Upload
voxuyen
View
217
Download
0
Embed Size (px)
Citation preview
Supplement to notification.: BMWFW-92.221/0740-I/12/2016 HygCen_17025T
Scope of Accreditation of Testing Laboratory (EN ISO/IEC 17025:2005)
HygCen Austria GmbH / (ID No.: 0196)
61 test methods VNo 6316 Page 1 of 10
valid from: 2016-09-20
No. document number 1)
of the standard or SOP
issue
title of the standard or SOP
remarks PvO
2)
1 02-030 2008-05 Testing on the cleaning efficacy of chemo-thermal laundry disinfection procedures in laundries
2 11-001 2016-04 Hygienic examination of surrounding areas in
reprocessing facilities for medical devices and similar
3 16-009 2014-05 Testing of the cleaning efficacy of washer disinfectors
for thermostable & thermolabile medical devices in accordance with the guideline of ÖGSV respectively
DGKH, DGSV and AKI
4 16-010 2014-11 Testing of the cleaning efficacy of washer disinfectors for thermolabile endoscopes in accordance with the guideline of ÖGSV
5 17-008 2012-09 Quantitative determination of free NH2 groups of blood-proteins by the modified OPA method
6 DGHM Chapter 4 2001-09 Standard DGHM methods of testing chemical disinfectants - Chapter 4: Testing of the disinfecting efficacy of chemo-thermal laundry disinfection procedures in laundries (DGHM)
7 DIN 1946-4 2008-12 Ventilation and air conditioning – Part 4: Ventilation in
buildings and rooms of health care
8 DIN 38409-9 1980-07 German standard methods for the examination of water, waste water and sludge; general measures of effects and substances (group H), determination of the settleable matter by volume in water and waste water (H9)
Supplement to notification.: BMWFW-92.221/0740-I/12/2016 HygCen_17025T
Scope of Accreditation of Testing Laboratory (EN ISO/IEC 17025:2005)
HygCen Austria GmbH / (ID No.: 0196)
61 test methods VNo 6316 Page 2 of 10
valid from: 2016-09-20
No. document number 1)
of the standard or SOP
issue
title of the standard or SOP
remarks PvO
2)
9 DIN 38411-8 1982-05 German standard methods for the analysis of water, waste water and sludge; Microbiological methods (group K); Detection of Pseudomonas aeruginosa (K8)
10 EN 1040 2005-12 Chemical disinfectants and antiseptics – Quantitative
suspension test for the evaluation of basic bactericidal
activity of chemical disinfectants and antiseptics – Test
method and requirements (phase 1)
11 EN 1275 2005-12 Chemical disinfectants and antiseptics – Quantitative
suspension test for the evaluation of basic fungicidal or basic yeasticidal activity of chemical disinfectants and antiseptics – Test method and requirements (phase 1)
12 EN 1276 2009-10 Chemical disinfectants and antiseptics –Quantitative
suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in food,
industrial, domestic, and institutional areas – Test
method and requirements (phase 2, step 1)
13 EN 12791 2005-07 Chemical disinfectants and antiseptics – Surgical hand
disinfection – Test method and requirements
(phase 2/step 2)
14 EN 13098 2000-09 Workplace atmosphere - Guidelines for measurement of airborne microorganisms and endotoxin
Supplement to notification.: BMWFW-92.221/0740-I/12/2016 HygCen_17025T
Scope of Accreditation of Testing Laboratory (EN ISO/IEC 17025:2005)
HygCen Austria GmbH / (ID No.: 0196)
61 test methods VNo 6316 Page 3 of 10
valid from: 2016-09-20
No. document number 1)
of the standard or SOP
issue
title of the standard or SOP
remarks PvO
2)
15 EN 13623 2010-09 Chemical disinfectants and antiseptics –Quantitative
suspension test for the evaluation of bactericidal activity against Legionella of chemical disinfectants for
aqueous systems – Test method and requirements
(phase 2, step 1)
16 EN 13624 2013-09 Chemical disinfectants and antiseptics –Quantitative
suspension test for the evaluation of fungicidal activity of chemical disinfection for instruments used in the
medical area – Test method and requirements (phase 2,
step 1)
17 EN 13697 2015-04 Chemical disinfectants and antiseptics – Quantitative
non-porous surface test for the evaluation of bactericidal and/or fungicidal activity of chemical disinfectants used in food, industrial, domestic and
institutional areas – Test method and requirements
without mechanical action (phase 2, step 2)
18 EN 13704 2002-02 Chemical disinfectants – Quantitative suspension test
for the evaluation of sporicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas – Test method and requirements
(phase 2, step 1)
Supplement to notification.: BMWFW-92.221/0740-I/12/2016 HygCen_17025T
Scope of Accreditation of Testing Laboratory (EN ISO/IEC 17025:2005)
HygCen Austria GmbH / (ID No.: 0196)
61 test methods VNo 6316 Page 4 of 10
valid from: 2016-09-20
No. document number 1)
of the standard or SOP
issue
title of the standard or SOP
remarks PvO
2)
19 EN 13727+A2 2015-10 Chemical disinfectants and antiseptics – Quantitative
suspension test for the evaluation of bactericidal activity
in the medical area – Test method and requirements
(phase 2, step 1)
20 EN 14204 2012-11 Chemical disinfectants and antiseptics – Quantitative
suspension test for the evaluation of mycobactericidal activity of chemical disinfectants and antiseptics used in the veterinary area – Test method and requirements
(phase 2, step 1)
21 EN 14347 2005-03 Chemical disinfectants and antiseptics – Basic
sporicidal activity – Test method and requirements
(phase 1)
22 EN 14348 2005-01 Chemical disinfectants and antiseptics – Quantitative
suspension test for the evaluation of mycobactericidal activity of chemical disinfectants in the medical area
including instrument disinfectants – Test method and
requirements (phase 2, step 1)
23 EN 14349 2012-11 Chemical disinfectants and antiseptics – Quantitative
surface test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in the veterinary area on non-porous surfaces without
mechanical action – Test method and requirements
(phase 2, step 2)
Supplement to notification.: BMWFW-92.221/0740-I/12/2016 HygCen_17025T
Scope of Accreditation of Testing Laboratory (EN ISO/IEC 17025:2005)
HygCen Austria GmbH / (ID No.: 0196)
61 test methods VNo 6316 Page 5 of 10
valid from: 2016-09-20
No. document number 1)
of the standard or SOP
issue
title of the standard or SOP
remarks PvO
2)
24 EN 14561 2006-05 Chemical disinfectants and antiseptics – Quantitative
carrier test for the evaluation of bactericidal activity for
instruments used in the medical area – Test method
and requirements (phase 2, step 2)
25 EN 14562 2006-05 Chemical disinfectants and antiseptics – Quantitative
carrier test for the evaluation of fungicidal or yeasticidal
activity for instruments used in the medical area – Test
method and requirements (phase 2, step 2)
26 EN 14563 2008-11 Chemical disinfectants and antiseptics – Quantitative
carrier test for the evaluation of mycobactericidal or tuberculocidal activity of chemical disinfectants used for
instruments in the medical area – Test method and
requirements (phase 2, step 2)
27 EN 1499 2013-04 Chemical disinfectants and antiseptics – Hygienic
handwash – Test method and requirements (phase
2/step 2)
28 EN 1500 2013-04 Chemical disinfectants and antiseptics - Hygienic handrub – Test method and requirements (phase 2/
step 2)
29 EN 1650+A1 2013-05 Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic and
institutional areas – Test method and requirements
(phase 2, step 1)
Supplement to notification.: BMWFW-92.221/0740-I/12/2016 HygCen_17025T
Scope of Accreditation of Testing Laboratory (EN ISO/IEC 17025:2005)
HygCen Austria GmbH / (ID No.: 0196)
61 test methods VNo 6316 Page 6 of 10
valid from: 2016-09-20
No. document number 1)
of the standard or SOP
issue
title of the standard or SOP
remarks PvO
2)
30 EN 1656/AC 2010-08 Chemical disinfectants and antiseptics – Quantitative
suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in the
veterinary area – Test method and requirements (phase
2, step 1)
31 EN 16615 2015-04 Chemical disinfectants and antiseptics - Quantitative test method for the evaluation of bactericidal and yeasticidal activity on non-porous surfaces with mechanical action employing wipes in the medical area (4-field test) - Test method and requirements (phase 2, step 2)
32 EN 16616 2015-08 Chemical disinfectants and antiseptics - Chemical-thermal textile disinfection - Test method and requirements (phase 2, step 2)
33 EN 26461-2 1993-01 Water quality – Detection and enumeration of the
spores of sulfite-reducing anaerobes (clostridia); part 2:
method by membrane filtration (ISO 6461-2:1986)
not for the analysis of drinking water according to TW-VO
34 EN 27888 1993-09 Water quality; determination of electrical conductivity (ISO 7888:1985)
35 EN ISO 10523 2012-02 Water quality - Determination of pH (ISO 10523:2008)
36 EN ISO 11737-1/AC 2009-04 Sterilization of medical devices – Microbiological
methods - Part 1: Determination of a population of micro-organisms on products (ISO 11737-1:2006)
Supplement to notification.: BMWFW-92.221/0740-I/12/2016 HygCen_17025T
Scope of Accreditation of Testing Laboratory (EN ISO/IEC 17025:2005)
HygCen Austria GmbH / (ID No.: 0196)
61 test methods VNo 6316 Page 7 of 10
valid from: 2016-09-20
No. document number 1)
of the standard or SOP
issue
title of the standard or SOP
remarks PvO
2)
37 EN ISO 11737-2 2009-11 Sterilization of medical devices – Microbiological methods - Part 2: Tests of sterility performed in the definition, validation and maintenance of the sterilization process (ISO 11737-2:2009)
38 EN ISO 16266 2008-02 Water quality – Detection and enumeration of Pseudomonas aeruginosa by membrane filtration (ISO 16266:2006)
39 EN ISO 19458 2006-08 Water quality – Sampling for microbiological analysis (ISO 19458:2006)
40 EN ISO 20743 2013-07 Textiles - Determination of the antibacterial activity of textile products (ISO 20743:2013)
41 EN ISO 6222 1999-05 Water quality - Enumeration of culturable micro-organisms - Colony count by inoculation in a nutrient agar culture medium (ISO 6222:1999)
42 EN ISO 7393-2 2000-01 Water quality - Determination of the free chlorine and total chlorine – Part 2: Colorimetric method using N,N-diethyl-1,4-phenylendiamine for routine control purpose (ISO 7393-2:1985)
43 EN ISO 7899-2 2000-04 Water quality – Detection and enumeration of intestinal enterococci - Part 2: Membrane filtration method (ISO 7899-2:2000)
44 EN ISO 9308-1 2014-09 Water quality - Enumeration of Escherichia coli and coliform bacteria - Part 1: Membrane filtration method for waters with low bacterial background flora (ISO 9308-1:2014)
Supplement to notification.: BMWFW-92.221/0740-I/12/2016 HygCen_17025T
Scope of Accreditation of Testing Laboratory (EN ISO/IEC 17025:2005)
HygCen Austria GmbH / (ID No.: 0196)
61 test methods VNo 6316 Page 8 of 10
valid from: 2016-09-20
No. document number 1)
of the standard or SOP
issue
title of the standard or SOP
remarks PvO
2)
45 Eur.Ph. 2.6.1 2012-01 Testing for microbial contamination in sterile products: enumeration of total, viable, aerobe and anaerobe microorganisms
46 ISO 11731-2 2004-05 Water quality – Detection and enumeration of
Legionella – Part 2: Direct membrane filtration method
for waters with low bacterial counts
47 ISO 5667-4 2016-06 Water quality — Sampling - Part 4: Guidance on
sampling from lakes, natural and man-made
48 ISO 5667-5 2006-04 Water quality — Sampling - Part 5: Guidance on
sampling of drinking water from treatment works and piped distribution systems
49 ISO/TS 15883-5 2005-11 Washer-disinfectors - Part 5: Test soils and methods for demonstrating cleaning efficacy
50 JIS L 1902 2008-10 Testing for antibacterial activity and efficacy on textile products
Chapter 3
51 JIS Z 2801 2012-05 Antimicrobial products-Test for antimicrobial activity and efficacy
Chapter 5
Supplement to notification.: BMWFW-92.221/0740-I/12/2016 HygCen_17025T
Scope of Accreditation of Testing Laboratory (EN ISO/IEC 17025:2005)
HygCen Austria GmbH / (ID No.: 0196)
61 test methods VNo 6316 Page 9 of 10
valid from: 2016-09-20
No. document number 1)
of the standard or SOP
issue
title of the standard or SOP
remarks PvO
2)
52 OENORM M 6230 2015-06 Bathing waters - Requirements for water quality, analysis and assessment
Limited on the sampling
53 OENORM M 6616 1994-03 Water analysis - Determination of temperature
54 OENORM M 6620 2012-12 Water analysis – Methods and result information to the
description of the external quality of a water test
55 prEN 1657 2014-04 Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in the veterinary area - Test method and requirements (phase 2, step 1)
56 VAH method 14 2015-04 Requirements and methods to the VAH- certified chemical disinfection methods: surface disinfection
without mechanics – practical test (method 14)
57 VAH method 15 2015-04 Requirements and methods to the VAH- certified chemical disinfection methods: chemical/ chemo- thermal disinfection of instruments - practical quantitative germ carrier test (method 15)
58 VAH method 17 2015-04 Requirements and methods to the VAH- certified chemical disinfection methods: chemo- thermal laundry
disinfection – single bath method (practical test)
(method 17)
Supplement to notification.: BMWFW-92.221/0740-I/12/2016 HygCen_17025T
Scope of Accreditation of Testing Laboratory (EN ISO/IEC 17025:2005)
HygCen Austria GmbH / (ID No.: 0196)
61 test methods VNo 6316 Page 10 of 10
valid from: 2016-09-20
No. document number 1)
of the standard or SOP
issue
title of the standard or SOP
remarks PvO
2)
59 VAH method 7 2015-04 Requirements and methods to the VAH- certified chemical disinfection methods: determination of the bacteriostatic and levurostatic effectiveness as well as suitable neutralizer (method 7)
60 VAH method 8 2015-04 Requirements and methods to the VAH- certified chemical disinfection methods: determination of the bactericidal and yeastidical effectiveness in a qualitative suspension test
61 VAH method 9 2015-04 Requirements and methods to the VAH- certified chemical disinfection methods: determination of the bactericidal, yeastidical, fungicidal, tuberculocidal or mycobactericidal effectiveness in a quantitative suspension test
1) Any amendments of standards apply as with accredited, provided that there is no new conformity assessment procedures are defined. Austrian laws and regulations as well as EU regulations are accredited in the applicable version, unless otherwise indicated.
2) PvO: test can - if selected - also be done locally.
Supplement to notification GZ.: BMWFW-92.251/0417-I/12/2016 HygCen_17020
Scope of Accreditation of inspection body (EN ISO/IEC 17020:2012)
HygCen Austria GmbH / (ID No.: 0196)
28 inspection methods VNo 6317 Page 1 of 7
valid from: 2016-09-20
No. document number 1)
of the standard or SOP
date of issue
title of the standard or SOP product / category
(remarks)
conformity assessment procedures / module
1 21-010 2015-11 Hygiene Management System in laundries
Site inspection, documentation review, environmental investigation, air technology systems, thermoelectric examination, examination of process- and program parameters, testing of cleaning and disinfection
2 21-011 2014-04 Hygiene Management System - reprocessing of textile operating room materials - examination of processes and procedures
Site inspection, documentation review, environmental investigation, air technology systems, determination of a population of microorganisms on products, thermoelectric examination, examination of process- and program parameters, sterility testing of operation materials used as medical devices for patients, clinic staff and devices,
3 21-055 2014-05 Hygienic assessment of IVF institutes
Site inspection, documentation review, environmental investigation
4 21-070 2014-06 Hygienic examination of reprocessing of dishwashers
documentation review, testing of cleaning and disinfection, thermoelectric examination, impression investigation, examination of process- and program parameters
Supplement to notification GZ.: BMWFW-92.251/0417-I/12/2016 HygCen_17020
Scope of Accreditation of inspection body (EN ISO/IEC 17020:2012)
HygCen Austria GmbH / (ID No.: 0196)
28 inspection methods VNo 6317 Page 2 of 7
valid from: 2016-09-20
No. document number 1)
of the standard or SOP
date of issue
title of the standard or SOP product / category
(remarks)
conformity assessment procedures / module
5 AK KAB- Arbeitskreis
Käfigaufbereitung
2016-01 Cage processing in animal facilities (5th Edition) documentation review, thermoelectric examination, examination of process- and program parameters, testing of cleaning and disinfection, water analysis
Inspection acc. chapter 7
6 BGBl. 04/2002 2002-04 Hygiene requirements to the structural and functional design and apparative equipment of endoscopy units, RKI
Site inspection, documentation review,
7 BGBl. II No. 262/2008 2008-07 Regulation of the Minister of Economy and Labour on exercise rules for foot care, cosmetics and massage by professionals
Site inspection, documentation review, environmental investigation, determination of a population of microorganisms on products, sterility of products, thermoelectric examination, biological indicators
§4, inspection activity to create
an inspection report
8 BGBl. II No. 321/2012 2012-09 Regulation of the Minister of Health on hygiene in bathrooms, hot tub pools, (whirlpools), saunas, hot air and steam baths as well as small swimming ponds (Pool hygiene regulation 2012 – BhygV 2012)
Pools acc. § § 42 and 43; warm bubble bath (whirlpools) acc. §§ 57 and 58; excluding chemical parameters in the laboratory
inspections (to be obtained water hygienic certificates, which the operator has to commission in
accordance with § 14(2) ff
BHygG)
Supplement to notification GZ.: BMWFW-92.251/0417-I/12/2016 HygCen_17020
Scope of Accreditation of inspection body (EN ISO/IEC 17020:2012)
HygCen Austria GmbH / (ID No.: 0196)
28 inspection methods VNo 6317 Page 3 of 7
valid from: 2016-09-20
No. document number 1)
of the standard or SOP
date of issue
title of the standard or SOP product / category
(remarks)
conformity assessment procedures / module
9 BGesBl. 07/1995 1995-07 Hygiene requirements to laundry and washing procedures and conditions for granting of laundry reprocessing to commercial laundries; RKI
Site inspection, documentation review, environmental investigation, thermoelectric examination, examination of process- and program parameters, testing of cleaning and disinfection
10 EN 13060 2014-12 Small steam sterilizers documentation review, thermoelectric examination, biological indicators
11 EN 14180 2014-05 Sterilizers for medical purposes – Low
temperature steam and formaldehyde sterilizers
– Requirements and testing
documentation review, thermoelectric examination, biological indicators, chemical indicators, desorption review
12 EN 16442 2015-03 Controlled environment storage cabinet for processed thermolabile endoscopes
documentation review, thermoelectric examination, examination of process- and program parameters, testing of cleaning and disinfection, water analysis
13 EN 285 2015-12 Sterilization – Steam sterilizers – Large
sterilizers
documentation review, thermoelectric examination, measurement of inert gas, water analysis, biological indicators
14 EN ISO 11135 2014-07 Sterilization of health care products – Ethylene
oxide – Requirements for the development,
validation and routine control of a sterilization process for medical devices (ISO 11135:2014)
documentation review, thermoelectric examination, biological indicators, chemical indicators, regulation for residual gas
Supplement to notification GZ.: BMWFW-92.251/0417-I/12/2016 HygCen_17020
Scope of Accreditation of inspection body (EN ISO/IEC 17020:2012)
HygCen Austria GmbH / (ID No.: 0196)
28 inspection methods VNo 6317 Page 4 of 7
valid from: 2016-09-20
No. document number 1)
of the standard or SOP
date of issue
title of the standard or SOP product / category
(remarks)
conformity assessment procedures / module
15 EN ISO 14937 2009-10 Sterilization of health care products – General
requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009)
among others for hydrogen-peroxide / plasma-method in use; Documentation review, thermoelectric examination, biological indicators, chemical indicators, microbiological analysis
16 EN ISO 15883-1/A1 2014-07 Washer-disinfectors - Part 1: General requirements, definitions and tests
(ISO 15883-1:2006 + Amd 1:2014)
Documentation review, thermoelectric examination, examination of process- and program parameters, inspection of cleaning and disinfection, water analysis
17 EN ISO 15883-2 2009-06 Washer-disinfectors - Part 2: Requirements and tests for washer-disinfectors employing thermal disinfection for surgical instruments, anaesthetic equipment, bowls, dishes, receivers, utensils, glassware, etc. (ISO 15883-2:2006)
documentation review, thermoelectric examination, examination of process- and program parameters, testing of cleaning and disinfection, water analysis
18 EN ISO 15883-3 2009-06 Washer-disinfectors - Part 3: Requirements and tests for washer-disinfectors employing thermal disinfection for human waste containers (ISO15883-3:2006)
documentation review, thermoelectric examination, examination of process- and program parameters, testing of cleaning and disinfection, water analysis
19 EN ISO 15883-4 2009-06 Washer-disinfectors - Part 4: Requirements and tests for washer-disinfectors employing chemical disinfection for thermo-labile endoscopes
(ISO 15883-4:2008)
documentation review, thermoelectric examination, examination of process- and program parameters, testing of cleaning and disinfection, water analysis
Supplement to notification GZ.: BMWFW-92.251/0417-I/12/2016 HygCen_17020
Scope of Accreditation of inspection body (EN ISO/IEC 17020:2012)
HygCen Austria GmbH / (ID No.: 0196)
28 inspection methods VNo 6317 Page 5 of 7
valid from: 2016-09-20
No. document number 1)
of the standard or SOP
date of issue
title of the standard or SOP product / category
(remarks)
conformity assessment procedures / module
20 EN ISO 15883-6 2015-08 Washer-disinfectors – Part 6: Requirements and
tests for washer-disinfectors employing thermal disinfection for non-invasive, non-critical medical devices and healthcare equipment
(ISO 15883-6:2011);
Documentation review, thermoelectric examination, examination of process- and program parameters, testing of cleaning and disinfection, water analysis
21 EN ISO 15883-7 2016-03 Washer-disinfectors – Part 7: Requirements and
tests for washer-disinfectors employing chemical disinfection for non-invasive, non-critical thermolabile medical devices and healthcare equipment (ISO 15883-7:2016)
Documentation review, thermoelectric examination, examination of process- and program parameters, testing of cleaning and disinfection, water analysis
22 EN ISO 17664 2004-03 Sterilization of medical devices – Information to
be provided by the manufacturer for the processing of resterilizable medical devices (ISO 17664:2004)
Documentation review, inspection of cleaning and disinfection, sterilisation and drying
23 EN ISO 17665-1 2006-08 Sterilization of health care products – Moist heat
– Part 1: Requirements for the development,
validation and routine control of a sterilization process for medical devices
(ISO 17665-1:2006)
Documentation review, thermoelectric examination, water analysis
Supplement to notification GZ.: BMWFW-92.251/0417-I/12/2016 HygCen_17020
Scope of Accreditation of inspection body (EN ISO/IEC 17020:2012)
HygCen Austria GmbH / (ID No.: 0196)
28 inspection methods VNo 6317 Page 6 of 7
valid from: 2016-09-20
No. document number 1)
of the standard or SOP
date of issue
title of the standard or SOP product / category
(remarks)
conformity assessment procedures / module
24 KRINKO/BfArM - Richtlinie: Empfehlung der Kommission für Krankenhaushygiene und Infektionsprävention (KRINKO) beim Robert Koch- Institut (RKI) und des Bundesinstitutes für Arzneimittel und Medizinprodukte (BfArM)
2012-10 Requirements to hygiene in the reprocessing of medical devices
Only the parts concerning the reprocessing of medical devices; Site inspection, documentation review, environmental investigation, air technical systems, determination of a population of microorganisms on products, sterility of products, thermoelectric examination, examination of process- and program parameters, sterility testing of operation materials used as medical devices for patients, clinic staff and devices,
25 OENORM B 5019 2011-05 Hygienic aspects of the planning, construction, operation, maintenance, surveillance and rehabilitation of central heating installations for drinking water
Site inspection, documentation review, sampling, water analysis
Inspection acc. chapter 6
26 OENORM H 6020 2015-03 Ventilation and air condition plants for locations
for medical use – Design, construction,
operation, maintenance, technical and hygienic inspections
5.2 and H 6020-2, table 1
Site inspection, documentation review, particle measurement, airborne germs measurement, impression investigation, microbiological analysis of liquid mediums
Inspection acc. chapter 5.2 and OENORM H 6020-2, table 1
Supplement to notification GZ.: BMWFW-92.251/0417-I/12/2016 HygCen_17020
Scope of Accreditation of inspection body (EN ISO/IEC 17020:2012)
HygCen Austria GmbH / (ID No.: 0196)
28 inspection methods VNo 6317 Page 7 of 7
valid from: 2016-09-20
No. document number 1)
of the standard or SOP
date of issue
title of the standard or SOP product / category
(remarks)
conformity assessment procedures / module
27 OENORM M 5874 2009-07 Water intended for human consumption –
Instructions for the activity of inspection bodies
28 VDI 6022 Blatt 1 2011-07 Ventilation and indoor-air quality - Hygiene requirements for ventilation and air-conditioning systems and units (VDI Ventilation Code of Practice)
Site inspection, documentation review, particle measurement, airborne germs measurement, impression investigation, microbiological analysis of liquid mediums
Inspection acc. to part 5.3;
1) Any amendments of standards apply as with accredited, provided that there is no new conformity assessment procedures are defined. Austrian laws and regulations as well as EU regulations are accredited in the applicable version, unless otherwise indicate.