block FB1is configured as follows:

Measure Profile PressureEngineering Unit kPaOutput scale 0% Lower Range Limit (LRL)Output scale 100% Upper Range Limit (URL)Output LinearHi-Hi Limit Upper Range Limit (URL)Hi Limit : Upper Range Limit (URL)Low Limit Lower Range Limit (LRL)Low-Low Limit Lower Range Limit (LRL)Limits hysteresis 0.5% of output scalePV filter time 0 sec.Tag 32 alphanumeric characters

The analog input function block FB2 is configured for the sensor tempe-rature measured in °C. Any or all the above configurable parameters,including the range values, can be changed using any host compliant toFOUNDATION fieldbus. The transmitter database is customized withspecified flange type and material, O–ring and drain/vent materials andmeter code option.

For any protocol available engineering units of pressure measure are :Pa, kPa, MPainH2O@4°C, mmH2O@4°C, psiinH2O@20°C, ftH2O@20°C, mmH2O@20°CinHg, mmHg, Torrg/cm2, kg/cm2, atmmbar, bar

™ Hastelloy is a Cabot Corporation trademark

™ Monel is an International Nickel Co. trademark

™ Viton is a Dupont de Nemour trademark

™ DC200 is a Dow Corning Corporation trademark

™ Galden is a Montefluos trademark

™ AN140 is a Wacker-Chemie trademark

™ Neobee M20 is a Stepan Company trademark

™ Marcol is a Esso Italiana trademark

™ Syltherm is a Dow Chemical Company trademark

(*) Wetted parts of the transmitter.

(**) Bolts and nuts, gasket and mating flange supplied by customer


11

MOUNTING DIMENSIONS (not for construction unless certified) - dimensions in mm (in)262DC with direct mount flanged flush diaphragm seal (barrel housing)

NOTE:Low pressure side opposite to direct mount seal can be a conventional flange or suitable for capillary to remote seal.Conventional process flange connection (1/4in NPT direct or 1/2in NPT through adapter), gasket groove and gaskets are inaccordance with DIN 19213.Bolting threads or fixing adapter for other devices on process flange is 7/16in–20 UNF.

Certificationlabel

Identification tagAdjustments

Terminalside

Electronicside

Integraldisplayhousing

Min. clearanceto removethe cover

Output meterhousingDrain/vent

Valve

Processconnection

71 (2.80)F G

BA

126 (4.96)

135

(5.3

1)

+

127 (5.00)

17 (0.67)26 (1.02)

17 (0.67)36 (1.42)

S

NOSSTIUCRIC

SEL

NOI

NETSOST U

RREVUOCEL

RED

RA

G

TNE'

MEF NE B EL CI

QUAT

E

ALSTIUCRI

C

I VE

H

COPEE

K

VERTIGT

E

H

WN

!

86 (3.39)

AC

D

E

Electricalconnections

17 (0.67)

17 (0

.67)

36

(1.4

2)14

6 (5

.75)

B

50, 100 or 150

(1.97, 3.94 or 5.91)

A

126 (4.96)FG 27

(1.06)

+

26 (1.02)

S

NOSSTIUCRIC

SEL

NOI

NETSOST U

RREVUOCEL

RED

RA

G

TNE'

MEF NE B EL CI

QUAT

E

ALSTIU

CRIC

I VE

H

COPEE

K

VERTIGT

E

H

WN

!

A

DC

E

262DC with direct mount flanged extended diaphragm seal (DIN housing)

Harting HANconnector

Electronic side

Output meterhousing

Integral displayhousing


12

262HC/NC with direct mount flanged diaphragm seal (barrel housing)

Electricalconnections

FG

B

(*)

A

62 (2

.44)

AC

D

E

18 (0

.71)

16

(0.6

3)

100

(3.9

4)

127 (5.00)

17 (0.67)26 (1.02)

17 (0.67)36 (1.42)

S

NOSSTIUCRIC

SEL

NOI

NETSOST U

RREVUOCEL

RED

RA

G

TNE'

MEF NE B EL CI

QUAT

E

ALSTIUCRI

C

I VE

H

COPEE

K

VERTIGT

E

H

WN

!

86 (3.39)

(*) Flush, 50, 100 or 150mm (1.97, 3.94 or 5.91in) extension

gnitaR/eziS gnitaR/eziS gnitaR/eziS gnitaR/eziS gnitaR/eziS

)ni(mmsnoisnemiD )ni(mmsnoisnemiD )ni(mmsnoisnemiD )ni(mmsnoisnemiD )ni(mmsnoisnemiDfo°N fo°N fo°N fo°N fo°Nseloh seloh seloh seloh seloh)aid(A )aid(A )aid(A )aid(A )aid(A

)aid(B )aid(B )aid(B )aid(B )aid(B )aid(C )aid(C )aid(C )aid(C )aid(C )aid(D )aid(D )aid(D )aid(D )aid(D )aid(E )aid(E )aid(E )aid(E )aid(E FFFFF GGGGGhsulf hsulf hsulf hsulf hsulf dednetxe dednetxe dednetxe dednetxe dednetxe

051LCISNAni2003LCISNAni2006LCISNAni2009LCISNAni2051LCISNAni3003LCISNAni3006LCISNAni3009LCISNAni3051LCISNAni4003LCISNAni461NPNID05ND04NPNID05ND46NPNID05ND001NPNID05ND061NPNID05ND

61NPNID08ND04NPNID08ND46NPNID08ND001NPNID08ND061NPNID08ND61NPNID001ND04NPNID001ND

)63.2(06)63.2(06)63.2(06)63.2(06

)5.3(98)5.3(98)5.3(98)5.3(98)5.3(98)5.3(98)63.2(06)63.2(06)63.2(06)63.2(06)63.2(06

)5.3(98)5.3(98)5.3(98)5.3(98)5.3(98)5.3(98)5.3(98

)9.1(84)9.1(84

ANAN

)38.2(27)38.2(27

ANAN

)7.3(49)7.3(49)9.1(84)9.1(84

ANANAN

)38.2(27)38.2(27

ANANAN

)7.3(49)7.3(49

)26.3(1.29)26.3(1.29)26.3(1.29)26.3(1.29

)5(721)5(721)5(721)5(721

)2.6(2.751)2.6(2.751)20.4(201)20.4(201)20.4(201)20.4(201)20.4(201)34.5(831)34.5(831)34.5(831)34.5(831)34.5(831)22.6(851)83.6(261

)47.4(5.021)5(721)5(721

)5.6(561)6(5.251

)36.6(5.861)36.6(5.861

)5.7(5.091)5.7(5.091)88.7(2.002

)29.4(521)29.4(521)13.5(531)17.5(541)17.5(541

)3.6(061)3.6(061)7.6(071)80.7(081)80.7(081)80.7(081)84.7(091

)6(5.251)5.6(561)5.6(561)5.8(612

)5.7(5.091)62.8(012)62.8(012)84.9(142

)9(6.822)01(452)5.6(561)5.6(561)80.7(081)76.7(591)76.7(591)78.7(002)78.7(002)64.8(512)50.9(032)50.9(032)66.8(022)52.9(532

)97.0(02)97.0(02)97.0(02)20.1(62)97.0(02)68.0(22)68.0(22)20.1(62)97.0(02)68.0(22)17.0(81)17.0(81)68.0(22)20.1(62)20.1(62)17.0(81)17.0(81)68.0(22)20.1(62)20.1(62)17.0(81)68.0(22

)77.0(5.91)88.0(5.22

)1(5.52)15.1(5.83

)49.0(42)21.1(5.82

)62.1(23)15.1(5.83

)49.0(42)62.1(23)97.0(02)97.0(02)20.1(62

)1.1(82)81.1(03)97.0(02)49.0(42

)1.1(82)62.1(23)24.1(63)97.0(02)49.0(42

)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9

4888488888444448888888


13

Electrical connectionsHART Version

FIELDBUS Versions

+

+

-

-

++

--691HT

A B C

1

D E F

2

G H I

3

J K L

4

M N O

5

P Q R

6

S T U

7

V W X

8

Y Z #

9

@ % & /

0

+-

PV

REVIEW SERIALLINK

TRIM

F1 F2 F3 F4

CONF

M

Kent-Taylor

0

43

56 7 8

9

1020

40

0

60

100%

2 80

M+

-

- 1

54 6

23 8

7

+

TEST COMM

BUS CONNECTIONS

Internal groundtermination point

Fieldbus line

External groundtermination point

Test points4 to 20mA

Hartingpin

identification

Internal groundtermination point

External groundtermination point

Hand-heldcommunicator

GND

Line load

Remoteindicator

Powersource

250 ohm min

Receiver

HART hand-held communicator may be connected at any wiring termination point in the loop, providing the minimum resistanceis 250 ohm. If this is less than 250 ohm, additional resistance should be added to allow communications

Optional


14

BASIC ORDERING INFORMATION model 262DC Differential /Gauge Pressure Transmitter withdirect mount sealSelect one character or set of characters from each category and specify complete catalog number.Refer to additional ordering information code and specify one or more codes for each transmitter if additional options are required.

LEDOMESAB 1– ts 5ot ht sretcarahc 2 6 2 D C X X X X X X deunitnoC

%51.0YCARUCCAESAB–laestnuomtceridhtiwrettimsnarTerusserPeguaGlaitnereffiD

–stimilnapS-ROSNES 6 ht retcarahcaPk61dna45.0

aPk04dna76.0aPk56dna1.1

aPk061dna76.2aPk006dna01

aPk0042dna04aPk0008dna431

aPk00061dna762

rabm061dna4.5rabm004dna7.6rabm056dna11

rabm0061dna7.62rab6dna1.0

rab42dna4.0rab08dna43.1

rab061dna76.2

Hni46dna41.2 2OHni061dna76.2 2OHni062dna53.4 2OHni246dna7.01 2Oisp78dna54.1isp843dna8.5

isp0611dna4.91isp0232dna7.83

EFGHMPQS

gnitaregnalfgnitnuoM/eziS-EDISERUSSERPHGIH 7– ht retcarahc

ni2ni2ni2ni2ni3

ngiseddoofni3ni3ni3ni3ni4ni4

05ND05ND05ND05ND08ND08ND08ND08ND08ND001ND001ND

051LCISNA003LCISNA006LCISNA009LCISNA051LCISNA051LCISNA003LCISNA006LCISNA009LCISNA051LCISNA003LCISNA04/61NPNID

46NPNID001NPNID061NPNID


001NPNID061NPNID

61NPNID04NPNID

ADGJB1EHKCFMPRWNLQSYTU

)laes(mroftaeS/lairetamegnalfgnitnuoM–EDISERUSSERPHGIH 8– ht retcarahc

leetsnobraCleetsnobraCleetsnobraCleetsnobraC

ss613ISIAss613ISIAss613ISIAss613ISIA

hsinifdetarres–)ecafdesiar(FRmroFhsinifhtooms–)ecafdesiar(FRmroFhsinifdetarres–E/CmroF–6252NID

hsinifhtooms–E/CmroF–6252NIDhsinifdetarres–)ecafdesiar(FRmroF

hsinifhtooms–)ecafdesiar(FRmroFhsinifdetarres–E/CmroF–6252NID

hsinifhtooms–E/CmroF–6252NID

)3,1setoN()3,1setoN()3,2setoN()3,2setoN()3,1setoN(

)1etoN()3,2setoN()3,2setoN(

ABGPDELQ

)strapdettew(lairetamdnahtgnelnoisnetxE–EDISERUSSERPHGIH 9– ht retcarahc

)lairetammgarhpaidroftxenees(hsulF)ni2(mm05)ni2(mm05)ni4(mm001)ni4(mm001)ni6(mm051)ni6(mm051

ssL613ISIA™672CyolletsaH



)4,3setoN()4,3setoN()4,3setoN()4,3setoN()4,3setoN()4,3setoN(

ECANECANECANECANECANECANECAN

F123456

)laes()strapdettew(lairetammgarhpaiD–EDISERUSSERPHGIH 01– ht retcarahc


mulatnaTgnitaockcits-itnanolfeThtiwssL613ISIA

gnitaockcits-itnanolfeThtiw™672CyolletsaHkcits-itnadnanoisorroc-itnagnitaocnolfeThtiwssL613ISIA

)5etoN()6etoN(

)7,6setoN()8,6,5setoN(

)8,6setoN()6,5setoN(

ECANECAN

ECANECANECAN

SHTKYW

diulflliF–EDISERUSSERPHGIH 11– ht retcarahc

lioenociliSdiulftrenI

llifBBAerutarepmethgihroflioenociliS

erutarepmetwolrofremylopenociliS)devorppaADF(liolareniM

)devorppaADF(lioelbategeV)devorppaADF(retaW-nirecylG

)9,3setoN()3etoN()3etoN()3etoN(

SNKHCWAB


15

CD262ledomNOITAMROFNIGNIREDROCISAB X X X X X

)strapdettew(diulflliF/lairetammgarhpaidediserusserpwoL 21– ht retcarahc

ssL613ISIA)dettewton(ssL613ISIA

)taesISIAno(™672CyolletsaH™672CyolletsaH

™004lenoMmulatnaT



™004lenoMmulatnaT



lioenociliSlioenociliSlioenociliSlioenociliSlioenociliSlioenociliS

diulftrenIdiulftrenIdiulftrenIdiulftrenIdiulftrenIdiulftrenI

llifBBAllifBBAllifBBAllifBBA

)yletarapesdetouqebotlaesetomereno(

)9etoN()yletarapesdetouqebotlaesetomereno()9etoN(

)9etoN()9etoN()9etoN()9etoN(

)yletarapesdetouqebotlaesetomereno(

ECANECANECANECAN

ECANECANECANECAN

ECANECAN

SRHKMTA2BFCDLWQP

)strapdettew(noitcennocdnalairetamsretpada/segnalfssecorpediswoL – 31 ht retcarahc

)noitcennoclatnoziroH(ssL613ISIA)noitcennoclatnoziroH(ssL613ISIA

1/4 (tceridf-TPNni 7/ 61 )gnillird.S.UFNUni1/2 (retpadahguorhtf-TPNni 7/ 61 )gnillird.S.UFNUni

)01etoN()01etoN()01etoN()01etoN()01etoN()01etoN()11etoN(


AB

)noitcennoclatnoziroH(™672CyolletsaH)noitcennoclatnoziroH(™672CyolletsaH


DE

)noitcennoclatnoziroH(™004lenoM)noitcennoclatnoziroH(™004lenoM

noitcurtsnocslaesowtrofegnalfgnisolc613ISIA


GHR

)strapdettew(teksagediswoL/stloB 41– ht retcarahc

)aPM61=PWM(–)ECAN(ss613ISIA)aPM61=PWM(–)ECAN(ss613ISIA

noitcurtsnocslaesowtrofteksagtuohtiw)aPM61=PWM(–)ECAN(ss613ISIA

™notiVEFTP

)01etoN()01,9setoN(

)11etoN(

ECANECANECAN

34R

noitcennoclacirtcelednalairetamgnisuoH 51– ht retcarahc

)noisrevlerraB(yollamuinimulA)noisrevlerraB(yollamuinimulA)noisrevlerraB(yollamuinimulA)noisrevlerraB(yollamuinimulA)noisrevlerraB(yollamuinimulA)noisrevlerraB(yollamuinimulA

)noisrevlerraB(eerf-reppocyollamuinimulA)noisrevlerraB(eerf-reppocyollamuinimulA)noisrevlerraB(eerf-reppocyollamuinimulA)noisrevlerraB(eerf-reppocyollamuinimulA)noisrevlerraB(eerf-reppocyollamuinimulA)noisrevlerraB(eerf-reppocyollamuinimulA

)noisrevlerraB(ssL613ISIA)noisrevlerraB(ssL613ISIA)noisrevlerraB(ssL613ISIA)noisrevlerraB(ssL613ISIA)noisrevlerraB(ssL613ISIA)noisrevNID(yollamuinimulA)noisrevNID(yollamuinimulA)noisrevNID(yollamuinimulA)noisrevNID(yollamuinimulA

1/2 TPNni)02MC(5.1x02M

5.31gP1/2 KGni

rotcennocNAHgnitraHrotcennocsubdleiF


5.31gP1/2 KGni



5.31gP1/2 KGni

rotcennocsubdleiF)02MC(5.1x02M

5.31gProtcennocNAHgnitraH

rotcennocsubdleiF

)ylnoesopruplareneg()21etoN()ylnoesopruplareneg()21etoN(


)ylnoesopruplareneg()21etoN()ylnoesopruplareneg()ylnoesopruplareneg(


ABDCEGHLNMPRSTVUZJYKW

snoitpolanoitiddA/tuptuO 61– ht retcarahc

Am02ot4dnanoitacinummoclatigidTRAHAm02ot4dnanoitacinummoclatigidTRAH

APSUBIFORPAPSUBIFORP

subdleiFNOITADNUOFsubdleiFNOITADNUOF

snoitpolanoitiddaoN)"edocgniredrolanoitiddA"ybderedroebot(detseuqersnoitpO



)41,31setoN()31etoN(



H1P2F3


16

ADDITIONAL ORDERING INFORMATION for model 262DCAdd one or more 2-digit code(s) after the basic ordering information to select all required options

XX XX XX XX XX XX XX XX XX XX XX XX XX

)strapdettew()noitisopdnalairetam(evlavtnev/niarDssL613ISIAssL613ISIAssL613ISIA

™672CyolletsaH™672CyolletsaH™672CyolletsaH

™004lenoM™004lenoM™004lenoM

sixassecorpnopotedisegnalfno

mottobedisegnalfnosixassecorpno

potedisegnalfnomottobedisegnalfno

sixassecorpnopotedisegnalfno

mottobedisegnalfno

)51etoN()51etoN()51etoN()61etoN()61etoN()61etoN()71etoN()71etoN()71etoN(

ECANECANECANECANECANECANECANECANECAN

1V2V3V4V5V6V7V8V9V

noitacifitreclacirtcelEaixEEytefaScisnirtnI–DG1yrogetaCIIpuorGXETA

dxEEfoorpemalF–DG2/1yrogetaCIIpuorGXETAecnailpmocngisedLnxEE"N"noitcetorpfoepyT–DG3yrogetaCIIpuorGXETA

ylno()ASC(noitaicossAdradnatSnaidanaC/)MF(lautuMyrotcaF 1/2 )gnisuoh5.31gPdna02M,TPNni)81etoN(5T/6TCIIdxE+4T/5T/6TCIIaixEAASailartsuAsdradnatSotfoorpemalF–ytefaScisnirtnI

htiwylno(lavorppa)MF(lautuMyrotcaF 1/2 )noitcennoclacirtcele5.31gPdna02M,TPNni

1E2E3E4E5E6E

retemtuptuO

noitarbilacdradnatS,reteMorPnoitarbilaclaicepS,reteMorP

elacs%001–0raenilrotacidnituptuogolanAelacs01–0toorerauqsrotacidnituptuogolanA

)elacsraenilrofdeificepsebot(noitaudarglaiceps,rotacidnituptuogolanA)elacstoorerauqsrofdeificepsebot(noitaudarglaiceps,rotacidnituptuogolanA

)reteMoC(rotarugifnocTRAHdnaretemlangiselbammargorP)noitarugifnocremotsuc–reteMoC(rotarugifnocTRAHdnaretemlangiselbammargorP

)81etoN()81etoN()81etoN()81etoN()81etoN()81etoN()81etoN()81etoN(

1D2D3D4D5D6D7D8D

DCLlargetnIyalpsidlargetniDCLlatigiD 1L

egruSrotcetorPtneisnarT/egruS )81etoN( 1S

launamgnitarepOnamreG

nailatI1M2M

egaugnalgat&slebaLnamreG

nailatI1T2T

etalpgatlanoitiddAetalpleetssselniatsnogatfognitnirpresaL 2I

noitarugifnoCHni=erusserP–dradnatS 2 F.ged=erutarepmeT;C°02taisp/OHni=erusserP–dradnatS 2 F.ged=erutarepmeT;C°4taisp/OHni=erusserP–dradnatS 2 C.ged=erutarepmeT;C°02taisp/OHni=erusserP–dradnatS 2 C.ged=erutarepmeT;C°4taisp/O

motsuC

2N3N4N5N6N

erudecorpnoitaraperPP–)teksagEFTPdnalliftrenihtiwelbaliavaylno(gninaelcecivresnegyxO xam T;isp0471/rab021/aPM21= xam F°041/C°06=

noitaraperpecivresnegordyHnoitaraperpsecivreslaicepS

1P2P4P

setacifitreC

noitarbilacfoB.1.3–40201NEetacifitrecnoitcepsnIngisedtnemurtsnifo1.2–40201NEredroehthtiwecnailpmocfoetacifitreC

1C6C

ytilibaecartlairetaM

strapdettewssecorpfo1.2–40201NEredroehthtiwecnailpmocfoetacifitreCstrapdettewssecorpfoB.1.3–40201NEetacifitrecnoitcepsnI

1H3H

rotcennoC

8/7subdleiF1x21MsubdleiF

yrtnethgiarts–NAHgnitraHyrtneelgna–NAHgnitraH

)91,41setoN()91,41setoN()91,31setoN()91,31setoN(

1U2U3U4U


17

Note 1: Not available with DIN mounting flange code M, P, R, W, N, L, Q, S, Y, T, U

Note 2: Not available with ANSI mounting flange code A, D, G, J, B, E, H, K, C, F

Note 3: Not available with 3in ANSI CL150 food design size code 1

Note 4: Not available with ANSI CL 600 and CL 900 mounting flange rating code G, J, H, K and with DIN PN 64, PN 100 and PN 160 mountingflange rating code P, R, W, Q, S, Y

Note 5: Not available with Hastelloy C276 extension code 2, 4, 6

Note 6: Not available with serrated seat finish code A, G, D, L

Note 7: Not available with extension code 1, 2, 3, 4, 5, 6

Note 8: Not available with 2in, DN50, DN80, DN100, mounting flange code A, D, G, J, M, P, R, W, N, L, Q, S, Y, T, U

Note 9: Suitable for oxygen service

Note 10: Not available with low side diaphragm code R, 2, W

Note 11: Not available with low side diaphragm code S, H, K, M, T, A, B, F, C, D, L, Q, P

Note 12: Select type in additional ordering code

Note 13: Not available with Electronic Housing code Z, R, G and W

Note 14: Not available with Electronic Housing code P, E and K

Note 15: Not available with Process flanges/adapters code D, E, G, H, R

Note 16: Not available with Process flanges/adapters code A, B, G, H, R

Note 17: Not available with Process flanges/adapters code A, B, D, E, R

Note 18: Not available with PROFIBUS PA and FF output code 2 or 3

Note 19: Not available with Electronic housing code U, S, T, V, H, M, L, N, D, C, A, B, J, Y


™ Monel is an International Nickel Co. trademark

™ Viton is a Dupont de Nemour trademark

Standard delivery items (can be differently specified by additional ordering code)– Adapters supplied loose

– Plug on axis (no drain/vent valves)

– General purpose (no electrical certification)

– No meter/display, no mounting bracket, no surge protection

– English manual and labels

– Configuration with kPa and deg. C units

– No test, inspection or material traceability certificates

THE SELECTION OF SUITABLE WETTED PARTS AND FILLING FLUID FOR COMPATIBILITY WITH THE PROCESS MEDIA IS A CUSTOMER'SRESPONSIBILITY, IF NOT OTHERWISE NOTIFIED BEFORE MANUFACTURING.


18

BASIC ORDERING INFORMATION model 262HC Gauge Pressure Transmitter with direct mountsealSelect one character or set of characters from each category and specify complete catalog number.Refer to additional ordering information code and specify one or more codes for each transmitter if additional options are required.

LEDOMESAB 1– ts 5ot ht sretcarahc 2 6 2 H C X X X X X X X deunitnoC

%51.0YCARUCCAESAB–laestnuomtceridhtiwrettimsnarTerusserPeguaG






rab061dna76.2

Hni246dna7.01 2Oisp78dna54.1isp843dna8.5


HMPQS

)dettewton(diulFlliF/lairetammgarhpaiD 7– ht retcarahcssL613ISIAssL613ISIAssL613ISIA


llifBBA

R2W

gnitaregnalfgnitnuoM/eziS–EDISERUSSERPHGIH 8– ht retcarahc

ni2ni2ni2ni2ni3


05ND05ND05ND05ND08ND08ND08ND08ND08ND

001ND001ND




001NPNID061NPNID

61NPNID04NPNID





hsinifdetarres-)ecafdesiar(FRmroFhsinifhtooms-)ecafdesiar(FRmroFhsinifdetarres-E/CmroF–6252NID

hsinifhtooms-E/CmroF–6252NIDhsinifdetarres-)ecafdesiar(FRmroF

hsinifhtooms-)ecafdesiar(FRmroFhsinifdetarres-E/CmroF–6252NID

hsinifhtooms-E/CmroF–6252NID



ABGPDELQ


)lairetammgarhpaidroftxenees(hsulF)ni2(mm05)ni2(mm05

)ni4(mm001)ni4(mm001)ni6(mm051)ni6(mm051






F123456





)5etoN()6etoN(

)7,6setoN()8,6,5setoN(

)8,6setoN()6,5setoN(

ECANECAN

ECANECANECAN

SHTKYW







SNKHCWAB


19

CH262ledomNOITAMROFNIGNIREDROCISAB X X




)noisrevlerraB(ssL613ISIA)noisrevlerraB(ssL613ISIA)noisrevlerraB(ssL613ISIA)noisrevlerraB(ssL613ISIA)noisrevlerraB(ssL613ISIA


5.31gP1/2 KGni



5.31gP1/2 KGni



5.31gP1/2 KGni

rotcennocsubdleiF



)ylnoesopruplareneg()01etoN(

ABDCEGHLNMPRSTVUZ











H1P2F3


20

ADDITIONAL ORDERING INFORMATION for model 262HCAdd one or more 2-digit code(s) after the basic ordering information to select all required options

XX XX XX XX XX XX XX XX XX XX XX XXnoitacifitreclacirtcelE

aixEEytefaScisnirtnI–DG1yrogetaCIIpuorGXETAdxEEfoorpemalF–DG2/1yrogetaCIIpuorGXETA

ecnailpmocngisedLnxEE"N"noitcetorpfoepyT–DG3yrogetaCIIpuorGXETAylno()ASC(noitaicossAdradnatSnaidanaC/)MF(lautuMyrotcaF 1/2 )gnisuoh5.31gPdna02M,TPNni

)31etoN(5T/6TCIIdxE+4T/5T/6TCIIaixEAASailartsuAsdradnatSotfoorpemalF–ytefaScisnirtnIhtiwylno(lavorppa)MF(lautuMyrotcaF 1/2 )noitcennoclacirtcele5.31gPdna02M,TPNni

1E2E3E4E5E6E

retemtuptuO


elacs%001–0raenilrotacidnituptuogolanA)elacsraenilrofdeificepsebot(noitaudarglaiceps,rotacidnituptuogolanA


)31etoN()31etoN()31etoN()31etoN()31etoN()31etoN(

1D2D3D5D7D8D




nailatI1M2M


nailatI1T2T



motsuC

2N3N4N5N6N

erudecorpnoitaraperPP–)lliftrenihtiwelbaliavaylno(gninaelcecivresnegyxO xam T;isp0471/rab021/aPM21= xam F°041/C°06=


1P2P4P

setacifitreC


1C6C



1H3H

rotcennoC




1U2U3U4U


21











Note 11: Not available with Electronic Housing code Z, R, G

Note 12: Not available with Electronic Housing code P, E


Note 14 : Not available with Electronic housing code U, S, T, V, H, M, L, N, D, C, A, B


Standard delivery items (can be differently specified by additional ordering code)– General purpose (no electrical certification)







22

BASIC ORDERING INFORMATION model 262NC Absolute Pressure Transmitter with direct mountsealSelect one character or set of characters from each category and specify complete catalog number.Refer to additional ordering information code and specify one or more codes for each transmitter if additional options are required.

LEDOMESAB 1– ts 5ot ht sretcarahc 2 6 2 N C X X X X X X X deunitnoC

%51.0YCARUCCAESAB–laestnuomtceridhtiwrettimsnarTerusserPetulosbA






rab061dna76.2

gHmm0021dna02isp78dna54.1isp843dna8.5


HMPQS

)dettewton(diulFlliF/lairetammgarhpaiD 7– ht retcarahcssL613ISIAssL613ISIAssL613ISIA


llifBBA

R2W

gnitaregnalfgnitnuoM/eziS–EDISERUSSERPHGIH 8– ht retcarahc

ni2ni2ni2ni2ni3


05ND05ND05ND05ND08ND08ND08ND08ND08ND

001ND001ND




001NPNID061NPNID

61NPNID04NPNID





hsinifdetarres–)ecafdesiar(FRmroFhsinifhtooms–)ecafdesiar(FRmroFhsinifdetarres–E/CmroF–6252NID

hsinifhtooms–E/CmroF–6252NIDhsinifdetarres–)ecafdesiar(FRmroF

hsinifhtooms–)ecafdesiar(FRmroFhsinifdetarres–E/CmroF–6252NID

hsinifhtooms–E/CmroF–6252NID



ABGPDELQ


)lairetammgarhpaidroftxenees(hsulF)ni2(mm05)ni2(mm05

)ni4(mm001)ni4(mm001)ni6(mm051)ni6(mm051






F123456





)5etoN()6etoN(

)7,6setoN(,6,5setoN(

)8)8,6setoN()6,5setoN(

ECANECAN

ECANECANECAN

SHTKYW







SNKHCWAB


23

CN262ledomNOITAMROFNIGNIREDROCISAB X X




)noisrevlerraB(ssL613ISIA)noisrevlerraB(ssL613ISIA)noisrevlerraB(ssL613ISIA)noisrevlerraB(ssL613ISIA)noisrevlerraB(ssL613ISIA


5.31gP1/2 KGni



5.31gP1/2 KGni



5.31gP1/2 KGni

rotcennocsubdleiF



)ylnoesopruplareneg()01etoN(

ABDCEGHLNMPRSTVUZ











H1P2F3


24

ADDITIONAL ORDERING INFORMATION for model 262NCAdd one or more 2-digit code(s) after the basic ordering information to select all required options

XX XX XX XX XX XX XX XX XX XX XX XXnoitacifitreclacirtcelE

aixEEytefaScisnirtnI–DG1yrogetaCIIpuorGXETAdxEEfoorpemalF–DG2/1yrogetaCIIpuorGXETA

ecnailpmocngisedLnxEE"N"noitcetorpfoepyT–DG3yrogetaCIIpuorGXETAylno()ASC(noitaicossAdradnatSnaidanaC/)MF(lautuMyrotcaF 1/2 )gnisuoh5.31gPdna02M,TPNni

)31etoN(5T/6TCIIdxE+4T/5T/6TCIIaixEAASailartsuAsdradnatSotfoorpemalF–ytefaScisnirtnIhtiwylno(lavorppa)MF(lautuMyrotcaF 1/2 )noitcennoclacirtcele5.31gPdna02M,TPNni

1E2E3E4E5E6E

retemtuptuO


elacs%001–0raenilrotacidnituptuogolanA)elacsraenilrofdeificepsebot(noitaudarglaiceps,rotacidnituptuogolanA


)31etoN()31etoN()31etoN()31etoN()31etoN()31etoN(

1D2D3D5D7D8D




nailatI1M2M


nailatI1T2T



motsuC

2N3N4N5N6N

erudecorpnoitaraperPP–)lliftrenihtiwelbaliavaylno(gninaelcecivresnegyxO xam T;isp0471/rab021/aPM21= xam F°041/C°06=


1P2P4P

setacifitreC


1C6C



1H3H

rotcennoC




1U2U3U4U


25











Note 11: Not available with Electronic Housing code Z, R, G

Note 12: Not available with Electronic Housing code P, E


Note 14: Not available with Electronic housing code U, S, T, V, H, M, L, N, D, C, A, B


Standard delivery items (can be differently specified by additional ordering code)– General purpose (no electrical certification)







26


27


ABB LtdHoward Road, St. NeotsCambridgeshire, PE19 3EUUKTel: +44(0)1480 475321Fax: +44(0)1480 217948

ABB Inc.125 E. County Line RoadWarminster, PA 18974USATel: +1 215 674 6000Fax: +1 215 674 7183

ABB Instrumentation spaVia Statale 11322016 Lenno (CO)ItalyTel: +39 0344 58111Fax: +39 0344 56278

SS

/262

XC_1

ABB has Sales & Customer Supportexpertise in over 100 countries worldwide

www.abb.com

The Company’s policy is one of continuous productimprovement and the right is reserved to modify the

information contained herein without notice.

Printed in Italy (09.02)

© ABB 2002

ABB Automation Products GmbHSchillerstrasse 72D-32425 MindenGermanyTel: +49 (0) 571 830 1691Fax: +49 (0) 571 830 1368

Documents

SS/262XC 1 2600T Series Pressure Transmitters ANSI/ISA–S 82.03 hydrostatic test requirements and SAMA PMC 27.1. Environmental limits Electromagnetic compatibility