Upload
arun-packrat
View
222
Download
8
Embed Size (px)
DESCRIPTION
Standard Format of BOQ
Citation preview
Sinewave Electromechanical Services W.L.L
document.xlsx Tender Documents
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
(QR) QR DHS
Plumbing and Drainage Installation
1 150mm diameter pipe with concrete surround m #VALUE! -
UPVC rain water pipes and fittings including bends to
BS 4576 with seal ring or solvent welded joints and
concrete surrounds complete as described
1 100mm Diameter pipe m #VALUE! -
2 100mm Vent pipe m #VALUE! -
UPVC Pipe for Surface water
1 150mm Diameter UPVC surface water pipe m #VALUE! -
2 100mm UPVC pipe to (1.80m) soak away m #VALUE! -
1 Roof Rain water outlet No #VALUE! -
2 vent cowl-100 mm m #VALUE! -
1 40mm Diameter pipe m #VALUE! -
2 50mm Diameter pipe m #VALUE! -
3 150 mm Diameter Main Waste Pipe m #VALUE! -
4 100mm Diameter Soil & Waste pipe m #VALUE! -
To Collection QR -
Page 1
ESVC pipe laid and joined underground as describe in the specifications and as shown on drawings
Approved rain water outlet and vent cowl complete as described in the drawings
UPVC soil and waste pipes and fittings including bends to BS 4660 with seal ring or solvent welded joints laid in abouve ground / under ground
Sinewave Electromechanical Services W.L.L
document.xlsx Tender Documents
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
(QR) QR DHS
Approved deep seal UPVC floor drain and floor cleanout
complete with "P" or "S" trap including connections to
waste and drain pipes as described
1 Floor Drain No #VALUE! -
2 Floor Clean Out No #VALUE! -
3 Man Hole No #VALUE! -
4 Gully trap No #VALUE! -
5 Rodding Eye No #VALUE! -
Approved sanitary appliances complete with all accessories, fittings, waste, traps and fixing in position including alljoints to services and drains plugging and screwingas necessary to the structure as described, refer Drawing
A Water closet with cistern, seat and cover; Ref. WC No #VALUE! -
B Urinals; Ref. UR No #VALUE! -
C Marble urinal partition No #VALUE! -
DNo #VALUE! -
all as specified in specification and as shown on drawings.
E Toilet paper holder; Ref. TPH No #VALUE! -
F Liquid Soap dispenser; Ref. LSD No #VALUE! -
G Dry machine; Ref. DM No #VALUE! -
H Hand spray; Ref. HS No #VALUE! -
J Robe hooks; Ref. RH No #VALUE! -
K Ablution faucet tap No #VALUE! -
L Soap holder; Ref. SH No #VALUE! -
M Stainless steel grip bar No #VALUE! -
N Grab bars; 1100mm length No #VALUE! -
APPLIANCES AND ACCESSORIES (Cont'd)
Accessories complete with jointing components, pluggingand screwing to concrete or block work; all as specified inspecification and as shown on drawings. (Cont'd)
A Facial mirror; approximate size 1650 x 900 mm No #VALUE! -
B Ditto; but approximate size 1500 x 900 mm No #VALUE! -
To Collection QR -
Page 2
Kitchen sink Accessories complete with jointing components, plugging and screwing to concrete or block work;
Sinewave Electromechanical Services W.L.L
document.xlsx Tender Documents
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
(QR) QR DHS
PPR pipes to EN ISO 15874, For Hot & Cold Water Installation
Cold Water
1 50mm Diameter pipe m #VALUE! -
2 32mm Diameter pipe m #VALUE! -
3 22mm Diameter Cold water pipe to fixture m #VALUE! -
4 15 mm Diameter Cold water pipe to fixture m #VALUE! -
5 22 mm Diameter hot water pipe m #VALUE! -
6 15 mm Diameter hot water pipe m #VALUE! -
7 32mm Diameter drain & vent pipe m #VALUE! -
8 28mm Diameter PVC riser from 3rd Floor m #VALUE! -
1 Insulation for hot water pipe m #VALUE! -
VALVES AND FITTINGS
1 28 mm Isolating Valve No #VALUE! -
2 28mm Non-return valve No #VALUE! -
3 28mm Stop valve No #VALUE! -
4 32mm drain valve No #VALUE! -
Water heaters
1 50 ltr water heater No #VALUE! -
To Collection QR -
Page 3
Preformed flexible nitrite rubber insulation (thermal conductivity 0.037 W/M° K at 24°C) fixing with approved adhesive and sealing joints as specified; clad with hammered aluminium sheeting.
Sinewave Electromechanical Services W.L.L
document.xlsx Tender Documents
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
(QR) QR DHS
PUMPS
1No #VALUE! -
2 Transfer pump 4ltrs/sec@20m TDH No #VALUE! -
3 Booster pump (1 duty + 1 stand by)-1ltr/sec@4bar No #VALUE! -
Water Tanks
1 GRP sectional storage tank(7100 gallon)(26 m3) No #VALUE! -
2 1500 gallon water tank (5.67 m3) No #VALUE! -
Fire water tank
1 2.6mx3mx2m Steel fire water tank(15.60 m3) No #VALUE! -
Water Meter
1 No #VALUE! -
2 No #VALUE! -
3 42mm Fire water (water meter will be supplied by karahamaa) No #VALUE! -
Sump pit complete with manhole cover and frame,excavation, disposal, backfilling, concrete work/blockswork, waterproofing, channelling, internal finishes, as detailon drawing and as specified in specification.
C Sump pit; size 1250x1250x1500mm deep No #VALUE! -
To Collection QR -
Page 4
1-Li/Sec@ 10M TDH
Sub water meter fixing for flats water meter will be supplied by karahamaa
Main water meter fixing ( water meter will be supplied by karahamaa)
Sinewave Electromechanical Services W.L.L
document.xlsx Tender Documents
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
(QR) QR DHS
IRRIGATION SYSTEM
Irrigation pipe and fittings including laying or fixinghorizontally or vertically with brackets. clip hangers. trustblocks and supports plugged and screwed to concrete orblock work ; all as specified in specification and shown ondrawings.
Am #VALUE! -
uPVC pipes and fittings laid in horizontally or verticallyincluding laying or fixing with brackets. clip hangers.emitters. trust blocks and supports plugged and screwed toconcrete or block work ; all as specified in specification and
Bm #VALUE! -
C Main supply line. up to solenoid valve; 3" diameter m #VALUE! -
D Ditto; 2" diameter m #VALUE! -
E m #VALUE! -
F Ditto; 1" diameter m #VALUE! -
G Ditto; 3/4" diameter m #VALUE! -
H m #VALUE! -
J Ditto; 1" diameter m #VALUE! -
K Ditto; 3/4" diameter m #VALUE! -
PE pipes and fittings laid in as specified including allnecessary works all as describe in the specifications and as
L shown on drawings. Polyethylene; 1/2" diameter m #VALUE! -
IRRIGATION SYSTEM (Cont'd)
Accessories and fittings. fixed complete. as detailed in thedrawing and as described in the specification.
A Bubblers; flow rate 2.0 GPM No #VALUE! -
B Solenoid valve. flow rate 30.0 GPM; Ref. SV1 No #VALUE! -
C Ditto. flow rate 32.0 GPM; Ref. SV2 No #VALUE! -
D No #VALUE! -
E Air release valve; 2" diameter No #VALUE! -
Irrigation controller
K
Item #VALUE! -
To Collection QR -
Irrigation water line; Pipes filling irrigation water tank; 54mm diameter
shown on drawings. Main supply line. from fire water tank to irrigation pump; 3" diameter
Lateral line. from solenoid valve to bubblers; 11/2" diameter
Lateral line. from solenoid valve to drip in-line; 11/2" diameter
Quick coupling valve; 3/4" diameter
Irrigation controller including all field wires from controller to electric valve. well protected complete with necessary accessories including necessary service connections. builder's work all in accordance with specification and approved by the Engineer.
Sinewave Electromechanical Services W.L.L
document.xlsx Tender Documents
Page 5
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
(QR) QR DHS
IRRIGATION SYSTEM INSTALLATION
Irrigation system equipment. complete with controllers.pressure vessel. all valves. flexible connectors.interconnecting piping and connection to services etc..complete as specified in specification and shown ondrawings.
A
No #VALUE! -
BNo #VALUE! -
C Flow meter with 3" dia GI discharge pipe No #VALUE! -
D Sub water meter No #VALUE! -
Note: Water filling from sub water meter to irrigation watertank measured under this section.
Electrically driven vertical multi stage Irrigation booster pump set (one duty and one stand by); complete with controllers. all interconnecting valves and accessories with water tank and sand filter. 24 hrs lead/lag automatic change over. variable frequency drive. flexible connection. valves. pressure switch. pressure gauges. etc and other required accessories and all required works as specified; capacity 2L/sec and 2.5KW; Ref. IRP1
Vertical cylindrical sand filter with automatic backwash; complete with all required accessories. by pass pipe and all other required works as specified; capacity 2L/sec; Ref. SF2
Sinewave Electromechanical Services W.L.L
document.xlsx Tender Documents
To Collection QR -
Page 6
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
(QR) QR DHS
1 Cleaning and painting all brackets, supports and exposed Item #VALUE! -
2 Provide marking positions of the holes, mortises, chases
and like structure Item #VALUE! -
3 Provide all pipe sleeves in accordance with the drawing Item #VALUE! -
4 Allow for all other builders work Item #VALUE! -
Sundries
1 Provide all working drawing for approval by the Engineer Item #VALUE! -
2 provide as-built drawings for approval by the Engineer Item #VALUE! -
3 Provide labels etc for indentification of plant and
equipment, valves and the like item #VALUE! -
4 provide operation and maintenace manuals item #VALUE! -
5 provide for complete testing and commissioning Item #VALUE! -
Builders work in connection with plumbing and drainage installations
Sinewave Electromechanical Services W.L.L
document.xlsx Tender Documents
To Collection QR -
Page 7
Sinewave Electromechanical Services W.L.L
document.xlsx Tender Documents
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
(QR) QR DHS
COLLECTION
PAGE-1 -
PAGE-2 -
PAGE-3 -
PAGE-4 -
PAGE-5 -
PAGE-6 -
PAGE-7 -
To Collection QR -
Page 8
Sine Wave Electromechanical Services W.L.L
document.xlsx Tender Documents
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
(QR) QR DHS
1
` No #VALUE! -
CAPACITOR BANK PANEL
1No #VALUE! -
2No #VALUE! -
3No #VALUE! -
4No #VALUE! -
5No #VALUE! -
6 SMB-5-100A Incoming TP MCCB and outgoing (2x60A TP MCCB) No #VALUE! -
7 SMB-6-100A Incoming TP MCCB and outgoing (2x60A TP MCCB) No #VALUE! -
8No #VALUE! -
HV Switchgear, designed and manufactured as per Engineer's
drawings and specification and to configurations shown on
1 No #VALUE! -
Transformers
1 No #VALUE! -
CABLES
1 Cables from Transformer to MV panel 7 x 1c x 630 mm2 Mtr #VALUE! -
XLPE/SWA/LSF
2 LV cable termination in the tranformer Item #VALUE! -
To Collection QR -
Page 1
Metal clad free standing or wall mounted Main switch Board/Sub main switch board board complete as described including copper bushbars and ACB incomer and Acb/MCCB'S outgoings with all interconnections and instrumentation refer details on Drawing
MV-PANEL-1; 10 ways, 1600A 4P ACB (DOT); 2Nr 350A TP ACB; 2Nr 300 A TP MCCB; 1 x 500 A TP MCCB, 3 x 40 A TP MCCB,3x 100 A MCCB , 1x 80 A MCCB breakers foroutgoing circuits; instrumentation, metering, surge protection devices etc; complete as shown on drawings
Multi step automatic switching capacitor bank with reactive powerregulator; 250 kvar
SMB-1-300A Incoming TP MCCB and outgoing (7x50A TP MCCB and 2x60A TP MCCB)
SMB-2-350A Incoming TP MCCB and outgoing (2x50A TP MCCB and 8x60A TP MCCB)
SMB-3-350A Incoming TP MCCB and outgoing (2x50A TP MCCB and 8x60A TP MCCB)
SMB-4-300A Incoming TP MCCB and outgoing (2x50A TP MCCB and 6x60A TP MCCB)
SMB-7-80A Incoming TP MCCB to (2x40A TP MCCB and 2x60A TP MCCB)
and 6100; installed in accordance with manufactures recommendations including all associated builders work
HV Swithgear; HV room club house; 11 kV with 2 Nr 630A drawn out type VCB incoming mains; 1 Nr 630A busbar 31.5 kA for 1 secs; including CTM; 1Nr 630 Amp TP VCBs; power protection; ammeters; earths; complete as shown on drawings
Power transformers complete, manufactured and tested as specified to configurations shown on Drawing ; installed in accordance with manufactures recommendations including all associated builders work
11kV/415V; 1600kVA oil type transformer; complete as shown on drawings
Sine Wave Electromechanical Services W.L.L
document.xlsx Tender Documents
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
(QR) QR DHS
Metal clad free standing or wall mounted distrubutionboard complete as described including isolating switchbusbard, ELCB's, MCB's and all interconnections- referdetails on Drawing
1 DB-1G,DB-9G(8-Way TP DB) No #VALUE! -
2 DB-2G,DB-6G,DB-8G(8-Way TP DB) No #VALUE! -
3 DB-3G,DB-7G(8-Way TP DB) No #VALUE! -
4 DB-4G(6-Way DP DB) No #VALUE! -
5 No #VALUE! -
6 No #VALUE! -
7 DB-3F,DB-8F & DB-3S,DB-8S No #VALUE! -
8 DB-1T,DB-10T(8-Way TP DB) No #VALUE! -
9 DB-2T,DB-4T,DB-7T,DB-9T(8-Way TP DB) No #VALUE! -
10 DB-3T,DB-8T(8-Way TP DB) No #VALUE! -
11 DB-5T,DB-6T(8-Way TP DB) No #VALUE! -
12 DB-5P,DB-6P(8-Way TP DB) No #VALUE! -
13 DB-LL(8-Way TP DB) No #VALUE! -
14 DB-11 No #VALUE! -
15 DB-MV(6-Way DP DB) No #VALUE! -
To Collection QR -
Page 2
DB-1F,DB-5F,DB-6F,DB-10F & DB-1S,DB-5S,DB-6S,DB-10S(8-Way TP DB)
DB-2F,DB-4F,DB-7F,DB-9F & DB-2S,DB-4S,DB-7S,DB-9S(8-Way TP DB)
Sine Wave Electromechanical Services W.L.L
document.xlsx Tender Documents
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
(QR) QR DHS
Approved Electrical wires and cables laid on and includingtrunking, trays and or conduits complete with terminationand PVC shrouds
14Cx16mm2 PVC/PVC + 1Cx16mm2 PVC/ECC from SMB-1 to DB-1G
m #VALUE! -
24Cx16mm2 PVC/PVC + 1Cx16mm2 PVC/ECC from SMB-1 to DB-2G
m #VALUE! -
34Cx16mm2 PVC/PVC + 1Cx16mm2 PVC/ECC from SMB-1 to DB-3G
m #VALUE! -
44Cx25mm2 PVC/PVC + 1Cx16mm2 PVC/ECC from SMB-1 to DB-4G
m #VALUE! -
54Cx25mm2 PVC/PVC + 1Cx16mm2 PVC/ECC from SMB-1 to DB-5G
m #VALUE! -
64Cx16mm2 PVC/PVC + 1Cx16mm2 PVC/ECC from SMB-1 to DB-6G
m #VALUE! -
74Cx16mm2 PVC/PVC + 1Cx16mm2 PVC/ECC from SMB-1 to DB-7G
m #VALUE! -
84Cx16mm2 PVC/PVC + 1Cx16mm2 PVC/ECC from SMB-1 to DB-8G
m #VALUE! -
94Cx16mm2 PVC/PVC + 1Cx16mm2 PVC/ECC from SMB-1 to DB-9G
m #VALUE! -
104Cx16mm2 PVC/PVC + 1Cx16mm2 PVC/ECC from SMB-2 to DB-1F
m #VALUE! -
114Cx16mm2 PVC/PVC + 1Cx16mm2 PVC/ECC from SMB-2 to DB-2F
m #VALUE! -
124Cx25mm2 PVC/PVC + 1Cx16mm2 PVC/ECC from SMB-2 to DB-3F
m #VALUE! -
134Cx16mm2 PVC/PVC + 1Cx16mm2 PVC/ECC from SMB-2 to DB-4F
m #VALUE! -
144Cx16mm2 PVC/PVC + 1Cx16mm2 PVC/ECC from SMB-2 to DB-5F
m #VALUE! -
154Cx16mm2 PVC/PVC + 1Cx16mm2 PVC/ECC from SMB-2 to DB-6F
m #VALUE! -
164Cx16mm2 PVC/PVC + 1Cx16mm2 PVC/ECC from SMB-2 to DB-7F
m #VALUE! -
174Cx25mm2 PVC/PVC + 1Cx16mm2 PVC/ECC from SMB-2 to DB-8F
m #VALUE! -
184Cx16mm2 PVC/PVC + 1Cx16mm2 PVC/ECC from SMB-2 to DB-9F
m #VALUE! -
194Cx16mm2 PVC/PVC + 1Cx16mm2 PVC/ECC from SMB-2 to DB-10F
m #VALUE! -
204Cx25mm2 PVC/PVC + 1Cx16mm2 PVC/ECC from SMB-3 to DB-1S
m #VALUE! -
214Cx25mm2 PVC/PVC + 1Cx16mm2 PVC/ECC from SMB-3 to DB-2S
m #VALUE! -
To Collection QR -
Sine Wave Electromechanical Services W.L.L
document.xlsx Tender Documents
Page 3
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
(QR) QR DHS
224Cx25mm2 PVC/PVC + 1Cx16mm2 PVC/ECC from SMB-3 to DB-3S
m #VALUE! -
234Cx25mm2 PVC/PVC + 1Cx16mm2 PVC/ECC from SMB-3 to DB-4S
m #VALUE! -
244Cx25mm2 PVC/PVC + 1Cx16mm2 PVC/ECC from SMB-3 to DB-5S
m #VALUE! -
254Cx25mm2 PVC/PVC + 1Cx16mm2 PVC/ECC from SMB-3 to DB-6S
m #VALUE! -
264Cx25mm2 PVC/PVC + 1Cx16mm2 PVC/ECC from SMB-3 to DB-7S
m #VALUE! -
274Cx25mm2 PVC/PVC + 1Cx16mm2 PVC/ECC from SMB-3 to DB-7S
m #VALUE! -
284Cx16mm2 PVC/PVC + 1Cx16mm2 PVC/ECC from SMB-3 to DB-8S
m #VALUE! -
294Cx25mm2 PVC/PVC + 1Cx16mm2 PVC/ECC from SMB-3 to DB-9S
m #VALUE! -
304Cx25mm2 PVC/PVC + 1Cx16mm2 PVC/ECC from SMB-3 to DB-10S
m #VALUE! -
314Cx25mm2 PVC/PVC + 1Cx16mm2 PVC/ECC from SMB-4 to DB-1T
m #VALUE! -
324Cx25mm2 PVC/PVC + 1Cx16mm2 PVC/ECC from SMB-4 to DB-2T
m #VALUE! -
334Cx16mm2 PVC/PVC + 1Cx16mm2 PVC/ECC from SMB-4 to DB-3T
m #VALUE! -
344Cx25mm2 PVC/PVC + 1Cx16mm2 PVC/ECC from SMB-4 to DB-4T
m #VALUE! -
354Cx25mm2 PVC/PVC + 1Cx16mm2 PVC/ECC from SMB-4 to DB-7T
m #VALUE! -
ELECTRIC METER
1 Sub meter fixing for flats water meter will be supplied by karahamaa No #VALUE! -
2 No #VALUE! -
Earthing ,Bonding and Lightning Protection
1 Item #VALUE! -
(only 4 nos earth pit consider)
Main meter fixing for flats water meter will be supplied by karahamaa
Complete earthing bonding and lightining protection as per qatar regulation and as shown in the drawing
Sine Wave Electromechanical Services W.L.L
document.xlsx Tender Documents
To Collection QR -
Page 4
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
(QR) QR DHS
Small Power Installation
PVC cables enclosed in and including rigid conduit and
or trunking where necessary complete as described
1 13 A Single switched socket outlet point No #VALUE! -
2 13 A Twin switched socket outlet point No #VALUE! -
3 20A Double pole switch point No #VALUE! -
4 30A Double pole switch point No #VALUE! -
5 20A Flexible outlet for Heater,Exhaust fan,Split AC point No #VALUE! -
6 45A Cooker control unit point No #VALUE! -
7 Call bell point No #VALUE! -
9 Bell Transformer point No #VALUE! -
Approved fittings and accessories complete as describedincluding final connection
1 13 A Single switched socket outlet No #VALUE! -
2 13 A Twin switched socket outlet No #VALUE! -
3 20A Double pole switch No #VALUE! -
4 30A Double pole switch No #VALUE! -
5 20A Flexible outlet for Heater,Exhaust fan,Split AC No #VALUE! -
6 45A Cooker control unit No #VALUE! -
8 Bell Push No #VALUE! -
9 Call Bell with Transformer No #VALUE! -
Lighting Installation
1 switch Lighting point No #VALUE! -
2 Lighting point No #VALUE! -
PVC cables enclosed in rigid conduits, trays and/pr trunking where necessary complete as described
Sine Wave Electromechanical Services W.L.L
document.xlsx Tender Documents
To Collection QR -
Page 5
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
(QR) QR DHS
Approved lighting luminaires complete with diffusers,
bulbs, ceiling rose including hangers, brackers, supports
necessary fixing accessories and final connection
1 Ceiling Mounted light fittings No #VALUE! -
2 Wall mounted light fittings No #VALUE! -
3 Wall mounted weather proof light fittings No #VALUE! -
4 Recessed mounted weather proof light fitting No #VALUE! -
5 Surface mounted W/P double tubes fluorescent light fitting No #VALUE! -
Sine Wave Electromechanical Services W.L.L
document.xlsx Tender Documents
To Collection QR -
Page 6
Sine Wave Electromechanical Services W.L.L
document.xlsx Tender Documents
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
(QR) QR DHS
1 One Gang One way Lighting switch No #VALUE! -
2 One Gang Two way Lighting switch No #VALUE! -
3 Two gang one way Lighting switch No #VALUE! -
4 3 Gang One way Lighting switch No #VALUE! -
1 40A Isolator for lift No #VALUE! -
2 100A Isolator for Fire pump No #VALUE! -
1 100mm cable tray Mtr #VALUE! -
2 150mm cable tray Mtr #VALUE! -
3 200mm cable tray Mtr #VALUE! -
4 300mm Cable tray Mtr #VALUE! -
To Collection QR -
Page 7
Approved fittings and accessories complete as described including final connection
Isolating switches complete with painted mild steel angle support frame where necessary
G.I. cable tray /Basket including necessary fixing complete as described
Sine Wave Electromechanical Services W.L.L
document.xlsx Tender Documents
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
(QR) QR DHS
Telephone Installation
1 Telephone outlet No #VALUE! -
1 Telephone outlet No #VALUE! -
Telephone fitting and accessories
1 150x150x100mm Telephone Junction box No #VALUE! -
2 600x600x150mm Telephone Junction box No #VALUE! -
3 300x300x100mm Telephone Junction box No #VALUE! -
4 Main Distribution Frame No #VALUE! -
Telephone Duct Cable tray
1 25mm PVC duct m #VALUE! -
2 32mm PVC duct m #VALUE! -
3 32mm PVC riser m #VALUE! -
4 50mm PVC duct m #VALUE! -
5 90mm PVC duct m #VALUE! -
6 300mm cable tray to upper floor m #VALUE! -
7 200mm cable tray passes through basement ceiling m #VALUE! -
TV ACCESS INSTALLATION.
1 Coaxial TV outlets. No #VALUE! -
1 Coaxial TV outlets. No #VALUE! -
3 150x150x100mm TV Junction box for flats No #VALUE! -
3 300x300x100mm TV Junction box for floor No #VALUE! -
TV fitting and accessories
1 200x200x100mm TV Junction pull box No #VALUE! -
TV Ducts
1 32mm Riser m #VALUE! -
To Collection QR -
Equipment, fitting and accessories complete with fascia plate covers as specified.
Structured cabling with CAT-6 telephone cables (up to the fibre optic / structured cable converter) as specified drawn in concealed conduits.
Cabling as specified (up to the fibre optic / structured cable converter) in concealed conduits.
Sine Wave Electromechanical Services W.L.L
document.xlsx Tender Documents
Page 8
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
(QR) QR DHS
LOW CURRENT
Low Current equipment including wiring; fitted and finished as per drawings and Specifications
CCTV SYSTEM INSTALLATION
AItem #VALUE! -
B Fixed CCTV camera No #VALUE! -
C CCTV Junction box Item #VALUE! -
ACCESS CONTROL SYSTEM INSTALLATION
Provide and install access control system includingnecessary conduiting, wiring and fixing equipmentscomplete with all conduit accessories, back boxes, coverplate, supports, all as specified in specification and shownon drawings (cable trays and duct measured separately)
AItem #VALUE! -
B Control panel; Ref. DCP No #VALUE! -
C Magnetic strip No #VALUE! -
D Entrance card reader; CR No #VALUE! -
BUILDING MANAGEMENT SYSTEM INSTALLATION
Supply and install Building Management System (BMS)including all equipments with UPS, computers, monitors andprinters, network connection to all mechanical and electricalequipment, cables and connection to services etc., and allcomplete as per Specification and drawings.
E BMS system complete to integrate all other services Item #VALUE! -
To Collection QR -
Provide and install CCTV system including necessary conduiting, wiring and fixing equipments complete with all conduit accessories, back boxes, cover plate, supports, all as specified in specification and shown on drawings (cable trays and duct measured separately)
CCTV work station (including server, sequential and sequential/spot, etc); complete with all required works all as per drawings and specifications.
Access control system; complete with all required works all as per drawings and specifications. Ref. ACS
Sine Wave Electromechanical Services W.L.L
document.xlsx Tender Documents
Page 9
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
(QR) QR DHS
PUBLIC ADDRESS SYSTEM INSTALLATION
Provide and install PA system including necessaryconduiting, wiring and fixing equipments complete with allconduit accessories, back boxes, cover plate, supports, all asspecified in specification and shown on drawings (cabletrays and duct measured separately)
A
Item #VALUE! -
B Wall mounted speakers No #VALUE! -
C Ceiling mounted speakers; Ref. S6 No #VALUE! -
D PA Junction box Item #VALUE! -
LIGHTING CONTROL SYSTEM
Cables including tray, trunking, junction box & conduits complete
with accessories, supports in final sub-circuits to (cont'd.)
A Lighting control panel, LCP -RF1 No #VALUE! -
B Lighting control panel, LCP -RF No #VALUE! -
C Presence sensor No #VALUE! -
D Motion sensors No #VALUE! -
To Collection QR -
Public address system equipment rack comprising power amplifier unit, paging microphone, monitor unit, Audio mixer, speaker selector unit, mp3 player, radio tuner, power control unit, automatic timed announcement, terminal board, speakers, etc.. and all required works all as specified and shown on drawings.
Sine Wave Electromechanical Services W.L.L
document.xlsx Tender Documents
Page 10
Sine Wave Electromechanical Services W.L.L
document.xlsx Tender Documents
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
(QR) QR DHS
Builder's work
1 Allow for all builder's work in connection with Electrical
Installations Item #VALUE! -
Sundries
1 Provide all working drawing for approval by the Engineer Item #VALUE! -
2 Provide as built drawing for approval by the Engineer item #VALUE! -
3 Provide all plates, discs, labels etc for identification of
plant and equipment and the like Item #VALUE! -
4 Provide operating and maintenance manuals as directed
by the Engineer Item #VALUE! -
5 Provide complete testing and commissioning to the
installations Item #VALUE! -
To Collection QR -
Page 11
Sine Wave Electromechanical Services W.L.L
document.xlsx Tender Documents
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
(QR) QR DHS
COLLECTION
PAGE-1 -
PAGE-2 -
PAGE-3 -
PAGE-4 -
PAGE-5 -
PAGE-6 -
PAGE-7 -
PAGE-8 -
PAGE-9 -
PAGE-10 -
PAGE-11 -
To Collection QR -
Page 12
Sinewave Electromechanical Services W.L.L
document.xlsx Tender Documents
Item Description Qty Unit Rate QR. AMOUNTQR
Fire Fighting System
1 65mm Diameter dry pipe m #VALUE! -
265mm Diameter Fire pipe run at H/L from fire pump room to riser
m #VALUE! -
3 m #VALUE! -
4 40mm Diameter fire pipe run at H/L m #VALUE! -
5 100mm Diameter Pipe for dry m #VALUE! -
To Collection QR 0.00Page 1
ERW GI pipe schedule 40 ASTM GR A53 and fittings as specified with screwed or grooved / flanged joints; include for surface preparation and painting as specified; on and including supports.
50mm Diameter Fire pipe for fire hose reel(Riser) from basement to 3rd floor wet
Sinewave Electromechanical Services W.L.L
document.xlsx Tender Documents
Item Description Qty Unit Rate QR. AMOUNTQR
1 Flow switch No #VALUE! -
2 Landing valve No #VALUE! -
3 65mm Dia OS&Y gate valve No #VALUE! -
4 100mm Dia non-return valve No #VALUE! -
5 32mm Dia gate valve for FHR No #VALUE! -
1 50 Dia Automatic air release valve No #VALUE! -
Fire Fighting System contd.
FIRE FIGHTING PUMP
1 Set #VALUE! -
1 Fire Breeching inlet with cabinet, 2way. With Check Valve No #VALUE! -
1 Upright Early suppression Fast response Sprinkler nr #VALUE! -
2 Upright Standard response Sprinkler nr #VALUE! -
3 Pendent Standard response Sprinkler nr #VALUE! -
To Collection QR 0.00Page 2
Valve and accessories with screwed or flanged joints; jointing to pipe works
Automatic air release with all necessary fittingsand accessories connected to the pipe work.
Fire Fighting Pump With all accessories 50GPM (Electrical, Diesel & Jockey) with complete fire room fittings.
Fire department Siamese, connection asembly with two inlets consist of 65 mm diameter instantaneous male couplings toBS 336 and non-return valves complete with capings,, falnged outlet including all ancillaries and accessories as specified and to Civil Defense Department's approval; jointing to pipework
Sprinkler head, bulb type as mentioned,complete with two pieces adjustableescutcheon in polished stainless steel plate;jointing to pipe works
Sinewave Electromechanical Services W.L.L
document.xlsx Tender Documents
Item Description Qty Unit Rate QR. AMOUNTQR
1 6kg dry powder fire extinguisher No #VALUE! -
2 4.5kg Powder fire extinguisher No #VALUE! -
3 Fire blanket No #VALUE! -
Fire Hose Reel Cabinet
1 Fire Hose Reel Cabinet No #VALUE! -
Clean Agent Fire Suppression System; FM 200
Clean Agent Fire Suppression System; comprising thecontrol panel. manual discharge switch. abort switch. strobelights and alarm horn. entrance sign. exit sign. dischargepipe network and nozzles and etc... all as per specificationsand as shown on drawings
AItem #VALUE! -
BItem #VALUE! -
CItem #VALUE! -
DItem #VALUE! -
EItem #VALUE! -
To Collection QR 0.00Page 3
Portable fire extinguishers complete as specified, including supports and fixing brackets where necessary.
Note: Design, supply and installation of the Clean Agent Fire Suppression System shall be in accordance strictly with the specifications. The specialist supplier shall obtain all approval to the design prior to work commencing on site.
In first basement floor. Q TEL room; comprising with one nos of capacity 75.27kg cylinder tanks
In first basement floor. LV room; comprising with 02 nos of capacity 374.4kg cylinder tanks
In first basement floor. TX room; comprising with 02 nos of capacity 118kg cylinder tanks
In first basement floor. TX room; comprising with one nos of capacity 281kg cylinder tanks
In first basement floor. MV room; comprising with one nos of capacity 182.6kg cylinder tanks
Sinewave Electromechanical Services W.L.L
document.xlsx Tender Documents
Item Description Qty Unit Rate QR. AMOUNTQR
Builders work in connection with plumbing fire protection anddrainage installations
1 Cleaning and painting all brackets, supports and exposedpipework where necessary Item #VALUE! -
2 Provide marking positions of the holes, mortises, chases and like structure Item #VALUE! -
3 Provide painting for all fire fighting pipes Item #VALUE! -
4 Allow for all other builders work Item #VALUE! -
Sundries.
1 Provide all working drawing for approval by the Engineer Item #VALUE! -
2 provide as-built drawings for approval by the Engineer Item #VALUE! -
3 Provide labels etc for indentification of plant and equipment, valves and the like item #VALUE! -
4 provide operation and maintenace manuals item #VALUE! -
5 provide for complete testing and commissioning Item #VALUE! -
To Collection QR 0.00Page 4
Sinewave Electromechanical Services W.L.L
document.xlsx Tender Documents
Item Description Qty Unit Rate QR. AMOUNTQR
COLLECTION
PAGE-1 0.00
PAGE-2 0.00
PAGE-3 0.00
PAGE-4 0.00
Total Summary of Fire Fighting QR 0.00Page 5
Sinewave Electromechanical Services W.L.L
document.xlsx Tender Documents
Item Description Qty Unit Rate QR.AMOUNT
QR
Fire Alarm Installation
Approved fittings and accessories complete as describedincluding final connection
1 Fire Alarm Control Panel 6-Zone No #VALUE! -
2 Manual Call Point No #VALUE! -
3 Smoke Detector No #VALUE! -
4 Smoke Detector with Sounder No #VALUE! -
5 Horn No #VALUE! -
6 Emergency Light(10.8) No #VALUE! -
8 Emergency Light(108) No #VALUE! -
9 Exit Word + Sign light No #VALUE! -
10 Heat detector No #VALUE! -
11 End of line resistant No #VALUE! -
12 Fire Exit light No #VALUE! -
Fire Alarm Installation
Approved MICC fire alarm cable (2Cx2.5mm2 FP200-fireresistant) enclosed in and including rigid conduitscomplete as described
1 Fire Alarm Control Panel No #VALUE! -
2 Manual Call Point No #VALUE! -
3 Smoke Detector No #VALUE! -
4 Smoke Detector with Sounder No #VALUE! -
5 Horn No #VALUE! -
6 Emergency Light(10.8) No #VALUE! -
8 Emergency Light(108) No #VALUE! -
9 Exit Word + Sign light No #VALUE! -
10 Heat detector No #VALUE! -
11 End of line resistant No #VALUE! -
12 Fire Exit light No #VALUE! -
To Collection QR 0.00Page 1
Sinewave Electromechanical Services W.L.L
document.xlsx Tender Documents
Item Description Qty Unit Rate QR.AMOUNT
QR
Builder's work
1 Allow for all builder's work in connection with ElectricalInstallations Item #VALUE! -
Sundries
1 Provide all working drawing for approval by the Engineer Item #VALUE! -
2 Provide as built drawing for approval by the Engineer item #VALUE! -
3 Provide all plates, discs, labels etc for identification ofplant and equipment and the like Item #VALUE! -
4 Provide operating and maintenance manuals as directedby the Engineer Item #VALUE! -
5 Provide complete testing and commissioning to theinstallations Item #VALUE! -
To Collection QR 0.00Page 2
Sinewave Electromechanical Services W.L.L
document.xlsx Tender Documents
Item Description Qty Unit Rate QR.AMOUNT
QR
COLLECTION
PAGE-1 -
PAGE-2 -
Total Summary of Fire Alarm QR 0.00Page 3
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
(QR) QR DHS
MECHANICAL INSTALLATIONS
Air Conditioning Equipments
Supply and install Roof top type packaged air conditioners, complete, as ealating, including thermostat, vibration isolators concret pads, disconnect switch
1 Ref PAC-1(12.3 TR) No #VALUE! -
2 Ref PAC-2(15.1 TR) No #VALUE! -
3 Ref PAC-3(16.1 TR) No #VALUE! -
4 Ref PAC-4(16.1 TR) No #VALUE! -
5 Ref PAC-5(24 TR) No #VALUE! -
6 Ref PAC-6(16.1 TR) No #VALUE! -
Split Type Air Conditioner
Equipment; including flexible connectors, valves, pressuregauges, temperature sensors, switches, hoisting, fixing inposition, mechanical and electrical connections with localsupply, supports, etc. complete all in accordance withdrawings and specifications.
1 Split AC 1.5 ton No #VALUE! -
2 Split AC 2 ton No #VALUE! -
3 Window AC-01(2.5 ton) No #VALUE! -
4 Window AC-02(1.5 ton) No #VALUE! -
EXHAUST FAN
1 EF-1; Flow rate 0.17m3/s nr #VALUE! -
FRESH AIR HANDLING UNIT
Fresh air handling units consisting of Filter cylinders, testpoint, pressure gauge, automatic pressure independant control valve, strainer with blowdown cock and isolation valves, other associated components andaccessories as specified and generally shown on drawing
1 FAHU-1; total cooling load 27kw nr #VALUE! -
Outdoor unit; including associated components and accessories as specifiedand generally shown on drawing,
2 OU-1; total cooling load 27kW nr #VALUE! -
AIR CONDITIONING AND MECHANICAL ENGINEERING INSTALLATIONS
To Collection QR -
Page 1
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
(QR) QR DHS
FAN COIL UNIT
Fan Coil units consisting of Filter cylinders, test point,pressure gauge, automatic pressure independant control valve,strainer with blow down cock and isolation valves, other associated components and accessories asspecified and generally shown on drawing
F Fan-Coil Unit, Ducted; 6.1kW total cooling capacity 1 nr #REF! #REF!
G Fan-Coil Unit, Ducted; 6.1kW total cooling capacity 1 nr #REF! #REF!
AIR HANDLING UNITS (AHU)
1 Air handling unit, air flow 9523CMH/ 5600CFM, Ref. AHU-BF1. No. #VALUE! -
D Air handling unit, air flow 8843CMH/ 5200CFM, Ref; AHU-BF2. No. #VALUE! -
E Air handling unit;air flow 12245CMH/ 7200CFM, Ref; AHU-BF3. No. #VALUE! -
AIR OUTLETS AND INLETS(Cont'd)
Air outlet and inlets; including flexible ducts, transitionpieces, connection to duct work, fixing in position, etc, all inaccordance with drawings and specifications. (door grillsand door under cut included with respective doors) (cont'd)
1 Bell mouth; 2400mm size No #VALUE! -
2 Ditto; but 1700mm size No #VALUE! -
3 Ditto; but 1550mm size No #VALUE! -
4 Ditto; but 1500mm size No #VALUE! -
5 Ditto; but 1400mm size No #VALUE! -
Air handling units complete with all controls and accessories as specified; described in specifications, space-mounted thermostat, room pressure controller, fixing in position including supports/ brackets, operating/ maintenance manuals, technical data sheets, filter bag, heat pipes, humidifier, electrical connections to local outlets and all associated builder's work as shown on drawing
To Collection QR #REF!
Page 2
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
(QR) QR DHS
CHILLED WATER SYSTEM INSTALLATION
Equipment; including flexible connectors, valves, pressuregauges, temperature sensors, switches, hoisting, fixing inposition, mechanical and electrical connections with localsupply, supports, etc. complete all in accordance withdrawings and specifications
1No #VALUE! -
2 Ditto; but Ref. CH-02 No #VALUE! -
3 Ditto; but Ref. CH-03 No #VALUE! -
4 Ditto; but Ref. CH-04 No #VALUE! -
CHILLED WATER SYSTEM INSTALLATION(Cont'd)
Supply and lay pre-insulated black medium weight steel pipework, chilled water supply and return pipes and fittingsincluding fixing to walls, floors, ceilings, pipe supports,valves, pipe sleeves, strainers all in accordance withspecifications and drawings
1 Chilled water supply pipe; 25mm diameter m #VALUE! -
2 Ditto; 32mm diameter m #VALUE! -
3 Ditto; 50mm diameter m #VALUE! -
4 Ditto; 65mm diameter m #VALUE! -
5 Ditto; 75mm diameter m #VALUE! -
CHILLED WATER SYSTEM INSTALLATION (Cont'd)
Supply and lay pre-insulated black medium weight steel pipework, chilled water supply and return pipes and fittingsincluding fixing to walls, floors, ceilings, pipe supports,valves, pipe sleeves, strainers all in accordance withspecifications and drawings(Cont'd)
1 Chilled water return pipe; 25mm diameter m #VALUE! -
2 Ditto; 32mm diameter m #VALUE! -
3 Ditto; 50mm diameter m #VALUE! -
4 Ditto; 650mm diameter m #VALUE! -
CHILLED WATER SYSTEM INSTALLATION (Cont'd)
Valves and fittings as per specification
1 Gate valve; 25mm diameter No #VALUE! -
2 Ditto; 32mm diameter No #VALUE! -
3 Ditto; 50mm diameter No #VALUE! -
4 Ditto; 65mm diameter No #VALUE! -
Note: The rates for all pipework shall include for all bends, branches, tapers, offsets and stopped ends.
Air conditioning air cooled chiller, screw air cooled type; complete with all accessories according to specification; total cooling capacity 427.0 TR, 646 KW; Ref. CH-01
To Collection QR -
Page 3
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
(QR) QR DHS
Ductwork and fittings; galvanised sheet steel rectangular ducts and fittings; varying thickness; including access panel and doors where necessary, manufactured, fitted and finished as per drawings and Specifications
Ductwork
1 100x100mm m #VALUE! -
2 150x150mm m #VALUE! -
3 200x150mm m #VALUE! -
4 200x200mm m #VALUE! -
5 250x150mm m #VALUE! -
6 250x200mm m #VALUE! -
Fire Damper
1 150x150mm nr #VALUE! -
Volume Dampers
1 150x150mm nr #VALUE! -
2 250x200mm nr #VALUE! -
3 300x250mm nr #VALUE! -
4 300x300mm nr #VALUE! -
Moisture Damper
1 350x300mm nr #VALUE! -
2 500x350mm nr #VALUE! -
Sound Attenuators
1 1000 X 750 X 350 No #VALUE! -
2 1000 X 650 X 350 No #VALUE! -
3 1000 X 700 X 350 No #VALUE! -
4 1000 x 650 x 350 No #VALUE! -
Diffusers#VALUE! -
1 Return diffuser nr #VALUE! -
2 Supply diffuser nr #VALUE! -
Grill
1 100x100mm nr #VALUE! -
Return Louvers
1 1200mm; ref RL1 nr #VALUE! -
2 1500mm; ref RL1 nr #VALUE! -
3 1800mm; ref RL1 nr #VALUE! -
4 2700mm; ref RL1 nr #VALUE! -
5 3000mm; ref RL1 nr #VALUE! -
6 3500mm; ref RL1 nr #VALUE! -
To Collection QR -
Page 4
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
(QR) QR DHS
SUNDRIES AND BUILDER'S WORK
Sundries
AItem #VALUE! -
BItem #VALUE! -
CItem #VALUE! -
D Allow for providing as built record drawings. Item #VALUE! -
E Allow for providing shop and working drawings. Item #VALUE! -
FItem #VALUE! -
GItem #VALUE! -
Builder's Work
H Allow for marking holes, mortices, chases and the like. Item #VALUE! -
J Allow for providing equipment bases. Item #VALUE! -
K Allow for providing steel supporting frame work to equipment. Item #VALUE! -
L Allow for providing concrete block upstands support to equipment.Item #VALUE! -
M Allow for providing sleeves. Item #VALUE! -
N Allow for providing anti-vibration pads. Item #VALUE! -
PItem #VALUE! -
HVAC INSTALLATION (Cont'd)
Allow for painting, plates discs and labels etc for the identification of plant equipment appliances, pipes, valves and the like; all in accordance with specifications.
Allow for providing spare parts and tools as required by specifications.
Allow for providing operating manuals, catalogues, drawings and samples.
Allow for inspecting, testing and commissioning the installations including preparation of testing and commissioning report and Kahramaa approval.
Allow for providing test certificate, insurance bond guarantee as required by Kahramaa.
Allow for providing insulation and waterproofing for holes in slabs and walls.
To Collection QR -
Page 5
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
(QR) QR DHS
COLLECTION
PAGE-1 -
PAGE-2 #REF!
Page-3 -
PAGE-4 -
PAGE-5 -
To Collection QR #REF!
Page 6
SUMMARY SHEET
EST-ACE BREAK DOWN
BILL NO DESCRIPTION NO OF MATERIAL
BUILDINGS QAR
A
1 PLUMBING
2 ELECTRICAL
3 HVAC
4 FIRE FIGHTING
5 FIRE ALARM
TOTAL -
SALES PRICE RECOVERY CLIENT SALES
LABOUR LMP 25.00%
QAR QAR QAR QAR
- - 0.00
- - 0.00
- - 0.00
- - 0.00
- - 0.00
- - - -
CLIENT SALES