Embed Size (px)
Citation preview
![Page 1: SUSPENSION SYSTEMv2acgiwood.com/sites/ · Suspension Series 4 [SS4] suspends from backers that slide over the grid and provide a ˛⁄˙” reveal between each panel. The panels are](https://reader035.pdfslide.net/reader035/viewer/2022071004/5fc1674662fbf2715a7ee234/html5/thumbnails/1.jpg)
SUSPENSION SYSTEMSUSPENSION
[email protected] Components Group, Inc. (417) 869-6777
v2.1
Series 4 With ACGI Suspension Systems panels can be attached to wallsas well as lay into a standard HD T-Grid ceiling mounting system.Panels are available in standard and custom sizes to meet particulardesign requirements. Panels have a solid reflective surface unless perforations are specified to control sound absorption. Acoustic insulation can be added behind panels for greater NRC performance. ACGI attaches acoustic fabric to the back of perforated panels to increase acoustical absorption. Special surface patterns and logos can also be incorporated into the manufacture of the panels.
Suspension Series 4 [SS4] suspends from backers that slide over the grid and provide a ⁄” reveal between each panel. The panels are easily removed for access.
Suspension
ACGI Safety Clips (�eld installed)
![Page 2: SUSPENSION SYSTEMv2acgiwood.com/sites/ · Suspension Series 4 [SS4] suspends from backers that slide over the grid and provide a ˛⁄˙” reveal between each panel. The panels are](https://reader035.pdfslide.net/reader035/viewer/2022071004/5fc1674662fbf2715a7ee234/html5/thumbnails/2.jpg)
[email protected]@acgiwood.com
Architectural Components Group, Inc. (417) 869-6777
v2.1
© 2013 Architectural Components Group, Inc. All Rights Reserved. Information provided is accurate at time of printing. ACGI reserves the right to modify any materials without further noti�cation. All product applications are suggestion only. Always conform with local building codes and safety conditions. ACGI does not accept responsibility for the misuse or improper installation of products. Visit ACGIwood.com for more details. Printed in U.S.A.
How To Spec Slotted Patterns...
Parallel Offset
NRC Values
(Contact ACGI for details.)
Slot Size
Series
SS4-2424-C-S832-32-O
Alignment (Parallel or O�set)
Spacing(Horizontal & Vertical)
Width
Height
¾" PanelThickness
What It Means... Suspension Series 4 24" x 24" panel, ¾" thick, and 8mm x
32mm slots spaced 32mm O.C. vertically and horizontally with offset alignment.
v2.1
Series
SS4-2424-C-MP.94-P
Alignment (Parallel or O�set)
MicroPerf (0.9mm perforations)
Width
Height
¾" PanelThickness
How To Spec MicroPerf Patterns...
Parallel Offset
NRC Values
0.9mm O.C. perforated panel(E 400 mounting) 0.70 (E 400 mounting, acoustical insulation) 0.85
0.9mm O.C. perforated panel(F-6 wall) 0.45 (F-6 wall, acoustical insulation) 0.80
What It Means... Suspension Series 4 24" x 24" panel, ¾" thick, and 0.9mm
perforations spaced 4mm O.C. vertically and horizontally with parallel alignment.
LEED® CREDITMR 4.1, MR 4.2, MR 7, EQ 4.4
SPECIES + STAINSFor this product ACGI can source any commercially available veneer or thermally-fused laminate and apply any standard, color-matched or custom finish. Contact us for details.
FIRE RATINGSolid wood finishes and both veneer finishes and cores can be provided with a Class A fire rating [ASTM-E84].
DELIVERY, STORAGE & HANDLINGMaterial must be stored and installed only in secured ambient environment (humidity range 25%–55%, temperature not to exceed 86°F). All windows, doors and wet-work must be complete before installation. Handle carefully to avoid damaging.
WARRANTYAll materials supplied by ACGI are guaranteed against manufacturing defects for one year. Wood stains and colorings can vary over time due to job site conditions and are therefore excluded from this warranty. The contractor shall warrant for one year all work from final acceptance of completed work.
Suspension Series 4 — Speci�cation Information
Product No. Reveal Suspension Width Length Typical Thickness Panel Weight
SS4-####-C 3⁄8" min. 15⁄16 HD T-Grid Up to 2' Up to 8' ¾" 3 lbs/sq. ft.
How To Spec Perforated Patterns...
What It Means... Suspension Series 4 24" x 24" panel, ¾" thick, and 8mm
perforations spaced 32mm O.C. vertically and horizontally with parallel alignment.
Parallel Offset
Perforation Size
Series
SS4-2424-C-P832-P
Alignment (Parallel or O�set)
Spacing(Horizontal & Vertical)
Width
Height
¾" PanelThickness
NRC Values
32mm O.C. perforated panel(E 400 mounting) 0.30 (E 400 mounting, 1" acoustical blanket) 0.40
32/16mm O.C. perforated panel(E 400 mounting) 0.55 (E 400 mounting, 1" acoustical blanket) 0.65
16mm O.C. perforated panel(E 400 mounting) 0.70 (E 400 mounting, 1" acoustical blanket) 0.75 (E 400 mounting, 2" acoustical blanket) 0.80
