Standard Mandatori Yang Telah Dikemaskini_190615

Malaysian Standards (MS) refered in ACT

Title of MS/Current Malaysian Standards (MS) ISC Agency Remark Name of origin at

April 2009 MS 1230:2010 1 1 A FAMA MS 1230:2010

April 2009 MS 894:2005 Fresh Chillies-Specification (1st revision) 2 2 A FAMA Replaced by MS 894:2MS 894:1984

April 2009 MS 1124:1996 3 3 A FAMA MS 1124:1996

April 2009 MS 1306:2005 4 4 A FAMA MS 1306:2005

April 2009 MS 1252:2009 Fresh French Beans-Specification (1st revision) 5 5 A FAMA MS 1252:2009

April 2009 MS 951:2003 Spesifikasi bagi Kacang Panjang (2nd revision) 6 6 A FAMA MS 951:2003

April 2009 MS 1324:1993 Specification for Fresh Kale (kailan) 7 7 A FAMA MS 1324:1993

April 2009 MS 892:2004 Spesifikasi bagi Kobis Bulat (2nd revision) 8 8 A FAMA MS 892:2004

April 2009 MS 1393:1996 Specification for Fresh Chinese Cabbage (Head Type) 9 9 A FAMA MS 1393:1996

April 2009 MS 1146:1989 Specification for Fresh Bitter Gourd 10 10 A FAMA MS 1146:1989

April 2009 MS 1361:1994 Specification for Fresh Head Lettuce 11 11 A FAMA MS 1361:1994

Current Malaysian Standards (MS)

Date of Enforcement

MS NUMBER / Current Malaysian Standards (MS)

No of Mandat

ory Standar

ds

MS No. Malaysian Standards (MS) refered in ACT

Title of MS/ Malaysian Standards (MS) refered in ACT

No. Malaysian Standard

s (MS) refered in

ACT

Fresh Lady’s Finger (Okra)-Specification (1st revision) MS 1230:1991

Specification for Fresh Okra (Lady’s finger)

MS 894:1984

Specification for Fresh Chillies

Specification for Fresh Sweet Pepper (Bell Pepper) (1st revision)

MS 1124:1996

Specification for Fresh Sweet Pepper (Bell Fresh Ginger-Specification (1st revision) MS

1306:2005Fresh Ginger-Specification (1st revision)

MS 1252:1992

Specification for Fresh French Beans

MS 951:2003

Spesifikasi bagi Kacang Panjang (2nd revision)MS

1324:1993Specification for Fresh Kale (kailan)

MS 892:2004

Spesifikasi bagi Kobis Bulat (2nd revision)

MS 1393:1996

Specification for Fresh Chinese Cabbage (Head MS

1146:1989 Specification for Fresh Bitter Gourd

MS 1361:1994

Specification for Fresh Head Lettuce




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT

April 2009 MS 1323:2008 Fresh Mustards-Specification (1st revision) 12 12 A FAMA MS 1323:2008

April 2009 MS 1362:1994 Specification for Fresh Spinach 13 13 A FAMA MS 1362:1994

April 2009 MS 956:2003 Spesifikasi bagi Timun (2nd revision) 14 14 A FAMA MS 956:2003

April 2009 MS 893:2010 15 15 A FAMA MS 893:2010

April 2009 MS 1127:2002 Specification for Fresh Carambola (2nd revision) 16 16 A FAMA MS 1127:2002

April 2009 MS 1040:1986 Specification for Fresh Papaya 17 17 A FAMA MS 1040:1986

April 2009 MS 1145:2003 Specification for Fresh Eksotika Papaya (1st revision) 18 18 A FAMA MS 1145:2003

April 2009 MS 1149:1989 Specification for Fresh Guava 19 19 A FAMA MS 1149:1989

April 2009 MS 232:1974 Specification for Malaysian Mandarins for Fresh-Fruit Consumption 20 20 A FAMA MS 232:1974

April 2009 MS 885:1984 Specification for the Grading of Mangoes for Fresh-Fruit Consumption 21 21 A FAMA MS 885:1984

April 2009 MS 1128:1989 Specification for Quick Frozen Mangosteen 22 22 A FAMA MS 1128:1989

MS 1323:1993

Specification for Fresh Mustards

MS 1362:1994

Specification for Fresh Spinach

MS 956:2003

Spesifikasi bagi Timun (2nd revision)

Spesifikasi bagi Tomato (2nd revision)

FRESH TOMATOES - SPECIFICATION (THIRD REVISION)

MS 893:2003

Spesifikasi bagi Tomato (2nd revision)

MS 1127:2002

Specification for Fresh Carambola (2nd revision)MS

1040:1986 Specification for Fresh Papaya

MS 1145:2003

Specification for Fresh Eksotika Papaya (1st MS

1149:1989Specification for Fresh Guava

MS 232:1974

Specification for Malaysian Mandarins for Fresh-Fruit MS

885:1984Specification for the Grading of Mangoes for Fresh-Fruit MS

1128:1989Specification for Quick Frozen Mangosteen




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT

April 2009 MS 1055:1986 Specification for Fresh Jackfruit 23 23 A FAMA MS 1055:1986

April 2009 MS 459:1976 Specification for Fresh Bananas 24 24 A FAMA MS 459:1976

April 2009 MS 1075:1987 Export Specification for Fresh ‘Mas’ Bananas 25 25 A FAMA MS 1075:1987

April 2009 Fresh Watermelon - Specification (1st revision) 26 26 A FAMA MS 1028:2005

April 2009 MS 1325:1993 Specification for Fresh Muskmelon (Tembikai Wangi) 27 27 A FAMA MS 1325:1993

April 2009 MS 1354:1994 Specification for Fresh Cut Chrysanthemum (Multi-Floral) 28 28 A FAMA MS 1354:1994

April 2009 MS 1280:1992 Specification for Fresh Orchid Cut Flowers (Spray Type) 29 29 A FAMA MS 1280:1992

April 2009 MS 1233:1991 Specification for Fresh Cut Roses (Unifloral Type) 30 30 A FAMA MS 1233:1991

April 2009 MS 1355:1994 Specification for Fresh Cut Roses (Multi-Floral) 31 31 A FAMA MS 1355:1994

April 2009 MS 1281:1992 Specification for Fresh Cut Carnations (Unifloral) 32 32 A FAMA MS 1281:1992

April 2009 MS 1353:1994 Specification for Fresh Cut Carnations (Multi-Floral) 33 33 A FAMA MS 1353:1994

MS 1055:1986

Specification for Fresh Jackfruit

MS 459:1976

Specification for Fresh Bananas

MS 1075:1987

Export Specification for Fresh ‘Mas’ BananasMS 1028:2005

(CONFIRMED:2012)MS 1028:2005

Fresh Watermelon - Specification (1st revision)MS

1325:1993Specification for Fresh Muskmelon (Tembikai MS

1354:1994Specification for Fresh Cut Chrysanthemum (Multi-MS

1280:1992 Specification for Fresh Orchid Cut Flowers (Spray MS

1233:1991Specification for Fresh Cut Roses (Unifloral Type)MS

1355:1994Specification for Fresh Cut Roses (Multi-Floral)MS

1281:1992Specification for Fresh Cut Carnations (Unifloral)

MS 1353:1994

Specification for Fresh Cut Carnations (Multi-Floral)




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT

1 Januari 2011 MS 1529:2001 34 MS 1529 34 A KKM MS 1529:2001

MS 157:2005 Oil Palm Seeds for Commercial Planting - Specification 35 35 A MPOB MS 157:2005

FRESH SEKAKI PAPAYA - SPECIFICATION 35 A FAMA

MS 1859:2005 FRESH CHOKANAN MANGO - SPECIFICATION 35 A FAMA

MS 1994:2007 35 A FAMA

MS 1995:2007 FRESH RAMBUTAN – SPECIFICATION 35 A FAMA

MS 2201:2008 FRESH PITAHAYA - SPECIFICATION 35 A FAMA

MS 2202:2008 FRESH PUMMELO - SPECIFICATION 35 A FAMA

MS 2403:2011 35 A FAMA

MS 2423:2011 35 A FAMA

MS 2431:2011 FRESH DURIAN - SPECIFICATION 35 A FAMA

The Production, Processing, Labelling and Marketing of Plant-Based Organically Produced Foods

The Production, Processing, Labelling and Marketing of Plant-

MS 157:2005

Oil Palm Seeds for Commercial Planting - SpecificatiMS 1820:2005

(CONFIRMED:2012)

FRESH ‘CAVENDISH’ BANANA — SPECIFICATION

MS 2403:2011 FRESH PUMPKIN (CUCURBITA MOSCHATA) - SPECIFICATION

FRESH BRINJAL - SPECIFICATION TERUNG SEGAR - SPESIFIKASI




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT

1 Julai 2013 MS 293:2005 COCOA BEANS – SPECIFICATION FOR GRADING (FOURTH REVISION) 35 A LKM

MS 230:2007 COCOA BEANS – SAMPLING METHOD FOR GRADING (FIRST REVISION) 35 A LKM

1 Ogos 2010 MS ISO 8124-1:2001 Safety of Toys - Part 1: Safety Aspects Related to Mechanical and Physical Properties 36 36 B KPDNKK

1 Ogos 2010 MS ISO 8124-1:2011 Safety of Toys - Part 1: Safety Aspects Related to Mechanical and Physical Properties 37 36 B KPDNKK

1 Ogos 2010 MS ISO 8124-2:2008 38 37 B KPDNKK

1 Ogos 2010 MS ISO 8124-3:2002 Safety of Toys - Part 3: Migration of Certain Elements 39 38 B KPDNKK

1 Ogos 2010 MS 1774-4:1998 Safety of Toys - Part 4: Experimental Sets for Chemistry and Related Activities 41 39 B KPDNKK

MS ISO 8124: Part 1: 2001

Safety of Toys - Part 1: Safety Aspects Related to Mechanical and Physical Properties

MS ISO 8124: Part 1: 2001

MS ISO 8124: Part 1: 2001

Safety of Toys - Part 1: Safety Aspects Related to Mechanical and Physical Properties

MS ISO 8124: Part 1: 2011

SAFETY OF TOYS - PART 1: SAFETY ASPECTS RELATED TO MECHANICAL AND PHYSICAL PROPERTIES (FIRST REVISION) (ISO 8124-1:2009, IDT)

MS ISO 8124: Part 2:1999

Safety of Toys - Part 2: Flammability

MS ISO 8124: Part 2:2008

MS ISO 8124: Part 3: 2002

Safety of Toys - Part 3: Migration of Certain Elements

MS ISO 8124: Part 3: 2002

MS 1774: Part 4: 1998

Safety of Toys - Part 4: Experimental Sets for Chemistry and Related Activities

MS 1774: Part 4: 1998




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT

1 Ogos 2010 MS 1774-5:1998 Safety of Toys - Part 5: Chemical Toys (Sets) Other Than Experimental Sets 42 40 B KPDNKK

1 Ogos 2010 MS 1774-6:1998 Safety of Toys - Part 6: Graphical Symbol for Age Warning Labelling 43 41 B KPDNKK

MS 847 : 1983 SPECIFICATION FOR SILICA SAND FOR THE MANUFACTURE OF SODIUM SILICATE 46 B SPAN

27-Sep-12 MS ISO 6486-1:2003 46 B KKM

MS 1848:2005 ALUMINIUM AND ALUMINIUM ALLOYS - FOILS 54 P CIDB

MS 2040:2007 ALUMINIUM AND ALUMINIUM ALLOYS - SHEETS AND COILED SHEETS - SPECIFICATION 55 P CIDB

MS 544-1:2001 Code of Practice for Structural Use of Timber: Part 1: General (1st revision) 68 MSCP 42 D JKT, KPKT

MS 544-1:2001 Code of Practice for Structural Use of Timber: Part 1: General (1st revision) D BOMBA

MS 544-2:2001 69 MSCP 42 D JKT, KPKT

MS 544-3:2001 70 MSCP 42 D JKT, KPKT

MS 544-4:Section 1:2001 71 MSCP 42 D JKT, KPKT

MS 1774: Part 5: 1998

Safety of Toys - Part 5: Chemical Toys (Sets) Other Than Experimental Sets

MS 1774: Part 5: 1998

MS 1774: Part 6: 1998

Safety of Toys - Part 6: Graphical Symbol for Age Warning Labelling

MS 1774: Part 6: 1998

CERAMIC WARE, GLASS CERAMIC WARE AND GLASS DINNERWARE IN CONTACT WITH FOOD - RELEASE OF LEAD AND CADMIUM – PART 1: TEST METHOD (ISO 6486-1:1999, MOD )

The Structural -Use of Timbers

MS CP for Structural timber (replaced by MS 544 series)MS 544: Part1: 2001

*Refer no. 68

Code of Practice for Structural Use of Timber: Part 2: Permissible Stress Design of Solid Timber (1st revision)


MS CP for Structural timber (replaced by MS 544 series)MS 544: Part 2: 2001

Code of Practice for Structural Use of Timber: Part 3: Permissible Stress Design of Glued Laminated Timber



Code of Practice for Structural Use of Timber: Part 4: Timber Panel Products: Section 1: Structural Plywood


MS CP for Structural timber (replaced by MS 544 series)MS 544: Part 4: Section 1: 2001




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT




MS 544-5:2001 Code of Practice for Structural Use of Timber: Part 5: Timber Joints 75 MSCP 42 D JKT, KPKT

MS 544-6:2001 76 MSCP 42 D JKT, KPKT

MS 544-6:2001 D BOMBA

MS 544-7:2001 Code of Practice for Structural Use of Timber: Part 7: Testing (1st revision) 77 MSCP 42 D JKT, KPKT

MS 544-7:2001 Code of Practice for Structural Use of Timber: Part 7: Testing (1st revision) D BOMBA

MS 544-9: Section 1: 2001 78 MSCP 42 D JKT, KPKT

MS 544-9: Section 1: 2001 D BOMBA

MS 544-10: 2003 79 MSCP 42 D JKT, KPKT

MS 544-11:Section 1: 2001 80 MSCP 42 D JKT, KPKT

Code of Practice for Structural Use of Timber: Part 4: Timber Panel Products: Section 2: Marine Plywood



Code of Practice for Structural Use of Timber: Part 4: Timber Panel Products: Section 3: Cement Bonded Particle Board (CBP)



Code of Practice for Structural Use of Timber: Part 4: Timber Panel Products: Section 4: Oriented Strand Board (OSB)





CODE OF PRACTICE FOR STRUCTURAL USE OF TIMBER : PART 6 : WORKMANSHIP, INSPECTION AND MAINTENANCE (FIRST REVISION)



Code of Practice for Structural Use of Timber: Part 6: Workmanship, Inspection and Maintenance (1st revision)

*Refer no. 76



*Refer no. 77

Code of Practice for Structural Use of Timber: Part 9: Fire Resistance of Timber Structures: Section 1: Method of Calculating Fire Resistance of Timber Members




*Refer no. 78

Code of Practice for Structural Use of Timber: Part 10: Preservative Treatment of Structural Timber



Code of Practice for Structural Use of Timber: Part 11: Recommended Span Tables and Their Calculations: Section 1: Domestic Floor Joists






Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT



MS 544-12: 2006 83 MSCP 42 D JKT, KPKT

MS 1184:2002 Code of practice for access of disabled people to public buildings 85 MS 1184 44 D MS 1184:2002

MS 1296:2010 86 D CIDB

MS 1331:2003 Code of Practice for Access of Disabled Persons Outside Building 87 MS 1331 45 D MS 1331:2003

February 2004 MS 888: 2011 88 46 D CIDB MS 888: 2011

MS 794:2010 MASONRY CEMENT - SPECIFICATION (FIRST REVISION) 89 D CIDB

Code of Practice for Structural Use of Timber: Part 11: Recommended Span Tables and Their Calculations: Section 2: Ceiling Joists



Code of Practice for Structural Use of Timber: Part 11: Recommended Span Tables and Their Calculations: Section 3: Ceiling Binders



Code of Practice for Structural Use of Timber: Part 12: Laminated Veneer Lumber for Structural Application



Code of practice for access of disabled people to public buildings

Jbtn. Perancangan Bandar & Desa Semenanjung

Malaysia

FIBRE-CEMENT FLAT SHEETS - PRODUCT SPECIFICATION AND TEST METHODS (FIRST REVISION)

Code of Practice for Access of Disabled Persons Outside Building


Malaysia

WHITE PORTLAND CEMENT - COMPOSITIONS, SPECIFICATIONS AND CONFORMITY CRITERIA (SECOND REVISION)

MS 888: 1991

WHITE PORTLAND CEMENT - COMPOSITIONS, SPECIFICATIONS AND CONFORMITY CRITERIA




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT

February 2004 90 48 D CIDB


MS 1064-10:2001 (CONFIRMED 2009)

GUIDE TO MODULAR COORDINATION IN BUILDINGS : PART 10 : COORDINATING SIZES AND PREFERRED SIZES FOR REINFORCED CONCRETE COMPONENTS (FIRST REVISION)

MS 1064 : PART 10 : 2001 (CONFIRMED 2009)



MS 1064-3:2003 (CONFIRMED 2009)

GUIDE TO MODULAR COORDINATION IN BUILDINGS : PART 3 : COORDINATING SIZES AND PREFERRED SIZES FOR STAIRS AND STAIR OPENINGS (FIRST REVISION)







Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT



MS 1064-4:2001 (CONFIRMED 2009)

GUIDE TO MODULAR COORDINATION IN BUILDINGS : PART 4 : COORDINATING SIZES AND PREFERRED SIZES FOR DOORSETS (FIRST REVISION)




MS 1064-5:2001 (CONFIRMED 2009)

GUIDE TO MODULAR COORDINATION IN BUILDINGS : PART 5 : COORDINATING SIZES AND PREFERRED SIZES FOR WINDOWSETS (FIRST REVISION)







Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT



MS 1064-6:2001 (CONFIRMED 2009)

GUIDE TO MODULAR COORDINATION IN BUILDINGS : PART 6 : COORDINATING SIZES AND PREFERRED SIZES FOR RIGID FLAT SHEETS (FIRST REVISION)




MS 1064-7:2001 (CONFIRMED 2009)

GUIDE TO MODULAR COORDINATION IN BUILDINGS: PART 7: COORDINATING SIZES AND PREFERRED SIZES FOR TILES







Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT



MS 1064-8:2001 (CONFIRMED 2009)

GUIDE TO MODULAR COORDINATION IN BUILDINGS: PART 8 : COORDINATING SIZES AND PREFERRED SIZES FOR MASONRY BRICKS AND BLOCKS




MS 1064-9:2001 (CONFIRMED 2009)

GUIDE TO MODULAR COORDINATION IN BUILDINGS : PART 9: COORDINATING SIZES AND PREFERRED SIZES FOR CABINETS







Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT

February 2004 MS 1017-1:1986 98 56 D CIDB


SPECIFICATION FOR ALUMINIUM FRAMED SLIDING GLASS DOORS : PART 1 : SINGLE GLAZED DOORS

MS 1017 : PART 1 : 1986


MS 1017 : PART 1 : 1986

MS 1020:2010 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION (FIRST REVISION)

MS 1020:2010

THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION (FIRST REVISION)

MS 1020:2010




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT

February 2004 57 D ST

MS 1135:2009 FLOAT AND POLISHED PLATE GLASSES - SPECIFICATION (FIRST REVISION) 100 D CIDB



*refer to 99

MS 1020:2010

THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION (FIRST REVISION)

MS 1020:2010

MS 1135:2009

FLOAT AND POLISHED PLATE GLASSES - SPECIFICATION (FIRST REVISION)

PRECAST CONCRETE PILES : PART 1 : GENERAL REQUIREMENTS AND SPECIFICATIONS (FIRST REVISION)

MS 1314 : PART 1 : 2004


MS 1314 : PART 1 : 2004




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT



PRECAST CONCRETE PILES : PART 2 : METHOD FOR DETERMINATION OF BENDING STRENGTH OF PRECAST CONCRETE PILES (BEND TEST) (FIRST REVISION)

MS 1314 : PART 2 : 2004


MS 1314 : PART 2 : 2004

PRECAST CONCRETE PILES : PART 3 : PRECAST REINFORCED CONCRETE SQUARE PILES (RC PILES) CLASS M, CLASS J AND CLASS S

MS 1314 : PART 3 : 2004


MS 1314 : PART 3 : 2004




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT

February 2004 MS 1314 -4:2004 104 61 D CIDB


PRECAST CONCRETE PILES : PART 4 : PRECAST PRETENSIONED SPUN CONCRETE PILES (SPUN PILES) CLASS A, CLASS B AND CLASS C

MS 1314 : PART 4 : 2004


MS 1314 : PART 4 : 2004

PRECAST CONCRETE PILES : PART 5 : PRECAST PRESTRESSED CONCRETE SQUARE PILES - CLASS PC-X, CLASS PC-Y, SMALL PILES CLASS PCS-1, AND CLASS PCS-2

MS 1314 : PART 5 : 2004


MS 1314 : PART 5 : 2004




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT


MS 795-1:2011 WC FLUSHING CISTERNS - PART 1 : SPECIFICATION (SECOND REVISION) 107 64 D CIDB MS 795-1:2011

MS 795-2:2011 WC FLUSHING CICTERNS - PART 2:INLET VALVES (SECOND REVISION) 108 65 D CIDB MS 795-2:2011

PRECAST CONCRETE PILES : PART 6: SMALL REINFORCED CONCRETE SQUARE PILES - SMALL PILES CLASS RCS-1 AND CLASS RCS-2

MS 1314 : PART 6 : 2004


MS 1314 : PART 6 : 2004

MS 795-1:2011

WC FLUSHING CISTERNS - PART 1 : SPECIFICATION (SECOND REVISION)

MS 795-2:2011

WC FLUSHING CICTERNS - PART 2:INLET VALVES (SECOND REVISION)




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT

MS 795-3:2011 WC FLUSHING CICTERNS - PART 3: FLUSHING DEVICE (SECOND REVISION) 109 66 D CIDB MS 795-3:2011

SPECIFICATION FOR SAWN-TIMBER FOUNDATION PILES 110 67 D CIDB

MS 1061-2:2008 112 68 D CIDB

MS 1037:1986 Sulphate-resisting Portland cement 113 69 D CIDB MS 1037:1986

MS 795-3:2011

WC FLUSHING CICTERNS - PART 3: FLUSHING DEVICE (SECOND REVISION)

MS 822:1983 (CONFIRMED:2004)

MS 822 : 1983 (CONFIRMED:2004)

SPECIFICATION FOR SAWN-TIMBER FOUNDATION PILES

MS 822 : 1983 (CONFIRMED:2004)

VITRIFIED CLAY PIPES FITTINGS AND PIPE JOINTS FOR DRAINS AND SEWERS: PART 2: QUALITY CONTROL AND SAMPLING

MS 1061 : PART 2 : 1999


MS 1061 : PART 2 : 1999

MS 1037:1986

Sulphate-resisting Portland cement




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT

MS EN 413-1:2012 114 D BOMBA

MS EN 413-2:2012 115 D BOMBA

116 70 D CIDB MS 1227, MS 1389,

117 71 D CIDB MS 1227, MS 1389,

72 D CIDB MS 1227, MS 1389,

MASONRY CEMENT - PART 1: COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA (SECOND REVISION)

MS EN 413-1:2012

MASONRY CEMENT - PART 1: COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA (SECOND REVISION)

MASONRY CEMENT - PART 2: TEST METHODS (SECOND REVISION)----

MS EN 413-2:2012

MASONRY CEMENT - PART 2: TEST METHODS (SECOND REVISION)----

MS EN 197-1:2007

MS EN 197-2:2007

CEMENT- PART 1: COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA FOR COMMON CEMENTS

CEMENT - PART 2: CONFORMITY EVALUATION

MS 1227:2003

Portland Prolverized Fuel Ash Cement

MS EN 197-1:2007,

MS EN 197-2:2007

MS EN 197-1:2007,

MS EN 197-2:2007



MS 1389:1995

Portland Blast Furnace Cement

MS EN 197-1:2007,

MS EN 197-2:2007

MS EN 197-1:2007,

MS EN 197-2:2007



MS 1520:2001

Pozzolanic Prolverised Fuel Ash Cement

MS EN 197-1:2007,

MS EN 197-2:2007




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT

73 D CIDB MS 1227, MS 1389,

74 D CIDB Renumbered with MMS EN 197-1:2007

MS ISO 13006:2003 Ceramic Tiles - Definitions, Classification, Characteristic and Marking 75 D CIDB

MS 147:2001 Specification for Quality of Vitreous China Sanitary Appliances (1st revision) 76 D CIDB MS 147:2001

MS 1522:2011 Specification for Vitreous China Water Closet Pans (1st revision) 118 77 D CIDB MS 1522:2011

MS EN 197-1:2007,

MS EN 197-2:2007



MS 1388:1995

High Slag Blast Furnace Cement

MS EN 197-1:2007,

MS EN 197-2:2007

MS EN 197-1:2007

MS EN 197-2:2007



*Refer no. 116

MS 522: Part 1: 2007

Portland cement (ordinary and rapid hardening): Part 1 Specification (2nd revision)

*Refer no.118

MS ISO 13006:2003

Ceramic Tiles - Definitions, Classification, Characteristic and Marking

MS ISO 13006:2003

*Refer no.67

MS 147:2001

Specification for Quality of Vitreous China Sanitary Appliances (1st revision)

MS 1522:2011

Specification for Vitreous China Water Closet Pans (1st revision)




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT

MS 2402:2011 120 D BOMBA

MS 2279:2010 122 D BOMBA

PRECAST CONCRETE MASONRY UNITS - GUIDE FOR SPECIFYING PRECAST CONCRETE MASONRY UNITS

MS 2402:2011

PRECAST CONCRETE MASONRY UNITS - GUIDE FOR SPECIFYING PRECAST CONCRETE MASONRY UNITS

PERFORMANCE STANDARDS IN BUILDING - DEFINITION AND CALCULATION OF AREA AND SPACE INDICATORS

MS 2279:2010

PERFORMANCE STANDARDS IN BUILDING - DEFINITION AND CALCULATION OF AREA AND SPACE INDICATORS




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT

MS 2282-3:2010 123 D BOMBA

124 D BOMBA

MASONRY UNITS - SPECIFICATION - PART 3: AGGREGATE CONCRETE MASONRY UNITS (DENSE AND LIGHT-WEIGHT AGGREGATES) (SECOND REVISION)

MS 2282-3:2010 MASONRY

UNITS - SPECIFICATION - PART 3: AGGREGATE CONCRETE MASONRY UNITS (DENSE AND LIGHT-WEIGHT AGGREGATES) (SECOND REVISION)

MS 2282-4:2011 MASONRY UNITS - SPECIFICATION - PART 4: AUTOCLAVED AERATED CONCRETE MASONRY UNITS

MS 2282-4:2011

MASONRY UNITS - SPECIFICATION - PART 4: AUTOCLAVED AERATED CONCRETE MASONRY UNITS




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT

125 D BOMBA

MS 2397:2011 SOLAR REFLECTIVE GLASS - SPECIFICATION 126 D MITI

MS 2095:2008 RADIANT BARRIER BUILDING MATERIALS 126 D MITI

MS 1498:2011 SAFETY GLASS IN BUILDING - SAFETY PERFORMANCE SPECIFICATION (FIRST REVISION) 126 D MITI

MS 2339:2010 THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF THICKNESSD

MS 2339:2010

THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF THICKNESSD

MS 2397:2011

SOLAR REFLECTIVE GLASS - SPECIFICATION

MS 2095:2008

RADIANT BARRIER BUILDING MATERIALS

MS 1498:2011

SAFETY GLASS IN BUILDING - SAFETY PERFORMANCE SPECIFICATION (FIRST REVISION)




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT

1-Jun-15 MS 2441-2:2014 126 D SPAN

MS 275-1:1975 126 E CIDB

MS 275-2:1975 127 E CIDB

MS 1141:2006 128 E ST

MS 1578:2003 129 78 E ST MS 1578:2003

130 E BOMBA

MS 589-1:2011 131 79 E ST

MS 1577:2003 Specification for 15A plugs and socket-outlets for domestic and similar purposes 132 80 E ST MS 1577:2003

ON SITE SEWAGE TREATMENT UNITS - PART 2: PACKAGED PREFABRICATED SMALL SEWAGE TREATMENT SYSTEM SPECIFICATIONS

MS 2441-2:2014

ON SITE SEWAGE TREATMENT UNITS - PART 2: PACKAGED PREFABRICATED SMALL SEWAGE TREATMENT SYSTEM SPECIFICATIONS

SPECIFICATION FOR STEEL CONDUITS AND FITTINGS WITH METRIC THREADS OF ISO FORM FOR ELECTRICAL INSTALLATIONS : PART 1 : STEEL CONDUITS, BENDS & COUPLERS (INTERNATIONALLY ACCEPTABLE SIZES)

SPECIFICATION FOR STEEL CONDUITS AND FITTINGS WITH METRIC THREADS OF ISO FORM FOR ELECTRICAL INSTALLATIONS : PART 2 : FITTINGS AND COMPONENTS (NON-INTERNATIONALLY ACCEPTABLE SIZES

PORTABLE CABLE REELS FOR DOMESTIC AND SIMILAR PURPOSES - SPECIFICATION (FIRST REVISION)

Specification for flat non-rewirable two-pole plugs, 2.5A. 250 V with cord for connection of Class II – Equipment for household and similar purposes

MS 1578:2003

Specification for flat non-rewirable two-pole plugs, MS 1777: PART 1:2004 CABLE TRUNKING AND CABLE DUCTING SYSTEMS FOR ELECTRICAL INSTALLATIONS – PART 1:

GENERAL REQUIREMENTSMS 1777: PART 1:2004

CABLE TRUNKING AND CABLE

13A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 1: SPECIFICATION FOR REWIRABLE AND NON-REWIRABLE 13A FUSED PLUGS (THIRD REVISION)

MS 589: Part 1: 1997

Specification for 13A plugs, socket-outlets, adaptors

MS 589: Part 1: 2011

MS 1577:2003

Specification for 15A plugs and socket-outlets for domestic




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT

MS 589-3:2012 133 81 E ST

MS 1144:1998 General requirements for electric accessories (1st revision) 134 82 E ST MS 1144:1998

MS IEC 60331-11 : 2001 135 E BOMBA

MS IEC 60331-21 : 2001 136 E BOMBA

MS IEC 60331-25 : 2001 137 E BOMBA

MS IEC 60331-23 : 2001 138 E BOMBA

MS IEC 60332-1 : 2001 139 E BOMBA

140 E BOMBA

MS IEC 60998-1:2005 141 83 E ST

MS IEC 60998-2-1:2005 142 84 E ST

13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 3: SPECIFICATION FOR ADAPTORS (THIRD REVISION)

MS 589-3:2012

13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND

MS 589: Part 3: 1998

MS 1144:1998

General requirements for electric accessories (1st TESTS FOR ELECTRIC CABLES UNDER FIRE CONDITIONS - CIRCUIT INTEGRITY - PART 11:

APPARATUS - FIRE ALONE AT A FLAME TEMPERATURE OF AT LEAST 750 &DEG;CMS IEC 60331-11 : 2001

TESTS FOR ELECTRIC CABLES UNDER FIRE CONDITIOTESTS FOR ELECTRIC CABLES UNDER FIRE CONDITIONS - CIRCUIT INTEGRITY - PART 21:

PROCEDURES AND REQUIREMENTS - CABLES OF RATED VOLTAGE UP TO AND INCLUDING 0.6/0.1KV

MS IEC 60331-21 : 2001

TESTS FOR ELECTRIC CABLES UNDER FIRE CONDITIONS -

TESTS FOR ELECTRIC CABLES UNDER FIRE CONDITIONS - CIRCUIT INTEGRITY - PART 25 : PROCEDURES AND REQUIREMENTS - OPTICAL FIBRE CABLES

MS IEC 60331-25 : 2001

TESTS FOR ELECTRIC CABLES UNDER FIRE CONDITIONS -

TESTS ON ELECTRIC CABLES UNDER FIRE CONDITIONS - CIRCUIT INTEGRITY - PART 23 : PROCEDURES AND REQUIREMENTS - ELECTRIC DATA CABLES----

MS IEC 60331-23 : 2001

TESTS ON ELECTRIC CABLES UNDER FIRE CONDITIONS -

TESTS ON ELECTRIC CABLES UNDER FIRE CONDITIONS PART 1: TEST ON A SINGLE VERTICAL INSULATED WIRE OR CABLE

MS IEC 60332-1 : 2001

TESTS ON ELECTRIC CABLES UNDER

MS IEC 60332-2 : 2001 TESTS ON ELECTRIC CABLES UNDER FIRE CONDITIONS - PART 2 : TEST ON A SINGLE SMALL VERTICAL INSULATED COPPER WIRE OR CABLES

MS IEC 60332-2 : 2001

TESTS ON ELECTRIC CABLES UNDER FIRE CONDITIOConnecting devices for low-voltage circuits for household and similar purposes: Part 1:

General requirementsMS IEC 60998: Part 1: 2005

Connecting devices for low-voltage circuits for household

MS IEC 60998: Part 1: 2005

Connecting devices for low-voltage circuits for household and similar purposes: Part 2-1: Particular requirements for connecting devices as separate entities with screw - type clamping

MS IEC 60998: Part 2-1: 2005

Connecting devices for low-voltage circuits for household and similar

MS IEC 60998: Part 2-1: 2005




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT

MS IEC 60998-2-2:2005 143 E ST

MS IEC 60998-2-3:2005 144 85 E ST

MS IEC 60998-2-4:2005 145 86 E ST

MS IEC 60998-2-5:2005 146 87 E ST

MS IEC 60669-1:2012 147 88 E ST

MS IEC 60669-2-1:2012 148 89 E ST

MS IEC 60669-2-2:2004 149 90 E ST

MS IEC 60669-2-3:2012 150 91 E ST

MS 589-2:2011 151 92 E ST

CONNECTING DEVICES FOR LOW-VOLTAGE CIRCUITS FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 2-2: PARTICULAR REQUIREMENTS FOR CONNECTING DEVICES AS SEPARATE ENTITIES WITH SCREWLESS-TYPE CLAMPING UNITS (IEC 60998-2-2:2002,IDT)

Connecting devices for low-voltage circuits for household and similar purposes: Part 2-3: Particular requirements for connecting devices as separate entities with insulation-piercing clamping units

MS IEC 60998: Part 2-3: 2005


MS IEC 60998: Part 2-3: 2005

Connecting devices for low-voltage circuits for household and similar purposes: Part 2-4: Particular requirements for twist-on connecting devices

MS IEC 60998: Part 2-4: 2005

Connecting devices for low-voltage circuits for household

MS IEC 60998: Part 2-4: 2005

Connecting devices for low-voltage circuits for household and similar purposes: Part 2-5: Particular requirements for connecting boxes (junction and/or tapping) for terminals or connecting devices

MS IEC 60998: Part 2-5: 2005


MS IEC 60998: Part 2-5: 2005

SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS (FIRST REVISION) (IEC 60669-1:2007, IDT)

MS IEC 60669-1:2012

SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED

MS IEC 60669: Part 1: 2004

SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 2-1: PARTICULAR REQUIREMENTS - ELECTRONIC SWITCHES (FIRST REVISION) (IEC 60669-2-1:2009, IDT)

MS IEC 60669-2-1:2012

SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICA

MS IEC 60669: Part 2-1: 2004

Switches for household and similar fixed electrical installations: Part 2-2: Particular requirements – Remote control switches (RCS)

MS IEC 60669: Part 2-2: 2004

Switches for household and similar fixed electrical

MS IEC 60669: Part 2-2: 2004

SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS- PART 2-3: PARTICULAR REQUIREMENTS - TIME DELAY SWITCHES (TDS) (FIRST REVISION) (IEC 60669-2-3:2006, IDT)

MS IEC 60669-2-3:2012

SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICA

MS IEC 60669: Part 2-3: 2004

Specification for 13A plugs, socket-outlets, adaptors and connection units: Part 2: Specification for 13A switched and unswitched socket-outlet (1st revision)

MS 589: Part 2: 2011


MS 589: Part 2: 2011




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT

MS 1579:2003 152 93 E ST MS 1579: 2003

MS IEC 61558-1:2005 153 94 E ST

MS IEC 61558-2-5:2006 154 95 E ST

MS IEC 61558-2-6:2006 155 96 E ST

MS IEC 61558-2-7:2007 156 E ST

MS IEC 61558-2-17:2007 157 E ST

MS 770:1982 Specification for ceiling roses 158 97 E ST MS 770:1982

MS IEC 60155:1996 Glow-starters for fluorescent lamps 159 98 E ST

MS IEC 61008-1: 2007 160 99 E ST

MS IEC 61008-2-1:2003 161 100 E ST

Specification for portable 2 pin socket-outlets for class II equipment for household and similar purposes

MS 1579: 2003

Specification for portable 2 pin socket-outlets for class II Safety of power transformers, power supply units and similar: Part 1: General requirements

and testsMS IEC 61558: Part 1: 2005

Safety of power transformers, power supply units and

MS IEC 61558: Part 1: 2005

Safety of power transformers, power supply units and similar: Part 2-5: Particular requirements for shaver transfomers and shaver supply units

MS IEC 61558: Part 2-5 :2005


MS IEC 61558: Part 2-5 :2005

Safety of power transformers, power supply units and similar: Part 2-6: Particular requirements for safety isolating transformers for general use

MS IEC 61558: Part 2-6: 2006


MS IEC 61558: Part 2-6: 2006

SAFETY OF POWER TRANSFORMERS, POWER SUPPLY UNITS AND SIMILAR - PART 2-7: PARTICULAR REQUIREMENTS FOR TRANSFORMERS FOR TOYS (IEC 61558-2-7:1997, IDT)

MS IEC 61558-2-7:2007

SAFETY OF POWER TRANSFORMERS, POWER SUPPLY UNITS AND

SAFETY OF POWER TRANSFORMERS, POWER SUPPLY UNITS AND SIMILAR - PART 2-17: PARTICULAR REQUIREMENTS FOR TRANSFOMERS FOR SWITCH MODE POWER SUPPLIES (IEC 61558-2-17:1997, IDT)

MS IEC 61558-2-17:2007

SAFETY OF POWER TRANSFORMERS, POWER SUPPLY UNITS AND

MS 770:1982

Specification for ceiling roses

MS IEC 60155:1996

Glow-starters for fluorescent lamps

MS IEC 60155:1996

Residual current operated circuit-breaker without integral overcurrent protection for household and similar uses (RCCBs): Part 1: General rules (1st revision)

MS IEC 61008: Part 1: 2007

Residual current operated circuit-breaker without

MS IEC 61008: Part 1: 2007

Residual current operated circuit-breaker without integral overcurrent protection for household and similar uses (RCCB’s): Part 2-1: Applicability of the general rules to RCCB’s functionally independent of line voltage

MS IEC 61008: Part 2-1: 2003

Residual current operated circuit-breaker without integral

MS IEC 61008: Part 2-1: 2003




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT

MS IEC 61008-2-2:2003 162 101 E ST

MS IEC 61009-1:2005 163 102 E ST Replaced by MS IEC

MS IEC 61009-2-1:2003 164 103 E ST

MS IEC 61009-2-2:2003 165 104 E ST


MS IEC 60898-2: 2007 167 106 E ST Replaced by MS IEC

MS IEC 60269-1:2011 Low-voltage fuses: Part 1: General requirements 168 107 E ST

MS IEC 60269-2:2011 169 108 E ST

MS 1586-3:2003 170 109 E ST

Residual current operated circuit-breaker without integral overcurrent protection for household and similar uses (RCCB’s): Part 2-2: Applicability of the general rules to RCCB’s functionally dependent on line voltage

MS IEC 61008: Part 2-2: 2003

Residual current operated circuit-breaker without integral

MS IEC 61008: Part 2-2: 2003

Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs): Part 1: General rules

MS IEC 61009: Part 1: 2003

Residual current operated circuit-breakers with

MS IEC 61009: Part 1: 2003

Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs): Part 2-1: Applicability of the general rules to RCBO’s functionally independent of line voltage

MS IEC 61009: Part 2-1: 2003

Residual current operated circuit-breakers with integral overcurren

MS IEC 61009: Part 2-1: 2003

Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs): Part 2-2: Applicability of the general rules to RCBOs functionally dependent of line voltage

MS IEC 61009: Part 2-2: 2003

Residual current operated circuit-breakers with integral

MS IEC 61009: Part 2-2: 2003

Electrical accessories - Circuit-breaker for overcurrent protection for household and similar installation: Part 1: Circuit-breaker for a.c operation

MS IEC 60898: Part 1: 2003

Electrical accessories - Circuit-breaker for overcurrent

MS IEC 60898: Part 1: 2007

Circuit-breakers for overcurrent protection for household ans similar installation: Part 2: Circuit-breaker for a.c and d.s. operation

MS IEC 60898: Part 2: 2003

Circuit-breakers for overcurren

MS IEC 60898: Part 2: 2007

MS IEC 60269: Part 1: 2011

Low-voltage fuses: Part 1: General

MS IEC 60269: Part 1: 2011

LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO I (FIRST REVISION) (IEC 60269-2:2006, IDT)

MS IEC 60269-2:2011

LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY

MS IEC 60269: Part 2-1: 2011

Low-voltage fuses: Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications)

MS 1586: Part 3: 2003

Low-voltage fuses: Part 3: Supplementary

MS 1586: Part 3: 2003




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT




MS 140:1987 Specification for insulated flexible cords and cables (1st revision) 174 113 E ST MS 140:1987

MS 136:1995 175 114 E ST MS 136:1995

MS 1936:2007 Electrical installations of buildings - Guide to MS IEC 60364 176 115 E ST Replaced by MS 19 MS 1936:2007

MS 1979:2007 Electrical installations of buildings - Code of Practice 177 116 E ST MS 1979:2007

MS IEC 61558-2-8:2007 55 E ST E ST

MS ISO 8187:2000

55

E ST E ST

LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD OR SIMILAR APPLICATIONS) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO F (IEC 60269-3:2010, IDT)

MS IEC 60269-3:2011

LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED

MS IEC 60269: Part 3-1: 2006

LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES (SECOND REVISION) (IEC 60947-1:2007, IDT)

MS IEC 60947-1:2010

LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1:

MS IEC 60947: Part 1: 2010

LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: SWITCHES, DISCONNECTORS, SWITCH-DISCONNECTORS AND FUSE-COMBINATION UNITS (FIRST REVISION) (IEC 60947-3:2008,IDT)

MS IEC 60947: Part 3: 2010

LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: SWITCHES, DISCONNECTORS,

MS IEC 60947: Part 3: 2000

MS 140:1987

Specification for insulated flexible cords and cables (1st Specification for PVC insulated cables (non armoured) for electric power and lighting (2nd

revision)MS 136:1995

Specification for PVC insulated cables (non armoured) MS

1936:2006

Electrical installations of buildings - Guide to MS IEC MS

1979:2007Electrical installations of buildings - Code of PracticeSAFETY OF SMALL POWER TRANSFORMERS, POWER SUPPLY UNITS AND SIMILAR - PART 2-8:

PARTICULAR REQUIREMENTS FOR BELL AND CHIME TRANSFORMERS (IEC 61558-2-8:1998, IDT)

HOUSEHOLD REFRIGERATING APPLIANCES- REFRIGERATORS - FREEZERS - CHARACTERISTICS AND TEST METHODS (ISO 8187:1991, IDT)




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT

MS 2112-3:2009 179 E ST

MS 2112-4:2009 180 E ST

MS CISPR 22:2009 181 117 E SKMM MS CISPR 22:2009

MS 406:1996 182 MS 406 118 E SKMM MS 406:1996

MS IEC 60038:2006 IEC standard voltages 183 119 E ST

MS IEC 61643-1:2006 184 120 E SKMM

MS 1578:2003 E SKMM MS 1578:2003

MS 589-1:2011 E SKMM

MS 1577:2003 E SKMM MS 1577:2003

MS 140:1987 Specification for insulated flexible cords and cables (1st revision) E SKMM MS 140:1987

MS IEC 60364-1:2007 185 121 E ST

ELECTRIC CABLE AND WIRE - POLYVINYL CHLORIDE (PVC) INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 3: NON-SHEATHED CABLES FOR FIXED WIRING

MS 2112-3:2009

ELECTRIC CABLE AND WIRE - POLYVINYL CHLORIDE

ELECTRIC CABLE AND WIRE - POLYVINYL CHLORIDE (PVC) INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 4: SHEATHED CABLES FOR FIXED WIRING

MS 2112-4:2009

ELECTRIC CABLE AND WIRE - POLYVINYL CHLORIDE (PVC)

Information Technology Equipment - Radio disturbance characteristics - Limits and methods of measurement

MS CISPR 22

Information Technology Equipment - Radio Specification for voltages and frequency for alternating current transmission and distribution

systemsSpecification for voltages and frequency for MS IEC

60038 IEC standard voltages

MS IEC 60038:2006

Surge protective devices connected to low-voltage power distribution systems -Part 1: Performance requirements and testing methods

MS IEC 61643: Part 1: 2004

Surge protective devices connected to low-voltage

MS IEC 61643: Part 1: 2006


*Refer no. 131

MS 1578:2003

Specification for flat non-rewirable two-pole plugs,

*Refer no. 78

Specification for 13A plugs, socket-outlets, adaptors and connection units: Part 1: Specification for rewirable and non-rewirable 13A plugs (1st revision)

*Refer no. 132

MS 589: Part 1: 1997


*Refer no. 79

MS 589: Part 1: 1997


*Refer no. 133

MS 1577:2003


*Refer no. 80

*Refer no. 176

MS 140:1987

Specification for insulated flexible cords and cables (1st

*Refer no. 113

Low-Voltage Electrical Installations: Part 1: Fundamental Principles, Assessment of General Characteristics, Definitions (2nd revision)

MS IEC 60364: Part 1: 2007

Low-Voltage Electrical Installations: Part 1: Fundamen

MS IEC 60364: Part 1: 2007




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT

MS IEC 60364-4-41:2007 186 122 E ST

187 123 E ST Confirmed: 2002

MS IEC 60364-7-712:2007 188 124 E ST

MS IEC 60364-7-708:1996 189 125 E ST

MS IEC 60364-5-55:2003 190 126 E ST

MS IEC 60364-7-705:1996 191 127 E ST Confirmed: 2002

MS IEC 60364-7-706:1996 192 128 E ST

MS IEC 60364-7-702:2003 193 129 E ST

MS IEC 60364-5-52:2003 194 131 E ST

MS IEC 60364-4-43:2003 195 132 E ST


Low-Voltage Electrical Installations: Part 4-41: Protection for Safety - Protection Against Electrical Shock

MS IEC 60364: Part 4-41: 2007

Low-Voltage Electrical Installations: Part 4-41:

MS IEC 60364: Part 4-41: 2007

MS IEC 60364-7:Section 703:1996

Electrical Installations of Buildings: Part 7: Requirements for Special Installations or Locations: Section 703: Locations Containing Sauna Heaters

MS IEC 60364: Part 7: Section 703: 1996

Electrical Installations of Buildings: Part 7: Requireme


Electrical Installations of Buildings: Part 7-712: Requirements for Special Installations or Locations - Solar Photovoltaic (PV) Power Supply Systems

MS IEC 60364: Part 7-712:2007

Electrical Installations of Buildings: Part 7-712: Requireme

MS IEC 60364: Part 7-712:2007

Electrical Installations of Buildings: Part 7: Requirements for Special Installations or Locations: Section 708: Electrical Installations in Caravan Parks and Caravans

MS IEC 60364-7-708:1996


MS IEC 60364-7-708:1996

Electrical Installations of Buildings: Part 5: Selection and Erection of Electrical Equipment: Chapter 55: Other Equipment: Section 551: Low Voltage Generating Sets

MS IEC 60364-5-551 : 1996

Electrical Installations of Buildings: Part 5: Selection

MS IEC 60364-5-551 : 2003

Electrical installations of Buildings: Part 7: Requirements for Special Installations or Locations-Section 705: Electrical Installations of Agricultural and Horticultural Premises

MS IEC 60364-7-705:1996

Electrical installations of Buildings: Part 7: Requireme

MS IEC 60364-7-705:1996

Electrical Installations of Buildings: Part 7: Requirements for Special Installations or Locations: Section 706: Restrictive Conducting Locations

MS IEC 60364-7-706:1996


MS IEC 60364-7-706:1996

Electrical Installations of Buildings: Part 7: Requirements for Special Installations or Locations: Section 702: Swimming Pools and Other Basins

MS IEC 60364-7-702:2003


MS IEC 60364-7-702:2003

Electrical Installations of Buildings: Part 5-52: Selection and Erection of Electrical Equipment-Wiring Systems

MS IEC 60364-5-52:2003

Electrical Installations of Buildings: Part 5-52: Selection

MS IEC 60364-5-52:2003

Electrical Installations of Buildings: Part 4-43: Protection for Safety - Protection Against Overcurrent

MS IEC 60364-4-43:2003

Electrical Installations of Buildings: Part 4-43: Protection

MS IEC 60364-4-43:2003

Electrical Installations of Buildings: Part 7: Requirements for Special Installations or Locations: Section 709: Marinas and Pleasure Craft

MS IEC 60364-7-709:1996


MS IEC 60364-7-709:1996




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT


MS IEC 60364-7-704:2003 198 135 E ST

MS IEC 60364-5-53:2003 199 136 E ST

MS IEC 60364-4-42:2003 200 137 E ST

MS IEC 60364-6-61:2003 Electrical Installations of Buildings: Part 6-61: Verification-Initial Verification 201 138 E ST

MS IEC 60364-5-54:2004 202 139 E ST

MS IEC 60364-4-44:2007 203 140 E ST

MS IEC 60364-5-51:2007 204 141 E ST

MS IEC 60320-2-2:2003 205 142 E ST 2011

MS IEC 61000-3-2 : 2003 206 E ST

Electrical Installations of Buildings: Part 7: Requirements for Special Installations or Locations: Section 707: Earthing Requirements for the Installations of Data Processing Equipment

MS IEC 60364-7-707:1996

Electrical Installations of Buildings: Part 7: Requirements for

MS IEC 60364-7-707:1996

Electrical Installations of Buildings: Part 7: Requirements for Special Installations or Locations: Section 704: Construction and Demolition Site Installations

MS IEC 60364-7-704:2003


MS IEC 60364-7-704:2003

Electrical Installations of Buildings: Part 5-53: Selection and Erection of Electrical Equipment-Isolation, Switching and Control

MS IEC 60364-5-53 : 2003

Electrical Installations of Buildings: Part 5-53: Selection

MS IEC 60364-5-53 : 2003

Electrical Installations of Buildings: Part 4-42: Protection for Safety-Protection Against Thermal Effects

MS IEC 60364-4-42:2003


MS IEC 60364-4-42:2003

MS IEC 60364-6-61 : 2003

Electrical Installations of Buildings: Part 6-61: Verificatio

MS IEC 60364-6-61 : 2003

Electrical Installations of Buildings: Part 5-54: Selection and Erection of Electrical Equipment-Earthing Arrangements, Protective Conductors and Protective Bonding Conductors

MS IEC 60364-5-54:2004

Electrical Installations of Buildings: Part 5-54: Selection and

MS IEC 60364-5-54:2004

Electrical Installations of Buildings: Part 4-44: Protection for Safety-Protection Against Voltage Disturbances and Electromagnetic Disturbances

MS IEC 60364-4-44:2007


MS IEC 60364-4-44:2007

Electrical Installation of Buildings: Part 5-51: Selection and Erection of Electrical Equipment-Common Rules (2nd revision)

MS IEC 60364-5-51:2007

Electrical Installation of Buildings: Part 5-51: Selection

MS IEC 60364-5-51:2007

Appliances couplers for household and similar general purposes: Part 2-2: Interconnection couplers for household and similar equipment

MS IEC 60320: Part 2-2: 2003

Appliances couplers for household and similar general

MS IEC 60320: Part 2-2: 2003

ELECTROMAGNETIC COMPATIBILITY (EMC) – PART 3-2 : LIMITS – LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT ≤ 16 A PER PHASE) (IEC 61000-3-2:2001 ED. 2.1, IDT)




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT

1-Sep-11 MS IEC 62305-1:2007 Protection Against Lightining - Part 1:General Principles (First Revision) 207 143 E ST Pekeliling 03/2011

1-Sep-11 MS IEC 62305-2:2008 Protection Against Lightining - Part 2:Risk Management (First Revision) 208 144 E ST Pekeliling 03/2011

1-Sep-11 MS IEC 62305-3:2009 209 145 E ST Pekeliling 03/2011

1-Sep-11 MS IEC 62305-4:2010 210 146 E ST Pekeliling 03/2011

MS 551:1978 212 F CIDB

MS 863:2010 213 F CIDB

SPECIFICATION FOR FIRE AND BURGLARY RESISTANT OFFICE SAFE 216 F BOMBA

MS 1462-1:2012 219 148 F CIDB MS 1462:1999

MS 1462-2-1:2010 220 F CIDB

MS 1462-2-2:2010 221 F CIDB

MS 1462-3-1:2011 222 F CIDB

MS 1462-3-2:2012 223 F CIDB

MS IEC 62305-1:2007

Protection Against Lightining - Part 1:General Principles

MS IEC 62305-1:2007

MS IEC 62305-2:2008

Protection Against Lightining - Part 2:Risk Management (First

MS IEC 62305-2:2008

Protection Against Lightining -Part 3:Physical Damage to Structures and Life Hazard (First Revision)

MS IEC 62305-3:2009

Protection Against Lightining -Part 3:Physical Damage to

MS IEC 62305-3:2009

Protection Against Lightining - Part 4:Electrical and Electronic Systems within Structures (First Revision)

MS IEC 62305-4:2010

Protection Against Lightining - Part 4:Electrical and

MS IEC 62305-4:2010

SPECIFICATION FOR WIRE ROPES FOR CRANES, EXCAVATORS AND GENERAL ENGINEERING PURPOSES

NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS (SECOND REVISION)

MS 863:2010

NON-ALLOY STEEL TUBES SUITABLE FOR MS 1297 : 1992 MS 1297 :

1992SPECIFICATION FOR FIRE AND BURGLARY

METAL SCAFFOLDING - PART 1: PREFABRICATED SCAFFOLDS - SPECIFICATION FOR STEEL FRAME SCAFFOLDING (FIRST REVISION)

MS 1462 :1999

Steel Frame scaffoldings

METAL SCAFFOLDING - PART 2: TUBULAR (TUBE AND COUPLER) SCAFFOLDS - SECTION 1: SPECIFICATION FOR STEEL TUBES

METAL SCAFFOLDING - PART 2: TUBULAR (TUBE AND COUPLER) SCAFFOLDS - SECTION 2: SPECIFICATION FOR ALUMINIUM TUBE

METAL SCAFFOLDING - PART 3: PREFABRICATED SCAFFOLDS - SECTION 1: SPECIFICATION FOR STEEL AND ALUMINIUM MODULAR SYSTEM SCAFFOLDING

METAL SCAFFOLDING - PART 3: PREFABRICATED SCAFFOLDINGS - SECTION 2: PARTICULAR METHODS OF STRUCTURAL DESIGN FOR STEEL AND ALUMINIUM MODULAR SYSTEM SCAFFOLDINGS




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT

MS 1462-2-3:2011 224 F CIDB

MS ISO 4344:2004 Steel wire ropes for lifts - Minimum requirements 225 149 F CIDB MS ISO 4344:2004

MS ISO 128-1:2010 226 F BOMBA

227 F BOMBA

MS 1841:2010 228 F CIDB

MS 1862 229 F CIDB

MS 1968:2007 231 MS 1968 150 F CIDB MS 1968:2007

MS 1919:2006 232 151 F MITI MS 1919:2006

MS ISO 2408:2004 Steel wire ropes for general purposes - Minimum requirements 233 152 F CIDB MS ISO 2408:2004

MS 971:1985 Specification for Non-pressure kerosene stoves for domestic use 234 MS 971 153 F KPDNKK MS 971:1985

MS 2021-1:2006 Safety rules for the construction and installation - Part 1: Electric lift) 235 154 F DOSH

METAL SCAFFOLDING - PART 2: TUBULAR (TUBE AND COUPLER) SCAFFOLDS - SECTION 3: SPECIFICATION FOR STEEL AND ALUMINIUM COUPLERS, FITTING AND ACCESSORIES

MS ISO 4344:2004

Steel wire ropes for lifts - Minimum requirements TECHNICAL DRAWINGS- GENERAL PRINCIPLES OF PRESENTATION - PART 1: INTRODUCTION

AND INDEX (ISO 128-1:2003, IDT)MS ISO 128-1:2010

TECHNICAL DRAWINGS- GENERAL PRINCIPLES OF MS ISO 129-1:2009 TECHNICAL DRAWINGS - INDICATION OF DIMENSIONS AND TOLERANCES - PART 1:GENERAL

PRINCIPLES (ISO 129-1:2004, IDT)F

MS ISO 129-1:2009

TECHNICAL DRAWINGS - INDICATION OF DIMENSIOSEAMLESS, WELDED AND HEAVILY COLD AUSTENITIC STAINLESS STEEL PIPES - SPECIFICATION

(FIRST REVISION)

SEAMLESS, WELDED AND HEAVILY COLD AUSTENITIC STAINLESS STEEL PIPES - SPECIFICATION (FIRST REVISION)

Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions

Non-alloy steel tubes and fittings for the conveyance of Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and

test methodsMS 1919:2006

Ductile iron pipes, fittings, accessories and their joints for MS ISO

2408 Steel wire ropes for general purposes - Minimum requiremeSpecification for Non-pressure kerosene stoves for domestic




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT

MS 1803:2008 CRANES - SAFETY - TOWER CRANES 236 155 F DOSH

Specification for Motor vehicle gasoline : Part 2 : Unleaded gasoline 239 156 H JAS (Bhgn Udara)

MS 831:2007 241 H BOMBA

MS 912:2008 TEST METHOD FOR LEAD IN GASOLINE - IODINE MONOCHLORIDE METHOD (FIRST REVISION) 242 MS 912 157 H JAS (Bhgn Udara) MS 912:2008

MS ISO 3183:2009 243 158 H CIDB MS ISO 3183

TEST METHOD FOR VOLATILITY OF LIQUEFIED PETROLEUM (LP) GASES (SECOND REVISION) 244 H BOMBA

MS 775:2005 LPG FUEL SYSTEM IN INTERNAL COMBUSTION ENGINES - SPECIFICATION (FIRST REVISION) 245 159 H JPJ MS 775 : 2005

MS 930:2010 Code of Practice for the Installation of Fuel Gas Piping System and Appliances (1st revision) 247 161 H BOMBA MS 930:2010

MS 930:1986 Code of Practice for the Installation of Fuel Gas Piping System and Appliances (1st revision) H DOSH

MS 830 :2003 Code of Practice for The Storage, Handling and Transpotation of LPG (1st revision) H DOSH

PETROLEUM INDUSTRY - TERMINOLOGY - PART 5: TRANSPORT, STORAGE AND DISTRIBUTION 248 H BOMBA

MS ISO 1183-2:2006 249 J BOMBA

MS 118-2:2005, AMD. 1:2009

MS 118:Part 2

Specification for Motor vehicle gasoline : Part 2 :

MS 118 : Part 2 : 2005, AMD. 1:2009)

VALVES FOR USE IN LIQUEFIED PETROLEUM GAS (LPG) CYLINDERS - SPECIFICATION(FIRST REVISION)

MS 831:2007

VALVES FOR USE IN LIQUEFIED PETROLEU Method of test for lead in gasoline (iodine monochlorPetroleum and natural gas industries - Steel pipe for pipeline transportation systems (1st

revision)MS ISO 3183

Petroleum and natural gas industries - Steel pipe for MS 537:2010 MS

537:2010TEST METHOD FOR VOLATILITY

MS 775:1982 (P)

Specification for LPG fuel system in internal combustioMS

930:1986Code of Practice for the Installation of Fuel Gas Piping System

*Refer no. 249

*Refer no. 248

MS 1821: PART 5:2005 (CONFIRMED:2011)

MS 1821: PART 5:2005 (CONFIRM

PETROLEUM INDUSTRY -

PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 2: DENSITY GRADIENT COLUMN METHOD (FIRST REVISION) (ISO 1183-2:2004, IDT)

MS ISO 1183-2:2006

PLASTICS - METHODS FOR DETERMINING THE DENSITY




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT

MS 1419: PART 3:1997 256 J SPAN

259 J SPAN

MS 762:2007 260 J SPAN

POLYETHYLENE (PE) PIPING SYSTEMS FOR WATER SUPPLY – PART 2: PIPES (FOURTH REVISION 264 J SPAN

MS 1736: PART 2:2004 266 J SPAN

MS 1-1:2011 272 162 L JPJ Renumbered MS 1:MS 1-1:2011

MS 1175:2003 Specification for Seat Belts for Motor Vehicles (First Revision) 273 163 L JPJ (Renumbered MS 74MS 1175:2003

MS 75:2002 Specification for anchorages for seat belts 274 164 L JPJ (Renumbered MS 75MS 75:2002

MS ISO 303:2004 Installation of Lighting and Signalling Devices for Motor Vehicles and Their Trailers 275 165 L JPJ MS ISO 303:2004

MS 224:2005 AMD. 1:2010 276 MS 224 166 L JPJ

MS 1394:2008 277 MS 1394 167 L JPJ MS 1394:2008

SPECIFICATION FOR ACRYLONITRILEBUTADIENE STYRENE (ABS) PIPES AND FITTINGS FOR PRESSURE APPLICATIONS PART 3 : SOLVENT CEMENT AND PRIMING (CLEANING) FLUIDS FOR USE WITH ABS PIPES AND FITTINGS

MS 628 : PART 2 : SECTION 2.2 : 1999

SPECIFICATION FOR UNPLASTICISED PVC(UPVC) PIPES FOR WATER SUPPLY : PART 2 : JOINTS AND FITTINGS FOR USE WITH UNPLASTICISED PVC PIPES : SECTION 2.2 : SOLVENT CEMENT

PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS – UNPLASTICISED POLY(VINYL CHLORIDE) (PVC-U) – SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM(FIRST REVISION)

MS 1058: PART 2:2005, AMD. 1:2011

PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS – CROSSLINKED POLYETHYLENE (PE-X): PART 2: PIPES (ISO 15875-2:2002, MOD)

PROTECTIVE HELMETS AND VISORS FOR VEHICLE USERS - SPECIFICATION - PART 1: PROTECTIVE HELMETS (THIRD REVISION)

MS 6.1:1969

Specifications for protective helmets for vehicle usersMS

6.3:1972 Specification for Seat Belts for Motor Vehicles (First MS

6.29:1978 Specification for anchorages for seat belts

MS ISO 303:2004

Installation of Lighting and Signalling Devices for Motor Retreaded Pneumatic Rubber Tyres for Passengers Cars and Commercial Vehicles-

Specification (2nd revision)Retreaded Pneumatic Rubber Tyres for Passengers Cars and

MS 224:2005 AMD. 1:2010

New Pneumatic Tyres for Highway Vehicles Other Than Passenger Cars- Specifications (1st revision)

New Pneumatic Tyres for Highway Vehicles Other Than




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT

MS 149:2008 NEW PNEUMATIC PASSENGER CAR TYRES - SPECIFICATION (SECOND REVISION) 278 MS 149 168 L JPJ MS 149:2008

Julai 2010 MS 1742-1:2004 Vehicle security systems: Part 1: Guidelines to the application of security systems to vehicles 279 169 L JPJ

Julai 2010 MS 1742-2:Section 1:2004 Vehicle security systems: Part 2: Locking systems: Section 1: Specification for locking systems 280 170 L JPJ

Julai 2010 MS 1742-2: Section 2:2004 281 171 L JPJ



Julai 2010 MS 1742-3:2004 Vehicle security systems: Part 3: Specification for alarm systems 284 174 L JPJ

Julai 2010 MS 1742-4: 2005 Vehicle security systems: Part 4: Specification for immobilizer 285 175 L JPJ

Jan-12 MS 2413-1:2011 (P) ELECTRIC MOTORCYCLE - SPECIFICATION - PART 1: GENERAL 286 MS 2413 176 L JPJ MS 2413-1:2011 (P)

MS 2413-2:2011 (P) ELECTRIC MOTORCYCLE - SPECIFICATION - PART 2: SAFETY 287 MS 2413 176 L JPJ MS 2413-2:2011 (P)

Nov-14 MS 1164:2005 1 MS 1164 1 L KPDNKK

New Pneumatic Passenger Car Tyres- Specification MS 1742:

Part 1: 2004

Vehicle security systems: Part 1: Guidelines to the

MS 1742: Part 1: 2004

MS 1742: Part 2: Section 1: 2004

Vehicle security systems: Part 2: Locking systems:


Vehicle security systems: Part 2: Locking systems: Section 2: Specification for central power locking systems




Vehicle security systems: Part 2: Locking systems: Section 3: Specification for dead locking systems




Vehicle security systems: Part 2: Locking systems: Section 4: Specification for devices for ptevention against unauthorised use




MS 1742: Part 3: 2004

Vehicle security systems: Part 3: Specification for

MS 1742: Part 3: 2004

MS 1742: Part 4: 20045

Vehicle security systems: Part 4: Specification for

MS 1742: Part 4: 2005

Specification for electric motorcycyleSpecification for electric motorcycyle

ROAD VEHICLES - REPLACEMENT BRAKE LINING ASSEMBLIES AND DRUM BRAKE LININGS FOR POWER-DRIVEN VEHICLES SPECIFICATION (FIRST REVISION)




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT

MS 2413-3:2011 (P) ELECTRIC MOTORCYCLE - SPECIFICATION - PART 3: PERFORMANCE TEST 288 MS 2413 176 L JPJ MS 2413-3:2011 (P)

MS 1183-8:1990 (P) 289 177 M

MS 1038-1:1986 292 180 M BOMBA

295 M BOMBA

RECHARGING FIRE EXTINGUISHERS PART 2 : SPECIFICATION FOR POWDER REFILL CHARGES 296 M BOMBA

CLASSIFICATION OF FIRES 297 M BOMBA

MS 1745-1:2004 Fire Detection and Fire Alarm Systems: Part 1: Introduction 316 191 M BOMBA

MS 1745-2:2004 Fire Detection and Fire Alarm Systems: Part 2: Control and Indicating Equipment 317 192 M BOMBA

MS 1745-13:2006 325 197 M BOMBA

MS 1745 - 14:2009 326 M BOMBA

Specification for electric motorcycyle

Specification for Fire Precautions in the Design and Construction of Buildings: Part 8: Code of Practice for Means of Escape for Disabled People

MS 1183: Part 8: 1990 (P)

Specification for Fire Precautions in the Design and Construction of Buildings: Part 8: Code of Practice for Means


Malaysia

MS 1183: Part 8: 1990 (P)

Specification for Emergency Lighting of Premises Part 1: Premises Other Than Cinemas and Certain Other Specified Premises Used for Entertainment

MS 1038: Part 1: 1986

Specification for Emergency Lighting of Premises Part 1: Premises

MS 1038: Part 1: 1986

MS 1181: PART 1:1990 RECHARGING FIRE EXTINGUISHERS PART 1 : SPECIFICATION FOR PROCEDURE AND MATERIALS

MS 1181: PART 1:1990

RECHARGING FIRE EXTINGUISHERS PART

MS 1181: PART 2:1990 MS 1181: PART 2:1990

RECHARGING FIRE EXTINGUISHERS PART

MS 1182:1990 MS 1182:1990

CLASSIFICATION OF FIRES

MS 1745: Part 1

Fire Detection and Fire Alarm Systems: Part 1: Introductio

MS 1745: Part 1: 2004

MS 1745: Part 2

Fire Detection and Fire Alarm Systems: Part 2: Control

MS 1745: Part 2: 2004

Fire Detection and Fire Alarm Systems: Part 13: Compatibility Assessment of Systems Components

MS 1745: Part 13

Fire Detection and Fire Alarm Systems: Part 13: Compatibili

MS 1745: Part 13: 2006

Fire Detection and alarm systems - Part 1 : introduction systems-part 14:guidelines for planning,design,installation,commissioning, use and maintenance

MS 1745 - 14:2009

Fire Detection and alarm systems - Part 1 : introduction systems-




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT

MS 1395:2011 Specification for Pillar Hydrant 333 203 M BOMBA MS 1395:2011

338 M BOMBA

MS 1471 : PART 2 : 1999 VOCABULARY ON FIRE PROTECTION : PART 2 : STRUCTURAL FIRE PROTECTION 339 M BOMBA

340 M BOMBA

MS 1176-9:1993 345 212 M BOMBA

MS 1471-3:1999 Vocabulary on Fire Protection: Part 3: Fire Detection and Alarm 346 213 M BOMBA

MS 1471 : PART 4 : 1999 VOCABULARY ON FIRE PROTECTION : PART 4 : FIRE EXTINCTION EQUIPMENT 347 M BOMBA

MS 1471 : PART 5 : 1999 VOCABULARY ON FIRE PROTECTION : PART 5 : SMOKE CONTROL 348 M BOMBA

MS 1471 : PART 8 : 1999 350 M BOMBA

FIRE PROTECTION – FIRE EXTINGUISHING MEDIA – CARBON DIOXIDE 351 M BOMBA

352 M BOMBA

MS 1395:2011

Specification for Pillar Hydrant

MS 1471 : PART 1 : 1999 VOCABULARY ON FIRE PROTECTION : PART 1 : GENERAL TERMS AND PHENOMENA OF FIREM

MS 1471 : PART 1 : 1999

VOCABULARY ON FIRE PROTECTION : PART 1 : GENERAL MS 1471 :

PART 2 : 1999

VOCABULARY ON FIRE PROTECTION : PART MS 1471 : PART 7 : 1999 VOCABULARY ON FIRE PROTECTION : PART 7 : EXPLOSION DETECTION AND SUPPRESSION

MEANSMS 1471 : PART 7 : 1999

VOCABULARY ON FIRE PROTECTION : PART 7 : EXPLOSION Specification for Compenents of Automatic Fire Detection System: Part 9: Methods of Test of

Sensitivity to FireMS 1176: Part 9

Specification for Compenents of Automatic Fire Detection

MS 1176: Part 9: 1993

MS 1471:Part 3

Vocabulary on Fire Protection: Part 3: Fire Detection and Alarm

MS 1471: Part 3: 1999

MS 1471 : PART 4 : 1999

VOCABULARY ON FIRE PROTECTION : PART MS 1471 :

PART 5 : 1999

VOCABULARY ON FIRE PROTECTIVOCABULARY ON FIRE PROTECTION : PART 8 : TERMS SPECIFIC TO FIRE FIGHTING RESCUE

SERVICES AND HANDLING HAZARDOUS MATERIALS----

MS 1471 : PART 8 : 1999

VOCABULARY ON FIRE PROTECTION : PART 8 : TERMS SPECIFIC TO FIRE

MS ISO 5923 : 2003 MS ISO 5923 : 2003

FIRE PROTECTION – FIRE EXTINGUIS

MS ISO 6182-1:2009 FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR SPRINKLERS (FIRST REVISION) (ISO 6182-1:2004, IDT)-

MS ISO 6182-1:2009

FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEMS -




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT

353 214 M BOMBA

354 M BOMBA

355 M BOMBA

MS ISO 6182-5:2009 356 M BOMBA

357 M BOMBA

358 M BOMBA

359 M BOMBA

360 M BOMBA

361 M BOMBA

362 M BOMBA

MS ISO 6182-2:2009 FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEMS - PART 2: REQUIREMENTS AND TEST METHODS FOR WET ALARM VALVES, RETARD CHAMBERS AND WATER MOTOR ALARMS (FIRST REVISION) (ISO 6182-2:2005, IDT)

MS ISO 6182-2:2009


MS ISO 6182-3:2009 FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEMS - PART 3: REQUIREMENTS AND TEST METHODS FOR DRY PIPE VALVES (FIRST REVISION) (ISO 6182-3:2005, IDT)

MS ISO 6182-3:2009

FIRE PROTECTION - AUTOMATIC SPRINKLER MS ISO 6182-4:2000

(CONFIRMED:2011)FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEMS - PART 4: REQUIREMENTS AND TEST METHODS FOR QUICK-OPENING DEVICES (ISO 6182-4:1993, IDT

MS ISO 6182-4:2000 (CONFIRMED:2011)

FIRE PROTECTION - AUTOMATIC SPRINKLER FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEMS - PART 5: REQUIREMENTS AND TEST

METHODS FOR DELUGE VALVES (FIRST REVISION) (ISO 6182-5:2006, IDT)MS ISO 6182-5:2009

FIRE PROTECTION - AUTOMATIC SPRINKLER MS ISO 6182-7:2009 FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEMS - PART 7: REQUIREMENTS AND TEST

METHODS FOR EARLY SUPPRESSION FAST RESPONSE (ESFR) SPRINKLERS (ISO 6182-7:2004, IDT)

MS ISO 6182-7:2009


MS ISO 6182-8:2009 FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEMS - PART 8: REQUIREMENTS AND TEST METHODS FOR PRE-ACTION DRY ALARM VALVES (ISO 6182-8:2006, IDT)-

MS ISO 6182-8:2009


MS ISO 6182-9:2009 FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEM - PART 9: REQUIREMENTS AND TEST METHODS FOR WATER MIST NOZZLES (ISO 6182-9:2005, IDT)

MS ISO 6182-9:2009


METHODS FOR DOMESTIC SPRINKLERS (ISO 6182-10:2006, IDT)MS ISO 6182-10:2009


METHODS FOR PIPE HANGERS (ISO 6182-11:2003, IDT)MS ISO 6182-11:2009


MS ISO 6182-6:2009 FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEMS - PART 6: REQUIREMENTS AND TEST METHODS FOR CHECK VALVES (ISO 6182-6:2006, IDT)

MS ISO 6182-6:2009

FIRE PROTECTION - AUTOMATIC SPRINKLER




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT

MS 1746 : PART 1 : 2008 363 M BOMBA

MS 1746 : PART 8 : 2008 364 M BOMBA

MS 1746 : PART 9 : 2008 365 M BOMBA

MS 1746 : PART 10 : 2008 366 M BOMBA

MS 1746 : PART 11 : 2008 367 M BOMBA

MS 1746 : PART 12 : 2008 368 M BOMBA

MS 1746 : PART 13 : 2008 369 M BOMBA

MS 1746 : PART 14 : 2008 370 M BOMBA

MS 1746 : PART 15 : 2008 371 M BOMBA

372 N BOMBA

MS 606:1991 SPECIFICATION FOR HOT DIP ZINC COATED SHEET AND COIL (FIRST REVISION) 373 P CIDB

Gaseous Fire-Extinguishing Systems-Physical Properties And System Design -Part 1:General Requirement (First Revision)(ISO 14520-1:2006, MOD)

MS 1746 : PART 1 : 2008

Gaseous Fire-Extinguishing Systems-Physical Gaseous Fire-Extinguishing Systems-Physical Properties And System Design -Part 8:HFC 125

Extinguishant (First Revision) (ISO 14520-8:2006, IDT)MS 1746 : PART 8 : 2008

Gaseous Fire-Extinguishing Systems-Physical Gaseous Fire-Extinguishing Systems-Physical Properties And System Design -Part 9:HFC

227EA Extinguishant (First Revision) (ISO 14520-8:2006, IDT)----

MS 1746 : PART 9 : 2008

Gaseous Fire-Extinguishing Systems-Physical Properties

Gaseous Fire-Extinguishing Systems-Physical Properties And System Design -Part 10 : HFC 23 Extinguishant (First Revision) (ISO 14520-10:2005, IDT)

MS 1746 : PART 10 : 2008

Gaseous Fire-Extinguishing Systems-Physical Gaseous Fire-Extinguishing Systems-Physical Properties And System Design -Part 11 : HFC

236FA Extinguishant (First Revision) (ISO 14520-11:2005, MOD)----

MS 1746 : PART 11 : 2008


Gaseous Fire-Extinguishing Systems-Physical Properties And System Design -Part 12 :IG-01 Extinguishant (First Revision) (ISO 14520-12:2005, IDT)

MS 1746 : PART 12 : 2008

Gaseous Fire-Extinguishing Systems-Physical Gaseous Fire-Extinguishing Systems-Physical Properties And System Design -Part 13 :IG-100

Extinguishant (First Revision) (ISO 14520-13:2005,IDT)----

MS 1746 : PART 13 : 2008


Gaseous Fire-Extinguishing Systems-Physical Properties And System Design -Part 14 :IG-55 Extinguishant (First Revision) (ISO 14520-14:2005, IDT)

MS 1746 : PART 14 : 2008

Gaseous Fire-Extinguishing Systems-Physical Gaseous Fire-Extinguishing Systems-Physical Properties And System Design -Part 15 :IG-541

Extinguishant (First Revision) (ISO 14520-15:2005, IDT)-----

MS 1746 : PART 15 : 2008


MS 773 : 1999 SPECIFICATION FOR FLEXIBLE RUBBER TUBING AND HOSE FOR USE IN LPG VAPOUR PHASE AND LPG/AIR INSTALLATIONS

MS 773 : 1999

SPECIFICATION FOR FLEXIBLE RUBBER TUBING AND HOSE MS

606:1991SPECIFICATION FOR HOT DIP ZINC




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT

MS 1238:2009 CONDUCTORS FOR OVERHEAD LINES - ZINC COATED STEEL WIRES (FIRST REVISION) 374 MS 1238 215 P CIDB MS 1238:2009

MS 1239-2:2009 375 216 P CIDB

MS 1240:1991 SPECIFICATION FOR GALVANIZED STEEL WIRE FOR ARMOURING SUBMARINE CABLES 376 P CIDB

MS 1494:2000 Specification for billets for hot rolled non-alloyed steel bars and rods 377 MS 1494 217 P CIDB MS 1494:2000

MS 1495:2000 Specification for blooms for hot rolled non-alloyed structural steel sections 378 MS 1495 218 P CIDB MS 1495:2000

2009 MS 1496:2000 Specification for beam blanks for hot rolled non-alloyed structural steel sections 379 MS 1496 219 P CIDB MS 1496:2000

2009 MS 1795:2005 Steels for cold heading and cold extruding - Specification 380 MS 1795 220 P MITI MS 1795:2005

2009 MS 1945:2006 Free cutting steels 381 MS 1945 221 P MITI MS 1945:2006

382 P BOMBA

2009 MS 2240-2:2009 Stainless steels for general purposes: Part 2: Semi-finished products, bars, rods and sections 383 222 P CIDB

2009 MS 2245:2009 (P) Rolled carbon steel for cold-finished steel bars 384 223 P MITI MS 2245:2009 (P)

2009 MS 2246:2009 (P) Specification for deformed and plain carbon-Steel bars for concrete reinforcement 385 224 P CIDB MS 2246:2009 (P)

Specification for galvanized steel wire for aluminium Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or

telecommunication cables: Part 2: Submarine Cables (1st revision)MS 1239: Part 2: 2009

Zinc or zinc alloy coated non-alloy steel wire for

MS 1239: Part 2: 2009

MS 1240:1991

SPECIFICATION FOR GALVANIZED STEEL Specification for billets for hot rolled non-alloyed Specification for blooms for hot rolled non-alloyed Specification for beam blanks for hot rolled non-Steels for cold heading and cold extruding - SpecificatiFree cutting steels

MS 2338:2010 STEEL FIBRES FOR CONCRETE - DEFINITIONS, SPECIFICATIONS AND CONFORMITYP

MS 2338:2010

STEEL FIBRES FOR CONCRETE

MS 2240: Part 2

Stainless steels for general purposes: Part 2: Semi-

MS 2240: Part 2:2009

MS 2245:2009 (P)

Rolled carbon steel for cold-finished steel barsMS

2246:2009 (P)

Specification for deformed and plain carbon-Steel bars




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT

2009 MS 2247:2009 (P) Carbon steels for machine structural use 386 225 P CIDB MS 2247:2009 (P)

2009 MS 2259:2009 (P) Cold finished carbon and alloy steel bars 387 226 P CIDB MS 2259:2009 (P)

MS 2385:2011 388 P CIDB

2009 MS ISO 3574:2009 (P) Cold-reduced carbon steel sheet of commercial and drawing qualities 389 227 P CIDB

2009 MS ISO 4960:2009 (P) Cold-reduced carbon steel strip with a mass fraction of carbon over 0,25 % 390 228 P CIDB

2009 MS ISO 4997:2009 (P) Cold-reduced carbon steel sheet of structural quality 391 229 P CIDB

2009 MS ISO 5001:2009 (P) Cold-reduced carbon steel sheet for vitreous enamelling 392 230 P CIDB

2009 MS ISO 5002:2009 (P) 393 231 P CIDB

2009 MS ISO 6932:2009 (P) Cold-reduced carbon steel strip with a maximum carbon content of 0,25 % 394 232 P CIDB

2009 MS ISO 13887:2009 (P) Cold-reduced steel sheet of higher yield strength with improved formability 395 233 P MITI

2009 MS ISO 14590:2009 (P) 396 234 P MITI

MS 2247:2009 (P)

Carbon steels for machine structural use

MS 2259:2009 (P)

Cold finished carbon and alloy steel bars

CONTINUOUS HOT-DIP ZINC-COATED CARBON STEELS HEET OF COMMERCIAL AND DRAWING QUALITIES (SECOND REVISION)

MS ISO 3574:2009 (P)

Cold-reduced carbon steel sheet of commercia

MS ISO 3574:2009 (P)

MS ISO 4960:2009 (P)

Cold-reduced carbon steel strip with a mass

MS ISO 4960:2009 (P)

MS ISO 4997:2009 (P)

Cold-reduced carbon steel sheet of structural

MS ISO 4997:2009 (P)

MS ISO 5001:2009 (P)

Cold-reduced carbon steel sheet for vitreous

MS ISO 5001:2009 (P)

Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities

MS ISO 5002:2009 (P)

Hot-rolled and cold-reduced electrolytic zinc-coated

MS ISO 5002:2009 (P)

MS ISO 6932:2009 (P)

Cold-reduced carbon steel strip with a maximum

MS ISO 6932:2009 (P)

MS ISO 13887:2009 (P)

Cold-reduced steel sheet of higher yield strength

MS ISO 13887:2009 (P)

Cold-reduced steel sheet of high tensile strength and low yield point with improved formability

MS ISO 14590:2009 (P)

Cold-reduced steel sheet of high tensile strength

MS ISO 14590:2009 (P)




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT

2009 MS ISO 16120-1:2008 Non-alloy steel wire rod for conversion to wire: Part 1: General requirements (1st revision) 397 235 P CIDB

2009 MS ISO 16120-2:2008 398 236 P CIDB

2009 MS ISO 16120-3:2008 399 237 P CIDB

2009 MS ISO 16120-4:2008 400 238 P MITI

2009 MS ISO 16650:2009 (P) Bead wire 401 Bead wire 239 P CIDB

2009 MS EN 10025-2:2011 402 241 P MITI

2009 MS EN 10025-3:2011 403 242 P MITI

2009 MS EN 10025-4:2011 404 243 P MITI

2009 MS EN 10025-5:2011 405 244 P MITI

2009 MS EN 10025-6:2011 406 245 P MITI

2009 MS 146:2006 Hot rolled steel bars for the reinforcement of concrete - Specification (3rd revision) 407 MS 146 246 P CIDB MS 146:2006

MS ISO 16120: Part 1

Non-alloy steel wire rod for conversion to wire: Part 1:

MS ISO 16120: Part 1: 2008

Non-alloy steel wire rod for conversion to wire: Part 2: Specific requirements for general purpose wire rod (1st revision)



MS ISO 16120: Part 2: 2008

Non-alloy steel wire rod for conversion to wire: Part 3: Specific requirements for rimmed and rimmed substitute low carbon steel wire rod (1st revision)



MS ISO 16120: Part 3: 2008

Non-alloy steel wire rod for conversion to wire: Part 4: Specific requirements for wire rod for special applications



MS ISO 16120: Part 4: 2008

MS ISO 16650:2009 (P)

MS ISO 16650:2009 (P)

Hot rolled products of structural steels: Part 2: Technical delivery conditions for non-alloy structural steels

MS EN 10025: Part 2:2009 (P)

Hot rolled products of structural steels: Part 2:

MS EN 10025: Part 2:2009 (P):2011

Hot rolled products of structural steels: Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels

MS EN 10025: Part 3:2009 (P)


MS EN 10025: Part 3:2009 (P):2011

Hot rolled products of structural steels: Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels

MS EN 10025: Part 4:2009 (P)


MS EN 10025: Part 4:2009 (P) :2011

Hot rolled products of structural steels: Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance

MS EN 10025: Part 5:2009 (P)


MS EN 10025: Part 5:2009 (P) :2011

Hot rolled products of structural steels: Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition

MS EN 10025: Part 6:2009 (P)

Hot rolled products of structural steels: Part 6: Technical

MS EN 10025: Part 6:2009 (P):2011

Hot rolled steel bars for the reinforcement of concrete -




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT

2009 MS 1196:2004 408 247 P CIDB MS 1196:2004

2009 MS EN 10025-1:2011 Hot rolled products of structural steels: Part 1: General technical delivery conditions 409 MS 1490 P CIDB replace to MS EN 10

MS 1092:1987 SPECIFICATION FOR LOW CARBON STEEL WIRE RODS 410 248 P CIDB MS 1092 : 1987

MS 1093:1987 SPECIFICATION FOR HIGH CARBON STEEL WIRE RODS 411 249 P CIDB MS 1093 : 1987

MS 1137:2009 LOW CARBON STEEL WIRES - SPECIFICATION (FIRST REVISION) 412 250 P CIDB MS 1137:2009

MS 1138-2:2007 PRESTRESSING STEEL - PART 2: COLD-DRAWN WIRE 413 251 P CIDB

MS 1138-1:2007 PRESTRESSING STEEL - PART 1: GENERAL REQUIREMENTS 414 252 P CIDB

MS 1138-3:2007 PRESTRESSING STEEL - PART 3: STEEL BARS (QUENCHED AND TEMPERED) 415 253 P CIDB

MS 1138-4:2007 PRESTRESSING STEEL - PART 4: STRAND FOR PRESTRESSED CONCRETE 416 254 P CIDB

MS 1239-1:2009 417 255 P CIDB MS 1239-1:2009

MS 144:2006 418 256 P CIDB MS 144:2006

Continuous hot-dip aluminium/zinc-coated steel sheet of commercial, drawing and structural qualities (1st revision)

MS 1196:2004

Continuous hot-dip aluminium/zinc-coated steel sheet Dimension mass and tolerance of hot rolled non-alloy

MS EN 10025-1:2011

MS 1092 : 1987

SPECIFICATION FOR LOW CARBON STEEL WIRE MS 1093 :

1987SPECIFICATION FOR HIGH CARBON STEEL WIRE MS

1137:2009LOW CARBON STEEL WIRES - SPECIFICATION (FIRST MS

1138 :Part 2 : 2007

PRESTRESSING STEEL - PART 2: COLD-DRAWN WIRE

MS 1138 :Part 2 : 2007

MS 1138: Part 1 : 2007

PRESTRESSING STEEL - PART 1: GENERAL REQUIREMENTS

MS 1138: Part 1 : 2007

MS 1138: Part 3 : 2007

PRESTRESSING STEEL - PART 3: STEEL BARS (QUENCHE

MS 1138: Part 3 : 2007

MS 1138: Part 4 : 2007

PRESTRESSING STEEL - PART 4: STRAND FOR PRESTRESS

MS 1138: Part 4 : 2007

ZINC OR ZINC COATED NON-ALLOY STEEL WIRE FOR ARMOURING EITHER POWER CABLES OR TELECOMMUNICATION CABLES - LAND CABLES (FIRST REVISION)

MS 1239-1:2009

ZINC OR ZINC COATED NON-ALLOY STEEL COLD REDUCED MILD STEEL WIRE FOR THE REINFORCEMENT OF CONCRETE - SPECIFICATION

(THIRD REVISION)MS 144:2006

COLD REDUCED MILD STEEL WIRE FOR THE




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT

MS 145:2006 419 257 P CIDB MS 145:2006

MS 1705:2003 Hot-rolled carbon steel strip and sheet of commercial and drawing qualities 420 258 P MITI MS 1705:2003

MS 1721:2003 Structural steels - plates, wide flats and wide strips 421 MS 1721 259 P CIDB MS 1721 :2003

MS 1768:2004 Hot-rolled carbon steel strip for pipes and tubes 422 260 P CIDB MS 1768:2004

MS 2025-1:2006 Cold formed sheet piling of non alloy steels: Part 1: Technical delivery 423 261 P CIDB

MS 2025-2:2006 Cold formed sheet piling of non alloy steels: Part 2: Tolerances on shape and dimension 424 262 P CIDB

MS IEC 60364-7-710:2009 425 263 R ST

MS IEC 60238:2008 EDISON SCREW LAMPHOLDERS (FIRST REVISION) (IEC 60238:2004, IDT) 426 S ST

MS IEC 60320-1:2010 Appliances couplers for household and similar general purposes: Part 1: General requirements 427 264 S ST

MS IEC 60061-2:2005 428 S ST

MS IEC 60065:2007 Audio, video and similar electronic apparatus – safety requirements (1st revision) 429 265 S ST

MS IEC 60400:2006 Lampholders for tubular fluorescent lamps and starterholders 430 266 S ST

WELDED STEEL FABRIC FOR THE REINFORCEMENT OF CONCRETE - SPECIFICATION (THIRD REVISION)

MS 145:2006

WELDED STEEL FABRIC FOR THE REINFORCEMENT OF MS

1705:2003 Hot-rolled carbon steel strip and sheet of commerciaStructural steels - plates, wide flats and wide stripsMS

1768:2004 Hot-rolled carbon steel strip for pipes and tubes

MS 2025: Part 1: 2006

Cold formed sheet piling of non alloy steels: Part

MS 2025: Part 1: 2006

MS 2025: Part 2: 2006

Cold formed sheet piling of non alloy steels: Part

MS 2025: Part 2: 2006

Electrical Installations of Buildings: Part 7-710: Requirements for Special Installations or Locations-Medical Locations

MS IEC 60364-7-710:2009

Electrical Installations of Buildings: Part 7-710: Requireme

MS IEC 60364-7-710:2009

MS IEC 60320: Part 1: 2010

Appliances couplers for household and similar general

MS IEC 60320: Part 1: 2010

LAMP CAPS AND HOLDERS TOGETHER WITH GAUGES FOR THE CONTROL OF INTERCHANGEABILITY AND SAFETY - PART 2: LAMP HOLDERS (IEC 60061-2:2005, IDT)

MS IEC 60065:2007

Audio, video and similar electronic apparatus – safety

MS IEC 60065:2007

MS IEC 60400:1999

Lampholders for tubular fluorescent lamps and starterhold

MS IEC 60400:2006




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT

MS 769:1982 Specification for bayonet lamps-caps lampholders and B.C. adaptors (lampholder dr plugs) 431 267 S ST Confirmed 2006 MS 769:1982

Luminaires: Part 2: Particular requirements: Section 1: Fixed general purpose luminaires 432 268 S ST

Luminaires: Part 2: Particular requirements: Section 2: Recessed luminaires 433 269 S ST

MS IEC 60838-1:2008 434 S ST

MS IEC 60838-2-2:2008 435 S ST

MS IEC 61048:2006 436 270 S ST

MS IEC 61049:1999 437 271 S ST

MS IEC 61347-1:2003 Lamp controlgear: Part 1: General and safety requirements 438 272 S ST

MS IEC 61347-2-8:2003 Lamp controlgear: Part 2-8: Particular requirements for ballast for fluorescent lamps 439 273 S ST

Specification for ballasts for tubular fluorescent lamps: Part 2: Performance requirements 440 274 S ST AMD.1: 1997

MS IEC 61347-2-3:2003 441 275 S ST

442 S ST 2012

MS 769:1982

Specification for bayonet lamps-caps lampholders and B.C. MS IEC 60598-2:Section

1:1997 MS IEC 60598: Part 2: Section 1: 1997

Luminaires: Part 2: Particular requirements: Section 1:


MS IEC 60598-2: Section 2:1998




MISCELLANEOUS LAMPHOLDERS – PART 1: GENERAL REQUIREMENTS AND TESTS (FIRST REVISION) (IEC 60838-1:2004, IDT)

MISCELLANEOUS LAMPHOLDERS – PART 2: PARTICULAR REQUIREMENTS – CONNECTORS FOR LED MODULES (IEC 60838-2-2:2006, IDT)

Auxiliaries for lamps – Capacitors for use in tubular fluorescent and other discharge lamp circuits – General and safety requirements

MS IEC 61048:2006

Auxiliaries for lamps – Capacitors for use in tubular fluorescent

MS IEC 61048:2006

Capacitors for use in tubular fluorescent and other discharge lamp circuits performance requirements

MS IEC 61049:1999

Capacitors for use in tubular fluorescent and other discharge

MS IEC 61049:1999

MS IEC 61347: Part 1: 2003

Lamp controlgear: Part 1: General and safety requireme

MS IEC 61347: Part 1: 2003

MS IEC 61347: Part 2-8: 2003

Lamp controlgear: Part 2-8: Particular requirements for

MS IEC 61347: Part 2-8: 2003

MS 141-2:1993,AMD.1:1997

MS 141: Part 2: 1993

Specification for ballasts for tubular fluorescent lamps: Part

MS 141: Part 2: 1993,AMD.1: 1997

Lamp controgear: Part 2-3: Particular requirements for a.c supplied electronic ballasts for fluorescent lamps

MS IEC 61347: Part 2-3: 2003

Lamp controgear: Part 2-3: Particular requirements for a.c

MS IEC 61347: Part 2-3: 2003

MS IEC 61347-2-13:2012 (P)

LAMP CONTROLGEAR - PART 2-13: PARTICULAR REQUIREMENTS FOR D.C. OR A.C. SUPPLIED ELECTRONIC CONTROLGEAR FOR LED MODULES (IEC 61347-2-13:2006, IDT)

MS IEC 61347-2-13:2012 (P)

LAMP CONTROLGEAR - PART 2-13: PARTICULAR




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT

MS IEC 60929:2008 443 276 S ST

MS IEC 60335-1:2005 Household and similar electrical appliances – safety: Part 1: General requirements 444 277 S ST 2013

MS IEC 60335-2-2:2006 445 278 S ST

MS IEC 60745-2-15:2006 446 279 S ST 2011

MS IEC 60335-2-21:2005 447 280 S ST

MS IEC 60335-2-23:2005 448 281 S ST

MS IEC 60335-2-28:2003 449 282 S ST

MS IEC 60335-2-101:2003 450 283 S ST

MS 1597-2-21:2011 451 S ST

MS 1597-2-35:2010 452 284 S ST

Specification for a.c supplied electronic ballasts for tubular fluorescent lamps-performance requirements

MS IEC 60929:2008

Specification for a.c supplied electronic ballasts for tubular

MS IEC 60929:2001

MS IEC 60335-1:2005

Household and similar electrical appliances – safety: Part 1:

MS IEC 60335: Part 1: 2003

Household and similar electrical appliances - Safety: Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliance

MS IEC 60335: Part 2-2: 2006

Household and similar electrical appliances - Safety: Part 2-2:

MS IEC 60335: Part 2-2: 2006

Safety of hand-held motor-operated electric tools: Art 2-15: Particular requirements for hedge trimmers and grass shears

MS IEC 60745: Part 2-15: 2006

Safety of hand-held motor-operated electric tools: Art

MS IEC 60745: Part 2-15: 2006

Household and similar electrical appliances – Safety: Part 2-21: Particular requirements for storage water heaters

MS IEC 60335-2-21:2005

Household and similar electrical appliances – Safety: Part 2-21:

MS IEC 60335: Part 2-21: 2005

Household and similar electrical appliances – safety: Part 2-23: Particular requirements for appliances for shin or hair care

MS IEC 60335: Part 2-23: 2003

Household and similar electrical appliances – safety: Part 2-23:

MS IEC 60335: Part 2-23: 2005

Household and similar electrical appliances - Safety: Part 2-28: Particular requirements for sewing machines

MS IEC 60335: Part 2-28: 2003


MS IEC 60335: Part 2-28: 2003

Household and similar electrical appliances - Safety: Part 2-101: Particular requirements for vaporizers

MS IEC 60335: Part 2-101: 2003


MS IEC 60335: Part 2-101: 2003

HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-21: PARTICULAR REQUIREMENTS FOR STORAGE WATER HEATERS (SECOND REVISION) (IEC 60335-2-21:2009, MOD)

MS 1597-2-21:2011

HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCE

Safety of household and similar electric appliances: Part 2-35: Particular requirements for instantaneous water heater (1st revision)

MS 1597-2-35:2010

Safety of household and similar electric appliances: Part 2-35:

MS 1597: Part 2-35: 2010




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT

MS 1597-2-75:2005 453 S ST

454 285 S ST

MS IEC 60598-2-8:2006 455 286 S ST

MS IEC 60335-2-12:2003 456 287 S ST

MS IEC 60335-2-15:2004 457 288 S ST

MS IEC 60335-2-13:2006 458 289 S ST

MS IEC 60335-2-9:2006 459 290 S ST

MS IEC 60335-2-36:2003 460 291 S ST

MS IEC 60335-2-3:2006 461 292 S ST

MS IEC 60335-2-8:2002 462 293 S ST

MS IEC 60335-2-14:2003 463 294 S ST

HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-75: PARTICULAR REQUIREMENTS FOR COMMERCIAL DISPENSING APPLIANCES AND VENDING MACHINES (IEC 60335-2-75:2005, MOD)

MS 1597-2-75:2005

HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY

MS IEC 60598-2:Section 4:2003

Luminaires: Part 2: Particular requirements: Section 4: Portable general purpose luminaires (1st revision)




Luminaires: Part 2-8: Particular requirements handlamps (1st revision) MS IEC 60598: Part 2-8: 1998

Luminaires: Part 2-8: Particular requirements handlamps

MS IEC 60598: Part 2-8: 2006

Household and similar electrical appliances - Safety: Part 2-12 : Particular requirements for warming plates and similar appliances

MS IEC 60335: Part 2-12: 2003

Household and similar electrical appliances - Safety: Part 2-12 :

MS IEC 60335: Part 2-12: 2003

Household and similar electrical appliances - Safety: Part 2-15: Particular requirements for appliances or heating liquids

MS IEC 60335: Part 2-15: 2004


MS IEC 60335: Part 2-15: 2004

Household and similar electrical appliances - Safety: Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances

MS IEC 60335: Part 2-13: 2006


MS IEC 60335: Part 2-13: 2006

Household and similar electrical appliances - Safety: Part 2-9: Particular requirements for grills, toasters, and similar portable cooking appliances

MS IEC 60335: Part 2-9: 2006


MS IEC 60335: Part 2-9: 2006

Household and similar electrical appliances - Safety: Part 2-36 : Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements

MS IEC 60335: Part 2-36: 2003


MS IEC 60335: Part 2-36: 2003

Household and similar electrical appliances - Safety: Part 2-3: Particulars requirements for electric iron

MS IEC 60335: Part 2-3: 2002


MS IEC 60335: Part 2-3: 2006

Safety of household and similar electrical appliances - Safety: Part 2-8 : Particular requirements for shavers, hair clippers and similar appliances

MS IEC 60335: Part 2-8: 2002

Safety of household and similar electrical appliances - Safety:

MS IEC 60335: Part 2-8: 2002

Household and similar electrical appliances – Safety: Part 2-14: Particular requirements for kitchen machines (1st revision)

MS IEC 60335: Part 2-14: 2003

Household and similar electrical appliances – Safety: Part 2-14:

MS IEC 60335: Part 2-14: 2003




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT

MS IEC 60335-2-73:1996 464 295 S ST

MS IEC 60335-2-74:2010 465 296 S ST

MS 1597-2-5:2005 466 S ST

MS 1597-2-6:2003 467 297 S ST

MS IEC 60335-2-25:2007 468 298 S ST

MS 1219-2:2002 Safety of household and similar electrical appliances : Part 2 : Particular requirements for fans 469 299 S ST

MS 1220:2010 470 300 S ST MS 1220:2010

471 301 S ST

MS IEC 60335-2-31:2003 473 302 S ST

MS IEC 60335-2-98:2003 475 303 S ST

MS IEC 60335-2-4:2007 476 304 S ST

Household and similar electrical appliances - Safety: Part 2-73: Particular requirements forfixed immersion heaters

MS IEC 60335: Part 2-73: 1996


MS IEC 60335: Part 2-73: 1996

Household and similar electrical appliances - Safety: Part 2-74 : Particular requirements for portable immersion heaters

MS IEC 60335-2-74:2010


MS IEC 60335: Part 2-74: 2010

HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-5: PARTICULAR REQUIREMENTS FOR DISHWASHERS

MS 1597-2-5:2005

HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCEHousehold and similar electrical appliances - Safety: Part 2-6 : Particular requirements for

stationary cooking ranges, hobs, ovens and similar appliancesMS 1597: Part 2-6: 2003


MS 1597: Part 2-6: 2003

Household and similar electrical appliances - Safety: Part 2-25: Particular requirements for microwave ovens

MS IEC 60335-2-25:2007


MS IEC 60335: Part 2-25: 2007

MS 1219: Part 2: 2002

Safety of household and similar electrical appliances : Part 2 :

MS 1219: Part 2: 2002

PERFORMANCE AND CONSTRUCTION OF ELECTRIC CIRCULATING FANS AND REGULATORS (SECOND REVISION) (IEC 60879:1986, MOD)

MS 1220:2001

Performance and construction of electric circulating MS 1597-2-80:2010

HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-80: PARTICULAR REQUIREMENTS FOR FANS (THIRD REVISION) (IEC 60335-2-80:2008, MOD)

MS 1597-2-80:2010


MS 1597: Part 2-80: 2007

Household and similar electrical appliances - Safety: Part 2-31: Particular requirements for range hoods

MS IEC 60335: Part 2-31: 2003


MS IEC 60335: Part 2-31: 2003

Household and similar electrical appliances - Safety: Part 2-98: Particular requirements for humidifiers

MS IEC 60335: Part 2-98: 2003


MS IEC 60335: Part 2-98: 2003

Household and similar electrical appliances - Safety: Part 2-4: Particular requirements for spin extractors

MS IEC 60335: Part 2-4: 2005


MS IEC 60335: Part 2-4: 2007




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT

MS IEC 60335-2-7:2007 477 305 S ST

MS IEC 60335-2-11:2003 478 306 S ST

MS IEC 60335-2-43:2007 479 307 S ST

MS IEC 60335-2-24:2004 480 308 S ST 2005

MS IEC 60598-2-20:2005 Luminaires: Part 2-20: Particular requirements - Lighting chains 481 309 S ST

MS IEC 60745-1:2010 Hand-held motor-operated electric tools – Safety: Part 1: General requirements 482 310 S ST

MS IEC 60745-2-5:2010 483 311 S ST

MS IEC 60745-2-1:2011 484 312 S ST

MS IEC 60745-2-3:2010 485 313 S ST

MS IEC 60745-2-4:2011 486 314 S ST

MS IEC 60745-2-7:2005 487 315 S ST

HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-7: PARTICULAR REQUIREMENTS FOR WASHING MACHINES (FIRST REVISION) (IEC 60335-2-7:2006, IDT)

MS 1597: Part 2-7: 2005


MS IEC 60335-2-7:2007

Household and similar electrical appliances - Safety: Part 2-11: Particular requirements for tumble dryers (1st revision)

MS IEC 60335: Part 2-11: 2003


MS IEC 60335: Part 2-11: 2003

Household and similar electric appliances - Safety: Part 2-43: Particular requirements for cloths dryers and towel rails

MS 1597: Part 2-43: 2006

Household and similar electric appliances - Safety: Part 2-43:

MS IEC 60335-2-43:2007

Safety of household and similar electrical appliances: Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers

MS IEC 60335-2-24:2004

Safety of household and similar electrical appliances: Part 2-24:

MS IEC 60335: Part 2-24: 2002

MS IEC 60598: Part 2-20: 2005

Luminaires: Part 2-20: Particular requirements - Lighting

MS IEC 60598: Part 2-20: 2005

MS IEC 60745: Part 1: 2005

Hand-held motor-operated electric tools – Safety:

MS IEC 60745: Part 1: 2010

Hand-held motor-operated electric tools-Safety: Part 2-5: Particular requirements for circular saws

MS IEC 60745: Part 2-5: 2003

Hand-held motor-operated electric tools-Safety:

MS IEC 60745: Part 2-5: 2010

Hand-held motor-operated electric tools - Safety: Part 2-1: Particular requirements for drills and impact drills

MS IEC 60745: Part 2-1: 2005

Hand-held motor-operated electric tools - Safety:

MS IEC 60745: Part 2-1: 2011

Safety of handheld motor-operated electric tools: Part 2-3: Particular requirements for grinders, polishers and disk-type sanders

MS IEC 60745: Part 2-3: 2005

Safety of handheld motor-operated electric tools: Part

MS IEC 60745: Part 2-3: 2010

Hand-held motor-operated electric tools - Safety: Part 2-4: Particular requirements for sanders and polishers other than disk type

MS IEC 60745: Part 2-4: 2005


MS IEC 60745: Part 2-4: 2011

Safety of handheld motor-operated electric tools: Part 2-7: Particular requirements for spray guns for non-flammable liquids

MS IEC 60745: Part 2-7: 2005

Safety of handheld motor-operated electric tools: Part

MS IEC 60745: Part 2-7: 2005




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT

MS IEC 60745-2-11:2005 488 316 S ST 2011

MS IEC 60745-2-14:2011 489 317 S ST

MS IEC 60745-2-17:2012 490 318 S ST

MS IEC 60335-2-79:2007 491 319 S ST

MS IEC 60335-2-45:2003 492 320 S ST

MS IEC 60335-2-76:2007 493 321 S ST

MS IEC 60968:2006 494 S ST

MS IEC 60969:2006 495 S ST

MS IEC 62031:2011 LED MODULES FOR GENERAL LIGHTING - SAFETY SPECIFICATIONS (IEC 62031:2008, IDT) 496 S ST

1 Ogos 2010 MS 62115:2008 Electric Toys Safety 497 MS 1725 322 S KPDNKK MS 62115:2008

MS IEC 62560:2012 (P) 498 S ST

MS IEC 60598-1:2006 Luminaires: Part 1: General requirements and test S ST replace to MS IEC

Hand-held motor-operated electric tools -Safety: Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)

MS IEC 60745: Part 2-11: 2005

Hand-held motor-operated electric tools -Safety:

MS IEC 60745: Part 2-11: 2005

Hand-held motor-operated electric tools - Safety: Part 2-14: Particular requirements for planers requirements for planers

MS IEC 60745: Part 2-14: 2006


MS IEC 60745: Part 2-14: 2011

HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-17: PARTICULAR REQUIREMENTS FOR ROUTERS AND TRIMMERS (FIRST REVISION) (IEC 60745-2-17:2010, IDT)S

MS IEC 60745-2-17:2012

HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-17:

MS IEC 60745: Part 2-17: 2005

Household and similar electrical appliances - Safety: Part 2-79: Particular requirements for high pressure cleaners and steam cleaners

MS IEC 60335: Part 2-79: 2007


MS IEC 60335: Part 2-79: 2007

Household and similar electrical appliances - Safety: Part 2-45: Particular requirements for portable heating tools and similar appliances (1st revision)

MS IEC 60335: Part 2-45: 2003


MS IEC 60335: Part 2-45: 2003

Household and similar electrical appliances - safety: Part 2-76: Particular requirements for electric fence energizers

MS IEC 60335: Part 2-76: 2007

Household and similar electrical appliances - safety: Part 2-76:

MS IEC 60335: Part 2-76: 2007

SELF-BALLASTED LAMPS FOR GENERAL LIGHTING SERVICES - SAFETY REQUIREMENTS(IEC 60968:1999, IDT)

SELF-BALLASTED LAMPS FOR GENERAL LIGHTING SERVICES - PERFORMANCE REQUIREMENTS(IEC 60969:2001, IDT)

Safety of Electric Toys

SELF-BALLASTED LED-LAMPS FOR GENERAL LIGHTING SERVICES BY VOLTAGE > 50 V - SAFETY SPECIFICATIONS (IEC 62560:2011, IDT)s

*Refer no. 213

MS IEC 60598: Part 1: 2003

Luminaires: Part 1: General requirements and test

*Refer to 147

MS IEC 60598: Part 1: 2006




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT

MS 60335-2-6:2007 500 324 S ST

MS IEC 60335-2-29:2005 501 325 S ST

MS IEC 60335-2-65:2006

55

S ST S ST

MS IEC 60061-1:2005

55

S ST S ST

MS IEC 60335-2-85:2003

55

S ST

Jun 01, 2011 MS 2024:2006 ELECTRIC RICE COOKER FOR HOUSEHOLD USE - METHOD OF MEASURING THE PERFORMANCE

55

S ST

MS1752:2004

55

S ST

MS IEC 60923:1995

55

S ST

MS IEC 62552:2011

55

S ST

MS 1753:2004

55

S ST

MS IEC 60312-2:2012

55

S ST

HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-6: PARTICULAR REQUIREMENTS FOR STATIONARY COOKING RANGES, HOBS, OVENS AND SIMILAR APPLIANCES (SECOND REVISION)

MS 60335-2-6:2007

HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-6:

MS 60335-2-6:1999

HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-29 : PARTICULAR REQUIREMENTS FOR BATTERY CHARGERS

MS IEC 60335-2-29 : 2005


MS IEC 60335-2-29 : 2005

HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY –PART 2-65: PARTICULAR REQUIREMENTS FOR AIR-CLEANING APPLIANCES (FIRST REVISION) (IEC 60335-2-65:2005, IDT)

LAMP CAPS AND HOLDERS TOGETHER WITH GAUGES FOR THE CONTROL OF INTERCHANGEABILITY AND SAFETY - PART 1: LAMP CAPS (IEC 60061-1:2005, IDT)

HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES – SAFETY –PART 2-85: PARTICULAR REQUIREMENTS FOR FABRIC STEAMER(IEC 60335-2-85:2002, IDT)

ELECTRIC TOASTERS FOR HOUSEHOLD AND SIMILAR PURPOSES - METHODS FOR MEASURING THE PERFORMANCE (IEC 60442:2003, MOD)

AUXILIARIES FOR LAMPS - BALLASTS FOR DISCHARGE LAMPS (EXCLUDING TUBULAR FLUORESCENT LAMPS) - PERFORMANCE REQUIREMENTS (FIRST REVISION) (IEC 60923:2006, IDT)

HOUSEHOLD REFRIGERATING APPLIANCES - CHARACTERISTICS AND TEST METHODS (FIRST REVISION) (IEC 62552:2007, IDT)

ELECTRIC IRONS FOR HOUSEHOLD OR SIMILAR USE - METHODS FOR MEASURING PERFORMANCE (IEC 60311:2002, MOD)

MS IEC 60312-2:2012 Vacuum cleaners for household use - Part 2: Wet cleaning appliances - Methods of measuring the performance (First revision) (IEC 60312-2:2010, IDT)

2 MS under MS 60312




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT

MS IEC 60312-1:2012

55

S ST

MS ISO 5151:2004

55

S ST 2012

MS IEC 62087:2008

55

S ST

MS IEC 62301:2006

55

S ST

MS IEC 62612: 2012(P) Self-ballasted LED-lamps for general lighting services - Performance requirements

55

S ST

MS IEC 60335-2-32:2003

55

S ST

326 S ST

MS IEC 61347-2-8:2003 Lamp controlgear: Part 2-8: Particular requirements for ballast for fluorescent lamps 326 S ST

Information technology equipment – Safety: Part 1: General equipment 502 328 S ST

MS 1875:2006 Penentuan untuk Isi Kacang Tanah Mentah 503 329 U FAMA MS 457 & MS 458 tMS 1875:2006

MS 980:1985 504 W BOMBA

MS ISO/IEC GUIDE 71:2012 506 W BOMBA

MS IEC 60312-1:2012Vacuum cleaners for household use - Part 1: Dry vacuum cleaners - Methods for measuring the performance (First Revision) (IEC 60312-1:2010, IDT)

Non-ducted air conditioners and heat pumps - Testing and rating for performance (First revision) (ISO 5151:2010, IDT)

METHODS OF MEASUREMENT FOR THE POWER CONSUMPTION OF AUDIO, VIDEO AND RELATED EQUIPMENT (IEC 62087:2002, IDT)

Household electrical appliances - Measurement of standby power (First revision) (IEC 62301:2011, IDT)

20072012

HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY -PART 2-32: PARTICULAR REQUIREMENTS FOR MASSAGE APPLIANCES (FIRST REVISION) (IEC 60335-2-32:2002, IDT)

MS IEC 61347-1:2003 Lamp controlgear: Part 1: General and safety requirements *Refer no. 289 & 290

MS 141: PART 1:1993

SPECIFICATION FOR BALLASTS FOR TUBULAR FLUORESC

MS 141: PART 1:1993

*Refer no. 289 & 290

MS 141: PART 1:1993

SPECIFICATION FOR BALLASTS FOR TUBULAR FLUORESCMS IEC 60950: Part 1 :2007 MS IEC

60950: Part 1 :2007

Information technology equipment – Safety: Part 1:

MS IEC 60950: Part 1

MS 457:1976

Penentuan untuk Isi Kacang Tanah

SPECIFICATION FOR SAFETY SIGNS AND COLOURS : COLORIMETRIC AND PHOTOMETRIC PROPERTIES OF MATERIALS

MS 980:1985

SPECIFICATION FOR SAFETY SIGNS AND

GUIDELINES FOR STANDARDS DEVELOPERS TO ADDRESS THE NEEDS OF OLDER PERSONS AND PERSONS WITH DISABILITIES (ISO/IEC GUIDE 71:2001, IDT)

MS ISO/IEC GUIDE 71:2012

GUIDELINES FOR STANDARDS DEVELOPE




Date of Enforcement


No of Mandat

ory Standar

ds




s (MS) refered in

ACT

MS 1723:2003 507 331 Z JAS (Bhgn Udara) MS 1723:2003

MS 1596:2003 508 332 Z JAS (Bhgn Udara) MS 1596:2003

Performance Evaluation of Air Pollution Control & Treatment Systems: Mecghanical Dust Collectors

MS 1723:2003

Performance Evaluation of Air Pollution Control & Determination of Concentration and Mass Flow of Particulate Matter in Flue Gas for

Stationary Source EmissionsMS 1596:2003

ISC NAME Name of Act Contact details

Agriculture

Agriculture

Agriculture

Agriculture

Agriculture

Agriculture

Agriculture

Agriculture

Agriculture

Agriculture

Agriculture

Regulation / By-Laws

Directive/ Circulars/ Guideline

Federal Agricultural Marketing Authority Act 1965 (Revised 1974) [Act 141]

Federal Agricultural Marketing Authority (Grading, Packaging And Labelling Of Agricultural Produce) Regulations 2008

Pn. Norhayati Hj Maulud,Bahagian Undang UndangEmel:[email protected] Tel: 03-61264000 ext 4127Faks: 03-61374766



Pn. Norhayati Hj MauludEmel:[email protected] Tel: 03-61264000 ext 4127Faks: 03-61374767

Federal Agricultural Marketing Authority Act 1965 (Revised 1974) [Act 141



























ISC NAME Name of Act Contact detailsRegulation / By-Laws


Agriculture

Agriculture

Agriculture

Agriculture

Agriculture

Agriculture

Agriculture

Agriculture

Agriculture

Agriculture

Agriculture




































Agriculture

Agriculture

Agriculture

Agriculture

Agriculture

Agriculture

Agriculture

Agriculture

Agriculture

Agriculture

Agriculture




































Agriculture Food Regulations 1985

Agriculture

Food Act 1983 [Act 281]

Pn. Norma OsmanEmel:[email protected]: 03-88703447Faks: 03-88887639

Malaysian Palm Oil Board Act 1998 [Act 582]

Peraturan-Peraturan Lembaga Minyak Sawit Malaysia (Perlesenan) 2005

Syarat-Syarat Bagi Pemegang Lesen Dalam Kategori Pengeluar Biji Benih Kelapa Sawit (NS)

Pn. Zalena Abu HasanEmel:[email protected]: 03-78002977Faks: 03-78034014



Chemicals and Materials Consumer Protection Act 1999 [Act 599]





Akta Lembaga Koko Malaysia (Pemerbadanan) 1998

Peraturan-Peraturan Lembaga Koko Malaysia 2012

Prosedur Pensijilan Kualiti Koko

Akta Lembaga Koko Malaysia (Pemerbadanan) 1998

Peraturan-Peraturan Lembaga Koko Malaysia 2012

Prosedur Pensijilan Kualiti Koko

Consumer Protection (Safety Standards For Toys) (Amendment) Regulations 2011

Pn Thiagaletchumi V. ManiamEmel: [email protected]: 03-8882 5862Faks: 03-88826960













Food (Amendment)(No 3) Regulations 2012

Customs Act 1967 [Act 235]


Uniform Building By-Laws 1984 (G.N. 5178/84)









Muhammad Izwan AhmadEmel: [email protected]: 03-8883 3507Faks: 03-8889 3815

Customs (Prohibition of Imports) (No 3) Order 2011Incorporating [P.U.(A) 86/2008]

En. Farid Mohd SahatEmel: [email protected]: 03-62034710Faks:03-62033137



Building, Construction and Civil Engineering

Street, Drainage and Building Act 1974 [Act 133]

Pn.Aminah Abd. RahmanEmel:[email protected]: 03-20874501Faks: 03-20953717































































Street, Drainage and Building Act 1974[Act 133]

Uniform Building By-Laws 1984 (Amendment 1991) Inserting new By-Law 34(A)By-Law 34(A)(2)

Pn. Aminah Abd. RahmanEmel:[email protected]: 03-20874501Faks: 03-20953717

En. Fadzli ZubiEmel:[email protected]: 03-26989211Faks: 03-26933964


Garis Panduan dan Piawaian Perancangan-Kemudahan Golongan Orang Kurang Upaya (Jbtn. Perancangan Bandar & Desa Semenanjung Malaysia)




Akta Lembaga Pembangunan Industri Pembinaan Malaysia (Pindaan)2011

Tuan Haji Razuki Hj. IbrahimEmel: [email protected]: 03-26170348Fax 03-40451808


































































































































Perintah Kastam (Larangan Mengenai Import) (Pindaan) (No.3) 2013







Electricity Supply Act 1990 [Act 447]




Generation, Transmission and Distribution of Energy

Approval of Electrical EquipmentElectricity Regulations 1994 - P.U.(A) 38/94;[Am: P.U.(A) 290/94, P.U.(A) 40/95, P.U.(A) 192/98, P.U.(A) 397/99, P.U.(A) 431/2003]

ST DirectiveInformation Booklet 2009 Edition

Ir. Amir HassanEmel:[email protected]: 03-88708605Faks: 03-88888652





































































































































Electricity Supply Act 1990 [Act 447] ST(IP) PE/11/12/1( )

Electricity Supply Act 1990 [Act 447] ST(IP) PE/11/12/1( )






















Electricity Supply (Electrical Product And Appliance Safety) Regulations 2008

Pn. Fairus Abd. ManafEmel:[email protected]: 03-88708607Faks: 03-88888652












Communications And Multimedia Act 1998 [Act 588]

Customs (Prohibition of Imports) Order 2008 Incorporating latest amendment [P.U.(A) 34/2010]

En. Mohamad Nazir OsmanEmel:[email protected]: 03-86888247Faks: 03-86881005























ST(lP/KKE) 16/1 (3)

ST(lP) PE/11/2/1( )




ST(lP/KKE) 16/1 (3)

ST(lP) PE/11/2/1( )




ST(lP/KKE) 16/1 (3)

ST(lP) PE/11/2/1( )

















ST(lP/KKE) 16/1 (3)

ST(lP) PE/11/2/1( )




ST(lP/KKE) 16/1 (3)

ST(lP) PE/11/2/1( )




ST(lP/KKE) 16/1 (3)

ST(lP) PE/11/2/1( )




ST(lP/KKE) 16/1 (3)

ST(lP) PE/11/2/1( )




ST(lP/KKE) 16/1 (3)

ST(lP) PE/11/2/1( )




ST(lP/KKE) 16/1 (3)

ST(lP) PE/11/2/1( )




ST(lP/KKE) 16/1 (3)

ST(lP) PE/11/2/1( )




ST(lP/KKE) 16/1 (3)

ST(lP) PE/11/2/1( )




ST(lP/KKE) 16/1 (3)

ST(lP) PE/11/2/1( )




ST(lP/KKE) 16/1 (3)

ST(lP) PE/11/2/1( )




ST(lP/KKE) 16/1 (3)

ST(lP) PE/11/2/1( )






Electricity Supply Act 1990 [Act 447] ST(lP/KKE) 16/1 (3)









ST(lP/KKE) 16/1 (3)

ST(lP) PE/11/2/1( )




ST(lP/KKE) 16/1 (3)

ST(lP) PE/11/2/1( )













ST(lP/KKE) 16/1 (3)

ST(lP) PE/11/2/1( )




ST(lP/KKE) 16/1 (3)

ST(lP) PE/11/2/1( )




ST(lP/KKE) 16/1 (3)

ST(lP) PE/11/2/1( )









Electricity Supply Act 1990 [Act 447] ST/IP/PK/JKKE/Pk 03/2011




Mechanical Engineering


















Mechanical Engineering Customs Act 1967 [Act 235]



Mechanical Engineering Trade Descriptions Act 1972 [Act 87]




Buku Tatacara Mengimport Produk Bahan Binaan CIDB (Website CIDB)






Trade Description (Making of Non-Pressure Kerosene Stove) Order 1991


FACTORIES AND MACHINERY ACT 1967 (REVISED - 1974) Act 139

Mohd Fazli B. Masri,Email :[email protected] : 012-7964645/ 03-8886 5686Fax : 03-8889 2352



Petroleum and Gas Environmental Quality Act 1974 [Act 127]

Petroleum and Gas Environmental Quality Act 1974 [Act 127]

Petroleum and Gas Customs Act 1967 [Act 235]

Petroleum and Gas Road Transport Act 1987 [Act 333]

Petroleum and Gas Uniform Building By-Laws 1984 (G.N. 5178/84) Arahan Tetap Bomba

Act 302

Act 302

FACTORIES AND MACHINERY ACT 1967 (REVISED - 1974) Act 139


Environmental Quality (Control Of Lead Concentration In Motor Gasoline) Regulations 1985 - P.U.(A) 296/85;

Pn. Nor Rashidah Mohd GhazaliEmel:[email protected]: 03-88712326Faks: 03-88884151





Motor Vehicles (Construction, equipment and use) (use of Liquefied Petroleum Gas Fuel System in Motor Vehicles) Rules 1982

En. Sharulnizam SaripEmel:[email protected]: 03-88866702Faks: 03-88905950


Fire Services Act 1988

En. Nordin PauziEmel:[email protected]: 03-83185444/ 019-2217006Faks: 03-83195244



Road Vehicles Road Transport Act 1987 [Act 333] Motorcycles (Safety Helmets) Rules , 1973

Road Vehicles Road Transport Act 1987 [Act 333]


Road Vehicles Road Transport Act 1987 [Act 333] Motor Vehicles (Construction and Use) Rules 1959




Motor Vehicles (Safety Seat-Belts) Rules 1978. P.U.(A) 378/1978



















Road Vehicles Trade Descriptions Act 2011 [Act 730]









Kaedah-kaedah Kenderaan Motor (Pembinaan & Penggunaan) (Pindaan) 2011




Trade Description (Marking of Replacement Part of Brake Lining) Order 2013

Shamala Devi [email protected]: 03-88825850Faks: 03-88826960




Fire Safety and Prevention

Fire Safety and Prevention Uniform Building By-Laws 1984 (G.N. 5178/84) Arahan Tetap Bomba






























Street, Drainage and Building Act 1974Act [133]



Street, Drainage and Building Act 1974Act [133]



















Metallic Materials and Semi-finished Products



















































































































Ir. Mukhtar Che AliEmel:[email protected]: 03-26170359Faks: 03-40451808

































































Medical Devices and Facilities for Healthcare



Electrical and Electronic Equipments and Accessories



























































































































































































Approval of Electrical EquipmentElectricity (Amendment) Regulations 2013- P.U.(A) 38/94;[Am: P.U.(A) 290/94, P.U.(A) 40/95, P.U.(A) 192/98, P.U.(A) 397/99, P.U.(A) 431/2003]



















































































Electricity Supply Act 1990 [Act 447] ST (IP/KKE) 16/2/1(11)

Consumer Protection Act 1999 [Act 599]

























Electricity (Amendment) Regulations 2013




















Electrical and Electronics Equipments and Accessories




















Approval of Electrical EquipmentElectricity (Amendment) Regulations 2013 - P.U.(A) 38/94;[Am: P.U.(A) 290/94, P.U.(A) 40/95, P.U.(A) 192/98, P.U.(A) 397/99, P.U.(A) 431/2003]


Approval of Electrical EquipmentElectricity (Amendment) Regulations 2013 - P.U.(A) 38/94;[Am: P.U.(A) 290/94, P.U.(A) 40/95, P.U.(A) 192/98, P.U.(A) 397/99, P.U.(A) 431/2003]


Approval of Electrical EquipmentElectricity (Amendment) Regulations 2013- P.U.(A) 38/94;[Am: P.U.(A) 290/94, P.U.(A) 40/95, P.U.(A) 192/98, P.U.(A) 397/99, P.U.(A) 431/2003]








Customs (Prohibition of Imports) Order 2008

Incorporating latest amendment [P.U.(A) 34/2010]



Federal Agricultural Marketing Authority (Grading, Packaging And Labelling Of Agricultural

Produce) Regulations 2008



Environmental Quality Act 1974 [Act 127]


Environmental Management

Environmental Quality (Clean Air) Regulations 1978 - P.U.(A) 280/78


Environmental Management



LIST OF MANDATORY STANDARDS AS OF 10 FEB 2012

ISC Name of Act

Current Malaysian Standards (MS) Remark Regulator

No. MS No. Title of MS Agency Contact details

A

Agr

icul

ture

April

200

9

1 MS 1230:2010 FAMA

2 MS 894:1984 Fresh Chillies-Specification (1st revision)

3 MS 1124:1996

4 MS 1306:2005

5 MS 1252:2009 Fresh French Beans-Specification (1st revision)6 MS 951:2003 Spesifikasi bagi Kacang Panjang (2nd revision)

7 MS 1324:1993 Specification for Fresh Kale (kailan)8 MS 892:2004 Spesifikasi bagi Kobis Bulat (2nd revision)

9 MS 1393:1996 Specification for Fresh Chinese Cabbage (Head Type)

10 MS 1146:1989 Specification for Fresh Bitter Gourd11 MS 1361:1994 Specification for Fresh Head Lettuce12 MS 1323:2008 Fresh Mustards-Specification (1st revision)13 MS 1362:1994 Specification for Fresh Spinach14 MS 956:2003 Spesifikasi bagi Timun (2nd revision)15 MS 893:2010 Spesifikasi bagi Tomato (2nd revision)16 MS 1127:2002 Specification for Fresh Carambola (2nd revision)

17 MS 1040:1986 Specification for Fresh Papaya18 MS 1145:2003 Specification for Fresh Eksotika Papaya (1st revision)

19 MS 1149:1989 Specification for Fresh Guava20 MS 232:1974 Specification for Malaysian Mandarins for Fresh-Fruit Consumption

21 MS 885:1984

A

Agric

ultu

re

April

200

9

22 MS 1128:1989 Specification for Quick Frozen Mangosteen FAMA

23 MS 1055:1986 Specification for Fresh Jackfruit FAMA24 MS 459:1976 Specification for Fresh Bananas FAMA25 MS 1075:1987 Export Specification for Fresh ‘Mas’ Bananas FAMA

26 MS 1028:2005 Fresh Watermelon - Specification (1st revision) FAMA



Date of Enforce

ment



Fresh Lady’s Finger (Okra)-Specification (1st revision) Pn. Norhayati Hj MauludEmel:[email protected] Tel: 03-61264000 ext 4127Faks: 03-61374766Replaced

by MS 894:2005-Fresh Chillies-Specification (1st revision)

Specification for Fresh Sweet Pepper (Bell Pepper) (1st revision)

Fresh Ginger-Specification (1st revision)

Specification for the Grading of Mangoes for Fresh-Fruit Consumption





ISC Name of Act

Current Malaysian Standards (MS) Remark Regulator




Date of Enforce

ment

A

Agric

ultu

re

April

200

9

27 MS 1325:1993 Specification for Fresh Muskmelon (Tembikai Wangi) FAMA

28 MS 1354:1994 Specification for Fresh Cut Chrysanthemum (Multi-Floral) FAMA

29 MS 1280:1992 Specification for Fresh Orchid Cut Flowers (Spray Type) FAMA

30 MS 1233:1991 Specification for Fresh Cut Roses (Unifloral Type) FAMA

31 MS 1355:1994 Specification for Fresh Cut Roses (Multi-Floral) FAMA

32 MS 1281:1992 Specification for Fresh Cut Carnations (Unifloral) FAMA

33 MS 1353:1994 Specification for Fresh Cut Carnations (Multi-Floral) FAMA

Food Regulations 1985

1 Ja

nuar

i 201

1

34 MS 1529:2001 DOA

MS 1529:2001 MOH

35 MS 157:2005 Oil Palm Seeds for Commercial Planting - Specification MPOB






Pn. Norma OsmanEmel:[email protected]: 03-88703447Faks: 03-88887639

*Refer no. 34


Pn. Shamsinar Abdul TalibEmel:[email protected]: 03-88850787Faks: 03-88893815

Malaysian Palm Oil Board Act 1998 [Act 582]

Peraturan-Peraturan Lembaga Minyak Sawit Malaysia (Perlesenan) 2005

Syarat-Syarat Bagi Pemegang Lesen Dalam Kategori Pengeluar Biji Benih Kelapa Sawit (NS)

Pn. Zalena Abu HasanEmel:[email protected]: 03-78002977Faks: 03-78034014

LIST OF MANDATORY STANDARDS AS OF 10 FEB 2012ISC Name of Act Current Malaysian Standards (MS) Remark Regulator


B

Chem

ical

s an

d M

ater

ials

1 O

gos

2010

36 MS ISO 8124: Part 1: 2001 Safety of Toys - Part 1: Safety Aspects Related to Mechanical and Physical Properties

KPDNKK

37 MS ISO 8124: Part 1: 2011 Safety of Toys - Part 1: Safety Aspects Related to Mechanical and Physical Properties

38 MS ISO 8124: Part 2:2008

39 MS ISO 8124: Part 3: 2002 Safety of Toys - Part 3: Migration of Certain Elements

1 O

gos

2010

40 MS 1774: Part 4: 1998 Safety of Toys - Part 4: Experimental Sets for Chemistry and Related Activities

41 MS 1774: Part 5: 1998 Safety of Toys - Part 5: Chemical Toys (Sets) Other Than Experimental Sets

42 MS 1774: Part 6: 1998 Safety of Toys - Part 6: Graphical Symbol for Age Warning Labelling

43 MS 1848:2005 ALUMINIUM AND ALUMINIUM ALLOYS - FOILS

MITI

44 MS 2040:2007



Date of

Enforcement




SAFETY OF TOYS - PART 1: SAFETY ASPECTS RELATED TO MECHANICAL AND PHYSICAL PROPERTIES (FIRST REVISION) (ISO 8124-1:2009, IDT)




ALUMINIUM AND ALUMINIUM ALLOYS - SHEETS AND COILED SHEETS - SPECIFICATION


ISC Name of ActCurrent Malaysian Standards (MS)

RemarkRegulator


D

Build

ing,

Con

stru

ction

and

Civ

il En

gine

erin

g

45 MS 544: Part1: 2001 Code of Practice for Structural Use of Timber: Part 1: General (1st revision)

JKT, KPKT

46 MS 544: Part 2: 2001

47 MS 544: Part 3: 2001

48 MS 544: Part 4: Section 1: 2001

49 MS 544: Part 4: Section 2: 2001

50 MS 544: Part 4: Section 3: 2001

51 MS 544: Part 4: Section 4: 2001

52 MS 544: Part 5: 2001 Code of Practice for Structural Use of Timber: Part 5: Timber Joints53 MS 544: Part 6: 2001

54 MS 544: Part 7: 2001 Code of Practice for Structural Use of Timber: Part 7: Testing (1st revision)

55 MS 544: Part 9: Section 1: 2001



Date of Enforce

ment


Uniform Building By-Laws 1984

(G.N. 5178/84)


Code of Practice for Structural Use of Timber: Part 2: Permissible Stress Design of Solid Timber (1st revision)

Code of Practice for Structural Use of Timber: Part 3: Permissible Stress Design of Glued Laminated Timber

Code of Practice for Structural Use of Timber: Part 4: Timber Panel Products: Section 1: Structural Plywood

Code of Practice for Structural Use of Timber: Part 4: Timber Panel Products: Section 2: Marine Plywood

Code of Practice for Structural Use of Timber: Part 4: Timber Panel Products: Section 3: Cement Bonded Particle Board (CBP)

Code of Practice for Structural Use of Timber: Part 4: Timber Panel Products: Section 4: Oriented Strand Board (OSB)

Code of Practice for Structural Use of Timber: Part 6: Workmanship, Inspection and Maintenance (1st revision)




RemarkRegulator




Date of Enforce

ment

56 MS 544: Part 10: 2003

JKT, KPKT

57 MS 544: Part 11: Section 1: 2001

58 MS 544: Part 11: Section 2: 2001

59 MS 544: Part 11: Section 3: 2001

60 MS 544: Part 12: 2006

61 MS 76: 1972

BOMBA

62 MS 1184:2002 Code of practice for access of disabled people to public buildings



Code of Practice for Structural Use of Timber: Part 10: Preservative Treatment of Structural Timber


Code of Practice for Structural Use of Timber: Part 11: Recommended Span Tables and Their Calculations: Section 1: Domestic Floor Joists

Code of Practice for Structural Use of Timber: Part 11: Recommended Span Tables and Their Calculations: Section 2: Ceiling Joists

Code of Practice for Structural Use of Timber: Part 11: Recommended Span Tables and Their Calculations: Section 3: Ceiling Binders

Code of Practice for Structural Use of Timber: Part 12: Laminated Veneer Lumber for Structural Application



Arahan Tetap Bomba

Specification for bricks and blocks of fired brick-earth, clay or shale: Part 2: Metric Units

Tajuk ada Part 2 kerana adopted dari Part 2 standard luar




Jbtn. Perancangan Bandar & Desa Semenanjung Malaysia





RemarkRegulator




Date of Enforce

ment

D

63 MS 1331:2003 Code of Practice for Access of Disabled Persons Outside Building

Build

ing,

Con

stru

ction

and

Civ

il En

gine

erin

g

2/12

64 MS 888: 2011 White Portland cement

CIDB

65 MS 795:2002 Specification for WC Flushing Cisterns and Flush pipes (1st revision)

66

67

68

69

Garis Panduan dan Piawaian Perancangan-Kemudahan Golongan Orang Kurang Upaya (Jbtn. Perancangan Bandar & Desa Semenanjung Malaysia)





Tuan Haji Razuki Hj. IbrahimEmel: [email protected]

Tel: 03-26170348Fax 03-40451808











RemarkRegulator




Date of Enforce

ment

Build

ing,

Con

stru

ction

and

Civ

il En

gine

erin

g

Febr

uary

-04

70

CIDB

71

72

73

74 MS 1017 : PART 1 : 1986

75

76 MS 1314 : PART 1 : 2004

77 MS 1314 : PART 2 : 2004

Febr

uary

-04

78 MS 1314 : PART 3 : 2004


Tel: 03-26170348Fax 03-40451808


















RemarkRegulator




Date of Enforce

ment

Build

ing,

Con

stru

ction

and

Civ

il En

gine

erin

g

Febr

uary

-04

79 MS 1314 : PART 4 : 2004

CIDB



Tel: 03-26170348Fax 03-40451808




RemarkRegulator




Date of Enforce

ment

D

Build

ing,

Con

stru

ction

and

Civ

il En

gine

erin

g

Febr

uary

-04

80 MS 1314 : PART 5 : 2004

CIDB

81 MS 1314 : PART 6 : 2004

82 MS 795-1:2011 WC FLUSHING CISTERNS - PART 1 : SPECIFICATION (SECOND REVISION)

83 MS 795-2:2011 WC FLUSHING CICTERNS - PART 2:INLET VALVES (SECOND REVISION)

84 MS 795-3:2011 WC FLUSHING CICTERNS - PART 3: FLUSHING DEVICE (SECOND REVISION)

85 MS 822 : 1983 (CONFIRMED:2004) SPECIFICATION FOR SAWN-TIMBER FOUNDATION PILES

86 MS 1061 : PART 2 : 1999

87 MS 1037:1986 Sulphate-resisting Portland cement

MS EN 197-1:2007

90 MS ISO 13006:2003 Ceramic Tiles - Definitions, Classification, Characteristic and Marking

91 MS 147:2001 Specification for Quality of Vitreous China Sanitary Appliances (1st revision)

92 MS 1522:2011 Specification for Vitreous China Water Closet Pans (1st revision)




Tel: 03-26170348Fax 03-40451808



88

89

MS EN 197-1:2007,

MS EN 197-2:2007



MS 1227, MS 1389, MS 1520

& MS 1388 telah digabung

menjadi MS EN 197 Part 1

& 2

*Refer no. 88




RemarkRegulator


E

93 MS 1578:2003 68

ST

94 MS 589-1:2011

95 MS 1577:2003

96 MS 589-3:1998

97 MS 1144:1998 General requirements for electric accessories (1st revision)

98

99

100

101

102

103

104

ST

105

106

107 MS 589-2:2011

108 MS 1579:2003

109

110

111

112 MS 770:1982 Specification for ceiling roses

113 Glow-starters for fluorescent lamps

114

115

116



Generation, Transmissio

n and Distribution

of Energy


Approval of Electrical Equipment

Electricity Regulations 1994 - P.U.(A) 38/94;[Am: P.U.(A) 290/94, P.U.(A) 40/95, P.U.(A)

192/98, P.U.(A) 397/99, P.U.(A) 431/2003]

ST DirectiveInformation

Booklet 2009 Edition




Specification for 15A plugs and socket-outlets for domestic and similar purposes

Specification for 13A plugs, socket-outlets, adaptors and connection units: Part 3: Specification for adaptors

MS IEC 60998-1:2005

Connecting devices for low-voltage circuits for household and similar purposes: Part 1: General requirements

MS IEC 60998-2-1:2005

Connecting devices for low-voltage circuits for household and similar purposes: Part 2-1: Particular requirements for connecting devices as separate entities with screw - type clamping

MS IEC 60998-2-3:2005

Connecting devices for low-voltage circuits for household and similar purposes: Part 2-3: Particular requirements for connecting devices as separate entities with insulation-piercing clamping units

MS IEC 60998-2-4:2005

Connecting devices for low-voltage circuits for household and similar purposes: Part 2-4: Particular requirements for twist-on connecting devices

MS IEC 60998-2-5:2005

Connecting devices for low-voltage circuits for household and similar purposes: Part 2-5: Particular requirements for connecting boxes (junction and/or tapping) for terminals or connecting devices

MS IEC 60669-1:2004

Switches for household and similar fixed electrical installations: Part 1: General requirements

MS IEC 60669-2-1:2004

Switches for household and similar fixed electrical installations: Part 2-1: Particular requirements – Electronic switches


MS IEC 60669-2-2:2004

Switches for household and similar fixed electrical installations: Part 2-2: Particular requirements – Remote control switches (RCS)

MS IEC 60669-2-3:2004

Switches for household and similar fixed electrical installations: Part 2-3: Particular requirements – Time delay switches (TDS)

Specification for 13A plugs, socket-outlets, adaptors and connection units: Part 2: Specification for 13A switched and unswitched socket-outlet (1st revision)

Specification for portable 2 pin socket-outlets for class II equipment for household and similar purposes

MS IEC 61558-1:2005

Safety of power transformers, power supply units and similar: Part 1: General requirements and tests

MS IEC 61558-2-5:2005

Safety of power transformers, power supply units and similar: Part 2-5: Particular requirements for shaver transfomers and shaver supply units

MS IEC 61558-2-6:2005

Safety of power transformers, power supply units and similar: Part 2-6: Particular requirements for safety isolating transformers for general use

MS IEC 60155:1996




192/98, P.U.(A) 397/99, P.U.(A) 431/2003]

ST DirectiveInformation

Booklet 2009 Edition

MS IEC 61008-1: 2007

Residual current operated circuit-breaker without integral overcurrent protection for household and similar uses (RCCBs): Part 1: General rules (1st revision)

MS IEC 61008-2-1:2003

Residual current operated circuit-breaker without integral overcurrent protection for household and similar uses (RCCB’s): Part 2-1: Applicability of the general rules to RCCB’s functionally independent of line voltage

MS IEC 61008-2-2:2003

Residual current operated circuit-breaker without integral overcurrent protection for household and similar uses (RCCB’s): Part 2-2: Applicability of the general rules to RCCB’s functionally dependent on line voltage



RemarkRegulator




E

117

118

119

120

121

122 Low-voltage fuses: Part 1: General requirements

123

124

125

ST

126

127

128 MS 140:1987 Specification for insulated flexible cords and cables (1st revision)

129 MS 136:1995

130 MS 1936:2007 Electrical installations of buildings - Guide to MS IEC 60364

131 MS 1979:2007 Electrical installations of buildings - Code of Practice

132

SKMM

133 MS 406:1996

134 IEC standard voltages

135

MS 1578:2003

MS 589-1:2011


n and Distribution

of Energy

MS IEC 61009-1:2003

Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs): Part 1: General rules

Replaced by MS IEC 61009: Part 1: 2005

MS IEC 61009-2-1:2003

Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs): Part 2-1: Applicability of the general rules to RCBO’s functionally independent of line voltage

MS IEC 61009-2-2:2003

Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs): Part 2-2: Applicability of the general rules to RCBOs functionally dependent of line voltage

MS IEC 60898-1:2007

Electrical accessories - Circuit-breaker for overcurrent protection for household and similar installation: Part 1: Circuit-breaker for a.c operation


MS IEC 60898-2: 2007

Circuit-breakers for overcurrent protection for household ans similar installation: Part 2: Circuit-breaker for a.c and d.s. operation


MS IEC 60269-1:2011


MS IEC 60269-2-1:2011

Low-voltage fuses: Part 2-1: Supplementary requirements for fuses for use by authorized person (Fuses mainly for industrial application) – Section I to IV: Examples of types of standardised fuses

MS 1586-3:2003 Low-voltage fuses: Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications)




MS IEC 60269-3-1:2006

Low-volatge fuses: Part 3-1: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) Section I to IV

Replaced by MS IEC 60269: Part 3-1: 2006


MS IEC 60947-1:2010

Low-voltage switchgear and controlgear: Part 1: General rules Replaced by MS IEC 60947: Part 1: 2004

MS IEC 60947-3:2000

Low-voltage switchgear and controgear: Part 3: Switches, disconnectors, switch-disconnectors and fuse combination units


Specification for PVC insulated cables (non armoured) for electric power and lighting (2nd revision)


ST(IP) PE/11/12/1( )

Replaced by MS 1936:2007




MS CISPR 22:2009

Information Technology Equipment - Radio disturbance characteristics - Limits and methods of measurement


Specification for voltages and frequency for alternating current transmission and distribution systems

MS IEC 60038:2006

MS IEC 61643-1:2006

Surge protective devices connected to low-voltage power distribution systems -Part 1: Performance requirements and testing methods

*Refer no. 93 Specification for flat non-rewirable two-pole plugs, 2.5A. 250 V

with cord for connection of Class II – Equipment for household and similar purposes

*Refer no. 94 Specification for 13A plugs, socket-outlets, adaptors and

connection units: Part 1: Specification for rewirable and non-rewirable 13A plugs (1st revision)



RemarkRegulator




E

MS 1577:2003SKMM

MS 140:1987 Specification for insulated flexible cords and cables (1st revision)

136

ST

137

138 Confirmed: 2002

139

140

141

142 Confirmed: 2002

143

144

145

146

147 Confirmed: 2002

148 Confirmed: 2002

149

150

151

152

153

154

155


n and Distribution

of Energy


Electricity Supply (Electrical Product And

Appliance Safety) Regulations 2008

ST(lP/KKE) 16/1 (3)

ST(lP) PE/11/2/1( )

*Refer no. 95 Specification for 13A plugs, socket-outlets, adaptors and

connection units: Part 1: Specification for rewirable and non-rewirable 13A plugs (1st revision)


*Refer no. 128

MS IEC 60364-1:2007

Low-Voltage Electrical Installations: Part 1: Fundamental Principles, Assessment of General Characteristics, Definitions (2nd revision)


MS IEC 60364-4-41:2007

Low-Voltage Electrical Installations: Part 4-41: Protection for Safety - Protection Against Electrical Shock

MS IEC 60364-7:Section 703:1996

Electrical Installations of Buildings: Part 7: Requirements for Special Installations or Locations: Section 703: Locations Containing Sauna Heaters

MS IEC 60364-7-712:2007

Electrical Installations of Buildings: Part 7-712: Requirements for Special Installations or Locations - Solar Photovoltaic (PV) Power Supply Systems

MS IEC 60364-7-708:1996

Electrical Installations of Buildings: Part 7: Requirements for Special Installations or Locations: Section 708: Electrical Installations in Caravan Parks and Caravans

MS IEC 60364-5-55:2003

Electrical Installations of Buildings: Part 5: Selection and Erection of Electrical Equipment: Chapter 55: Other Equipment: Section 551: Low Voltage Generating Sets

MS IEC 60364-7-705:1996

Electrical installations of Buildings: Part 7: Requirements for Special Installations or Locations-Section 705: Electrical Installations of Agricultural and Horticultural Premises

MS IEC 60364-7-706:1996

Electrical Installations of Buildings: Part 7: Requirements for Special Installations or Locations: Section 706: Restrictive Conducting Locations

ST(lP/KKE) 16/1 (3)

ST(lP) PE/11/2/1( )

MS IEC 60364-7-702:2003

Electrical Installations of Buildings: Part 7: Requirements for Special Installations or Locations: Section 702: Swimming Pools and Other Basins

Pn. Fairus Abd. Manaf

Emel:[email protected]

Tel: 03-88708607Faks: 03-88888652

ST(lP/KKE) 16/1 (3)

ST(lP) PE/11/2/1( )

*Refer no. 141 MS IEC 60364-5-

55:2003Electrical Installations of Buildings: Part 5-55: Selection and Erection of Electrical Equipment-Other Equipment

MS IEC 60364-5-52:2003

Electrical Installations of Buildings: Part 5-52: Selection and Erection of Electrical Equipment-Wiring Systems

MS IEC 60364-4-43:2003

Electrical Installations of Buildings: Part 4-43: Protection for Safety - Protection Against Overcurrent

ST(lP/KKE) 16/1 (3)

ST(lP) PE/11/2/1( )

MS IEC 60364-7-709:1996

Electrical Installations of Buildings: Part 7: Requirements for Special Installations or Locations: Section 709: Marinas and Pleasure Craft

MS IEC 60364-7-707:1996

Electrical Installations of Buildings: Part 7: Requirements for Special Installations or Locations: Section 707: Earthing Requirements for the Installations of Data Processing Equipment

MS IEC 60364-7-704:2003

Electrical Installations of Buildings: Part 7: Requirements for Special Installations or Locations: Section 704: Construction and Demolition Site Installations

ST(lP/KKE) 16/1 (3)

MS IEC 60364-5-53:2003

Electrical Installations of Buildings: Part 5-53: Selection and Erection of Electrical Equipment-Isolation, Switching and Control

MS IEC 60364-4-42:2003

Electrical Installations of Buildings: Part 4-42: Protection for Safety-Protection Against Thermal Effects

MS IEC 60364-6-61:2003

Electrical Installations of Buildings: Part 6-61: Verification-Initial Verification

ST(lP/KKE) 16/1 (3)

ST(lP) PE/11/2/1( )

MS IEC 60364-5-54:2004

Electrical Installations of Buildings: Part 5-54: Selection and Erection of Electrical Equipment-Earthing Arrangements, Protective Conductors and Protective Bonding Conductors

MS IEC 60364-4-44:2007

Electrical Installations of Buildings: Part 4-44: Protection for Safety-Protection Against Voltage Disturbances and Electromagnetic Disturbances

MS IEC 60364-5-51:2007

Electrical Installation of Buildings: Part 5-51: Selection and Erection of Electrical Equipment-Common Rules (2nd revision)



RemarkRegulator




E

156

ST

157

158

159

160

161 Luminaires: Part 1: General requirements and test BOMBA


n and Distribution

of Energy




192/98, P.U.(A) 397/99, P.U.(A) 431/2003]


MS IEC 60320-2-2:2003

Appliances couplers for household and similar general purposes: Part 2-2: Interconnection couplers for household and similar equipment


Emel:[email protected]

Tel: 03-88708607Faks: 03-88888652

Electricity Supply (Electrical Product And

Appliance Safety) Regulations 2008

ST/IP/PK/JKKE/Pk 03/2011

MS IEC 62305-1:2007

Protection Against Lightining - Part 1:General Principles (First Revision)

Pekeliling 03/2011 (New) from ST

MS IEC 62305-2:2008

Protection Against Lightining - Part 2:Risk Management (First Revision)

MS IEC 62305-3:2009

Protection Against Lightining -Part 3:Physical Damage to Structures and Life Hazard (First Revision)

MS IEC 62305-4:2010

Protection Against Lightining - Part 4:Electrical and Electronic Systems within Structures (First Revision)




Arahan Tetap Bomba

MS IEC 60598-1:2006




RemarkRegulator


F

162 MS 1462:1999 Steel Frame scaffoldingsCIDB

163 MS ISO 4344:2004 Steel wire ropes for lifts - Minimum requirements

164 MS 1968:2007

MITI

165 MS 1919:2006

166 MS ISO 2408:2004

167 MS 971:1985 KPDNKK

168 MS 2021-1:2006

DOSH169 MS 1803:2008 CRANES - SAFETY - TOWER CRANES




Akta Lembaga Pembangunan Industri Pembinaan Malaysia

(Pindaan)2011


Customs Act 1967 [Act 235] Customs

(Prohibition of Imports) Order 2008 Incorporating latest amendment [P.U.(A) 34/2010]

Buku Tatacara Mengimport Produk Bahan Binaan CIDB (Website CIDB)

Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions



Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods


Steel wire ropes for general purposes - Minimum requirements

Trade Descriptions Act 1972 [Act 87]

Trade Description (Making of Non-Pressure Kerosene Stove) Order 1991

Specification for Non-pressure kerosene stoves for domestic use


FACTORIES AND MACHINERY ACT 1967 (REVISED - 1974) Act

139

Safety rules for the construction and installation - Part 1: Electric lift)




RemarkRegulator


H

170

6

171MS 912:2008

172

MS ISO 3183 MITI

173

MS 775:2005 JPJ

174MS 830 :2003

BOMBA175MS 930:2010

MS 930:1986 DOSH

MS 830 :2003



Petroleum and Gas



MS 118-2:2005, AMD. 1:2009

Specification for Motor vehicle gasoline : Part 2 : Unleaded gasoline JAS (Bhgn

Udara)

Pn. Nor Rashidah Mohd Ghazali

Emel:[email protected]: 03-88712326

Faks: 03-88884151 Method of test for lead in gasoline (iodine monochloride method)



Petroleum and natural gas industries - Steel pipe for pipeline transportation systems (1st revision)


Road Transport Act 1987 [Act 333]

Motor Vehicles (Construction, equipment and use) (use of Liquefied Petroleum Gas Fuel System in Motor Vehicles) Rules 1982

Specification for LPG fuel system in internal combustion engines





Arahan Tetap Bomba

Code of Practice for The Storage, Handling and Transpotation of LPG (1st revision)


Code of Practice for the Installation of Fuel Gas Piping System and Appliances (1st revision)

*Refer no. 175

Code of Practice for the Installation of Fuel Gas Piping System and Appliances (1st revision)

*Refer no. 174

Code of Practice for The Storage, Handling and Transpotation of LPG (1st revision)



RemarkRegulator


L

176 MS 1-1:2011 Specifications for protective helmets for vehicle users Renumbered MS 1:1996

JPJ

177 MS 1175:2003 Specification for Seat Belts for Motor Vehicles (First Revision)

178 MS 75:2002 Specification for anchorages for seat belts

179

180

181 MS 1394:2008

182 MS 149:2008 New Pneumatic Passenger Car Tyres- Specification

183 MS 1742-1:2004

184

185

186

187

188

189 Vehicle security systems: Part 4: Specification for immobilizer

190 MS 2413-1:2011

191 MS 2413-2:2011

192 MS 2413-3:2011



Road Vehicles

Road Transport Act 1987 [Act 333]

Motorcycles (Safety Helmets) Rules , 1973

En. Sharulnizam SaripEmel:[email protected]

ov.myTel: 03-88866702

Faks: 03-88905950


(Renumbered MS 74) Replaced by MS 1175:2003


(Renumbered MS 75) Replaced by MS 75:2002

Motor Vehicles (Construction and Use) Rules 1959

MS ISO 303:2004

Installation of Lighting and Signalling Devices for Motor Vehicles and Their Trailers

Motor Vehicles (Construction and Use)

Rules 1959

MS 224:2005 AMD. 1:2010

Retreaded Pneumatic Rubber Tyres for Passengers Cars and Commercial Vehicles- Specification (2nd revision)

New Pneumatic Tyres for Highway Vehicles Other Than Passenger Cars- Specifications (1st revision)

Vehicle security systems: Part 1: Guidelines to the application of security systems to vehicles

MS 1742-2:Section 1:2004

Vehicle security systems: Part 2: Locking systems: Section 1: Specification for locking systems

MS 1742-2: Section 2:2004

Vehicle security systems: Part 2: Locking systems: Section 2: Specification for central power locking systems

MS 1742-2: Section 3:2004

Vehicle security systems: Part 2: Locking systems: Section 3: Specification for dead locking systems

MS 1742-2: Section 4:2004

Vehicle security systems: Part 2: Locking systems: Section 4: Specification for devices for ptevention against unauthorised use

MS 1742-3:2004 Vehicle security systems: Part 3: Specification for alarm systems

MS 1742-4: 2004

Kaedah-kaedah Kenderaan Motor

(Pembinaan & Penggunaan) (Pindaan)

2011

ELECTRIC MOTORCYCLE - SPECIFICATION - PART 1: GENERAL

ELECTRIC MOTORCYCLE - SPECIFICATION - PART 2: SAFETY

ELECTRIC MOTORCYCLE - SPECIFICATION - PART 3: PERFORMANCE TEST



M 193 38

194 MS 982:1985 Specification For Fire Safety Signs, Notices and Graphic Symbols BOMBA

195 MS 983:2004

196

197

198 AMD. 1:2003

199 Fire Dampers: Part 1: Specification

200 Fire Dampers: Part 2: Installation (2nd revision)

201

202

203

204 MS 1488:2006 Fire Fighting Hoses-Semi-Rigid Hoses for Fixed Systems

205

206

207 Fire Detection and Fire Alarm Systems: Part 1: Introduction



Fire Safety and

Prevention



MS 1183: Part 8: 1990 (P)

Specification for Fire Precautions in the Design and Construction of Buildings: Part 8: Code of Practice for Means of Escape for Disabled People

Jbtn. Perancangan

Bandar & Desa

Semenanjung Malaysia



Street, Drainage and Building Act 1974

[Act 133]


Uniform Building By-Laws 1984 (G.N.

5178/84)

Arahan Tetap Bomba


KELUAR' SIGNS ( INTERNALLY ILLUMINATED) - SPECIFICATIONS (THIRD REVISION)

MS 1038: Part 1: 1986

Specification for Emergency Lighting of Premises Part 1: Premises Other Than Cinemas and Certain Other Specified Premises Used for Entertainment

MS 1073: Part 2: 1996

Specification for Fire Resistant Doorsets: Part 2: Methods for Determination of the Fire Resistance- General Principles


MS 1073: Part 3: 1996

Specification for Fire Resistant Doorsets: Part 3: Methods for Determination of the Fire Resistance- Type of Doorsets

MS 555: Part 1: 2003

MS 555: Part 2: 2003

MS 1447: Part 1: 2006

Fixed Firefighting Systems-Hose Systems: Part 1: Hose Reels with Semi Rigid Hose

Replaced MS 1447:1999

MS 1447: Part 2: 2006

Fixed Firefighting Systems-Hose Systems: Part 2: Hose Systems with Lay-Flat Hose


MS 1447: Part 3: 2006

Fixed Firefighting Systems-Hose Systems: Part 3: Maintenance of Hose Reels with Semi Rigid Hose and Hose Systems with Lay-Flat Hose

Replaced by MS 1488:2006

MS 1539: Part 1: 2002

Specification for Portable Fire Extinguishers: Part 1: Construction and Testing Methodology

Cor. 1:2004


MS 1539: Part 3: 2003

Specification for Portable Fire Extinguishers: Part 3: Selection and Installation-Code of Practice (1st revision)

MS 1745: Part 1: 2004





M

208

38

BOMBA

209

210

211

212 Fire Detection and Fire Alarm Systems: Part 11: Manual Call Points

213 BOMBA

214 AMD. 1:1999

215 AMD.1:1999

216 AMD.1:1999

217 Confirmed: 1999

218 Confirmed: 1999

219 MS 1395:2011 Specification for Pillar HydrantM BOMBA

220

Hose Reel: Part 3: Code of Practice of Installations

221 MS 1910:2006

222 MS 1590:2003 Carbon Dioxide Extingushing Systems: Design and Installation

223 MS 1472:1999

224 MS 1780:2005

225

226

227

228

229 Vocabulary on Fire Protection: Part 3: Fire Detection and Alarm

230

Fire Safety and

Prevention


[Act 133]



5178/84)

Arahan Tetap Bomba

MS 1745: Part 2: 2004

Fire Detection and Fire Alarm Systems: Part 2: Control and Indicating Equipment

MS 1745: Part 3: 2004

Fire Detection and Fire Alarm Systems: Part 3: Audible Fire Alarm Devices

MS 1745: Part 4: 2004

Fire Detection and Fire Alarm Systems: Part 4: Power Supply Equipment

MS 1745: Part 5: 2005

Fire Detection and Fire Alarm Systems: Part 5: Heat Detectors- Point Detectors

MS 1745: Part 11: 2004

MS 1745: Part 13: 2006

Fire Detection and Fire Alarm Systems: Part 13: Compatibility Assessment of Systems Components

MS 1210: Part 1: 1991

Specification For Fire Hydrants Systems Equipment: Part 1: Landing Valves for Wet Risers

MS 1210: Part 2: 1991

Specification For Fire Hydrants Systems Equipment: Part 2: Landing Valves for Dry Risers

MS 1210: Part 3: 1991

Specification For Fire Hydrants Systems Equipment: Part 3: Inlet Breeching for Riser Inlets

MS 1210: Part 4: 1991

Specification For Fire Hydrants Systems Equipment: Part 4: Boxes for Landing Valves for Dry Risers

MS 1210: Part 5: 1991

Specification For Fire Hydrants Systems Equipment: Part 5: Boxes for Foam Inlets and Dry Riser Inlets

Fire Safety and

Prevention


Act [133]



5178/84)

Arahan Tetap Bomba

*Refer no. 206

MS 1539: Part 3: 2003

Specification for Portable Fire Extinguishers: Part 3: Selection and Installation-Code of Practice (1st revision)

Replaced by MS 1539: Part 3: 2003

En. Nordin PauziEmel:[email protected].

myTel: 03-83185444/ 019-2217006

Faks: 03-83195244

MS 1489: Part 1:1999

Fire Extinguishing Installations and Equipments: Part 1: Hydrant System, Hose Reel and Foam Inlets

*Refer no. 220

MS 1489: Part 1: 1999

Replaced by MS 1489: Part 1: 1999

Fixed Firefighting System-Automatic Sprinkler System-Design, Installation and Maintenance

Code Of Practice For Fire Precautions in the Design Of Buildings-Smoke Control in Protected Escape Routes Using Pressurization

Smoke Control System using Natural (Displacement) or Powered (Extraction) Ventilation

MS 1176: Part 5:1990

Specification for Compenents of Automatic Fire Detection System: Part 5: Heat Sensitive Detectors-Point Detectors Containing a Static Element

MS 1176: Part 7:1991

Specification for Compenents of Automatic Fire Detection System: Part 7: Specification for Point-Type Smoke Detectors Using Scattered Light, Transmitted Light or Ionization

MS 1176: Part 8: 1991

Specification for Compenents of Automatic Fire Detection System: Part 8: Specification for High Temperature Heat Detectors

MS 1176: Part 9: 1993

Specification for Compenents of Automatic Fire Detection System: Part 9: Methods of Test of Sensitivity to Fire

MS 1471: Part 3: 1999

MS 1471:Part 6: 1999

Vocabulary on Fire Protection: Part 6: Evacuation and Means of Escape



RemarkRegulator


P

231 MS 1238:2009

MITI

232

233 MS 1494:2000

234 MS 1495:2000

235 MS 1496:2000

236 MS 1795:2005 Steels for cold heading and cold extruding - Specification

237 MS 1945:2006 Free cutting steels

238

239 Rolled carbon steel for cold-finished steel bars

240

241 Carbon steels for machine structural use

242 Cold finished carbon and alloy steel bars

243

244

245 Cold-reduced carbon steel sheet of structural quality

246 Cold-reduced carbon steel sheet for vitreous enamelling

247

248

249

250

251

252

253





Customs (Prohibition of Imports)

Order 2008 Incorporating latest amendment [P.U.(A)

34/2010]

Specification for galvanized steel wire for aluminium conductors, steel-reinforced

En. Farid Mohd SahatEmel: [email protected]

Tel: 03-62034710Faks:03-62033137

MS 1239: Part 2: 2009

Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables: Part 2: Submarine Cables (1st revision)

Specification for billets for hot rolled non-alloyed steel bars and rods

Specification for blooms for hot rolled non-alloyed structural steel sections

Specification for beam blanks for hot rolled non-alloyed structural steel sections

MS 2240: Part 2:2009

Stainless steels for general purposes: Part 2: Semi-finished products, bars, rods and sections

MS 2245:2009 (P)

MS 2246:2009 (P)

Specification for deformed and plain carbon-Steel bars for concrete reinforcement

MS 2247:2009 (P)

MS 2259:2009 (P)

MS ISO 3574:2009 (P)

Cold-reduced carbon steel sheet of commercial and drawing qualities

MS ISO 4960:2009 (P)

Cold-reduced carbon steel strip with a mass fraction of carbon over 0,25 %

MS ISO 4997:2009 (P)

MS ISO 5001:2009 (P)

MS ISO 5002:2009 (P)

Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities

MS ISO 6932:2009 (P)

Cold-reduced carbon steel strip with a maximum carbon content of 0,25 %

MS ISO 13887:2009 (P)

Cold-reduced steel sheet of higher yield strength with improved formability

MS ISO 14590:2009 (P)

Cold-reduced steel sheet of high tensile strength and low yield point with improved formability

MS ISO 16120: Part 1: 2008

Non-alloy steel wire rod for conversion to wire: Part 1: General requirements (1st revision)

MS ISO 16120: Part 2: 2008

Non-alloy steel wire rod for conversion to wire: Part 2: Specific requirements for general purpose wire rod (1st revision)

MS ISO 16120: Part 3: 2008

Non-alloy steel wire rod for conversion to wire: Part 3: Specific requirements for rimmed and rimmed substitute low carbon steel wire rod (1st revision)



RemarkRegulator




P

254

MITI

255 Bead wire

262 MS 146:2006

CIDB

263 MS 1196:2004





34/2010]

MS ISO 16120: Part 4: 2008

Non-alloy steel wire rod for conversion to wire: Part 4: Specific requirements for wire rod for special applications


Tel: 03-62034710Faks:03-62033137

MS ISO 16650:2009 (P)

MS EN 10025-1:2011

MS EN 10025: Part 1:2009 (P):2011

Hot rolled products of structural steels: Part 1: General technical delivery conditions

MS EN 10025-2:2011

MS EN 10025: Part 2:2009 (P):2011

Hot rolled products of structural steels: Part 2: Technical delivery conditions for non-alloy structural steels

MS EN 10025-3:2011

MS EN 10025: Part 3:2009 (P):2011

Hot rolled products of structural steels: Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels

MS EN 10025-4:2011

MS EN 10025: Part 4:2009 (P) :2011

Hot rolled products of structural steels: Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels

MS EN 10025-5:2011

MS EN 10025: Part 5:2009 (P) :2011

Hot rolled products of structural steels: Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance

MS EN 10025-6:2011

MS EN 10025: Part 6:2009 (P):2011

Hot rolled products of structural steels: Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition


(Pindaan)2011

Hot rolled steel bars for the reinforcement of concrete - Specification (3rd revision)

Ir. Mukhtar Che AliEmel:[email protected]

.myTel: 03-26170359

Faks: 03-40451808

Continuous hot-dip aluminium/zinc-coated steel sheet of commercial, drawing and structural qualities (1st revision)

*Refer no. 256 MS EN 10025-

1:2011 Hot rolled products of structural steels: Part 1: General technical delivery conditions



RemarkRegulator




264 MS 1092 : 1987 SPECIFICATION FOR LOW CARBON STEEL WIRE RODS

CIDB

265 MS 1093 : 1987 SPECIFICATION FOR HIGH CARBON STEEL WIRE RODS

266MS 1137:2009

267PRESTRESSING STEEL - PART 2: COLD-DRAWN WIRE

268PRESTRESSING STEEL - PART 1: GENERAL REQUIREMENTS

269

270

271

MS 1239-1:2009

272MS 144:2006

273MS 145:2006

274

MS 1705:2003

MITI275 MS 1721 :2003 Structural steels - plates, wide flats and wide strips276 MS 1768:2004 Hot-rolled carbon steel strip for pipes and tubes277

278


(Pindaan)2011

Ir. Mukhtar Che AliEmel:[email protected]

.myTel: 03-26170359

Faks: 03-40451808

LOW CARBON STEEL WIRES - SPECIFICATION (FIRST REVISION)

MS 1138 :Part 2 : 2007

MS 1138: Part 1 : 2007

MS 1138: Part 3 : 2007

PRESTRESSING STEEL - PART 3: STEEL BARS (QUENCHED AND TEMPERED)

MS 1138: Part 4 : 2007

PRESTRESSING STEEL - PART 4: STRAND FOR PRESTRESSED CONCRETE

ZINC OR ZINC COATED NON-ALLOY STEEL WIRE FOR ARMOURING EITHER POWER CABLES OR TELECOMMUNICATION CABLES - LAND CABLES (FIRST REVISION)

COLD REDUCED MILD STEEL WIRE FOR THE REINFORCEMENT OF CONCRETE - SPECIFICATION (THIRD REVISION)

WELDED STEEL FABRIC FOR THE REINFORCEMENT OF CONCRETE - SPECIFICATION (THIRD REVISION)




34/2010]

Hot-rolled carbon steel strip and sheet of commercial and drawing qualities


Tel: 03-62034710Faks:03-62033137

MS 2025: Part 1: 2006

Cold formed sheet piling of non alloy steels: Part 1: Technical delivery

MS 2025: Part 2: 2006

Cold formed sheet piling of non alloy steels: Part 2: Tolerances on shape and dimension


No. MS No. Title of MS Agency

R ST(lP/KKE) 16/1 (3) 279 ST

S 280 ST

281 MS IEC 60065:2007

282 MS IEC 60400:2006 Lampholders for tubular fluorescent lamps and starterholders283 MS 769:1982 Confirmed 2006 ST

284

285 Luminaires: Part 2: Particular requirements: Section 2: Recessed luminaires

286 MS IEC 61048:2006

287 MS IEC 61049:1999

288 Lamp controlgear: Part 1: General and safety requirements

289

290 AMD.1: 1997

291

292 MS IEC 60929:2001

293

294

295

296

297

298



Contact details




MS IEC 60364-7-710:2009

Electrical Installations of Buildings: Part 7-710: Requirements for Special Installations or Locations-Medical Locations Pn. Fairus Abd.

ManafEmel:[email protected]: 03-88708607Faks: 03-88888652

Electrical and

Electronic Equipments

and Accessories


Approval of Electrical EquipmentElectricity Regulations 1994 -

P.U.(A) 38/94;[Am: P.U.(A) 290/94, P.U.(A)

40/95, P.U.(A) 192/98, P.U.(A) 397/99, P.U.(A) 431/2003]

ST DirectiveInformation Booklet

2009 Edition

MS IEC 60320-1:2010

Appliances couplers for household and similar general purposes: Part 1: General requirements

Ir. Amir Hassan

Emel:[email protected]: 03-

88708605Faks: 03-

88888652

Audio, video and similar electronic apparatus – safety requirements (1st revision)

Specification for bayonet lamps-caps lampholders and B.C. adaptors (lampholder dr plugs)


Luminaires: Part 2: Particular requirements: Section 1: Fixed general purpose luminaires

MS IEC 60598-2: Section 2:1998

Auxiliaries for lamps – Capacitors for use in tubular fluorescent and other discharge lamp circuits – General and safety requirements

Capacitors for use in tubular fluorescent and other discharge lamp circuits performance requirements

MS IEC 61347-1:2003

MS IEC 61347-2-8:2003

Lamp controlgear: Part 2-8: Particular requirements for ballast for fluorescent lamps

MS 141-2:1993,AMD.1:1997

Specification for ballasts for tubular fluorescent lamps: Part 2: Performance requirements

MS IEC 61347-2-3:2003

Lamp controgear: Part 2-3: Particular requirements for a.c supplied electronic ballasts for fluorescent lamps

Specification for a.c supplied electronic ballasts for tubular fluorescent lamps-performance requirements

MS IEC 60335-1:2003

Household and similar electrical appliances – safety: Part 1: General requirements

MS IEC 60335-2-2:2006

Household and similar electrical appliances - Safety: Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliance

MS IEC 60745-2-15:2006

Safety of hand-held motor-operated electric tools: Art 2-15: Particular requirements for hedge trimmers and grass shears

MS IEC 60335-2-21:2005

Household and similar electrical appliances – Safety: Part 2-21: Particular requirements for storage water heaters

MS IEC 60335-2-23:2005

Household and similar electrical appliances – safety: Part 2-23: Particular requirements for appliances for shin or hair care

MS IEC 60335-2-28:2003

Household and similar electrical appliances - Safety: Part 2-28: Particular requirements for sewing machines





Contact details

S

299

ST

300 MS 1597-2-35:2010

Electrical and


and Accessories



P.U.(A) 38/94;[Am: P.U.(A) 290/94, P.U.(A)

40/95, P.U.(A) 192/98, P.U.(A) 397/99, P.U.(A) 431/2003]


2009 Edition

Ir. Amir Hassan


88708605Faks: 03-

88888652

MS IEC 60335-2-101:2003

Household and similar electrical appliances - Safety: Part 2-101: Particular requirements for vaporizers

Safety of household and similar electric appliances: Part 2-35: Particular requirements for instantaneous water heater (1st revision)





Contact details

S

301

ST

S 302 ST

303

304

305

306

307

308

309

310

311

312

313 MS 1597-2-6:2003

314

315 MS 1219-2:2002

316 MS 1220:2010 Performance and construction of electric circulating fans and regulators

317

318

Electrical and


and Accessories



P.U.(A) 38/94;[Am: P.U.(A) 290/94, P.U.(A)

40/95, P.U.(A) 192/98, P.U.(A) 397/99, P.U.(A) 431/2003]


2009 Edition

Ir. Amir Hassan


88708605Faks: 03-

88888652


Luminaires: Part 2: Particular requirements: Section 4: Portable general purpose luminaires (1st revision)

Electrical and


and Accessories



P.U.(A) 38/94;[Am: P.U.(A) 290/94, P.U.(A)

40/95, P.U.(A) 192/98, P.U.(A) 397/99, P.U.(A) 431/2003]


2009 Edition

MS IEC 60598-2-8:2006

Luminaires: Part 2-8: Particular requirements handlamps (1st revision)Ir. Amir HassanEmel:[email protected]: 03-88708605Faks: 03-88888652

MS IEC 60335-2-12:2003

Household and similar electrical appliances - Safety: Part 2-12 : Particular requirements for warming plates and similar appliances

MS IEC 60335-2-15:2004

Household and similar electrical appliances - Safety: Part 2-15: Particular requirements for appliances or heating liquids

MS IEC 60335-2-13:2006

Household and similar electrical appliances - Safety: Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances

MS IEC 60335-2-9:2006

Household and similar electrical appliances - Safety: Part 2-9: Particular requirements for grills, toasters, and similar portable cooking appliances

MS IEC 60335-2-36:2003

Household and similar electrical appliances - Safety: Part 2-36 : Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements

MS IEC 60335-2-3:2006

Household and similar electrical appliances - Safety: Part 2-3: Particulars requirements for electric iron

MS IEC 60335-2-8:2002

Safety of household and similar electrical appliances - Safety: Part 2-8 : Particular requirements for shavers, hair clippers and similar appliances

MS IEC 60335-2-14:2003

Household and similar electrical appliances – Safety: Part 2-14: Particular requirements for kitchen machines (1st revision)

MS IEC 60335-2-73:1996

Household and similar electrical appliances - Safety: Part 2-73: Particular requirements forfixed immersion heaters

MS IEC 60335-2-74:2010

Household and similar electrical appliances - Safety: Part 2-74 : Particular requirements for portable immersion heaters

Ir. Amir Hassan


88708605Faks: 03-

88888652

Household and similar electrical appliances - Safety: Part 2-6 : Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances

MS IEC 60335-2-25:2007

Household and similar electrical appliances - Safety: Part 2-25: Particular requirements for microwave ovens

Safety of household and similar electrical appliances : Part 2 : Particular requirements for fans

MS 1597-2-80:2007

Household and similar electrical appliances - Safety: Part 2-80: Particular requirements for fans (2nd revision)

MS IEC 60335-2-31:2003

Household and similar electrical appliances - Safety: Part 2-31: Particular requirements for range hoods





Contact details

S

319

ST

320

321

322

323

324

325 Luminaires: Part 2-20: Particular requirements - Lighting chains

326

327

328

329

330

331

332

Electrical and


and Accessories



P.U.(A) 38/94;[Am: P.U.(A) 290/94, P.U.(A)

40/95, P.U.(A) 192/98, P.U.(A) 397/99, P.U.(A) 431/2003]


2009 Edition

Ir. Amir Hassan


88708605Faks: 03-

88888652

MS IEC 60335-2-98:2003

Household and similar electrical appliances - Safety: Part 2-98: Particular requirements for humidifiers

MS IEC 60335-2-4:2007

Household and similar electrical appliances - Safety: Part 2-4: Particular requirements for spin extractors

MS IEC 60335-2-7:2007

HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-7: PARTICULAR REQUIREMENTS FOR WASHING MACHINES (FIRST REVISION) (IEC 60335-2-7:2006, IDT)

MS IEC 60335-2-11:2003

Household and similar electrical appliances - Safety: Part 2-11: Particular requirements for tumble dryers (1st revision)

MS IEC 60335-2-43:2007

Household and similar electric appliances - Safety: Part 2-43: Particular requirements for cloths dryers and towel rails

MS IEC 60335-2-24:2002

Safety of household and similar electrical appliances: Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers

MS IEC 60598-2-20:2005

MS IEC 60745-1:2010

Hand-held motor-operated electric tools – Safety: Part 1: General requirements

MS IEC 60745-2-5:2010

Hand-held motor-operated electric tools-Safety: Part 2-5: Particular requirements for circular saws

MS IEC 60745-2-1:2011

Hand-held motor-operated electric tools - Safety: Part 2-1: Particular requirements for drills and impact drills

MS IEC 60745-2-3:2010

Safety of handheld motor-operated electric tools: Part 2-3: Particular requirements for grinders, polishers and disk-type sanders

MS IEC 60745-B3452-4:2011

Hand-held motor-operated electric tools - Safety: Part 2-4: Particular requirements for sanders and polishers other than disk type

MS IEC 60745-2-7:2005

Safety of handheld motor-operated electric tools: Part 2-7: Particular requirements for spray guns for non-flammable liquids

MS IEC 60745-2-11:2005

Hand-held motor-operated electric tools -Safety: Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)





Contact details

S 333 ST

334

335

336

337 AMD.1: 2005

ST (IP/KKE) 16/2/1(11) 338 MS 62115:2008 Electric Toys Safety

339 MS 619-2-22:2005 KPDNKK

Arahan Tetap Bomba Luminaires: Part 1: General requirements and test BOMBA

340 MS 60335-2-6:1999 ST

341

Electrical and


and Accessories




MS IEC 60745-2-14:2011

Hand-held motor-operated electric tools - Safety: Part 2-14: Particular requirements for planers requirements for planers


MS IEC 60745-2-17:2005

Hand-held motor-operated electric tools -Safety: Part 2-17: Particular requirements for routers and trimmers

MS IEC 60335-2-79:2007

Household and similar electrical appliances - Safety: Part 2-79: Particular requirements for high pressure cleaners and steam cleaners

MS IEC 60335-2-45:2003

Household and similar electrical appliances - Safety: Part 2-45: Particular requirements for portable heating tools and similar appliances (1st revision)

MS IEC 60335-2-76:2007

Household and similar electrical appliances - safety: Part 2-76: Particular requirements for electric fence energizers






Luminaires: Part 2-22: Particular Requirements-Luminaires for Emergency Lighting (1st revision)





*Refer no. 161

MS IEC 60598-1:2006

Replaced MS 619: Part 102: Sec 102.22: 1985 (P) En. Nordin

PauziEmel:[email protected]: 03-83185444/ 019-2217006Faks: 03-83195244



P.U.(A) 38/94;[Am: P.U.(A) 290/94, P.U.(A)

40/95, P.U.(A) 192/98, P.U.(A) 397/99, P.U.(A) 431/2003]


2009 Edition

HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-6: PARTICULAR REQUIREMENTS FOR STATIONARY COOKING RANGES, HOBS, OVENS AND SIMILAR APPLIANCES (SECOND REVISION)



88708607Faks: 03-

88888652

MS IEC 60335-2-29:2005

HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-29 : PARTICULAR REQUIREMENTS FOR BATTERY CHARGERS





Contact details

S

ST

Electrical and


and Accessories



P.U.(A) 38/94;[Am: P.U.(A) 290/94, P.U.(A)

40/95, P.U.(A) 192/98, P.U.(A) 397/99, P.U.(A) 431/2003]



88708607Faks: 03-

88888652

ST/IP/PK/JKKE/Pk 02/2011

*Refer no. 289 & 290

MS IEC 61347-1:2003

Lamp controlgear: Part 1: General and safety requirements

*Refer no. 289 & 290

MS IEC 61347-2-8:2003

Lamp controlgear: Part 2-8: Particular requirements for ballast for fluorescent lamps





Contact details

342 Information technology equipment – Safety: Part 1: General equipment

ST

U 343 MS 1875:2006 Penentuan untuk Isi Kacang Tanah Mentah 1

Z 344 MS 1596:2003 2

345 MS 1723:2003

345



88708607Faks: 03-

88888652

Communications And Multimedia Act 1998

[Act 588]

Customs (Prohibition of Imports) Order 2008

Incorporating latest amendment [P.U.(A) 34/2010]

MS IEC 60950: Part 1



MS 457 & MS 458 telah digabung menjadi MS 1875

Environmental

Management



Determination of Concentration and Mass Flow of Particulate Matter in Flue Gas for Stationary Source Emissions

JAS (Bhgn Udara)

Rashidah Mohd GhazaliEmel:[email protected]: 03-88712326Faks: 03-

Performance Evaluation of Air Pollution Control & Treatment Systems: Mecghanical Dust Collectors

ISC Field No of Mandatory Standards

A AgricultureB Chemicals and Materials Row LabelsC Consumer Interests AD B

E D

F Mechanical Engineering EG F

H Petroleum and Gas HI Halal Standards JJ Plastics and Plastics Products LK Packaging and Logistics ML Road Vehicles NM Fire Safety and Prevention PN Rubber and Rubber Products RO Organisational Management SP U

Q Textiles and Apparels WR Z

S Grand Total

T

U Food and Food ProductsW Occupational Safety and HealthY

Z Environmental Management



Information Technology, Communications and Multimedia




Tourism, Exhibition and Hospitality Services

Quality Management and Quality Assurance

(Multiple Items)

Count of Title of MS/Current Malaysian Standards (MS)469

58

8620

86

18391

541

891

22

440

No of Mandatory Standards - all -

Count of MS NUMBER / Current Malaysian Standards (MS) ISCAgency A B D E F H J L M N P R S U W Z Total ResultBOMBA 11 7 3 4 1 38 1 1 2 68CIDB 34 2 13 1 41 91DOSH 2 2 4FAMA 42 1 43JAS (Bhgn Udara) 2 2 4Jbtn. Perancangan Bandar & Desa Semenanjung Malaysia 2 1 3JKT, KPKT 16 16JPJ 1 17 18KPDNKK 7 1 1 1 10MITI 3 1 12 16MPOB 1 1SKMM 7 7SPAN 1 1 5 7ST 1 74 1 91 167KKM 1 1 2LKM 2 2Total Result 46 9 68 90 20 10 6 18 39 1 54 1 92 1 2 2 459

BOMBA

CIDB

DOSH

FAMA

JAS (Bhgn Udara)


JKT, KPKT

JPJ

KPDNKK

MITI

MPOB

SKMM

SPAN

ST

KKM

LKM

Bahagian Keselamatan Kebakaran,JABATAN BOMBA DAN PENYELAMAT MALAYSIA, LEBUH WAWASAN, PRESINT 7, 62250 PUTRAJAYA.No. Tel : 603-8892 7600 No. Faks : 603-8888 0025

Ahmad Faiz bin Tharima @ ZainuPenguasa Kanan Bomba I Bahagian Keselamatan Kebakaran Email :[email protected] No. :03-83185444(142)

Bahagian Bahan Binaan,Lembaga Pembangunan Industri Pembinaan MalaysiaTingkat 10, Menara Dato' Onn,Pusat Dagangan Dunia Putra,No 45, Jalan Tun Ismail50480 Kuala Lumpur Tel: 03-4047 7000Fax No : 03-4047 7070

Ir. Mukhtar Che Ali Pengurus Besar Tel 4047 7 434

Aras 4 (Kaunter Utama), Blok D3, Kompleks D, Pusat Pentadbiran Kerajaan Persekutuan, 62530 Putrajaya(T): 03 - 8886 5343(F): 03 - 8889 2443Call Centre: 03-8871 1228

Ir Zulkafli Bin Zainuddin,Email :[email protected] : 03-8886 1319Fax : 03-8889 2352

Bahagian Undang UndangBangunan FAMA Point, Lot 17304 Jalan Persiaran 1, Bandar Baru Selayang, 68100 Batu Caves, Selangor. Tel : 603-61262020 No Faks : 603-61383650/61385200

Pn. Norhayati Hj Maulud,Bahagian Undang UndangEmel:[email protected] Tel: 03-61264000 ext 4127Faks: 03-61374766

Department of EnvironmentMinistry of Natural Resources and EnvironmentLevel 1 – 4, Podium 2 & 3, Wisma Sumber AsliNo.25, Persiaran Perdana, Precint 4Federal Government Administrative Centre62574 Putrajaya, Malaysia.

Pn. Nor Rashidah Mohd Ghazali,Unit UdaraEmel:[email protected]: 03-88712326Faks: 03-88884151

Kementerian Kesejahteraan Bandar, Perumahan dan Kerajaan TempatanAras 2 - 38, No. 51, Persiaran Perdana, Presint 4, 62100, Putrajaya, Malaysia.

Pn. Aminah Abd. RahmanBahagian Penyelidikan Dan Perundangan TeknikalEmel:[email protected]: 03-88913436Faks: 03-20953717


Kementerian Kesejahteraan Bandar, Perumahan dan Kerajaan TempatanAras 2 - 38, No. 51, Persiaran Perdana, Presint 4, 62100, Putrajaya, Malaysia.

Pn. Aminah Abd. RahmanBahagian Penyelidikan Dan Perundangan TeknikalEmel:[email protected]: 03-88913436Faks: 03-20953717


Ketua PengarahJabatan Pengangkutan Jalan Malaysia (JPJ)Ibu Pejabat Aras 2, Blok D4, Kompleks D62620 PUTRAJAYA.

En. Sharulnizam SaripBahagian Kejuruteraan AutomotifEmel:[email protected]: 03-88866702Faks: 03-88905950

Bahagian Standard KepenggunaanKementerian Perdagangan Dalam Negeri, Koperasi dan KepenggunaanNo 13, Persiaran Perdana,Presint 2, 62623 Putrajaya,Malaysia

Bahagian Hubungan Ekonomi dan PerdaganganKementerian Perdagangan Antarabangsa dan IndustriBlok 10, Kompleks Pejabat Kerajaan, Jalan Duta,50622 Kuala Lumpur Malaysia

Bahagian Pelesenan & PenguatkuasaanLot 6, SS6, Jalan Perbandaran47301 Kelana JayaSelangor

BAHAGIAN PEMBANGUNAN PRASARANA & PIAWAIANSuruhanjaya Komunikasi dan Multimedia MalaysiaOff Persiaran Multimedia63000 CyberjayaSelangor Darul EhsanMalaysia

Suruhanjaya Perkhidmatan Air Negara Aras Bawah dan Satu , Prima Avenue, Block 3510,Jalan Teknokrat 6, 63000 Cyberjaya, Malaysia.

Suruhanjaya Tenaga No. 12, Jalan Tun Hussein Precinct 2,62100, Putrajaya.

BAHAGIAN KESELAMATAN DAN KUALITI MAKANAN Kementerian Kesihatan Malaysia Aras 3, Blok E7, Parcel E, Pusat Pentadbiran Kerajaan Persekutuan, 62590 WP Putrajaya, Malaysia.

Mohd. Zamri A. GhaniPengawalseliaan dan Kawalan Kualiti SemenanjungLembaga Koko Malaysia,Pusat Inovasi & Teknologi Koko,Lot Pt 12621, Kawasan Perindustrian Nilai,71800 Nilai, Negeri Sembilan, Malaysia

Documents

Standard Mandatori Yang Telah Dikemaskini_190615