SS/264XR 5 2600T Series Pressure Transmitters · 2018-05-09 · 2600T Pressure Transmitters Model 264DR, 264PR, 264HR, 264VR, 264NR SS/264XR_5 2 Functional Specifications Range and

Data SheetSS/264XR_5

ABB 2600T SeriesEngineered solutions

for all applications

Base accuracy : ±0.075%

Span limits– 0.2 to 60000kPa; 0.8inH2O to 8700psi– 0.54 to 16000kPa abs; 4mmHg to 2320psia

Reliable sensing system coupled with very latestdigital technologies

Comprehensive sensor choice– optimize in-use total performance and stability

5–year stability

Flexible configuration facilities– provided locally via local keys combined with LCD

indicator or via hand held terminal orPC configuration platform

Multiple protocol availability– provides integration with HART®, PROFIBUS PA

and FOUNDATION Fieldbus platforms offeringinterchangeability and transmitter upgradecapabilities

Broad selection of variants, options fill fluids andwetted materials

– allows total flexibility maximizing cost-effectiveaspect, also providing applications with criticalprocess media at extended temperature range

PED compliance to sound engineering practice(SEP)

FieldIT

2600T Series Pressure Transmitters

Model 264DR Differential Models 264PR and 264HR Gauge

Models 264VR and 264NR Absolutewith remote seal(s)

2600T Pressure TransmittersModel 264DR, 264PR, 264HR, 264VR, 264NR SS/264XR_5

2

Functional SpecificationsRange and span limits

– models 264DR/264PR/264VR

General DescriptionModels detailed in this data sheet apply for those transmitters whichinclude one or two remote seal(s) connected via a capillary to thetransmitter sensor. Depending on the selected ordering code thefollowing models are available:a) model 264DR which allows a differential measurement using either

two remote seals of same type and size or one remote seal (onpositive or negative side) and a standard threaded connection direct1/4 – 18 NPT on flange or 1/2 – 14 NPT through adapter, for the wet ordry leg on the side opposite to seal.

b) models 264PR or 264VR allowing gauge or absolute measurementrespetively with the reference side at atmosphere or at vacuum. Theother side which can be the positive or negative (high or low pressureside) features the required remote seal.

Model 264HR or 264NR have the remote seal on the positive side and theuser can select the suitable code for having the reference at armosphericor vacuum pressure respectively for gauge or absolute measure.

The following table list the types of standard seal which can be combinedwith 264xR transmitters (the mnemonic is used as reference in thecompatibility table of page 3).

Refer to seal data sheet for all data and details relevant to seal element.

All following specification data apply for identical characteristics of the twosides when the transmitter is differential with two seals.

rosneSedoC

timiLegnaRreppU)LRU(

)LRL(timiLegnaRrewoLmuminiM

napsRD462

laitnereffiderusaem

RP462eguag

erusaem

RV462etulosbaerusaem

BaPk4

rabm04Hni61 2O

aPk4–rabm04–

Hni61– 2O

aPk2.0rabm2

Hni8.0 2O

EaPk61

rabm061Hni46 2O

aPk61–rabm061–

Hni46– 2O

aPk61–rabm061–

Hni46– 2O

)§(sbaaPk70.0)§(sbarabm7.0

)§(gHmm5.0

aPk45.0rabm4.5

Hni61.2 2O

FaPk04

rabm004Hni061 2O

aPk04–rabm004–

Hni061– 2O

aPk04–rabm004–

Hni061– 2O


)§(gHmm5.0

aPk76.0rabm7.6

Hni76.2 2O

GaPk56

rabm056Hni062 2O

aPk56–rabm056–

Hni062– 2O

aPk56–rabm056–

Hni062– 2O


)§(gHmm5.0

aPk1.1rabm11

Hni53.4 2O

HaPk061

rabm0061Hni246 2O

aPk061–rabm0061–

Hni246– 2O


)§(gHmm5.0


)§(gHmm5.0

aPk76.2rabm7.62

Hni7.01 2O

MaPk006

rab6isp78

aPk006–rab6–isp78–


)§(gHmm5.0


)§(gHmm5.0

aPk01rab1.0isp54.1

PaPk0042

rab42isp843

aPk0042–rab42–isp843–


)§(gHmm5.0


)§(gHmm5.0

aPk04rab4.0isp8.5

QaPk0008

rab08isp0611

aPk0008–rab08–

isp0611–


)§(gHmm5.0


)§(gHmm5.0

aPk431rab43.1isp4.91

SaPk00061

rab061isp0232

aPk00061–rab061–isp0232–


)§(gHmm5.0


)§(gHmm5.0


ledoM epytlaeS eziS cinomenM

W462SrefaW

)doof(refaW

1 1/2 04ND/ni05ND/ni208ND/ni3

5.1P2P3P

C462SeetlacimehC

degnalfni3 3P

A462SE462SR462S

degnalFmgarhpaidhsulf)tnioJgniRosla(

-1 1/2 )ylnoJREMSA(ni05ND/ni2

001-08ND/ni4-3

5.1P2P3P

degnalFdednetxemgarhpaid

05ND/ni208ND/ni3001ND/ni4

2E3E3P

U462S noinU 1 1/2n 5.1Z

T462S enil-ffodedaerhT 2 1/2 ni 5.2T

M462S enil-ffodegnalF 2 1/2n 5.2T

S462S

tunnoinUpmalcirT

lerruByrrehCcitpesA,yratinaS

05F/ni208F/ni3

ni4

2S3S3S

B462S nottuB ni1 1B

P462SecivresaerU

degnalf1 1/2 ni2 1/2 ni

5.1U5.2U


3

Lower Range Limit (LRL) for 264NR is 0.07kPa abs, 0.7mbar abs,0.5mmHg for all ranges

(§) Lower Range Limit is 0.135kPa abs, 1.35mbar abs, 1mmHg forinert Galden or 0.4kPa abs, 4mbar abs, 3mmHg for inert Halocarbon.

– models 264HR/NR Span limits

Maximum span = URL(can be further adjusted up to ± URL (TD = 0.5) for differentialmodels, within the range limits)

IT IS RECOMMENDED TO SELECT THE TRANSMITTER SENSORCODE PROVIDING THE TURNDOWN VALUE AS LOWEST ASPOSSIBLE TO OPTIMIZE PERFORMANCE CHARACTERISTICS.

Zero suppression and elevation

Zero and span can be adjusted to any value within the range limitsdetailed in the table as long as:

– calibrated span ≥ minimum span

DampingSelectable time constant : 0, 0.25, 0.5, 1, 2, 4, 8 or 16s.This is in addition to sensor response time

Turn on time

Operation within specification in less than 1s with minimumdamping.

Insulation resistance

> 100MΩ at 1000VDC (terminals to earth)

The combinations sensor code/seal type marked (•) modify the base accuracy rating and static pressure effect; refer to performance specifications.Although he above table defines capillary length, for some types of seal combined to the sensor, care should be taken of the maximum workingpressure of the used seal which can limit the range.

Refer to ABB for data related to application of capillary lengths greater than those specified in above table.

rosneSedoC

egnaRreppU)LRU(timiL

egnaRrewoL)LRL(timiL

RH462rof

napSmuminiM

RH462 RN462

GaPk56

rabm056Hni062 2O

aPk56–rabm056–

Hni062– 2O

aPk1.1rabm11

Hni53.4 2O

aPk1.1rabm11gHmm8

HaPk061

rabm0061Hni246 2O


)§(gHmm5.0

aPk76.2rabm7.62

Hni7.01 2O

aPk76.2rabm7.62

gHmm02

MaPk006

rab6isp78


)§(gHmm5.0

aPk01rab1.0isp54.1

aPk01rab1.0isp54.1

PaPk0042

rab42isp843


)§(gHmm5.0

aPk04rab4.0isp8.5

aPk04rab4.0isp8.5

QaPk0008

rab08isp0611


)§(gHmm5.0



SaPk00061

rab061isp0232


)§(gHmm5.0



VaPk00006

rab006isp0078


)§(gHmm5.0

aPk0002rab02isp092

rosneSedoC

)stekarbni)m(htgnelyrallipacmumixamhtiwsepytlaesdewolla(ytilibitapmoCnoitarugifnoctnemerusaemsusrev

laitnereffiD)slaesowt(

laitnereffiddnaeguag)laeseno(

etulosba)laeseno(

B )5.1(3P)•5.1(3S)•1(5.2T)•1(3E

E )3(3P)•3(3S,)•2(5.2T,)•2(3E

)1(3P)1(3S

)1(3P)1(3S

G-F )3(5,2T,)4(3E,)2(2E,)6(3P,)3(2P)6(3S,)•1(2S,)3(5.2U

)2(5,2T,)3(3E,)4(3P,)2(2P)4(3S,)3(5.2U

)2(5,2T,)3(3E,)3(3P,)2(2P)3(3S,)3(5.2U

H )6(3E,)6(2E,)8(3P,)8(2P,)4(5.1P)01(3S,)3(2S,)6(5.2U,)6(5.2T

,)3(5.1Z,)8(3E,)4(2E,)01(3P,)6(2P,)3(5.1P)01(3S,)2(2S,)6(5.2U,)6(5.2T

)6(3E,)3(2E,)8(3P,)5(2P,)3(5.1P)8(3S,)2(2S,)5(5.2U,)5(5.2T

M ,)8(3E,)6(2E,)01(3P,)8(2P,)5(5.1P)01(3S,)6(2S,)6(5.2U,)6(5.2T

,)5(5.1Z,)8(3E,)6(2E,)01(3P,)8(2P,)5(5.1P)01(3S,)6(2S,)6(5.2U,)5(5.1U,)6(5.2T

,)6(3E,)5(2E,)8(3P,)6(2P,)4(5.1P)8(3S,)5(2S,)5(5.2U,)4(5.1U,)5(5.2T

P ,)8(3E,)6(2E,)01(3P,)8(2P,)5(5.1P)01(3S,)6(2S,)6(5.2U,)6(5.2T

,)5(5.1Z,)8(3E,)6(2E,)01(3P,)8(2P,)5(5.1P)01(3S,)6(2S,)6(5.2U,)5(5.1U,)6(5.2T

,)6(3E,)5(2E,)8(3P,)6(2P,)4(5.1P)8(3S,)5(2S,)5(5.2U,)4(5.1U,)5(5.2T

Q ,)8(3E,)6(2E,)01(3P,)8(2P,)5(5.1P)01(3S,)6(2S,)6(5.2U,)6(5.2T

,)5(5.1Z)•3(1B,)8(3E,)6(2E,)01(3P,)8(2P,)5(5.1P)01(3S,)6(2S,)6(5.2U,)5(5.1U,)6(5.2T

,)6(3E,)5(2E,)8(3P,)6(2P,)4(5.1P)8(3S,)5(2S,)5(5.2U,)4(5.1U,)5(5.2T

S ,)01(3P,)8(2P,)5(5.1P)6(5.2U,)6(5.2T

,)5(5.1Z,)01(3P,)8(2P,)5(5.1P)•3(1B,)6(5.2U,)5(5.1U,)6(5.2T

,)8(3P,)6(2P,)4(5.1P)5(5.2U,)4(5.1U,)5(5.2T

V )6(5.2U,)5(5.1U,)3(1B


4

Operative limits

Temperature limits °C (°F) :

Ambient (is the operating temperature)

Lower ambient limit for LCD indicators: –20°C (–4°F)

Upper ambient limit for LCD indicators: +70°C (+158°F)

Note : For Hazardous Atmosphere applications see the temperaturerange specified on the certificate/approval relevant to the aimedtype of protection

Process

Lower limit (side without seal for 264DR only)

– refer to lower ambient limits; –20°C (–4°F) for Viton gasket

Upper limit (side without seal for 264DR only)

– Silicone oil: 121°C (250°F) (1)

– Inert fluid: 100°C (212°F) (2)

(1) 100°C (212°F) for application below atmospheric pressure

(2) 65°C (150°F) for application below atmospheric pressure

The following table show characteristics of capillary/seal fill fluids whenused in transmitters with remote seal.

Fill fluids with FDA are defined as food fills and are Generally RecognizedAs Safe (GRAS) by the US Food and Drug Administration (FDA).

REFER ALSO TO S264 DATA SHEET FOR FURTHER LIMITATIONDUE TO SEAL VARIANTS.

Storage

Lower limit: –50°C (–58°F); –40°C (–40°F) for LCD indicators

Upper limit: +85°C (+185°F)

Pressure limitsRefer to seal specification sheet for maximum working pressure relatedto the used remote seal.

Overpressure limits (without damage to the transmitter)

0.07kPa abs, 0.7mbar abs, 0.01psia (0.135kPa abs, 1.35mbar abs,1mmHg for inert Galden or 0.4kPa abs, 4mbar abs, 3mmHg for inertHalocarbon) to transmitter sensor limit or flange rating of seal,whichever is less:

– 21MPa, 210bar, 3045psi for models 264DR, 264PR and 264VR(except 7MPa, 70bar, 1015psi for sensor code B and 16MPa,160bar, 2320psi for sensor code E)

– 21MPa, 210bar, 3045psi for models 264HR/NR sensors P,Q,S

– 14MPa, 140bar, 2030psi for models 264HR/NR sensors G,H,M

– 90MPa, 900bar, 13050psi for model 264HR sensor V.

Static pressure

Transmitters for differential pressure model 264DR operates withinspecifications between the following limits:

– 1.3kPa abs,13mbar abs, 0.2psia and 21MPa, 210bar, 3045psi(except 7MPa, 70bar, 1015psi for sensor code B and 16MPa,160bar, 2320psi for sensor code E).

– 0.07kPa abs,0.7mbar abs, 0.1psia and 21MPa, 210bar, 3045psi(except 7MPa, 70bar, 1015psi for sensor code B and 16MPa,160bar, 2320 psi for sensor code E) or flange rating of sealwhichever is less, using two remote seals on both transmitter side.

Proof pressure

The transmitter can be exposed without leaking to line pressure of up to

– 28MPa, 280bar, 4000psi for model 264DR, 264PR and 264VR andfor sensor codes G,H,M of models 264HR and 264NR

– 40MPa, 400bar, 5900 psi for sensor codes P,Q,S of models264HR/NR

– 90MPa, 900bar, 13050 psi for sensor code V of model 264HR

or two times the flange rating of seal, whichever is less

Meet ANSI/ISA–S 82.03 hydrostatic test requirements and SAMAPMC 27.1.

gnilliF

sledoMRV/RP/RD462

sledoMRN/RH462

ledoMRH462

srosneSSotF

srosneSE,B

srosneSSotG

rosneSV

lioenociliS002CD

58+dna04–)581+dna04–(

58+dna52–)581+dna31–(

58+dna04–)581+dna04–(

58+dna04–)581+dna04–(

trenInedlaG

58+dna02–)581+dna4–(

58+dna01–)581+dna41+(

58+dna02–)581+dna4–(

trenInobracolaH

58+dna02–)581+dna4–(

58+dna01–)581+dna41+(

58+dna02–)581+dna4–(

SDIULFLLIF)NOITACILPPA(

SNOITIDNOCGNITAREPO

xamTfo>sbaP@

nimPsbarabm

)aisp(

xamTnimP@

nimT

002CD-lioenociliS)esopruplareneG(

)093(002rabm53@

7.0)10.0(

061)023(

04–)04–(

041NA-lioenociliS)erutarepmethgiH(

)617(083rab1@

7.0)10.0(

003)275(

5–)32+(

TLXmrehtlyS–remyloPenociliS)erutarepmetwoL(

)212(001rabm011@

2)30.0(

02)86(

001–)841–(

02-MeeboeN-lioelbategeVADF)yratinaS-dooF(

)093(002rab1@

031)9.1(

051)003(

81–)0(

)%07(retaWnirecylGADF)yratinaS-dooF(

)002(39rab1@

0001)5.41(

39)002(

7–)02+(

28LOCRAM-liolareniMADF)yratinaS-dooF(

)093(002rabm002@

33)5.0(

04)401(

04–)04–(

nedlaG–trenI)ecivreSnegyxO(

)023(061rab1@

7.0)10.0(

56)051(

81–)0(

2.4nobracolaH–trenI)ecivreSnegyxO(

)653(081rabm004@

4)60.0(

07)851(

02–)4–(

llifBBA)slaicepsdnastniaP(

)275(003rabm004@

7.0)10.0(

061)023(

01–)41+(


5

Environmental limits

Electromagnetic compatibility (EMC)

Comply with EN 61000–6–3 for emission and EN 61000–6–2 forimmunity requirements and test;

Radiated electromagnetic immunity level: 30V/m(according to IEC 1000–4–3, EN61000–4–3)

Conducted electromagnetic immunity level : 30V(according to IEC 1000–4-6, EN 61000–4–6)

Surge immunity level (with surge protector): 4kV(according to IEC 1000-4–5 EN 61000–4–5)

Fast transient (Burst) immunity level: 4kV(according to IEC 1000–4–4 EN 61000–4–4)

Pressure equipment directive (PED)

Comply with 97/23/EEC following sound engineering practice (SEP).

Humidity

Relative humidity: up to 100% annual average

Condensing, icing: admissible

Vibration resistance

Accelerations up to 2g at frequency up to 1000Hz(according to IEC 60068–2–6)

Shock resistance (according to IEC 60068–2–27)

Acceleration: 50g

Duration: 11ms

Wet and dust-laden atmospheres

The transmitter is dust and sand tight and protected against immersioneffects as defined by EN 60529 (1989) to IP 67 (IP 68 on request) or byNEMA to 4X or by JIS to C0920. IP65 with Harting Han connector.

Hazardous atmospheres

With or without output meter/integral display– COMBINED ATEX (Intrinsic safety and flameproof), FM and CSA

ZELM approval. See below detailed classifications.– COMBINED INTRINSIC SAFETY and FLAMEPROOF/EUROPE:

ATEX/ZELM approvalII 1 GD T50°C, EEx ia IIC T6 (–40°C ≤ Ta ≤+40°C)T95°C, EEx ia IIC T4 (–40°C ≤ Ta ≤+85°C)II 1/2 GD T85°C, EEx d IIC T6 (–40°C ≤ Ta ≤ +75°C)

– INTRINSIC SAFETY/EUROPE:ATEX/ZELM approvalII 1 GD T50°C, EEx ia IIC T6 (–40°C ≤ Ta ≤+40°C)T95°C, EEx ia IIC T4 (–40°C ≤ Ta ≤+85°C)

– TYPE "N"/EUROPE:ATEX/ZELM type examination (for HART)II 3 GD T50°C, EEx nL IIC T6 (–40°C ≤ Ta ≤+40°C)

T95°C, EEx nL IIC T4 (–40°C ≤ Ta ≤+85°C)– FLAMEPROOF/EUROPE:

ATEX/CESI approvalII 1/2 GD T85°C, EEx d IIC T6 (–40°C ≤ Ta ≤ +75°C)

– CANADIAN STANDARDS ASSOCIATION and FACTORY MUTUAL:– Explosionproof: Class I, Div. 1, Groups A, B, C, D– Dust ignitionproof : Class II, Div. 1, Groups E, F, G– Suitable for : Class II, Div. 2, Groups F, G; Class III, Div. 1, 2– Nonincendive: Class I, Div. 2, Groups A, B, C, D– Intrinsically safe: Class I, II, III, Div. 1, Groups A, B, C, D, E, F, G

AEx ia IIC T6/T4, Zone 0 (FM)– STANDARDS AUSTRALIA (SAA): TS Approval

- Intrinsically safe Ex ia IIC T4/T5 (–20°C ≤ Ta ≤+80°C) only HART- No sparking Ex n IIC T4/T6 (–20°C ≤ Ta ≤+80°C) only HART- Flameproof Ex d IIC T4/T6 (–20°C ≤ Ta ≤+80°C)- Dust ignitionproof DIP A21 Ta T6 (–20°C ≤ Ta ≤+80°C)

– INTRINSIC SAFETY/CHINANEPSI approval Ex ia IIC T4-T6

– FLAMEPROOF/CHINANEPSI approval Ex d IIC T6

– GOST (Russia), GOST (Kazakistan), Inmetro (Brazil)based on ATEX


6

R(kΩ) =Supply voltage – min. operating voltage (VDC)–––––––––––––––––––––––––––––––––––––––

22.5

Electrical Characteristics and OptionsHART digital communication and 4 to 20mA output

Power Supply

The transmitter operates from 10.5 to 42VDC with no load and isprotected against reverse polarity connection (additional load allowsoperations over 42VDC).

For EEx ia and other intrinsically safe approval power supply mustnot exceed 30VDC.

Ripple

20mV max on a 250Ω load as per HART specifications

Load limitations

4 to 20mA and HART total loop resistance :

A minimum of 250Ω is required for HART communication.

Optional indicators

Output meter

CoMeter and Prometer LCD:

5-digit (±99999 counts) programmable with 7.6mm. high (3in),7-segment numeric characters plus sign and digital point for digitalindication of output value in percentage, current or engineer unit;

10-segment bargraph display (10% per segment) for analogindication of output in percentage;

7-digit with 6mm. high (2.3in), 14-segment alphanumericcharacters, for engineer units and configuration display

Analog : 36mm (1.4in) scale on 90°.

Integral display

LCD, 15 lines x 56 column dot matrix providing 2 lines indication as

– top: 5-digit (numeric) plus sign or 7-digit alphanumeric

– bottom: 7-digit alphanumeric

and additional 50-segment bargraph for indication of analog outputin percentage.

User-definable matrix display mode with HART communication:

– process variable in pressure unit or

– output signal as percentage, current or engineering units

Display also indicates in/out transfer function, static pressure,sensor temperature and diagnostic messages and providesconfiguration facilities.

Optional surge protection

Up to 4kV

– voltage 1.2 µs rise time / 50 µs delay time to half value

– current 8 µs rise time / 20 µs delay time to half value

Output signal

Two–wire 4 to 20mA, user-selectable for linear or square root output,power of 3/2 or 5/2, 5th order or two 2nd order switching point selectableprogrammable polynomial output.

HART® communication provides digital process variable (%, mA orengineering units) superimposed on 4 to 20mA signal, with protocolbased on Bell 202 FSK standard.

Output current limits (to NAMUR standard)

Overload condition

- Lower limit: 3.8mA

- Upper limit: 20.5mA

Transmitter failure mode (to NAMUR standard)

The output signal can be user-selected to a value of 3.7 or 22mA ongross transmitter failure condition, detected by self-diagnostics.

In case of CPU failure the output is driven <3.7mA or >22mA.

(volts)

MINIMUM OPERATING VOLTAGES

10.5

with integral display

with optional output analog indicator

with optional surge protection

with ProMeter output indicator

10.7 12.3 12.5

no link on output indicator plugs

15.3

with CoMeter indicator and HART communication

13.3


7

PROFIBUS PA output

Device type

Pressure transmitter compliant to Profiles 3.0 Class A & B; ident.number 052B HEX.

Power supply

The transmitter operates from 9 to 32VDC , polarity independent.

For EEx ia approval power supply must not exceed 17.5VDC.Intrinsic safety installation according to FISCO model.

Current consumptionoperating (quiescent): 10.5mA

fault current limiting: 20mA max.

Output signal

Physical layer in compliance to IEC 1158–2/EN 61158–2 withtransmission to Manchester II modulation, at 31.25kbit/sec.

Output interface

PROFIBUS PA communication according to Profibus DP50170 Part 2/DIN 19245 part 1–3.

Output update time

25ms

Function blocks

2 analog input, 1 transducer, 1 physical

Integral display




and additional 50-segment bargraph for indication of output inpercentage of the analog input function block assigned to the primaryvariable.

User-definable matrix display mode:

– process variable in pressure units or

– primary variable in engineering units (output of transducer block) or

– output as percentage or engineering units of analog input functionblocks

Display also indicates diagnostic messages and providesconfiguration facilities.Secondary variable, static pressure and sensor temperature can beread.

Transmitter failure mode

On gross transmitter failure condition, detected by self-diagnostics, theoutput signal can be driven to defined conditions, selectable by the useras safe, last valid or calculated value. If electronic failure or short circuitoccur the transmitter consumption is electronically limited at a definedvalue (20mA approx), for safety of the network.

FOUNDATION Fieldbus output

Device type

LINK MASTER DEVICE

Link Active Scheduler (LAS) capability implemented.

Power supply

The transmitter operates from 9 to 32VDC, polarity independent.

For EEx ia approval power supply must not exceed 24VDC (entitycertification) or 17.5VDC (FISCO certification), according to FF–816.

Current consumption

operating (quiescent): 10.5mA

fault current limiting: 20mA max.

Output signal

Physical layer in compliance to IEC 1158–2/EN 61158–2 withtransmission to Manchester II modulation, at 31.25kbit/sec.

Function blocks/execution period

2 enhanced Analog Input blocks/25ms max (each)1 enhanced PID block/40ms max.1 standard ARitmetic block/25ms1 standard Input Selector block/25ms1 standard Control Selector block/25ms1 standard Signal Characterization block/25ms1 standard Integrator/Totalizer block/25ms

Additional blocks

1 enhanced Resource block

1 custom Pressure with calibration transducer block

1 custom Advanced Diagnostics transducer block including Plugged Input Line Detection

1 custom Local Display transducer block

Number of link objects35

Number of VCRs

35

Output interface

FOUNDATION fieldbus digital communication protocol to standard H1,compliant to specification V. 1.6; FF registration in progress.

Integral display




and additional 50-segment bargraph for percentage indication of theanalog input function block output, assigned to the primary variable.

User-definable matrix display mode:

– process variable in pressure units or

– primary variable in engineering units (output of transducer block) or

– output as percentage or engineering units of one or more selected function blocks

Display also indicates diagnostic messages. Secondary variable,static pressure and sensor temperature can be read.

Transmitter failure mode

The output signal is "frozen" to the last valid value on gross transmitterfailure condition, detected by self-diagnostics which also indicate aBAD conditions. If electronic failure or short circuit occur the transmitterconsumption is electronically limited at a defined value (20mA approx),for safety of the network.


8

Operating influences

Temperature effects

per 20K (36°F) ambient temperature change on transmitter sensorbetween the limits of –20°C to +65°C (–4 to +150°F):

The total temperature error is the combination of the abovetransmitter effect with seal errors, as appliclable due to applicationtemperatures.

Refer to seal data sheet for additional effects of the remote seal.

Optional CoMeter and ProMeter ambient temperature

Total reading error per 20K (36°F) change between the ambient limitsof –20 and +70°C (-4 and +158°F) :

±0.15% of max span (16mA).

Static pressure (zero errors can be calibrated out at line pressure)

for differential measurement per 2MPa, 20bar or 290psi.

Model 264DR with remote seal(s)– zero error: ±0.25% of URL– span error: ±0.25% of readingMultiply by 1.5 the errors for sensor codes B and E and for sensor/seal combinations marked (•)

Supply voltage

Within voltage/load specified limits the total effect is less than0.005% of URL per volt.

Load

Within load/voltage specified limits the total effect is negligible.

Electromagnetic field

Total effect : less than 0.10% of span from 20 to 1000MHz and forfield strengths up to 30V/m when tested with shielded conduit andgrounding, with or without meter.

Common mode interference

No effect from 100Vrms @ 50Hz, or 50VDC

Vibration effect

±0.10% of URL (according to IEC 61298–3)

URLSpan

URLSpan

URLSpan

URLSpan

Performance specificationsStated at reference condition to IEC 60770 ambient temperature of 20°C(68°F), relative humidity of 65%, atmospheric pressure of 1013hPa(1013mbar), mounting position with vertical diaphragm and zero basedrange for transmitter with isolating diaphragms in AISI 316 L ss or Hastelloyand silicone oil fill and HART digital trim values equal to 4–20mA span endpoints, in linear mode.

Unless otherwise specified, errors are quoted as % of span.

Some performance data are affected by the actual turndown (TD) as ratiobetween Upper Range Limit (URL) and calibrated span.

IT IS RECOMMENDED TO SELECT THE TRANSMITTER SENSOR CODEPROVIDING THE TURNDOWN VALUE AS LOWEST AS POSSIBLE TOOPTIMIZE PERFORMANCE CHARACTERISTICS.

Accuracy rating% of calibrated span, including combined effects of terminal basedlinearity, hysteresis and repeatability.

For fieldbus versions SPAN refer to analog input function block outscalerange

Using remote seal sizes <DN 80/3in– ±0.10% for TD from 1:1 to 10:1

(±0.10% for sensor codes B and E for TD from 1:1 to 5:1)

– ±0.01% x for TD from 10:1 to 20:1

±0.02% x for sensor codes B and Efor TD from 5:1 to 10:1)

Using remote seal sizes ≥ DN 80/3in– ±0.075% for TD from 1:1 to 10:1

( ±0.10% for sensor codes B and E for TD from 1:1 to 5:1)

– ±0.0075% x for TD from 10:1 to 20:1

(±0.02% x for sensor codes B and Efor TD from 5:1 to 10:1)

Multiply the values by 1.5 for sensor/seal combination marked (•) and fortransmitter for absolute measurement.

ledoMrosneS

edoCDTrofotpu

RD462RP462

SotE 1:01 )naps%560.0+LRU%40.0(±

B 1:5 )naps%01.0+LRU%60.0(±

RV462 SotE 1:01 )naps%31.0+LRU%80.0(±

RN/RH462 SotG 1:01 )naps%560.0+LRU%40.0(±

RH462 V 1:01 )naps%01.0+LRU%60.0(±


9

Physical Specification(Refer to ordering information sheets for variant availability related tospecific model or versions code)

Materials

Model 264DR only – Side without seal

Process isolating diaphragms (*)

AISI 316 L ss; Hastelloy C276™; Monel 400™; Tantalum;

Hastelloy C276™ on AISI 316 L ss gasket seat.

A remote seal can be selected with required diaphragm (refer below)

Process flanges, adapters, plugs and drain/vent valves (*)

AISI 316 L ss; Hastelloy C276™; Monel 400™.

Bolts and nuts

AISI 316 ss bolts Class A4–80 and nuts Class A4-70 per UNI 7323(ISO 3506);

AISI 316 ss bolts and nuts Class A4–50 per UNI 7323 (ISO 3506), incompliance with NACE MR0175 Class II.

Gaskets (*)

Viton™; PTFE.

Models 264DR/PR/VR/HR/NR

Blind flange (reference and/or remote seal(s) side)

AISI 316 L ss

Seal side process diaphragm (remote seal) (*)

AISI 316 L ss; Hastelloy C276™ ; Tantalum;AISI 316 L ss or Hastelloy C276™ with anti-stick coating;AISI 316 L ss with anti-corrosion coating; AISI 316 L ss gold plated;Superduplex ss (UNS S32750 to ASTM SA479);Diaflex (AISI with anti-abrasion treatment).

Extension material

AISI 316 L ss (also for Diaflex and gold plated diaphragms);Hastelloy C276™;AISI 316 L ss or Hastelloy C276™ with coating same as diaphragm

Seal side fill fluid (remote seal)

Silicone oil-DC200™, Silicone oil-AN140™, Inert-Halocarbon™4.2,Inert-Galden™, Silicone Polymer-Syltherm XTL™, Vegetable oil-Neobee M-20™, Glycerin Water, Mineral oil-MARCOL 82™, ABB fill.

Sensor fill fluid

Silicone oil (DC200™); inert fill (Halocarbon™4.2 or Galden™).

Sensor housing

AISI 316 L ss.

Electronic housing and covers

Barrel version

– Copper-free content aluminium alloy with baked epoxy finish;

– Low-copper content aluminium alloy with baked epoxy finish;

– AISI 316 L ss.

DIN version

– Low-copper content aluminium alloy with baked epoxy finish.

Covers O-ring

Buna N.

Local zero and span adjustments:

Glass filled polycarbonate plastic (removable).

Tagging

AISI 316ss data plate attached to the electronics housing.

CalibrationStandard: at maximum span, zero based range, ambient temperatureand pressure;

Optional: at specified range and ambient conditions;.

Optional extras

Output indicator

plug-in rotatable type, LCD or analog.

Supplemental customer tag

AISI 316 ss tag screwed/fastened to the transmitter for customer's tagdata up to a maximum of 20 characters and spaces on one line for tagnumber and tag name, and up to a maximum of 3 spaced strings of 10characters each for calibration details (lower and upper values plusunit). Special typing evaluated on request for charges.

Surge protection (only as external unit for PROFIBUS PA and FF)

Test Certificates (test, design, calibration, material traceability)

Tag and manual language

Communication connectors

Process connectionson conventional flanges : 1/4 – 18 NPT on process axis

on adapters : 1/2 – 14 NPT on process axis

fixing threads: 7/16 – 20 UNF at 41.3mm centre distance

Refer to seal data sheet for process connection variants throughremote seal.

Electrical connectionsTwo 1/2 – 14 NPT or M20x1.5 or PG 13.5 or 1/2 GK threadedconduit entries, direct on housing.

Special communication connector (on request)

– HART : straight or angle Harting Han connector and one plug.

– FOUNDATION Fieldbus, PROFIBUS PA: M12x1 or 7/8.

Terminal block

HART version: three terminals for signal/external meter wiring up to2.5mm2 (14AWG) and three connection points for test andcommunication purposes.

Fieldbus versions: two terminals for signal wiring (bus connection)up to 2.5mm2 (14AWG)

Grounding

Internal and external 6mm2 (10AWG) ground termination points areprovided.

Mounting positionTransmitter can be mounted in any position.Electronics housing may be rotated to any position. A positive stopprevents over travel.

Mass (without options and seals)– models 264DR/PR/VR : 3kg approx (7lb)

– models 264HR/NR: 1.7kg approx (4lb)

Add 1.5kg (3.4lb) for AISI housing.Add 650g (1.5lb) for packing.

PackingCarton

(*) Wetted parts of the transmitter.

(**) U-bolt material: AISI 400 ss; screws material: high-strength alloy steel orAISI 316 ss.


10

ConfigurationTransmitter with HART communication and 4 to 20 mA

Standard configuration

Transmitters are factory calibrated to customer's specified range.Calibrated range and tag number are stamped on the tag plate. If acalibration range and tag data are not specified, the transmitter will besupplied with the plate left blank and configured as follows:

Engineering Unit kPa4 mA Zero20 mA Upper Range Limit (URL)Output LinearDamping 1 sec.Transmitter failure mode UpscaleSoftware tag (8 characters max) BlankOptional LCD indicator/display 0 to 100.0% linear

Any or all the above configurable parameters, including Lower range–valueand Upper range-value which must be the same unit of measure, can beeasily changed using the HART hand–held communicator or by a PCrunning the configuration software SMART VISION with DTM for 2600T.The transmitter database is customized with specified flange type andmaterial, O–ring and drain/vent materials and meter code option.Custom configuration (option)The following data may be specified in addition to the standardconfiguration parameters:

Descriptor 16 alphanumeric charactersMessage 32 alphanumeric charactersDate Day, month, year

Transmitter with PROFIBUS PA communicationTransmitters are factory calibrated to customer's specified range.Calibrated range and tag number are stamped on the tag plate. If acalibration range and tag data are not specified, the transmitter will besupplied with the plate left blank and configured as follows:

Measure Profile PressureEngineering Unit kPaOutput scale 0% Lower Range Limit (LRL)Output scale 100% Upper Range Limit (URL)Output LinearHi-Hi Limit Upper Range Limit (URL)Hi Limit Upper Range Limit (URL)Low Limit Lower Range Limit (LRL)Low-Low Limit Lower Range Limit (LRL)Limits hysteresis 0.5% of output scalePV filter 0 sec.Address (settable by local key) 126Tag 32 alphanumeric characters

Any or all the above configurable parameters, including Lower range-valueand Upper range–value which must be the same unit of measure, can beeasily changed by a PC running the configuration software SMART VISIONwith DTM for 2600T.The transmitter database is customized with specified flange type andmaterial, O–ring and drain/vent materials and meter code option.Custom configuration (option)The following data may be specified in addition to the standardconfiguration parameters:

Descriptor 32 alphanumeric charactersMessage 32 alphanumeric charactersDate Day, month, year

Transmitter with FOUNDATION FieldbuscommunicationTransmitters are factory calibrated to customer's specified range.Calibrated range and tag number are stamped on the tag plate. If acalibration range and tag data are not specified, the transmitter will besupplied with the plate left blank and the analog input function block FB1is configured as follows:

Measure Profile PressureEngineering Unit kPaOutput scale 0% Lower Range Limit (LRL)Output scale 100% Upper Range Limit (URL)Output LinearHi-Hi Limit Upper Range Limit (URL)Hi Limit : Upper Range Limit (URL)Low Limit Lower Range Limit (LRL)Low-Low Limit Lower Range Limit (LRL)Limits hysteresis 0.5% of output scalePV filter time 0 sec.Tag 32 alphanumeric characters

The analog input function block FB2 is configured for the sensor tempe-rature measured in °C. Any or all the above configurable parameters,including the range values, can be changed using any host compliant toFOUNDATION fieldbus. The transmitter database is customized withspecified flange type and material, O–ring and drain/vent materials andmeter code option.

For any protocol available engineering units of pressure measure are :Pa, kPa, MPainH2O@4°C, mmH2O@4°C, psiinH2O@20°C, ftH2O@20°C, mmH2O@20°CinHg, mmHg, Torrg/cm2, kg/cm2, atmmbar, bar

™ Hastelloy is a Cabot Corporation trademark

™ Monel is an International Nickel Co. trademark

™ Viton is a Dupont de Nemour trademark

™ DC200 is a Dow Corning Corporation trademark

™ Galden is a Montefluos trademark

™ Halocarbon is a Halocarbon Products Co. trademark

™ AN140 is a Wacker-Chemie trademarl

™ Neobee M20 is a Stepan Company trademark

™ Marcol is a Esso Italiana trademarl

™ Syltherm is a Dow Chemical Company trademark


11

54 (2.13)

62 (2.44) 43 (1.69)

135

(5.3

1)

+

82 (3

.23)

127 (5.00)17 (0.67)

26 (1.02)17 (0.67)

36 (1.42)

MOUNTING DIMENSIONS (not for construction unless certified) - dimensions in mm (in)264DR/PR/VR transmitter on bracket for vertical or horizontal 60mm (2in) pipe mounting (barrel housing)

Consider one capillary only to remote seal for 264PR/VR

Certificationlabel

Identification tagAdjustments

Terminalside

Electronicside

Integral displayhousing

Min. clearanceto removethe cover

Output meterhousing

Barrel typehousing

Electricalconnections

Coverlockingscrew

Note : For 264DR side with 1/4 – 18 NPT thread director with 1/2 – 14 NPT through adapter, threaded process connection, gasketgroove and gaskets are in accordance with DIN 19213.Bolting threads for fixing adapter or other devices (i.e. manifod etc.) on process flange is 7/16 – 20 UNF.

Flange

To remoteseal

43 (1.69 71 (2.80)

54 (2.13)

135

(5.3

1)

+

82 (3

.23)

127 (5.00)17 (0.67)

26 (1.02)17 (0.67)

36 (1.42)

166

(6.5

4)

38 (1.50) 51 (2.01)41

.3 (1

.63)

63 (2

.48)

55 (2.17)

S

NOSSTIUCRIC

SEL

NOI

NETS

OST U

RREV

UOCE

LRE

DRAG

TNE' M

EF NE BELCI

QUAT

E

ALSTIU

CRIC

IVE

H

COPE

EK

VERTIGT

E

H

WN

!

86 (3.39)

70 (2.75)

70 (2

.75)


12

264DR/PR/VR transmitter on bracket for vertical or horizontal 60mm (2in) pipe mounting (DIN housing)


17 (0.67)

41.3 (1.63)

63 (2.48)

179 (7.05)

38 (1

.50)

51 (2

.01)

55 (2

.17)

148 (5.83)36 (1.42)

26 (1

.02)

17 (0

.67)

82 (3.23)

102

(4.0

2)

82 (3.23)

S

NOS

STIUCRI C SEL

NOINET

SOS

TU

RRE

VUOC

ELRED

RAG

TNE'

MEF

NEBEL

CI

QUAT

E

ALSTI UCRI C

IVE

H

COPE

EK

VER

TIGT

E

H

WN

!

264DR/PR/VR transmitter on bracket for vertical or horizontal 60mm (2in) pipe mounting

Cover lockingscrew

Certificationlabel

Identificationtag

To remoteseal

DIN typehousing

Terminal side

Externalground

Flange

Electronicside

Certificationlabel

Adjustments

Output meterhousing


55 (2.17) max 7 (0.28)

142

(5.5

9)

86 (3.39)

S

NOSSTIUCRIC

SEL

NOI

NETS

OST U

RREV

UOCE

LRE

DRAG

TNE' M

EF NE BELCI

QUAT

E

ALSTIUCRI

C

IVE

H

COPE

EK

VERTIGT

E

H

WN

!


13

70 (2

.75)

S

NOS

STIUCRI C SEL

NOINET

SOS

TU

RRE

VUOC

ELRED

RAG

TNE'

MEF

NEBEL

CI

QUAT

E

ALSTI UCRI C

IVE

H

COPE

EK

VER

TIGT

E

H

WN

!

264DR/PR/VR transmitter on bracket for wall mounting (by up to four M8 screws; NOT SUPPLIED)

264DR/PR/VR transmitter on flat type (for box) bracket for vertical or horizontal 60mm (2in) pipe mounting

70 (2

.75)

70 (2.75)

25 (1

)


204

(8.0

3)

70 (2.75)

84 (3

.31)

70 (2

.75)

98 (3.86)

+

25 (0.98)

47 (1.85)

S

NOSSTIUCRIC

SEL

NOI

NETS

OST U

RREV

UOCE

LRE

DRAG

TNE' M

EF NE BELCI

QUAT

E

ALSTIU

CRIC

IVE

H

COPE

EK

VERTIGT

E

H

WN

!


14

18 (0

.71)

ø 65 (2.56)

135 (5.31)

16 (0

63)

13 (0

.51)

40 (1

.57)

100

(3.9

4)

127 (5.00)17 (0.67)

26 (1.02)17 (0.67)

36 (1.42)


Cover lockingscrew

To remoteseal

Min. Bend Radius150 (6)

264HR/NR transmitter on bracket for 60mm (2in) pipe mounting (barrel housing)

Sensors G, H, M, P, Q, S

264HR transmitter on bracket for 60mm (2in) pipe mounting (barrel housing)

Sensor V

100

(3.9

4)

56 (2.20)

135 (5.31)

46 (1

.81)

127 (5.00)

17 (0.67)26 (1.02)

17 (0.67)36 (1.42)

40 (1

.57)

86 (3.39)

S

NOSSTIUCRIC

SEL

NOI

NETS

OST U

RREV

UOCE

LRE

DRAG

TNE' M

EF NE BELCI

QUAT

E

ALSTIUCRI

C

IVE

H

COPE

EK

VERTIGT

E

H

WN

!Electrical

connections

Cover lockingscrew

Min. Bend Radius150 (6)

To remoteseal

170

(6.6

9)

S

NOSSTIUCRIC

SEL

NOI

NETS

OST U

RREV

UOCE

LRE

DRAG

TNE' M

EF NE BELCI

QUAT

E

ALSTIUCRI

C

IVE

H

COPE

EK

VERTIGT

E

H

WN

!

86 (3.39)

70 (2.75)


15

Electrical connectionsHART Version

FIELDBUS Versions

+

+

-

-

++

--691HT

A B C

1

D E F

2

G H I

3

J K L

4

M N O

5

P Q R

6

S T U

7

V W X

8

Y Z #

9

@ % & /

0

+-

PV

REVIEW SERIALLINK

TRIM

F1 F2 F3 F4

CONF

M

Kent-Taylor

0

43

56 7 8

9

1020

40

0

60

100%

2 80

M+

-

- 1

54 6

23 8

7

+

TEST COMM

Internal groundtermination point

Fieldbus line(polarity independent)

External groundtermination point

Test points4 to 20mA

Hartingpin (male)

identification

Internal groundtermination point

External groundtermination point

Hand-heldcommunicator

GND

Line load

Remoteindicator

Powersource

250 ohm min

Receiver

HART hand-held communicator may be connected at any wiring termination point in the loop, providing the minimum resistanceis 250 ohm. If this is less than 250 ohm, additional resistance should be added to allow communications

Optional

BUS CONNECTIONS

2

1

4

3

1 3

42

7/8” connector

M12 x 1 connector

NOITACIFITNEDI)elam(NIPNOITADNUOF

subdleiFSUBIFORP

AP11111222223333344444

-FF+FF

DLEIHSDNUORG

+APDNUORG

–APDLEIHS

CONNECTOR IS SUPPLIED LOOSE WITHOUT MATING FEMALE PLUG


16

BASIC ORDERING INFORMATION model 264DR Differential Pressure Transmitter with remoteseal(s)Select one character or set of characters from each category and specify complete catalog number.Refer to additional ordering information code and specify one or more codes for each transmitter if additional options are required.Quote separately one or two seals as required.

LEDOMESAB 1– ts 5ot ht sretcarahc 2 6 4 D R X S X X X d'tnoC

%570.0YCARUCCAESAB–)s(laesetomerhtiwrettimsnarTerusserPlaitnereffiD

–stimilnapS-ROSNES 6 ht retcarahcaPk4dna2.0

aPk61dna45.0aPk04dna76.0


aPk006dna01aPk0042dna04


rabm04dna2rabm061dna4.5rabm004dna7.6rabm056dna11

rabm0061dna7.62rab6dna1.0

rab42dna4.0rab08dna43.1

rab061dna76.2

Hni61dna8.0 2OHni46dna61.2 2OHni061dna76.2 2OHni062dna53.4 2OHni246dna7.01 2Oisp78dna54.1isp843dna8.5

isp0611dna4.91isp0232dna7.83

BEFGHMPQS

edocesU 7– ht retcarahc S

)strapdettew(diulflliF/lairetammgarhpaiD 8– ht retcarahc

ssL613ISIA)taesISIAno(™672CyolletsaH

™672CyolletsaH™004lenoM

mulatnaTssL613ISIA

)taesISIAno(™672CyolletsaH™672CyolletsaH

™004lenoMmulatnaT

ssL613ISIA)taesISIAno(™672CyolletsaH

™672CyolletsaH™004lenoM

mulatnaTssL613ISIAssL613ISIAssL613ISIA

lioenociliSlioenociliSlioenociliSlioenociliSlioenociliS

nedlaG-diulftrenInedlaG-diulftrenInedlaG-diulftrenInedlaG-diulftrenInedlaG-diulftrenI

nobracolaH-diulftrenInobracolaH-diulftrenInobracolaH-diulftrenInobracolaH-diulftrenInobracolaH-diulftrenI

lioenociliSnedlaG-diulftrenI

nobracolaH-diulftrenI

)yletarapesdetouqebotlaeseno()yletarapesdetouqebotlaeseno()yletarapesdetouqebotlaeseno()yletarapesdetouqebotlaeseno()yletarapesdetouqebotlaeseno()yletarapesdetouqebotlaeseno()yletarapesdetouqebotlaeseno()yletarapesdetouqebotlaeseno()yletarapesdetouqebotlaeseno()yletarapesdetouqebotlaeseno()yletarapesdetouqebotlaeseno()yletarapesdetouqebotlaeseno()yletarapesdetouqebotlaeseno()yletarapesdetouqebotlaeseno()yletarapesdetouqebotlaeseno()yletarapesdetouqebotslaesowt()yletarapesdetouqebotslaesowt()yletarapesdetouqebotslaesowt(

)3etoN()3etoN()3etoN()3etoN()3etoN(

)3,1setoN()3,1setoN()3,1setoN()3,1setoN()3,1setoN()3,1setoN()3,1setoN()3,1setoN()3,1setoN()3,1setoN(

)2etoN()3,1setoN()3,1setoN(

ECANECANECANECAN

ECANECANECANECAN

ECANECANECANECAN

SHKMTABFCDLQP45R2W

)strapdettew(noitcennocdnalairetamsretpada/segnalfssecorP – 9 ht retcarahc

noitcurtsnocslaesowtrofssL613ISIA)noitcennoclatnoziroH(ssL613ISIA)noitcennoclatnoziroH(ssL613ISIA

1/4 (tceridf-TPN81– 7/ 61 )gnillird.S.UFNU02–1/2 (retpadahguorhtf-TPN41– 7/ 61 )gnillird.S.UFNU02–1/4 (tceridf-TPN81– 7/ 61 )gnillird.S.UFNU02–1/2 (retpadahguorhtf-TPN41– 7/ 61 )gnillird.S.UFNU02–1/4 (tceridf-TPN81– 7/ 61 )gnillird.S.UFNU02–1/2 (retpadahguorhtf-TPN41– 7/ 61 )gnillird.S.UFNU02–

)4etoN()5etoN()5etoN(

)6,5setoN()6,5setoN()6,5setoN()6,5setoN(

ECANECANECANECANECANECANECAN

RAB

)noitcennoclatnoziroH(™672CyolletsaH)noitcennoclatnoziroH(™672CyolletsaH

DE

)noitcennoclatnoziroH(™004lenoM)noitcennoclatnoziroH(™004lenoM

GH

)strapdettew(teksaG/stloB 01– ht retcarahc

noitcurtsnocslaesowtrofsteksagtuohtiw)ECAN(ss613ISIAnoitcurtsnocslaesowtrofsteksagtuohtiwss613ISIA

ss613ISIAss613ISIA

)ECAN(ss613ISIA)ECAN(ss613ISIA

™notiVEFTP™notiV

EFTP

)4etoN()4etoN()5etoN(

)5,1setoN()5etoN(

)5,1setoN(

ECAN

ECANECAN

RS1234


17

RD462NOITAMROFNIGNIREDROCISAB X X

noitcennoclacirtcelednalairetamgnisuoH 11– ht retcarahc

)noisrevlerraB(yollamuinimulA)noisrevlerraB(yollamuinimulA)noisrevlerraB(yollamuinimulA)noisrevlerraB(yollamuinimulA)noisrevlerraB(yollamuinimulA)noisrevlerraB(yollamuinimulA

1/2 TPN41–)02MC(5.1x02M

5.31gP1/2 KG

rotcennocnaHgnitraHrotcennocsubdleiF

)ylnoesopruplareneg()ylnoesopruplareneg(


)ylnoesopruplareneg()ylnoesopruplareneg()ylnoesopruplareneg()ylnoesopruplareneg(

)7etoN()7etoN(

)7etoN()7etoN(

)7etoN(

)7etoN(

ABDCEG

)noisrevlerraB(eerf-reppocyollamuinimulA)noisrevlerraB(eerf-reppocyollamuinimulA)noisrevlerraB(eerf-reppocyollamuinimulA)noisrevlerraB(eerf-reppocyollamuinimulA)noisrevlerraB(eerf-reppocyollamuinimulA)noisrevlerraB(eerf-reppocyollamuinimulA

1/2 TPN41–)02MC(5.1x02M

5.31gP1/2 KG


HLNMPR

)noisrevlerraB(ssL613ISIA)noisrevlerraB(ssL613ISIA)noisrevlerraB(ssL613ISIA)noisrevlerraB(ssL613ISIA)noisrevlerraB(ssL613ISIA

1/2 TPN41–)02MC(5.1x02M

5.31gP1/2 KG

rotcennocsubdleiF

STVUZ

)noisrevNID(yollamuinimulA)noisrevNID(yollamuinimulA)noisrevNID(yollamuinimulA

)02MC(5.1x02M5.31gP

rotcennocnaHgnitraH

JYK

snoitpolanoitiddA/tuptuO 21– ht retcarahc

Am02ot4dnanoitacinummoclatigidTRAHAm02ot4dnanoitacinummoclatigidTRAH

APSUBIFORPAPSUBIFORP

subdleiFNOITADNUOFsubdleiFNOITADNUOF

snoitpolanoitiddaoN)"edocgniredrolanoitiddA"ybderedroebot(detseuqersnoitpO



)9,8setoN()8etoN(

)9,8setoN()9etoN(

)9,8setoN()9etoN(

H1P2F3


18

ADDITIONAL ORDERING INFORMATION for model 264DRAdd one or more 2-digit code(s) after the basic ordering information to select all required options

XX XX XX XX XX XX XX XX XX d'tnoC

)strapdettew()noitisopdnalairetam(evlavtnev/niarDssL613ISIAssL613ISIAssL613ISIA

™672CyolletsaH™672CyolletsaH™672CyolletsaH

™004lenoM™004lenoM™004lenoM

sixassecorpnopotedisegnalfno

mottobedisegnalfnosixassecorpno

potedisegnalfnomottobedisegnalfno

sixassecorpnopotedisegnalfno

mottobedisegnalfno

)01etoN()01etoN()01etoN()11etoN()11etoN()11etoN()21etoN()21etoN()21etoN(

ECANECANECANECANECANECANECANECANECAN

1V2V3V4V5V6V7V8V9V

noitacifitreclacirtcelEaixEEytefaScisnirtnI–DG1yrogetaCIIpuorGXETA

dxEEfoorpemalF–DG2/1yrogetaCIIpuorGXETA)31etoN(ecnailpmocngisedLnxEE"N"noitcetorpfoepyT–DG3yrogetaCIIpuorGXETA

ylno()ASC(noitaicossAdradnatSnaidanaC 1/2 )noitcennoclacirtcele5.31gPdna02M,TPN41–)subdleiFNOITADNUOFdnaAPSUBIFORProfnxEdnaaixEtoN(AASailartsuAsdradnatS

htiwylno(lavorppa)MF(lautuMyrotcaF 1/2 )noitcennoclacirtcele5.31gPdna02M,TPN41–foorpemalFdnaytefaScisnirtnI-XETAdenibmoC

htiwylno(ASCdnaMF,XETAdenibmoC 1/2 )31etoN()noitcennoclacirtcele5.31gPdna02M,TPN41–)3edoctuptuOFFrofelbaliavatoN(aixEytefaScisnirtnI-)anihC(ISPEN

dxEfoorpemalF-)anihC(ISPENaixEE)aissuR(TSOGdxEE)aissuR(TSOG

aixEE)natsikazaK(TSOGdxEE)natsikazaK(TSOG

)31etoN(aixEE)lizarB(ortemnI)31etoN(dxEE)lizarB(ortemnI)31etoN(LnxEE)lizarB(ortemnI

1E2E3E4E5E6E7ENEYEZE1W2W3W4W5W6W7W

retemtuptuO

noitarbilacdradnatS,reteMorPnoitarbilaclaicepS,reteMorP

elacs%001–0raenilrotacidnituptuogolanAelacs01–0toorerauqsrotacidnituptuogolanA

)elacsraenilrofdeificepsebot(noitaudarglaiceps,rotacidnituptuogolanA)elacstoorerauqsrofdeificepsebot(noitaudarglaiceps,rotacidnituptuogolanA

)reteMoC(rotarugifnocTRAHdnaretemlangiselbammargorP)noitarugifnocremotsuc–reteMoC(rotarugifnocTRAHdnaretemlangiselbammargorP

)31etoN()31etoN()31etoN()31etoN()31etoN()31etoN()31etoN()31etoN(

1D2D3D4D5D6D7D8D

DCLlargetnIyalpsidlargetniDCLlatigiD 1L

)lairetamdnaepahs(tekcarbgnitnuoMgnitnuomepiproFgnitnuomepiproFgnitnuomllawroFgnitnuomllawroF

xobrofepyttalF

)gnisuohISIArofelbatiustoN()gnisuohISIArofelbatiustoN()gnisuohISIArofelbatiustoN()gnisuohISIArofelbatiustoN(

leetsnobraCssL613ISIAleetsnobraCssL613ISIAssL613ISIA

1B2B3B4B5B

egruS)Am02-4/TRAHroflanretnI(rotcetorPtneisnarT/egruS

ylnosubdleiFNOITADNUOFdnaAPSUBIFORProfesooldeilppuslanretxE(rotcetorPtneisnarT/egruShtiwelbatius 1/2 )TSUDon,snoitacifitrecASCdnaMF,XETAhtiwdnanoitcennoclacirtcele02MdnaTPN41–

1S

launamgnitarepOnamreG

nailatIhcnerF

1M2M4M

egaugnalgat&slebaLnamreG

nailatIhcnerF

1T2T4T

etalpgatlanoitiddAetalpleetssselniatsnogatfognitnirpresaL 2I


19

Note 1: Suitable for oxygen service

Note 2: Not wetted – Hastelloy C276™ on AISI seat for sensor code B

Note 3: Not wetted – Not available with sensor code B

Note 4: Not available with diaphragm/fill code S, H, K, M, T, A, B, F, C, D, L, Q, P, 4, 5

Note 5: Not available with diaphragm/fill code R, 2, W.

Note 6: Not available with diaphragm material/fill fluid code S, H, A, B, L, Q

Note 7: Select type in additional ordering code

Note 8: Not available with Electronic Housing code Z, R, G

Note 9: Not available with Electronic Housing code P, E and K

Note 10: Not available with Process flanges/adapters code D, E, G, H, R

Note 11: Not available with Process flanges/adapters code A, B, G, H, R

Note 12: Not available with Process flanges/adapters code A, B, D, E, R

Note 13: Not available with PROFIBUS PA and FF output code 2 or 3

Note 14: Not available with Electronic housing code U, S, T, V, H, M, L, N, D, C, A, B, J, Y

™ Hastelloy is a Cabot Corporation trademark

™ Monel is an International Nickel Co. trademark

™ Viton is a Dupont de Nemour trademark



Standard delivery items (can be differently specified by additional ordering code)– Adapters supplied loose

– Plug on axis (no drain/vent valves)

– General purpose (no electrical certification)

– No meter/display, no mounting bracket, no surge protection

– English manual and labels

– Configuration with kPa and deg. C units

– No test, inspection or material traceability certificates

THE SELECTION OF SUITABLE WETTED PARTS AND FILLING FLUID FOR COMPATIBILITY WITH THE PROCESS MEDIA IS A CUSTOMER'SRESPONSIBILITY, IF NOT OTHERWISE NOTIFIED BEFORE MANUFACTURING.

XX XX XX XX

noitarugifnoCHni=erusserP–dradnatS 2 F.ged=erutarepmeT;C°02taisp/OHni=erusserP–dradnatS 2 F.ged=erutarepmeT;C°4taisp/OHni=erusserP–dradnatS 2 C.ged=erutarepmeT;C°02taisp/OHni=erusserP–dradnatS 2 C.ged=erutarepmeT;C°4taisp/O

motsuC

2N3N4N5N6N

setacifitreC

)tniop-9(noitarbilacfo1.3–40201NEetacifitrecnoitcepsnIngisedtnemurtsnifo1.2–40201NEredroehthtiwecnailpmocfoetacifitreC

1C6C

ytilibaecartlairetaM

strapdettewssecorpfo1.2–40201NEredroehthtiwecnailpmocfoetacifitreCstrapdettewssecorpfo1.3–40201NEetacifitrecnoitcepsnI

1H3H

rotcennoC

)gulpelamefgnitamtuohtiwesooldeilppus(-)subdleiFNOITADNUOFrofdednemmoceR(8/7subdleiF)gulpelamefgnitamtuohtiwesooldeilppus(-)APSUBIFORProfdednemmoceR(1x21MsubdleiF

yrtnethgiarts–naHgnitraHyrtneelgna–naHgnitraH


1U2U3U4U


20

BASIC ORDERING INFORMATION model 264PR Gauge Pressure Transmitter with remote sealSelect one character or set of characters from each category and specify complete catalog number.Refer to additional ordering information code and specify one or more codes for each transmitter if additional options are required.

LEDOMESAB 1– ts 5ot ht sretcarahc 2 6 4 P R X S X X X X X

%570.0YCARUCCAESAB–laesetomerhtiwrettimsnarTerusserPeguaG

–stimilnapS-ROSNES 6 ht retcarahcaPk61dna45.0aPk04dna76.0




rabm061dna4.5rabm004dna7.6rabm056dna11



rab061dna76.2

Hni46dna61.2 2OHni061dna76.2 2OHni062dna53.4 2OHni246dna7.01 2Oisp78dna54.1isp843dna8.5


EFGHMPQS


diulflliF/lairetammgarhpaiD 8– ht retcarahc

ssL613ISIAssL613ISIAssL613ISIA



)yletarapesdetouqebotlaeseno()yletarapesdetouqebotlaeseno()yletarapesdetouqebotlaeseno(

)1etoN()1etoN(

R2W

lairetamsretpada/segnalfssecorP – 9 ht retcarahc

noitcurtsnoclaesrofssL613ISIA R

stloB 01– ht retcarahc

noitcurtsnoclaesrofsteksagtuohtiw)ECAN(ss613ISIAnoitcurtsnoclaesrofsteksagtuohtiwss613ISIA

ECAN RS




)noisrevlerraB(ssL613ISIA)noisrevlerraB(ssL613ISIA)noisrevlerraB(ssL613ISIA)noisrevlerraB(ssL613ISIA)noisrevlerraB(ssL613ISIA)noisrevNID(yollamuinimulA)noisrevNID(yollamuinimulA)noisrevNID(yollamuinimulA

1/2 TPN41–)02MC(5.1x02M

5.31gP1/2 KG


1/2 TPN41–)02MC(5.1x02M

5.31gP1/2 KG


1/2 TPN41–)02MC(5.1x02M

5.31gP1/2 KG

rotcennocsubdleiF)02MC(5.1x02M

5.31gProtcennocnaHgnitraH




)2etoN()2etoN(

)2etoN()2etoN(

)2etoN(

)2etoN(

ABDCEGHLNMPRSTVUZJYK








)4,3setoN()3etoN(

)4,3setoN()4etoN(

)4,3setoN()4etoN(

H1P2F3


21

ADDITIONAL ORDERING INFORMATION for model 264PRAdd one or more 2-digit code(s) after the basic ordering information to select all required options

XX XX XX XX XX XX XX XX XX XX XX XXnoitacifitreclacirtcelE

aixEEytefaScisnirtnI–DG1yrogetaCIIpuorGXETAdxEEfoorpemalF–DG2/1yrogetaCIIpuorGXETA

)5etoN(ecnailpmocngisedLnxEE"N"noitcetorpfoepyT–DG3yrogetaCIIpuorGXETAylno()ASC(noitaicossAdradnatSnaidanaC 1/2 )noitcennoclacirtcele5.31gPdna02M,TPN41–

)subdleiFNOITADNUOFdnaAPSUBIFORProfnxEdnaaixEtoN(AASailartsuAsdradnatShtiwylno(lavorppa)MF(lautuMyrotcaF 1/2 )noitcennoclacirtcele5.31gPdna02M,TPN41–

foorpemalFdnaytefaScisnirtnI-XETAdenibmoChtiwylno(ASCdnaMF,XETAdenibmoC 1/2 )5etoN()noitcennoclacirtcele5.31gPdna02M,TPN41–

)3edoctuptuOFFrofelbaliavatoN(aixEytefaScisnirtnI-)anihC(ISPENdxEfoorpemalF-)anihC(ISPEN

aixEE)aissuR(TSOGdxEE)aissuR(TSOG




retemtuptuO


elacs%001–0raenilrotacidnituptuogolanA)elacsraenilrofdeificepsebot(noitaudarglaiceps,rotacidnituptuogolanA


)5etoN()5etoN()5etoN()5etoN()5etoN()5etoN(

1D2D3D5D7D8D



xobrofepyttalF



1B2B3B4B5B



1S


nailatIhcnerF

1M2M4M


nailatIhcnerF

1T2T4T



motsuC

2N3N4N5N6N

setacifitreC


1C6C



1H3H

rotcennoC




1U2U3U4U


22




Note 4: Not available with Electronic Housing code P, E and K


Note 6: Not available with Electronic housing code U, S, T, V, H, M, L, N, D, C, A, B, J, Y



Standard delivery items (can be differently specified by additional ordering code)– General purpose (no electrical certification)







23

BASIC ORDERING INFORMATION model 264HR Gauge Pressure Transmitter with remote seal

Select one character or set of characters from each category and specify complete catalog number.Refer to additional ordering information code and specify one or more codes for each transmitter if additional options are required.

LEDOMESAB 1– ts 5ot ht sretcarahc 2 6 4 H R X X X X X

%570.0YCARUCCAESAB–laesetomerhtiwrettimsnarTerusserPeguaG


aPk061dna76.2aPk006dna01



rabm056dna11rabm0061dna7.62



rab006dna02

Hni062dna53.4 2OHni246dna7.01 2Oisp78dna54.1isp843dna8.5

isp0611dna4.91isp0232dna7.83isp0078dna092

GHMPQSV

diulflliF/lairetammgarhpaiD 7– ht retcarahc)Vrosnesrof672CyolletsaH(ssL613ISIA

ssL613ISIAssL613ISIA


nobracolaH-diulftrenI)1etoN()1etoN(

R2W

noitcennocssecorP – 8 ht retcarahc

)epytnottubtpecxe(laesetomeRlaesetomerepytnottuB

)yletarapesdetouqebotlaeseno()yletarapesdetouqebotlaesnottubeno( )2etoN(

RG



1/2 TPN41–)02MC(5.1x02M

5.31gP1/2 KG




)ylnoesopruplareneg(

)3etoN()3etoN(

)3etoN()3etoN(

)3etoN(

ABDCEG


1/2 TPN41–)02MC(5.1x02M

5.31gP1/2 KG


HLNMPR


1/2 TPN41–)02MC(5.1x02M

5.31gP1/2 KG

rotcennocsubdleiF

STVUZ








)5,4setoN()4etoN(

)5,4setoN()5etoN(

)5,4setoN()5etoN(

H1P2F3


24

ADDITIONAL ORDERING INFORMATION for model 264HRAdd one or more 2-digit code(s) after the basic ordering information to select all required options

XX XX XX XX XX XX XX XX XX XX XX XX










retemtuptuO





1D2D3D5D7D8D

DCLlargetnI

yalpsidlargetniDCLlatigiD 1L

)lairetamdnaepahs(tekcarbgnitnuoM

gnitnuomepiproFgnitnuomepiproF

)gnisuohISIArofelbatiustoN( leetsnobraCssL613ISIA

1B2B

egruS

)Am02-4/TRAHroflanretnI(rotcetorPtneisnarT/egruSylnosubdleiFNOITADNUOFdnaAPSUBIFORProfesooldeilppuslanretxE(rotcetorPtneisnarT/egruS

htiwelbatius 1/2 )TSUDon,snoitacifitrecASCdnaMF,XETAhtiwdnanoitcennoclacirtcele02MdnaTPN41–1S

launamgnitarepO

namreGnailatIhcnerF

1M2M4M

egaugnalgat&slebaL

namreGnailatIhcnerF

1T2T4T

etalpgatlanoitiddA

etalpleetssselniatsnogatfognitnirpresaL 2I

noitarugifnoC

Hni=erusserP–dradnatS 2 F.ged=erutarepmeT;C°02taisp/OHni=erusserP–dradnatS 2 F.ged=erutarepmeT;C°4taisp/OHni=erusserP–dradnatS 2 C.ged=erutarepmeT;C°02taisp/OHni=erusserP–dradnatS 2 C.ged=erutarepmeT;C°4taisp/O

motsuC

2N3N4N5N6N

setacifitreC


1C6C



1H3H

rotcennoC




1U2U3U4U


25

Note 1: Suitable for oxygen service - NOT AVAILABLE FOR SENSOR V

Note 2: Not available with sensor code G, H, M, P



Note 5: Not available with Electronic Housing code P, E


Note 7: Not available with Electronic housing code U, S, T, V, H, M, L, N, D, C, A, B










26

BASIC ORDERING INFORMATION model 264VR Absolute Pressure Transmitter with remote seal


LEDOMESAB 1– ts 5ot ht sretcarahc 2 6 4 V R X S X X X X X

%570.0YCARUCCAESAB–laesetomerhtiwrettimsnarTerusserPetulosbA





aPk00061dna762

rabm061dna4.5rabm004dna7.6rabm056dna11



rab061dna76.2

gHmm021dna4gHmm003dna5gHmm084dna8

gHmm0021dna02isp78dna54.1isp843dna8.5


EFGHMPQS


diulflliF/lairetammgarhpaiD 8– ht retcarahc

ssL613ISIAssL613ISIAssL613ISIA



)yletarapesdetouqebotepytnoinutpecxelaeseno()yletarapesdetouqebotepytnoinutpecxelaeseno()yletarapesdetouqebotepytnoinutpecxelaeseno(

)1etoN()1etoN(

R2W

lairetamsretpada/segnalfssecorP – 9 ht retcarahc

noitcurtsnoclaesrofssL613ISIA R

stloB 01– ht retcarahc

noitcurtsnoclaesrofsteksagtuohtiw)ECAN(ss613ISIAnoitcurtsnoclaesrofsteksagtuohtiwss613ISIA

ECAN RS




)noisrevlerraB(ssL613ISIA)noisrevlerraB(ssL613ISIA)noisrevlerraB(ssL613ISIA)noisrevlerraB(ssL613ISIA)noisrevlerraB(ssL613ISIA)noisrevNID(yollamuinimulA)noisrevNID(yollamuinimulA)noisrevNID(yollamuinimulA

1/2 TPN41–)02MC(5.1x02M

5.31gP1/2 KG


1/2 TPN41–)02MC(5.1x02M

5.31gP1/2 KG


1/2 TPN41–)02MC(5.1x02M

5.31gP1/2 KG

rotcennocsubdleiF)02MC(5.1x02M

5.31gProtcennocnaHgnitraH




)2etoN()2etoN(

)2etoN()2etoN(

)2etoN(

)2etoN(

ABDCEGHLNMPRSTVUZJYK








)4,3setoN()3etoN(

)4,3setoN()4etoN(

)4,3setoN()4etoN(

H1P2F3


27

ADDITIONAL ORDERING INFORMATION for model 264VRAdd one or more 2-digit code(s) after the basic ordering information to select all required options

XX XX XX XX XX XX XX XX XX XX XX XXnoitacifitreclacirtcelE

aixEEytefaScisnirtnI–DG1yrogetaCIIpuorGXETAdxEEfoorpemalF–DG2/1yrogetaCIIpuorGXETA

)5etoN(ecnailpmocngisedLnxEE"N"noitcetorpfoepyT–DG3yrogetaCIIpuorGXETAylno()ASC(noitaicossAdradnatSnaidanaC 1/2 )noitcennoclacirtcele5.31gPdna02M,TPN41–

)subdleiFNOITADNUOFdnaAPSUBIFORProfnxEdnaaixEtoN(AASailartsuAsdradnatShtiwylno(lavorppa)MF(lautuMyrotcaF 1/2 )noitcennoclacirtcele5.31gPdna02M,TPN41–

foorpemalFdnaytefaScisnirtnI-XETAdenibmoChtiwylno(ASCdnaMF,XETAdenibmoC 1/2 )5etoN()noitcennoclacirtcele5.31gPdna02M,TPN41–

)3edoctuptuOFFrofelbaliavatoN(aixEytefaScisnirtnI-)anihC(ISPENdxEfoorpemalF-)anihC(ISPEN

aixEE)aissuR(TSOGdxEE)aissuR(TSOG




retemtuptuO





1D2D3D5D7D8D



xobrofepyttalF



1B2B3B4B5B



1S


nailatIhcnerF

1M2M4M


nailatIhcnerF

1T2T4T



motsuC

2N3N4N5N6N

setacifitreC


1C6C



1H3H

rotcennoC




1U2U3U4U


28




Note 4: Not available with Electronic Housing code P, E, K


Note 6: Not available with Electronic housing code U, S, T, V, H, M, L, N, D, C, A, B, J, Y.










29


BASIC ORDERING INFORMATION model 264NR Absolute Pressure Transmitter with remote seal

LEDOMESAB 1– ts 5ot ht sretcarahc 2 6 4 N R X X X X X

%570.0YCARUCCAESAB–laesetomerhtiwrettimsnarTerusserPetulosbA




aPk00061dna762

rabm056dna11rabm0061dna7.62



gHmm084dna8gHmm0021dna02



GHMPQS

diulflliF/lairetammgarhpaiD 7– ht retcarahcssL613ISIAssL613ISIAssL613ISIA


nobracolaH-diulftrenI)1etoN()1etoN(

R2W

noitcennocssecorP – 8 ht retcarahc

laesetomeR )yletarapesdetouqebotsepytnoinudnanottubtpecxelaeseno( R



1/2 TPN41–)02MC(5.1x02M

5.31gP1/2 KG




)ylnoesopruplareneg(

)3etoN()3etoN(

)3etoN()3etoN(

)3etoN(

ABDCEG


1/2 TPN41–)02MC(5.1x02M

5.31gP1/2 KG


HLNMPR


1/2 TPN41–)02MC(5.1x02M

5.31gP1/2 KG

rotcennocsubdleiF

STVUZ








)5,4setoN()4etoN(

)5,4setoN()5etoN(

)5,4setoN()5etoN(

H1P2F3


30

ADDITIONAL ORDERING INFORMATION for model 264NRAdd one or more 2-digit code(s) after the basic ordering information to select all required options

XX XX XX XX XX XX XX XX XX XX XX XX










retemtuptuO





1D2D3D5D7D8D

DCLlargetnI

yalpsidlargetniDCLlatigiD 1L

)lairetamdnaepahs(tekcarbgnitnuoM

gnitnuomepiproFgnitnuomepiproF

)gnisuohISIArofelbatiustoN( leetsnobraCssL613ISIA

1B2B

egruS

)Am02-4/TRAHroflanretnI(rotcetorPtneisnarT/egruSylnosubdleiFNOITADNUOFdnaAPSUBIFORProfesooldeilppuslanretxE(rotcetorPtneisnarT/egruS

htiwelbatius 1/2 )TSUDon,snoitacifitrecASCdnaMF,XETAhtiwdnanoitcennoclacirtcele02MdnaTPN41–1S

launamgnitarepO

namreGnailatIhcnerF

1M2M4M

egaugnalgat&slebaL

namreGnailatIhcnerF

1T2T4T

etalpgatlanoitiddA

etalpleetssselniatsnogatfognitnirpresaL 2I

noitarugifnoC

Hni=erusserP–dradnatS 2 F.ged=erutarepmeT;C°02taisp/OHni=erusserP–dradnatS 2 F.ged=erutarepmeT;C°4taisp/OHni=erusserP–dradnatS 2 C.ged=erutarepmeT;C°02taisp/OHni=erusserP–dradnatS 2 C.ged=erutarepmeT;C°4taisp/O

motsuC

2N3N4N5N6N

setacifitreC


1C6C



1H3H

rotcennoC




1U2U3U4U


31


Note 2: Not used



Note 5: Not available with Electronic Housing code P, E


Note 7: Not available with Electronic housing code U, S, T, V, H, M, L, N, D, C, A, B









2600T Pressure TransmittersModel 264DR, 264PR, 264HR, 264VR, 264NR

ABB LtdHoward Road, St. NeotsCambridgeshire, PE19 8EUUKTel: +44(0)1480 475321Fax: +44(0)1480 217948

ABB Inc.125 E. County Line RoadWarminster, PA 18974USATel: +1 215 674 6000Fax: +1 215 674 7183

ABB SACE spaBusiness Unit InstrumentationVia Statale 11322016 Lenno (CO) ItalyTel: +39 0344 58111Fax: +39 0344 56278

SS

/264

XR_5

ABB has Sales & Customer Supportexpertise in over 100 countries worldwide

www.abb.com/instrumentation

The Company’s policy is one of continuous productimprovement and the right is reserved to modify the

information contained herein without notice.

Printed in Italy (12.06)

© ABB 2006

Documents

SS/264XR 5 2600T Series Pressure Transmitters · 2018-05-09 · 2600T Pressure Transmitters Model 264DR, 264PR, 264HR, 264VR, 264NR SS/264XR_5 2 Functional Specifications Range and