SUPPL YING THE BA Y AREA WITH THE FINEST BUILDING …cdn.thomasnet.com/ccp/00598598/73854.pdf · suppl ying the ba y area with ... al though we ha ve tried t o appro xima te as cl

Main Showroom at: 2525 Marin Street (at Bayshore) San Francisco, CA 94124 Tel: (415) 824-4300 Fax: (415) 824-3706

Business Hours: Monday–Friday 6:00 am - 4:30 pm Saturday 8:00 am - 2:30 pm

Window & Door Showroom at:196 Napoleon StreetSan Francisco, CA 94124Tel: (415) 824-0621Fax: (415) 824-7564

Business Hours:Monday–Friday 7:00 am - 4:30 pmSaturday 8:00 am - 2:30 pm

QUALITY PRODUCTS OFFERED BY BERONIO LUMBER

SUPPLYING THE BAY AREA WITH THE FINEST BUILDING MATERIALS SINCE 1911

• Decking • Paneling

• Fencing • Shingles

• Finish Lumber • Siding

• Flooring • Stair Parts

• Framing • Windows & Doors

• Hardwood Flooring • Wainscot Moulding

ALTHOUGH WE HAVE TRIED TO APPROXIMATE AS CLOSELY AS POSSIBLE THE ORIGINAL COLOR OF THE WOOD, NATURAL COLOR VARIANCES WILL EXIST WHEN COMPARED TO THE ACTUAL PRODUCT. THERE ARE NO REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED OF ANY KIND WHATSOEVER, INCLUDING BUT NOT LIMITED TO REPRESENTATIONS OR WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OF MERCHANTABILITY, WHICH EXTENDED BEYOND THE DESCRIPTION OF THE FACE HEREOF. SELLER’S LIABILITY SHALL BE LIMITED TO REPLACEMENT OR RESCISSION AT ITS SOLE ELECTION AND IN NO EVENT WILL SELLER BE LIABLE FOR CONSEQUENTIAL OR PUNITIVE DAMAGES. ANY REPRODUCTION OF THIS CATALOG IN WHOLE OR IN PART, OR ANY OTHER UNAUTHORIZED USE WITHOUT THE EXPRESS PERMISSION OF THE BERONIO LUMBER COMPANY IS PROHIBITED.

Abrasives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Adhesives/Caulks/Wood Putties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Epoxy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Fasteners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Dowels/Plastic Sheeting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

Building Paper/House Wrap/Flashing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

Floor Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

Wood Coatings/Finishes/Sealers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

Builder’s Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

Gate Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

Door Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67

Z Bar/L Metals/Aluminum Flashing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

Vents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71

Drywall Metals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72

Deck Fastening Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74

Simpson Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78

Simpson Stainless Steel Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99

Simpson Stainless Steel Fasteners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102

Safety Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103

Sundries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109

Hand Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121

Tool Pouches and Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138

Handrail Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .141

Edge Banding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142

Shelving Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142

Power Tools and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145

Air Tools and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .177

Paslode Tools and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .182

Concrete and Stucco Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184

Rebar/Related Tools and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .187

Moisture Meters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .190

Electrical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .192

Stair Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .195

Stair Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .197

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .i–iv

TABLE OF CONTENTS

415-824-4300

PRODUCTION PAPER SHEETSFor wood and metal sanding. Stands up to heavy sanding heatand pressure. Open-coated withtough, hard aluminum oxidemineral. Tan in color.

Size Grit Qty Code

9”x11” 36D EA HW025650D HW024080D HW0224100C HW0211120A HW0208220A HW0182

DRYWALL SANDING SHEETS• 35⁄16!x11! pre-cut sheets.

• Extra sharp silicone carbidegrit.

• Designed for quick and easyattachment.

• Can not be used with theVacuum Drywall Sander.

ABRASIVES

1415-824-4300

SANDING BELTSAluminum oxide cloth belts.Combination closed/open coat to resist loading. Excellent forhardwood, plywood and particleboard.

Size Grit Qty Code3”x 21” 60 EA HW2106

80 HW2108100 HW2110120 HW2112

3”x 24” 60 HW240680 HW2408100 HW2410120 HW2412

4”x 24” 60 EA HW420680 EA HW4208100 EA HW4210120 EA HW4212

DRYWALL SANDING SCREEN• 35⁄16!x11! pre-cut sheets.

• Impregnated with silicone carbide grit.

• Non-clogging, open mesh isreversible and can be rinsedout in cold water.

• Designed for use with theVacuum Drywall Sander.

Grit Qty Code

80 5/PK HW0161120 5/PK HW0163

Grit Qty Code

100 2/PK HW0150150 2/PK HW0160

DRYWALL SANDING SCREEN

SANDING SPONGE• Rinse and reuse.

• Use wet or dry.

• Wood, Paint, metal, plastic,and drywall.

Size Grit Qty Code

33⁄4”x25⁄8”x1” xfine/fine EA HW0100med/fine EA HW0101

med/coarse EA HW0102

INDUSTRIAL ABRASIVE DEPRESSEDCENTER WHEELSIndustrial grade grinding wheel for heavy dutycutting, grinding and material removal applications.Double reinforced with industrial grit and gluefor increased life and faster cuts.Superior friability increases sharpness for longer life.Ideal for low angle and vertical griding inmetal/masonry materials.

Size Type Qty Code

41⁄2” Metal EA DW4514Masonry DW4524

ABRASIVES

2 415-824-4300

ABRASIVE CUTOFF WHEELS REINFORCED TYPE 1For general purpose cutting with low to medium powered machines.

Size Type Qty Code41⁄2” Flat EA DW3501

Depressed Center DW35025” Metal DW4526

Masonry DW45337” Metal DW3511

Masonry DW352110” Metal DW800514” Metal DW8001

RESIN FIBER 41⁄2” DISCAbrasive disc for angle grinders and sanders.

Size Grit Qty Code41⁄2” 36 5EA DW4535

60 DW453780 DW4539

PSA CLOTH DISCSPressure sensitive, adhesivebacked 5” with 8-hole vac.

Size Grit Qty Code Qty Code5” 40 EA HW2030 50EA HW2060

60 HW2035 HW206580 HW2040 HW2070120 HW2045 HW2075180 HW2050 HW2080

HOOK & LOOP SANDING DISCSFOR VACUUM SYSTEMS5! Gold hook & loop sandingdiscs with 8-hole vac.

Size Grit Qty Code Qty Code5” 60 EA HW2005 50EA HW1040

80 HW2010 HW1041100 HW2012 HW1042120 HW2015 HW1043150 HW2018 HW1044180 HW2020 HW1045220 HW2022 HW1046240 HW2026 HW1047320 HW2027 HW1048

RUBBER BACKING PADFor use with Resin Fiber 41⁄2” Disc.

Size Qty Code5⁄8! -11”x41⁄2” EA DW4945

FRANKLIN™ WATERPROOF TITEBOND® II WOOD GLUENew water proof Titebond® II is the new generation of wood gluesthat are formulated with a uniquepolyaliphatic resin polymer calledDuracet™ XTII. This polymer offerswoodworkers better performancethan original Titebond®, plus theType II water resistance hasunsurpassed heat resistance,sands easier, sets faster and ispaintable. Easy water clean up,plus it is freeze thaw stable.Excellent for all porous materials.

Size Qty Code8OZ EA 92GX0816OZ 92GX161GAL 92GX1G

GORILLA™ PREMIUM GLUEEasy to use. Incredibly strong. Will bond ceramics, plastics,metal, softwoods, hardwoods,teak and other woods withoutany special preparation or resin removal. Gorilla™ Glue is an ideal all-purpose household glue. Alongwith its superior strength andversatility, consumers appreciateGorilla™ Glues environmentallyfriendly, 100% solvent freeformula. Carcinogen Free.

Size Qty Code8OZ EA 92GG0818OZ 92GG18

ADHESIVES/CAULKS/WOOD PUTTIES

3415-824-4300

AZEK™ ADHESIVE• Water-based, non-toxic, easy

cleanup.

• Perfect for AZEK to AZEKadhesion.

• Glued joints will never open.

Size Qty Code16OZ EA 1AZEA08

TITEBOND III ULTIMATEWOOD GLUE Size Qty Code

16OZ EA 92GU161GAL EA 92GU1G

Titebond III Ultimate Wood Glue offers thebest possible performance in woodworkingglues. This waterproof formula providessuperior bond strength, longer openassembly time and lower applicationtemperature. The perfect choice for Interiorand exterior woodworking. • Passes ANSI/HPVA Type I

water resistance. • FDA approved for indirect food contact.• Sands easily• Water cleanup and non-toxic.

PL 400™ HEAVY-DUTY SUB-FLOOR ADHESIVEPL 400™ construction adhesive isan indoor / outdoor syntheticrubber adhesive for bondingplywood subfloors to wood floorjoists. This excellent field-appliedadhesive makes a flooring systemthat is less expensive thannon-glued systems and isstronger, stiffer and quieter.

MELAMINE GLUE “ROO-CLEAR”®

Melamine “Roo”® Glue isspecifically made for bondingmelamine coated boards. Makesbutt joints stronger than theboard‘s surfaces. Driestranslucent (clear). Water basedand non-toxic. 16 years in use;proven long term.


4 415-824-4300

DAP BUTYL-FLEX®

GUTTER & FLASHINGRUBBER ADHESIVELasts up to 5 times longer than oilbased caulks. No paintingrequired. USDA authorized use forfederally inspected meat &poultry plants. Meets Fed. Spec.TTS-001657, Type I, CID-A-A-272. Type III.

Size Color Qty Code10OZ White EA 92CBUW

Size Qty Code10.2OZ EA 92PL1029OZ EA 92PL29

3M™ #90 AEROSOL ADHESIVEExtra strength, industrial gradeaerosol adhesive. Fast bondingaction permits quicker handling ofparts to speed assemblyoperations. Two-surface adhesivequickly and securely bondsdifficult to hold materials such aslaminates and polypropylene. Thespray pattern directs the adhesiveright where you want it. Theadjustable spray tip lets you varywidth and delivery rate.

Size Qty Code16.5OZ EA 923M90

Size Qty Code16OZ EA 92GM161GAL 92GM1G

CONTACT CEMENTSmooth spreading grade,maximum strength, waterproof,fast drying. Neoprene and resinformulation provides maximumstrength and toughness.Permanently bonds laminates towood, plywood, hardboard, metal,or plaster. Heat resistant andwaterproof. Fast drying. Tan color.

Size Qty Code1GAL EA 92ACON

1–15 minute bonding range at roomtemperature. Resistance: 160ºF.Translucent in color.

PL 400™ can be used on all types of wood,treated lumber, ceramic tile, including subfloors,stair treads, slate floors, paneling, wood floors,furring strips, decks and patios, wallboard, andlap siding.VOC approved latex based.


5415-824-4300

DAP™ FIRE STOP SEALANT• Classified for sealing around

plumbing and wiring.

• Penetrates through fire ratedwalls and floors.

• One part silicone.

• Crack resistant.

• Non slumping.

• Not for fireplaces.

Size Color Qty Code92CFIR

PHENOSEAL™ ADHESIVE CAULKThe phenolic-vinyl caulkingadhesive rugged, permanentlyflexible, heat resistant andwaterproof. Phenoseal™ bondswood, tile, metal, glass,fiberglass, stone, almost anymaterial to any other material.Forms wood joints stronger thanwood itself. Does not crystallize orcrumble. Completely unaffected byexposure to sunlight, salt, water,gasoline, oil, mild acids, andalkalis. Water based andenvironmentally safe.

Size Color Qty Code10OZ Transparent EA 92CPHT

White 92CPHWDark Brown 92CPHR

EXTEND HD SEALANT• Extend DH is a thermoplastic sealant

comprised of flexible rubbers and resins. Itoffers excellent adhesion to most buildingmaterials and It’s exterior performance isenhanced by a stabilizer package to resistU.V. degradation.

• For use on Fiber Cement siding.

• OSB • Metals

• Vinyl • Hardboard

• Pressboard • Siding

Size Color Qty Code10.5OZ White EA 92CEXT

DAP™ “230” SEALANTSilicone performance with latexoffer ease of use. It is the first latexsealant to withstand 50% total jointmovement. Outperforms silicone inoverall performance. Permanentadhesion, lifetime flexibility and 50year durability. Paintable. Watercleanup. Every color meets theperformance requirements of Fed.Spec. TT-S-00230C, Type II, Class A.

Size Color Qty Code10.5OZ White EA 92C23W

Alum Grey 92C23GBronze 92C23B

SURPRESS ACOUSTICAL SEALANTUse Supress Acoustical Sealantat panel edges and around anycut-outs for electrical boxes,pipes, sprinklers, etc.

SIKAFLEX-1a™

Sikaflex-1a is a 1 component, moisture-cured,non-sag, permanently flexible polyurethanesealant that is self-priming with mostconstruction materials. It has demonstratedexcellent resistance to aging and weathering invaried climates around the world. It resistsattack from dilute acids and alkalines, jet fuel,water, and residential sewage. Curing to a flexible consistency with exceptionalcut and tear resistance, Sikaflex-1a™ offerssuperior performance when used betweenelements with dissimilar coefficients ofexpansion: concrete, wood, glass, steel,aluminum, copper, ceramics, brick, asbestos,cement, polyester and epoxy.


6 415-824-4300

Size Color Qty Code10.3OZ White EA 92CSEW

Bronze 92CSEBGrey 92CSEGTan 92CSET

Black 92CSEBL

Size Qty Code29OZ EA 4007SL

LEXEL®

The ultra-clear caulk in a see-through tube. New technologybeyond silicone. It’s clearer,tougher, and stronger thansilicone. Firmly binds to almostany surface. Paintable andmildew resistant. Available inclear and white.

Size Color Qty Code10.5OZ Clear EA 92CLXC

White 92CLXW

DOW CORNING™ SILICONE SEALERSWith a limited lifetime warranty,the 100% silicone sealantprotects and seals with 100%silicone rubber. Waterproof andweatherproof. Won‘t crack,crumble or dry out. Meets Red.Spec. TT-S-001543A, Class A.Meets requirements of FDARegulation Number 21 CFR177.2600. CID-A-A-272. Type IV.

Size Color Code10.1OZ Clear 92CSIL


7415-824-4300

ALEX PLUS™ ACRYLIC LATEXWITH SILICONESuperior quality, moisture/mildewresistant caulk. Lasts for 25 yearsor more. Paintable. USDAauthorized for federally-inspectedmeat and poultry plants. ExceedsASTM. C-834-76, CID-A-A-272,Type II.

Size Color Qty Code10.1OZ Almond EA 92CLAL

Black 92CLBLBrown 92CLBR

Cedar Tan 92CLCEClear 92CLCL

Slate Gray 92CLSGWhite 92CLWH

BLACK JACK FIBERED PLASTIC ROOF CEMENT, WET OR DRYWaterproof. Forms a tight, strongseal. As easy to use on dry asdamp surfaces.

Size Qty Code1GAL EA 93WET15GAL 93WET510OZ tube 93WET2

PROTECTO SEALANT 25XLPOLYURETHANE WINDOWAND DOOR INSTALLATIONSEALANTProtecto Sealant 25XL is a highperformance, low modulus, one-comonent, moisture curing,polyurethane sealant. ProtectoSealant 25XL is a waterproofsealant that offers excellentperformance for back bedding nailflanges for window and doorinstallation and sealing doorthresholds. Protecto Sealant 25XLis used exclusively with the newProtecto Sill Drainage System.

Size Color Qty Code11OZ White EA 92CPS25

FFeeaattuurreess• 100% compatible with Protecto Wrap window and

door sealing tape• Aggressive adhesion to a variety of window

substrates including wood, vinyl and aluminum• Provides a strong, durable, weather resistant bond to

most building substrates• Mold and UV resistive• Fast cure and solvent free formulation• Excellent long-term weather resistance• Meets AAMA and ASTM sealant standards

DEVCON’S TRIMBONDER™AZEK Trimboards has aligned withDevcon, a leading industrialadhesive manufacturer, in thepromotion of their uniquetwo-part strucural acrylicashesive “TrimBonder”.

TrimBonder is a perfect solutionto filling nail holes and gaps inAZEK applications. TrimBondercan also be used to join sectionson AZEK products together or to

Qty Case Qty CodeEA 6 92CAZEKEA 10 92NAZEK

AAppppll iiccaatt iioonnss• Fills nail holes• Fills gaps & joints• Bonds all AZEK Trimboard products

bond AZEK material to other substates. Applied with a regular caulkgun, TrimBonder is durable, permanent, UV stable, waterproof, andcan withstand harsh weather without shinking, discoloring oryellowing. An adhesive that permanently bonds AZEK Trimboards,metals, wood, and PVC.

FFeeaattuurreess• Fits standard caulking gun• Easily sands & paints well• UV stable & waterproof

JIFFY SEAL MEMBRANE PRIMER #100• #100 primer is a high tack

SBS rubber base primer.

• It is used on all verticalsurfaces before application ofmembrane and on all surfaceswit temperatures between25˚F and 40˚F.

• Coverage is 125-225 sq. ft.

JIFFY SEAL MEMBRANE PRIMER #80• #80 primer is an asphalt base

primer for use on all horizontalapplications above 40˚F.


Size Color Qty Code1GAL EA 91JS80

Size Color Qty Code1GAL EA 91JS90


8 415-824-4300

CAULKING GUNSEconomy ratchet style guns with enamel finish to fit standard size tubes.

Size Length Qty Code11OZ 9” EA 92CG1130OZ 13.5” EA 92CG30

QUIKRETE® NO.9902 CONCRETE BONDING ADHESIVE (LATEX)Penetrates pores of old concrete,forming a chemical bond for newconcrete. Roughing old surfaces is unnecessary.

Size Qty Code1QT EA 91WAD111GAL EA 91WAD12

JIFFY SEAL CAULKJ.S.-160H MASTIC• SBS rubber modified.• Heavy duty, cold applied

bituminous coating.

Size Color Qty Code10.5OZ EA 91JS160


9415-824-4300

DAP™ KWIK FOAM® INSULATINGSEALANTA one component, moisture cure,polyurethane foam insulation thatexpands to economically fill andseal large cavities. It stops airinfiltration and will not degrade orshrink. Kwik Foam® contains aflame retardant and meetsMontreal Protocol 1987.

Size Qty Code20OZ EA 90FOAM

DAP™ FAST‘N FINAL®

ALL-PURPOSESpecially formulated for outdooruse. Lightweight. One fill, nosanding. Won‘t crack or shrink.Repairs stucco, concrete, brickand wood.

Size Qty Code1QT EA 92ASPA

DUROCK™ ADHESIVEWater-based mastic for ceramic andmosaic tile installation on interiorwalls. High strength, water-resistant,non-slip formula for use on wallboard,wonderboard, exterior grade plywood,hardboard and masonry surfaces. Easytrowelability and clean-up.

Size Qty Code1QT EA 94TTIQ1GAL 94TTIG

TEC EZ LEVEL TA323• Self leveling underlayment.• Pourable, Latex-modified self-

leveler. Ideal for large areas.• For ceramic, natural stone,

marble tile, carpet, and wood.• Pour, pump, squeegee, or

guged spreader.• Interior use.• Must use TA 861 primer.

See instructions.

Size Code50lb sack 92ATEC

TEC SURFACE PREP & PRIMER TA 861• Acrylic latex based primer and

patch additive.• Improves adhesion and bond

strengths and flexural strengths.• Provides freeze/thaw resistance.• Approved for exterior use.• Must be used with EZ Level

compound TA323.• Covers 300–500 sq. ft.

Size Code1GAL 92ATEC1

SEALANT


10 415-824-4300

FIXALL®

FIXALL® is used to repair cracksand holes in plaster, gypsumwallboard and wood surfaces. Ithas high compressive strengthand, therefore, makes anexcellent floor under-layment forpatching and leveling prior toinstallation of resilient floor-coverings. In addition, it can beused for models and in molds.

WOOD PATCHAn all purpose highly effectiveplastic putty for wood repair.Accepts all stains and finishes.Patches hole and surface cracks in all woods.

Size Color Qty Code4OZ Birch EA WF006B4OZ Maple WF006M4OZ Red Oak WF006O4OZ Redwood WF006R4OZ White WF006W16OZ Birch WF012B16OZ Maple WF012M16OZ Red Oak WF012O16OZ Redwood WF012R16OZ White WF012W

Size Qty Code4.5# EA 92AFIX25# EA 92AFIZ

DOW GREAT STUFF®

BIG GAP FILLER SEALANTTriple expanding polyurethaneinsulating foam sealant with astraw applicator. Fills, seals andinsulates gaps, cracks and holesgreater than 1/2 inch. Curesrigid. Cream color foam.

Size Qty Code20OZ EA 90FOAM1

DOW GREAT STUFF®

GAPS & CRACKS SEALANTMinimal expanding polyurethaneinsulating foam sealant with astraw applicator. Fills, seals andinsulates gaps, cracks and holesup to 1/2 inch. Cures rigid.Cream color foam.


DOW GREAT STUFF®

WINDOW & DOOR SEALANTMinimal expanding low-pressureformulation flexible polyurethanefoam sealant with a strawapplicator. Perfect for sealingwindow and door frameopenings. Also ideal for sealingareas where low-pressureflexible foam is desirable. Curesflexible. Yellow color foam.


GOOP-ON®

The modern wood, hole and crackfiller. Stainable and sandable; canbe used on exteriors as well asinteriors. Will adhere to metal,glass, plaster, wood, furniture, etc.Perfect for new and unfinished floorinstallations.

Size Qty Code1GAL EA 6FM0GI


11415-824-4300

STAR® FIL-STIK®

Easy to use, semi-hard Fil-Stik®.Repairs minor scratches andnicks. Simply rub in and wipe off.Made to be finished over withlacquers, enamels, varnishes, orsimply buffed.

Size Color Qty CodeMed Walnut EA WF17WADark Brown WF17BR

Red Mahogany WF17BMCherry Vale WF17CH

Natural WF17NAHeritage Oak WF17OA

Off-White WF17WH

BONDO® ALL PURPOSEWOOD FILLERRepairs cracks, refills holes,patches and seals. Good forwood, concrete, brick, metal,stone, sheetrock and plastic.

Size Qty Code1QT EA WF40001GAL WF4010

COLOR FILL KIT• Laminate floor repairer and

joint filler.

• Repairs chips and scratches.

• No mixing required.

• Includes solvent.

Size Color Qty CodeBeech Black EA 6FGFA11Beech Plank 6FGFA12

Blue 6FGFA13Green 6FGFA15Maple 6FGFA17

White Oak 6FGFA19Alder 6FGFA20

White Beech 6FGFA21Merbau 6FGFA23

Pine 6FGFA24Red Oak 6FGFA25Cherry 6FGFA26

COLOR PUTTYMakes wood finishing easier.Stain wood (if necessary), seal orvarnish, fill nail holes andimperfections with correct shadeof color putty. Finish with coat ofseal or varnish (except epoxy).3.68OZ jars.

Size Color Qty Code1LB White EA WF16WH

Lt Birch WF16LBLt Oak WF16LO

RESTOR-IT™ EPOXY FILLERBadly deteriorated wood andmissing wood fiber can now berepaired with Restor-It™ FlexibleEpoxy Filler. Gaps, cracks, holesand any missing portion of woodcan be filled and re-used,eliminating the need to replaceexisting wood.

Once Restor-It™ Flexible EpoxyFiller is applied and cured, woodsurface becomes usable again.Maximum adhesion bonds woodback together providing asandable, nailable, drillable,carvable surface ready to paint, stain or varnish.

Restor-It™ protects wood in all temperatures and weatherconditions. Surface readily acceptsoil based primers, top coats andwater-based latex paints.

EPOXY

12 415-824-4300

Size Code2PT kit WR20001GAL kit WR2001

RESTOR-IT™ EPOXY SEALER(PART A&B)Turns soft, rotted wood hard andusable again. Stops rot and otherdamage from spreading.

Size Code2QT kit WR1000

BORA-CARE®

For use in and around homes, apartments,garages, museums, public and privateinstitutions, schools, hotels, hospitals,kennels, stables, form buildings, trucks,trailers, warehouse, supermarkets,restaurants, and food processing plants.

For prevention and control of:• Termites• Carpenter Ants• Wood Destroying Beetles• Decay Fung

Size Code1QT WCBC00

Size Code10OZ 9SETPA

• For use in base material 45ºF

to 100ºF.

• Works with standard caulking gun.• Mixes with an electric drill.• ICBO Building Code listed.

SIMPSON SET PAC™ EPOXY-TIE ADHESIVE

EPOXY

13415-824-4300

RESTOR-IT™ EPOXY CLEANUP SOLVENT Size Code

1PT can WR3000

Advantages:

• Easy to use: gel consistencyallows horizontal or vertical use.

• Reduced shrinkage: shrinkageduring cure is from 1% to 2%.

• Moisture resistant: a chemicalanchor that is resistant tohydrolyzation.

• Corrosion protection: ETcompound seals the hole andencapsulates the embeddedportion of the threaded rod.

Installation:• ET may be installed in concrete,

brick or masonry. Check for propermixture, a uniform gray color,before using. ET will not form anadhesive bond when dispensed asblack or white.

• Codes: ICBO NO. 4945; SBCCI94145; City of L.A. NO. RR25120,RR 25185 (ET22 and ET56.)

SIMPSON ET 22 EPOXY ADHESIVESize Code22OZ 9ET220

Brushes Code99CC06

Gun Code9EDT22

Nozzle & Nut Code9EMN22

Hot Dipped GalvanizedDiameter

1⁄2” 5⁄8” 3⁄4”11⁄2” 99MG4142” 99MG42021⁄2” 99MG4243” 99MG430 99MG53031⁄2” 99MG434 99MG534 99MG6344” 99MG440 99MG540 99MG64041⁄2” 99MG444 99MG544 99MG6445” 99MG450 99MG550 99MG65051⁄2” 99MG454 99MG554 99MG6546” 99MG460 99MG560 99MG66061⁄2” 99MG464 99MG564 99MG6647” 99MG470 99MG570 99MG67071⁄2” 99MG474 99MG574 99MG6748” 99MG480 99MG580 99MG68081⁄2” 99MG484 99MG584 99MG68410” 99MG410 99MG510 99MG61012” 99MG412 99MG512 99MG612

Zinc PlatedDiameter

1⁄4” 3⁄8” 1⁄2” 5⁄8” 3⁄4” 7⁄8” 1”1⁄2” 99M204 99M3043⁄4” 99M206 99M306 99M4061” 99M210 99M310 99M40111⁄2” 99M214 99M314 99M414 99M5142” 99M220 99M320 99M420 99M520 99M62021⁄2” 99M224 99M324 99M424 99M524 99M624 99M7243” 99M230 99M330 99M430 99M530 99M630 99M730 99M83031⁄2” 99M234 99M334 99M434 99M534 99M634 99M734 99M8344” 99M240 99M340 99M440 99M540 99M640 99M740 99M84041⁄2” 99M244 99M344 99M444 99M544 99M644 99M744 99M8445” 99M350 99M450 99M550 99M650 99M750 99M85051⁄2” 99M354 99M454 99M554 99M654 99M754 99M8546” 99M360 99M460 99M560 99M660 99M760 99M86061⁄2” 99M464 99M564 99M664 99M764 99M8647” 99M470 99M570 99M670 99M770 99M87071⁄2” 99M474 99M574 99M674 99M774 99M8748” 99M480 99M580 99M680 99M780 99M88081⁄2” 99M484 99M5849” 99M590 99M690 99M79010” 99M410 99M510 99M610 99M710 99M81012” 99M412 99M512 99M612 99M712 99M812

FASTENERS

14 415-824-4300

MACHINE (HEX) BOLTS

FASTENERS

15415-824-4300

CARRIAGE BOLTS

Zinc PlatedDiameter

1⁄4” 3⁄8” 1⁄2” 5⁄8”1” 99C210 99C31011⁄2” 99C214 99C314 99C414 99C5142” 99C220 99C320 99C420 99C52021⁄2” 99C224 99C324 99C424 99C5243” 99C230 99C330 99C430 99C53031⁄2” 99C234 99C334 99C434 99C5344” 99C240 99C340 99C440 99C54041⁄2” 99C244 99C344 99C444 99C5445” 99C250 99C350 99C450 99C55051⁄2” 99C254 99C354 99C454 99C5546” 99C260 99C360 99C460 99C56061⁄2” 99C364 99C464 99C5647” 99C370 99C470 99C57071⁄2” 99C3748” 99C380 99C480 99C58010” 99C410 99C510


3⁄8” 1⁄2” 5⁄8”31⁄2” 99CG3344” 99CG340 99CG44041⁄2” 99CG344 99CG444 99CG5445” 99CG350 99CG450 99CG55051⁄2” 99CG354 99CG454 99CG5546” 99CG360 99CG460 99CG56061⁄2” 99CG3647” 99CG370 99CG470 99CG5708” 99CG380 99CG480 99CG58010” 99CG510

FASTENERS

16 415-824-4300

LAG SCREWS

Zinc PlatedDiameter

1⁄4” 3⁄8” 1⁄2” 5⁄8” 3⁄4”1” 99L21011⁄2” 99L214 99L314 99L414 99L51413⁄4” 99L216 99L3162” 99L220 99L320 99L420 99L52021⁄2” 99L224 99L324 99L424 99L524 99L6243” 99L230 99L330 99L430 99L530 99L63031⁄2” 99L234 99L334 99L434 99L534 99L6344” 99L240 99L340 99L440 99L540 99L64041⁄2” 99L344 99L444 99L544 99L6445” 99L350 99L450 99L550 99L65051⁄2” 99L454 99L554 99L6546” 99L360 99L460 99L560 99L66061⁄2” 99L464 99L564 99L6647” 99L370 99L470 99L570 99L67071⁄2” 99L474 99L5748” 99L380 99L480 99L580 99L68010” 99L410 99L510 99L61012” 99L412 99L512


1⁄4” 3⁄8” 1⁄2” 5⁄8” 3⁄4”11⁄2” 99LG214 99LG3142” 99LG220 99LG320 99LG420 99LG52021⁄2” 99LG224 99LG324 99LG424 99LG524 99LG6243” 99LG230 99LG330 99LG430 99LG530 99LG63031⁄2” 99LG234 99LG334 99LG434 99LG534 99LG6344” 99LG340 99LG440 99LG540 99LG64041⁄2” 99LG344 99LG444 99LG5445” 99LG350 99LG450 99LG550 99LG65051⁄2” 99LG454 99LG5546” 99LG360 99LG460 99LG560 99LG66061⁄2” 99LG464 99LG5647” 99LG370 99LG470 99LG570 99LG67071⁄2” 99LG5748” 99LG380 99LG480 99LG580 99LG68010” 99LG410 99LG510 99LG61012” 99LG412 99LG512

Size Hole Diameter Code2”x2”x3⁄16” 1⁄2” 99SW2221⁄2”x21⁄2”x1⁄4” 5⁄8” 99SW243”x3”x1⁄4” 3⁄4” 99SW303”x3”x1⁄2” 7⁄8” 99SW7031⁄2”x 31⁄2”x 3⁄8” 1” 99SW80

FASTENERS

17415-824-4300

HEX NUTS Hot Dipped Galvanized Code3⁄8” 99HNG031⁄2” 99HNG045⁄8” 99HNG053⁄4” 99HNG067⁄8” 99HNG071” 99HNG0811⁄8” 99HNG11

WASHERSHot Dipped Galvanized Code3⁄8” 99HWG031⁄2” 99HWG045⁄8” 99HWG053⁄4” 99HWG067⁄8” 99HWG071” 99HWG0811⁄8” 99HWG11

Zinc Plated Code1⁄4” 99HN023⁄8” 99HN031⁄2” 99HN045⁄8” 99HN053⁄4” 99HN067⁄8” 99HN071” 99HN0811⁄8” 99HN11

Zinc Plated Code#6 99HW00#8 99HW01#10 99HW01A1⁄4” 99HW023⁄8” 99HW031⁄2” 99HW045⁄8” 99HW053⁄4” 99HW067⁄8” 99HW071” 99HW0811⁄8” 99HW11

HDG SQUARE WASHERS

Heavy-duty, Hot Dipped Galvanizedreinforcing washers.

FASTENERS

18 415-824-4300

MALLEABLE WASHERSHot Dipped Galvanized Code3⁄8” 99MW031⁄2” 99MW045⁄8” 99MW053⁄4” 99MW06

COUPLING NUTSZinc Plated Code1⁄2” 99HC045⁄8” 99HC053⁄4” 99HC067⁄8” 99HC071” 99HC0811⁄8” 99HC11

THREADED RODSHot Dipped Galvanized

Diameter1⁄2” 5⁄8” 3⁄4” 7⁄8” 1” 11⁄8”

3" 99TR04G 99TR05G 99TR06G 99TR07G 99TR08G 99TR11G10" 99TR41G 99TR51G 99TR60G

Zinc PlatedDiameter

1⁄2” 5⁄8” 3⁄4” 7⁄8” 1” 11⁄8”3" 99TR04 99TR05 99TR06 99TR07 99TR08 99TR116" 99TH64 99TR65 99TR66 99TR67 99TR68 99TR6110" 99TR41 99TR51 99TR60

FASTENERS

19415-824-4300

DRYWALL SCREWS,SELF-DRILLBugle head - zinc plate.

Recommended for application ofdrywall or gyp board to 12-20gauge metal studs.

DRYWALL SCREWS,FINE THREADZinc yellow*.

Original and primary application ofdrywall to 20–25 gauge metalstuds. Also known as “all purpose”screws.

Size Qty Code1” 1m/BOX 94SB1011⁄4” 500/BOX 94SB1215⁄8” 500/BOX 94SB152” 200/BOX 94SB2021⁄2” 200/BOX 94SB243” 200/BOX 94SB3033⁄4” 75/BOX 94SB3641⁄2” 50/BOX 94SB445” 50/BOX 94SB506” 50/BOX 94SB60

Size Qty Code1” 10m/CASE 94SC1011⁄4” 8m/CASE 94SC1215⁄8” 5m/CASE 94SC152” 3.5m/CASE 94SC2021⁄2” 2.5m/CASE 94SC243” 2m/CASE 94SC3033⁄4” 500/CASE 94SC3641⁄2” 500/CASE 94SC445” 500/CASE 94SC506” 500/CASE 94SC60

SCREW COVER CAPSFlexible plastic screw caps give aflush finish to broad surfaces.Flexible grooved pegs with hollowcore ensure a firm hold on screwraces. Use finger or hammer totap into screw head. Fits any #2square drive or phillips drive.

Size Qty Code#2 Square EA 94BB00#2 Phillips

Size Qty Code11⁄4” 500/BOX 94VB1215⁄8” 500/BOX 94VB1523⁄8” 200/BOX 94VB233” 200/BOX 94VB30

Size Qty Code11⁄4” 8m/CASE 94VC1215⁄8” 5m/CASE 94VC1523⁄8” 3m/CASE 94VC233” 2m/CASE 94VC30

*Gold/yellow head meets usercosmetic or rust preventive requirements.

FASTENERS

20 415-824-4300

PARTICLE BOARD SCREWS,COARSE THREADZinc yellow*.

Original and primary application ofdrywall to wood studs. Also used inmany interior/exterior fixturefastening applications.

*Gold/yellow head meets usercosmetic or rust preventive requirements.

Size Qty Code1” 250/BOX 94PB1011⁄4” 250/BOX 94PB1211⁄2” 250/BOX 94PB1415⁄8” 250/BOX 94PB152” 200/BOX 94PB2021⁄2” 200/BOX 94PB243” 200/BOX 94PB30

Size Qty Code1” 10m/CASE 94PC1011⁄4” 8m/CASE 94PC1211⁄2” 6.5m/CASE 94PC1415⁄8” 5m/CASE 94PC152” 3.5m/CASE 94PC2021⁄2” 2.5m/CASE 94PC243” 2m/CASE 94PC30

BUILDER SCREWSDacromate plating, coarsethreading.

Used for any exterior fasteningincluding decks, fences, shadestructures. Not recommended foruse in pressure treated wood.

Size Qty Code1” 250/BOX 94BB1011⁄4” 250/BOX 94BB1215⁄8” 250/BOX 94BB152” 200/BOX 94BB2021⁄2” 200/BOX 94BB243” 200/BOX 94BB3031⁄2” 75/BOX 94BB3433⁄4” 75/BOX 94BB364” 50/BOX 94BB405” 50/BOX 94BB506” 50/BOX 94BB60

Size Qty Code1” 10m/CASE 94BC1011⁄4” 8m/CASE 94BC1215⁄8” 5m/CASE 94BC152” 3.5m/CASE 94BC2021⁄2” 2.5m/CASE 94BC243” 2m/CASE 94BC3031⁄2” 1m/CASE 94BC3433⁄4” 1m/CASE 94BC364” 1m/CASE 94BC405” .5m/CASE 94BC506” .5m/CASE 94BC60

FASTENERS

21415-824-4300

FINISHING SCREWS,STAINLESS STEELSuperior corrosion resistance. Idealfor fastening corner boards, miteredends and toe nailing-typeapplications (pre-drilling a mustnear board ends).

FINISH SCREWSSelf-drilling point, won’t split wood,holds tight, suitable for exterior use,rust resistant dichromate plating,small square drive head.

Size Qty Code15⁄8” 500/BOX 94TB1521⁄4” 250/BOX 94TB223” 250/BOX 94TB30

Size Qty Code15⁄8” 5m 94TC1521⁄4” 4m 94TC223” 2m 94TC30

Size Qty Code1” 100/BOX 94ST1015⁄8” 94ST1521⁄4” 94ST223” 94ST30

BUILDER SCREWSSELF-DRILL/NIBBED HEADDacromate plating exteriorfastening requirements. Self drillpoint wont split wood. Nibbed headto aid in self countersinking. Coarsethread for high holding power.

Size Qty Code15⁄8” 200/BOX 94AB152” 200/BOX 94AB2021⁄2” 200/BOX 94AB243” 200/BOX 94AB3031⁄2” 75/BOX 94AB34

Size Qty Code15⁄8” 5m/CASE 94AC152” 3.5m/CASE 94AC2021⁄2” 2.5m/CASE 94AC243” 2m/CASE 94AC3031⁄2” 1m/CASE 94AC34

MAZE ZINCLAD® SCREWSHot-dipped zinc-coated to insuredependable corrosion resistance.

FASTENERS

22 415-824-4300

Size Qty Code2” 5850/CASE 94CC2021⁄2” 5000/CASE 94CC243” 4507/CASE 94CC30

Size Qty Code2” APPX 585 EA 5# 94CB2021⁄2” APPX 500 EA 5# 94CB243” APPX 450 EA 5# 94CB30

These case-hardened screws arehot-dipped in molten zinc to meetthe specifications of producers ofwood treatment chemicals.Excellent for a wide variety ofoutdoor uses such as decks, boatdocks, steps, patios, furniture,fences, flower boxes, or any projectwhere long-term corrosion-resistance and exceptional holdingpower are required. Phillips headsets flush. Use #2 Phillips driver foreasiest application. For best results,screws should be driven in onecontinuous motion. Avoid stoppingand restarting. Pre-drilling of holes ishelpful but frequently not necessary.

ACQ PT LUMBER SCREWS Size Qty Code6” x 15⁄8” 5m 94PTC156” x 2” 3.5m 94PTC208” x 21⁄2” 2.5m 94PTC248” x 3” 2m 94PTC30

Size Qty Code6” x 15⁄8” 200 EA 94PTB156” x 2” 200 EA 94PTB208” x 21⁄2” 200 EA 94PTB248” x 3” 200 EA 94PTB30

Square Type 17 “W.A.R. Coated”.

Introducing WAR coated deckscrews specially coated, tested,and designed to work with the newACQ-treated lumber.

FASTENERS

23415-824-4300

TAPPING SCREWS,FLAT HEAD PHILLIPS &PAN HEAD PHILLIPSZINC PLATED

Style CodePan Head F94PHSMFlat Head F94FHSM

Size#6 #8 #10

1⁄2” x x x3⁄4” x x x1” x x x11⁄4” x x x11⁄2” x x x2” x x x21⁄2” x3” x

WOOD SCREWS,FLAT HEAD PHILLIPS &ROUND HEAD SLOTTED

Size#6 #8 #10 #12

1⁄2” x x x x3⁄4” x x x x1” x x x x11⁄4” x x x x11⁄2” x x x x2” x x x x21⁄2” x x x3” x x x31⁄2” x x4” x x

Style CodeFlat Head F94FHWSRound Head F94RHWS

DECK SCREWS,STAINLESS STEALSQUARE DRIVEA very good fastener for woodexposed to weather and outdoorconstruction projects that call forsuperior corrosion resistance.

Size Qty Code15⁄8” EA 94SS1515⁄8” 100PC 94SS15A15⁄8” CASE/6500PC 94SS15B15⁄8” 5#/1070PC 94SS15C2” EA 94SS202” 100PC 94SS20A2” CASE/3500PC 94SS20B2” 5#/592PC 94SS20C21⁄2” EA 94SS2421⁄2” 100PC 94SS24A21⁄2” CASE/2500PC 94SS24B21⁄2” 5#/418PC 94SS24C3” EA 94SS303” 100PC 94SS30A3” CASE/2000PC 94SS30B3” 5#/340PC 94SS30C

FASTENERS

24 415-824-4300

CONCRETE SCREWSHex head and Phillips. For fasteningprojects into concrete.

Size Hex Phillips1⁄4 x 11⁄4” 99SH12 99SP121⁄4 x 13⁄4” 99SH16 99SP161⁄4 x 21⁄4” 99SH22 99SP221⁄4 x 23⁄4” 99SH26 99SP261⁄4 x 31⁄4” 99SH32 99SP321⁄4 x 4” 99SH40 99SP40

SELF-DRILL TAPHEX HEAD SCREWSZinc plated.

Size Code#6 #8 #10 F94HHTS

1⁄2” x x x3⁄4” x x x1” x x x11⁄4” x x11⁄2” x x

PAN FRAMER SCREWSFraming screw for 20–25GA metalstud to track, unique grip-tite, panhead. No. 2 phillips.

Size Qty Code7⁄16” 420 94PF76

STAR BIT TIP

CONCRETE SCREWSSTAINLESS STEEL HEX HEADFor fastening pressure treatedlumber to concrete.

Size Code1⁄4 x 11⁄4” 99SSH121⁄4 x 13⁄4” 99SSH161⁄4 x 21⁄4” 99SSH221⁄4 x 23⁄4” 99SSH261⁄4 x 31⁄4” 99SSH321⁄4 x 33⁄4” 99SSH36

Size For Pkg Code#25 - 2” 8-10-12 2EA DW2215#10 - 2” 6-7 1EA DW2215A

PHEINOX™ SCREWSR4 patented stainless steelStarhead. Made of PHE hardenedstainless steel. Lifetime warrantyagainst corrosion. Self-tapping,countersunk head with W-Cutthread design and Zip-Tip.

FASTENERS

25415-824-4300

DUROCK SCREWSDesigned for fastening fiber cementboard to wood.

Recommended for:• Fiber cement board to wood.• Lap siding.• Fiber cement roofing trim.• Flooring for tile in kitchen

and bath.

Size Qty. Code11⁄4” 100PCS 94DS1215⁄8” 100PCS 94DS1521⁄4” 100PCS 94DS22

Size Qty. Code9 x 11⁄2” 100PCS 94SP14

5#/725PCS 94SP14A9 x 13⁄4” 100PCS 94SP16

5#/697PCS 94SP16A9 x 2” 100PCS 94SP20

5#/627PCS 94SP20A10 x 21⁄2” 100PCS 94SP24

5#/418PCS 94SP24A10 x 23⁄4” 100PCS 94SP26

5#/348PCS 94SP26A10 x 31⁄8” 100PCS 94SP31

5#/325PCS 94SP31A10 x 4” 100PCS 94SP40

5#/255PCS 94SP40A

FASTEN MASTER™ COMPOSITE WOOD DECK SCREWSpecially designed to eliminate the“mushrooming” effect caused by standarddeck screws in composite deck materials.

Size Color Pkg Code21⁄2” Brown 5# 350EA 94ZB24A21⁄2” Grey 5# 350EA 94ZG24A21⁄2” Redwood 5# 350EA 94ZR24A21⁄2” Brown case 1750EA 94ZB24B21⁄2” Grey case 1750EA 94ZG24B21⁄2” Redwood case 1750EA 94ZR24B3” Brown 1# 75EA 94ZB303” Grey 1# 75EA 94ZG303” Redwood 1# 75EA 94ZR303” Brown 5# 350EA 94ZB30A3” Grey 5# 350EA 94ZB30A3” Redwood 5# 350EA 94ZR30A3” Brown case 1750EA 94ZB30B3” Grey case 1750EA 94ZG30B3” Redwood case 1750EA 94ZR30B

WEDGE BOLT HEX HEADSFor old concrete, block, brick, andstove. Pre-assembled heavy dutyanchor with a finished hex head.

Size Diameter1⁄2” 5⁄8”

23⁄4” 99S4263” 99S53033⁄4” 99S4364” 99S54043⁄4” 99S4465” 99S55053⁄4” 99S4566” 99S56081⁄2” 99S584

FASTENERS

26 415-824-4300

COMBO BITSDOUBLE ENDED BITS

SQUARE DRIVESSize Type Code#1 short Finish screws DW2201#1 long Finish screws DW2211#2 short Deck screws DW2202#2 long Deck screws DW2212

Size Code#2 Phillips/#8 Slotted DW2024#2 Square/#2 Phillips DW2214

HDG FOUNDATION BOLTSSize Diameter

1⁄2” 5⁄8” 3⁄4”10” 99F410 99F510 99F61012” 99F512 99F61214” 99F514 99F614

PHILLIPS INSERT BITSSize Code#2 short DW2004#2 long DW2022#3 short DW2003#3 long DW2023

Size Diameter3⁄8” 1⁄2”

13⁄4” 99E3S02” 99E4S021⁄2” 99E3L03” 99E4L0

FASTENERS

27415-824-4300

E-Z ANCORThe E-Z Ancor is faster than any toggler. Itpilots and sinks itself, so you don’t need tostud. No pre-drilling or hole preparationnecessary. It is easily backed out. Usesstandard #8 tapping (sheet metal) screw.

Size Code#8 HW0500

HEAVY DUTY TOGGLERToggler is a self-drilling toggle bolt forheavy-duty anchoring to dry wall. With a21⁄2”x#8 washer face phillips pan headsheet metal screw.

Size Code#8x21⁄2” HW0600

WEDGE ANCHORSHeavy duty one-piece wedgeanchor.

Size Diameter1⁄4” 3⁄8” 1⁄2” 5⁄8” 3⁄4”

13⁄4” 99R21621⁄4” 99R222 99R32223⁄4” 99R4263” 99R33031⁄4” 99R23231⁄2” 99R53433⁄4” 99R336 99R43641⁄4” 99R44441⁄2” 99R5445” 99R350 99R55051⁄2” 99R454 99R6546” 99R5607” 99R470 99R570 99R67081⁄2” 99R58410” 99R510 99R61012” 99R612

LAG SHIELDS

TOGGLE BOLTS Size Diameter1⁄8” 3⁄16” 1⁄4”

2” 94TG123” 94TG13 94TG33 94TG434” 94TG14 94TG34 94TG44

CORDLESS PASLODE 30ºFRAMER NAILS

15g Hitachi/Senco Gal Finish Angled Code11⁄2” 98ZG1413⁄4” 98ZG162” 98ZG2021⁄2” 98ZG24

FASTENERS

28415-824-4300

BRADS/FINISH NAILS16g Hitachi/Pas Straight Pin Code1” 98Y10011⁄2” 98Y1402” 98Y20021⁄2” 98Y240

Galvanized Smooth 8d 9d 10d 16d

[3M] 3” x .120” 98ZPG30

Bright Ring8d 9d 10d 16d

23⁄8” x .113” 98ZPR23

Galvanized Ring8d 9d 10d 16d

2 3⁄8” x .113” 98ZPRG23” x .131” 98ZPRG3

18g Gal Finish Straight Pin Code3⁄4” 98ZP061” 98ZP1011⁄4” 98ZP1211⁄2” 98ZP1413⁄4” 98ZP162” 98ZP20

15g Hitachi/Senco Finish Angled Code11⁄2” 98Z14013⁄4” 98Z1602” 98Z20021⁄2” 98Z240

Bright Smooth8d 9d 10d 16d

[5M] 23⁄8” x .113” 98ZPB23[3M] 21⁄2” x .113” 98ZPB24[3M] 3” x .131” 98ZPB30[2.5M] 31⁄4” x .131” 98ZPB31

Maze Decking Nail Double Molten Zinc 10d3”x128 Ring 98W7003”x128 Spiral 98W704

Hdg Box8d Cooler 10d Framer 16d Short

23⁄8”x113 98W208G3”x131 98W210G31⁄4”x131 98W216G

Eg Box8d 10d 16d

23⁄8”x113 98W3083”x131 98W31031⁄4”x131 98W316

Hdg Common8d 10d 16d

21⁄2”x131 98W108G3”x148 98W110G31⁄2”x162 98W116G

Bright Common6d 8d 10d 16d

2”x113 98W10721⁄2”x131 98W1083”x148 98W11031⁄2”x162 98W116

FASTENERS

29415-824-4300

GUN NAILS* Sinkers8d Cooler 10d Framer 16d Short

23⁄8”x113 98W2083”x131 98W21031⁄4”x131 98W216

*Fits the following Guns:• Hitachi – NR83A• Makita – AN8300• ATRO – RHS921• Halstead – HN34• Duofast – CN350• Haubold – RN90P11• Senco – SN60

Maze Ring Siding Double Molten Zinc6d 8d 10d

2”x113 98W70621⁄2”x113 98W7083x113 98W710

Bright Plywood 10d

21⁄8”x148 98W624

Bright Ring 8d 10d

23⁄8”x113 98W6283”x131 98W629

Hdg Ring 8d

23⁄8”x113 98W508

Hdg Plywood 10d

23⁄8”x148 98W624G

Joist Nail11⁄2”x148 98W63011⁄2”x148 98W630G (Hdg)

HDG Joist Nail11⁄2”x148 98W630G

FASTENERS

30 415-824-4300

FINISHGalvanized to resist rusting andstreaking, giving a smoothappearance to finish carpentry andtrim. Bright finish are small indiameter with cupped heads toallow countersinking below woodsurface for later fitting.

COMMONHDG are galvanized to resistrusting and streaking. For generalconstruction, carpentry andframing. Bright finish are forgeneral construction, carpentry andframing. Our most popular andversatile.

Style Code6d 8d 10d 16d 20d

HDG 5# x x x x x 97GC00HDG 50# x x x x 98GC00Bright 5# x x x x 97BC00Bright 50# x x x x 98BC00

BOXGalvanized to resist rusting andstreaking. A thinner shank thancommon rails reduces woodsplitting.

Style Code3d 4d 6d 8d 10d 16d

HDG 5# x x x x x x 97GB00HDG 50# x x x x 98GB00

Style Code4d 6d 8d 16d

HDG 5# x x x x 97GF00Bright 5# x x x x 97BF00

Style Code4d 6d 8d 16d

5# x 97MC8Dx 97MC16D

CORDLESS PASLODEBRADS

CORDLESS PASLODEFINISH NAILS 16g Finish Nail Qty Angled Gal Code

11⁄4” 2M 98XA0211⁄2” 2M 98XA0413⁄4” 2M 98XA062” 2M 98XA2021⁄2” 2M 98XA24

16g Brad Qty Straight Gal Code3⁄4” 5M 98XS061” 5M 98XS1011⁄4” 5M 98XS1211⁄2” 4M 98XS1413⁄4” 2.5M 98XS162” 2.5M 98XS2021⁄4” 2.5M 98XS2221⁄2” 2.5M 98XS24

MAZE CASING NAILS

FASTENERS

31415-824-4300

BRIGHT DUPLEX/SCAFFOLDDouble headed nail driven intowood up to the lower head. Thesecond head remains exposed toallow easy pulling.

Size Code8d 16d

5# x x 97BD0050# x x 98BD00

JOISTA heavy gauge nail suitable forsupporting metal connection forwood construction.

Style Code11⁄2”

Galvanized 5#/9GA x 97GJ00Galvanized 50#/9GA x 98GJ00Bright 1#/9GA x 96JH09Bright 1#/11GA x 96JH11Bright 50#/9GA x 98JH00

MAZE SPLITLESS SIDINGDouble molten zinc plating, speciallydesigned for split-prone woods.Special blunt point virtuallyeliminates splits.

Size Code6d 8d 10d 16d

5# x x x x 97MSPL

MAZE HARDBOARD (BOX)Double molten zinc plating. Sturdyshank drives easily. Checkered headenhances paint adhesion.

Size Code6d 8d 10d

5# x x x 97MHRD

VINYL SINKERThe vinyl coating lubricates wood,holds fast in framing. Easy drivingfor sturdy, permanent construction.

Size Code8d 16d

5# x x 97VS0050# x x 98VS00

FASTENERS

32 415-824-4300

STAINLESS SIDINGRING SHANKRust proof. For greater holdingpower.

Size Code3d 4d 6d 8d 10d 16d

5# x x x x x x 97SS00

MAZE SPIRAL DECKING NAILDouble molten zinc for pressuretreated lumber. Producers of woodtreating chemicals recommend thathot dipped zinc coated nails beused. Spiral shank holds tight.

Size Code12d

5# x 97MDEK

STAINLESS SPIRAL DECKINGRust proof. Spiral grooved shanklike a screw prevents backing out.

Size Code8d 10d 16d

5# x x x 97SD00

CONCRETEFor attaching wood to concrete. Size Code

21⁄2”5# x 97CN24

DRITITE CUP HEADFor attaching drywall to wood framing.

Size Code15⁄8”

5# x 97DT0050# x 98DT00

FASTENERS

33415-824-4300

GALVANIZED ROOFINGWide head aids holding and reducespull through. For asphalt shingles,roofing felt or insulation board.

Size Code11⁄2”

5# x 97RFOO

CC RINGSHANKCement coated and ringed forgreater holding power. For plywoodsheathing and plywoodunderlayment.

Size Code2”

5# x 97RS00

MAZE ROOFING• Double hot-dip / galvanized.

• Recommended and approved forJames-Hardie building products.

Size Length Code5# 2” 97RF20

MAZE PLASTIC-HEDYELLOW CAP NAILS• Eliminates damage to roofing

felts, housewraps and foaminsullation

• Angular ring holds tight

Size PCS Code1” 200 pcs 97PHO111⁄4” 200 pcs 97PHO211⁄2” 300 pcs 97PHO4

Size PCS Code11⁄4” 3000 pcs 98PHO111⁄4” 3000 pcs 98PHO211⁄2” 2000 pcs 98PHO4

Size Code100EA 25EA

1⁄2” ZX1000 ZX20003⁄4” ZX1001 ZX20011” ZX1002 ZX200211⁄4” ZX1003 ZX200311⁄2” ZX1004 ZX20042” ZX1005 ZX200521⁄2” ZX1006 ZX20063” ZX1007 ZX2007

FASTENERS

34 415-824-4300

WIRE BRADS

POWDER ACTUATED PIN AND WASHER ASSEMBLYPre-assembled washer and pin. Adds holding power whenstandard pin may pull through.Recommended for attaching softor easily torn materials to woodor steel.

Size Code100EA 25EA

3⁄4” ZX1008 ZX20081” ZX1009 ZX200911⁄4” ZX1010 ZX201011⁄2” ZX1011 ZX20112” ZX1012 ZX201221⁄2” ZX1013 ZX20133” ZX1014 ZX2014

Color Load Code100EA 25EA

Grey Light ZX1015 ZX2015Brown Medium ZX1016 ZX2016Green Strong ZX1017 ZX2017Yellow Heavy ZX1018 ZX2018

10 StripGreen ZX1019Yellow ZX1020Red ZX1021

POWER LOADS.22 calibre load for low velocitypowder actuated tools.

Size Length Code2oz 3⁄4” 95WB06

1” 95WB1011⁄4” 95WB12

POWDER ACTUATED STANDARD PINSZinc plated.

SP Series. Special hardened steelfasteners.

FURRING STUCCO NAIL Size Code5# 11⁄2” 97SN14

Zipwal™l is ideal for:• Floor finishing• Carpentry• Painting• Demolition• Asbestos abatement• Window installation

Zipwall is a Unique dust controlsystem that can save youhundreds of hours on all kindsof remodeling jobs: carpentry,floor finishing, wall andceilings, painting, sheetrockwork, asbestos or lead paintabatement, demolition ...whenever dust protection isneeded.

Goes up in less than 5 minutes.One person can put up a 20-foot long Zipwall dust barrier inless than 5 minutes. Using thetelescoping, twist lock Zipwallpoles topped with the patentedZipwall Jack, you simplyscreen off your work area withany plastic sheeting, canvastarp, dropcloth, etc.

Locks in place.The Zipwall Jack locks thescreening material firmlyagainst the ceiling. The foot ofthe pole keeps it snug againstthe floor. It’s so simple toinstall, you could put up fourwalls around the job site in justa few minutes. No specialtraining needed. The reusablepoles and jacks are made of themost durable materialsavailable.

Pays for itself in 2 or 3 jobs!For many contractors, ZipWallwill pay for itself in less than amonth. It even lets you take onjobs you might have turneddown because of dust controlcosts.

DOWELS/PLASTIC SHEETING

35415-824-4300

ZIPWALL™ QTY SIZE CodeEA 12’ ZIPWALL

1.After attaching jack to pole,unlock plate on jack by slidingpegs into large holes on head.Remove plate from head.

2. Place plastic sheeting onhead. Use pegs on plate topush plastic into large holes onhead. Lock by sliding pegs intothe small holes.

3. Unlock pole by turning innerpole counter-clockwise.

4. With foot of pole on ground,extend pole up so that theplate is pressed against theceiling by spring action of thejack. Turn pole extensionclockwise to lock it.

6. Raise pole and pull plasticsheeting under foot to make atight fit along the bottom of thewall.

5. Check fit of plastic againstthe ceiling. If it droops, loosenextension pole and move to aposition that pulls the plastictight. Note: Entire wall must besecured at top before securingbottom.

How Zipwall works:

DOWEL Size Specie Qty. CodeMINI Birch 100 6680011⁄4” x 15⁄8” Cherry 100 668002

Oak 100 668003Walnut 100 668004

1X Birch 40 6685013⁄8” x 23⁄4” Cherry 40 668502

Oak 40 668503Walnut 40 668504

Mahogany 100 668505Ipe 100 668506

2X Birch 40 6690011⁄2” x 32⁄3” Cherry 40 669002

Oak 40 669003Walnut 40 669004

Mahogany 100 669005Ipe 100 669006

IInncclluuddeess• MINI X Dowel - Dowel Length:

15⁄8” Cap Diameter: 1⁄4”. Forjoining wood up to 3⁄4” in. thick.

• MINI X TruFit™ Bit - Shape andsize of TruFit™drill bit matchesdowl perfectly.

IInncclluuddeess• 1X Dowel - Dowel Length: 23⁄4”

Cap Dia: 7⁄16” for joining wood upto 11⁄8” thick.

• 1X TruFit™ Bit - Shape and size ofTruFit™drill bit matches dowlperfectly.

IInncclluuddeess• 2X Dowel -- Dowel Length: 31⁄2”

Cap Dia: 1⁄2”. For joining woodup to 15⁄8” in. thick.

• 2X TruFit™ Bit - Shape and size ofTruFit™drill bit matches dowlperfectly.


36 415-824-4300

MILLER DOWELSMiller Dowels are available in a variety of woods and sizes. Miller Dowels...superior fasteners for solid wood joinery.

MINI X DOWEL AND BIT SET

1X DOWEL AND BIT SET

Qty. Specie Pcs CodeEA Birch 50 669000

2X DOWEL AND BIT SET

TRUFIT™™ DRILL BIT Size Qty. CodeMINI EA 6700001X EA 6700012X EA 670002



4 Mil (clear) Code4’x50’ 91P4056’x50’ 91P60510’x50’ 91P10512’x50’ 91P12520’x50’ 91P20520’x100’ 91P210

6 Mil (black) Code10’x50’ 91Q10512’x50’ 91Q12520’x50’ 91Q205

Size Qty Code32”x50” 15EA/ROLL ZTRASH

HARDWOOD DOWELS

P

POLY TRASH BAGS

PLASTIC SHEETING

BLUE POLY TARPSLabeled heavy duty polyethylenetarps are laminated on both sides for maximum weather-proofing.Cross weave fabric is designed formaximum strength and durability.Silver tarps are super heavy-duty 6MIL plastic. High strength, rust-resistant grommets on each cornerand approximately every 3!. Light-weight, tear resistant, washable,mildew proof, waterproof. Finishedsize is slightly smaller than cut size.


37415-824-4300

Size Code8’x10’ ZTRP089’x12’ ZTRP0912’x16’ ZTRP1216’x20’ ZTRP1618’x24’ ZTRP1820’x30’ ZTRP2026’x40’ ZTRP26

Size Qty Code1⁄4”x4’ EA 6674203⁄8”x4’ 6674301⁄2”x4’ 6674405⁄8”x4’ 6674503⁄4”x4’ 6674601”x4’ 667480

All items are made of top qualitymaple or birch hardwood.

Qty Code2 EA ZIPPER

THE ZIPPER• Entrance & Exit Maker.

• Create any width opening.

• Installs in seconds.

• Zips out dust, dirt, and heat loss.

SIDE GRAIN BOAT DECK PLUGSThese Side grain plugs are straightsided turned .005" to .008" oversize.They are 3⁄8" long with a smallchamber on one end.

Diameter Material Qty Code3⁄8” Teak EA 6674901⁄2” Teak EA 6674913⁄8” Mahogany EA 6674921⁄2” Mahogany EA 6674933⁄8” IPE 100 pcs. 667494

PAPER BACK STUCCO NETTING• Self-furring galvanized 17 Gauge

11/2” mesh stucco wire orgalvanized expanded metal lath.

• 15lb. felt moisture barrier lappedto drain.

INSULATION SUPPORT NETTING• Supports Insulation.

• Ceilings

• Kneewalls

• Under floors.

• Staple for permanent support.

• 1”x 2” mesh

Size Code4’x250’ 90R425

30/30/30 RATAN ASPHALT LAMINATED KRAFT GRADE B PAPERIs an ideal asphalt laminated paper for a moisture barrier underhardwood floors and for stucco backing in garages where interiorstudding is exposed. Aquabar B is also used as a backing forceramic tile and stone veneering, as well as a good work-over andmasking paper for general utility purposes.

Moderate water vapor resistance. 16 hour water resistance. 2sheets of Bs 30 kraft paper laminated with 30lbs per ream of highmelt point asphalt; low sulphur and virtually odor free. Meetsfederal Spec. UU-B-790a, Type 1, Grade B, Style 1a, and UBCStandard 17-1.

RATAN RED ROSIN SIZED SHEATHINGInexpensive, non-staining, limited water resistance,water vapor permeable. 36"x500SQ/FT .010 thickness.Cover sheet, deadening in floor structures, slip sheetin built up roofs, floor protection, “drop cloth,” underrigid foam in roof structures.

38415-824-4300

BUILDING PAPER/HOUSE WRAP/FLASHING

Size Code3’ x 500SQ/FT 91KRFR

DOUBLE RATAN BLACKRAFT ASPHALT SATURATED KRAFT (SHEATHING)Two sheets of Blackraft in the same roll. Two layers go upin one application. Water vapor permeable, water repellent.26#/MSF Natural Kraft paper saturated with high quality,low sulphur asphalt, virtually odorless. Meets FederalSpec. UU-B-790a, Type 1, Grade D, Style 2 as required inUBC Sec. 4706 (d) Exterior Lath, Weather-resistiveBarriers, Uniform Building Code and Uniform BuildingStandard No. 17-1. 40" wide, 500 and 324SQ/FT per roll.

Size Code40”x250’ 91KRFP

Size Code3’ x 500SQ/FT 91KRFT

Size Code371/2” x 100’ 91KRFW

ASPHALT SATURATED FELT PAPERStandard duty. Size Description Code

325SQ/FT 15# Felt Paper ASTM Approved 9115RF218SQ/FT 30# Felt Paper ASTM Approved 9130RF

CEDAR BREATHER• Allows for a continuous air space

between roof deck and shingles.

• Eliminates excessive moisture.

• Reduces potential rotting andwarping.

• Allows entire underside of shingleto dry.

Size Code200SQ/FT. 9115CB


39415-824-4300

BACKER ROD• Easy to install.• Ideal for irregular joints.• Economical

Surface Preparation: Clean joint of anyobstructions. All joint surfaces must be dry.

Application: Select a PL Backer Rod sizeapproximately 25% larger that the jointopening, to prevent sealant from passing oneither side. Push the Backer Rod into the jointwith a blunt tool or a finger, keeping uniformdepth. For best results, Backer Rod should beinstalled at one-half the width of the joint, notto exceed 1/2” depth or less than 1/4”.Maximum joint size should be 3/16”.

Size Qty. Code3⁄8” x 20’ EA 91BR035⁄8” x 20’ EA 91BR05

HOME SLICKERHome Slicker is the superiorsolution for providing a rainscreenfor wall systems that is easilyapplied and provides a continuous,vertically channeled air anddrainage space along the entireexterior wall. Home Slicker canlower moisture levels in siding andcladding systems, but is especiallyeffective for wood, fiber-cement,EIFS, and brick. Home Slicker helpsto preserve the exterior cladding,plywood, OSB, housewraps andbuilding papers, as well as paintsand stains.

Size Code150SQ/FT 9115CS

SpecificationsWidth 39.37 in. (1 meter)Length 46 1/2 ft.Coverage 150SQ/FT ± 2SQ/FT

Height/Thickness 0.25 in.Weight 7.2 lbs. per roll

7.0 oz./SQ/YD

Matrix Design 8 channels per 4 in.(2 channels per in.)

Warranty 40 Year limited

TYPAR HOUSEWRAP• Typar HouseWrap survives the rigors of

construction and won’t tear in the windor degrade in the sun.

• It’s easy to handle and cut. Convenientstud markings show you where to nailto speed installation.

• Glare resistant color.

• Unconditionally guaranteed to perform.

• Every structure is susceptible to dust, air and/or moisture.

• Regardless of whether the exterior is• stucco• wood• brick• or various siding materials,

the elements represent real potentialproblems in damage and energy loss.

PAPER WINDOW FLASHINGSize Code6”x300’ 91UF069”x300’ 91UF09

POLYFLASH WINDOW FLASHINGThe polyethylene coating installed facing outprovides superior water resistance for the timelapse before windows are installed and stuccoor siding is applied.

Some window manufactures and constructionauthorities favor the POLYFLASH product asthe paper back (next to the wood) has lesstendency to attract condensation.

Size Code6”x300’ 91UFO49”x300’ 91UFO5

TYPAR FLASHING PEEL AND STICK• Butyl-based

• Compatible with Sikaflex

• Ideal for straight jambs and heads ofwindows and doors

Size Code6”x75’ 91TYPS69”x75’ 91TYPS9

Size Code9’x100’ 900SQ/FT 91TYVK


40415-824-4300

TYPAR TAPEFor sealing joints on Typar. Size Code

17⁄8”x165’ 91TYVT

SLICKER SCREENSize Code6”x100” 9115CT

JIFFY SEAL WATERPROOF MEMBRANEInert, inorganic, and will never rot,decay, or be affected by bacteria orfungus.


41415-824-4300

PROTECTO SEAL 45• Self adhering all purpose peel

and stick exposable aluminizedwater proofing membrane.

• SBS modified rubberized asphalt.

Size Code2”x50’ 91JA444”x50’ 91JA456”x50’ 91JA469”x50’ 91JA4912”x50’ 91JA50

TYPAR FLASHING FLEXWorks best for window sills andaround curved windows.

Size Code6”x75’ 91TYFL69”x75’ 91TYFL9

QTY Size CodeEA 1⁄16”x2” 9115FS

ROLLED FURRING STRIPS• Use to fur out-of-plumb rough

framing for a smooth drywallinstallation.

• Use around windows for easiertrim installation.

• Creates a true plane for hangingkitchen cabinets.

• Can be used in a variety ofvertical applications.

BUILDING TAPE 20Size Code6”x100’ 91BT209”x100’ 91BT2212”x75’ 91BT25

Size Code12”x50’ 91JS1230”x50’ 91JS30

A new and superior self-adhering, airand moisture barrier for vertical andhorizontal above grade substrates. This 20mil polyethylene-backed SBSmodified rubberized asphaltmembrane can be applied to • aluminum• wood• vinyl• concrete and• block surfaces

to form an air andvapor barrier system.

Pheonixboard Builder’s Shim Stock and Rolled StripFurring can be applied with staples or nails to fill inlow spots on wood framing or to provide additionalbacking for casework and trim. Multiple layers ofprogressively longer or shorter lengths can beapplied to achieve the desired built-up thickness.Not intended for use in areas exposed to moisture.

• Since Building Tape 20 is a peel and stick self-adhering membrane, there is no nailing or stapling required.

• You simply center the tape over the area to be sealed and firmly press or roll the BT20 against the surface. Protecto-Wrapalso seals itself around nails and screws.

• Not only will it waterproof around doors and windows, it stops air leakage, thus reducing heating and air conditioning costs tothe homeowner.

FLOOR PRODUCTS

42415-824-4300

JIFFY SEAL MEMBRANE PRIMER #100• #100 primer is a high tack

SBS rubber base primer.• It is used on all vertical

surfaces before applicationof membrane and on allsurfaces with temperaturesbetween 25˚F and 40˚F.


JIFFY SEAL MEMBRANEPRIMER #80• #80 primer is an asphalt

base primer for use on allhorizontal applications above40˚F.


Size Qty Code1GAL EA 91JS80

Size Qty Code1GAL EA 91JS90

FLOOR PRODUCTS

43415-824-4300

FILM TECH® SURFACEPROTECTION FILM• Premium carpet protection.• Maintains a smooth walking

surface without lifting at theedges.

• Keeps carpet clean and looking “new.”

• Provides protection for up to45 days.

Size Code24”X200’ 91L242036”X200’ 91L3620

PROTECTO-TAK SPRAY ADHESIVERecommended for use with allProtecto Wrap window flashingtapes, sill sealing tapes,waterproofing membranes and airvapor barrier membranes.• Can be applied over concrete,

wood, OSB, vinyl, plywood, metal, aluminum, polyethylene, building wraps, Dens-Glass, Dens-Glass Gold, block and masonry surfaces.

• Excellent water resistance.• Does not contain methylene

chloride or ozone depleting chemicals.

• VOC compliment.

Size Qty Code16.25OZ spray EA 91JS10

Flooring

Surface Protection Film

PENOFIN ULTRA PREMIUM• Transparent exterior finish

formulated to safe guard thenatural beauty of wood.

• Resists stains and retards thebleeding of nails.

• VOC compliant.

Size Color Qty Code1GAL Transparent Cedar EA 93PNC1

WOOD COATINGS/FINISHES/SEALERS

44415-824-4300

Size Code1GAL 93GRN15GAL 93GRN5

*Copper computed aselemental 2%

COPPERNATE “250”™

WOOD PRESERVATIVE

GREEN’S CLEARWOOD PRESERVATIVEUse wherever wood meets water andsoil. Prevents deterioration caused by:

• Termites • Fungus• Rot • Decay

• Colorless, heavy duty, and waterrepellent.

• Controls warping and swelling.• Seals wood. • Kills termites and wood eating insects.

Size Code1GAL 93CLR1

COPPER-GREEN®

WOOD PRESERVATIVEIn easy convenient spray cans.Easy to use on pressure treated endcuts. Great for contractors to carryin carpenters’ pouch or tool box. Nomessy brushes or rags to clean-up.Spray can is powered bycompressed air. Product in a spraypouch with no formula change.

Size Code13.5OZ spray 93GRN3

A heavy duty water-repellent woodpreservative.

Active Ingredients: *CopperNaphthenate -20%, Petroleum Solvents -75%, Inert Ingredients -5%.

To prevent deterioration caused bytermites, powder post beetles, fungus,rot, and decay. Controls warping andswelling, and is paintable. Recom-mended for window frames, doors,stairs, porches, posts, siding, shingles,trellises, steps, subflooring, outdoorfurniture, fence pickets, fence rails,furring strips arbors, flooring, andbeverage cases. Also for use on fenceposts, poles, foundations, sills, decks,boats, and all wood exposed to moistureor weather.

Coppernate 250™ can be used to treatwood for greenhouses, i.e. nursery flats,etc. In addition to preventing decay, bluestain, and insect attack on wood. Thispreservative controls warping, swelling,shrinking, and end checking caused bychanges in moisture content of lumber

and plywood products. Powder postbeetles which invade furniture, flooringand structural lumber are controlled byapplication of this preservative. Theseinsects will not attack the treated wood.Wood to be protected againstsubterranean termites should be treatedbefore use in construction.

Estimate 150 to 200SQ/FT per gallon forbrush coat or 5 to 10 gallons per 1000board feet for dipping dimensionallumber.


45415-824-4300

STATION 1 ANTI-FLAMEFIRE RETARDANT WOODCOATING #2075W

Size Code5GAL 93FIR5

Revolution in home protection.

Los Angeles, CA - Culver City basedStation 1 Anti-Flame, Inc. hasintroduced a new product which willrevolutionize home protectionagainst fire and termites. Developedin Scandinavia as an anti-termitesolution. Station 1 Anti-Flame wassoon discovered to also prevent thespread of fire. This dual purposepreventative solution isenvironmentally friendly, colorless,and UL classified. Station 1 Anti-Flame may be used on shakeshingle roofs, wooden decks,building frames and exteriors, andsurrounding landscape.

For wood applications, Station 1Anti-Flame is applied with aspecially pressured spray gun whichallows the compound to impregnatethe wood. Station 1 Anti-Flame

contains specialized compounds which,when heated to the appropriatetemperature, will activate and removethe oxygen supply. Once the productdries, the surface is resistant to flame.

Termites and other wood-destroyinginsects can be eliminated by utilizingStation 1 Anti-Flame on all types ofwood framing, wallboard and homeexteriors. Insects are repelled when theycome in contact with the anti-termiteliquid. Station 1 Anti-Flame is guaranteedto prevent termites for up to ten years.

FLAMESTOP - IIFIRE RETARDANT FOROUTDOOR APPLICATIONS

Size Code1GAL 93FLAM

Ideal for architectural projects.• Specially formulated for outdoor

application such as cedar shakeroofs, shingles, siding, and anyexterior wood product. Useful forvarious types of fabrics such asawnings, canvas, costmes, gyprocpaper, thatching, stage props, haybarriers, welders clothing, andother porous cellulotic material.

• Weatherproofs the treated material, as well makes gyproc paper repel water. Tends to bring out the natral beauty of the wood surface.

• Meets NFPA 255, NFPA 701, UL723, and UBC 42-1 Standards and passed ASTM-E84 testing. It is a Class A rating with a Flame Spread 25, with one to two applications depending on the moisture content of wood.

• White in appearance but dries clear, easy to apply, water-based, non-toxic, non-carcinogenic and is applied with sprayer, roller, or brush.

• Exterior products will maintain their applied integrity and flame retardant effectiveness for an average of 5 years; in some cases, a minimum of 10 years.

• Contains polymers and surfactants that allow it not only to penetrate a wood surface, but also creates a weather-tight adhesion bond.

• Has additives that seal in the fire retarding chemicals.

• Drying time is 24 hours.• Also a wood preservative.

CABOT® WATER PROOFING WITH TEFLON• Advanced technology for

advanced results.

• Unique silicone emulsion

• Water based

• VOC free

• For wood: penetrates into pores,last longer than wax andexcellent for decks.

• For brick: seals the surface andis simple to apply.

• For concrete: reduces efflorenceand protects against freeze/thawcycles.


46415-824-4300

CABOT® WATER BASED CLEAR SOLUTIONWater-based Clear Solution is foruse on new or reconditioned woodonly, including siding, shingles,shakes, decks, fences, roofs, andlog homes. Water-based ClearSolution provides outstandingresults on all natural wood speciessuch as cedar, redwood, fir, pine,and cypress, including pressure-treated wood, plywood and texture1-11.

CABOT® CLEAR SOLUTIONTRANSLUCENT TONESIntroducing five, wood-inspiredtranslucent tones that enhance thenatural beauty of all exterior woodsurfaces. Protects against UV andwater damage and resists mildew.Made for the purist. For use onsiding, decks and shingles.

Size Color Qty. Code1GAL Clear Solution EA 93C9100

Cedar Translucent 93C9102Weathered Gray 93C9103

Heartwood 93C9104Pacific Heartwood 93C9105

5GAL Clear Solution 93C9100Pacific Heartwood 93C9105

Size Color Qty. Code1GAL Clear EA 93C3060

Cedar 93C3062Redwood 93C3065

Size Qty. Code1GAL EA 93C10005GAL EA 93C1000

WOLMANIZE® END CUTA brush on preservative especiallyformulated for end coating offreshly sawn ends of pressuretreated “outdoor” wood.

Size Code1GAL 93ECSI1QT 93ECSQ

CABOT® DECKING STAINSAdd beauty. Add years. Deep-penetrating alkyd resin baseprovides a tough, scuff-resistantfinish and longer-lasting protection.Water repellent and mildewresistant. Extend the life of yourdeck. For use on decks, fences,patio furniture, steps and railings.30 colors.

CABOT® SOLID COLOR DECKING STAIN WITH TEFLON® SURFACE PROTECTORState-of-the-art coating for all wooddecking, outdoor furniture andfencing, cement patios andwalkways. Long lasting, waterrepellent, mildew resistant. Resistsscuffing and erosion, and has un-surpassed washability. Protect now.Enjoy the beauty of outdoor living.

Style7400 Series

PLEASE ASK FOR OUR COLOR CARD.

Style1800 Series


CABOT® PROBLEM-SOLVERWOOD CLEANER, BRIGHTENER & STRIPPERThe cleaner removes mildew, mold,algae and dirt. The brightenerremoves tannin bleed and metalrust stains. It restores that rich“new wood” look. The stripperremoves oil-based finishes fromwood surfaces.

Cleaner Qty. Code1GAL EA 93C8002

Brightener Qty. Code1GAL EA 93C8003

Stripper Qty Code1GAL EA 93C8004


47415-824-4300

CABOT® PROBLEM SOLVER PRIMERProvides superior resistance totannin bleed, mildew and moisture.Ideal base coat for Cabot O.V.T®.Solid Color Stains or Cabot Finish.The secret to enduring beauty. (Inoil and 100% acrylic formulations.)

Size Color Qty Code1GAL White Oil Primer EA 93C8311

White Acrylic Primer 93C8022


48415-824-4300

CABOT® SEMI-TRANSPARENT STAINSEnhances natural wood grain byblending deep-penetrating oil withdelicate pigments. Water repellentand mildew resistant. It won’tcrack, blister or peel. To wood, it’sthe fountain of youth.

CABOT® OVT SOLID COLOR ACRYLIC STAINS IN UNLIMITED CUSTOMCOLORSOur computer can match any colorsample! 100% Acrylic formulationprovides beautiful coverage likepaint, but performs and protects likeno other stain. 12-year guarantee tonot crack, blister or peel whenapplied to new wood. Waterrepellent, mildew resistant. Themost beautiful results on earth.

Size0600 Series


Size Series Code1GAL 6300


CABOT® SEMI-SOLID STAINSOne coat does the job of two semi-transparent coats. A uniquelyformulated, richly colored oil-basedstain that provides longer-lastingprotection. For a very smart look.

Size Color Qty Code1GAL White EA 93C61011GAL New Cedar 93C61161GAL New Redwood 93C61171GAL Sequoia 93C61251GAL Red Cedar 93C61331GAL Drift Gray 93C61441GAL Dune Gray 93C61671GAL Redwood 93C61801GAL Desert Sand 93C6192

OTHER COLORS AVAILABLE

CABOT® OVT SOLID COLOROIL STAINSProvides beautiful coverage likepaint, but performs and protects likeno other stain. Resists cracking,peeling and blistering. Waterrepellent and mildew resistant. Hidethe years.

Size6500 Series



49415-824-4300

CABOT® BLEACHING OIL™

Accelerates the natural weatheringprocess and turns uncoated exteriorwood to a beautiful consistentdriftwood gray color in months. Go gray without aging.

Size Qty. Code1GAL EA 93C6241

CABOT® AUSTRALIAN TIMBER OILFor hardwood decks and outdoor furniture.

• Retains depth of color.• Keeps wood structure intact.• No flaking or peeling.• No grain erosion.• No graying.

Size Color Code1GAL Amber 93C94571GAL Honey 93C94581GAL Flame 93C94591GAL Natural 93C9400

WOLMANS® PUMP SPRAYERFast, easy way to apply cleaners,preservatives and many semi-transparent stains. Features amineral spirit-resistant hose,translucent poly so user can seeliquid level, exclusive Pic-A-Pattern™dual nozzle system with two fanpattern nozzles—different nozzleflow rates accommodate the widestrange of materials and make sprayermore versatile.

Size Qty Code11/2 GAL EA ZPUMP

CABOT® FINISHFinally there’s a finish that is asdurable as it is a 100% acrylic, low-luster finish for application to virtually any new or previouslypainted surface—with minimalsurface prep. 15-year guarantee onnew wood. For use on exterior trimand siding, including wood, primedmetal and stucco. 67 colors.

Style1700 Series


SIKKENS CETOL® SRD CALIFORNIAAn easy-to-use, translucent, water-repellent, exterior stain wooden siding,roofs, decks, railings, and deck furniture.Its alkyd resin stabilizes the wood grainand builds a durable UV resistant barrier.The Cetol SRD California protectivebarrier permits the wood to breathe andaccommodates seasonal shifts intemperature without losing adhesion tothe wood surface.

Horizontal Surfaces

• One coat of Cetol SRD California, which produces a matte finish, maybe used on decks (including hardwood decks) and docks.

• Three coats of Cetol SRD California, which produces a satin finish, isrecommended only for hardwoods used in decks, railings and deckfurniture.

Size Color Qty Code1GAL Natural Oak EA 93S00511GAL California Redwood EA 93S05411GAL Natural EA 93S07811GAL Teak EA 93S08511GAL Red Wood EA 93S08911GAL Natural Light EA 93S0961

Vertical Surfaces

• One coat of Cetol SRD California, which produces a matte finish, issuitable for siding, fences, roof shakes, shingle, and garden furniture.

• Three coats of Cetol SRD California, which produces a long-lasting,satin finish, is suitable for siding, doors, windows, fences, andgarden furniture.

SIKKENS CETOL® INTERIOR STAINCetol Interior Stain is a full-bodiedwaterborne wiping stain in a widevariety of natural shades anddecorative colors that feature finelyground pigments for unsurpassed colorclarity and rich, uniform staining results.

Nothing adds a feeling of warmth andquality to your home’s interior quite likefine wood. Whether it’s new oakpaneling, old hardwood rich with patinaof age or refinished furniture whosenatural splendor had been hiddenbeneath layers of paint–fine wood addsthe look of elegance and luxury to yourhome. It takes special care to revealthe true beauty of wood. Sikkenscustom line of interior wood careproducts will enhance and protect thatbeauty from the ravages of time.

Size Color Qty Code1QT Natural Oak EA 93S8041QT Walnut EA 93S8101QT Burgundy EA 93S8231QT Opal White EA 93S8301QT Cherry EA 93S8441QT Mahogany EA 93S8451QT Hunter Green EA 93S8611QT Butter Nut EA 93S8721QT Ipswich Pine EA 93S8741QT Natural EA 93S8781QT Teak EA 93S885

Cetol Interior Stain Advantages:• Finely ground pigments provide exceptional color clarity and uniform staining results.• Excellent workability—wipes on without splattering, drips, or brush marks.• Dries quickly and cleans up easily.Cetol Interior Stain Can Be Used On:• Cabinets and Furniture • Bathroom Woodwork • Kitchen Woodwork• Doors • Trim and Baseboards • Stairs and Banisters• Window Frames


50415-824-4300

SIKKENS CETOL® INTERIOR CLEARA solventborne transparent coatingthat gives a durable finish to all interiorwoodwork, it enhances the naturalbeauty of the wood grain with a hard-wearing and scratch-resistant topcoat.Cetol Interior is available in 2 glosslevels—Low Luster and Satin.

Size Gloss Level Qty Code1QT Satin EA 93S7700

415-824-4300


51

SIKKENS CETOL® UV INTERIORA waterborne formula for interiorwoods where a clear matte finish isdesired. Ideally suited for light coloredwood surfaces such as pine, itcontains a special UV inhibitor toretard the yellowing effects ofultraviolet rays. Resistant to dailywear-and-tear and can be applied onlog walls and in saunas. For use onbare wood only.

Size Qty Code1QT EA 93S71001GAL EA 93S7200

SIKKENS CETOL® BL INTERIOR CLEARA clear waterborne coating for a durablefinish on all interior woodwork. Itenhances the natural beauty of the woodgrain with a durable-wearing and scratch-resistant finish. A quick-drying, low odorformulation that provides easy clean up,Cetol BL is available in 3 gloss levels—Low Luster, Satin, and Gloss

Size Finish Qty Code1QT Low Luster EA 93S74001QT Satin EA 93S75001QT Gloss EA 93S7600

SIKKENS CETOL®

MARINE SATIN FINISHDescription:

• Enhances and protects the naturalbeauty of interior and exterior wood.

• Semi-transparent finish, preventsweathering and repels water.

• Easy to use, just wash woodthoroughly and apply.

• Three coats are recommended for thefirst application.

• Follow with annual touch-ups.

Size Qty Code1QT EA 93S7800

SIKKENS CETOL® WOOD CONDITIONERCetol Wood Conditioner provides abeautiful finish in a waterborne formulathat pre-conditions and seals wood,while ensuring a more uniform finishon large areas such as walls, doors,and floors.

Type: Special usage

Sheen: No sheen

DescriptionWaterborne conditioner for softwoodsthat allows for a more even application of Cetol Interior Stain.

Size Qty Code1QT EA 93S82001GAL EA 93S8201

Type: TransparentSheen: Low-luster, satin, glossDescription: Waterborne transparent finish for interior woodwork.Usage: Doors, trim, molding, windows, cabinets, ceilings, walls, logs,furniture, etc.Features: Water-clear finish, quick drying, washable, non-yellowingTechnology: Acrylic urethane

Type: TransparentSheen: MatteDescription: Waterborne transparent finish for interior woodworkmade for light-colored woods or when a matte finish is desired.Usage: Ceilings, walls, logs, saunasFeatures: Non-yellowing, washable, quick, dryingTechnology: Acrylic

UsageDoors, trims, moldings, windows, cabinets, walls, furniture,banisters, stairs, etc.

FeaturesQuick drying, minimizes blotching of stain application.

Technology: Waterborne

B-I-N® PRIMER-SEALERSTAIN-KILLER/BOND COATB-I-N adheres tenaciously to all dense, smoothand slick surfaces such as: dense hardboard,chipboard, glass, Formica® , ceramic tile, PVC& metal pipes, radiators, grillwork, fire doors,and galvanized ductwork. No sanding, etching ordeglossing agents are needed to get a firmbond. B-I-N provides an "anchor" for the top coatso it can't be chipped or scraped off easily.

415-824-4300

BULLS EYE 1-2-3®/PRIMER-SEALERSTAIN-KILLER/BOND COATInterior - Recommended for priming interior wall and ceiling.Seals porous drywall, plaster, wood and flat paint so finishcoat goes on smooth and dries evenly. Great for trim, doors,woodwork, cabinets, etc. Stick to glossy enamels and otherhard to paint surfaces without sanding or deglossing.

Exterior - Top rated wwaatteerr--bbaasseedd pprriimmeerr ffoorreexxtteerriioorr ssiiddiinngg including wood, masonry, vinyl andaluminum siding, as well as fascia, soffets, trim,windows, shutters, and doors.

Wallcovering - Bulls Eye1-2-3 also provides an excellent surface for most types of wallpaper. If future strip ability is desired, use SHIELDZ® UniversalPre-Wallcovering Primer & Sealer

Size Code1GAL 93PRM2

Blocking Stains - Blocks stains caused by marker, ball-point pen,crayon, lipstick, graffiti, grease and oil, etc.

Tinting - For better topcoat coverage, tint primer to approximatecolor of topcoat paint by adding up to 2 oz. universal colorant pergallon. For dark color priming use Bulls Eye 1-2-3 DEEP TINT, whichcan be tinted to darker colors by adding up to 6 oz. of colorantper gallon.

Topcoat Finishes - Finish with oil-base architectural topcoat paint.


52

PERMA-WHITE/MILDEW-PROOFINTERIOR WALL & TRIM PAINTAlthough PERMA-WHITE is formulated for thespecial conditions in bathrooms, it is also ideal forkitchens, basements, closets, laundry rooms, hottub rooms, locker rooms. PERMA-WHITE isrecommended for these high-use areas in schools,hospitals, hotels, nursing homes, and restaurants.

Walls and ceilings - recommended for new and previously

painted drywall, plaster, paneling, and ceramic tile. May be applied directly to

non-porous wallcovering. Scrubbable, stain-resistant finish.

Trim, doors, cabinets, woodwork - Self-priming, high-adhesion formulais excellent for new and previously painted doors and trim. Bonds tightly to glossyenamels and varnishes, ensuring a professional-looking paint job.

Size Code1GAL 93W2711Best interior latex paint for mildew-prone areas• GUARANTEED mildew-proof for 5 years.• Available in Satin & Semi-Gloss Finishes.• Self-Priming, high-adhesion formula —bonds to glossy surfaces

without sanding, unlike other paints.• Dries fast, recoat in just 2 hours.• Easy to apply with brush, roller or sprayer.• May be tinted to any pastel or medium shade.• Great for bathrooms, kitchens, laundry rooms, closets, and

basements—any area that is susceptible to mildew growth.• Cleans up easily with soap and water.

HIGH HIDE COVER STAIN®

PRIMER SEALER/BOND COATHigh Hide Cover Stain is a high-performance, all-surface ooii ll --bbaassee primer-sealer that offersoutstanding adhesion and stain killing power anddries to recoat in 2 hours. High Hide Cover Stainmay be tinted toward the color of the finish coatto help the topcoat hide in one coat.High Hide Cover Stain offers excellent flexibilityand penetration making it ideal for exteriorapplication to wood siding and trim. It sealssurfaces with one coat offering excellenthold-out for enamels of any sheen.

Size Code1GAL 93PRM3

Uses - For interior and exterior walls, ceilings, doors, trim, paneling,siding, window frames and shutters - any surface where a high-hiding, high-adhesion primer is desired. This all-surface low-VOCprimer-sealer can be used over or under any oil or latex architecturalpaint and is ideal for water damage, fire damage and smokedamaged (including nicotine) surfaces. Meets stringent SCAQMD AirQuality Standards for Specialty Primers, Sealers and Undercoaters.

• Interior and exterior • Blocks cedar & redwood bleed • Sticks to all surfaces without sanding • Fast drying - recoat in 2 hours • Use for fire, smoke & water damage

Size Code1GAL 93W0901

• Absolutely the best interior wood sealer.• Seals knots and sap streaks inside and out.• Seals pet, smoke and musty odors.• Seals water, smoke, graffiti and grease stains.• Sticks to all surfaces without sanding.• Lightening fast dry - recoat in 45 minutes.


53415-824-4300

ZINSSER SPRAY PRIMER• Covers stains.

• Primer sealer.

• Stain killing bondcoat.

• Dries in 30 minutes.

MARKING PAINT• Use these inverted marking

paints to deliver professionalapplications in construction,survey, athletic fields, andlocation identification.

• Safe on turf grass and fields of play.

Size Color Code17oz Florescent Orange 93PS22217oz Florescent Green 93PS22417oz Florescent Yellow 93PS22617oz Red/Orange 93PS230

Size Color Code13oz Flat White 93PRM4

PAINT THINNER• Clean air solvent.

• General purpose thinner.

• 100% mineral spirits.

• VOC content 6.5 lbs/gal.

Size Code1GAL 93PTIG1QT 93PTIQ

LITE-N-UP WOOD BLEACHWOOD KOTE• Used to lighten the natural color

of wood.

• Easy to use, one step two part kit.

• Self neutralizes, requires no rinsing.

Size Code1QT 93W0083

FORSITE MOLD & MILDEWRESISTANCE COATING• Available in clear or blue pigment to

monitor coverage area.

• High coverage - up to 1600 sf./gal.

• 10 year limited warranty.

• EPA/FDA compliant silver additive.

• Water based formula.

• Use any sprayer, roller or brush.

• Dries quickly within an hour.

415-824-4300

JEL’D POLY-KOTE/WOOD KOTE• Just wipe it on.

• Use on interior wood surfaces.

• Apply with a soft cloth.

• No steel wool or sandingbetween coats.

• No drips, runs, spills, or mess.

• Satin finish.

Size Code1QT 93W2160

JEL’D STAINS/WOOD KOTE• The original jelled wood stain.

• Premium quality interior stain.

• Perfect for doors, floors, cabinets,railings, moldings, and crafts.

Size Color Code1QT Light Oak 93W20131QT Brown Mahogany 93W20231QT Butter Nut 93W20331QT Cherry 93W20431QT Fruitwood 93W20631QT Golden Oak 93W20731QT Red Mahogany 93W20931QT Black 93W21131QT Walnut 93W21331QT White 93W21431QT Gray 93W2153

Size Color Code1GAL Clear 93E40005GAL Clear 93E4001SPRAY Clear 93E40021GAL Blue 93E45005GAL Blue 93E4501

Size Code1QT PUMP SPRAY 93E50001GAL 93E5001


54

ForSite is formulated as an easy to use permament coating that provideslong-term, residual protection against water intrusion, excessive moistureand mold and mildew growth on its surface. ForSite is ideal for newconstruction, remodeling or repair projects to prevent future mold growthon its surface as well as to protect porous and semi-porous constructionsurfaces from moisture damage. It can also be used in buildingremediation to restore the integrity of aged or water damaged materials.

MOLDEX MOLD INHIBITORMulti-purpose household cleaner designed as anindustrial cleaner for water damage restoration.Moldex is also approved for use as a hospital gradedisinfectant and has been specifically formulated asa fungicide and mildewstat. Moldex is based on aproven quaternary ammonium blend and packagedin a ready to use form.

• No bleach or rinse.

• Unscented.

• Can be painted over.


55415-824-4300

SEASONITE™

Stabilizes and protects pressure-treated wood from weathering.Ideal for new, pressure-treateddecks and patio lumber. Can beapplied before or after lumber isinstalled. Provides a slow, steadyseasoning process to reducewarping, cupping and swelling.Provides a sound surface forpainting, staining or finishing.Produces a film that resists mildew.Economical and easy to apply withbrush, roller or sprayer.

SUPER DI-ALL MILDEW SOLUTIONJust add Super Di-All to your paintsfor fast, easy mildew protection. Aliquid mildewcide, not a paste. Itdoesn’t change color, gloss ordurability. For use with all types ofpaint. 1OZ per gallon.

DEFTOIL® MARINETEAKWOOD FINISHProtects exterior woods above thewaterline from the effects of rainand sun. Hardens in the wood, noton the wood. Penetrates deep intowood pores to create the rich,warm glow of a hand-rubbed finish.Can’t chip, peel or wear away. Foruse on bare teak, mahogany, andother exotic woods.

URETHANE CLEAR FINISH• Maple counter top refinisher.• Fast drying, clear synthetic oil.• Moisture and alcohol resistant.

Size Qty Code16OZ EA 6FMCLR

Size Qty Code1OZ EA 93C1600

Size Qty Code1GAL EA 93FSE15GAL 93FSE5

Size Qty Code1QT EA 93DEFTQ1GAL EA 93DEFTG

415-824-4300

SHELF BRACKET

“T” PLATES

FLAT CORNER IRONS

CORNER IRONSInside corner braces, zinc platedsteel, bulk pack without screws.

• Reinforces right angle corner joints.• Screw holes are staggered in

5" and larger.

Size Width Qty Code11⁄2" 3⁄8" EA 9ZFI142" 3⁄8" 9ZFI2021⁄2" 1⁄2" 9ZFI243" 1⁄2" 9ZFI3031⁄2" 1⁄2" 9ZFI344" 3⁄4" 9ZFI405" 7⁄8" 9ZFI506" 7⁄8" 9ZFI608" 11⁄2" 9ZFI80

Size Width Qty Code11⁄2" 1⁄2" EA 9ZCI142" 5⁄7" 9ZCI2021⁄2" 5⁄8" 9ZCI243" 3⁄4" 9ZCI3031⁄2" 3⁄4" 9ZCI344" 7⁄8" 9ZCI405" 1" 9ZCI506" 11⁄8" 9ZCI608" 11⁄8" 9ZCI80

Size Width Qty Code3"x3" 5⁄8" EA 9ZTP334"x4" 3⁄4" 9ZTP44

Size Qty Code5"x6" EA 9ZWT566"x8" 9ZWT688"x10" 9ZWT8110"x12" 9ZWT9012"x14" 9ZWT99

Flat corner braces, zinc plated steel,bulk pack without screws.

• For use to reinforce flat surfaceright angle corner joints.

• Ideal for box, chest and furnitureconstruction or repair.

• Utility shelf bracket can be used asa support or brace.

• Strengths exceed ANSI/BHMAstandards.

• Brackets are designed for use withstandard dimensional lumber.

Zinc plated steel, bulk pack withoutscrews.

• For use to reinforce flat surfacejoints, seams and cracks.

• Ideal for box, chest and furnitureconstruction or repair.

SASH LOCK• Sash lock and strike for double

hung windows.

• Secures windows and reduces rattling.

• Aluminum die cast US3 brightbrass with wood screws.

Qty CodeEA ZA1500

SASH CORD• Manufactured with fine

cotton construction.

Size Code1⁄4"x50’ ZA15051⁄4"x100’ ZA1506

BUILDER’S HARDWARE

56

GATE HARDWARE

57415-824-4300

PLUMBERS TAPE• 10’ coil nail/bolt type galvanized

hanger strap.

• 20 gauge

• 1/4” diameter holes on 7/8”centers.

Size Code3/4”x10’ 9ZPT61

CONTINUOUS HINGES• Medium Gauge Construction

• For use on lids, table leaves andcabinet doors.

Size Finish Code

11/16”x48’ Nickel ZA1600Brass ZA1605




HOUSE NUMBERSDescription Code0 ZNBRAS01 ZNBRAS12 ZNBRAS23 ZNBRAS34 ZNBRAS45 ZNBRAS56,9 ZNBRAS6,97 ZNBRAS78 ZNBRAS8

• Full 4" house numbers; rust proofbright brass US3 finish withfastening pins.

HOUSE NUMBERSDescription Code0 ZNBLAK01 ZNBLAK12 ZNBLAK23 ZNBLAK34 ZNBLAK45 ZNBLAK56,9 ZNBLAK6,97 ZNBLAK78 ZNBLAK8

• Full 4" house numbers; rust proofUS10 black finish with fasteningpins.

415-824-4300

SAFETY HINGE HASPSZinc plated. Size Code

31⁄2" ZA140341⁄2" ZA14046" ZA1406

ORNAMENTAL DOOR PULLSize Qty Code

1 PAIR/PKG ZA1940

• Adds the finishing touch to gatesand doors.

• Durable black finish, heavy gaugesteel insures long weatheringservice.

• With screws:103⁄8" pull length61⁄2" grip length

DOOR PULLSSize Qty Code5" EA ZA194353⁄4" ZA194461⁄2" ZA194577⁄8" ZA1946

• Ideal for use on screens, cabinets,sheds, and barn doors.

• Comfort and appearance isenhanced by rounded contouredges.

• Packaged with screws.

• Zinc finish.

GATE HARDWARE

58

BARREL BOLTSZinc plated. Size Code

21⁄2" ZA14203" ZA14304" ZA1440

GATE HARDWARE

59415-824-4300

BUTT HINGESSquare corner. Size Qty Code

31⁄2" PAIR ZA18154" PAIR ZA1820

Size Code6" ZA17068" ZA170810" ZA1710

BOLT, HOOK, AND STRAP HINGE

HEAVY STRAP HINGESZinc plated. Size Code

5" ZA18006" ZA18058" ZA1810

Square holes permit use ofcarriage bolts or machine bolts.All sizes take 5⁄16" bolt.

DECORATIVE TSize Code7" ZA1715

MERX QUICK GATE™ HINGE• A 1 piece 36” hinge constructed

of a pre-drilled arm of flat steeland a pre-drilled 4” x 4” postclamp that never allows the gateto sag.

• Pre-drilled holes for quick and easyinstallation with any type or size ofplanks or framing materials.

• Gates can be built with minimal orno framing.

• Saves time by simplifyingconstruction.

• Replaces conventional hinges.

• Compare the alternates for cost,construction time and end productquality.

415-824-4300

T HINGESZinc plated.

Heavy ”T” hinges.

Size Code5" ZA19006" ZA19058" ZA1910

GATE LATCHESZinc plated. Style Code

Straight ZA1915Offset ZA1920Ring Type ZA1925

BUTT HINGESGalvanized with brass pin. Size Qty Code

31⁄2" PAIR ZA18254" PAIR ZA1830

GATE HARDWARE

60

Size Qty Code36” EA 9SHINGE

GATE FIXER• Fixes sagging gates.

• Braces, turnbucles, cableclamps, cable, and nails(included).

CodeZA1930

GATE HARDWARE

61

Size Finish Qty Code6" dull black PAIR Z5501509" dull black PAIR Z55022512" dull black PAIR Z550300

GATEMATE TEE HINGES

Size Finish Qty Code12" dull black PAIR Z551300

GATEMATE FLEUR DE LEYS HINGES

Size Finish Qty Code23⁄4" x 2" dull black PAIR Z552705

Size Finish Qty Code4" x 3" dull black PAIR Z553100

GATEMATE UNEQUAL HINGE

Size Finish Qty Code11" dull black PAIR Z554275

GATEMATE HINGEFRONTS ONLY F.D.I.

Size Finish Qty Code12" dull black PAIR Z56330018" dull black PAIR Z56345024" dull black PAIR Z563600

GATEMATE HOOK& BAND HINGES


GATEMATE LEVER LOCK HANDLE


GATEMATE LEVER LOCK HANDLE F.D.L.

GATEMATE BUTTERFLY HINGES

415-824-4300

415-824-4300

GATE HARDWARE

62

Size Finish Qty Code6" dull black EA Z557150

GATEMATE STRAIGHT DOOR BOLTS

Size Finish Qty Code4" dull black EA Z560100

GATEMATE DOOR HANDLE F.D.L.

Size Finish Qty CodeHeavy Epoxy Black EA Z523002

GATEMATE SUFFOLK LATCHES

Size Finish Qty Code21⁄2" Satin EA Z149002

LOCKS

• Mortis Sash Lock-3 lever(B)

Size Finish Qty Code4" Epoxy Black EA Z514100

GATEMATE OVAL PADBOLTS

Size Finish Qty Code4" x 1⁄2" Epoxy Black EA Z5121006" x 1⁄2" Epoxy Black EA Z512150

GATEMATE BRENTON PADBOLTS

HDG WINDSORLATCH (HEAVY)

GATE HARDWARE

63415-824-4300

Size Qty Code31⁄2" EA H602001

HDG OFF SET HINGE

Size Qty Code14" PAIR H50835018" PAIR H508450

HDG ADJUSTABLE BANDAND HOOK


HDG HEAVYREVERSIBLE HINGE

Size Qty Code10" PAIR H50725012" PAIR H50730018" PAIR H507450

HDG CRANKED BANDAND HOOK

Size Qty CodeHeavy EA H123003

Size Qty Code4" PAIR H0041006" PAIR H0041508" PAIR H004200

HDG TEE HINGES


HDG HEAVY TEE HINGES

415-824-4300

GATE HARDWARE

64

Size Qty Code6” SET H525150

HDG PLAIN RING LATCH

Size Qty Code31⁄2" EA H52515A

HDG PLAIN RING (ONLY)

Size Qty Code6" EA H5321508" EA H532200

HDG CABIN HOOK WIRE PATTERN

Size Qty Code6" SET H5241508" SET H5612001

HDG TWISTED RING LATCH

Size Qty Code31⁄2" EA H52415A4" EA H56120A

HDG TWISTED RING (ONLY)

Size Qty CodeHeavy EA H523002

HDG SUFFOLK LATCH

GATE HARDWARE

65415-824-4300

Size Qty CodeMedium EA H521001Large EA H521002

HDG AUTO CATCH

Size Qty Code4” EA H514100

HDG OVAL PAD BOLT


HDG AUTO LATCH

Size Qty Code6” EA H51215081⁄2” EA H512201

HDG BRENTON BOLT


HDG DOOR/GATE HANDLE

Size Qty Code6" EA H602002

HDG SLIDE BOLT

GATE HARDWARE

66 415-824-4300

HDG FLAT HEAD WOOD SCREWSSize Qty Code6" x 1" EA H4350088" x 1" H43502110" x 11⁄2" H43503212" x 2" H43504414" x 21⁄2" H435050

HDG TOWER BOLTSize Qty Code4" EA H5101006" EA H510150

HDG HEAVY HASPSize Qty Code8" EA H535200

HDG GARAGE DOOR BOLTSize Qty Code12" EA H520300

HDG CANE BOLTSize Qty Code12" EA H602004

SPRING DOOR STOP• Economy spring door stop.

• US3 bright brass finish withscrews.

• 213/16" projection.

DOOR HOLDER• Resilient non-matting tip provides

positive stopping action.

• Holds door open in any position.


DOOR HARDWARE

67415-824-4300

PAD LOCKSMASTER LOCKS• Double locking levers.

• High tech steel shackle.

• Reinforced laminate steel body.

Size Width Code3D 9/32" Shackle 11/2” ZA14015D 3/8" Shackle 2” ZA1400

FLOOR DOOR STOP• Floor mounted door stop helps

prevent damage to walls.


• 1/2” overall height.

Qty CodeEA ZA1502

SOLID DOOR STOP• Heavy design helps prevent

damage to walls.

• Contemporary styling.


• 3" projection.

Qty CodePAIR ZA1502A

Qty CodePAIR ZA1502B

Qty CodeEA ZA1502C

415-824-4300

DOOR LOCK INSTALLATION KIT• 3 easy steps.

• GuideRight template for exactalignment.

Qty CodeEA ZA1510

SCHLAGE PLYMOUTH SERIES ENTRY AND SINGLE CYLINDER DEADBOLT• Combination visual pack.

• Triple Option™ latch fits squarecorner, radius corner or drive-in latch application.

• Bright brass finish.

Type CodeEntry and Single ZA1528Cylinder Deadbolt

SCHLAGE DEADBOLTS• Triple Option™ latch fits square

corner, radius corner, or drive-in application.

• Single cylinder deadbolt.

• Visual pack.


Type CodeDeadbolt ZA1530

DOOR HARDWARE

68

SCHLAGE PLYMOUTHSERIES LOCKS IN VISUAL PACKS• Latch fits square or radius

corners or drive-in applications.

• Fits 23/8" or 23/4" brackets.


Type CodePassage ZA1520Privacy ZA1521Keyed Entry ZA1522Dummy ZA1523

Z BAR/L METALS/ALUMINUM FLASHING

69415-824-4300

STUCCO STOP

STUCCO CORNER

GRAVEL STOPSize Code21/2”x2”x10’ 9VGRAV

Size Code21/2”x21/2”x10’ 9VSTUC

Size Code7/8”x31/2”x10’ 9VSTUS

Z BAR 10’Size Code3⁄8” 9ZBAR31⁄2” 9ZBAR45⁄8” 9ZBAR53⁄4” 9ZBAR611⁄8” 9ZBAR811⁄2” 9ZBAR1

415-824-4300

ALUMINUM 50’ ROLLS

JOIST CAP 10’

L METAL 10’

SPECIAL Z BARSize Code2”x11⁄2”x1⁄2” 9ZBAR7

Size Code11⁄2” 9ZBL142” 9ZBL203” 9ZBL305” 9ZBL50

Size Code11⁄2” 9ZBC14

Size Code6” 9AF60512” 9AF125

Z BAR/L METALS/ALUMINUM FLASHING

70

VENTS

71415-824-4300

Louvered.

FOUNDATION VENTS

14X6 Style CodeStucco 9ZVF15Flat Wood 9ZVF14Plastic 9ZVF16

Style CodeW/8 Mesh 9ZVL14

REDWOOD FOUNDATION VENTSSize Code16”x4” 9ZVWS416”x6” 9ZVWS616”x8” 9ZVWS8

CEDAR FOUNDATION VENTSSize Code16”x6” with louver 9ZVWL616”x8” with louver 9ZVWL8

REDWOOD RECTANGULAR VENTSSize Code16”x12” 9ZVWG1216”x18” 9ZVWG1816”x24” 9ZVWG24

415-824-4300

SOFFIT CONTINUOUS VENT 10’

ROUND MINI VENTS

RAFTER VENTSFor both rustic and stuccoconstruction. Spring ends allow variation in size of opening.Galvanized steel, welded andembossed for extra strength.Holes punched for nails.

Size Code143⁄8”x31⁄2” 9ZVR14223⁄8”x31⁄2” 9ZVR22

Size Code1” 9ZVM102” 9ZVM203” 9ZVM304” 9ZVM40

Size Type Code11⁄2” Stucco 9ZVS1421⁄2” Stucco 9ZVS24

Size Type Code21⁄2” Plywood 9ZVT24

VENTS/DRYWALL METALS

72

PAPER DRYWALL CORNERSSize Type Code8’ Outside 94DT8A8’ Inside 94DT8B

DRYWALL CORNERSSize Code8’ 94DT0810’ 94DT10

DRYWALL METALS

73415-824-4300

R.C. CHANNEL

DRYWALL L MOLD

DRYWALL J MOLDEDGE GUARD

Size Code1⁄2”x8’ 94LM485⁄8”x8’ 94LM58

Size Code12’ 94RC01

Size Code1⁄2”x8’ 94EG485⁄8”x8’ 94EG58

PAN FRAMER SCREWSFraming screw for 20–25GA metalstud to track, unique grip-tite, panhead. No. 2 phillips.

METAL STUDS25 G

Size Code6”x7⁄16” 94PF76

Size Code11⁄4”x21⁄2”x10’ 94MT0011⁄4”x35⁄8”x10’ 94MT0011⁄4”x51⁄2”x10’ 94MT00

Size Code11⁄4”x21⁄2”x8’ 94MS0011⁄4”x21⁄2”x10’ 94MS0011⁄4”x35⁄8”x8’ 94MS0011⁄4”x35⁄8”x10’ 94MS0011⁄4”x51⁄2”x8’ 94MS0011⁄4”x51⁄2”x10’ 94MS00

*Gold/yellow heads meet user’s cosmetic or rust preventive requirements.

METAL TRACK25 G

415-824-4300

DECK FASTENING SYSTEMS

74

Size Type Qty Code221⁄2” Stainless EA 9DMASS

(special order)

Size Type Qty Covers Code221⁄2” Galvanized 10/PCK 25SQ/FT 9DMAST1221⁄2” Galvanized 100/PCK 250SQ/FT 9DMAST2

2” Decking

1” and 5⁄4” Decking

Size Type Qty Covers Code221⁄2” Galvanized 10/PK 25SQ/FT 9DMAST3221⁄2” Galvanized 100/PK 250SQ/FT 9DMAST4

Beautiful decks–When you build a deckwith Deckmaster® fasteners, you will findno unsightly nails or screws toblemish the beauty of the wood. The result is a smooth, unmarred deck surface.

The Deckmaster® fastener was designed by aprofessional deck builder to help deck boardswithstand extreme weather conditions, from snow andice to desert heat. Every deck board is double screwedfrom the bottom creating a solid, stable deck.

Construct a safer deck with Deckmaster® fasteners.There are no screws or nails to pop up as the woodshrinks. Wood splinters resulting from surface nails or screws will be a hazard of the past. Bare feet arealways comfortable on the smooth surface of a deckbuilt with Deckmaster® fasteners.

Why decks fail: with conventional deck construction,screws or nails are driven through the top of planks inwood joists. As wood weathers and shrinks, screwsand nails loosen and pop up becoming hazardous andallowing water to penetrate through the deck boardsand joists causing wood rot. The wood is no longerprotected even if the surface has been preservativetreated. Deckmaster® fasteners protect the decksurface by elimination the primary cause of deckfailure—moisture penetration through exposed screw of nail holes on the top of the deck surface.

Approved for use with all species of deck wood.Including treated wood and Mobil Trex® decking.

DECKMASTER® BRACKETS

NAIL OR SCREWINTO JOIST

2 SCREWS HOLDEACH DECK BOARD

DEC•KLIP™

Clip requirements: (approximateonly).

Size Joint Sp No Clips/Sq/Ft2x6 2! centers 12x6 16" centers 1.52x4 2! centers 1.82x4 16" centers 2.3

TYPE CODE DEC•Klip 9DCLIPStarter Klip 9DCSTR

BOWRENCH DECK TOOLWhat is it?

It’s the best tool for straightening(or bending) boards and joiningtongue & groove materials!

Where do you use it?

Decking, roofing, walls, T&Gboards, T&G plywood, T&G fiberpanels, boat building; what’syour application?

DECKS MADE EASY THE STRATTON BRACKETStairs/steps made easy. Boltsdirectly against any type of siding.The Stratton Bracket wasspecifically designed to meet orexceed the national building coderequirements and has been testedto safely support loads of more than400LB when just 2 brackets areproperly used or installed.

Frameworks Using Space Brackets Code2x6 Joist Up to 48" Apart 9DECKB2x8 Joist Up to 24" Apart2x10 Joist Up to 16" Apart2x12 Joist Up to 12" Apart

IPÉ PLUGSExtra 3⁄8” IPÉ PLUGS for placement in screw holesof the starter deck boards.


75

CodeZTOOLT

415-824-4300

IPÉ CLIP EXTREME KD• Stainless steel reinforced, square style.

• (175) IPÉ CLIP® Extreme Fasteners.

• (190) #8x2 Stainless steel screws.

• (12) IPÉ plugs.

• (1) Drill bit & screw gun driver bit.

• (1) Instruction sheet.

• Brown only.

QTY CodeEA 9ICLIPX

IPÉ TORX DRIVE SCREWSOur high quality #8 stainless steel Torx drivescrews.

IPÉ TORX DRIVE SCREWGUN TIPS#10 Torx drive screwgun tips.

QTY CodeEA 9ITRIM

QTY CodeEA 91TORX

QTY Code100 pcs. 667494

415-824-4300


76

BISON LEVEL.IT® ADJUSTABLE DECK SUPPORTS AND COUPLERS

LC

BISON LEVEL.IT® ACCESSORIES

C1

C4

DPH0

DPH1

ST18

B11

HD50

PS1

PH5

LD4

FFB

FIB

A4.5

Size Description Qty Code13⁄8” - 41⁄2” LC - Adjustable Pedestal EA 94LIB2

0” - 11⁄2” C1 - Gray Coupler EA 94LIC5

adds up to 4” C4 - Black Coupler EA 94LIC4(in combination w/ LC & LC1)

Size Description Qty Code1⁄2” Fixed HD50 - Stackable Fixed EA 94HD50Height Height Support

3⁄4” Fixed HD75 - Stackable Fixed EA 94HD75Height Height Support

1⁄16” Fixed B11 - Rubber Shim EA 94LIB11Height

1⁄8” Fixed PS1 - Plastic Shim EA 94LIPS1Height

Compensates LD4 - Bottom Leveler EA 94LILD4for 1⁄4” perfoot slope

Compensates PH5 - Top Leveler EA 94LIPH5for 0 - 5⁄8” perfoot slop

12” - 12” FFB - Floating EA 94LIFFBFoundation Base (Soil)

12” - 12” FIB - Floating EA 94LIFIBInsulation Base (Roof)

5⁄8” Fixed DPHO - Stackable Fixed EA 94DPH0Height Height Support

11⁄8” Fixed DPH1 - Stackable Fixed EA 94DPH1Height Height Support

1⁄8” Spacer ST18 - For Stone EATab

4.8mm A4.5 - For Wood EASpacer Tab

FS1 - Fastening Kit For EA

Bison Wood Tiles

HD75

FS1

spacer

stringerpivot screws

bracket

EZ STAIR XTRA SPACERS


77415-824-4300

EZ-STAIR® STAIR BUILDING KIT• Adjustable stair brackets.• Interior stairs.• Exterior stairs.• Concrete form work.

QTY Code2EA 94EZRP8EA 94EZCB

QTY Code8EA 94EZC5

spacer

stringer

PUSH

PUSH

cut ends

tread

riser

rotate

pivot screws

bracket

11 .. Set the brackets on the two 2 x 6stringer members using the spacersand pivot screws.

22 .. Remove spacers and rotatebrackets to adjust stair height.

33 .. Fix brackets in position, attachrisers and treads.

3 EZ STEPS INSTALLATION INSTRUCTIONS

AC/LPC POST CAPSTwin design allows easyinstallation.

Material: 18 gauge.

Finish: galvanized.

Installation: install in pairs.LPC–21⁄2" beams may be used if10dx11⁄2" nails are substituted for10d commons.

Codes: BOCA, ICBO, SBCCI Nos.NER-421, NER-443, NER-469; DadeCounty FL 93-1016.1, 92-0828.05;City of L.A. RR 25076.

A34/A35 FRAMING ANCHORSThe A35 anchors exclusive bendingslot allows instant, accurate fieldbends for all two-way and three-way ties. Balanced, and completelyreversible design permits the A35to secure a great variety ofconnections.

18 gauge galvanized. Someproducts available in stainless steelor Z-Max. A34 uses 8-8dx11⁄2"nails. A35 and A35F use 12-8dx11⁄2" nails. A35 uses 9-8dx11⁄2"nails for connection types A1, E,C1.

Codes: BOCA, ICBO, SBCCI No.NER-413; Dade County, FL No. 96-0719.10; City of L.A. No. RR 25119.

CodeA34A35

A35F

Width Length Code39⁄16" 61⁄2" AC4— 41⁄2" ACE451⁄2" 81⁄2" AC6— 81⁄2" ACE639⁄16" 51⁄2" LPC4

415-824-4300

SIMPSON PRODUCTS

78

A ANGLESMaterial: 12 gauge.

Finish: galvanized

Codes: BOCA, ICBO, SBCCI No.NER-421 (except A44).

W1 W2 Length Code41⁄2" 41⁄2" 11⁄2" A446" 6" 11⁄2" A668" 8" 2" A884" 2" 21⁄2" A2411" 35⁄8" 2" A311

A44 Angle

A88 Angle

A35F

A35F Framing Anchor

AC

ACE LCP

Use twoLPC6

post caps

BC POST CAPS/BASESThe BC series offers dual purposepost cap/base for light cap or baseconnections.

Material: 18 gauge galvanized.

Installed with 16d commons or16dx21⁄2" joist hanger nails. Notrecommended for non-top-supported installations such asfences when used as a base.

Codes: BOCA, ICBO, SBCCI No.NER-421; Dade County FL No. 92-0828.05; City of L.A. No. RR 25076.

SIMPSON PRODUCTS

79

CAPSW1 W2 L1 L2 H1 H2 Code39⁄16" 39⁄16" 27⁄8" 27⁄8" 3" 3" BC439⁄16" 39⁄16" 47⁄8" 27⁄8" 31⁄2" 21⁄2" BC464" 4" 4" 4" 3" 3" BC4R51⁄2" 51⁄2" 43⁄8" 43⁄8" 33⁄8" 33⁄8" BC6

BASESW1 W2 L1 L2 H1 H2 Code39⁄16"# — 31⁄4" — 21⁄4" — BC4O*4 — 4" — 3" — BC4OR51⁄2" — 33⁄8" — 3" — BC46O51⁄2" — 51⁄2" — 3" — BC6O

*ALSO AVAILABLE IN 12 GAUGE

ADJUSTABLE POST BASESWidth Length Code39⁄16" 39⁄16" AB4439⁄16" 51⁄2" AB4651⁄2" 51⁄2" AB66

Fully adjustable post base offersmoisture protection, structuralvalues, ease of installation, andfinished hardware appearance.Standoff plate provides flat endbearing for post and keeps post end11⁄8" above surface moisture.

Finish: 12 gauge adjustment andstand-off plates. 16 gauge basecover. Galvanized.

Installation: post nail holes are sizedfor 10d commons. Rectangularadjustment plate assumes 1⁄2"diameter anchorage. The AB issupplied as shown; position thepost, secure the easy-access nut,then bend up the fourth side. Fornon-bolt, non-adjustmentinstallations, 3⁄16" holes for optionalnail holddown or powder-actuatedfasteners in a concrete or wood

base are in the base cover. A 2"minimum side cover is required to obtainthe full load. Not recommended for non-top-supported installations such asfences.

Codes: BOCA, ICBO, SBCCI NER-393;City of L.A. RR 24818.

ALUMINUM POST STANDOFFThe APS stand-off height aboveconcrete or masonry floors or decksreduces decay at post and columnends.

Material: cast aluminum.

Installation: attach to the postbefore installation using four nailholes. Embed a rod into concreteand extend into wood member. Fornominal or rough sawn lumber.

Width Height Code31⁄4" 1" APS451⁄8" 1" APS6

415-824-4300

AB

APS4

BC4 Cap Bace

2” minimumsidecover

415-824-4300

SIMPSON PRODUCTS

80

CBA COLUMN BASESAdjustable column base whichallows precise column placementafter the concrete cures. For new orretrofitted nominal or rough 6x’s.Bottom panel functions as a built-inmoisture barrier (partial barrier forrough sizes.)

Finish: galvanized.

Installation: install in pairs, usingtwo 16d nails for temporaryattachment while boring bolt holes.Install all models with base plateflush with concrete. Notrecommended for non-top-supported installations such asfences. Options: rough and othersizes available: specify W1 and W2dimensions. Consult Simpson fo boltsizes and allowable loads.

CodeCBA66

CB COLUMN BASESFor columns that require highstructural values and ruggedperformance.

Material: Simpson gray paint orHDG.

Installation: for full loads, minimumside cover required is 3!. Install allmodels with base plate flush withconcrete. Not recommended fornon-top-supported installationssuch as fences.

Options: Rough and other sizesavailable: specify W1 and W2dimensions. Consult Simpson forbolt sizes and allowable loads.

Codes: BOCA, ICBO, SBCCI Nos.NER-393 and NER-432; City of L.A.Nos. RR 24818, RR 25074.

W1 W2 D Code39⁄16" 39⁄16" 8" CB44

CB44R39⁄16" 51⁄2" 8" CB4651⁄2" 51⁄2" 8" CB66

CB66R

Codes: BOCA, ICBO, SBCCINos. NER-393 and NER-432;Dade County FL No. 93-1016.1;City of L.A. Nos. RR 24818, RR25074.

CB or LCB

3” minimumsidecover(2” for LCB)

CB44 configuration(CB46, CB66 similar)

SIMPSON PRODUCTS

81

Material: DRT8 is 18 gauge, DPT5 and7 are 14 gauge.

Finish: Z-max

Installation: DPT5 and 7: testing showssimilar strength and deflection limitswhen compared with 4x4 postsattached to 2x8 rim joists with two 1⁄2"machine bolts placed 31⁄2" apart. Installin pairs at a recommended minimumcenter-center spacing of 5". Use two3"8" through bolts and 5–10dx11$2"nails for DPT5 (5–10d commons forDPT7) per tie.

DRT8 Deck Railing Tie: eliminatesnailing into the top of hand railing.Attaches 2x4 and 2x6 hand railing toposts. Use four #8 x11⁄4" flatheadwood screws. Drive prongs into post,then two screws into the post and twoscrews into the railing.

CodeDPT7DRT8

DECK-TIE CONNECTORS

415-824-4300

CS COILED STRAPS Total EndLength Length Gauge Code150! 14! 16 CS16

Continuous utility straps which canbe cut to length on the job site.Packaged in lightweight (about 40lbs.) cartons. Available in retailpacks of 25!; convenient for the do-it-your-selfer or contractors whorequire smaller strap lengths, andpackaged in portable 10" squarecartons.

Finish: galvanized. Some productsavailable in Z-Max; contact factory.

Installation: wood shrinkage afterstrap installation across horizontalwood members may cause strap tobuckle outward.

Codes: BOCA, ICBO, SBCCI NER-413and NER-499; Dade County FL93-1016.1.

CS16

DRT8

415-824-4300

Size W1 W2 L1 L2 L3 No4x4 39⁄16" 39⁄16" 25⁄8" 11" 73⁄8" EPC44-164x4 39⁄16" 39⁄16" 25⁄8" 11" 73⁄8" EPC444x6 39⁄16" 51⁄2" 25⁄8" 13" 91⁄4" EPC46-164x6 39⁄16" 51⁄2" 25⁄8" 13" 91⁄4" EPC464x6 51⁄2" 39⁄16" 49⁄16" 11" 73⁄8" EPC64-164x6 51⁄2" 39⁄16" 49⁄16" 11" 73⁄8" EPC646x6 51⁄2" 51⁄2" 49⁄16" 13" 91⁄4" EPC66-166x6 51⁄2" 51⁄2" 49⁄16" 13" 91⁄4" EPC66

EPC POST CAPS

SIMPSON PRODUCTS

82

DS DRYWALL STOPEliminates costly blocking at topplate, end walls, and corners. Atypical residence will use severalhundred of these inexpensive clipswith a substantial savings inblocking and labor. The installationprongs provide even more labor savings.

Material: 20 gauge.

Finish: galvanized.

Installation: 16" on center or less,using 8d commons.

Codes: BOCA, ICBO, SBCCI No. NER-413.

CodeDS1

SSTB ANCHOR BOLTS• Rolled threads for tensile

capacity.

• Stamped bolt head.

• Stamped embedment line.

Size Code16" SSTB1620" SSTB2024" SSTB2428" SSTB28

Model7No.

SSTB16SSTB20SSTB24SSTB28SSTB34SSTB36

AvgUlt

136401474514745327003270032700

Concretef9c=2500psi

442046005175101001010010100

ConcreteBLock478047804780638563856385

ConcreteBLock End

185018501850481548154815

StemwallWidth

666888

Dia

5⁄85⁄85⁄87⁄87⁄87⁄8

Length

175⁄8215⁄8255⁄8297⁄8347⁄8367⁄8

Allowable Tension Load (133) 1.2

Special Order

DS

EPC

FOUNDATION ANCHORSDiameter Qty Code

1⁄2" 2 FA81⁄2" 2 FJA1⁄2" 2 FSA

This series is for retrofit or newconstruction. These products maybe used together as a system or inindividual applications, designed andtested for earthquake and high windconditions.

FA anchors eliminate vertical drillingby nailing into the top of the mudsill.They facilitate installation whenvertical space is limited, and resistforces between the foundation andmudsill.

FJA foundation joist anchors nail orbolt directly into floor joist, andprovides a direct connectionbetween the foundation and joist. Itprovides uplift and lateral resistance.FSA foundation stud anchors nail orbolt to floor joists or nail to studs.Plywood shearwall may requirenitching with stud-to-foundation

SIMPSON PRODUCTS

83

Height Threaded(Min-Max) Rod Length Code

2”-4” 43⁄4" JP445”-7” 4" J57

13”-18” 8" J1318

FLOOR BEAM LEVELERSJack piers and standard floor beam levelers offer unique leveling simplicityduring and after construction. JPs allow two simple methods of installationfor economy and design versatility. Both models are adjustable; see table.

Material: 12 gauge plates, 3⁄4" threaded rod, 3⁄4" steel pipe.

Finish: None. Connectors installed in damp areas, or corrosive environmentsthat are not exposed to rain or periodic washing, will deteriorate at a fasterrate. Corrosion-resistant finish and maintenance can improve the connectorsservice life.

Installation: Use all specified fasteners; see general notes. Holes areprovided for installation with 16d commons. Do not use J/JPs for dynamicjacking of structures, such as houses.

Codes: BOCA, ICBO, SBCCI No. NER-413. City of L. A. No. RR

415-824-4300

installation.Material: 12 gauge.

Finish: galvanized.

Installation: select and install concreteanchor bolts in accordance with themanufacturer’s recommendations.

Codes: BOCA, ICBO, SBCCI Nos. NER-469 (FA8, FJA); City of LA No.RR25158.

JP

FA

FSA

FJA

H SEISMIC AND HURRICANE TIESThe H connector series provideswind and seismic ties for trussesand rafters.

Finish: galvanized; also available instainless steel or Z-Max.

Installation: H1 can be installedwith flanges facing outwards.When installed inside a wall, abirdsmouth cut is required. H2.5,H3, H4, and H5 ties are shipped inequal quantities of separate rightsand lefts.

Codes: BOCA, ICBO, SBCCI Nos.NER-422, NER-393, NER-499; DadeCounty, FL No. 96-0719.10; City ofL.A. No. RR 24818.

415-824-4300

SIMPSON PRODUCTS

84

Gauge Code18 H1

H2H2.5

H320 H418 H516 H6

HH HEADER HANGERSWidth Height Code39⁄16" 27⁄8" HH451⁄2" 51⁄4" HH6

For fast, accurate installation of doorand window headers and other crossmember details. HH header hangersspeed up the job, strengthen theframe, and eliminate the need fortrimmers.

Material: 16 gauge.

Finish: galvanized.Codes: BOCA, ICBO SBCCI No. NER-413; Dade County, FL No. 93-0828.4;City of L.A. No. RR 25119.

HH

H2

H2.5

H3

H5H4

H1 H6

HL HEAVY ANGLES AND GUSSETSVersatile angle gussets and heavyangles promote standardization andconstruction economy, and arecompatible with Strong-Tiestructural hardware.

Finish: Simpson gray paint.

Options: gussets may be added toHL models when L%5" (specify Gafter model number, as in HL46G.)

GA W1 & W2 L D1 D2 D3 D4 Code7 31⁄4" 21⁄2" 11⁄4" — 2" — HL337 31⁄4" 5" 11⁄4" 21⁄2" 2" — HL35G*7 53⁄4" 5" 11⁄4" 21⁄2" 2" 21⁄2" HL55

HL35G* IN STOCK

SIMPSON PRODUCTS

85

HDA HOLDOWNS Base BodyGauge Gauge HB SB W H B SO CL Code

7" 12" 41⁄2" 21⁄2" 21⁄2" 8" 25⁄8" 1⁄4" 11⁄2" HD2A3" 10" 51⁄4" 3" 33⁄16" 93⁄8" 31⁄2" 1⁄2" 21⁄16" HD5A3⁄8" 7" 63⁄16" 31⁄2" 31⁄8" 111⁄16" 37⁄16" 9⁄16" 21⁄16" HD6A

143⁄8" HD8A177⁄8" HD10A

Holdowns are used to transfer tension loads between floors, to tiepulins to masonry or concrete, etc. Use for overturn requirementsand other applications to transfer tension loads. All HDAs are self-jigging, ensuring code-required minimum 7! bolt diameter spacingfrom the end of the wood member.

HD6a, HD8A, HD10A’s seat design allows greater installationadjustability. An overall width of 31⁄4" for the HD6A, HD8A andHD10A provides for an easy fit in a standard 4x wall.

Special Features: single piece non-welded design results in highercapacity. Load transfer plate eliminates the need for a seat washer.Fewer inspection problems.

Finish: galvanized. HD8A may be ordered HDG; check with thefactory.

Installation: for an improved connection, use a steel nylon lockingnut or a thread adhesive on the anchor bolt. Bolt holes shall be aminimum of 1⁄32" to a maximum of 1⁄16" larger than the boltdiameter (per 1991 NDS, section 8.1.2.1.)

Standard washers are required on stud bolt nuts against the wood.The Load Transfer Plate is an integral part of the HDA Hold downand no washer is required.

Locate on wood member to maintain a minimum distance of sevenbolt diameters from the end of the member to the centerline of thefirst bolt hole (HDAs are self-jigging; minimum required distance isautomatically maintained when end of wood member is flush withthe bottom of the holdown.)

To tie double 2x members together, the designer must determinethe fasteners required to bind members to act as one unit withoutsplitting.

For holdowns installed on the mudsill, anchor bolt nuts should befinger-tight plus 1⁄3 to 1⁄2 turn with a wrench, with considerationgiven to possible future wood shrinkage. Care should be taken tonot over-torque the nut, which may lead to premature anchor boltfailure.

Stud bolts should be snugly tightened (per 1991 NDS, section8.1.2.4.)

Codes: BOCA, ICBO, SBCCI Nos. NER-393, NER-469; City of L.A.Nos. RR 24818 and RR 25158.

415-824-4300

HD5A

415-824-4300

SIMPSON PRODUCTS

86

HUC FACE MOUNT HANGERSConcealed flange.

HU FACE MOUNT HANGERSMost models have triangle andround holes, which give high loadswhen filled with common nails.These heavy-duty connectors aredesigned for schools and otherstructures requiring additionalstrength, longevity and safetyfactors.

Can be installed filling round holesonly, or filling round and triangleholes for maximum values.

Codes: BOCA, ICBO, ICBO No.5117; Dade County, FL No. 96-0719.09; City of L.A. Nos. RR24947, RR 24818.

Joist Size Gauge W H B Code4x6 14 29⁄16" 105⁄8" 21⁄2" HUC464x8 39⁄16" 613⁄16" HUC484x10 85⁄8" HUC4104x12 105⁄16" HUC4126x6 51⁄2" 43⁄16" HUC66

Joist Size Gauge W H B Code3!x12! 14 29⁄16" 105⁄8" 21⁄2" HU3122x4 39⁄16" 27⁄8" HU444x6 53⁄16" HU464x8 613⁄16" HU484x10 85⁄8" HU4104x12 105⁄16" HU4126x6 51⁄2" 43⁄16" HU666x8 513⁄16" HU686x10 75⁄8" HU6106x12 93⁄8" HU612

HUS FACE MOUNT HANGERSProvides intermediate load-carryingcapacity. Available with the headflanges turned.

Codes: BOCA, ICBO, SBCCI Nos.NER-209, NER-413, NER-421, NEW-499; Dade County, FL No. 93-0828.8, 93-0824.07; City of L.A.Nos. RR 24949, RR 25076.

Joist Size Gauge W H B Code4x6 14 29⁄16" 105⁄8" 21⁄2" HUS464x8 613⁄16" HUS484x10 85⁄8" HUS4104x12 105⁄16" HUS412

HUC412Concealed

Flanges

HUS412

HU68

HU min. nailingfill round holes.

HU max. nailingfill round andtriangle holes.

SIMPSON PRODUCTS

87

IS INSULATION SUPPORTSEasy one-hand installation to holdinsulation in place. Mitered edgesensure a tight fit when installedbetween joists.

Installation: Install insulationsupports between joists. IS16(151⁄2" long) for 16" o.c. spacing;IS24 (231⁄2" long) for 24" o.c.spacing. Follow the insulationmanufacturer’s installationrecommendations.

Size Code151⁄2" IS16231⁄2" IS24

LU FACE MOUNT HANGERSValue engineered for strength andeconomy! Just a tap of the hammerat each speed prong secures the LUfor easy nailing. Precision formed— engineered for installation easeand design value.

Codes: BOCA, ICBO, SBCCI No.NER-393.; Dade County, FL No. 96-0719.09; City of L.A. Nos. RR24947, RR 24818.

LSSU LIGHT SLOPED/SKEWED U HANGERSAll models are skew- and slope-adjustable on the job site! Attachjoists or rafters to headers, slopedup or down, and skewed left orright, up to 45º.

Material: 18 gauge.

Finish: galvanized.

Installation: attach the sloped joistat both ends so that the horizontalforce developed by the slope is fullysupported by the supportingmembers.

Codes: BOCA, ICBO, SBCCI Nos.NER-209, NER-421, NER-432. Cityof L.A. Nos. RR24949, 25074 and25076.

Joist Size Gauge W H B Code2x4 20 19⁄16" 31⁄8" 11⁄2" LU242x6, 8 43⁄4" LU262x8, 10 63⁄8" LU282x10, 12, 14 713⁄16" LU210

JoistSize W H Code2x8 19⁄16" 71⁄8" LSSU282x10 & up 19⁄16" 81⁄2" LSSU2103x10 & up 29⁄16" 81⁄2" LSSU310

415-824-4300

LSSU LSSU28

415-824-4300

SIMPSON PRODUCTS

88

LUS FACE MOUNT HANGERSA light duty joist hanger with thelowest installed cost. Speed prongssecure the LUS for easy nailing.

Joist Size Gauge W H B Code2’x4’ 18 19⁄16” 31⁄8” 13⁄4” LUS242’x6’,8’ 43⁄4” LUS262’x8”,10’ 65⁄8” LUS282’x10’, 12’, 14’ 713⁄16” LUS2104’x4’ 39⁄16” 3” 2” LUS444’x6’, 8’ 43⁄4” LUS464’x8’, 10’ 63⁄4” LUS484’x10’, 12’, 14’ 83⁄4” LUS4104’x12’ , 14’ 103⁄4” LUS414DBL 2 ’x4’ 31⁄8” 31⁄8” LUS24-2DBL 2 ’x6’, 8’ 47⁄8” LUS26-2DBL 2 ’x8’, 10’ 7” LUS28-2DBL 2’x10’, 12’, 14’ 9” LUS210-2

MONKEY PAW™ ANCHOR BOLT HOLDERSOffers significant savings overplywood or 2x wood holders. Usethe MKP5/8 to install the SSTB16,20, and 24. May be used severaltimes. Stabilizes bolt by providingthree-point support against lateralconcrete pressure. Alignmentarrows (left or right) match theSSTB bolt head arrow. Stamped for2x4 ro 2x6 mudsill placement. Nonut required to hold bolt in place.When removed, the MKP cleans thebolt thread of concrete.

BoltSize Dia Finish Code2’x4’ 5⁄8" galvanized MKP5⁄8

NAILSStrong-Tie nails and structuralfasteners have been developed asthe optimum fasteners forconnector products. Special lengthsafford economy of purchase andinstallation, and depth compatibilitywith framing members. Nailspecifications include head size,thickness, steel and shank design,and point configuration to ensureconformity to published values.

MetricDescription Equivalent Finish Code

(8d) 101⁄4GAx11⁄2" Smooth Shank 3.3MMx38.1MM HDG N8(10d) 9GAx11⁄2" Smooth Shank 3.8MMx38.1MM HDG N10(16d) 8GAx21⁄2" Smooth Shank 4.1MMx63.5MM Bright N16(20d) 0.192x21⁄8" Annular Ring 4.9MMx54.0MM Bright N20AN(20d) 0.192x13⁄4" Annular Ring 4.9MMx44.5MM Bright N20A0.250x21⁄2" Annular Ring 6.4MMx63.5MM Bright N54A

MKP 5/8” with SSTB16

PB POST BASESLocking prongs eliminate bolts orinserts in concrete. One-piecedesign assures maximum strength.

Finish: 12 gauge galvanized.

Installation: Holes are provided forinstallation with either 16dcommons or 1⁄2" bolts. A 2"minimum sidecover is required toobtain the full load. Notrecommended for non-top-supported installations such asfences.

Codes: BOCA, ICBO, SBCCI NER-443. Dade Co., FL No. 92-0828.05;City of L.A. RR 25149.

SIMPSON PRODUCTS

89

NAIL STOPPERSHelp prevent nails from piercingwater pipes and electrical lines.Installed over utilities that preventframing members the NS provides awarning and allows repositioning ofthe nail. 16 gauge steel conforms tothe National Electric Code. Installwith 8d commons or prongs.

Size Material Finish Code3" 16GA galvanized NS1

Size W1 W2 L1 L2 L3 No4x4 39⁄16" 39⁄16" 25⁄8" 11" 73⁄8" PC44-164x4 39⁄16" 39⁄16" 25⁄8" 11" 73⁄8" PC444x6 39⁄16" 51⁄2" 25⁄8" 13" 91⁄4" PC46-164x6 39⁄16" 51⁄2" 25⁄8" 13" 91⁄4" PC464x6 51⁄2" 39⁄16" 49⁄16" 11" 73⁄8" PC64-164x6 51⁄2" 39⁄16" 49⁄16" 11" 73⁄8" PC646x6 51⁄2" 51⁄2" 49⁄16" 13" 91⁄4" PC66-166x6 51⁄2" 51⁄2" 49⁄16" 13" 91⁄4" PC66

PC POST CAPS

Width Length Code39⁄16" 31⁄4" PB444" 31⁄4" PB44R51⁄2" 31⁄4" PB4651⁄2" 53⁄8" PB66

PLATE STRAPSMaterial L H Code16ga 11⁄2" 185⁄16" RPS18

11⁄2" 225⁄16" RPS2211⁄2" 285⁄16" RPS28

415-824-4300

NS1 or NS2

PB442” minimum sidecover

PC

RPS

415-824-4300

Size Material Code3" 16GA L305" L507" L709" L9033⁄8" 18GA LS3047⁄8" LS5063⁄8" LS70

L – Curved metal speed prong reduces labor andoverall construction cost. Staggered nail patternreduces the possibility for splitting and allowsinstallation on both sides of a member.

LS – Field-adjustable angles attach membersintersecting at angles. Bend one time only. Joistmust be constrained against rotation(for example, with solid blocking) when using asingle LS per connection.

Codes: BOCA, ICBO, SBCCI Nos. NER-413, NER-443; City of L.A. Nos. RR 25119, 25149

REINFORCING AND SKEWABLE ANGLES

SIMPSON PRODUCTS

90

PLYWOOD SHEATHING CLIPSSize Material Finish Code1⁄2" 20 gauge galvanized PSC045⁄8" PSC053⁄4" PSC06

PREDEFLECTED HOLDOWNSThe Predeflected Holdown (PHD) isa revolutionary development inholdown connections. Thisconnector is a predeflected duringmanufacturing, to virtually eliminatedeflection from material stretch.

Wood screws reduce slip due tooverdrilled bolt holes. Smallercenterline reduces eccentricity inthe stud. No stud bolts tocountersink. the slot in the seatprovides anchor bolt adjustment.Connectors 3" width fits easily on a4x wall.

Material: see table.

Finish: galvanized.

Installation: place over the anchorbolt. Install Simpson’s SDS1⁄4"x3"wood screws (sold separately.) Foran improved connection, use a steelnylon locking nut or a threadadhesive on the anchor bolt. To tiedouble 2x members together, thedesigner must determine thefasteners required to bind membersto act as one unit without splittingthe wood.

Codes: submitted to ICBO and Cityof L.A. in 10/96.

Gauge W H B CL Code14 3" 95⁄16" 27⁄8" 13⁄8" PHD2

119⁄16" 27⁄8" 13⁄8" PHD512 1313⁄16" PHD610 173⁄16" PHD8

PSCL

Provides1/8” gap

PHD

L70

SIMPSON PRODUCTS

91

ROTATED COLUMN END CAPSThe industry standard column cap.Precision factory gang-punchedholes speed installation.

Material: CC44, CC46, CC64, CC66are 7 gauge; all others are 3 gauge.

Finish: Simpson gray paint; may beordered HDG.

Options: straps may be rotated 90ºwhere W1% W2. For special,custom, or rough cut lumber sizes,provide dimensions. An optional W2dimension may be specified withany column size given (note that theW2 dimension on straps rotated 90ºis limited by the W1 dimension.)Column caps with W1, L, H1, andhole schedules different from theshown dimensions may be special

LengthWidth1 Width2 CC H1 Code35⁄8" 35⁄8" 7" 4" CC4435⁄8" 51⁄2" 11" 61⁄2" CC4651⁄4" 51⁄2" 13" 8" 8CC51⁄4-651⁄2" 51⁄2" 11" 61⁄2" CC66

LengthWidth1 Width2 ECC H1 Code35⁄8" 35⁄8" 51⁄2" 4" ECC4435⁄8" 51⁄2" 81⁄2" 61⁄2" ECC4651⁄4" 51⁄2" 91⁄2" 8" ECC51⁄4-651⁄2" 35⁄8" 71⁄2" 61⁄2" ECC6451⁄2" 51⁄2" 71⁄2" 61⁄2" ECC66

415-824-4300

SIMPSON STRONG-DRIVE®

4CUT™ INTERIOR ANDEXTERIOR SCREWThe Simpson Strong-Drive® screw (SDS) is a 1⁄4" diameter structural wood screw ideal for various connector installations as well as wood-to-wood applications. It installs with no predrilling and has been extensively tested in various applications. For 2007 the SDS is new and improved with a patented new easy driving tip and a corrosion resistant coating.

• The patented 4CUT™ tip has a squarecore and serrated threads to reduceinstallation torque and make drivingeasier with no predrilling and minimalwood splitting

• 3⁄8" hex washer head is stamped withthe No-Equal sign and fastener length for easy indentification after installation.

Size Qty Finish Code11⁄2" 25/BOX Double Barrier 9DBB142" 25/BOX 9DBB2021⁄2" 25/BOX 9DBB243" 25/BOX 9DBB3031⁄2" 10/BOX 9DBB3441⁄2" 10/BOX 9DBB446" 10/BOX 9DBB60

Size Qty Finish Code11⁄2" 300/CASE Double Barrier 9DBC142" 250/CASE 9DBC2021⁄2" 200/CASE 9DBC243" 150/CASE 9DBC3031⁄2" 125/CASE 9DBC3441⁄2" 100/CASE 9DBC446" 100/CASE 9DBC60

CC66

ordered. Provide a drawing toensure accuracy. For endconditions, specify ECC.L dimensions will vary from 51⁄2to 101⁄2. Uplift loads do notapply to the ECC. ECC9 and 10use four beam bolts.

• A new Double-Barrier Coating finish provides corrosion resistance superior to hot-dip galvanization. Now one screw can handle interior, exterior and certain pressure-treated wood applications

STANDOFF POST BASESProvides tested capacity. Features1" stand-off height above concretefloors, code-required whensupporting permanent structuresthat are exposed to the weather orwater splash, or in basements.Reduces the potential for decay atpost and column ends.

ABE and ABU’s base designincludes anchor bolt adjustmentslot. Four-sided stand-off plateincreases download support andprovides attractive appearance.

CBS and PBS embed into wetconcrete up to the bottom of the 1"standoff base plate. A 3" minimumside cover is required to obtain thefull load for CBS; 2" for PBS. Holesin the bottom of the PBS and CBSstraps allow for free concrete flow.

6 gauge, galvanized. Some productsavailable in Z-Max. Notrecommended for non-top-supported installations such asfences. For pre-poured anchors,embed 4& into concrete. For epoxyor wedge anchors, select and installaccording to anchor manufacturer’srecommendations; anchor diametershown in table. Install requireswasher.

Codes: BOCA, ICBO, SBCCI Nos.

NER-422, NER-432, NER-469;

City of L.A. Nos. RR 25064, 25074,

25158; Dade County FL No. 93-1016.1

415-824-4300

SIMPSON PRODUCTS

92

STRAP TIESPiling straps connect wood pilingsto floor girders in elevatedstructures. Hot-dipped galvanizedfor greater corrosion resistance.Install where plates or soles arecut, at wall intersections, and asridge ties.

Codes: BOCA, ICBO, SBCCI No.sNER-413 and NER-443; DadeCounty, FL No. 93-0828.7. City ofL.A. Nos. RR 25119, 25149.

Width Length Material Code21⁄16" 27" 12GA MST2721⁄16" 37" MST3721⁄16" 48" MST4821⁄16" 60" 10GA MST6011⁄2" 185⁄16" 16GA RPS18

225⁄16" RPS22285⁄16" RPS28

21⁄16" 95⁄16" 20GA ST29221⁄16" 1213⁄16" ST21223⁄4" 165⁄16" ST211521⁄16" 16GA ST621521⁄16" 235⁄16" ST622411⁄4" 215⁄8" ST2221⁄16" 3313⁄16" 14GA ST6236

W1 W2 D L HB Code39⁄16" 31⁄2" — 31⁄2" ABE4439⁄16" 31⁄2" — 3" 13⁄4" ABU4451⁄2" 51⁄8" 5" 13⁄4" 5⁄8" ABU6639⁄16" 31⁄2" 71⁄8" 21⁄4" 45⁄16" CBS4451⁄2" 57⁄16" 67⁄8" 3" 41⁄2" CBS6639⁄16" 31⁄2" 31⁄2" 21⁄4" 37⁄16" PBS44

ABE44


CBS44 PBS44

1” standoffsatisfies coderequirements3” minimum

sidecover


MSTI

SIMPSON PRODUCTS

93

TS TWIST STRAPSTwist straps provide a tensionconnection between two woodmembers. An equal number of rightand left hand units are supplied ineach carton unless orderedotherwise.

Material: 16 gauge.

Finish: galvanized. Some productsavailable in stainless steel and Z-Max.

Installation: use all specifiedfasteners.

Length Total Fasteners Code9" 8-16d TS9115⁄8" 10-16d TS12173⁄4" 14-16d TS18

SUR/SUL SKEWED 45º HANGERSStandardized and code-listed 45ºskewed hangers. Angled slotsdirect nails to allow speedy andproper installation of the nails.

Material: 16 gauge.

Finish: galvanized.

Installation: these hangers willnormally accommodate a 40º to 50ºskew. SUR=skewed right;SUL=skewed left. The joist endmay be square cut or bevel cut.

Codes: ICBO No. 5117; City of L.A.RR 24947; Dade County, FL No. 93-0824.07.

Joist Size W H B A1 A2 Code2x6,8 19⁄16" 5" 2" 1" 13⁄8" SUR/L262x10,16 19⁄16" 81⁄8" 2" 1" 13⁄8" SUR/L210

T AND L STRAP TIESMaterial L H B Qty Dia Code7GA ptd 6" 6" 11⁄2" 3 3⁄8 66L7GA ptd 8" 8" 2" 3 1⁄2 88L7GA ptd 12" 12" 2" 3 1⁄2 1212L7GA ptd 16" 16" 21⁄2" 4 5⁄8 1616HL7GA ptd 6" 5" 11⁄2" 3 3⁄8 66T7GA ptd 12" 8" 2" 3 1⁄2 128T7GA ptd 12" 12" 2" 3 1⁄2 1212T7GA ptd 16" 16" 21⁄2" 6 5⁄8 1616HT

415-824-4300

SUL

66T66L

TS

415-824-4300

SIMPSON PRODUCTS

94

U FACE MOUNT HANGERSThe standard U hanger providesflexibility of joist to headerinstallation. Some models havespeed prongs for fast installation.Versatile fastener selection withtested allowable loads.

Joist Size Gauge W H B Code2x4 16 19⁄16" 31⁄8" 11⁄2" U242x6,8 43⁄4" 2" U262x10, 12, 14 713⁄16" U2102x14, 16 10" U214DBL 2x4 31⁄8" 3" 2" U24-2DBL 2x6, 8 5" U26-2DBL 2x10 81⁄2" U210-2Rough 2x 4 2" 35⁄8" 2" U24RRough 2x 6, 8 55⁄8" U26RRough 2x10,12,14 91⁄8" U210R

TIE PLATESTPs are nail-on tie plates. TPAs areflanged for added support.

Material: 20 gauge.

FInish: galvanized.

Installation: holes are sized for 8dcommon or 8dx11⁄2" nails.

Width Length No of Nail Holes Code31⁄8" 11" 50 TP31141⁄8" 9" 54 TP4941⁄8" 11" 66 TP41153⁄4" 7" 60 TP57

TENSION TIESTension ties are ideal for retrofit ornew construction and provide post-pour, concrete-to-woodconnections. MTT28B amy beordered HDG; check with thefactory.

Codes: BOCA, ICBO, SBCCI No.NER-393; City of L.A. No. RR24818.

Strap Plate W L CL Code12GA 7GA 21⁄16" 27" 15⁄8" MTT28B

MTT28B

TP

U210

SIMPSON PRODUCTS

95

WALL BRACINGDesigned to fulfill the same codebracing requirements as 1x4 let-inbracing, but less expensive andfaster to install. Resists rackingduring construction. Not designedto replace shearwall load-carryingcomponents.

Material: 16 gauge.

Finish: galvanized.

Installation:

WB and WBC: install in “X” pairs orin opposing “V” fashion. Use with16" or 24" o.c. studs.

CWB: use with 16" o.c. studs.Established run-line using thebracing as a straight edge. Singlecut a saw kerf 1" deep along therun line. If the wall is pre-framed onthe floor, place the part into thesaw kerf, and put one nail into thetop plate, bottom plate and studsaccording to the nailing schedule.

Codes: BOCA, ICBO, SBCCI Nos.NER-413, NER-432, NER-443, NER-422; Dade County, FL. 93-0824.07:City of L.A. RR 25074, RR 25119,RR 25149.

Length Angle Wall Size Code9! 53⁄8" 8! 60º WB10611! 43⁄8" 45º WB12611! 43⁄4" WB126C11! 43⁄8" CWB126

UNIVERSAL FOUNDATION PLATEThe UFP10 Retrofit Foundation Platecuts installation time in half!Designed to connect when themudsill is offset from the foundationup to 21⁄2" or extended beyond thefoundation up to 1⁄2". UFP may beused in place of FA, HFA and FAP.

Material: 14 gauge.

Finish: galvanized.

Codes: City of L.A. RR 25281.

CodeUFP10

415-824-4300

UFP10 on astraight foundation withoffset mudsill

WB

COLUMN CAPW1 W2 L H Qty Code35/8” 35/8” 7” 4” EA CC44HDG51/2” 51/2” 11” 61/2” EA CC66HDG

WI WEDGEMaterial: 18 gauge.

Finish: galvanized.

Installation: use two 31⁄2" longwedges for each tie.

WT WEDGE FORM TIESEspecially designed for lowfoundation wall applications. 5⁄8"wide formed “V” design for rigidityallows accurate form spacing andsupport.

Material: 18 gauge.

Finish: galvanized.

Installation: not recommended forwall pours greater than 4! high. Fits1" or 2" nominal form lumber. Wallthickness from 6" to 12".

415-824-4300

SIMPSON PRODUCTS

96

Wall Thickness Code6" WT68" WT810" WT1012" WT12

Gauge Code18 W1

COLUMN CAPW1 W2 L1 L2 H Qty Code35/8” 35/8” 51/2” 61/2” 4” EA ECC44HDG51/2” 51/2” 71/2” 91/2” 61/2” EA ECC66HDG

WT8

W1

STAND OFF POST BASEW L H Qty Code39/16” 39/16” 21/4” EA AB44Z51/2” 59/16” 3” EA AB66Z

REGULAR POST BASES

POST CAP

SIMPSON PRODUCTS

97415-824-4300

REINFORCING ANGLEQty CodeEA L50ZEA L70Z

W L Qty Code39/16” 31/4” EA PB44Z51/2” 51/4” EA PB66Z

W1 W2 L1 L2 L3 Qty Code39/16” 39/16” 25/8” 11” 75/16” EA PC4416Z51/2” 51/2” 49/16” 13” 91/4” EA PC66Z

L50

L70

2” MINIMUM SIDECOVER

DOUBLE SHEAR JOISTHANGERS W H B Qty Code

19/16” 31/8” 13/4” EA LUS24Z19/16” 43/4” 13/4” EA LUS26Z31/8” 47/8” 2” EA LUS26-2Z19/16” 65/8” 13/4” EA LUS28Z31/8” 7” 2” EA LUS28-2Z19/16” 713/16” 13/4” EA LUS210Z31/8” 9” 2” EA LUS210-2Z39/16” 3” 2” EA LUS44Z39/16” 43/4” 2” EA LUS46Z39/16” 63/4” 2” EA LUS48Z

HOLDDOWNSHB4 SB W H B SO CL Qty Code49/16” 21/2” 23/4” 8” 29/16” 3/8” 17/16” EA HD2AHDG63/16” 31/2” 31/4” 149/16” 37/16” 9/16” 21/16” EA HD8AHDG

SIMPSON PRODUCTS

98415-824-4300

COLUMN BASES

W1 W2 D Qty Code39/16” 39/16” 8” EA CB44HDG51/2” 51/2” 8” EA CB66HDG

STAIRCASE ANGLESW H Qty Code101/4” 11/2” EA TA10Z

TA9Z

TA10

1 5/16" for 5/8" bolts1 1/2" for 3/4" bolts

SIMPSON STAINLESS STEEL CONNECTORS

99 415-824-4300

NAILSSize Gauge PCS/LB Code11⁄2" 8d .134 152 EA 96SSN811⁄2" 10d .148 122 EA 96SSN1021⁄2" 8d .131 94 EA 96SS8D3" 10d .148 67 EA 96SS10D31⁄2" 16d .162 44 EA 96SS16D

POST BASE

POST CAPS

FRAMING ANCHORSize Fastener Code17⁄16" x 21⁄2" 8-SSN8 9A34SSS17⁄16" x 3" 12-SSN8 9A35SSS

Size Fastener Code4 x 4 12-SS16D or 2-SS 1⁄2 MB & 5⁄8 Anchor Bolt 9ABU44S4 x 6 9ABU46S6 x 6 9ABU66S

Size Fastener Code4 x Stock 20-SS16D 9AC4SSS6 x Stock 28-SS16D 9AC6SSS4 x Stock 20-SS16D 9ACE4SS6 x Stock 20-SS16D 9ACE6SS

AC4SS ACE4SS

POST CAPSize Fastener Code4 x Stock 12-SS16D 9BC4SSS

or2-SS 1⁄2 MB


100415-824-4300

END COLUMN CAPANDCOLUMN CAP

Size Fastener Code4 x 4 4-SS 5⁄8 MB 9ECC44S4 x 6 6-SS 5⁄8 MB 9ECC46S6 x 6 6-SS 5⁄8 MB 9ECC66S

POST BASESize Fastener Code4 x 4 2-5⁄8 SSMB 9CB44SS4 x 6 2-5⁄8 SSMB 9CB46SS6 x 6 2-5⁄8 SSMB 9CB66SS

Size Fastener Code4 x 4 4-SS 5⁄8 MB 9CC44SS4 x 6 6-SS 5⁄8 MB 9CC46SS6 x 6 6-SS 5⁄8 MB 9CC66SS

HURRICANE TIESize Fastener CodeH2 10-SSN8d 11/2 9H2SSSSH2.5 10-SSN8d 11/2 9H25SSSH3 8-SSN8d 11/2 9H3SSSSH4 8-SSN8d 11/2 9H4SSSSH5 8-SSN8d 11/2 9H5SSSSH8 10-SS10d 11/2 9H8SSSSH10 16-SS8d 11/2 9H10SSS

End Column Cap Column Cap

End Column Cap

Column Cap


101 415-824-4300

LIGHT SHEAR JOISTHANGERANDLIGHT DOUBLE SHEARJOIST HANGER

SKEWABLE ANGLESize Fastener Code47⁄8" Long 8SS10D 9LS50SS

Size Fastener Code2 x 6, 8 8-SS10D 9LUS26SDBL 2 x 6, 8 8-SS16D 9LUS27S

Size Fastener Code2 x 10, 12, 14 12-SS10D 9LUS21SDBL 2 x 10, 12, 14 14-SS16D 9LUS22S

Size Fastener Code9” 5-1/4 x 11/2 SS Lag 9TA9SSS10” 7-1/4 x 11/2 SS Lag 9TA10SS

POST CAP UNIVERSALSize Fastener Code4 x Stock 24-SS16D 9LCE4SS

STAIRCASE ANGLE

Light ShearJoist Hanger

Light DoubleShear Joist Hanger

Light Shear Joist Hanger

Light Double ShearJoist Hanger

SIMPSON STAINLESS STEEL FASTENERS

102415-824-4300

MACHINE BOLTS STAINLESSSize Code1⁄2" x 41⁄2" 99M444S1⁄2" x 61⁄2" 99M464S5⁄8" x 41⁄2" 99M544S5⁄8" x 61⁄2" 99M564S

WASHERS STAINLESS

LAG SCREW STAINLESS

HEX NUTS STAINLESSSize Code1⁄2" 9HN04S5⁄8" 9HN05S

Size Code1⁄2" 99HW04S5⁄8" 99HW05S

Size Fastener Code1⁄4" x 11⁄2" 99L214S

SAFETY EQUIPMENT

103

SAFETY GOGGLESThese soft, vinyl goggles offerprotection for eyes against flyingparticles, dust and splash. Frame isperforated for maximum ventilation,has adjustable headband.

3M PARTICLE MASKStyle Description Qty Code8210# Nuisance Dust 20EA 95MASC

(double strap)8511# With Valve 10EA 95MASKV

Comfort Mask 5EA 95MAS1Sanding & Fiberglass EA 95MAS2

Paint & Finish EA 95MAS3Latex Paint & Odor EA 95MAS4

Woodworking & Welding EA 95MAS5

CodeZSPEC4

COMFO ELITE® RESPIRATORThe Comfo Elite Respirator providesprotection against a variety ofrespiratory hazards. The Comfo EliteRespirator, available in blacksilicone, has a unique sealingsurface designed to reducefacepiece slippage. The Comfo EliteRespirator comes in small, medium,and large sizes. NIOSH certified.

Size Description CodeEA Facepiece, Confo Elite, Silicone, Black, Small 95MAS6EA Facepiece, Confo Elite, Silicone, Black, Medium 95MAS7EA Facepiece, Confo Elite, Silicone, Black, Bigger 95MAS8

COMFO® RESPIRATOR CARTRIDGES Qty Code

1 PR 95MAS9

Below is a partial list of gaseous materials for which chemical cartridges respirators must not be used forrespiratory protection (for routine use) regardless of concentration or time of exposure. Failure to follow thiswarning can result in serious personal injury or death. This partial list is far from complete and is offered as a guide to many of the contaminants found in industry. Contact MSA for further information on other specific materials.Acrolein Hydrogen cyanide Nitric acid Phosphorus trichlorideAniline Hydrogen selenide Nitro compounds StibineArsine Methanol Nitrogen oxides Sulfur chlorideBromine Methyl bromide Nitroglycerin Urethane or otherCarbon monoxide Methyl chloride Nitromethane Diisocyanate-containing paintsDiisocyanates Methylene chloride PhosgeneDimethyl sulfate Nickel carbonyl Phosphine Vinyl chlorideCall 1-800-MSA-2222 for the latest information on 42 CFR 84 regulations and newly-approved respirators and cartridges.

***DefinitionsP100-Particular Filter (99.97% filter efficiency level) effective against all particulate aerosols. N95-Particulate Filter (95% filter efficiency level) effective against particulate aerosols free of oil; time userestrictions may apply.R95-Particulate Filter (95% filter efficiency level) effective against all particulate aerosols; time userestrictions may apply.Notes:1. Do not use in atmospheres containing less than 19.5 percent oxygen, in atmospheres containing gases or

vapors or in atmospheres immediately dangerous to life and health.2. Do not use in atmospheres containing less than 19.5 percent oxygen, or in atmospheres immediately

dangerous to life and health.3. Do not wear for protection against organic vapors with poor warning properties or those which generate

high heats of reaction with the sorbent material in the cartridge.4. 99.97 percent efficient against 0.3 micron DOP.

WARNING

Organic VaporOV AMMAFMHFMVMV

P100R95N95

CLSDCDHCHS*

ChlorineSulfur DioxideChlorine DioxideHydrogen ChlorideHydrogen Sulfide

AmmoniaMethylamineFormaldehydeHydrogen FluorideMercury Vapor

Filter Type & Efficiency****Escape only. **Effective against, but not NIOSH approved for Iodine Vapor

See Notes below 2,3,4

415-824-4300

415-824-4300

EAR PLUGSDisposable ear plug that fitscomfortably in ear canals. Hypo-Allergenic material.

Qty Code1 pair 95EAR21 box (200 pair) 95EAR1

KNEE PADS• Tough, hard plastic outer shell

covers and protects entire knee.

• Hinged for natural motion of theknee.

• 1⁄2” closed cell foam inner pad.

• Elastic woven straps.

• New speed clips just slip in place.

CodeZTOL30

SAFETY EQUIPMENT

104

SAFETY CONSTRUCTION HARD HATS• Constructed of durable high

density polyethylene.

• Heavy duty inner suspension.

• Meets safety standardrequirements.

• Adjusts to any head size.

Color CodeWhite ZHAT20Yellow ZHAT40

ADJUSTABLE BACK SUPPORT BELTSAdjustable size support belts withbuilt-in elastic suspender.Comfortable back support foreveryday use. Use to reduce orprevent lower back pain or strain.

Size CodeLarge ZBELTLMedium ZBELTM

SAFETY GLASSESLarge 3MM poly-carbonate lenses.Astro Spec 3000.

Color CodeClear ZSPEC1Gray ZSPEC2Mirrored ZSPEC3

LEATHER DRIVERS’ GLOVESTop grain cowhide, straight thumb,gun cut, taped cuff and shirredelastic for a snug fit.

LEATHER PALM GLOVESSplit leather, striped cotton back,straight thumb, clute and knit wrist.

CodeZGLOV2

CodeZGLOV1

SAFETY EQUIPMENT

105

EAR PLUGS WITH CORD• Disposable ear plug with cord.

• Fits comfortably in ear canal.

• Hypo allergenic material.

Qty Code1 pair 95EAR41 case (100 pair) 95EAR3

QUIET MUFF 24QM24 (NRR 24) is a three position,ultra-lightweight ear muff. Weighsonly 6 oz. for comfort duringprolonged usage. The high visibilityred cups and black band add styleto an extremely functional ear muff.Supplied with adjustable crownstrap for a secure fit when wornbehind the head or under the chin.Low cost cushions are easilyremoved for replacement.

Qty CodeEA 95EAR5

QUIET MUFF THUNDER 29Thunder 29 (NRR 29) is fullydialectric with extra long, paddedheadband for comfortable fit.Oversized vinyl cushions helpdistribute pressure evenly aroundthe outer ear for maximum usercomfort. Replaceable and washablesoft foam ear cushions are ideal forextended use.

Qty CodeEA 95EAR6

415-824-4300

415-824-4300

DOUBLE PALM GLOVEFront, back & cuff heather. Doubleleather palm patch reinforced.

COTTON GLOVESLarge cotton with straight thumb,clute cut, navy knit wrist.

SAFETY EQUIPMENT

106

CodeZGLOV3

CodeZGLOV5

ATLAS NITRILE TOUGH GLOVESThese gloves are the result of yearsof research and development. Likeall ATLAS® palm dipped gloves,they are ergonomically shaped, knitwithout seams, flexible,comfortable, extremely durable andmachine washable.

STRING KNIT/RUBBER COATED GLOVE• Stretchable poly/cotton blend.

• Breathable back.

• Rubberized palm for excellentgrip.

• Knit wrist seals out dirt.

CodeZGLOV4

VINYL DISPOSABLE GLOVES• Fits either hand.

• For industrial use only.

• Non sterile.

Size CodeExtra Large ZGLOV7

Size CodeMedium ZGLOV10Large ZGLOV11

PVC COATED GLOVESLarge neoprene coated, set-in wingthumb with red knit wrist, Protectsagainst cuts, abrasions, oil,sunlight, grease, chemicals, acidsand caustics.

CodeZGLOV6

107415-824-4300

YOUNGSTOWN GENERAL UTILITY PLUS GLOVESUnparalleled durability and value.The General Utility Plus is aversitile, full-finger work glove madefor adrasive conditions.Recommended for heavy duty work,construction and landscaping.

SAFETY EQUIPMENT

Size CodeLarge ZGLOV8

YOUNGSTOWN GENERAL UTILITY PLUS GLOVESUnparalleled durability and value.The Carpenter Plus shortened onthe middle and index finger andthumb to provide fingertip dexterity.Recommended for carpentry andassembly.

Size CodeLarge ZGLOV9

QUALITY IMPORTS RAIN SUITThree piece heavy duty. PVC,double laminated with fiberreinforced, jacket has detachablehood, double fly snap and zip frontclosure, ventilated cape back, twoside pockets with snap down flaps,adjustable snaps on cuffs anddrawstring waist. Bib overalls havesnap-fly suspenders and adjustablesnap cuffs. 100% water-proof, highvisibility yellow color. Made in China.

Size CodeLarge ZSUIT1XLarge ZSUIT2XXLarge ZSUIT3

CAUTION TAPEHigh visibility caution tape withcolor fast ink. Weather-proof forharsh out door conditions.

Size Code3”x1000’ ZTAPEC

RAIN BOOTSGeneral purpose PVC boots. Blackcleated sole. Reinforced moldedshank for extra support.

SAFETY EQUIPMENT

108

Size Code7” ZBOT078” ZBOT089” ZBOT0910” ZBOT1012” ZBOT12

COMMERCIAL/INDUSTRIALFIRST AID KITSNeat, orderly interior packaging isstandard equipment in every Pac-KitCommercial/Industrial First Aid Kit.

Size Qty Code61⁄2”x91⁄2”x23⁄4” EA 95SKIT

Adhesive Strips 50Large Wound Dressing 1Gauze Pads 5 (4”)Gauze Bandage, 4” 1Eye Pads 2Adhesive Taps, 1⁄2"x# yds. 1Triangular Bandage 1Elastic Bandage —Antiseptic Towelettes 10

First Aid/Burn Cream, 1⁄2 oz. 1Aspirin 10Eye Flush, 1 oz. 1Eye Flush, 4 oz. —Cold Pack 1Latex Exam Gloves 2 PRScissors 1Forceps 1First Aid Instructions 1

Contents:

SAFETY FENCEA low cost polymer grid developedfor temporary installations asfencing or traffic/safety control inand around construction sites, landfills and work areas. 13⁄8"x11⁄4" grid.

Size Color Code4’x100’ Orange ZTFEN2

415-824-4300

SUNDRIES

109415-824-4300

DIXON CRAYONNon-toxic, waterproof markingcrayons for use on oily, slick, wet,cold and dry surfaces. 41⁄2!hexagonal crayons.

NYLON MASON LINETwisted nylon twine is not damagedby cement or alkalines. Will not rotof mildew and may be stored wet.

STRAIT LINE CHALKChalk refill, micro fine for moremarking power. Packaged in plasticcontainers.

Size Type Qty Code100’ Stanley chalk reel EA HW0016100’ Irwin chalk reel HW0019

Size Color Qty Code5# Red EA HW00095# Blue HW00108OZ Red HW00138OZ Blue HW0015

Size Color Qty Code260’ Yellow EA HW0020

Lime/Green HW0021Pink HW0022

Orange HW0023

CHALK LINE REELUniversal hook has been designedto endure the rigors of everydayuse. Can be used as a plumb bob.

Color Qty CodeYellow EA ZA1000

Red ZA1001Blue ZA1002

Green ZA1003

FLIP STICK CRAYON/LUMBER PENCILCombines crayon & lumber pencil inone handy unit.

Color Qty CodeYellow EA ZA1004

Red ZA1005Blue ZA1006

Green ZA1007

415-824-4300

ELASTIC STRETCH CORDS• High quality cord, extra heavy

vinyl, coated hooks, quality rubberis covered with multicolor braid.

Size Code16” ZCOR1618” ZCOR1824” ZCOR2436” ZCOR36

LUMBER PENCILSMedium Lead Qty Code

EA ZA1008

MAX STRAPS• The industry standard for

securing loads on contractorsvehicles.

• 1” polyproylene webbing 750lbtest.

• Rust proof, zinc coated cambuckle.

Color Length CodeBlack 2’ ZCST02Red 4’ ZCST04Yellow 6’ ZCST06Green 8’ ZCST08Blue 10’ ZCST10Purple 12’ ZCST12Black 20’ ZCST20

ALL PURPOSE POLY ROPELightweight, all purpose rope isresistant to rot, mildew, petroleumproducts and most chemicals.

Size Qty Code3⁄8”x50’ EA 9TWINE

SUNDRIES

110

WORK HORSE• Holds up to 1,000 lbs per pair.• Push to open for easy set-up.• Folds flat for easy storage

and transport.

Qty CodeEA ZCLAMPA

SUNDRIES

111415-824-4300

DRYWALL (JOINT) TAPESelf-adhesive, fiberglass mesh.Repairs cracks and seals holes.

Size Qty Code300” EA 94TP30

CAUTION TAPEHigh visibility caution tape withcolor fast ink, weather-proof forharsh out door conditions.

DUCT TAPE–ALL PURPOSE• Poly-coated, cotton-cloth back.• Strong, tough.• Indoor or outdoor use.

3M BLUE PAINTERS PROFESSIONAL MASKING TAPEPainters professional masking tapedesigned for general, all purposeuse. Good tensile strength andadhesion.

Size Qty Code3⁄4”x60YD EA 94TP061”x60YD 94TP1011⁄2”x60YD 94TP142”x60YD 94TP20

Size Qty Code2”x 60YD EA 95TAPE

Size Qty Code3”x1000’ EA ZTAPEC

VINYL ELECTRICAL TAPESize Color Qty Code3⁄4”x60’ roll Black EA 95TAPEE

RED VINYL TAPESize Color Qty Code2”x60’ roll Red EA 95TAPER

415-824-4300

DRYWALL TAPE21⁄6" wide rolls in lengths of 250!and 500!. Special long cellulosefiber paper, buffed and creased tomeet professional standards.

FLEXIBLE METAL CORNER TAPESpecialized drywall tape ideal foruse on cathedral ceilings, archways, bay windows, etc. Versatileenough to use where standardcorner beads are impractical. Twogalvanized-steel strips assure aperfect, reinforced corner atvirtually any angle. No specialadhesive required just apply withregular drywall joint compound.

Size Qty Code250’ EA 94TP25500’ 94TP50

Size Qty Code100’ EA 94TP60

DUROCK MESH TAPESize Qty Code2”x50’ EA 94TPDR

SUNDRIES

112

HANDVAC DRYWALL SANDER• Dustless drywall sanding is now

a reality.

• Designed for use with a standardwet/dry shop vac.

• Captures the finest dust particlesas the wall is being sanded.

Size Code35⁄16”x11” 94TP70

POLE SANDER• Universal swivel head.

• Uniform sanding pressure can beapplied even to the hardest toreach places.

• Designed for use with anystandard accessory pole.


BENT PUTTY KNIFE

MUD PANSFully tapered sides and ends reduceweight.

FLEXIBLE PUTTY KNIFETempered steel blade securelyfastened to handle. Full, flexibletaper ground blade.

TAPING KNIFETaping knife, Feature a one piecesteel blade mounting, welded to ablue clock spring steel blade. Onepiece folded mounting which isstronger than conventional steelknives. Proper blade flex isguaranteed for effortless taping.

SUNDRIES

113415-824-4300

Size Qty Code8” EA 94TK0810” 94TK10

Size Qty Code11⁄2” EA 94TK142” 94TK2041⁄2” 94TK04

HAND SANDER• Allows for uniform pressure to

be applied when sanding dry wall joints.


TAPING MUD

Size Qty Code6”x18” EA 94TP18

Size Type Qty Code1QT Waterproof EA 94MUD11GAL All Purpose 94MUD24GAL All Purpose 94MUD34GAL Topping 94MUD44GAL Easy San Plus 3 94MUD518# Hot Mud 20min 94MUD618# Hot Mud 45min 94MUD718# Hot Mud 90min 94MUD8

Size Qty Code11⁄4” EA 94TK12

DRYWALL JOINT KNIFE• High carbon steel

• Hammer Head® end forsetting nails

Size Qty Code6” EA 94TK06

STANLEY REPLACEMENT UTILITY KNIFE BLADESBlades are interchangeable withmost other makes of utility knives.

415-824-4300

BONDO SPREADERQty Code3EA 94TK40

SCRAPERSFinest quality, replaceable blades,makes tough jobs easy.

Size Qty Code11⁄2” EA 94TK213” 94TK26

Replacement Blade Qty Code1 1⁄2” EA 94TK243” 94TK28

SUNDRIES

114

UTILITY KNIFECodeZA1015• Retractable blade.

• Safety 3 position blade exposure.

• Heavy duty zinc die castconstruction.

RAZOR BLADE SCRAPERUses single edge razor blades. Paintscraper, 4" length, with changeableretractable blades. Individuallycarded with five replacementblades.

Size Qty CodeEA 94TK30

Single EdgeRazor Blades Qty Code

5EA 94TK34

Qty Code5EA HW0092

100EA HW0093

SWIVEL-LOCK® RETRACTABLE UTILITY KNIFE Code

ZA1010• Handle swivels open for quickeasy blade change, no need for ascrewdriver.

• Interlocking nose, aluminum bodyfor maximum durability.

• Large, comfortable design.

• 3 blades in handle.

COUNTER BRUSHThicker and longer than thecompetition. Exploded tip bristelsfor picking up the finest wood dust.

Size Qty Code12” EA PB600

SUNDRIES

115415-824-4300

LATEX BRUSHA blend of white Chinese bristleand brown polyester filamentswith wood handles. Designed forall latex-based paint.

PURDY XL OIL/LATEXPROFESSIONAL BRUSHESNylon and polyester blend. Highlyrecommended for both interior andexterior painting projects.

FOAM PAINT BRUSHEasy to use disposable foam brush.Use to apply all types of paints,stains, varnished and urethanes tosmooth surface and corners.

Size Qty Code11⁄2” EA PB14002” PB20003” PB30004” PB4000

Size Qty Code11⁄2” Angled EA PB5000

Size Qty Code11⁄2” Angled EA PB60142” PB602021⁄2” PB60243” PB6030

Size Qty Code1” EA PB10012” PB10023” PB10034” PB1004

THROW AWAY BRUSHWhite natural bristles withunfinished wood handles. Ideal forapplying glue, sweeping chips offmachinery and single-useapplications.

Size Qty Code2” EA TB200021⁄2” TB24003” TB30004” TB4000

MIXERPAINTPAINT MIXER

415-824-4300

• Heavy gauge chrome plated steelframe.

• Five-wire chrome plated steel cage.• Convex center wires to prevent

cover from slipping.• Rim nylon end caps to secure

paint cover.• Comfort grip 6" handles internally

threaded for extension pole.

WHIZZ FINE FINISHINGPremium Sponge: small celledseamless sponge for minimalbubbling and stippling with alkydenamel varnishes and urethanerounded edges eliminate laps.

Size Qty CodeFine Finish Tool12” handle w/4” roller 1 EA PD57600

4” replacement roller 2 EA PD540606” replacement roller 2 EA PD54064

4” prem. sponge pan set4” ps, 12"handle, 6"x14" pan 1 EA PD57614

Qty CodeEA PF0009

9" BIRD CAGE PAINT ROLLER

SUNDRIES

116

PAINT MIXERPower driven mixer 3” impeller

• For use with electric drill.• Mix drywall compound,

driveway sealer, paint,waterproofing coating, etc.

• Corrosion resistance • Easy clean-up

Size Code31⁄4” (For 3/8” power drills) PTM314

Size Code4” (For 1/2” power drills) PTM400

Qty Texture CodeEA 3/PK Fine HW5000EA 3/PK Medium HW5001EA 3/PK Coarse HW5002

BRONZE WOOL• Flexible wool abrasive that is

great for stripping, sanding,smoothing and polishing.

• Unlike steel wool—which canleave behind small fibers thatcorrode and discolor wood—bronze wool resists shredding,rust, and corrosion.

Qty Texture CodeEA 8/PK #1 Medium HW5005EA 8/PK #0 Fine HW5010EA 8/PK #00 Very Fine HW5020EA 8/PK #000 X Fine HW5030EA 8/PK #0000 Super Fine HW5040

STEEL WOOL

SUNDRIES

117415-824-4300

SCRUBS HAND WIPESWhen hands are really soiled andthere isn’t any soap, and there isn’tany water. No rinsing, no drying, noresidue.

Code95SCRB

ORANGE GOOP HAND CLEANER• Fresno orange scent in a tough,

natural liquid hand cleaner.

• No harsh solvents.

Size Qty Code5oz EA 95SCRO

11” PAINT ROLLER TRAY744; Paint roller tray, 11” brightmetal.

9” ROLLER COVERSSYNTHETIC FIBERS

PLASTIC 11” ROLLER TRAY LINER

Qty CodeEA PT0009

Qty CodeEA PT0010

Texture Qty CodeSmooth EA PR0001Medium PR0002Rough PR0003

• For use with all paints andcoatings on most surfaces.

• 3⁄8” thick nylon.• Plastic core.

415-824-4300

WHITE RAGS• Wiping and polishing cloth rags. Size Code

5# 95SRAG1

PUSH BROOMS• Coarse bristle

• Medium/fine bristleSize Desc. Qty. Code18” Coarse EA ZPUSH124” Coarse EA ZPUSH218” Medium/Fine EA ZPUSH324” Medium/Fine EA ZPUSH4

Janitor’s Broom EA ZPUSH6Deck Scrub Brush EA ZPUSH7

DUST PANS• Utility

• YardSize Qty. Code12 3/4” EA ZPAN1218” EA ZPAN18

SUNDRIES

118

SWEEPING COMPOUNDRecommended use on unfinishedfloors for oil, sand, and sawdust.

Size Code50 lb. ZPUSH50

SUNDRIES

119415-824-4300

PAINT POURERFits any standard US gallon or 4liter can. “No-drip” spout forcleaning and easy pouring.

PAINT BUCKETSWhite plastic utility bucket for paintmixing and more.

PLASTIC SHEETINGPolyethelene construction film.

Size Qty Code1GAL EA PA2000

Size Qty Code2GAL EA PA10005GAL EA PA5000

4 Mil (clear) Code10x50 91P10512x50 91P12520x50 91P20520x100 91P210

6 Mil (black) Code10x50 91Q10512x50 91Q12520x50 91Q205

BUCKET CADDY• 32 Pockets.

• 12 inside, 20 outside.

• Made of 600 Denier polyester.

• Fits most 5 gal buckets.

CodeZTOL90

415-824-4300

FLUORESCENT BOX ALUMINUM LEVELS WITH HANDHOLDS

TORPEDO LEVELS

STANLEY ALUMINUM LINE LEVELSpecial hooks hold to line—allowslevel to slide freely for easypositioning. Bottom flat for surface leveling.

WOOD CHISELS

CodeZA1075

CodeZA1070

Size Code24” ZA105036” ZA105548” ZA106072” ZA1065

Size Code1⁄4” ZA10203⁄8” ZA10211⁄2” ZA10225⁄8” ZA10233⁄4” ZA10241” ZA102511⁄4” ZA102611⁄2” ZA10272” ZA1028

• Durable aluminum cast frame.• Vials replaceable in seconds.• Ideal for pipe and conduit work.• Tinted 360º vials for easy reading.• Magnetic strip allows free hand

operation on metal surfaces.

Most durable level on the market.

• Extra thick, ribbed wall aluminum box beam.• Powder coated, baked finish in high-visible

safety yellow.• Easy to clean, resistant to scratches.• Solid acrylic barrel shaped vials, glare

resistant setting.• Magnified horizontal vial visible in darkness.• Shock absorbing end caps.

• Extra long handles with crownedstrike cap.

• High carbon, heat tempered blade.• Precision ground cutting edge.• Blade tip guard (with sharpening

guide) provides blade protectionand safety.

• Width identification on blades.• Carded.

SUNDRIES

120

HAND TOOLS

121415-824-4300

COMBINATION SQUARE

6" QUICK SQUARE® TOOLThis layout tool works as a raftersquare, tri square, protractor andpower saw guide. It‘s heavy dutycycolac body is lightweight andcompact to fit conveniently intopocket of tool belt.

STEEL RAFTER SQUARES

STANLEY WOOD T BEVELHardwood handle with recessedgrip area, inlaid brass tips andsecondary locking device.

Size Code12” ZA108016” ZA1081

CodeZA1085

CodeZA1090

CodeZA1095

• High strength stainless steel fordurability and long life.

• Individually inspected for accuracy.• Deep graduations are filled with

yellow paint for superior readability.• Surface protected to resist corrosion.• Tell-sell sleeve.

• Die cast metal handle.• Solid brass knobs.• Dial individually regulated to

ensure accuracy.• Coated blade resists rust.• Inside and outside try square.• Unique high visibility black blade

with deep etchings filled withyellow paint.

STAIR GAUGE SET CodeZA1104

• Attaches easily to all metalsquares.

• Solid brass.• Fast and uniform layout in repetitive

work, including angle cuts onrafters and stair stringers.

415-824-4300

BRASS PLUMB BOBReplaceable Nickel Plated Tips.

Cast in one piece. Cap permitsattachment of cord. Hardenedreplaceable tips. Individually carded.

Size Code8OZ ZA110116OZ ZA1102

STANLEY COPING SAW BLADESHigh quality spring steel. 63⁄8"length, five blades per card.

STANLEY COPING SAWSHandle of rich, walnut stainedhardwood. Blades are high carbonsteel—hardened and tempered togive clean cutting action.

COMPASS SAWS

PROFESSIONAL DOVETAIL SAWCuts a true, smooth and narrowkerf. Comfortably designedhardwood handle provides positivegrip. Fine cutting 13 point blade.Reversible and flush cutting.

Qty Code6/box ZA1140

Size Type Qty Code63⁄8” 20th x hard 5EA ZA1145

10th ZA114620th ZA114732th ZA114815th ZA1149

CodeZA1125

Size Code10” ZA1120

• High grade tempered steel blade.• Induction hardened teeth stay

sharp longer than non-hardenedteeth.

• Teeth precision set and sharpenedfor fast and smooth cutting.

HAND TOOLS

122

Qty CodeZA1130

Replacement Blade Qty Code12x18th EA ZA113312x24th ZA113212x32th ZA1131

HAND TOOLS

123415-824-4300

HIGH TENSION HACKSAW

JACK SAWProduction hardened to preservesharpness. Cutting size is 3 to 5times longer than standard teeth.

Size Code15”x8pt ZA112220”x8pt ZA1123

• Rugged design for heavy duty use.• Fully adjustable tension–holds

blade at up to 32,000PSI, whichprovides longer blade life and fast,accurate cuts.

• Blade storage in frame.

• Quick release blade changingmechanism in handle, maintainstension setting.

• Tension guide on handle lever.

• Blade extended out nose of framecan be locked into place for tightcorners work.

• Tell-sell sleeve.

JAPANESE HARDWOOD SAW #651 Size Description Code

240mm Saw ZA1114Replacement Blade ZA1116

JAPANESE BACK SAWRUBBER GRIP #3072 Size Description Code

240mm Saw ZA1115Replacement Blade ZA1117

HAND TOOLS

124 415-824-4300

STANLEY NAIL SETSRounded knurled body. Alloy steelhardened and tempered. Tips arecupped and chamfered. Blackphosphate finish. 5⁄16! square headprevents rolling. Individually skincarded. 4! O/A length.

STANLEY NAIL SET PACK58-230; Assortment of 3 Nail Sets. One each of 1⁄32!, 2⁄32!, 3⁄32!.Individually carded.

WOOD MITER BOXHard rock maple wood miter box.Has a 45º face angle that permitscutting of wide mouldings up to35⁄8!. Front lip prevents slipping.

CodeZA1113

CodeZA1220

COPY CAT GAUGECodeZA1240

Tip Qty Code1⁄32! EA ZA11102⁄32! ZA11113⁄32! ZA1112

SHARK SAW DOVETAIL AND DETAIL SAW• Dowel/dovetail/detail saw.

• Great for fine craftwork.

• Flush cut and any detail work.

• Simple push button release onhandle allows for compactstorage.

Size Code61/2” ZA1118

WORK HORSE• Holds up to 1,000 lbs per pair.• Push to open for easy set-up.• Folds flat for easy storage

and transport.

Qty CodeEA ZCLAMPA

HAND TOOLS

125415-824-4300

YARDSTICK/STRAIGHT EDGE• High grade special aluminum alloy.

• Light weight and strong.

• Black thermo-bonded gradiations.

• High grade aluminum alloy.• Black thermo-bonded gradiations.• Thermally fused, powder paint

finish.

WALLOARD SQUARE

Size Qty Code36” EA ZA109748” EA ZA109872” EA ZA1099

Size Qty. Code47 7/8” EA ZA1096

STANLEY® HEAVY-DUTY STEEL LONG TAPES

STANLEY® HEAVY DUTY POWERLOCK® TAPE RULES

Size Code3⁄8”x50’ ZTAPE63⁄8”x100’ ZTAPE7

Size Code3⁄4”x16’ ZTAPE31”x25’ ZTAPE41”x30’ ZTAPE5

• Heavy-duty mylar “blanket-wrap”coating extends blade life up toten times longer.

• Extra strong, thicker blade.• Impact resistant safety yellow

case.• Stainless steel roller cage for

smooth blade action.• Strong corrosion-resistant two

position hook.

• Heavy duty spring, blade and hoodsystem.

• Thicker blade, longer standout.• Larger spring.• Three rivet hooks.• Improved blade readability with

high contrast color.• Heavy-duty mylar “blanket-wrap”

coating extends blade life up toten times longer.

PRO TAPE MEASURE25’ 1” Blade 3 Rivit TipGreat rubber outer with easy readblade. Best quality with side break.

Size Qty Code1” X 25’ EA ZTAPE8

HAND TOOLS

126 415-824-4300

STANLEY INTELLISENSORSTUD AND JOIST LOCATOR• Scanning technology accurately

detects and locates studs andjoists behind plywood anddrywall.

• Fully automatic calibration.

• Audio/visual detection.

• Easy to use instructions.

Qty CodeEA ZA1030

STUD SEEKER™• Locates wood or metal studs in

sheetrock™, paneling, plywood,and flooring up to 3/4! thick.

• Compact size easily fits in shirtpocket.

• Durable ABS housing; can bethrown in tool box.

Qty. CodeEA ZA1035

Level, align and plumb withunparalleled ease and accuracy and speed.Easily squares at 45º. Anodizedplanted for protection and durability.Threaded mount for use as a transit.Level is accurate and aligned from allplanes of reference. Field adjustablefor windage and elevation. Vertical,horizontal and 45º vials.• Precision made in the USA.• Designed and sized for portability.

• Manufactured to aircraft standardsin materials and plating.

• Water and shock resistant.• Field adjustable.• Accurate to .250 at 30"/10 meters.• Laser gunsight technology.

QUINT® MEASURING SYSTEMS SIZE CODE7” ZA130712” ZA131218” ZA131823” ZA132330” ZA133036” ZA133648” ZA134860” ZA136096” ZA1396

Value Pack 7”–12” CodeZA1399

Accessory Dial CodeZA1304

CodeZTOOLA

AccessoriesMagnetic base ZTOOLBSoft case ZTOOLC

The Original True Angle™.

When you are away from a draftingtable or computer, you may stillcalculate difficult angles quickly andeasily.

• Adjustable 360º protractor.• Comes in various lengths.• Defines, measures and makes

angles in seconds.

CHECK POINT LASER LEVEL

STANLEY CONTRACTOR GRADE™LOW ANGLE PLANEFully adjustable mouth and cutter. Cutterrests at 21˚ angle for end grain work.Comfortable finger grips in sides. Bottomand sides machined perfectly flat andtrue. Repaceable cutter.

HAND TOOLS

127415-824-4300

Qty Inches mm Inches mm CodeEA 6 150 1 5⁄8 40 ZA1017

Length Cutter WidthSTANLEY CONTRACTOR GRADE™BLOCK PLANECast iron bottom and sides are groundperfectly flat and true. Fully adjustablecutter rests at 21˚. Adjustable mouthopening for course or fine work.Comfortable finger grips on sides.Replaceable.

Qty Inches mm Inches mm CodeEA 6 150 1 3⁄8 35 ZA1018

Length Cutter Width

LED-LENSER TURBO TORCHESTwo German optoelectric engineers,Rainer and Harold Opolka, first designedthese revolutionary NEW lightinginstruments in the late 1990’s. Sevenyears and 14 patents later, LED-Lenser“Turbo Torches” are available for theconsumer market from Coast. Byemploying State-of-the-art computer chiptechnology, these unique lightinginstruments provide a higher level ofenergy efficiency and greater brightnessthan conventional lights.

Key Chain Qty CodeEA ZA1999F

V2 TRIPLEX• 3 spot power beam.

• 100 hrs. of light withouta battery change.

• 3 Photon tube Reflectors.

• 3 Diode-charged systems.

• 5 7/16 in. length.

• Includes sheath.

Qty CodeEA ZA1999G

VAUGHAN FIBERGLASS HAMMERS

“Pro-16”® Straight ClawVaughan’s patented, hollow-corefiberglass handle provides betterbalance and more effective shockabsorption than typical solid fiberglasshandles. Head “Sure-Lock®”wedged andepoxy sealed. Slip-resistant grip,contoured for comfort.

VAUGHAN CALIFORNIA FRAMERThe Vaughan California Framercombines features of two of ourmost popular tools into a rugged,heavy construction hammer. Thesmoothly swept claws wereborrowed from our “999” RipHammer, and the extra large strikingface, hatchet eye and sturdy handleare a heritage of our Rigbuilder’sHatchet. The hatchet style handle isbest grade, second growth hickory.To provide extra strength, the handlehas a large cross section where itjoins the fully polished head. Availablewith either smooth or milled face.

HAND TOOLS

128

VAUGHAN RIPPING HAMMERSTRAIGHT CLAW16 oz. “99” PRO-16®

Available with either smooth or milledface, this is a nicely proportionedhammer for all-around use. Top quality,white hickory handle is triple wedged.

20 oz. “999”® Framing Available with either smooth or milledface, its superb balance and comfortablegrip make this hammer a favorite oftradesmen. Top quality, white hickoryhandle is triple wedged.

24 oz. “505” FramingAvailable with either smooth or milledface, this framing hammer sets theindustry standard for appearance andbalance. Top quality white hickoryhandle is triple wedged.

Head Weight Length CodeSmooth 16 oz. 13” ZW2001

Head Weight Length CodeSmooth 20 oz. 16” ZW2005Milled Face 20 oz. 16” ZW2010

Head Weight Length CodeStraight 16 oz. 131/2” ZW2025Smooth 20 oz. 14” ZW2026Smooth 20 oz. 16” ZW2027Milled 20 oz. 16” ZW2028

Head Weight Length CodeSmooth 24 oz. 17” ZW2015Milled Face 24 oz. 17” ZW2020

VAUGHAN’S VANADIUMCLAW NAIL HAMMERFull polished head with octagonneck and round face. Top quality,white handles, triple wedged andepoxy sealed for “Sure-Lock®”handle tightness.

Head Weight Length CodeSmooth Curved Claw 13 oz. 121/2” ZW2030Smooth Straight Claw 16 oz. 13” ZW2035

Head Weight Length CodeStraight Handle-Milled 23 oz. 17” ZW2040Curved Handle-Milled 23 oz. 17” ZW2045

415-824-4300

ALL STEEL RIPPING HAMMERSForged one-piece solid stealconstruction, eliminates loose heads.

415-824-4300

HAND TOOLS

129

HAND DRILLING HAMMERForged high carbon steel head. Fullyheat treated and tempered. 3LBS,handle length 101⁄4!.

Head Weight Length Code3lbs 101/4” ZW80254lbs 12” ZW8120

SLEDGE HAMMERForged, high carbon steel heads.Hardened and tempered. Facesmachined and polished. Selectedhickory handle.

Head Weight Length Code8lbs ZW801512lbs ZW8020

COMPO-CAST STANDARD HEAD MODELS SOFT FACE HAMMERSNon sparking soft face hammers ofUNICAST construction have noexposed metal. The soft face yields,doesn’t mar surfaces or equipmentand doesn’t absorb liquids.

Head Weight Length Code2LBS ZW80103LBS ZW8012

Head Weight Length Code16OZ ZW600024OZ ZW7000

DRYWALL HAMMERSForged one-piece solid steelconstruction, eliminates loose heads.

Head Weight Length Code16OZ ZW5000

DALLUGE STRAIGHT CLAW HAMMER• Straight claw• Mill/Magnetic nail holder

Head Weight Length CodeMill/Magnetic Nail Holder 21 oz. 18” ZW2050

ESTWING NYLON-VINYL GRIP FRAMING HAMMER• Straight claw

Head Weight Length CodeSmooth Face 22 oz. 16” ZW6001Milled Face 22 oz. 16” ZW6002

HAND TOOLS

130

RAILROAD PICK

Description CodeHead ZA2010Handle ZA2011

PROFESSIONAL SHOVELStyle CodeRound Point ZA2000Square Point ZA2001

POST HOLE DIGGERCodeZA2005

REINFORCED GARDEN HOSESize Code5⁄8”x50’ ZA2016

PM5; 6LB railroad pick made of dropforged high carbon steel, tempered forstrength and efficiency.

Dirt shovel, square point carbon steelblade (97⁄16”x111⁄8!), forward turnedsteps, heat treated steel handle,power collar reinforces the socketand handle attachment.

28004(33); Professional Herculespattern, designed for hard soils. Highcarbon steel blades, 61⁄2” pointspread, blade stops. 91⁄2”x61⁄2” bladesize, 4’ handle.

Three-ply construction consists ofvinyl tube, tire cord reinforcing, clearcover for good pressure capacity andflexibility. Includes solid brasscouplings and attractive white stripe.

415-824-4300

Size . Code91⁄2”” ZTOOL2

415-824-4300

HAND TOOLS

HEAVY-DUTY POLY CLAD AQUA GUN Code

ZA2020

NAIL PULLERSSize Code12” ZA124314” ZA1245

HEAVY DUTY CROWBARGORILLA BAR Size Code

18” ZA122524” ZA122636” ZA1227

Heavy-duty Aqua Gun. Threadedadapter and soft poly clad body.Insulation from hot or cold water. Solid brass system and sprayadjustment knob. Cushioned hand grip for comfort. Locking clip holdsspray in any pattern.

• Super quality.

• Drop forged chrome vanadium.

• Flat I-bar construction.

• Pulls nails easily even after heads snap.

91⁄2” TRIM BAR

RIPPING BAR WITH SLOTTED CLAW AND CHISEL END Size Code

24” ZA122336” ZA1224

Goose neck pattern. High carbon steel for extra strength; chisel andbeveled. Claw and chisel end polished,claw slotted.

Corrosion resistant coating.Electrocoated high carbon steel;hardened and tempered. Groundscraping ends. Nail Slot.

HOSE NOZZLEHeavy-duty brass hose nozzle. Code

ZA2018

131

Size Code18” ZA1231

HAND TOOLS

132

15” SUPERBAR®Forged and spring tempered.Polished rocker head for greater leverage.

CodeZTOOL1

AMERICAN TOOL™ VISE GRIP LOCKING C-CLAMPS Size Code

6” ZA118011” ZA1182

AMERICAN TOOL™ VISE GRIP LOCKING PLIERS Size Code

4” ZA11846” ZA1186


5” ZA11887” ZA119010” ZA1196

Long nose locking pliers with wirecutter. Made of high-grade alloysteel. Heat treated for durability andfinished in bright nickel-plating.

Made of high grade alloy steel. Heattreated for durability and finished inbright nickel-plating. Adjusts inseconds, regular tip ideal forclamping wood, plastic and metal.

Curved jaw locking pliers with wirecutter. Made of high-grade alloysteel. Heat treated for durability andfinished in bright nickel-plating.

PRY BARSize Code8” ZA124610” ZA1247

PRY BAR

415-824-4300

• Made with high quality carbon steeland the thinnest blade available onthe market.

• Will pry into any tight spot withease and less damage to wall andmolding surface.

415-824-4300

AMERICAN TOOL™ QUICK GRIP BAR CLAMP

HAND TOOLS

133

Size Code6” ZA120012” ZA120118” ZA120224” ZA120336” ZA1204

Size CodeSmall ZA1197Large ZA1198


7” ZA119210” ZA1194

Straight jaw locking pliers. Made ofhigh grade alloy steel. Heat treated for durability and finished in brightnickel-plating.

Quick grip bar clamp. high tech resinconstruction is strong yet light weight.One hand operation with positivelocking action to hold work tight.Quick release trigger. Large pliablepads won’t mar work.

WS-3; Bessy™ Angle Clamp is aunique, versatile clamp that isdesigned to always hold, fix, and alignmaterial at a 90º angle. Rear jawswivels allowing one to hold differentmaterial thicknesses always at 90º.Ideal for many applications, i.e.cabinet work and framing.

BESSY™ ANGLE CLAMP

ADJUSTABLE CLAMP “PONY” SPRINGS CLAMP

Open O/ABtwn Jaws Jaw Length Code1” 4” ZA11712” 6” ZA11723” 9” ZA11734” ? ZA1174

Use what ever “spring pressure” isadequate, and especially where speedis essential. Steel jaws, heavily platedfor smooth, bright finish and to preventrust. Heavy, tempered steel springs.Protected handles and tip.

END CUTTING NIPPERS CodeZA1233

Size QTY Code12” EA ZA1302A14” EA ZA1302B

HAND TOOLS

134

ULMIA™ MITER CLAMP KIT Size Code3⁄8”–31⁄2” ZA3100

AVIATION SNIPSStyle CodeLeft ZA1300Right ZA1301Straight ZA1302

CHANNEL LOCK 9”IRON WORKER PLIERS Code

ZA1230

These unique and effective clampsfill many varied clamping jobs thatwould otherwise be almostimpossible to manage. The miterrings (A–F) have sharp tips that drawa mitre joint together. Mitre ringcapacity is the moulding size the ringwill clamp. These are strong rings, soan application tool is necessary.Woodworkers that have used theseswear by them!

Forged blades of high strength steel.Designed for rapid outside trim andclean cuts.

350S; 9” iron worker pliers. Heavy-duty, precision made of special gradedropped forged steel. Speciallydesigned for tying concretereinforcing bars. Coiled spring forpositive jaw opening. Perfectly mated cutters are hand honed,properly hardened to hold their edge.Channel-Lock Blue® dipped plasticcomfort grips.

415-824-4300

ALUMINIUM SNIPSBlades are easily replaced using only ascrewdriver. Made from top qualitymaterials. Designed for maximumstrength and minimum weight.

Size QTY Code12” EA ZA1302C14” EA ZA1302D

REPLACEMENT BLADESFOR ALUMINIUM SNIPS

415-824-4300

HAND TOOLS

135

b

4-IN-1 RASPCodeZA1232

22-100; Blade manufactured from highcarbon file steel. 4-way for differentcutting surfaces. One side offers a flatrasp and double cut file. The otherside offers a half round rasp anddouble cut 8” length.

CHANNEL LOCKTONGUE AND GROOVE PLIERS Size Code

10” ZA125012” ZA1253

• Right angle teeth grip in alldirections.

• Undercut tongue and groove won’tslip.

• Permalock fastener eliminates nutand bolt failure.

CHANNEL LOCKLONG NOSE PLIERS Size Code

81/2” ZA1255• Cross hatching on jaws.

• Perfectly mated cutter heattreated to hold its edge.

• Polishes high carbon drop forgedsteel.

CHANNEL LOCKLINEMEN’S PLIER Size Code

9” ZA1260• High leverage rounded nose.

• Perfectly matted cutter, heattreated to hold its edge.

• Useful crushing area.

CHANNEL LOCKCUTTING PLIER Size Code

7” ZA1265• Perfectly mated cutter heat treatedto hold its edge.

• Polished high carbon drop forgedsteel.

HAND TOOLS

136

BOLT CUTTERS

BEST WAY TOOLS 4-IN-1Style Code4-in-1 94SD41

EKLIND FOLD-UP HEX KEY SETSStyle CodeEnglish ZA1215Metric ZA1216

Heavy-duty with alloy steel blades,drop forged beveled, hardened andtempered. Precisely machinedadjustment screw for keeping cuttingedges aligned. Strong tubular handleswith non-slip rubber grips.

SDR1; Two double end bits createfour screwdrivers in one handle.Alloy steel bits made in the U.S.A.#1 phillips and 3⁄16” slotted, #2phillips and 5⁄16” slotted.

LUTZ 15-IN-1 RATCHETSCREW DRIVERThe chamber allows for easy accessand storage of the bits. A slight turnof the spring loaded bit selector(knob) opens the chamber. The usercan remove or replace bits in only afew seconds.

Style Code15-in-1 94SD15

Produced from 8650 chrome nickel-alloy steel. Hex corners are sharpand clean. Precision heat treated,hardened, and tempered.

Size CodeZA1228

415-824-4300

ARROW STAPLE GUN TACKERCodeZSTAPL

T-50; Heavy-duty, all steelconstruction, high carbon hardenedsteel working parts, chrome finish,jamproof mechanism, easy arrowstaples only of .050 w.

ADHESIVE SPREADER

Stainless steel edger, long wearing,non rusting, turned up ends eliminatedigging into concrete making it easyto use. 6” long, 3” wide, 1/4” radius,3/8” lip.

415-824-4300

ARROW T-50 STAPLES

HAND TOOLS

137

Size Qty Code5⁄16” 5,000EA ZSTAP53⁄8” ZSTAP31⁄2” ZSTAP4

ARROW HAMMER TACKERCode

ZSTAPP

T-50A; Heavy-duty, all steelconstruction, high carbon, hardenedsteel working parts,chrome finish,impact-resistant, handle providesnon-slip grip.

For use in Arrow staplers T-50, T-55,HT-50A, ET-50 and ETN-50.

Size Code11”x41⁄2” x 3⁄16” V ZW8172

The best value in notched trowels.Features a comfortable “float” stylepolypropylene handle that has lots ofknuckle room and is guaranteed tonever work loose or break. The bladeis tempered steel that is lightweight,durable and perfect for spreadingadhesive.

STEEL HAND SPREADERSize Code63⁄8”x4” x 3⁄16” V ZW8171

These spreaders are made of heavygauge steel with a rigidly crimp forextra strength.

WOOD FLOATSSize Qty. Code31/2”x16” EA ZW8150

CURVED END OUTSIDECONCRETE EDGER Size Qty. Code

31/2”x16” EA ZW8170

TROWELSSize Qty. Code4”x14” EA ZW81304”x16” EA ZW8140

• Professional quality spring steel.

HAND TOOLS/TOOL POUCHES AND HOLDERS

138

HEAVY-DUTY CONSTRUCTION APRON

HEAVY-DUTY NAIL BAGCode

ZTOL50

CodeZTOL80

Genuine split leather cowhide. Twogenuine leather nail bags. Two loophammer holders. Two tool pockets and two pouches.

• Full size bags.

• 8”x71⁄2!.

• Double stitched and riveted.

With heavy-duty binding and stitchinggenuine split leather cowhide.

• One hammer holder.

• One auxiliary pocket.

• Wide belt tunnel.

• Double stitched and riveted.

POINTY TROWELSize Qty. Code23/4”x51/2” EA ZW8160

• Deluxe steel trowel.

• Polished steel blade.

• Varnished hardwood handle.

UNIVERSAL GROOVERQty. Code

EA ZW8180

Has 6”x3” blade, cuts 1/2”x1/2”groove, easy to clean.

EXTRA CAPACITYTAPE MEASURE HOLDER Code

ZTOL40Fits all models of tape rules. Rule issecured with back safety strap andsnap for easy one hand removal.Push up pocket design holds 16"–20’ tape rules. Made of top grain saddle leather.

415-824-4300

415-824-4300

TOOL POUCHES AND HOLDERS

139

HAMMER HOLDER

CodeZTOL20

SWIVEL HAMMER HOLDERCode

ZTOL10

Overall size 41⁄4”x61⁄2!, rust resistant plated all steel, double rivet reinforced, cradle loop all steel,double rivet reinforced, cradle loopdesign holds hammer in place. 23⁄4” belt slots. Made of top grainsaddle leather.

With swivel safety bracket saddleleather. Black color.

• Heavy-duty genuine leather.

• New swivel clip hammer holder.

• Nickel-plated clip and hardware.

• Safety swivel fits all hammers.

NYLON CONTROL TOOL BELTSize Codesmall D5100SM

large D5100LG

LEATHER CONTROL TOOL BELTSize Codesmall/medium D5101SM

large/extra large D5101LG

NYLON TOOL POUCHCodeD5104

TOOL POUCHES AND HOLDERS

140

NYLON NAIL POUCHCodeD5106

NYLON WORK BELTSize Codesmall D5115SM

large D5115LG

NYLON HAMMER HOLDERCodeD5124

20” NYLON TOOL BAGCodeD6100

415-824-4300

415-824-4300

CAST HANDRAIL BRACKET

HANDRAIL BRACKETS

141

SOLID BRASS HANDRAIL BRACKETS Style Code

Curve Plain Flange HD7-1Curve Screw Flange HD7-2Flat HD7-3

Style CodeFlat Aluminum HD8-3Flat Bronze HD8-4Round Gray HD8-5Round Bronze HD8-6Round Solid Brass/Bronze Finish HD8-7Round Smooth Solid Aluminum HD8-8

RAIL BRACKET HARDWARESolid brass. Style Code

2” Brass Wall Flange HD122” Brass Centerpost HD132” Brass Endcap HD14

HANDRAIL BRACKETSStyle CodeBrass HD6-1Bronze HD6-2Aluminum HD6-3White HD6-4Brass (solid) HD6-5Brass (solid, chrome plated) HD6-6Antique Brass HD6-7

IVES: Die cast plated. Polybagged with screws.

Solid cast brass handrail brackets.Polished brass finish. Projection is 3!.For 11⁄2” or 2”O.D. tubing. 3 screw holes.

Cast, sprayed finish. Projection to railcenter: 3!. Base diameter: 13⁄4!. suppliedwith lag bolt for wall and wood screwfor rail.

EDGE BANDING/SHELVING PRODUCTS

142

EDGEMATE PRE-GLUED EDGE BANDING

Style 50’ 250’Red Oak 3VTAPN 3VTAPOWhite Birch 3VTAPN 3VTAPOMaple 3VTAPN 3VTAPOWhite Melamine 3VTAPQ 3VTAPP

VIRUTEX EDGE TRIMMER

Size Code6”x9” E0069073⁄4”x111⁄4” E0071193⁄4”x131⁄2” E00913

Real wood veneer in 250’ rolls. Pre- glued. The continuous resinimpregnated backer actuallybecomes part of the edge banding to reduce splitting, tearing and checking.

This tool simultaneously trims bothedges of vinyl or other press-onedging. For panels 91⁄16” to 13⁄4” thick.

PONDEROSA PINE SHELF BRACKETS• Ready to finish.

• Each bracket individuallyshrink wrapped.

• Includes wall-mount hardware.

Size Code3”x5” E013505”x8” E015807”x10” E01710

PONDEROSA PINE KEY HOLE CORBELS• Ready to finish.

• Each Corbel assembled withready-mount keyhole plate.

• Individually shrink wrapped.

CodeZA1205

Replacement BladeZA1206

415-824-4300

415-824-4300

SHELVING PRODUCTS

143

KV 80 SLOTTED STANDARDWidth: 5/8” Height:13/32Use with the KV 180Brackets shown below

SCREWS FOR KV 80 SLOTTED STANDARDSSold in full bags only. 6 screwand anchors per bag

Color Qty Size CodeWhite EA 12” KVW8012

24” KVW802436” KVW803648” KVW804860” KVW806072” KVW8072

Zinc EA 12” KVZ801224” KVZ802436” KVZ803648” KVZ804860” KVZ806072” KVZ8072

KV 180 STEEL BRACKETSWidth: 5/8” Height:13/32Use with the KV 180Brackets shown below

Color Qty Size CodeWhite EA 6” KVW1806

8” KVW180810” KVW181012” KVW181214” KVW181416” KVW1816

Zinc EA 6” KVZ18068” KVZ180810” KVZ181012” KVZ181214” KVZ181416” KVZ181620” KVZ1820

Color Qty CodeWhite 6 per bag KVS800Zinc 6 per bag KVS801

SHELVING PRODUCTS

144

KV STEEL CLOTHES ROD HARDWARESize Style Code734C Chrome Closed End EKV734C735C Chrome Open End EKV735C

KV CLOSET TUBINGSize Code11⁄16”x8’ EKV75OI11⁄16”x10’11⁄16”x12’

Flanged End CapEKV769C

SHELF BRACKET WITH ADJUSTABLE CLOTHES POLE SUPPORT Style Code

Non-Adjustable 9CPB00

Style CodeAdjustable 9CPB01

CLOTHES POLE SOCKETSCode

5600WR

Clothes pole socketsare designed to anchorthe end of standard13⁄8” wooden clothespole. Made ofhardwood.

415-824-4300

POWER TOOLS AND ACCESSORIES

145415-824-4300

DEWALT™ DW1241⁄2” (13MM) HEAVY-DUTY JOIST & STUD DRILL

CodeB0D124

• 8.0AMP, 2 speed: 300RPM and 1200RPM.

• Reversing.

• 100% ball ans roller bearings.

• Mechanical clutch in low speed range.

• Die cast metal gear housing.

• Adjustable, 2-position side handle.

DEWALT™ DW21008 3⁄8” (10MM) HEAVY-DUTY DRILL WITH KEYLESS CHUCK• 4.0AMP, 0–2500RPM.

• Variable speed, reversing.

• 100% ball bearings.

• Heavy-duty keyless chuck.

• Built-in 2-way level.

• Contoured, textured grip handle.

CodeB0D106

DEWALT™ DW21002 3⁄8” (10MM) HEAVY-DUTY DRILLWITH KEYED CHUCK• 4.0AMP, 0–2500RPM.

• Variable speed, reversing.

• 100% ball bearings.

• Built-in 2-way level.

• Contoured, textured grip handle.

• Includes chuck key and holder.

CodeB0D100

DEWALT™ DW120K 1⁄2” (13MM) HEAVY-DUTY RIGHT ANGLE DRILL KIT

CodeB0D120

• 7.0AMP., 3 speed choices: 600RPM

straight line drilling, 400RPM or900RPM with right angle head.

• Reversing.

• 100% ball and roller bearings.

• Die cast metal gear housing.

• Includes heavy-duty carryingcase, allen wrench, side handle,chuck key and holder.


146 415-824-4300

DEWALT™ DW272HEAVY-DUTY VSR DRYWALLSCREWDRIVER WITHQUIET CLUTCH• 6.5AMP, 0–4000RPM.

• Quiet clutch provides smooth.

non-ratcheting screwing and

longer life.

• Two finger, soft grip trigger switch.

• Set and forget nosepiece.

• Belt clip.

CodeB0D272

DEWALT™ DW2361⁄2” - 7.8 AMP KEYLESS DRILL• 7.8AMP, 0-850RPM.

• Variable Speed, Reversing.

• Soft Grip Handle and Two FingerSoft Grip Trigger Switch.

• Metal Gear Housing.

• Helical Cut Steel Heat

Treated Gears.

• 360˚ Side Handle.

• Keyless Chuck with Spindle Lock.

CodeB0D236

DEWALT™ DW235G1⁄2” - 7.8 AMP DRILL• 7.8AMP, 0-850RPM.

• Three Wire Grounded Cord/Plug.

• Two Finger Soft Grip TriggerSwitch.

• Metal Gear Housing.

• Helical Cut Steel, Heat TreatedGears.

• 360˚ Side Handle.

CodeB0D235G


147415-824-4300

DEWALT™ DW276HEAVY-DUTY VSR DECK/DRYWALLSCREWDRIVER • 6.2AMP, 0–2500RPM.• Two finger, soft grip trigger

switch.• Set and forget nosepiece.• Belt clip.• High torque output for deck

building.

CodeB0D276

DEWALT™ DW292HEAVY-DUTY VSR IMPACT WRENCH• 345 ft-lbs of deliverable torque in

forward and reverse.

• 1/2" detent pin anvil.

• AC/DC forward/reverse rockingswitch.

• Soft grip handle for superiorergonomics.

• Ball bearing construction forincreased durability

CodeB0D292

DEWALT™ DW304PK 9.0AMP HEAVY-DUTY RECIPROCATING SAW KIT• 4-position blade clamp allows for

flush cutting and increasedversatility

• Powerful 10.0 Amp motordesigned for heavy-dutyapplications

• Lever-action keyless blade clampfor quick and easy bladechanging

• 0-2,800 strokes per minute and1-1/8" stroke length deliver fastcutting

• Variable speed trigger providesimproved control

CodeB0D304

DEWALT™ DW317KHEAVY-DUTY TOPHANDLE JIG SAW KIT

CodeB0D317

• Keyless blade clamp for fast, easyblade installation and removal.

• 5.5A motor deliver powerful cuts inthe hardest materials.

• Variable speed delivers 0 - 3,100strokes per minute for optimalcutting speed.

• 4-position orbital action allows forfaster, more aggressive cuts in avariety of materials.

• All metal gear case providessuperior durability on a professionalsite.

• Shoe bevels 0 to 45 degrees forbeveled cuts

IInncclluuddeess• 2 cobalt steel blades.• heavy-duty kit box.

CodeB0D311


148 415-824-4300

DEWALT™ DW378GHEAVY-DUTY 7-1/4" HIGH TORQUE FRAMING SAW

CodeBOD378

• Powerful 15.0AMP Motor.• Lightweight At 13.0 lbs.• High Strength Die Cast Shoe.• High Torque Bevel Gear Drive.• Built-In "Saw Hook."• 50˚ Bevel Capacity.• Carbide Saw Blade Included.

• Variable speed control dialmatches the correct speed forthe application for increasedversatility and control

DEWALT™ DW311KHEAVY-DUTY RECIPROCATING SAW KIT• 13 Amp motor delivers increased

power for heavy-dutyapplications

• Orbital action delivers fastcutting for wood applications

• 0-2,700 SPM and 1-1/8" strokelength for fast and efficientcutting

• Keyless stainless steel bladeclamp for quick and easy bladechanges and increased reliability

• Keyless adjustable shoe easilyadjusts depth of cut and extendsblade life

• Anti-slip comfort grip handle forincreased comfort

• 9.0 AMP AC/DC 11,000 RPM motorprovides high-power in all 41/2”griding applications.

• Keyless adjustable guard can beadjusted without the use of tools.

• Rubber grip side handle providesincreased comfort and reduceduser felt vibration.

• Automatic turn-off brushes shutdown the tool when brushes needto be changed to avoid tooldamage.

• Dust sealed sliding switch provideslong life in high dust ingestion.

• Matched wheel flanges allow foruse of common accessories.

IInncclluuddeess

• Grinding wheel• Wrench• Matched flanges• Keyless adjustable guard• 2 position rubber grip side handle


149415-824-4300

DEWALT™ DW36471⁄4” (184MM) HEAVY-DUTY CIRCULAR SAW WITH ELECTRIC BRAKE & REAR PIVOT DEPTH OF CUT ADJUSTMENT

CodeB0D364

• 15.0AMP, AC/DC, 5800RPM.• High strength, aluminum alloy

shoe.• 2 second electric break.• Rear pivot depth of cut

adjustment.• 100% ball and roller bearings,

helical gears.• 50º bevel capacity.• 20.0AMP AC/DC switch.• Includes carbide blade and angled

blade wrench.

DEWALT™ DW821 HEAVY-DUTY 41⁄2! (115MM)SMALL ANGLE GRINDER

CodeB0D821

• Dust sealed switch for increaseddurablility.

• Dual Plane counter-balanced low-vibration design reduces fatigue.

• 2.0AMP motor moves at 13,500OPM,providing a superior finish.

• Sealed 100% ball-bearingconstruction provides longer life.

IInncclluuddeess

• Kit box.• Dust bag.• Sandpaper punch.

DEWALT™ DW420 5” HEAVY-DUTYRANDOM ORBIT PALM SANDER Code

B0D420

DEWALT™ DW421 HEAVY-DUTY 5”RANDOM ORBIT SANDER Code

B0D421

DEWALT™ DW411K HEAVY-DUTY 1⁄4 SHEET PALM GRIP SANDER KIT

CodeB0D411

• Provides maximum sanding speedfor smooth finishes.

• Controlled Finishing System®maintains pad speed and minimizesgouging during start up.

• Dual-plane counter-balanced fanreduces user fatigue.

• Dust-sealed switch preventscontamination

• Sealed 100% ball-bearingconstruction.

• Accepts 5”, 8-hole hook and loop™paper.

• Shop vacuum adapter for minimumdust collection.

IInncclluuddeess

• Dust bag.• Vacuum adapter.

• 2.0AMP.• 12,000OPM.• Accepts 5” 8-hold pressure

sensative adhesive paper.• Controlled Finishing System™

keeps pad a controlled speed.• 100% ball bearing construction.• No dust.• Dual-plane counter-balanced fan.• Dust sealed switch.


150 415-824-4300

• 2.3 ft-lbs. of impact energy, providefast drilling and powerful chipping.

• 7.5AMP motor provides highperformance and overloadprotection.

• Reverse feature assists in theremoval of fasteners.

• Variable speed allows for precisehole placement on work surface.

• Factory set clutch reduces sudden,high torque reactions if bit jams.

• 360° side handle adjusts easily forpreference or use in tight spaces.

• Chipping (hammer only) modeallows user to perform lightchipping applications such asremoval of mortar splatter.

• "Rotation only mode" allows tool tobe used for wood and metal drilling(using SDS-to-round shankadaptor).

AAppppll iiccaatt iioonnss• Optimum range in concrete: 5/32”-5/8”.• Drilling capacities over a broad

range of mechanical and epoxyanchoring applications.

• 11AMP motor delivers high outputand overload protection.

• Electronic variable speed allows theuser to control the speed of drillingand chipping.

• 7.3 ft./lbs. of impact energy deliversup to 42 percent faster drilling andchipping applications than thecompetition.

• Spline tool holder is compatiblewith all spline bits.

• Rubber grip helps reduce the levelof vibration felt by the user whenoperating the tool.

• Rear handle mount means lessbending over when using tool indown drilling applications.

• Factory clutch helps reduce thetool's reaction to embedded steelwhen bits "lock up" while inoperation, preventing injury.

• Modular construction allowsservice technicians to repair toolsquickly, resulting in less downtime.

• 360° side handle allows user theability to position the side handlewherever it best suits theapplication.

IInncclluuddeess• 360° side handle.• Depth rod.• Heavy-duty kit box.

• Powerful 8AMP motor aggressivelyremoves material in a variety ofapplications.

• All-metal housing increasesdurability during a drop.

• Three wheel design delivers lowestcenter of gravity and longest 3"x21"platen available.

• Innovative dust collection system is20% more efficient thanconventional dust bags.

• Dust collection shut-off valveeliminates dust stream towardusers when collector is not in use.

• Top exit cord allows for easy use ofoverhead recipticles.

• Rubber grips reduce vibration. AAppppll iiccaatt iioonnss• Aggressive sanding of flat surfaces.• Paint removal from flat surfaces.• Scribbing countertops.IInncclluuddeess• Belt sander.• Sanding belt.


151415-824-4300

DEWALT™ DW433 HEAVY-DUTY 3”x21”VS BELT SANDER

CodeB0D433

DEWALT™ DW25550HEAVY-DUTY 19/16” SPLINEROTARY HAMMER KIT

CodeB0D25550

DEWALT™ D25203KHEAVY-DUTY 1” 3 MODED-HANDLE SDS HAMMER

CodeB0D25203

• 13/4 HP (maximum motor HP),11AMP motor provides the powerto rout smoothly through thetoughest hardwoods.

• Micro-fine depth adjustment ringprovides precise depth adjustments in 1/64" increments and adjustsvertically for a constantswitch/cordset location.

• Adjustable, tool-free steel motorcam lock makes depth adjustmentand base changes quick and solid-locking.

• Quick release motor latches forfast and easy motor pack removalfor bit and base changes.

• Detachable cordset offers cordsetserviceability and the ability touse the same motor pack for allbases.

• Sub-base concentricity gaugeincluded to ensure bitconcentricity for best-in-classaccuracy.

• Clear, LEXAN sub-base providesenhanced base durability, bitvisibility, and accepts standardtemplate guide bushings.

• Rubber overmolded handles andlow center of gravity designprovide best-in-class comfort,balance, and control.

• Heavy duty, precision machined,die-cast aluminum base andmotor housing for durability andlow tool weight.

• Nickel plated motor housing for asmooth, long-lasting depthadjustment.

• Right or left switch and cordsetlocation provides the ability tohave the switch in your right orleft hand.

• Flat top for easy bit and depthchanges.

• Self-releasing, long, eight slottedcollets for better bit retention andeliminates frozen bits.

IInncclluuddeess• DW616M motor pack.• DW6184 fixed base.• 1/4" and 1/2" collets.• Sub-base concentricity gauge.• 2 wrenches.

DEWALT™ DW6253HP HEAVY-DUTY VS ELECTRONIC PLUNGE ROUTER

CodeB0D625

• 15.0AMP.• 8,000–22,000RPM.• Variable speed with electronic

feedback circuitry maintainsconstant speed under load andprovides soft start.

• 100% ball bearings.• 1⁄4!–1⁄2” collet capacity.• Micro fine depth adjustor.• Spindle lock button.• Includes 1⁄4” and 1⁄2” collets,

template guide bushing adapterand 2 wrenches.


152 415-824-4300

DEWALT™ DW61613⁄4 HP (MAXIMUM MOTOR HP)FIXED BASE ROUTER

CodeB0D616

DEWALT™ DW618PK21/4HP (MAXIMUM MOTOR HP)EVS FIXED BASEPLUNGE ROUTER COMBOKIT WITH SOFT START


153415-824-4300

CodeB0D618

• 21/4 HP (maximum motor HP),12.0AMP electronic variable speedmotor provides the power to routsmoothly through the toughesthardwoods.

• Electronic variable speed with fullfeedback control for constant speedunder load from 8,000-24,000RPMand soft start to reduce start-uptorque for enhanced control.

• Micro-fine depth adjustment ringprovides precise depth adjustmentsin 1/64" increments and adjustsvertically for a constantswitch/cordset location.

• Adjustable, tool-free steel motorcam lock makes depth adjustmentand base changes quick and solid-locking.

• Integral, through-the-column dustcollection collects 95% of the dustand provides superior bit visibility.

• Quick release motor latches for fastand easy motor pack removal forbit and base changes.

• Detachable cordset offers cordsetserviceability and the ability to usethe same motor pack for all bases.

• Sub-base concentricity gaugeincluded to ensure bit concentricityfor best-in-class accuracy.

• Precision machined brass bushingsand case-hardened steel guide rodsprovide a smooth and accurateplunge stroke.

• Spindle lock to allow for onewrench bit changes.

• Clear, LEXAN sub-base providesenhanced base durability, bitvisibility, and accepts standardtemplate guide bushings.

• Rubber overmolded handles andlow center of gravity design providebest-in-class comfort, balance, andcontrol.

• Dust-sealed switch providesdurability and long switch life.

• Heavy duty, precision machined,die-cast aluminum base and motorhousing for durability and low toolweight.

• Nickel plated motor housing for asmooth,long-lasting depthadjustment.

• Right or left switch and cordsetlocation provides the ability to havethe switch in your right or left hand.

• Flat top for easy bit and depthchanges.

• Self-releasing, long, eight slottedcollets for better bit retention andeliminates frozen bits.

• Five position, adjustable turret stopassists in stepped or repeatedplunge cuts.

• Micro-fine depth adjustment onplunge base 5/128" per turn forprecise routing in veneer andinlays.

• Easy to reach plunge lever andswitch for superior control whilerouting.

IInncclluuddeess• DW618M motor pack.• DW6184 fixed base.• DW6182 plunge base.• 1/4" and 1/2" collets.• Wrench.• Sub-base concentricity gauge.• Large hole sub-base.• Vacuum adaptor.• Heavy-duty kit box.


154 415-824-4300

DEWALT™ DW660HEAVY-DUTY CUT-OUT TOOL Code

B0D660Features:• Tool-free bit change for fast and

easy bit changing.• Turn-on/bump-off switch allows

users to shut tool off by bumpingagainst body.

• 5.0AMP, 30,000RPM motor providesmore cutting power.

• Slim body design for less fatigueover prolonged use.

• Dust-sealed switch providesdurability and long switch life.

• Jampot construction gives the tooljobsite durability.

Specifications• 5AMP

• No Load Speed• Collet Diameter• Adjustable Guide• Spindle lock• Tool Length• Tool Weight• Shipping Weight

Includes• 1 general purpose bit.• 1 drywall cutting bit.• 1⁄4!, 1⁄8” collets.

CodeB0D680

DEWALT™ DW680K HEAVY-DUTY 31/4”PLANER KIT WITH 3/32” (2.5MM) DEPTH OF CUT

• Heavy-Duty 7.0AMP motor providesa smooth, even finish in the hardestof woods.

• 3/32” (2.5mm) maximum cut in onepass reduces the amount of passeson your material.

• Accepts large resharpenable highspeed steel blades for straight orframing applications.

• Calibrated Depth Adjustment Knobfor accurate depth settings andeliminating the need to re-zero yourdepth.

• Also accepts reversible carbideblades for more detailed, accuratewoodworking.

• Precision-machined shoe bottomand side provides flat surface finishas well as accurate and squarerabbet joints.

• Three precision machined groovesin front shoe provide three differentsizes for edge chamfering.

• Ergonomically designed two fingertrigger for increased comfort andless user fatigue.

• 15,000RPM for a smooth, high-quality cut.

IInncclluuddeess• Two reversable carbide blades.• Rabbeting fence.• Heavy-duty kit box.


155415-824-4300

CodeB0D682

• 6.5AMP.• 10,000RPM.• Integral fence with rack and pinion

height adjustment tilts 0–90º.• Fence allows location on either face

of a miter joint.• Preset depth stops for #0, #10 and #20

biscuits and 20MM depth of cut.• Retractable steel anti-slip pins.• Includes 6 tooth carbide blade, dust

bag, dust reflector, vacuum adapter,torque key, wrench and heavy-dutycarrying case.

DEWALT™ DW682KHEAVY-DUTY PLATE JOINER KIT

CodeB0D705S

• 13.0AMP, 4000RPM.• Electric brake.• 100% ball bearings.• Stainless steel miter scale with 9

positive stops.• Precision miters 0–48º, right and left.• 0–48º bevel capacity.• Automatically retracting lower guard.• Includes carbide blade and blade wrench.• Capacity:65⁄8” crown moulding.• 77⁄8” base moulding.• 2x8 @ 45º bevel.• 2x6 @ 45º miter.• 4x6 @ 90º miter.• 4x4 @ 45º miter.

DEWALT™ DW705S12” (305MM) HEAVY-DUTY COMPOUND MITER SAW

CodeB0D708

• 13.0AMP, 4000RPM.• Electric brake.• 0–48º bevel capacity to the left

and right.• 12” crosscut capacity at 90º.• Precision miters 0–50º left and

0–60º right.• Stainless steel detent plate with

11 positive stops.• Includes carbide blade and

blade wrench.• Capacity:

51⁄4” Crown moulding vertically.51⁄4” Base moulding vertically.41⁄2”x12 @ 90º miter.4x8 @ 45º miter.

DEWALT™ DW708 12” HEAVY-DUTY DOUBLE BEVEL SIDINGCOMPOUND MITER SAW

• Powerful 15MP, 10,000RPM motorhandles larger cuts in widermaterials with ease.

• Three knife cutter-head delivers30% longer knife life and makesknife change faster and easier.

• Two speed gear box allows usersto change feed speed tooptimizing cuts per inch at 96 or179CPI.

• Fan-assisted chip ejectionvacuums chips off of the cutter-head and exhausts them out ofthe machine.

• 193/4" cast aluminum base is 2Xmore rigid than a standard 10"base and folding tables.

• Automatic carriage lock reducesthe movement that causes snipewithout the need for manualengagement by the user.

• Material removal gauge and extra-large thickness scale deliveraccurate cuts with every pass.

• Extra-large turret depth stopallows users to return to mostfrequently used thicknesses withease.

IInncclluuddeess• Dust hose apapter.• Dust ejection shoot.

CodeB0D735

DEWALT™ DW735 HEAVY-DUTY 13” THREE KNIFE,2 SPEED THICKNESS PLANER

DEWALT™ DW744SHEAVY-DUTY 10" PORTABLETABLE SAW WITH STAND

• Exclusive, telescoping facedelivers 241/2” rip capacity withoutsacrificing portability.

• Rack and pinion design makesfence adjustments fast, smoothand accurate ensuring the fence isalways parallel to the blade.

• Telescoping rails retract within thesaw top for easy portability.

• Features a heavy-duty internalmotor mechanism which stabilizesthe arbor, keeping vibration to aminimum.

• Dust collection Port easilyconnects to a vacuum for forefficientdust extraction.

• 31/8” X 191/4” table surfaceprovides superior material support.

AAppppll iiccaatt iioonnss

• Cabnet Installers: ripping fillerboards.

• Hardwood Floor Installers: rippingfloor boards.

• Trim Carpenters: ripping moldings,wainscotting, ripping and cross-cutting, 1x material for framing ofbook shelves and entertainmentcenters, ripping framing lumber.

• Deck Builders: ripping deckboards, rail cap, railings.

• Remodelers: ripping frming lumber,sheet material (4’x8’), framinglumber, 2”x12”, sizing materials upto 3” thick, ripping and crosscuttiing 1x material, used fordados, rabbets, mortise and tenos.

IInncclluuddeess

• 10” 24-Tooth SERIES 20™carbide blade.

• Portable table sawstand (DW7440).

• Miter gauge.

CodeB0D744


156 415-824-4300

• 1 hour charger for 7.2V to 18VDewalt NiCd battery packs (exceptUnivolt® batteries)

• Runs off of 7.2V to 18V Dewalt NiCdmaking it a cordless radio.

• Digital Tuner with LCD display, built-in clock and 8 station memorypresents.

• High efficency weather resistantspeakers with dual bass portsmaximum bass range.

• Dual pivoting 11” flexible antennaprovides more durability and betterreception.

• Heavy-Duty AM/FM radio withauxilary port allows users to listen tothe radio, CD or MP3 player (whenplugged into the auxilary port).

• Weather sealed charger door openseasily for fast battery changes.

• The Dewalt 3-stage chargingsystem provides maximum run-timeand extends overall life of thebattery.

• Heavy-Duty storage case allowsstorage for CD player, MP3 playeror CDs.

DEWALT™ DWDC011HEAVY-DUTYWORKSITE RADIO CHARGER


157415-824-4300

CodeB0D011

DEWALT™ DW920K-2HEAVY-DUTY 1/4” (6MM)7.2V CORDLESS TWO-POSITIONSCREWDRIVER KIT

• 80 in-lbs of maximum torque outputprovides for a superior power toweight ratio in a variety of fastening applications.

• Adjustable two-position handleallows for operation as both in-lineand pistol-grip.

• Variable speed and reversing triggerswitch provides 0-500RPM forfastening and pre-drilling into wood,plastics and light gauge metal.

• Industrial quick-release hex-shankchuck allows for quick screwdriverbit change and prevents bit “runout”.

• Electric brake provides increasedproductivity.

• 7.2V battery pack allows for longer run-time and charges inone hour.

• Heavy duty metal hinge providessecure and sustained two-position lock.

AAppppll iiccaatt iioonnss

• #10 x 2” Wood Screw into 2” x 4”SPF - 98 screws per charge.

• #8-3” Drywall Screw into 2” x 4”SPF - 78 screws per charge.

• #8 x 21/2” Wood Screw into pre-drilled 9/64” diameter hole in a 2”thick oak - 47 screws per charge.

• Tapered #6 x 3/4” wood srew intooak - 156 screws.

• Ideal tool for any professional enduser looking for a durable andpowerful srewdriver.

IInncclluuddeess

• 1 hour charger.• (2) 7.2V compact batteries.• 2 screwdriver bits.• heavy-duty kit box.

CodeB0D920

DEWALT™ DWDC385HEAVY-DUTY 18V CORDLESSRECIPROCATING SAW KIT

• 1” stroke length and 2,900SPM forfast cutting.

• Keyless blade clamp allows quickblade change without touchingbladeor reciprocating shaft.

• Electric blade minimizes risk ofblade breaking when exitingplunge cuts.

• Compact and lightwieght; 7.1 lbs.• Pivoting shoe with open top for

maximum visibility.

• Blade can be reversed for flushand plunge cutting.

• Variable speed with trigger lock forincreased blade control.

IInncclluuddeess

• 1 hour charger.• 18V XR+™ pack battery.• Reciprocation saw blade.• Heavy-duty kit box.

DEWALT™ DWDC39018V CORDLESS CIRCULAR SAW• 3,700RPM for Fast Cutting.

• Blade Located on Left Side for BetterVisibility.

• 6-1/2” 24 Tooth Carbide Blade allowsUser to Cut 2x Material at 45˚ BevelAngle.

• Fan Cooled Motor with ReplaceableBrushes.

• 50˚ Bevel.

• Rip Fence Included for IncreasedRipping Accuracy.

• Includes: 1 Hr Charger with Tune-Up™Mode, 1 XR+™ PACK Extended Run-Time Batteries and Kit Box.


158 415-824-4300

CodeB0D385

• High performance fan cooled motor.• Replaceable brushes for longer

motor life.• Cuts 2X materials in a single pass.• Left side blade for maximum visibility.• Bevels 50º.• Spindle lock for easy blade change.• Includes: 1 hour charger, 53⁄8” 16

tooth carbide blade, XR PACK®

extended run-time battery, andheavy-duty carrying case.

DEWALT™ DW935K14.4V HEAVY-DUTY 53⁄8” (136MM) CORDLESS SAW KIT

CodeB0D935

CodeB0D939

DEWALT™ DW052K-2HEAVY-DUTY 12VCORDLESS IMPACT DRIVER KIT

DEWALT™ DWDC980HEAVY-DUTY XRP™ 1/2”(13MM) 12V CORDLESSDRILL / DRIVER KIT• Dewalt built high torque motor

delivers 400 in.-lbs. of maximumtorque.

• XRP™ extended run-time batteriesprovide long run-time and battery life.

• Exclusive 3-Speed transmissionfeatures a max 3rd speed at 1,800RPM.

• 1/2” Metal ratcheting chuck withcarbide jaws prevents bits fromslipping.

• Superior ergonomics provides optimalbalance, control and comfort.

IInncclluuddeess• 1 hour charger.• (2) 12V XRP™ batteries.• Double-ended screwdriver bit.• Heavy-duty kit box.

• Compact size and weight allowsaccess into tighter areas andreduces user fatigue.

• 1000 in-lbs or max torque to performa wide range of fasteningapplications.

• 0-2,400RPM/0-3,000BPM for fasterapplication speed.

• Textured anti-slip comfort gripprovides maximum comfort.

• Durable magnesium gear case andall metal transmission for extendeddurability.

• Heavy-duty impacting mechanismdirects torque to fastener withoutkickback.

AApppplliiccaattiioonnss

• Driving and removing fastenersin wood.

• Fastening and removing nutsand bolts.

• Drilling holes in wood and metal.IInncclluuddeess

• 1 hour charger.• (2) 12V XR Pack® batteries.• Heavy-duty kit box.

DEWALT™ DW965K-2HEAVY-DUTY 3/8” (10MM)12V CORDLESS RIGHTANGLE DRILL / DRIVER KIT• 2 speed ranges: 0-400/0-1200RPM

allowing the user to get intotighter spaces while still havingaccess to the trigger.

• 180 in-lbs. of maximum torque forincreased applications such asturning large bits and fasteners.

• Multi-grip trigger provides comfortand convenience allowing the userto get into tight spaces.

• Variable speed and reversing givethe user the ability to controlspeed for greater accuracy, and

the convenience of reverse.• Durable, right angle transmission

with sealed ball bearing provides alonger tool life.

IInncclluuddeess

• 1 hour charger.• (2) 12V compact batteries.• Heavy-duty kit box.


159

CodeBOD965

415-824-4300

CodeB0D052

CodeB0D980

• Dewalt built high torque motordelivers 450 in-lbs ofmaximum torque.

• XRP™ extended run-time batteriesprovide long run-time andbattery life.

• Exclusive 3-Speed transmissionfeatures a max 3rd speedat 1,800RPM.

• 1/2” Metal ratcheting chuck withcarbide jaws prevents bitsfrom slipping.

• Superior ergonomics providesoptimal balance, control andcomfort.

IInncclluuddeess• 1 hour charger.• (2) 14.4V XRP™ batteries.• Double-ended screwdriver bit.• Heavy-duty kit box.

DEWALT™ DWDC983HEAVY-DUTY XRP™ 1/2”(13MM)14.4V CORDLESSDRILL / DRIVER KIT

• Dewalt built high torque motordelivers 500 in-lbs ofmaximum torque.

• XRP™ extended run-time batteriesprovide long run-time andbattery life.

• Exclusive 3-Speed transmissionfeatures a max 3rd speedat 2,000RPM.

• 1/2” Metal ratcheting chuck withcarbide jaws prevents bitsfrom slipping.

IInncclluuddeess

• Includes 1 hour charger.• XR2 PACK™ battery.• 360° side handle.• Heavy-duty kit box.

415-824-4300

DEWALT™ DWDC987HEAVY-DUTY XRP™ 1/2”(13MM)18V CORDLESS DRILL / DRIVER KIT

CodeB0D987

CodeB0D983

160



161415-824-4300

DEWALT™ CORDLESS BATTERYVolts Code12 DW907114 DW909118 DW9096

JOINER PLATE BISCUITSComes in three convenient sizes forany woodworking project.

Size Qty Code#0 75 DW6800#10 DW6810#20 DW6820

AIR IMPACT SOCKET SET• 12 piece set.• Deep 1⁄2” drive.• Heat treated.• Forged steel.• 1 socket clip.• Contains:

3⁄8!, 7⁄16!, 1⁄2!, 9⁄16!, 5⁄8!, 11⁄16!, 3⁄4!, 13⁄16!, 7⁄8!, 15⁄16!, and 1” sockets.

CodeDW9099

HEAVY-DUTY SPADE BITDia 4” 61⁄8” 61⁄4” 16”1⁄4” B172005⁄16” B172013⁄8” B17202 B167067⁄16” B172031⁄2” B16908 B17204 B167089⁄16” B172055⁄8” B16910 B17206 B167103⁄4” B16912 B17208 B167127⁄8” B16914 B17210 B167141” B16916 B17212 B1671611⁄8” B1721311⁄4” B16920 B1721413⁄8” B1721511⁄2” B16924 B17216

Precision ground point and cuttingedges are re-sharpenable for long life.Milled flats on shank prevent slippingin drill chuck. Drill clean, fast holes inwood, plastic, plywood, and more.Shank diameter on all bits is 1⁄4”except the 1⁄4” bit which is 3⁄16!.

Extensions Quick Change Code6” B1721812” B17219


162 415-824-4300

DEWALT™ DW1969 INDUSTRIAL DRILL BIT SET Code

DW196929 piece black oxide set contains:1⁄16!, 5⁄64!, 3⁄32!, 7⁄64!, 1⁄8!, 9⁄64!, 5⁄32!,11⁄64!, 3⁄16!, 13⁄64!, 7⁄32!, 15⁄64!, 1⁄4!, 17⁄64!,9⁄32!, 19⁄64!, 5⁄16!, 21⁄64!, 11⁄32!, 23⁄64!, 3⁄8!,25⁄64!, 13⁄32!, 27⁄64!, 7⁄16!, 29⁄64!, 15⁄32!,31⁄64!, 1⁄2!.

DEWALT™ DW1956

CodeDW1956

16 piece drill bit set contains:1⁄16!, 5⁄64!, 3⁄32!, 7⁄64!, 1⁄8!, 9⁄64!, 5⁄32!,11⁄64!, 3⁄16!, 13⁄64!, 7⁄32!, 15⁄64!, 1⁄4!, 5⁄16!,3⁄8!, 1⁄2!.

INDUSTRIAL DRILL BITS Dia Dia Drilling Overall(In) (Dec) Depth Length Code1⁄16” .0625 .88 1.88 DW17045⁄64” .0781 1.00 2.00 DW17053⁄32” .0938 1.25 2.25 DW17067⁄64” .1094 1.50 2.62 DW17071⁄8” .1250 1.62 2.75 DW17089⁄64” .1406 1.75 2.88 DW17095⁄32” .1562 2.00 3.12 DW171011⁄64” .1719 2.12 3.25 DW17113⁄16” .1875 2.31 3.50 DW171213⁄64” .2031 2.44 3.62 DW17137⁄32” .2188 2.50 3.75 DW171415⁄64” .2344 2.62 3.88 DW17151⁄4” .2500 2.75 4.00 DW171617⁄64” .2656 2.88 4.12 DW17179⁄32” .2812 2.94 4.25 DW171819⁄64” .2969 3.06 4.38 DW17195⁄16” .3125 3.19 4.50 DW172021⁄64” .3281 3.31 4.62 DW172111⁄32” .3438 3.44 4.75 DW172223⁄64” .3594 3.50 4.88 DW17233⁄8” .3750 3.62 5.00 DW172425⁄64” .3906 3.75 5.12 DW172513⁄32” .4062 3.88 5.25 DW172627⁄64” .4219 3.94 5.38 DW17277⁄16” .4375 4.06 5.50 DW172829⁄64” .4531 4.19 5.62 DW172915⁄32” .4688 4.31 5.75 DW173031⁄64” .4844 4.38 5.88 DW17311⁄2” .5000 4.50 6.00 DW1732

• Black oxide coated for greaterresistance to wear.

• Industrial M7 grade steel.

• Ideal for drilling in metal, wood, plastic.


163415-824-4300

BI-METAL DEEP CUT HOLE SAWSSize Code Size Code5⁄8” DI80010 21⁄8” DI800343⁄4” DI80012 21⁄4” DI800367⁄8” DI80014 23⁄8” DI800381” DI80016 21⁄2” DI8004011⁄8” DI80018 23⁄4” DI8004411⁄4” DI80020 3” DI8004813⁄8” DI80022 31⁄2” DI8005611⁄2” DI80024 35⁄8” DI8005815⁄8” DI80026 4” DI8006413⁄4” DI80028 41⁄8” DI800662” DI80032 41⁄4” DI80068

41⁄2” DI80072

HOLE SAW MANDRELSShank Size Chuck Cap Size Code1⁄4” Round 9⁄16!–13⁄16” DW18007⁄16” Hex 11⁄4!–23⁄8” DW18027⁄16” Hex 21⁄2!–5” DW18031⁄4”x4” Pilot Drill DW1808

INDUSTRIAL ROUND SHANK PERCUSSION BITS• High percussion bits for masonry

applications.

• Ideal for percussion or rotarydrilling applications in rotary drillsand hammer drills.

Industrial, rugged hole sawsdesigned for heavy cutting instandard or deep cut applications.

• Extra hard, variable pitch, highspeed steel teeth stay sharper andcut faster.

• Rugged alloy steel body for long life.

• Thicker backing plate for durabilitythat alleviates need for torquedriving plate.

• Ideal for cutting holes in steel,stainless steel, brass, bronze,copper, aluminum, wood, plasticand other compositions.

Size Code1⁄8”x3” DW52213⁄16”x3” DW52223⁄16”x6” DW52231⁄4”x6” DW52251⁄4”x12” DW52265⁄16”x6” DW52285⁄16”x12” DW52293⁄8”x6” DW52303⁄8”x12” DW52311⁄2”x6” DW52351⁄2”x12” DW52365⁄8”x6” DW52415⁄8”x12” DW52423⁄4”x6” DW52443⁄4”x12” DW52451”x12” DW5249

DEWALT™

DRILL AND DRIVE SYSTEM SET CodeDW2730Contains:

1 - Magnetic drill and drive system shaft.

1 - Driver.

1 - #6 Drill/counter sink insert.



1 - #1 Phillips bit tip.

1 - #2 Phillips bit tip.


164 415-824-4300

HEAVY-DUTY AUGER BITSize Length Code3⁄8” 61⁄2” B172201⁄2” B172229⁄16” B172245⁄8” B1722611⁄16” B172283⁄4” B1723013⁄16” B172327⁄8” B1723415⁄16” B172351” B1723611⁄8” B1723811⁄4” B1724013⁄8” B1724211⁄2” B17244

POWER SHIP AUGER BITSSize Length Code1/2” 17” B173769⁄16” B173775⁄8” B1737811⁄16” B173793⁄4” B1738013⁄16” B173817⁄8” B173821” B1738411⁄16” B17385

Use where foreign material may beencountered. For boring work in largetimber, telephone poles, docks andbridges, and in mining and construction.Single twist type with single cutterand side lip. Has hollow center twistmedium-fast screw pitch. Heat treatedfull length, cutting head can besharpened. 17” overall length, 12”twist, 5” hex shank.

4” twist with a 61⁄2” overall length.7⁄16” hex shanks for sure chuck grip.Precision made of special bit steel,heat treated and tempered for longlife. Feed screw pilot draws bit intowood. Cutting spurs and lips staysharper longer.

Rapid Load® Holder(1) - Compact Magnetic Drive Guide(1) - 1/8” Hex Shank Drill Bit(1) - 1/4” Hex Shank Drill Bit(1) - #2 Phillips 2” Power Bit(1) - #2 Square Recess 2” Power Bit(1) - #1 Phillips 1” Insert Bit Tip(4) - #2 Phillips 1” Insert Bit Tips(1) - #1 Square Recess 1” Bit Tips(2) - #2 Square Recess 1” Bit Tips (1) - #8 Slotted 1” Insert Bit Tip (1) - #8 Slotted 1” Insert Bit Tip

Rapid Load® Holder(1) - Compact Magnetic Drive Guide(1) - 1/4” x 17/8” Magnetic Nutdriver(1) - 5/16” x 17/8” Magnetic Nutdriver(1) - 1/4” Socket Adapter(1) - 3/8” Socket Adapter(1) - 1/16” Hex Shank Drill Bit(1) - 3/32” Hex Shank Drill Bit(2) - 1/8” Hex Shank Drill Bits(1) - 5/32” Hex Shank Drill Bit(1) - 3/16” Hex Shank Drill Bit(1) - #1 Phillips 2” Power Bit(1) - #2 Phillips 2” Power Bit(1) - #2 Square Recess 2” Power Bit(1) - #8 Slotted 2” Power Bit(1) - #10 Slotted 2” Power Bit(1) - #1 Phillips 1” Insert Bit Tip

(9) - #2 Phillips 1” Insert Bit Tip

(1) - #1 Square Recess 1” Bit Tip(1) - #2 Square Recess 1” Bit Tip(1) - #8 Slotted 1” Insert Bit Tip

415-824-4300


165

DEWALT™

RAPID LOAD HOLDER CodeDW2505• Pressure activated ball-groove

system for rapid loading andstrong retention.

• Impact and rust resistant nickelplated nose.

• Stainless steel interior parts.• Impact resistant polymer

exterior.

DEWALT™ 251315PC RAPID LOAD Code

DW2513

DEWALT™ 2518RAPID LOAD Code

DW2518


166

DEWALT™

RAPID LOAD HEXSHANK BITS Size Qty. Code6pc set EA DW25511/16” EA DW25523/32” EA DW25531/8” EA DW25545/32” EA DW25553/16” EA DW25561/4” EA DW2557

• Split point tip prevents walking.

• Black oxide coating provides longer life.

DEWALT™

RAPID LOAD MASONRY BIT Size Qty. Code3pc set EA DW25715/32” EA DW25723/16” EA DW25731/4” EA DW2574

• For drilling in brick, block, concrete.

• Carbide tip aggresively penetratessurfaces.

DEWALT™

RAPID LOAD COUNTERSINK SET Size Qty. Code3pc set (6,8,10) EA DW2535#6 EA DW2567#8 EA DW2568#10 EA DW2569#12 EA DW2570

Replacement Drill Bits9/64” for #6 EA DW253711/64” for #8 EA DW25383/16” for #10 EA DW25397/32” for #12 EA DW2540

• Drill countersink andcounterbore in one step.

• Four cutter countersink andtapered drill bit providesuperior speed and finish.

415-824-4300

415-824-4300


167

DEWALT™

RAPID LOAD SOCKET ADAPTER Size Qty. Code1/4” EA DW25413/8” EA DW2542

• Hardened steel for maximumdurability.

• Adapts sockets for use in drills.

DEWALT™

RAPID LOAD MAGNETIC NUTDRIVER Size Qty. Code1/4” EA DW22185/16” EA DW22193/8” EA DW2220

• Hardened steel for maximumdurability.

• Powerful magnet for strongretention.

DEWALT™

RAPID LOAD 6” MAGNETIC DRIVE GUIDE

Size Qty. Code6” EA DW2055

• Holds screw in correct positionwithout wobbling or slipping.

DEWALT™

RAPID LOAD COMPACT DRIVE GUIDE

Qty. CodeEA DW2054

• Holds screw in correct positionwithout wobbling or slipping.


168

BELL HANGER BITSize Code5⁄16”x18” B133223⁄8”x18” B133231⁄2”x18” B133259⁄16”x18” B133265⁄8”x18” B133273⁄4”x18” B13328

• A hole in the flute makes it easy to pull wires through walls, ceilings, and floors.

• For installing telephones, cable TV, computers, security systems.

F0STNER WOOD BORING BITSSize Code1⁄4” B429043⁄8” B429061⁄2” B429085⁄8” B429103⁄4” B429127⁄8” B429141” B4291611⁄4” B4292013⁄8” B4292211⁄2” B4292415⁄8” B4292613⁄4” B4292817⁄8” B429302” B4293221⁄8” B42934

• Ideal for drilling large holes in wood, thin stock and veneer.

• Precesion ground for clean holes without chipping or splintering.

BRAD POINT DRILL BIT

• Self center starter point for accurate, precision drilling.

• Negative grind cutting edges for quicker chip expulsion.

Size Code1⁄8” DW17403⁄16” DW17411⁄4” DW17425⁄16” DW17433⁄8” DW17447⁄16” DW17451⁄2” DW1746

415-824-4300

415-824-4300

INDUSTRIAL SDS PLUS BITSSize Code1⁄4”x6” DW54171⁄4”x81⁄2” DW54185⁄16”x6” DW54245⁄16”x12” DW54263⁄8”x6” DW54273⁄8”x12” DW54301⁄2”x6” DW54371⁄2”x12” DW54399⁄16”x6” DW54429⁄16”x12” DW54435⁄8”x8” DW54465⁄8”x12” DW54473⁄4”x8” DW54533⁄4”x12” DW54557⁄8”x8” DW54607⁄8”x12” DW54611”x10” DW54641”x18” DW5466

SDS Chuck AdapterDW5351

Chuck Key1⁄2” DW5353

Ideal for drilling holes in stone, brick,concrete, and most other masonryproducts. For use in SDS hammers.


169

SPLINE SHANK PERCUSSION BITSize Code3⁄8”x13” DW57011⁄2”x16” DW57045⁄8”x16” DW57103⁄4”x16” DW57157⁄8”x16” DW57191”x16” DW572111⁄8”x16” DW572511⁄4”x16” DW572713⁄8”x16” DW572911⁄2”x16” DW5732

OverallDiameter Length Description Code

1⁄8” 23⁄4” General Pupose Bit DW66011⁄8” 21⁄4” Drywall/Outlet Bit DW66031⁄8” 23⁄8” Guide Point Bit DW66051⁄4” 31⁄4” Window & Door DW6609

OverallDiameter Length Description Code

1⁄8” 2” 1⁄8” Carbide Burr Bit DW66111⁄8” 2” 1⁄4” Carbide Burr Bit DW6613

Diameter Code1⁄8” DW66151⁄4” DW6617

CUT OUT TOOL ACCESSORY

Features:

• One flute design providesincreased chip clearance for fastcutting (DW6601, DW6605,DW6609).

• Left-hand spiral directs chips anddust into wall cavity for a cleanerwork environment (DW6601,DW6605, DW6609).

• Guide point design for effectivecutting around outlet boxes andother objects (DW6605).

• 1⁄4” diameter for increaseddurability (DW6609).

• One flute design providesincreased chip clearance for fastcutting (DW601, DW6605,DW6609).

• Left-hand spiral directs chips anddust into wall cavity for a cleanerwork environment (DW6601,DW6605, DW6609).

• Guide point design for effectivecutting around outlet boxes andother objects (DW6605).

• 1⁄4” diameter for increaseddurability (DW6609).

REPLACEMENT COLLETS


170 415-824-4300

415-824-4300 171

INDUSTRIAL RECIPROCATING SAW BLADES, 1⁄2” UNIVERSAL SHANK


Size Qty Code6” 6T BI-MT Fast Cut Wood5 5EA DW48024” 14T BI-MT Metal 5EA DW48074” 18T BI-MT Metal 5EA DW48104” 24T BI-MT Metal 5EA DW48126” 14T BI-MT Metal 5EA DW48086” 18T BI-MT Metal 5EA DW48116” 10-14T BI-MT Wood/Metal 5EA DW48458” 10-14T Wood/Metal 5EA DW48466” 5-8T BI-MT Wood/Nail EM 5EA DW48479” 5-7T BI-MT Wood/Nail 5EA DW484812” 5-7T BI-MT Wood/Nail 5EA DW48499” -6T BI-MT Wood Fast Cut 5EA DW480312” -6T BI-MT Wood Fast Cut 5EA DW48046” -6T BI-MT Wood/Compos Fast Cut 5EA DW48506” -6T BI-MT Plasterboard 5EA DW48516” -10T BI-MT Wood/Metal 5EA DW48066” -3TH Wood Nail 5EA DW48018” -18TH Metal 5EA DW48219” -14TH Metal 5EA DW480912” -14TH Metal 5EA DW48386” -6TH Demolition 5EA DW48628” -6TH Demolition 5EA DW48636” 10-14TH Demolition 5EA DW48648” 10-14TH Demolition 5EA DW4865

Offers an extensive line of highperformance industrial reciprocatingblades providing durability andmaximum cutting performance.

• Thicker and wider blank designoffers durability and accuratecutting.

• Precision sharpened teeth for highperformance and ease of cut.

• Heat treated and tempered formaximum life in industrialapplications.

• Ideal for cross cutting, rippingscrolling, and plug cuttingapplications.

INDUSTRIAL JIG SAW BLADES

Wood Cutting

• Reinforced tooth design forprecision cutting and long life.

• Side chip path for superior finish.

• Cobalt steel teeth for greaterdurability.

Metal Cutting

• Reinforced tooth design forprecision cutting and long life.

• Enlarged gullet for efficient chipremoval.

• Cobalt steel teeth for greaterdurability.

Teeth Per Blade Universal T ShankInch Length Qty Type Shank (Bosch)

6 4” 3 Very fast cut – DW3750rough finish wood.

6 4” 3 Ripping/crosscut DW3700 DW3751straight cutting (wide).

6 4” 3 Fast cut DW3703 DW3753clean finish wood.

10 4” 3 Fine cut DW3710 DW3760smooth finish wood

12 3” 3 Trim/coping DW3715 DW3765wood cutting.

18 3” 3 Medium metal cutting. DW3774

24 3” 3 Thin metal cutting. DW3724 DW3776

24 5-1⁄4” 3 Extra long DW3726–

Thin metal cutting.36 3” 3 Sheet metal cutting. DW3728 DW3778


172

LAMINATE TRIM BITS Cutting Cutting Shank Shank OverallDia Length Dia length Length Code3⁄8” 1⁄2” 1⁄4” 11⁄16” 23⁄8” DW64311⁄2” 1⁄2” 1⁄4” 11⁄8” 211⁄16” DW6434

CARBIDE PORTABLE TOOL LAMINATETRIM BITS

Cutting Shank Type OverallDia Dia Of Cut Length Flutes Code7⁄16” 1⁄4” 22º bevel 9⁄32” 2 DW6437

Flush & 22º 15⁄32” 1 DW6441

Carbide laminate with bearing guide.Designed for fast, smooth trim cuts.Precision ground to close tolerance forperfect results. Complete with dust-slinger shield ball bearing guide, whichprevents marring or burning of edgesurface at any feed rate.

A variety of bits for laminate trimmerapplication.

PANEL PILOT BITS Cutting Cutting Shank Shank OverallDia Length Length Dia Length Code1⁄4” 3⁄4” 1⁄4” 1” 21⁄2” DW6442

For use in cutting panels andwindows, floors and ceiling cutoutswhere abrasive materials areencountered. All bits equipped withdrill-through point. Available in single-flute or longer-lasting, smoother-cutting two-flute design.

STRAIGHT BITSCarbide tipped, straight flute bits.

Cutting Cutting Shank Shank OverallDia Length Dia Length Length Code1⁄8” 5⁄16” 1⁄4” 1” 15⁄8” DW64073⁄16” 1⁄2” 1⁄4” 1” 17⁄8” DW64091⁄4” 3⁄4” 1⁄4” 1” 2” DW64113⁄8” 1” 1⁄4” 11⁄16” 25⁄16” DW64171⁄2” 1” 1⁄4” 11⁄16” 25⁄16” DW64183⁄4” 3⁄4” 1⁄4” 11⁄16” 21⁄16” DW6421

CARBIDE MORTISING BITS Cutting Cutting Overall ShankDia Length Length Dia Code1⁄2” 3⁄4” 2” 1⁄4” DW6427

Carbide tipped designed for use with allhinge butt templates. Deep center gulletallows maximum chip removal.

415-824-4300

PAIR OF CARBIDE PLANER BLADESQty Code1 PR DW6654

• For use with DW677K, DW680K, or DW678K

• Reversible carbide straight blades.

• Sharpening on both sides allowsreversal for longer life.

415-824-4300


173

CARBIDE BEADING BITS Large Cutting Shank OverallRadius Dia Length Dia Length Code1⁄4” 1” 1⁄2” 1⁄4” 17⁄8” DW64453⁄8” 11⁄4” 5⁄8” 1⁄4” 21⁄16” DW6447

CARBIDE CORE BOX BITS (ROUND NOSE BITS)

Cutting Cutting Shank Shank OverallRadius Dia Length Dia Length Length Code1⁄4” 3⁄8” DW64811⁄2” DW6483

CARBIDE COVE BITS Cutting Cutting Shank Shank OverallRadius Dia Length Dia Length Length Code1⁄4” 7⁄8” 1⁄2” 1⁄4” 1” 115⁄16” DW64611⁄2” 13⁄8” 21⁄32” 1⁄4” 1” 21⁄8” DW6463

CARBIDE ”V” GROOVING BITS Large Carbide Cutting Shank Shank OverallDia Height Length Dia Length Length Code1⁄4” 5⁄16” 5⁄32” 1⁄4” 15⁄8” 2” DW64863⁄8” 1⁄2” 3⁄16” 1⁄4” 11⁄32” 121⁄32” DW6487

CARBIDE CORNER ROUNDING BITS Large Cutting Shank OverallRadius Dia Length Dia Length Code3⁄6” 1” 15⁄32” 1⁄4” 2” DW64491⁄4” 1” 15⁄32” 1⁄4” 2” DW64513⁄8” 11⁄4” 5⁄8” 1⁄4” 27⁄16” DW64551⁄2” 11⁄2” 11⁄16” 1⁄2” 29⁄16” DW6457

Carbide tipped. Designed for shallowand deep grooving cuts in solidwoods and composition materials.Maximum depth of cut on this seriesis one-half of the cutting diameter.

Carbide tipped. Double fluted carbidecove bits are for decorative edging.They feature a shielded ball bearingguide which prevents marring or burningof edge surfaces at any feed rate.

Carbide tipped. The high, up-shearangle lifts the chip out of the corebox cut to give a perfect radius cutwith no fuzzing. Round-nose bits areoften used in pattern and furnitureplants. Soft or hard woods,composition materials are easilymachined with these bits. Precisionground radii held to close tolerances.

Carbide tipped. Designed especiallyfor satin-smooth, uniformly roundededges. Can be converted to beadingbit type by substituting replacementbearing 3⁄8” DW6920.

Carbide Tipped. Designed especiallyfor decorative edging. Leaves a 1⁄16”edge bead. Can be converted tocorner rounding bit by substitutingreplacement bearing 1⁄2” DW6922.


174

CARBIDE RABBETING BITS Large Cutting Depth Shank OverallDia Length Of Rabbet Dia Length Code11⁄4” 1⁄2” 3⁄8” 1⁄4” 25⁄8” DW6464

CARBIDE ROMAN OGEE BITS

Large Cutting Shank OverallRadius Dia Length Dia Length Code3⁄16” 13⁄8” 9⁄16” 1⁄4” 23⁄8” DW6474

CARBIDE OGEE BITS

Large Cutting Shank OverallRadius Dia Length Dia Length Code5⁄32” 11⁄16” 15⁄32” 1⁄4” 21⁄8” DW64691⁄4” 13⁄8” 3⁄4” 1⁄4” 23⁄8” DW6470

Carbide tipped. Carbide rabbeting bitsdesigned for fast smooth step cuttingin wood and composition materials.

Carbide tipped. Double fluted bits withfillets feature high axial and radialhood angles for fast, clean cutting.One or two fillets available.

Carbide tipped. Designed fordecorative molding on a variety ofhardwoods and composition materials.Two radii are precision ground toensure matching patterns.

CARBIDE CLASSICAL BITS Large Cutting Shank OverallRadius Dia Length Dia Length Code5⁄32” 11⁄2” 11⁄16” 1⁄4” 25⁄8” DW6467

Carbide tipped. For classic decorativedesign. The classical bits feature ashielded ball bearing guide whichprevents marring or burning of edgesurface at any feed rate.

CHAMFER BITS Overall Flute Shank Shank Bearing OverallBevel Dia Length Dia length Dia Length Code45º 11⁄2” 5⁄8” 1⁄4” 11⁄4” 1⁄2” 23⁄16” DW6476

Two flute, carbide tipped, ball bearingpilot. For beveling and decorativeedging.

DOVETAIL BITS Cutting Cutting Shank Flute OverallDia Length Dia Length Length Code17⁄32” 1⁄2” 1⁄4” 11⁄8” 15⁄8” DW6488

For making dovetail joints. Carbidetipped.

415-824-4300

415-824-4300


175

CARBIDE SAW BLADES• Triple action sharpening process-

grinds carbide tip to a razor sharpcutting edge for exceptionallysmooth finish.

• Heavy-duty C-3 tungsten carbidetips maintain cutting edge forlonger blade life.

• Thin kerf blade design yields morecuts per charge by minimizingbattery drain.

• Reamed arbor hole minimizes bladerunout for smoother cutting action.

• Fully hardened heat treated steelbody retains its extreme flatness fora more accurate cutting line.

INDUSTRIAL DRY CUT DIAMOND SAW BLADES Size Code

41⁄2” DW4701

Guard for 4” Angle GrinderB40289

Size Code53⁄8”x24 Th DW905461⁄2”x18 Th DW316181⁄4”x24 Th DW318281⁄4”x40 Th DW318471⁄4”x36 Th DW357671⁄4”x24 Th Framing DW357871⁄4”x18 Th Demolition DW319110”x32 Th DW310310”x60 Th DW310612”x32 Th DW312312”x80 Th DW3128

These continuous rim diamond bladesprovide the ultimate performance inconcrete, reinforced concrete, stone,granite, brick, tile and most other masonrymaterials. Lasts up to 100 times longerthan abrasive blades.

• Cuts faster and easier with less powerrequirements from the tool.

• Superior edge design provides an efficient means to clear dust from cut.

• Constant depth of cut eliminatesmultiple blade changing.

• Continuous rim design provides longlife with less breakage than othertypes of diamond blades.

• Ideal for use with portable electric tools.No water is needed. Cuts dry.

DEWALT™ HIGH PERFORMANCEMASONRY BLADEDiamond mator provides improvedperformance and lasts up to 30times longer than abrasive blades.

Size Code7” DW4712

HARDIPLANK® CIRCULARSAW BLADES• Designed for cutting fiber cement.

• Polycrystalline diamond toothdesign

• Six teeth for smooth cuts and clean finish.

Size Code71⁄4” DW3193

For high performance and quality cuts inmetal and masonry.

• Metal arbor prevents “shearing.”

• Double reinforced for increased life anddurability.

• Industrial formulation provides long life.

• Ideal for use in cutting and choppingapplications on all 7” and 8” circular saws.


176

INDUSTRIAL ABRASIVESBLADES Size Type Qty Code

7” Metal EA DW3511Masonry DW3521

WD40 LUBRICATING OIL

Code93WD40

INDUSTRIAL ABRASIVES DEPRESSED-CENTER WHEELS Size Type Qty Code

41⁄2” Metal EA DW4514Masonry DW4524

Industrial grade grinding wheel for heavy-dutycutting, grinding and material removalapplications.

• Double reinforced with industrial grit andglue for increased life and faster cuts.

• Superior friability that allows the wheel tobreak down and dissipate rather than meltdown thus increasing sharpness for longerlife and maximum grinding applications.

415-824-4300

CMT FRAMING/DECKING BLADES• Take the finest industrial quality blade

right to the job site with CMT’s newFraming / Decking blade.

• With 24 tough carbide teeth, theseblades are designed for general rip andcut off work where speed, efficiency anddurability are the key considerations.

Size Code71⁄2”x24th DW3500

415-824-4300

AIR TOOLS AND ACCESSORIES

177

TYPE “C” AUTOMOTIVE STANDARD Thread Type NPT Size Code

Male 1/4” 98W104

Female 1/4” 98W103

Male 1/4” 98W105

Female 1/4” 98W106

COUPLERS

Thread Type NPT Size Code

Male 3/8” 98W104B

Female 3/8” 98W103B

Male 3/8” 98W105B


PLUGS

COUPLERS

PLUGS


178 415-824-4300

TYPE “G” AUTOMOTIVE STANDARD


Male 3/8” 98W104A

Female 3/8” 98W103A

Male 3/8” 98W105A


TYPE “D” INDUSTRIAL INTERCHANGE


Male 1/4” 98W102


Male 1/4” 98W102C


COUPLERS

PLUGS

COUPLERS

PLUGS


179415-824-4300

Male-NPT Female-NPT Code

3/8” 1/4” 98W6814

1/4” 3/8” 98W6815

MALE PIPE COUPLINGSSOLID BRASS NPT

BUSHINGS AND ADAPTORSSOLID BRASS NPT

Male-NPT Male-NPT Code

1/4” 1/4” 98W1414

1/4” 3/8” 98W3814

3/8” 3/8” 98W3838


415-824-4300

DEWALT EMGLO™ COMPRESSORS• 2HP electric twin stack.

• Direct drive

• 120V AC 14 AMP, 60HZ, 2 poleinduction motor.

• 3.2CFM

• 3400RPM

• 53.32 lbs

Qty CodeEA BA55151

DEWALT NAILERSCode

• 15 Ga. 34˚ angled finish nailer. BA51275• 3.85 lbs• 1-1/4” – 2-1/2”• 110 nails.• Rear load, dual load.• Tool-free indexed.• Low profile overmolded.• Tool-free reversible.• Tool free.

Code• 16 Ga. finish nailer. BA51256• 3.9 lbs• 1-1/4” – 2-1/2”• 160 nails.• Rear load, dual load.• Tool-free indexed.• Low profile overmolded.• Tool-free reversible.• Tool free.

Code• 18 Ga. 2” brad nailer. BA51238• 2.8 lbs• 5/8” – 2”• 110 nails.• Side load• Tool-free indexed.• Low profile overmolded.• Tool-free reversible.• Tool free.

Code• 20˚ full round head framing nailer BA51845• 7.6 lbs• 2” – 3-1/2”• .113” – .148”• 65 nails• Drop sleeve• Tool-free indexed.• Tool-free reversible.• Tool free.

180

Code98W015Benefits

• Easily operates in confined areas.• Light weight.• Low cost.• Sale-cannot misfire nails.• Capable of driving any nail from 700 spikes to small

finishing nails with equal ease and accuracy.• Variable depth control.• Backed by one of the strongest warranties in the industry.• Designed by tradesmen for tradesmen.• Made in America using only American made components.

Advantages• Eliminates bent nails.• Eliminates Carpenters Thumb.• Eliminates mis-directed hammer blows.• Eliminates inspection problems.• Guarantees accurate/precise nailing.• Reduces fatigue.

PALM NAILERS

415-824-4300


181

BLOW GUN• Perfect tool for cleaning. Size Code

1/4” Female pipe thread 98W002

3⁄8” AIR-LINESize Code50’ 98W001

• Heavy duty rubber hoseassembly.

• 2 ply braided hose withconnectors.

AIR TOOL LUBRICATING OILSize Code4OZ 98W040

HITACHI NR83A 22FRAMING NAILER Code

98W100

O

Type Qty CodeBattery (ALL) EA 98W040A

Type Qty CodeTool Oil EA 98W040B

Type Qty CodeDegreaser Cleaner EA 98W040C

PASLODE® TOOLS AND ACCESSORIES

182415-824-4300

PASLODE® CORDLESS FUEL CELLSType Qty CodeAngled 4 EA 98W040D

Straight 2 EA 98W040E

Framer (Red) 2 EA 98W040F

PASLODE® CORDLESS TOOL ACCESSORIES

• Fast Set Up – The convenience of nohoses, no compressors.

• Lightweight and Well-Balanced –Very maneuverable. Work all daywith less arm fatigue.

• Easy to Operate – Depress tool onlyto drive a nail. Fits between joistsand studs.

• Reliable, State-of-Art Electronics –Consistent long-life ignition. Nobreak-in period. No “flooding.”Consistent nail drive and speed.

• Powerful Motor – Drives 2” to 3”fasteners for every framingapplication. Versatile: can do a widevariety of jobs with one tool.

• Mobile – Allows you to movethroughout the job site without anyrestrictions.

• Tackles Tight Spots – Lets you workcomfortably in cramped overhead andother hard-to-reach places.

• Heavy-Duty Housing – These toolsare tough! The reinforced durablehousing comes with a 5-year warranty.

• Lockout Feature – Locks out tool atfour nails to prevent blank firing.

• Sequential Operation – Prevents“bump-firing” tool.

Convenient Carrying Case:

Cordless tools come with their ownhard-sided carrying cases. Standardequipment includes:

• Cordless Framing Nailer.

• Rechargeable battery.

• 2-hour AC battery charger.

• Convenient storage compartments forfuel cells and fasteners.

• Easy-to-follow owner’s manual.

• Clear safety glasses.

• Fuel cells and fasteners soldseparately.

Model Size Qty CodeIM250II 16 GA EA 98W100A

PASLODE® TOOLS AND ACCESSORIES

183415-824-4300

PASLODE® CORDLESS NAILERSBoth impulse tools come with theirown hard-sided carrying cases,each including:

• Rechargeable battery.

• 3-hour AC baterry charger.

• Clear and tinted* safety glasses.

** Fuel calls not included.

PASLODE® CORDLESS UTILITY FRAMING NAILER

Straight Brad Nailer

Model Qty CodeIMCT 30º EA 98W100C

Model Size Qty CodeIM250A 16 GA EA 98W100B

Angled Finish Nailer

415-824-4300

CONCRETE AND STUCCO PRODUCTS

184

FAST SETTING CONCRETE MIXSize Code50# 91WQCFS

CONCRETE MIXSize Code60# 1⁄2 cubic foot 91WQCCM

For any general concrete work. Properblend of cements, sand and gravel.Just add water.

• Simplifies projects for do-it-your-selfers.

• Provides contractors with thesolution for many specialized jobs.

• For setting posts, building sidewalks,steps, patios, curbs, footers, floors,downspout troughs, etc.

A blend of special cements, sand andgravel. Sets hard in a few minutes.Walk-on time is less than an hour.

• For setting posts without mixing.Just pour (dry) into hole withwater.

• For steps or slab-settingplatforms.

• For appliances, swing sets, clotheslines, basketball backboards, etc.

QUIKRETE® CONCRETE ACRYLIC FORTIFIERSize Qty Code1QT EA 91WAD111GAL 91WAD12

A water resistant acrylic resin mixturefor concrete, cement, plaster, patching,sealing stucco, and masonry.

Provides exceptional strength whenmixed with Quickrete® cement mixesor Quickwall®, provides non-slipcoating around pools when used withQuickrete® sand mix. For floor levelingand underlayment mix, Quickcrete®

with acrylic fortifier.


185

PORTLAND CEMENT

ALL-PURPOSE SAND

MASON MIXSize Code60# 91WQCMM

Size Code70# 91WQCSA

Size Code47# 91WQCCE

For many uses, including traction onsnow and ice, cat litter boxes,underlayment base for brick patiosand walks, etc.

For laying brick, block or stone. Ablend of masonry-type cement andgraded sands. Just add water.

• Simplifies mixing mortar for layingbrick, block or stone.

• A long lasting, strong bondingmortar.

415-824-4300

415-824-4300


186

RAPID SET® MORTAR MIX/ONE STEP STUCCO Size Code

55# 91WRSMM

RAPID SET® NON-SHRINK GROUT/CEMENT ALL™ Size Code

10# 91WRSG125# 91WRSG255# 91WRSG5

PIER BLOCKSize Code8” 91WPIER

All is so versatile it can be mixed froma no slump (very stiff consistency) toa high slump (very wateryconsistency). This ability to be able tomix one product to wide degrees ofslump make it appropriate for virtuallyany application. Gaining outstandingstrength, this product mixed waterywill achieve 3,500PSI in one hour andmixed stiff will achieve 6,500PSI in onehour at 72º.

Rapid Set® Mortar Mix/One step Stuccois Rapid Set® cement mixed with plasterand sand. This product can be appliedas a one step stucco repair materialand is used 7⁄8” or thicker, replacing thescratch and brown coat. It is capable ofallowing the finish (color) coat to beapplied in one hour. There is no limeadded, no bonding agent needed andbecause it is non-shrink it will notcrack or pull away from the existingstucco. It can also be used for largeflat work areas, anchoring, and deepfills where small aggregate is needed.This mix will achieve 2,000PSI in onehour at 72º.

REBAR/RELATED TOOLS AND ACCESSORIES

187

REBAR CAP Orange PUC protector cap.

REBAR

Size Code3⁄8!–1” 9RECAP

Size Code1⁄2”x2’ 9REBAR1⁄2”x10’ 9REBAR3⁄8”x20’ 9REBAU1⁄2”x20’ 9REBAR5⁄8”x20’ 9REBAS

REBAR CUTTER/BENDERSize Code1⁄2!– 5⁄8” 9RECUT

Manufactured to ASTMspecifications for deformedconcrete reinforcing bars.20’ lengths, grade 40.

Portable tool for cutting and bendingrebar. Cutting capacity: #5 rebar.

415-824-4300

415-824-4300


188

16 GAUGE BLACK REBAR TIE WIRESize Code31⁄2LB roll 9TWIRE

TIE WIRE REEL (PLASTIC)Convenient holder for collected tie wire. Code

9TWIRH

QUICK TIE

QUICK TIE TOOLUsed to install Quick Tie tie wire. Code

9TWTOL

REBAR TIE BLOCKSSize Code3”x3”x3” 91WDOB3

Use as bar tie or bag tie. Tensile rangeof 45,000–60,00PSI.

Size Code6” 9TWIRT68” 9TWIRT


189

CONSTRUCTION STAKES Size Code12” 9RSTK118” 9RSTK224” 9RSTK336” 9RSTK448” 9RSTK5

FOUNDATION BOLT HOLDERSize Code1⁄2” Blue 99FH045⁄8” Pink 99FH053⁄4” Yellow 99FH06

HDG SQUARE WASHERSSize Hole Diameter Code2”x2”x 3⁄16” 1⁄2” 99SW2221⁄2”x21⁄2”x 1⁄4” 5⁄8” 99SW243”x3”x 1⁄4” 3⁄4” 99SW303”x3”x 5⁄16” 7⁄8” 99SW703”x3”x 1⁄2” 1” 99SW80

SAFETY FENCESize Code4’x100’ ZTFEN2

Made of 3⁄4” diameter high tensilesteel with tempered points.90,000PSI. Ideal for use as screenpost or curb and gutter stakes.

Heavy-duty, reinforcing washers.

Holds foundation bolts in properposition during curing of foundation.

A low cost polymer grid developedfor temporary installations as fencingor traffic/safety control in and aroundconstruction sites, land fills and workareas.13⁄8”x11⁄4” grid.

415-824-4300

415-824-4300

MOISTURE METERS

190

C505 CONCRETE SHOPLINE• Provides fast initial moisture

indication.

• Easy to read LED display.

• Scans .875” x 2.5” x .5” depth.

• Ultra-compact, pocket size.

• Carrying case included.

Qty CodeEA ZWC505

C575 CONCRETE PROLINE• Provides fast initial moisture indication.

• Pocket size easy to read, analog meter.

• Scans 1.5” x 2.5” x .75” depth.

• Quickly survey concrete.

• Battery and carrying case included.

Qty CodeEA ZWC575

L606 INSPECTOR PROLINE• Scans 1.5” x 2.5” x .75” depth.

• Measures moisture content 5%-30%.

• Pocket size easy to read, analog meter.

• Species adjustment table.

• Quickly scans whole boards.

• Battery and carrying case included.

Qty CodeEA ZWL606

MOISTURE METERS

191

L609 SHOPLINE• Scans .875” x 2.5” x .75” depth.

• Ideal for hard, soft, importedspecies.

• Ultra-compact, easy to read LED display.


• Carrying case included.

• Measures moisture content 4%-22%.

Qty CodeEA ZWL609

HYDRO-THERMOMETER CLOCK• Ideal for desktop or wall.

• Designed for jobsites, factories,offices.

• Affordable, professional.

• Monitors time, temperatures, humidity, records extremes.

Qty CodeEA ZWT100

415-824-4300

L607 DUAL DEPTH PROLINE• Scans 1.5” x 2.5” x .5” depth.

• Measures moisture content5%-30%.

• Read waterbone finishapplications.

• Pocket size easy to read, analogmeter.


• Battery and carrying caseincluded.

Qty CodeEA ZWL607

415-824-4300

ELECTRICAL

192

ADAPTERS• Industrial jobsite quality. Code

locking connector to U-ground, 12/3, STW ZA1985

CodeAdapter—Male UX/Female U Ground ZA1986

Code3-outlet power block, 12/3, STW ZA1987U-Ground

Code3-outlet power block, 12/3, STW ZA1988Twist to U-Ground

CodeLocking connector, “Y” adapter, 12/3, STW ZA1989

CodeU-ground, “W” adapter, 12/3, STW ZA1990

CodeLocking connector, “W” adapter, 12/3, STW ZA1991

STRAIGHT BLADE CONNECTORS• Commercial specification grade

straight blade, plugs, andconnectors.

• They are moisture, chemical, and abuse resistant.

• Indoor and outdoor use.

CodePVC grounding connector ZA1993

CodePVC grounding plug ZA1994

ELECTRICAL

193

ADAPTERSCode

3-outlet wild adapter ZA1992

415-824-4300

AC QUIET SWITCHES• Faster installation with

combination of side wiring andquickwire push in wiring.

• Impact-resistant durable thermoplastic toggle.

Style Color CodeSingle pole Ivory ZA1995Single pole White ZA1996

Style Color Code3-way Ivory ZA19973-way White ZA1998

STRAIGHT BLADE RECEPTACLES• Terminal screws accept up to

No.10 copper wire or copper cladwire.

• Quick push-in terminals acceptNo.14 solid copper wire only.

Color CodeIvory ZA1999White ZA1999A

415-824-4300

ELECTRICAL

194

SPECIFICATION GRADE THERMOSET WALL PLATES

• 1 Gang toggle switch

• 1 Gang duplex receptacle

Color CodeIvory ZA1999BWhite ZA1999C

Color CodeIvory ZA1999DWhite ZA1999E

VINYL EXTENSION CORDSSize Code25’ 16⁄3 ZA197050’ 14⁄3 ZA1975100’ 12⁄3 ZA1980

Three conductor round orange cord.300V, UL-Listed, meets OSHArequirements for outdoor use. Highvisibility vinyl insulation resists oil,grease, moisture, abrasion, andprolonged exposure to sunlight.Heavy-duty molded-on plugs andconnectors. SJTW-A wire type, 15A125RPM rating.

LED-LENSER TURBO TORCHESTwo German optoelectric engineers,Rainer and Harold Opolka, first designedthese revolutionary NEW lightinginstruments in the late 1990’s. Sevenyears and 14 patents later, LED-Lenser“Turbo Torches” are available for theconsumer market from Coast. Byemploying State-of-the-art computer chiptechnology, these unique lightinginstruments provide a higher level ofenergy efficiency and greater brightnessthan conventional lights.

Key Chain Qty CodeEA ZA1999F

V2 TRIPLEX• 3 spot power beam

• 100 hrs. of light withouta battery change

• 3 Photon tube Reflectors

• 3 Diode-charged systems

• 5 7/16 in. length

• Includes sheath

Qty CodeEA ZA1999G

STAIR TOOLS

195415-824-4300

RAIL BOLT INSTALLER

Qty CodeEA 6S9540

(A) Conect-A-Kit: Locates 1/4” Dia. pilothole on handrails and rail drops forattaching to Conect-A-Kit fittings andeasements. The T-92 is also used toassemble Conect-A-Kit fittings.

1. Locate and mark the 1/4” dia. lag boltpilot hole on the end of the handrail orrail drop using the 1 1/8” tabs on theRail Bolt Installer tool. Sight thehandrail centerline through the hole inthe installer tool.

(B) Rail Bolts: Locates holes as well asstarts and tightens hex-nut onto railbolt. The T-92 Drives 5/16” rail boltsand tightens 1/2” hex-nuts.

2. Locate and mark the 1/4” dia. railbolt pilot hole on the easement andthe 3/8” dia. clearance hole on thehandrail using the 15/16” tabs on theRail Bolt Installer tool. Sight thehandrail centerline through the hole inthe installer tool.

3. Locate and mark the center of the 1”dia. access hole on the bottom of thehandrail using the 1 3/8” tabs on theinstaller tool. Sight the handrailcenterline through the hole in theinstaller tool.

4. Thread the rail bolt into the Rail BoltInstaller tool. Lock the rail bolt hex-nutagainst the installer tool and drive therail bolt into the easement pilot holeusing the installer tool as a T-Handle.Note: use of a drill and Rail Bolt-Runner TM (3032) may make this aneven easier task.

5. Use the socket-head end of the toolto tighten the rail bolt nut up inside ofthe 1” dia. access hole.

RAIL BOLT-RUNNERDrill attachment with machine threadswhich drives the Rail Bolt into handrails,fittings, newels and walls. Fits theChuck-Buster TM.

1. With Rail Bolt-Runner TM mountedin chuck or in the Chuck-Buster TM

(3031), start up the drill motor andhand start the rail bolt in the runner.

2. With bolt accured in the Rail Bolt-Runner TM, drive the bolt to thedesired depth (usually the joint of thetwo thread styles).

3. Reverse drill motor to disengagethe Rail Bolt-Runner TM.

Qty CodeEA 6S9545

DOWEL-RUNNERDrill attachment with lag threads whichdrives dowel screw into baluster bases.Fits Chuck-Buster TM (3031).

1. With the Dowel-Runner TM

mounted in chuck or the Chuck-Buster TM (3031), start up the drillmotor and hand start the dowelscrew in the runner.

2. Now that the screw is accure inthe Dowel-Runner TM, drive the screwto the desired depth in baluster base.

3. Reverse drill to disengage theDowel-Runner TM.

Qty CodeEA 6S9550

DOWEL CENTAURFor 11/4” and 13/4” balusters onlyCenters 9/32” hole in baluster bases fordowel screws. Fits 1 1/4” and 1 3/4”balusters. Doubles as a drill bit guide and acentering device.

1. Push the Centaur TM over the base ofthe baluster until it “seats”.

2. Use 9/32” twist drill to drill the holeto the desired depth (make certain thatthe hole is deep enough).

3. Remove the drill bit and Centaur TM.

STAIR TOOLS

196 415-824-4300

EZ STAIR XTRA SPACERS

EZ-STAIR® STAIR BUILDING KIT• Adjustable stair brackets.• Interior stairs.• Exterior stairs.• Concrete form work.

QTY SIZE Code2EA 94EZRP8EA 94EZCB

QTY SIZE Code8EA 94EZC5

11 .. Set the brackets on the two 2 x 6stringer members using the spacersand pivot screws.

22 .. Remove spacers and rotatebrackets to adjust stair height.

33 .. Fix brackets in position, attachrisers and treads.

Qty CodeEA 6S9555

To change Centaur TM from 1 1/4”, simply remove the core with a twistingmotion. Centaur TM is now ready to use on 1 3/4” balusters.

spacer

stringerpivot screws

bracket

spacer

stringer

PUSH

PUSH

cut ends

tread

riser

rotate

pivot screws

bracket

3 EZ STEPS INSTALLATION INSTRUCTIONS

Qty Length CodeEA 8’ CR4

ANGLE ADAPTERS(PATENT PENDING)

Available in 6 colors to matchyou balusters!For stair installation, simply useAngle Adaptors (sold separately).No need to cut balusters, calculateangles, or pre-drill rail. Simply snapinto place.The Adaptors come in baluster-matching colors that blend nicelywith the rail system.

Color Qty CodeBlack 15pcs / bag DB1AGreen 15pcs / bag DB2AWhite 15pcs / bag DB3A

PRE-DRILLED PROFILEDRAILS

NO NEED TO MEASURE! Our rails areconveniently pre-drilled for an openingwith less than 4” spacing betweenbalusters.

RAIL-TO-POSTHARDWARE KIT

Color Qty CodeBrown 4pcs / bag DB3CGreen 4pcs / bag DB3D

TRADITIONAL STRAIGHTALUMINUM BALUSTERS

Made especially for the CreativeRailSystem, these aluminum balusters arerust-free with a premium powder-coasted finish, 25 year warranty,corrosion resistant and ACQ compatible.These balusters are low-maintenancebecause all you need to do is wipethem clean.

Color Qty Length CodeBlack EA 32” DB1Green EA 32” DB2White EA 32” DB3

STAIR HARDWARE

197415-824-4300

TRADITIONALSERIES KITS

Color Qty Length CodeBlack EA 8’ DBK1Green EA 8’ DBK2White EA 8’ DBK3

Available in two sizes to accommodate various rail heights: 26” & 32”

Installing your rails to posts hasnever been easier with the Rail-to-Post Hardware Kit. Complete withpowder-coated aluminum bracketsand stainless steel painted screws,these fastener will definitely save youtime and frustration. Available in

green and brown to compliment yourchoice of Cedar and Treated railing.

• 2 pieces of pre-drilled rail -951/2”

• Set of Aluminum balusters -36”

• 1 rail to post hardware kit

• Available in powder coated finishes

• 25 year warranty

left stairbaluster

right stairbaluster

TUSCANY STAIRBALUSTERS

Available are balusters designedespecially for stair applications.Combined with Angle Adaptors, thebalusters are simple to install and willlook great with your railing system.

Stair Balusters also offered separately ina variety of colors.

TUSCANY CURVED ALUMINUM BALUSTERS

Made especially for the CreativeRailsystem, these curved aluminumbalusters are rust free with a premiumpowder coated finish, 25 year warranty,corrosion resistant and ACQ compatible.These Balusters are low-maintenancebecause all you need to do is wipethem clean.

Balusters are also offered in a varietyof colors.

TUSCANY SERIES KITS

“Grab & Go” KitsEEaacchh ““AAll ll IInn OOnnee”” KKiitt CCoonnttaaiinnss::

• Top and Bottom Pre-Drilled Rails*actual size 711⁄2” or 951⁄2”

• 20 curved aluminum balusters*actual size 711⁄2” or 951⁄2”

• 1 Lock-Bar*actual size 711⁄2” or 951⁄2”

• 1 Rail-to-Post Hardware Kit• Easy to follow instructions.

STAIR HARDWARE

198 415-824-4300

Color Qty Length CodeBlack EA 8’ DBK4White EA 8’ DBK6

Color Qty Length CodeBlack EA 8’ DB4Green EA 8’ DB5White EA 8’ DB6

TUSCANY LOCK BARS

Designed exclusively for theCreativeRail: Tuscany System, theseunique, patent-pending aluminum LockBars ensure curved balusters maintainspacing code.

Lock-Bars also offered separately in avariety of colors for additional accents(mix & match).

Color Size CodeBlack 1⁄3’ DB4CGreen 1⁄3’ DB5CWhite 1⁄3’ DB6C

Color Side Qty CodeBlack Left EA DB4ABlack Right EA DB4BGreen Left EA DB5AGreen Right EA DB5BWhite Left EA DB6AWhite Right EA DB6B

NNoottee:: Stand at the bottom of the stairway and look up todetermine which balusters to use. Right balusters project to theright of the stair and left balusters project to the left of the stair.

SEEMORE

Seemore Architectural BalustersLike the name implies, Rail Simple --Seemore Balusters are specificallydesigned to increase the viewing areathrough you railing. These beautifullyshaped balusters are simply attached(top & bottom) to any 2x4 that youchoose, using stainless screws suppliedwith the balusters. Seemore balustersare 11/16”x31” and designed for a 26”height railing system.

RAIL SIMPLE SEEMORE ArchitecturalBalusters are shaped from high-qualityaluminum with a maintenance-free,rust-free premium powder-coastedfinish and backed with a 25 yearwarranty.

Available in two finishes: Texturedpewter or flat black.

Color Qty CodeBlack EA DB7Pewter EA DB8

STAIR HARDWARE

199415-824-4300

VENETIAN

Venetian Architectural BalustersRail Simple -- Venetian Architecturalbalusters are uniquely designed toreplace angle cut wooden balusters andinstantly upgrade your entire outdoorworking space. Simply leave yourexisting rails and newel posts in place,remove your angle cut balusters andreplace with RAIL SIMPLE VenetianArchitectural Balusters. These wider (1x1/2”) and longer (42”) VenetianArchitectural balusters convenientlycover up old wear marks andautomatically revitalize and upgrade thelook of your outdoor living space.

REAL SIMPLE Venetian ArchitecturalBalusters are shaped from high-qualityaluminum with a maintenance-free,rust-free premium powder-coated finishand backed with a 25 year warranty.

Available in two finishes: texturedpewter or flat black.

Color Qty CodeBlack EA DB9Pewter EA DB10

AA Angles 78

Aluminized Membrane 41Abrasive Cutoff Disc 2Abrasive Depressed Center Wheels 2Abrasive Grinding Wheel 2Abrasives

Drywall Sanding Screen 1Drywall Sanding Sheets 1Melamine Glue 4Production Paper Sheets 1Sanding Belts 1

Abrasives Blades 176Acrylic 51Acrylic Latex 7Acrylic Urethane 51Adapters 192, 193Adhesives 3

3m #90 Aerosol Adhesive 4Contact Cement 4Dap “230” Sealant 5Devcon’s Trimbonder™ 7Durock Tile Adhesive 9Extend HD 5Phenoseal Adhesive Caulk 5PL 400 Heavy-Duty Sub-Floor

Adhesive 4Quikrete No.9902 Concrete BondingAdhesive 8Sikaflex-1a 6

Aerosol Adhesive 4Air Bushings 179Air Couplers 177, 178Air Couplings 179Air Fittings 177, 178Air Gun 181Air Hose 181Air Impact Socket Set 161Air Lubricating Oil 181Air Nailer 181Air Plugs 177, 178Air-Line 181Aluminum Rolls 70Aluminum Snips 134Anchor Bolt Holder 189Anchor Bolt Holders 88Anchor Bolts 26, 82Angle Clamp 133Angle Grinder 149Angles and Gussets 85Aqua Gun 131Auger Bit 164Aviation Snips 134Azek Adhesive 3

BBaluster Dowel Runner 195Barrel Bolts 58Barrier Fence 108, 189Beam Levelers 83Bell Hanger Bit 168Bent Putty Knife 113Bit Holder 167Bit Tip 75Bit Tips 24

Combo Bits Double Ended Bits 26Phillips Insert Bits 26Square Drives 26

Black Square Washers 17Blade 114Blade, Planer 172Bleaching Oil 49Blow Gun 181Blue Tape 111Bolt Cutters 136Bolt-Rail Installer 195Bolt-Rail Runner 195Bolts

Carriage Bolts 15Foundation Bolts 26Machine (Hex) Bolts 14Toggle Bolts 27

Wedge Anchors 27Wedge Bolt Hex Heads 26

Bondo 11Bondo Spreader 114Boots 108Bosch Blade 171Brackets

Cast Handrail Bracket 141Handrail Brackets 141Pine Key Hole Corbels 142Ponderosa Pine Shelf Brackets 142Rail Bracket Hardware 141Solid Brass Handrail Brackets 141

Brad Finish Nails 28Brad Point Drill Bit 168Bronze Wool 116Brooms 118Brush 115Bucket Caddy 119Bucket Wipes 117Buckets 119Builder Screws, Self-Drill 21Building Tape 41Bungee Cord 110Butt Hinges 59Butyl-Flex Caulk 4

CCabot

Australian Timber Oil 49Bleaching Oil 49Clear Solution Translucent Tones 46Decking Stain 47Finish 49OVT Solid Color Acrylic Stains 48OVT Solid Color Oil Stains 48Problem Solver Primer 47Semi-Solid Stains 48Semi-Transparent Stains 48Solid Color Decking Stain With TeflonSurface Protector 47Water Based Clear Solution 46Water Proofing with Teflon 46Wood Cleaner Brightener & Stripper 47

Cap, Rebar 187Carbide Saw Blades 175Carpenter Pencil 110Carpet Protector 43Carriage Bolts 15Cast Handrail Bracket 141Caulk

Alex Plus Acrylic Latex w/ Silicone 7Black Jack Fibered Plastic Roof

Cement 7Butyl-Flex Caulk 4Dap “230” Sealant 5Dap Fire Stop Sealant 5Dow Corning Silicone Sealers 6Extend HD 5Jiffy Seal Caulk 8Phenoseal Adhesive Caulk 5Sikaflex-1a 6

Caulking Guns 8Caution Tape 108CB Column Bases 80CBA Column Bases 80Cedar Breather 39Cedar Foundation Vents 71Cement 185Cement Board Screw 25Cement Coated 33Ceramic 9Chalk 109Chalk Reel 109Channel Lock 135Check Point Laser Level 126Chisels 120Circular Saw 149Clamp 133Clear Wood Preservative 44Closet Tubing 144Clothes Pole Sockets 144

Clothes Rod Hardware 144Collets 170Column Cap 96Column End Caps 91Combination Square 121Compact Drive Guide 167Compass Saws 122Compound Miter Saw 155Concrete Bonding Adhesive 8Concrete Additive 184Concrete Bits 169Concrete Float 137Concrete Fortifier 184Concrete Mix 184Concrete Screws 24Concrete Tools 137, 138Concrete Trowel 137Construction Apron 138Construction Stakes 189Contact Cement 4Continuous Hinges 57Coping Saw Blades 122Coping Saws 122Copper Green 44Coppernate Wood Preservative 44Copy Cut Gauge 124Corbels 142Cordless

Dewalt Cordless Battery 161Dewalt DC011 Radio/Cordless Battery Charger 157Dewalt DC385K Reciprocating Saw

Kit W/Electric Brake 158Dewalt DC987KA 18.0V Drill/Driver

Kit 160Dewalt DW052K-2 12V Impact Driver

Kit 159Dewalt DW920K-2 7.2V Pivot

Driver 157Dewalt DW935K 14.4V Saw Kit 158Dewalt DWDC390 18v Saw 158Dewalt DW965K-2 12.0V Right Angle Drill/Driver 159Paslode Cordless Battery 182Paslode Cordless Framing Nailer 183Paslode Cordless Nailer 183

Cords, Extension 194Corner Irons 56Counter Brush 115Coupling Nuts 18Crayon 109Crayon/Lumber Pencil 109Crowbar 131CS Coiled Straps 81Curved Claw 128Cut Out Tool Accessory 170Cut-Out Tool 154Cutting Plier 135

DDap™ “230” Sealant 5Deadbolt 68Dec-Klip 74Deck Hardware 76Deck Pedestal 76Deck Plugs 37Deck Tool 75Deck-Tie Connectors 81Decking Screws

ACQ PT LUMBER Screws 22Builder Screws 20Builder Screws Self-Drill/Nibbed

Head 21Maze Zinclad Screws 22Stainless Steal Square Drive 23

Decking StainsCabot Australian Timber Oil 49Cabot Clear Solution 46Cabot Decking Stains 47Cabot Water Based Clear Solution 46Penofin Ultra Premium 44Sikkens Cetol Srd California 50

Deckmaster Brackets 74Depressed- Center Wheels 176Diamond Saw Blades 175Dobies 188Door Bolts 62Door Holder 67Door Pull 58Door Stop 67Double Blackraft 38Double Ended Bits 26Double Plaster 38Dovetail Saw 122, 124Dowel 36, 196Dowel Bolt Runner 195Dowel Centaur 196Dowel Drill Bit 36Dowel Runner 195Dowels 37Drill and Drive System Set 164Drill Bits

Auger Bit 164Bell Hanger Bit 168Cut Out Tool Accessory 170Dewalt 2513 15pc Rapid Load 165Dewalt 2518 Rapid Load 165Dewalt DW1969 Industrial Drill

Bit Set 162Drill and Drive System Set 164Hole Saw Mandrels 163Hole Saws 163Industrial Drill Bits 162Industrial Round Shank Percussion

Bits 163Masonry Bits 163Percussion Bit 163Power Ship Auger Bits 164Rapid Load 6” Magnetic Drive

Guide 167Rapid Load Compact Drive Guide 167Rapid Load Countersink Set 166Rapid Load Hexshank Bits 166Rapid Load Holder 165Rapid Load Magnetic Nutdriver 167Rapid Load Masonry Bit 166Rapid Load Socket Adapter 167SDS Plus Bits 169Spline Shank Percussion Bit 169Trufit Drill Bit 36Wood Boring Bits 168

Drilling Hammer 129Drills

Dewalt DC983KA Adj Clutch Drill/Driver Kit 160

Dewalt DW100 145Dewalt DW106 145Dewalt DW120K 145Dewalt DW124 145Dewalt DW235G 146Dewalt DW236 146Dewalt DW272 146Dewalt DW965K-2 Right Angle Drill/Driver 159

Drwall Compound 113Drwall Knife 113Drwall Pan 113Drwall Sander 113Dry Wall Anchors

E-Z Ancor 27Heavy Duty Toggler 27

Drywall 112Drywall Corners 72Drywall Hammers 129Drywall J Mold 73Drywall Joint Knife 113Drywall L Mold 73Drywall Metal Trim 72Drywall Nail 32Drywall Sanding Screen 1Drywall Sanding Sheets 1Drywall Screwdriver 146Drywall Screws 19Drywall Tape 111, 112DS Drywall Stop 82

INDEX

i

Foam Roller 116Foam Sealants 10Form Ties 96Foundation Anchors 83Foundation Bolt Holder 189Foundation Bolts 26Foundation Plate 95Foundation Vents 71Framer 128Framer Screws 73Framing Anchors 78Framing Nailer 181Framing Saw 148

GGalvanized Hanger Strap 57Garbage Bags 37Garden Hose 130Gate Fixer 60Gate Hardware 61Gate Hinges 60, 61Gate Latches 60Gate Lock 61Gatemate 61Gloves

Cotton Gloves 106, 107Double Palm Glove 106Leather Drivers’ Gloves 105Leather Palm Gloves 105PVC Coated Gloves 107String Knit/Rubber Coated Glove 106Vinyl Disposable Gloves 106

Glue3m #90 Aerosol Adhesive 4Gorilla Premium Glue 3Waterproof Titebond II Wood Glue 3Waterproof Titebond III Wood Glue 3

Goggles 103Gorilla Glue 3Gravel Stop 69Green Wood Preservative 44Grinder Back-up Pad 2Grinding Wheel 176Grip Locking Pliers 133Groover 138Grout 186Gun Brad 28Gun Nails

Cordless Paslode 30º Framer Nails 28Cordless Paslode Finish Nails 30

HHacksaw 123Hammer (Electric) 151

Dewalt D25203K SDS Hammer 151Dewalt D25550K Rotary Hammer Kit 151

Hammer HolderNylon Hammer Holder 140Swivel Hammer Holder 139

Hammer Tacker 137Hammers

All Steel Ripping Hammers 129Compo-Cast Standard Head Models

Soft Face Hammers 129Drywall Hammers 129Hand Drilling Hammer 129Sledge Hammer 129Swivel Hammer Holder 139Vaughan California Framer 128Vaughan Fiberglass Hammers 128Vaughan Ripping Straight Claw

Hammer 128Vaughan’s Vanadium Claw Nail

Hammer 128Hand Cleaner 117Hand Sander 113Hand Saw 123Hand Wipes 117Handrail Brackets 141Handvac Drywall Sander 112

Hangers 86, 87, 88, 94Hard Hats 104Header Hangers 84Heavy Duty Toggler 27Hex Bolts 14Hex Key 136Hex Lag Screw 16Hex Nuts 17Hinge Hasps 58Hinges 57, 59, 61, 63Holdowns 85, 90Hole Saw Arbors 163Hole Saw Mandrels 163Home Slicker 39Hook & Loop Sanding Discs 2Hose Nozzle 131House Numbers 57HouseWrap 40Hurricane Ties 84

IImpact Driver Kit 125, 159Impact Wrench 147Insert Bits

Combo Bits Double Ended Bits 26Insulating 9Insulation Netting 38Insulation Supports 87Interior Finish 51Interior Stain 50Ipé Clip 75

JJack Saw 123Japanese Back Saw 123Japanese Hardwood Saw 123Jig Saw 148Jig Saw Blades 171Joiner Plate Biscuits 161Joint Compound 113Joist Cap 70Joist Locator 126

KKnee Pads 104Knife 114Kraft Paper 38

LL Metal 70Lag Bolts 16Lag Screws 16Lag Shields 27Laser Level 126Latches 60, 62, 63, 64, 65Latex Brush 115Level It Deck System 76Leveling Compound 9Levels 120Light Sloped/Skewed U Hangers 87Line Level 120Linemen’s Plier 135Liner, Paint 117Loads 34Locking C-Clamps 132Locks 61, 62, 67, 68Long Nose Pliers 135Lubricating Oil 176Lumber Pencils 110

MMachine Bolts 14Magnetic Drive Guide 167Magnetic Nutdriver 167Malleable Washers 18Marine Finish 51Marking Paint 53Mason Line 109

Mason Mix 185Masonry Bits 125, 163Masonry Blade 175Masonry Cut-Off Disc 2Mastic 8Max Straps 110Maze Plastic-Hed Yellow Cap Nails 33Maze Zinclad Screws 22Measuring Tape 125Membrane 41Membrane Primer 42Metal Closet Rod 144Metal Cut-Off Disc 2Metal Cutting Snip 134Metal Riser 77Metal Stakes 189Metal Stud Screw 24Metal Studs 73Metal Track 73Meters 190, 191Mildew Solution 55Miller Trufit Dowels 36Mineral Spirits 53Miter Box 124Miter Saw 155Miter Clamp Kit 134Moisture Barrier 38, 41Moisture Meters

C505 Concrete Shopline 190C575 Concrete Proline 190Hydro-Thermometer Clock 191L606 Inspector Proline 190L607 Dual Depth Proline 191L609 Shopline 191

Mold Inhibitors 54Moldex Mold Inhibitor 54Mortar Mix/One Step Stucco 186Mud Pans 113

NNail Bag 138Nail Pouch 140Nail Pullers 131Nail Stoppers 89Nailers 180, 181, 183Nails 88

Box 30Bright Duplex/Scaffold 31CC Ringshank 33Common 30Concrete 32Cordless Paslode 30º Framer Nails 28Dritite Cup Head 32Finish 30Furring Stucco Nail 34Galvanized Roofing 33Joist 31Maze Casing Nails 30Maze Hardboard (Box) 31Maze Plastic-Hed Cap Nails 33Maze Roofing 33Maze Spiral Decking Nail 32Maze Splitless Siding 31Power Actuated Pin and Washer

Assembly 34Power Actuated Pins 34Stainless Siding Ring Shank 32Stainless Spiral Decking 32Vinyl Sinker 31Wire Brads 34

Netting 38Nippers 133Non-Shrink Grout/Cement 186Numbers 57Nutdriver 167

OOrbit Palm Sander 150

Duct Tape 111Durock Mesh Tape 112Durock Screws 25Dust Control 35Dust Pans 118

EE-Z Ancor 27Ear Muff 105Ear Plugs 104, 105Ear Protection 105Edge Band Trimmer 142Edge Guard 73Edge Trimmer 142Edgebanding 142Edger 137Elastic Stretch Cords 110Electrical Adapters 192Electrical Cord End 193Electrical Switches 193Electrical Tape 111Electronic Belt Sander 151End Cut 46End Cut Solution 46EPC Post Caps 82Epoxy

Set Pac Epoxy-Tie Adhesive 13Simpson ET 22 Epoxy Adhesive 13

Epoxy Brush 13Epoxy Filler 12Epoxy Gun 13Epoxy Nozzle 13Epoxy Nut 13Epoxy Sealer 12Epoxy Solvent 13Expanding Foam 10Expansion Bolt

Wedge Anchors 27Expansion Shield 27Extend HD Sealant 5Extension Cords 194Ez Stair System 77, 196

FFast Setting Concrete Mix 184Fast-Dry Primer 52Fasteners

Carriage Bolts 15HDG Square Washers 17Hot Dipped Galvanized 17Lag Screws 16Machine (Hex) Bolts 14PHEINOX™ Screws 25

Fastner Bit 168Felt Paper 39Fiberglass Hammers 128Fiberglass Mesh 111Fill Caulk

Dap Fire Stop Sealant 5Fill Stick 11Finish Nails 28

Cordless Paslode Finish Nails 30Finish Screw 75Finish Screws 21Finishing Screws, Stainless Steel 21Fire Retardant 45Fire Retardant Wood Coating 45Fire Stop Sealant 5First Aid Kits 108Fixall 10Flash Light 127Flashing

Aluminum Rolls 70Paper Window Flashing 40Polyflash Window Flashing 40

Flat Corner Irons 56Flat Washers 17Flexible Metal Corner Tape 112Foam 9, 10Foam Insulation 10Foam Paint Brush 115

INDEX

ii

Primer-Sealer Stain-killer 52Production Paper Sheets 1Protection Film 43Protecto-Tak Spray Adhesive 43Pry Bar 132PSA Cloth Discs 2Pump Sprayer 49Putty 11Putty Knife 113

QQuick Grip Bar Clamp 133Quick Square 121Quick Tie 188Quick Tie Tool 188

RR.C. Channel 73Rafter Squares 121Rafter Vents 72Rags 118Rail Bolt Installer 195Rail Bolt Runner 195Rail Bracket Hardware 141Railroad Pick 130Rain Boots 108Rain Suit 107Rapid Load Countersink Set 166Rapid Load Drill Bit Sets 165Rapid Load Hexshank Bits 166Rapid Load Holder 165Rapid Load Masonry Bit 166Rasp, 4-in-1 135Ratan Asphalt Paper 38Ratchet Screw Driver 136Rebar 187Rebar Cutter/Bender 187Rebar Tie Blocks 188Reciprocating Saw 147, 148, 158Reciprocating Saw Blades 171Red Rosin Sheathing Paper 38Redwood Foundation Vents 71Redwood Rectangular Vents 71Resin Fiber Disc 2Respirator 103Respirator Cartridges 103Ring Shank Nail

Maze Hardboard (Box) 31Maze Splitless Siding 31Stainless Siding Ring Shank 32

Ripping Bar 131Ripping Hammer Straight Claw 128Riser 77Rod Hardware 144Roller 116Roller Covers 117Roller Tray Liner 117Roof Cement 7Roof Patch 7Rope 110Rotary Hammer Kit 151Round Mini Vents 72Router 124, 152, 153Router (Plunge Type) 152, 153Router Bits

Carbide ”V” Grooving Bits 173Carbide Beading Bits 173Carbide Classical Bits 174Carbide Core Round Nose Box Bits 173Carbide Corner Rounding Bits 173Carbide Cove Bits 173Carbide Mortising Bits 172Carbide Ogee Bits 174Carbide Portable Tool Laminate Trim

Bits 172Carbide Rabbeting Bits 174Carbide Roman Ogee Bits 174Chamfer Bits 174Dovetail Bits 174Laminate Trim Bits 172Panel Pilot Bits 172

PPad Bolts 62Pad Locks 67Paddle Bit 161Paint

B-I-N Primer-Sealer Stain-Killer/BondCoat 52Bull Eye 1-2-3/Primer-Sealer

Stain-Killer/Bond Coat 52Cabot Finish 49Cabot Problem Solver Primer 47Marking Paint 53Perma-White/Mildrew-Proof InteriorWall & Trim Paint 52Zinsser Spray Primer 53

Paint Brush 115Paint Buckets 119Paint Pourer 119Paint Roller 116Paint Roller Tray 117Paint Scraper 114Paint Thinner 53Painters Tape 111Palm Grip Sander 150Palm Nailers 181Pan Framer Screws 24Pant Tray 117Paper Drywall Corners 72Paper Window Flashing 40Particle Board Screws 20Particle Mask 103Patch Additive 9Pencil 110Penofin 44Percussion Bits 163Phenoseal Adhesive Caulk 5Phillips Insert Bits 26Pick 130Pier Block 186PL 400 Sub-Floor Adhesive 4Plane Tool 127Planer 156Planer Blade 172Planer Kit 154Plaster Paper 38Plaster Patching 10Plastic Putty 10Plastic Sheeting 37, 119Plate Joiner Kit 155Plate Straps 89Plate Washers 17, 189Plates, “T” 56Pliers

Channel Lock 9” Iron Worker Pliers 134

Channel Lock Cutting Plier 135Channel Lock Linemen’s Plier 135Channel Lock Long Nose Pliers 135Channel Lock Tongue and

Groove Pliers 135Plugs 37Plumb Bob 122Plumbers Tape 57Plunge Router 124, 152, 153Pole Sander 112Poly Sheathing 119Poly Sheeting 37Poly Tarps 37Poly Trash Bags 37Poly Window Flashing 40Post Bases 79, 89, 92, 97, 99, 100Post Caps 78, 79, 82, 89, 97, 99, 100, 101Post Caps/Bases 79Post Hole Digger 130Post Standoff 79Pouches

Nylon Nail Pouch 140Nylon Tool Pouch 139Nylon Work Belt 140

Power Actuated Pin & Washer Assembly34Power Actuated Pins 34Power Loads 34

Straight Bits 172Rubber Backing Pad 2Rubber Base Primer 42Rubberized Asphalt Membrane 41

SSafety Fence 108, 189Safety Glasses 104Sand 185Sander

Handvac Drywall Sander 112Pole Sander 113

SandersDewalt DW411K Palm Grip

Sander 150Dewalt DW420 Random Orbit Palm

Sander 150Dewalt DW421 Random Orbit Palm

Sander 150Dewalt DW431 Electronic Belt Sander 151Dewalt DW433 Variable Speed Belt

Sander 151Sanding Back-Up Pad 2Sanding Belts 1Sanding Discs

Hook & Loop Sanding Discs 2Resin Fiber Disc 2

Sanding Sponge 1Sandpaper 1Sash Cord 56Sash Lock 56Sash Rope 57Saw Blades

Carbide Saw Blades 175Dewalt Bi-Metal Deep Cut Hole

Saws 163Dewalt High Performance Masonary

Blade 175Industrial Abrasives Blades 176Industrial Abrasives Depressed-

Center Wheels 176Industrial Dry Cut Diamond Saw

Blades 175Sawhorse 124Saws

Compass Saws 122Coping Saw Blades 122Dewalt DC385K Reciprocating Saw

Kit W/Electric Brake 158Dewalt DW303MK Reciprocating

Saw Kit 147Dewalt DW321K Jig Saw 148Dewalt DW364 Heavy-Duty Circular

Saw 149Dewalt DW378G High Torque Framing Saw 148Dewalt DW705S Miter Saw 155Dewalt DW708 Compound Miter

Saw 155Dewalt DW744S Table Saw 156Dewalt DW935K Cordless Saw

Kit 158Dewalt DWDC390 18v Cordless

Circular Saw 158High Tension Hacksaw 123

Jack Saw 123Japanese Back Saw Rubber Grip 123Japanese Hardwood Saw 123Professional Dovetail Saw 122

Scrapers 114Screw 75Screw cover caps 19Screwdriver

Best Way Tools 4-in-1 136Lutz 15-in-1 Ratchet Screw

Driver 136Screwdriver Kit 157Screws

ACQ PT LUMBER Screws 22Builder Screws 20

Builder Screws Self-Drill/Nibbed Head 21

Concrete Screws 24Drywall Screws, Fine Thread 19Drywall Screws, Self-Drill 19Durock Screws 25Finish Screws 21Finishing Screws, Stainless Steel 21Hex Head Screws 24Maze Zinclad Screws 22Pan Framer Screws 24PHEINOX™ Screws 25Stainless Steal Square Drive 23Tapping Screws, Flat Head Phillips &

Pan Head Phillips Zinc Plated 23Wood Screws, Flat Head Phillips &

Round Head Slotted 23SDS Bits 169Sealants

Dap “230” Sealant 5Dap Fire Stop Sealant 5Dap Kwik Foam Insulating Sealant 9DOW GREAT STUFF® Big Gap Filler

Sealant 10DOW GREAT STUFF® Gaps & Cracks Sealant 10DOW GREAT STUFF® Window &

Door Sealant 10Extend HD 5Lexel 6Protecto Sealant 25XL 7Sikaflex-1a 6

Self Brackets 142, 143, 144Self-Adhesive 111Sheathing Clips 90Sheet Metal Shears 134Sheet Rock Compound 113Sheet Rock Mud Pan 113Sheet Rock Sander 112Shelf Bracket 56, 144Shelving

Closet Tubing 144Clothes Pole Sockets 144Clothes Rod Hardware 144Shelf Bracket with Adjustable Clothes Pole Support 144

Shovel 130Siding Stain 48

Cabot OVT Solid Color Acrylic Stains InUnlimited Custom Colors 48Cabot OVT Solid Color Oil Stains 48Cabot Semi-Solid Stains 48Cabot Semi-Transparent Stains 48

SikkensInterior Clear 50, 51Interior Stain 50Marine Satin Finish 51Srd California 50UV Interior 51Wood Conditioner 51

SiliconesSimpson

A Angles 78A34/A35 Framing Anchors 78AC/LPC Post Caps 78Adjustable Post Bases 79Aluminum Post Standoff 79BC Post Caps/Bases 79CB Column Bases 80CBA Column Bases 80Column Bases 98Column Cap 96CS Coiled Straps 81Deck-Tie Connectors 81Double Shear Joist Hangers 98DS Drywall Stop 82EPC Post Caps 82Floor Beam Levelers 83Foundation Anchors 83H Seismic and Hurricane Ties 84HDA Holdowns 85HH Header Hangers 84HL Heavy Angles and Gussets 85

INDEX

iii

Holddowns 98HU Face Mount Hangers 86HUC Face Mount Hangers 86HUS Face Mount Hangers 86IS Insulation Supports 87LSSU Light Sloped/Skewed U Hangers 87LU Face Mount Hangers 87LUS Face Mount Hangers 88Monkey Paw Anchor Bolt Holders 88Nail Stoppers 89PB Post Bases 89PC Post Caps 89Plate Straps 89Plywood Sheathing Clips 90Predeflected Holdowns 90Regular Post Bases 97Reinforcing and Skewable Angles 90Reinforcing Angle 97Rotated Column End Caps 91SSTB Anchor Bolts 82Staircase Angles 98Standoff Post Bases 92, 97Strap Ties 92SUR/SUL Skewed 45º Hangers 93T and L Strap Ties 93Tension Ties 94Tie Plates 94TS Twist Straps 93U Face Mount Hangers 94Universal Foundation Plate 95Wall Bracing 95WI Wedge 96WT Wedge Form Ties 96

Single Cylinder Deadbol 68Skewable Angles 90Skewed 45º Hangers 93Sledge Hammer 129Snips 134Socket Adapter 167Soffit Continuous Vent 72Soft Face Hammers 129Solid Brass Handrail Brackets 141Solvent 13Sound Channel 73Spackle 9Spade Bit 161Spiral Decking Nail 32Spline Shank Percussion Bit 169Spray Paint 53Springs Clamp 133Square 121Square Drives 26Square Washers 189Stain Blocker 52Stainless screw 75Stains

Deftoil Marine Teakwood Finish 55Jel’d Stains/Wood Kote 54Penofin ultra premium 44

Stair Balusters 197Traditional Straight Aluminum Balusters 197Tuscany Stair Balusters 198

Stair Brackets 77, 196Stair Building Accessories 196

Angle Adaptors 197Dowel Centaur 196EZ-Stair XTRA Spacers 196Pre-Drilled Profiled Rails 197Rail-To-Post Hardware Kit 197Tuscany Lock Bars 198

Stair Building Kits 197EZ-Stair Stair Building Kit 196Seemore 199Traditional Series Kits 197Tuscany Series Kits 198Venetian 199

Stair Edge 125Stair Gauge Set 121Stair Riser 77Staple Gun 136Staples 137

INDEX

iv

Star Bit Tip 24Star Drive Screws 25Steel Wool 116Straight Blade Connectors 193Straight Blade Receptacles 193Strap Hinges 59Strap Ties 92Stratton Bracket 75String 109Stringer 77, 196Stucco 186Stucco Corner 69Stucco Netting 38Stucco Stop 69Stud Sensor 126Suit 107Superbar 132Support Belts 104Sweeping Compound 118Switches 193

TT and L Strap Ties 93T Bevel 121T Hinges 60Table Saw 156Tapcon Screw 24Tape

Caution Tape 108, 111Drywall Tape 111, 112Duct Tape/All Purpose 111Durock Mesh Tape 112Electrical Tape 111Flexible Metal Corner Tape 112Painters Tape 111

Tape Measure 125Tape Measure Holder 138Taping Knife 113Taping Mud 113Tapping Screws 23Tension Ties 94Thickness Planer 156Threaded Rods 18Throw Away Brush 115Tie Wire 188Tie Wire Reel 188Tile Adhesive 9Toggle Bolts 27Toggle Switches 193Tongue and Groove Pliers 135Tool Bag 140Tool Belt

Leather Control Tool Belt 139Nylon Control Tool Belt 139

Torpedo Levels 120Torx Bit 75Transparent Coating 50Trim Head Screw

Finish Screws 21Finishing Screws, Stainless Steel 21

Trowel 138Trowels 137Trufit Drill Bit 36TS Twist Straps 93Twine 109Twisted Nail 32Two Part Epoxy 13

UUrethane Clear Finish 55Utility Knife 114Utility Knife Blades 114

VVapor Barrier

Cedar Breather 39Double Blackraft 38Ratan Asphalt Paper 38Typar HouseWrap 40

Vapor Barrier Tape 40

Vapor Screening 39Vents

Cedar Foundation Vents 71Flat Wood 71Louvered 71Plastic 71Plywood Vent 72Rafter Vents 72Redwood Foundation Vents 71Redwood Rectangular Vents 71Round Mini Vents 72Soffit Continuous Vent 72Stucco 71Stucco Vent 72

Vise Grip Pliers 132Vise Locking Pliers 132

WWall Bracing 95Wall Plates 194Washer Nail 34Washers 17Water Proofing 46Water-Based Primer 52Waterproof Membrane 41Waterproof Titebond II Wood Glue 3Waterproof Titebond III Wood Glue 3WD40 176Wedge Anchors 27Wedge Bolt Hex Heads 26WI Wedge 96Window Scraper 114Window Tape 41Winged Bolts 27Wire Brads 34Wood Bleach 53Wood Boring Bit 164Wood Boring Bits 168Wood Cleaner 47Wood Epoxy

Restor-It Epoxy Filler 12Restor-It Epoxy Sealer 12

Wood File 135Wood Filler

Bondo All Purpose Wood Filler 11Goop-On 11Restor-It Epoxy Filler 12

Wood Finish 55Wood Floats 137Wood Miter Box 124Wood Oil 55Wood Patch 11Wood Preservative 46, 55Wood Preservatives 12

Bora-Care® 12Wood Putty

Color Fill Kit 11Color Putty 11Star Fil-Stik 11Wood Patch 10

Wood RestorationRestor-It Epoxy Filler 12Restor-It Epoxy Sealer 12

Wood Screws 23Wood Shelf Bracket 142Wood Stain 54Wood Veneer 142Wooden Dowel 36Wool, Steel 116Work Belt 140

YYardstick 125

ZZ Bar 69Zip Bit 161Zipwall 35ZMAX 97

Double Shear Joist Hangers 98

Post Caps 97Regular Post Bases 97Reinforcing Angles 97Staircase Angles 98Standoff Post Bases 97

Documents

SUPPL YING THE BA Y AREA WITH THE FINEST BUILDING …cdn.thomasnet.com/ccp/00598598/73854.pdf · suppl ying the ba y area with ... al though we ha ve tried t o appro xima te as cl