Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
CHELTENHAM seating
UK street furniture designers & manufacturers
Street Designestablished in 1986
Street Design Limited Contact us
01509 81533501509 [email protected]
Telephone:Fax:Email:Web site:
Unit 47, Hayhill Industrial EstateBarrow upon SoarLeicestershireLE12 8LD
As UK based, designers and manufacturers,Street Design can manufacture and supplyCheltenham seating to suit your specificrequirements.
Straight benches and seats can bemanufactured. We can also supply 500mmlong, individual benches and tables.
Choose from a range of material and finishes.
Choose from a range of accessories to ensurethat the Cheltenham seating is manufacturedto suit your specific scheme.
Cheltenham bench product details
Cheltenham seat product details
Cheltenham material finishes
Cheltenham accessories
Cheltenham technical specification
Cheltenham bench and seat in natural finish FSC iroko hardwood with galvanised and powder coated frames
Cheltenham care & maintenance Ref: 01/A
Street Design LimitedUnit 47Hayhill Industrial EstateBarrow upon SoarLeicestershire LE12 8LD
Contact us:Telephone:Fax:Email:Web site:
01509 81533501509 [email protected]
Cheltenham bench innatural finish FSC irokohardwood slats withgalvanised mild steellegs with optional blackpolyester powder coatedfinish
Cheltenham bench in natural finish FSC iroko hardwoodslats with dull polished stainless steel legs
Overall dimensions
Installation options
PRODUCT DETAILS
Cheltenham bench without back
Cheltenham bench in naturalfinish FSC iroko hardwoodslats with galvanised mildsteel legs with optional greypolyester powder coatedfinish
The Cheltenham bench consists of timber benchslats bolted onto tubular metal legs. Cheltenhambenches can be installed above or below groundlevel.The bench is available with a choice of materialsand finishes to suit your scheme and budget.
Slats - can be either FSC treated redwood orFSC iroko hardwood.Tubular bench legs - can be either mild steel orstainless steel.
Timber - as standard, will be supplied with anatural finish.Mild steel - as standard, will be supplied with ahot dip galvanised finish.Stainless steel - as standard, will be supplied witha dull polished (brushed) finish.
Choose the seat lengths, material, finishes andinstallation type.
Choose from optional anti-skating studs and LEDlighting.
The benches will be factory assembled anddelivered to site fully assembled, for off-loadingand placing in position.
Materials
Finishes
Options
Accessories
Delivery
Above ground installationThe assembled Cheltenham bench willbe secured to the finished ground levelwith suitable fixings for the surface type.
Below ground installationThe assembled Cheltenham bench will be
set into concrete foundations500x400x400mm deep.
CHELTENHAM seating
FGLFGL
Ref: 10/A
Street Design LimitedUnit 47Hayhill Industrial EstateBarrow upon SoarLeicestershire LE12 8LD
Contact us:Telephone:Fax:Email:Web site:
01509 81533501509 [email protected]
Cheltenham seat in natural finish FSC iroko hardwood slatson dull polished stainless steel frame
CHELTENHAM seating
Cheltenham seat with back Overall dimensions
Installation options
PRODUCT DETAILS
The Cheltenham seat consists of timber seatslats bolted onto a tubular metal frame withintegral armrests. Cheltenham seats can beinstalled above or below ground level.The seat is available with a choice of materialsand finishes to suit your scheme and budget.
Slats - can be either FSC treated redwood orFSC iroko hardwood.Tubular seat frames - can be either mild steel orstainless steel.
Timber - as standard, will be supplied with anatural finish.Mild steel - as standard, will be supplied with ahot dip galvanised finish.Stainless steel - as standard, will be supplied witha dull polished (brushed) finish.
Choose the seat lengths, material, finishes andinstallation type.
Choose from optional anti-skating studs and LEDlighting.
The seats will be factory assembled anddelivered to site fully assembled, for off loadingand placing in position.
Materials
Finishes
Options
Accessories
Delivery
Above ground installationThe assembled Cheltenham seat
will be secured to the finishedground level with suitable fixings for
the surface type.
Below ground installationThe assembled Cheltenham seat will
be set into concrete foundations500x400x400mm deep.
Cheltenham seat in natural finish FSC iroko hardwood slatson galvanised and powder coated mild steel frame
FGL FGL
Ref: 11/A
CHELTENHAM seating
TECHNICAL SPECIFICATION
Street Design LimitedUnit 47Hayhill Industrial EstateBarrow upon SoarLeicestershire LE12 8LD
Contact us:Telephone:Fax:Email:Web site:
01509 81533501509 [email protected]
Construction
Assembly
Materials
Options
Fixings
Security Fixing
Samples
All fixings will be mild steel M10 size and have abright zinc plated finish.
All bolts will be fitted with a M10size Kinmar security nut to preventunwanted removal.
Material samples are available on request.
Cheltenham benches and seats aremanufactured to order. Before we canmanufacture the seating, we need to know thefollowing:• seating lengths• materials• material finishes• accessories required• installation type required
Depending on the size, Cheltenham benches andseats are delivered to site fully assembled for off-loading, ready for installation.
Dimensions
Plan dimensions:
Overall height :
Sitting height :
BenchSeatOther lengths are available on request.
(above FGL)BenchSeat
(above FGL)BenchSeat
1721mm long x 460mm overall width.1812mm long x 840mm overall width.
450mm840mm (to top of back slat)
450mm high.400mm high.
The Cheltenham seating design consists oftimber bench or seat slats bolted onto a tubularmetal frame.The timber bench and seat slats aremanufactured using FSC timber. The slats are145x45mm and 70x45mm section.The mild steel frames are manufactured from60.3mm Ø mild or stainless steel CHS, with60x5mm mild or stainless steel flat.
General specification
Guarantee
All seats and benches are guaranteed for 15years minimum. This guarantee is a minimumand is dependant on the product not beingmisused or abused. All the materials, treatmentsand construction will allow for a life expectancyconsiderably longer than this.
Product prices
See separate price list for the product prices ofstandard sizes, materials and finishes. The pricelist excludes delivery and off-loading prices.
Timber slats
Frames and legs
The bench and seat slats are manufactured usingeither FSC treated European redwood or FCSiroko hardwood.
The bench frames and legs are manufacturedfrom mild steel or grade 304 stainless steel(grade 316 stainless steel is available onrequest).
Materials - continued
Circular Cheltenham bench Cheltenham seat
Construction
Assembly
Timber policy
Materials
Finishes
All Street Design products are designed and manufactured using only quality,durable materials, construction details and fixings, to provide a long-lasting,durable product with a good life expectancy.
Unless otherwise stated all Cheltenham seating products will be supplied fullyassembled, ready for installation.
All iroko hardwood products are manufactured using materials obtained fromgrowers who operate under the Forest Stewardship Council (FSC).
Hardwood products are constructed from FSC iroko hardwood, from sustainablesources.All mild steel fabricated components will be hot dip galvanised after fabrication toBS EN ISO 1461:2009.All stainless steel fabricated components will be grade 304. Grade 316 can bespecified if the location or project requires it.
As standard, the FSC timber slats will be left natural to reduce the need for re-staining and help reduce maintenance costs. As an optional extra, the timber slatscan be supplied with a stained finish using 3 coats of quick drying, water basedwood stain. The standard colour will be teak. Other colours and stain types areavailable upon request.As standard, the mild steel components will be left with a galvanised finish. As anoptional extra, after hot dip galvanising, the mild steel components can bepolyester powder coated, to the colour of your choice. The galvanised parts areprepped, treated and sprayed with the polyester powder, before being baked in anoven.Stainless steel components will have a dull polished (brushed) finish. If required,the stainless steel components can be supplied with a mirror polished finish.
All mild steel fixings will be bright zinc plated, and all stainless steel fixings will beA2 (grade 304). A4 (grade 316) can be specified if the location or project requiresit.
Ref: 12/A
CHELTENHAM seatingStreet Design LimitedUnit 47Hayhill Industrial EstateBarrow upon SoarLeicestershire LE12 8LD
Contact us:Telephone:Fax:Email:Web site:
01509 81533501509 [email protected]
ACCESSORIES
Cheltenham seating - with optional anti-skateboard fittings, in stainless steel with adull polished finish, fixed to natural irokohardwood slats.
LED Lighting
Anti-skateboard studs
We are able to supply the benches and seatswith stainless steel anti-skateboard fittings. Thefittings are screwed to the outside edges of the145x45mm section FSC timber slats.
Cheltenham seating - with whiteLED lighting fitted to the undersideof the seating slats.
Coloured LED lighting can be supplied with yourCheltenham seating.In its basic form, the lighting is available as coolwhite, warm white, blue, green or red LED units.More complex lighting can be supplied, includingtwilight switches, PIR sensors, timers, infrared,ultraviolet and royal blue emitters, PWMdimmers, RGB, UPS, DMX and remote controlunits.Our LED lighting units can handle all of the tasksformerly undertaken by tungsten, halide andfluorescent lamps, and out-perform them in everydepartment. They are extremely flexible - we cansupply almost any configuration of lighting to aclient's specification using our standard lightingunit.The lighting units can be powered by either a lowvoltage DC supply or mains electricity. The choiceof light levels and power units is also broad. Ourstandard power supply pumps out 12 Volts at 4Amps, in LED terms enough for a very brightbench or seat. The entire range is from 1 Watt to1,000 Watts.
Cheltenham seating - with blue LEDlighting fitted to the underside of theseating slats.
Ref: 20/A
MATERIAL FINISHES
Street Design LimitedUnit 47Hayhill Industrial EstateBarrow upon SoarLeicestershire LE12 8LD
Contact us:Telephone:Fax:Email:Web site:
01509 81533501509 [email protected]
As standard, all Cheltenham FSC treatedredwood seating slats, will be supplied with anatural finish. The timber is treated for a minimumlife expectancy of 30 years. Left to weathernaturally, the timber will eventually turn a silvergrey colour.
Optional FSC treated redwood finish
As an optional extra, the FSC treated redwoodcan be supplied with a stained finish. Thestandard stain will be 3 coats of Ronseal quickdrying water based stain. The standard colour willbe teak. Other stains and colours can be appliedupon request.
CHELTENHAM seating
Standard stainless steel finish
As standard, the stainless steel tubular frame andlegs will be supplied with a dull(brushed) finish.
polished
Standard FSC treated redwood finish
Dull polished
Natural treated redwood slats
Bench and seat frame
Standard mild steel finish
Optional mild steel finish
Galvanised
Bench and seat slats
Galvanised and powder coated
Natural iroko slats
Agednaturaliroko
Stained iroko slats
Teak stain
As standard, all Cheltenham FSC irokohardwood seating slats, will be supplied with anatural finish. Left to weather naturally, thetimber will eventually turn a silver grey colour.
Optional FSC iroko hardwood finish
As an optional extra, the FSC iroko hardwoodcan be supplied with a stained finish. Thestandard stain will be 3 coats of Ronseal quickdrying water based stain. The standard colour willbe teak. Other stains and colours can be appliedupon request.
Standard FSC iroko hardwood finish
Stained redwood slats
Agednaturaltreatedredwood
Teak stain
As standard, the mild steel tubular frame andlegs will be hot dip galvanised.Other than cleaning, the galvanised steel willrequire no other maintenance.In time, the bright, silvery zinc coating will dulldown with the affects of aging and weathering.
As an optional extra, the mild steel tubular frameand legs can be polyester powder coated aftergalvanising. Depending on the stock availability,the polyester powder coating can be to anyspecified RAL colour and can have either a matt,satin or gloss finish.In time, the powder coated finish may require re-painting. This will be brush applied wet paint,applied on site. The paint should match both theRAL colour and the gloss level originallyspecified.
Ref: 30/A
CARE & MAINTENANCE
Street Design LimitedUnit 47Hayhill Industrial EstateBarrow upon SoarLeicestershire LE12 8LD
Contact us:Telephone:Fax:Email:Web site:
01509 81533501509 [email protected]
Natural finish treated redwood can be washed down with a mild detergent.More stubborn surface marks can be removed with a light, hand sand with a120 grit, or higher grade sandpaper. Excessive sanding should be avoided.
Maintaining the optional FSC treated redwood finish
Stained, treated redwood will need to be re-coated after a period of time.The stain can either start to fade, become dull (oxidised) or incur somesurface break up. Lightly sand down the timber using a 120 grit, or highergrade sandpaper. We recommend that the timber is re-stained with theoriginal stain colour and manufacturer. Details can be obtained from Streetdesign Limited. Apply the stain evenly, with brush strokes running parallelwith the woodgrain, in thin layers, building up the finish as recommended bythe stain manufacturer.
CHELTENHAM seating
Maintaining the standard stainless steel finish
Dull polished (brushed) stainless steel should be washed down with clean,warm water with a mild detergent. More severe marks can be removed by usinga fine abrasive, such as a Scotchbrite or stainless steel scouring pad. As dullpolishing is a process of applying fine linear scratches evenly over the surface,it is extremely important that rubbing down with a abrasive pad is done carefullyin a straight line parallel to the existing grained finish. Rust marks or stains areusually caused by environmental contamination from dissimilar materials laidagainst, or near to, the stainless steel. These stains can be removed asdescribed above.
Maintaining the standard FSC treated redwood finish Maintaining the standard mild steel finish
Maintaining the optional mild steel finish
Hot dip galvanised mild steel is a very durable and hard wearing finish. Dirt canbe washed off with warm water and a mild detergent. Always use clean waterand cleaning cloths to avoid surface contamination.After cleaning, any severe marks can be over painted with a cold galvanised,(zinc rich) aerosol spray.
Polyester powder coated finishes should be washed down with clean warmwater and a mild detergent. Minor touching up can be done with an aerosol tomatch the original powder coated colour. Details can be obtained from StreetDesign Limited. More severe damage can be repaired by sanding down, bymanual or mechanical means, beyond the damaged area, sufficiently far as toensure that any step in the powder coated finish is removed. This will ensurethat after re-finishing the repair will be difficult to detect.
General
Maintaining the optional FSC iroko hardwood finish
Maintaining the standard FSC iroko hardwood finish
All Cheltenham seating products are manufactured using high quality materials, treatments andfinishes. The timber slats are manufactured from either FSC treated redwood or FSC irokohardwood. The fully welded mild steel legs and armrests will be hot dip galvanised after fabrication.The fully welded stainless steel will be supplied with a dull polished finish. All products require avaried amount of maintenance, depending on the environment, usage and weather conditions.Natural timber, galvanised steel and stainless steel will only require cleaning. In time, stainedtimber and powder coated mild steel will require re-coating.
Natural finish iroko hardwood can be washed down with a mild detergent.
More stubborn surface marks can be removed with a light, hand sand with a
120 grit, or higher grade sandpaper. Excessive sanding should be avoided.
Stained, iroko hardwood will need to be re-coated after a period of time. Thestain can either start to fade, become dull (oxidised) or incur some surfacebreak up. Lightly sand down the timber using a 120 grit, or higher gradesandpaper. We recommend that the timber is re-stained with the originalstain colour and manufacturer. Details can be obtained from Street designLimited. Apply the stain evenly, with brush strokes running parallel with thewoodgrain, in thin layers, building up the finish as recommended by the stainmanufacturer.
Ref: 50/A