Steps to check the E1 in case of Abis Optimization

Table of Contents:

Check the SCGR connected to the TG ........................................................................... 2

Check the SC and the Device connected to the SCGR ................................................... 3

Get the SNT that contains the specified device(s) .......................................................... 3

Get the RBL from the SNT ............................................................................................. 4

Check the RBL status...................................................................................................... 4

Check the SCGR connected to the TG

You can use command RXMOP to check the SCGR connected to the TG.

Check the SC and the Device connected to the SCGR

You can use command RRSCP to get the number of SC connected and the device specified for

each SC.

Get the RBL from the SNT

Use command NTCOP to get the RBL connected in this SNT

COMMAND SUMMARY

RXMOP:MO=RXOTG-2; RRSCP:SCGR=2; RADEP:DEV=RBLT2-65; NTCOP:SNT=ETM2-4; DTSTP:DIP=2RBL2;

Hope you find this KO useful.

For any help please contact me on

moataz.yousry@ericsson.com

MOATAZ YOUSRY

mailto:moataz.yousry@ericsson.com