Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Standard Carousel
HD514061 HYH1410
Assembly
1 2
3
HYH1410
4
Important Notes:
Do not use a power driver for this product installation
Part letter identification is shown for service part purposesEnsure packaging is disposed of in a safe
environmentally friendly way
Instructions should only be used with full height doorsand not standard height
15kg maximum load per tray
Steel Pin x1
Carousel Tray x2
Lower Plug x2
Upper Plug x2
IMPORTANT:The ‘notch’ should point towards
the back RH side of the cabinet when fitted
Carousel Tray x2
Rail x1
Screw x4(15mm CSK)
H
H
I
L
B
A
Shelf Support BossF
C
414mm
363mm
414mm363mm
Note: Make sure the dimensionsare accurately spiked.
VIEW ON BASE PANELAlso transfer the dimensions to the top cross member
Follow the installation manual for fixing the standard carousel into the cabinet.IMPORTANT: Ensure the cabinet is level, plumb and secured to the wall before installingthis product.
Note: The hole indicated shouldonly be used when fitting full height
doors to the cabinet
‘Notch’
Note: The ‘notch’ in the base platemust face towards the back RH sideof the cabinet when fitted
HD514061
5 6
7
L Rail Support Bracket x1
L Steel Pin x2Screw x4
(15mm csk)
Note: Ensure the notch on the tube is
460mm Hole
76mm Hole
facing towards the bottom as shown
HYH1410