STANDARD Signal Circular Connectors - RELO … · A16 A17 A xx xx xx xxxx 000 510 165 163 164 P type, 16 contacts Insulation inserts 12 contacts STANDARD Coding groove

2A 3A

STANDARDSignal Circular Connectors

5A

5A

A S T A 0 5 5 M R 0 4 1 0 0 0 3 5 0 0 0

Ordering information STANDARD signal circular connectors

HOUSING DESIGNS

ST = PlugSD = Angled plug, rotatableDF = BushingKU = ExtensionEG = Receptacle, straightEW = Receptacle, angledED = Receptacle, angled rotatable

SERIESA = Signal connectors STANDARD

HOUSING SURFACE

A = Nickel platedB = Plastic coveredC = ChromatedD = Chrome plated (black)

INSULATION INSERTS

Component related code,e.g. 055

CONTACT, CONNECTION

M R

CONTACT TYPE

Component related code,e.g. 04

CABLE CLAMPING

Cable diameter related code,e.g. 10

DESIGN VARIATIONS

See table page A27 ff.

PACKAGING

Standard packaging code: 000

All standard connectors are published in this catalog. However, this catalog does not provide customer specifi cdesigns or variations.

If you are looking for an application optimized solution, don´t hesitate to contact us.

Any questions? Please call our technical sales staff – phone +49 (0)9962 20020.

STANDARD

1st. letterM = Male contactF = Female contact

2nd. letterR = CrimpingS = SolderingD = Board soldering

6A 7A

A x x x x x x x x x x x x x 0 0 0

S T

S T

S T

S D

D F

AVAILABLE HOUSING SURFACES:

A = Nickel plated B = Plastic covered D = Chrome plated (black)

Housing designs

Bushing housing

Available housing surfaceA = Nickel plated

Plug housing

If necessary, distance hulls for insulation inserts are automatically supplied with the connectors. A series standard housings are also available in stainless steel fortypical applications in food processing industry

Plug housingPlastic covered version

Plug housingPush-Pull version

Angled plug, rotatable

Available housing surfaceA = Nickel plated

STANDARD

Please add the corresponding code to the ordering information

Note: Distinction between housing designs with identical ordering code, e.g. ST, please see catalog section DESIGN VARIATIONS x x x x (p. A27 ff.)

6A 7A


K U

K U

K U


A = Nickel plated B = Plastic covered D = Chrome plated (black)

Housing designs

Extension housingincluding vibration protection

Extension housing – plastic coveredincluding vibration protection

Extension housing, central fi xing

including vibration protection

STANDARD

8A 9A


E G E G


A = Nickel plated D = Chrome plated (black)

Housing designs

Receptacle – straight versionAxial sealing,


Receptacle – PG 13,5 including sealing andvibration protection

STANDARD

Note: Distinction between housing designs with identical ordering code, e.g. EG, please see catalog section DESIGN VARIATIONS x x x x (p. A27 ff.)

8A 9A


E W E D

E D


C = Chromated D = Chrome plated (black)

Housing designs

Receptacle – angled, fi xedAxial sealing,


Receptacle – angled, rotatableAxial sealing,


STANDARD

Receptacle – angled, rotatablelarge fl ange (28 x 28mm)

Axial sealing, including vibration protection

10A 11A

A x x x x x x x x x x 0 0 0

5 40

5 50

7 107 00

Insulation inserts[8+1], 9 contacts STANDARD

Suitable for housing design

PLUG ANGLED PLUG EXTENSION BUSHING

E type, 9 contactsP type, 9 contacts

3 coding grooves

E type[8+1] contacts

P type[8+1] contacts

Please add the corresponding code to the ordering information

3 coding grooves

3 coding grooves 3 coding grooves

10A 11A

6 60


8 35

7 202 52

Suitable for RECEPTACLES

STRAIGHT PG 13,5 ANGLED ANGLED ROTATABLE

E type, 9 contactsincluding securing clip

P type, 9 contactsincluding securing clip

Insulation inserts[8+1], 9 contacts STANDARD

3 coding grooves

E type, [8+1] contactsincluding securing clip

P type, [8+1] contactsincluding securing clip

Versions – sealed to IP67 – in unplugged condition on request (male contacts only!)

3 coding grooves


12A 13A


3 323 22

2 00

5 60

Insulation inserts12 contacts STANDARD

P type, 12 contacts

3 coding grooves

P type, 12 contactsCoding pin on Pin 7

P type, 12 contactsCoding pin on Pin 1

P type, 12 contacts5171 version




3 coding grooves

12A 13A


0 310 41

2 10

5 70

E type, 12 contacts


3 coding grooves

E type, 12 contactsCoding hole on Pin 7

E type, 12 contactsCoding hole on Pin 1

E type, 12 contacts5171 version




3 coding grooves

14A 15A

1 41


4 960 21

5 20

5 064 90




3 coding grooves

E type, 12 contactsincl. securing clipCoding pin on pin 1

P type, 12 contactsincl. securing clipCoding pin on pin 1

E type, 12 contactsincl. securing clipCoding pin on pin 7

P type, 12 contactsincl. securing clipCoding pin on pin 7


STRAIGHT PG 13,5 ANGLED ANGLED ROTATABLEVersions – sealed to IP67 – in unplugged condition on request (male contacts only!)

3 coding grooves



14A 15A

3 02


7 30

E type, 12 contacts5171, incl. securing clip

P type, 12 contacts5171, incl. securing clip


3 coding grooves



3 coding grooves

16A 17A


6 511 05

6 31 6 41

P type, 16 contacts


Coding groove



E type, 16 contacts





Coding groove

Coding groove Coding groove

16A 17A


1 312 72

3 50 3 40

P type, 17 contacts


3 coding grooves



E type, 17 contacts





3 coding grooves


18A 19A

7 92


7 82

5 955 85

E type, [16+3] contactsincl. grounding spring

P type, [16+3] contactsincl. grounding spring

Insulation inserts[16+3] contacts STANDARD



Coding groove

E type, [16+3] contactswithout grounding spring

P type, [16+3] contactswithout grounding spring

Coding groove


18A 19A

7 83


4 35

6 056 15

E type, [16+3] contactsincl. securing clipand grounding spring

P type, [16+3] contactsincl. securing clipand grounding spring

Insulation inserts[16+3] contacts STANDARD



Coding groove

E type, [16+3] contactsincl. securing clip,without grounding spring

P type, [16+3] contactsincl. securing clip,without grounding spring

Coding groove


20A 21A

A x x x x x x 0 0 0

!

RF 0 1 SF 0 4

RF 1 1 SF 1 3

Suitable for all housing designs and insulation inserts

HC crimping female contact 1,0mmCrimping range: max. 1,0mm2

HC soldering female contact 1,0mmSoldering connection: 1,5mm2

Slit crimping female contact 1,0mmCrimping range: max. 1,0mm2

Slit soldering female contact 1,0mmSoldering connection: 1,5mm2

Please see the following pages to select ordering codes for contact combinations suitable

Insulation inserts [8+1] contacts (8x1 + 1x2mm) or Insulation inserts [16+3] contacts (16x1 + 3x1,5mm)

Female type contacts STANDARD

Please select the corresponding code

20A 21A

A x x x x x x 0 0 0

RM 0 4

RM 8 3

SM 0 6

DM 1 4

Male type contacts STANDARD

Crimping male contact 1,0mmCrimping range: max. 1,0mm2

Soldering male contact 1,0mmSoldering connection: 1,5mm2

Crimping male contact 1,0mmCrimping range: max. 0,2mm2

Board soldering male contact 1,0mmsuitable for receptacle, straight version

Suitable for all housing designs and insulation inserts

22A 23A

A x x x x x x 0 0 0

RF 2 9

SF 3 4

RF 1 0

Female typeContact combinations STANDARD

8x HC crimping female contact 1,0mmCrimping range: max. 1,0mm2

1x Slit crimping femalecontact 2,0mm

Crimping range: max. 2,5mm2

8x Slit crimping female contact 1,0mmCrimping range: max. 1,0mm2

1x Slit crimping femalecontact 2,0mm

Crimping range: max. 2,5mm2

8x Slit soldering femalecontact 1,0mmSoldering conn.: 1,5mm2

1x Slit soldering femalecontact 2,0mm

Soldering conn.: 2,5 mm2

Female contact combinations:Suitable for insulation insert [8+1] contacts P and E types (8x1mm + 1x2mm)

22A 23A

A x x x x x x 0 0 0

RM 1 8

SM 1 9

Male typeContact combinations STANDARD

Male contact combinations:Suitable for insulation insert [8+1] contacts P and E types (8x1mm + 1x2mm)

8x Crimping malecontact 1,0mmCrimp. range: max. 1,0mm2

1x Crimping male contact 2,0mmCrimping range: max. 2,5mm2

8x Soldering malecontact 1,0mmSoldering conn.: 1,5mm2

1x Soldering male contact 2,0mmSoldering connection: 2,5mm2

24A 25A

A x x x x x x 0 0 0

RF 9 2

RF 9 1

Female typeContact combinations STANDARD

16x HC crimping femalecontact 1,0mmCrimp. range: max. 1,0mm2

3x Slit crimpingfemale contact 1,5mm

Crimp. range: max. 1,0mm2

16x Slit crimpingfemale contact 1,0mmCrimp. range: max. 1,0mm2

3x Slit crimpingfemale contact 1,5mm


Female contact combinations:Suitable for insulation inserts [16+3] contactsP and E types (16x1mm + 3x1,5mm)

24A 25A

A x x x x x x 0 0 0

RM 9 3

Male typeContact combinations STANDARD

16x Crimping malecontact 1,0mmCrimp. range: max. 1,0mm2

3x Crimping malecontact 1,5mm


Male contact combinations:Suitable for insulation inserts [16+3] contacts P and E types (16x1mm + 3x1,5mm)

26A 27A

A x x x x 0 0 0

1 0

1 2

6 0

6 2

6 1

Cable clamping STANDARD


PLUG ANGLED PLUG EXTENSION

STANDARD clampingClamping unit including seal with strain relief, shielding element, clamping ring

Standard cable clamping

Suitable for cable diameter:5,5 – 10,5mm

Please select the correspondingordering code.Note: For all receptacles housingdesigns add „00“

Shielding element

Clamping unit including seal with strain relief

Clamping ring

Standard cable clamping

Suitable for cable diameter:9,0 – 12,0mm

Advanced LAMELLA clamping„Jagged“ clamping unit (improved revolving protection), incl. seal and strain relief, shielding element, clamping ring

Shielding element

Clamping ring

Clamping unit (revolving protection,seal and strain relief)

Lamella type cable clamping

Suitable for cable diameter: 4,5 – 8,5mm





26A 27A

A 0 0 0

0 30 5

0 30 6

0 40 1

0 40 2

0 40 7

PLUG

Design variations STANDARD

ORDERING CODE SPECIFICATIONSPICTURE AND CODING

Code 1 – Housing code 0° Metal construction

Code 2 –Housing code 80° / 120°

Metal construction

Code 1 – Housing code 0°

Housing plastic covered Clamping ring: Plastic

Code 2 – Housing code 80° / 120°

Housing plastic covered Clamping ring: Plastic


Metal construction PUSH-PULL version

Please select the corresponding code to the ordering information

Customer specifi c designs on request

28A 29A

A 0 0 0

0 30 5

0 30 6

ANGLED PLUG



Code 1 – Housing code 0° Metal construction

Code 2 –Housing code 80° / 120°

Metal construction


28A 29A

A 0 0 0

0 00 1

BUSHING


Code 1 – Housing code 0° Axial sealing



30A 31A

0 30 9

A 0 0 0

0 30 5

0 40 1

0 40 0

0 40 2


Metal construction Vibration protection

EXTENSION




Metal construction Vibration protection


Housing plastic covered Clamping ring: Plastic Vibration protection


Code 1 –Housing code 0°

Metal construction with central fi xing Vibration protection


Housing plastic covered Clamping ring: Plastic Vibration protection

30A 31A

0 52 3

0 30 3

A 0 0 0

0 10 2

Code 1 –Housing code 0°

PG 13,5 connecting thread Vibration protection


Axial sealing Vibration protection

RECEPTACLES STRAIGHT






32A 33A

A 0 0 0

0 10 4

0 10 2

0 10 3

RECEPTACLES ANGLED, FIXED








RECEPTACLES ANGLED, ROTATABLE



Large fl ange (28 x 28mm) Axial sealing Vibration protection

A

TECHNICAL DATA FOR STANDARD SIGNAL CIRCULAR CONNEC-TORSOperating temperature -20°C to +130°C

Degree of protection IP 66/67 (plugged condition)

ELECTRICAL DATA – [8+1]- TO 12 CONTACT VERSIONSMax. current (max. wire gauge)

max. 10 A

Max. voltage 160 V (AC/DC)

Test voltage (between contacts) 2500 V

Contact resistance < 5 mΩ

Mating cycles > 50

ELECTRICAL DATA – 16-, 17-, [16+3] CONTACT VERSIONSMax. current (max. wire gauge)

max. 9 A

Max. voltage 125 V (AC/DC)

Test voltage (between contacts) 2500 V

Contact resistance < 5 mΩ

Mating cycles > 50

DATA ACCORDING TO VDE 0110/EN61984, PART 6.19.2.2Pollution degree 3

Overvoltage category III

Max. height of operation 2000 m

MATERIALS

HousingZinc die cast / brass

(option: stainless steel)

Connecting nut (some designs) Brass, nickel plated

Insulation inserts PA 6.6/ PBT, UL 94/ V0

Contacts Brass, gold plated

Seals FPM/HNBR

STANDARDTechnical data STANDARD

34A 35A

Drawings STANDARD

PLUGDesign variations0035 / 0036 / 0041 / 0042

EMC shieldingHousing code: Code 1 or code 2

PLUG – PUSH-PULL VERSIONDesign variation 0047

EMC shieldingHousing code: Code 1

34A 35A

Drawings STANDARD

ANGLED PLUG, ROTATABLEDesign variations 0035 / 0036

EMC shieldingHousing code: Code 1 or code 2

BUSHINGDesign variation 0001

Axial sealingHousing code: Code 1

36A 37A

Drawings STANDARD

EXTENSIONDesign variations 0035 / 0039

EMC shieldingVibration protectionHousing code: Code 1 or code 2

EXTENSION WITH CENTRAL FIXINGDesign variation 0040

EMC shieldingVibration protectionHousing code: Code 1

Mounting hole

36A 37A

Drawings STANDARD

RECEPTACLE, STRAIGHTINTEGRATED FLANGEDesign variations 0012 / 0033

Axial sealingVibration protectionHousing code: Code 1 or code 2

RECEPTACLE PG 13,5Design variation 2053

Vibration protectionSealingHousing code: Code 1

Flange dimensions Mounting holes

38A 39A

Ø20 ± 0,2

M2,5

Ø28

19,8

19,8

Ø2,7

25,7

45°

25,7

19,8

Ø28

Ø20 ± 0,2

M2,5

Ø28

19,8

19,8

Ø2,7

25,7

45°

25,7

19,8

Ø28

Drawings STANDARD

Ø20 ± 0,2

RECEPTACLE ANGLED FIXEDDesign variation 0014

Axial sealingVibration protectionHousing code: Code 1

Ø20 ± 0,2

RECEPTACLE ANGLED ROTATABLEDesign variation 0012




38A 39A

STANDARDDrawings

RECEPTACLE ANGLED ROTATABLELARGER FLANGE 28 x 28mmDesign variation 0013



40A 41A

Accessories

Metal fl ange2 components, 4x M4 thread,

for optional clamping onto metal housings, including sealing ring

Ordering No.E0.022.02

Plastic protection capsuitable for extensions, receptacles

Ordering No.8A.002.00

Metal protection capAxial sealing, incl. wire cable

suitable for extensions, receptacles

Ordering No.8B.011.01

Metal protection capAxial sealing, incl. wire cable

suitable for plugs

Ordering No.8B.013.01

STANDARD

78A 79A

A 0 0 0

Packaging A SERIES

Standard packaging code: 000

Standard packaging for connectors or connector components: cardboard box (various sizes depending on units packed).

Customer specifi c packaging designs including mounting instructions, e. g. service packs, on request (see picture).

Intercontec Produkt GmbH

Bernrieder Strasse 15

D-94559 Niederwinkling

Tel. +49 (0)9962 - 2002-0

Fax +49 (0)9962 - 200270

Email: [email protected]

http://www.intercontec.biz

© 2002-2003 INTERCONTEC

Technical data may differ or change without notice

INTERCONTEC is not responsibility for data misprints

PDF fi le generated 26/03/03

desi

gn: w

ww

.kat

hede

r.com

Documents

STANDARD Signal Circular Connectors - RELO … · A16 A17 A xx xx xx xxxx 000 510 165 163 164 P type, 16 contacts Insulation inserts 12 contacts STANDARD Coding groove