Input Voltage : 230V AC (180V-270V varying) 50Hz. ± 3Hz., 1 Phase

Battery Voltages Test range : 1V / 2V / 6V / 12V or 24V DC

Discharge Current Range : 0.2 to 50A settable with a potentiometer

Current Regulation : Within ± 1% of full rating

Current Setting Accuracy : Within ± 0.2A

Battery Cut-off : Settable for 6V, 12V and 24V/28V independently up to second

decimal point through keypad including single cell

Protection : Reversal of Battery under test.

: Single Cell reversal

: Battery Deep Discharge

: Unit Failure (by using a fuse)

: Batt. Wrong selection

: Over Temperature

Metering : Digital Voltmeter 4½ digits, accuracy 0.5% of FSR

: Digital Ammeter 4½ digits, accuracy 0.5% of FSR

Standby Battery : Provision for connection of 12V/40AH standby battery externally.

* The above Parameters are subject to change without prior notice due to continuous improvement in

technology.

The equipment uses solid state load and microprocessor based controller to monitor the

voltages, currents and displays. V, I and AH (Ampere-Hour capacity) of the secondary battery.

No separate timer is required to record and multiply with current. It has universal usage i.e. it can

be used for any type of Battery, be it Ni-Cd or Lead Acid. Both rate of discharges as well as end

of discharge voltages can be selectable to test a Battery for different applications. Facility is

provided to discharge even single cell of Ni-Cd, or Lead Acid cell. It is a highly versatile unit.

TECHNICAL SPECIFICATION

AUTOMATIC BATTERY CAPACITY TESTER

Statcon Electronics India Limited

Automatic Capacity Tester is fully

solid state portable equipment

designed to test the capacity and

thus reliability of an Battery. It can

also be design to test other special

type of Batteries. It is specially

designed to test both new as well as

the battery under use.

Statcon Electronics India LimitedA-34, Sector-59, Noida, G.B.Nagar - 201301

Ph.: +91-120-3356101 Fax: +91-120-3356121E-mail:info@sindia .co.in, Web: www.sindia.co.in