Embed Size (px)
Citation preview
CH1
CH2
CH3
CH4 CH5
CH6
CH7
L
N
E
PL
Wh
iteb
oard
WindowsWhiteboard Switch
SW1 SW2 SW3
If using 2 PIRs instead of a microwave detector, the PIR closest to the window will reference LUX and should be connected to Input 1.
Switch inputs
Detector/scene plate inputs
CH1
CH2
CH3
CH4 CH5
CH6
CH7
L
N
E
PL
Wh
iteb
oard
WindowsWhiteboard Switch
SW1 SW2 SW3
If using 2 PIRs instead of a microwave detector, the PIR closest to the window will reference LUX and should be connected to Input 1.
Switch inputs
Detector/scene plate inputs
SW1 SW2 SW3 White- board
Switch
Emergency Lighting
Test
SW1 SW2 SW3 White- board
Switch
Emergency Lighting
Test
Each switch operates luminaires within the same colour dashed line.
Switches and dims the whiteboard luminaires independently within the same colour dashed line.
Luminaires daylight link – graduated dimming from window row.
Upon exiting the space any luminaires left on will switch off after an adjustable time out period.
Dimmable Luminaires
Each switch operates luminaires within the same colour dashed line.
Switches and dims the whiteboard luminaires independently within the same colour dashed line.
Luminaires daylight link – graduated dimming from window row.
Upon exiting the space any luminaires left on will switch off after an adjustable time out period.
Dimmable Luminaires
Config 10 – Classroom with 3 rows of luminaires working in absence mode. Whiteboard on channels 1, 2 and 3.
Config 11 – Classroom with 3 rows of luminaires working in absence mode. Whiteboard on channel 2.
CH1
CH2
CH3
CH6
CH7
L
N
E
PL
Windows
Whiteboard
CH4CH5
Whiteboard SwitchSW1 SW2 SW3
Switch inputs
Config 13 – Classroom with 3 rows of luminaires working in absence mode. Whiteboard on channel 5.
Detector/scene plate inputs
CH1
CH2
CH3
CH4 CH5
CH6
CH7
L
N
E
PL
Windows
Whiteboard Whiteboard SwitchSW1 SW2 SW3
Switch inputs
Config 12 – Classroom with 3 rows of luminaires working in absence mode. Whiteboard on channels 1, 4 and 5.
Detector/scene plate inputs
If using 2 PIRs instead of a microwave detector, the PIR closest to the window will reference LUX and should be connected to Input 1.
If using 2 PIRs instead of a microwave detector, the PIR closest to the window will reference LUX and should be connected to Input 1.
Each switch operates luminaires within the same colour dashed line.
Switches and dims the whiteboard luminaires independently within the same colour dashed line.
Luminaires daylight link – graduated dimming from window row.
Upon exiting the space any luminaires left on will switch off after an adjustable time out period.
Dimmable Luminaires
Each switch operates luminaires within the same colour dashed line.
Switches and dims the whiteboard luminaires independently within the same colour dashed line.
Luminaires daylight link – graduated dimming from window row.
Upon exiting the space any luminaires left on will switch off after an adjustable time out period.
Dimmable Luminaires
CH1
CH2
CH3
CH4 CH5
CH6
CH7
L
N
E
PL
Windows
Wh
iteb
oard
Whiteboard Switch
Main Switch
Switch inputs
Config 14 – Classroom with luminaires working in absence mode. Whiteboard on channels 1, 2 and 3.
Detector/scene plate inputs
CH1
CH2
CH3
CH4 CH5
CH6
CH7
L
N
E
PL
Windows
Wh
iteb
oard
Whiteboard Switch
Main Switch
Switch inputs
Config 15 – Classroom with luminaires working in absence mode. Whiteboard on channel 2.
Detector/scene plate inputs
If using 2 PIRs instead of a microwave detector, the PIR closest to the window will reference LUX and should be connected to Input 1.
If using 2 PIRs instead of a microwave detector, the PIR closest to the window will reference LUX and should be connected to Input 1.
Main Switch
White- board
Switch
Emergency Lighting
Test
Main Switch
White- board
Switch
Emergency Lighting
Test
Each switch operates luminaires within the same colour dashed line.
Switches and dims the whiteboard luminaires independently within the same colour dashed line.
Luminaires daylight link – graduated dimming from window row.
Upon exiting the space any luminaires left on will switch off after an adjustable time out period.
Dimmable Luminaires
Switch operates luminaires within the same colour dashed line.
Switches and dims the whiteboard luminaires independently within the same colour dashed line.
Luminaires daylight link – graduated dimming from window row.
Upon exiting the space any luminaires left on will switch off after an adjustable time out period.
Dimmable Luminaires
CH1
CH2
CH3
CH4 CH5
CH6
CH7
L
N
E
PL
Windows
WhiteboardWhiteboard SwitchMain Switch
Switch inputs
Config 16 – Classroom with luminaires working in absence mode. Whiteboard on channels 1, 4 and 5.
Detector/scene plate inputs
CH1
CH2
CH3
CH4
CH6
CH7
L
N
E
PL
Windows
Whiteboard
CH5
Whiteboard SwitchMain Switch
Switch inputs
Config 17 – Classroom with luminaires working in absence mode. Whiteboard on channel 5.
Detector/scene plate inputs
If using 2 PIRs instead of a microwave detector, the PIR closest to the window will reference LUX and should be connected to Input 1.
If using 2 PIRs instead of a microwave detector, the PIR closest to the window will reference LUX and should be connected to Input 1.
Main Switch
White- board
Switch
Emergency Lighting
Test
Main Switch
White- board
Switch
Emergency Lighting
Test
Switch operates luminaires within the same colour dashed line.
Switches and dims the whiteboard luminaires independently within the same colour dashed line.
Luminaires daylight link – graduated dimming from window row.
Upon exiting the space any luminaires left on will switch off after an adjustable time out period.
Dimmable Luminaires
Switch operates luminaires within the same colour dashed line.
Switches and dims the whiteboard luminaires independently within the same colour dashed line.
Luminaires daylight link – graduated dimming from window row.
Upon exiting the space any luminaires left on will switch off after an adjustable time out period.
Dimmable Luminaires
SW1 SW2 SW3 Whiteboard Switch
Emergency Lighting
Test
CH1
CH2
CH3
CH4 CH5
CH6
CH7
L
N
E
PL
Wh
iteb
oard
WindowsWhiteboard Switch
SW1 SW2 SW3
If using 2 PIRs instead of a microwave detector, the PIR closest to the window will reference LUX and should be connected to Input 1.
Switch inputs
Config 19 – Classroom with 3 rows of luminaires working in absence mode. Whiteboard on channel 2.
Detector/scene plate inputs
SW1 SW2 SW3 Whiteboard Switch
Emergency Lighting
Test
CH1
CH2
CH3
CH4 CH5
CH6
CH7
L
N
E
PL
Wh
iteb
oard
WindowsWhiteboard Switch
SW1 SW2 SW3
If using 2 PIRs instead of a microwave detector, the PIR closest to the window will reference LUX and should be connected to Input 1.
Switch inputs
Config 18 – Classroom with 3 rows of luminaires working in absence mode. Whiteboard on channels 1, 2 and 3.
Detector/scene plate inputs
Each switch operates luminaires within the same colour dashed line.
Switches and dims the whiteboard luminaires independently within the same colour dashed line.
Luminaires daylight link – window row only dimmable
Upon exiting the space any luminaires left on will switch off after an adjustable time out period.
Dimmable Luminaires
Each switch operates luminaires within the same colour dashed line.
Switches and dims the whiteboard luminaires independently within the same colour dashed line.
Luminaires daylight link – window row only dimmable
Upon exiting the space any luminaires left on will switch off after an adjustable time out period.
Dimmable Luminaires
SW1 SW2 SW3 Whiteboard Switch
Emergency Lighting
Test
CH1
CH2
CH3
CH6
CH7
L
N
E
PL
Windows
Whiteboard
CH4CH5
Whiteboard SwitchSW1 SW2 SW3
If using 2 PIRs instead of a microwave detector, the PIR closest to the window will reference LUX and should be connected to Input 1.
Switch inputs
Config 21 – Classroom with 3 rows of luminaires working in absence mode. Whiteboard on channel 5.
Detector/scene plate inputs
SW1 SW2 SW3 Whiteboard Switch
Emergency Lighting
Test
CH1
CH2
CH3
CH4 CH5
CH6
CH7
L
N
E
PL
Windows
Whiteboard Whiteboard SwitchSW1 SW2 SW3
If using 2 PIRs instead of a microwave detector, the PIR closest to the window will reference LUX and should be connected to Input 1.
Switch inputs
Config 20 – Classroom with 3 rows of luminaires working in absence mode. Whiteboard on channels 1, 4 and 5.
Detector/scene plate inputs
Each switch operates luminaires within the same colour dashed line.
Switches and dims the whiteboard luminaires independently within the same colour dashed line.
Luminaires daylight link – window row only dimmable
Upon exiting the space any luminaires left on will switch off after an adjustable time out period.
Dimmable Luminaires
Each switch operates luminaires within the same colour dashed line.
Switches and dims the whiteboard luminaires independently within the same colour dashed line.
Luminaires daylight link – window row only dimmable
Upon exiting the space any luminaires left on will switch off after an adjustable time out period.
Dimmable Luminaires
CH1
CH2
CH3
CH4 CH5
CH6
CH7
L
N
E
PL
Windows
Wh
iteb
oard
Whiteboard Switch
Main Switch
If using 2 PIRs instead of a microwave detector, the PIR closest to the window will reference LUX and should be connected to Input 1.
Switch inputs
Config 22 – Classroom with luminaires working in absence mode. Whiteboard on channels 1, 2 and 3.
Detector/scene plate inputs
CH1
CH2
CH3
CH4 CH5
CH6
CH7
L
N
E
PL
Windows
Wh
iteb
oard
Whiteboard Switch
Main Switch
If using 2 PIRs instead of a microwave detector, the PIR closest to the window will reference LUX and should be connected to Input 1.
Switch inputs
Config 23 – Classroom with luminaires working in absence mode. Whiteboard on channel 2.
Detector/scene plate inputs
Main Switch
White- board
Switch
Emergency Lighting
Test
Main Switch
White- board
Switch
Emergency Lighting
Test
Switch operates luminaires within the same colour dashed line.
Switches and dims the whiteboard luminaires independently within the same colour dashed line.
Luminaires daylight link – window row only dimmable
Upon exiting the space any luminaires left on will switch off after an adjustable time out period.
Dimmable Luminaires
Switch operates luminaires within the same colour dashed line.
Switches and dims the whiteboard luminaires independently within the same colour dashed line.
Luminaires daylight link – window row only dimmable
Upon exiting the space any luminaires left on will switch off after an adjustable time out period.
Dimmable Luminaires
CH1
CH2
CH3
CH4 CH5
CH6
CH7
L
N
E
PL
Windows
WhiteboardWhiteboard SwitchMain Switch
If using 2 PIRs instead of a microwave detector, the PIR closest to the window will reference LUX and should be connected to Input 1.
Switch inputs
Config 24 – Classroom with luminaires working in absence mode. Whiteboard on channels 1, 4 and 5
Detector/scene plate inputs
CH1
CH2
CH3
CH4
CH6
CH7
L
N
E
PL
Windows
Whiteboard
CH5
Whiteboard SwitchMain Switch
If using 2 PIRs instead of a microwave detector, the PIR closest to the window will reference LUX and should be connected to Input 1.
Switch inputs
Config 25 – Classroom with 3 rows of luminaires working in absence mode. Whiteboard on channel 5.
Detector/scene plate inputs
Main Switch
White- board
Switch
Emergency Lighting
Test
Main Switch
White- board
Switch
Emergency Lighting
Test
Switch operates luminaires within the same colour dashed line.
Switches and dims the whiteboard luminaires independently within the same colour dashed line.
Luminaires daylight link – window row only dimmable
Upon exiting the space any luminaires left on will switch off after an adjustable time out period.
Dimmable Luminaires
Switch operates luminaires within the same colour dashed line.
Switches and dims the whiteboard luminaires independently within the same colour dashed line.
Luminaires daylight link – window row only dimmable
Upon exiting the space any luminaires left on will switch off after an adjustable time out period.
Dimmable Luminaires
SW1 SW2 SW3 Whiteboard Switch
Emergency Lighting
Test
CH1
CH2
CH3
CH4 CH5
CH6
CH7
L
N
E
PL
Wh
iteb
oard
WindowsWhiteboard Switch
SW1 SW2 SW3
If using 2 PIRs instead of a microwave detector, the PIR closest to the window will reference LUX and should be connected to Input 1.
Switch inputs
Config 27 – Classroom with 3 rows of luminaires working in absence mode. Whiteboard on channel 2.
Detector/scene plate inputs
SW1 SW2 SW3 Whiteboard Switch
Emergency Lighting
Test
CH1
CH2
CH3
CH4 CH5
CH6
CH7
L
N
E
PL
Wh
iteb
oard
WindowsWhiteboard Switch
SW1 SW2 SW3
If using 2 PIRs instead of a microwave detector, the PIR closest to the window will reference LUX and should be connected to Input 1.
Switch inputs
Config 26 – Classroom with 3 rows of luminaires working in absence mode. Whiteboard on channels 1, 2 and 3.
Detector/scene plate inputs
Each switch operates luminaires within the same colour dashed line.
Switches and dims the whiteboard luminaires independently within the same colour dashed line.
Luminaires daylight link – window row only daylight switching.
Upon exiting the space any luminaires left on will switch off after an adjustable time out period.
Daylight Switching
Each switch operates luminaires within the same colour dashed line.
Switches and dims the whiteboard luminaires independently within the same colour dashed line.
Luminaires daylight link – window row only daylight switching.
Upon exiting the space any luminaires left on will switch off after an adjustable time out period.
Daylight Switching
SW1 SW2 SW3 Whiteboard Switch
Emergency Lighting
Test
CH1
CH2
CH3
CH6
CH7
L
N
E
PL
Windows
Whiteboard
CH4CH5
Whiteboard SwitchSW1 SW2 SW3
If using 2 PIRs instead of a microwave detector, the PIR closest to the window will reference LUX and should be connected to Input 1.
Switch inputs
Config 29 – Classroom with 3 rows of luminaires working in absence mode. Whiteboard on channel 5.
Detector/scene plate inputs
SW1 SW2 SW3 Whiteboard Switch
Emergency Lighting
Test
CH1
CH2
CH3
CH4 CH5
CH6
CH7
L
N
E
PL
Windows
Whiteboard Whiteboard SwitchSW1 SW2 SW3
If using 2 PIRs instead of a microwave detector, the PIR closest to the window will reference LUX and should be connected to Input 1.
Switch inputs
Config 28 – Classroom with 3 rows of luminaires working in absence mode. Whiteboard on channels 1, 4 and 5.
Detector/scene plate inputs
Each switch operates luminaires within the same colour dashed line.
Switches and dims the whiteboard luminaires independently within the same colour dashed line.
Luminaires daylight link – window row only daylight switching.
Upon exiting the space any luminaires left on will switch off after an adjustable time out period.
Daylight Switching
Each switch operates luminaires within the same colour dashed line.
Switches and dims the whiteboard luminaires independently within the same colour dashed line.
Luminaires daylight link – window row only daylight switching.
Upon exiting the space any luminaires left on will switch off after an adjustable time out period.
Daylight Switching
CH1
CH2
CH3
CH4 CH5
CH6
CH7
L
N
E
PL
Windows
Wh
iteb
oard
Whiteboard Switch
Main Switch
If using 2 PIRs instead of a microwave detector, the PIR closest to the window will reference LUX and should be connected to Input 1.
Switch inputs
Config 30 – Classroom with luminaires working in absence mode. Whiteboard on channels 1, 2 and 3.
Detector/scene plate inputs
CH1
CH2
CH3
CH4 CH5
CH6
CH7
L
N
E
PL
Windows
Wh
iteb
oard
Whiteboard Switch
Main Switch
If using 2 PIRs instead of a microwave detector, the PIR closest to the window will reference LUX and should be connected to Input 1.
Switch inputs
Config 31 – Classroom with luminaires working in absence mode. Whiteboard on channel 2.
Detector/scene plate inputs
Main Switch
White- board
Switch
Emergency Lighting
Test
Main Switch
White- board
Switch
Emergency Lighting
Test
Each switch operates luminaires within the same colour dashed line.
Switches and dims the whiteboard luminaires independently within the same colour dashed line.
Luminaires daylight link – window row only daylight switching.
Upon exiting the space any luminaires left on will switch off after an adjustable time out period.
Daylight Switching
Each switch operates luminaires within the same colour dashed line.
Switches and dims the whiteboard luminaires independently within the same colour dashed line.
Luminaires daylight link – window row only daylight switching.
Upon exiting the space any luminaires left on will switch off after an adjustable time out period.
Daylight Switching
CH1
CH2
CH3
CH4 CH5
CH6
CH7
L
N
E
PL
Windows
Whiteboard SwitchMain Switch
If using 2 PIRs instead of a microwave detector, the PIR closest to the window will reference LUX and should be connected to Input 1.
Switch inputs
Config 32 – Classroom with luminaires working in absence mode. Whiteboard on channels 1, 4 and 5.
Detector/scene plate inputs
CH1
CH2
CH3
CH4
CH6
CH7
L
N
E
PL
Windows
Whiteboard
CH5
Whiteboard SwitchMain Switch
If using 2 PIRs instead of a microwave detector, the PIR closest to the window will reference LUX and should be connected to Input 1.
Switch inputs
Config 33 – Classroom with luminaires working in absence mode. Whiteboard on channels 5.
Detector/scene plate inputs
Main Switch
White- board
Switch
Emergency Lighting
Test
Main Switch
White- board
Switch
Emergency Lighting
Test
Each switch operates luminaires within the same colour dashed line.
Switches and dims the whiteboard luminaires independently within the same colour dashed line.
Luminaires daylight link – window row only daylight switching.
Upon exiting the space any luminaires left on will switch off after an adjustable time out period.
Daylight Switching
Each switch operates luminaires within the same colour dashed line.
Switches and dims the whiteboard luminaires independently within the same colour dashed line.
Luminaires daylight link – window row only daylight switching.
Upon exiting the space any luminaires left on will switch off after an adjustable time out period.
Daylight Switching
L
N
E
PL
Wh
iteb
oard
SW1 SW2 SW3
Windows
CH1
CH2
CH3
CH4
CH6
CH7
CH5
GROUP 2
GROUP 3
GROUP 4
GROUP 1
Whiteboard Switch
L
N
E
PL
Wh
iteb
oard
SW1 SW2 SW3
Windows
CH1
CH2
CH3
CH4
CH6
CH7
CH5
GROUP 2
GROUP 3
GROUP 4
GROUP 1
Whiteboard Switch
Config 39 – Classroom with 3 rows of fittings switched individually. Whiteboard row on channels 1–3. Scene plate by teachers desk. Detector for LUX (scene 1 only) and absence.
Config 40 – classroom with 3 rows of fittings switched individually. Whiteboard row on channel 2. Scene plate by teachers desk. Detector for LUX (scene 1 only) and absence.
If using 2 PIRs instead of a microwave detector, the PIR closest to the window will reference LUX and should be connected to Input 1.
Switch inputs
Detector/scene plate inputs
If using 2 PIRs instead of a microwave detector, the PIR closest to the window will reference LUX and should be connected to Input 1.
Switch inputs
Detector/scene plate inputs
SW1
SW1
SW2
SW2
SW3
SW3
White- board
Switch
White- board
Switch
Emergency Lighting
Test
Emergency Lighting
Test
Each switch operates luminaires within the same colour dashed line.
Switches and dims the whiteboard luminaires independently. Scene 2 = Whiteboard fittings off.
Luminaires daylight link – graduated dimming from window row, scene 1 only
Upon exiting the space any luminaires left on will switch off after an adjustable time out period.
Dimmable Luminaires
Each switch operates luminaires within the same colour dashed line.
Switches and dims the whiteboard luminaires independently. Scene 2 = Whiteboard fittings off.
Luminaires daylight link – graduated dimming from window row, scene 1 only
Upon exiting the space any luminaires left on will switch off after an adjustable time out period.
Dimmable Luminaires
SC1 100%SC2 75%SC3 50%SC4 25%
SC1 100%SC2 75%SC3 50%SC4 25%
SC1 100%SC2 75%SC3 50%SC4 25%
SC1 100%SC2 75%SC3 50%SC4 25%
SC1 100%SC2 75%SC3 50%SC4 25%
SC1 100%SC2 75%SC3 50%SC4 25%
SC1 100%SC2 OFFSC3 50%SC4 25%
SC1 100%SC2 75%SC3 50%SC4 25%
L
N
E
PL
WhiteboardSW1 SW2 SW3 Whiteboard Switch
Windows
CH1
CH2
CH3
CH4
CH6
CH7
CH5
GROUP 2
GROUP 3
GROUP 4
GROUP 1
L
N
E
PL
WhiteboardSW1 SW2 SW3 Whiteboard Switch
Windows
CH1
CH2
CH3
CH5
CH6
CH7
CH4
GROUP 2
GROUP 3
GROUP 4
GROUP 1
Config 41 – Classroom with 3 rows of fittings switched individually. Whiteboard row on channels 1, 4 and 5. Scene plate by teachers desk. Detector for LUX (scene 1 only) and absence.
Config 42 – Classroom with 3 rows of fittings switched individually. Whiteboard row on channel 5. Scene plate by teachers desk. Detector for LUX (scene 1 only) and absence.
If using 2 PIRs instead of a microwave detector, the PIR closest to the window will reference LUX and should be connected to Input 1.
Switch inputs
Detector/scene plate inputs
If using 2 PIRs instead of a microwave detector, the PIR closest to the window will reference LUX and should be connected to Input 1.
Switch inputs
Detector/scene plate inputs
SW1 SW2
SW2
SW3
SW3
White- board
Switch
White- board
Switch
Emergency Lighting
Test
Emergency Lighting
Test
Each switch operates luminaires within the same colour dashed line.
Switches and dims the whiteboard luminaires independently. Scene 2 = Whiteboard fittings off.
Luminaires daylight link – graduated dimming from window row, scene 1 only
Upon exiting the space any luminaires left on will switch off after an adjustable time out period.
Dimmable Luminaires
Each switch operates luminaires within the same colour dashed line.
Switches and dims the whiteboard luminaires independently. Scene 2 = Whiteboard fittings off.
Luminaires daylight link – graduated dimming from window row, scene 1 only
Upon exiting the space any luminaires left on will switch off after an adjustable time out period.
Dimmable Luminaires
SC1 100%SC2 75%SC3 50%SC4 25%
SC1 100%SC2 75%SC3 50%SC4 25%
SC1 100%SC2 OFFSC3 50%SC4 25%
SC1 100%SC2 75%SC3 50%SC4 25%
SC1 100%SC2 75%SC3 50%SC4 25%
SC1 100%SC2 75%SC3 50%SC4 25%
SC1 100%SC2 75%SC3 50%SC4 25%
SC1 100%SC2 75%SC3 50%SC4 25%
SW1
L
N
E
PL
Wh
iteb
oard
Main Switch
Windows
CH1
CH2
CH3
CH4
CH6
CH7
CH5
GROUP 2
GROUP 3
GROUP 4
GROUP 1
Whiteboard Switch
L
N
E
PL
Wh
iteb
oard
Main Switch
Windows
CH1
CH2
CH3
CH4
CH6
CH7
CH5
GROUP 2
GROUP 3
GROUP 4
GROUP 1
Whiteboard Switch
Config 43 – Classroom with 3 rows switched together but with different dimming pre-set levels per row. Whiteboard channels 1–3. Scene plate by teachers desk. Detector for LUX (scene 1 only) and absence.
Config 44 – Classroom with all fittings switched together. Whiteboard on channels 2. Scene plate by teachers desk. Detector for LUX (scene 1 only) and absence.
If using 2 PIRs instead of a microwave detector, the PIR closest to the window will reference LUX and should be connected to Input 1.
If using 2 PIRs instead of a microwave detector, the PIR closest to the window will reference LUX and should be connected to Input 1.
Switch inputs
Switch inputs
Detector/scene plate inputs
Detector/scene plate inputs
Main Switch
Main Switch
White- board
Switch
White- board
Switch
Emergency Lighting
Test
Emergency Lighting
Test
Main Switch
Switches and dims the whiteboard luminaires independently. Scene 2 = Whiteboard fittings off.
Luminaires daylight link – graduated dimming from window row, scene 1 only
Upon exiting the space any luminaires left on will switch off after an adjustable time out period.
Dimmable Luminaires
Main Switch
Switches and dims the whiteboard luminaires independently. Scene 2 = Whiteboard fittings off.
Luminaires daylight link – graduated dimming from window row, scene 1 only
Upon exiting the space any luminaires left on will switch off after an adjustable time out period.
Dimmable Luminaires
SC1 100%SC2 75%SC3 50%SC4 25%
SC1 100%SC2 75%SC3 50%SC4 25%
SC1 100%SC2 OFFSC3 50%SC4 25%
SC1 100%SC2 OFFSC3 50%SC4 25%
SC1 100%SC2 75%SC3 50%SC4 25%
SC1 100%SC2 75%SC3 50%SC4 25%
SC1 100%SC2 OFFSC3 50%SC4 25%
SC1 100%SC2 75%SC3 50%SC4 25%
L
N
E
PL
Main Switch
Windows
CH1
CH2
CH3
CH4
CH6
CH7
CH5
GROUP 2
GROUP 3
GROUP 4
GROUP 1
Whiteboard Whiteboard Switch
L
N
E
PL
Main Switch
Windows
CH1
CH2
CH3
CH5
CH6
CH7
CH4
GROUP 2
GROUP 3
GROUP 4
GROUP 1
Whiteboard Whiteboard Switch
Config 45 – Classroom with all fittings switched together. Whiteboard on channels 1, 4 and 5. Scene plate by teachers desk. Detector for LUX (scene 1 only) and absence.
Config 46 – Classroom with all fittings switched together. Whiteboard on channel 5. Scene plate by teachers desk. Detector for LUX (scene 1 only) and absence.
If using 2 PIRs instead of a microwave detector, the PIR closest to the window will reference LUX and should be connected to Input 1.
If using 2 PIRs instead of a microwave detector, the PIR closest to the window will reference LUX and should be connected to Input 1.
Switch inputs
Switch inputs
Detector/scene plate inputs
Detector/scene plate inputs
Main Switch
Main Switch
White- board
Switch
White- board
Switch
Emergency Lighting
Test
Emergency Lighting
Test
Main Switch
Switches and dims the whiteboard luminaires independently. Scene 2 = Whiteboard fittings off.
Luminaires daylight link – graduated dimming from window row, scene 1 only
Upon exiting the space any luminaires left on will switch off after an adjustable time out period.
Dimmable Luminaires
Main Switch
Switches and dims the whiteboard luminaires independently. Scene 2 = Whiteboard fittings off.
Luminaires daylight link – graduated dimming from window row, scene 1 only
Upon exiting the space any luminaires left on will switch off after an adjustable time out period.
Dimmable Luminaires
SC1 100%SC2 75%SC3 50%SC4 25%
SC1 100%SC2 75%SC3 50%SC4 25%
SC1 100%SC2 OFFSC3 50%SC4 25%
SC1 100%SC2 75%SC3 50%SC4 25%
SC1 100%SC2 75%SC3 50%SC4 25%
SC1 100%SC2 75%SC3 50%SC4 25%
SC1 100%SC2 75%SC3 50%SC4 25%
SC1 100%SC2 75%SC3 50%SC4 25%
E
PL
Main Switch
Windows
CH1
CH2
CH3
CH4
CH6
CH7
CH5
GROUP 1
GROUP 2
GROUP 3
E
PL
Windows
CH1
CH2
CH3
CH4
CH6
CH7
CH5
GROUP 1
GROUP 2
GROUP 3
SW1 SW2 SW3
Config 47 – Classroom with all fittings switched together. NO Whiteboard. Scene plate by teachers desk. Detector for LUX (scene 1 only) and absence.
Config 48 – Classroom with 3 rows of fittings switched individually. NO whiteboard. Scene plate by teachers desk. Detector for LUX (scene 1 only) and absence.
If using 2 PIRs instead of a microwave detector, the PIR closest to the window will reference LUX and should be connected to Input 1.
If using 2 PIRs instead of a microwave detector, the PIR closest to the window will reference LUX and should be connected to Input 1.
Switch inputs
Switch inputs
Detector/scene plate inputs
Detector/scene plate inputs
Main Switch
Emergency Lighting
Test
Main Switch
Luminaires daylight link – graduated dimming from window row, scene 1 only
Upon exiting the space any luminaires left on will switch off after an adjustable time out period.
Dimmable Luminaires
Each switch operates luminaires within the same colour dashed line.
Luminaires daylight link – graduated dimming from window row, scene 1 only
Upon exiting the space any luminaires left on will switch off after an adjustable time out period.
Dimmable Luminaires
SC1 100%SC2 50%SC3 25%SC4 50%
SC1 100%SC2 50%SC3 25%SC4 50%
SC1 100%SC2 75%SC3 50%SC4 25%
SC1 100%SC2 75%SC3 50%SC4 25%
SC1 100%SC2 25%SC3 25%SC4 75%
SC1 100%SC2 25%SC3 25%SC4 75%
SW2 SW3 Emergency Lighting
Test
SW1
CH1
CH2
CH3
CH4 CH5
CH6
CH7
L
N
E
PL
Wh
iteb
oard
WindowsWhiteboard Switch
Main Switch
If using 2 PIRs instead of a microwave detector, the PIR closest to the window will reference LUX and should be connected to Input 1.
Switch inputs
Config 52 – Classroom with luminaires working in absence mode. Whiteboard on channels 1, 2 and 3 switched independently.
Detector/scene plate inputs
CH1
CH2
CH3
CH4 CH5
CH6
CH7
L
N
E
PL
Wh
iteb
oard
WindowsWhiteboard Switch
SW1 SW2 SW3
If using 2 PIRs instead of a microwave detector, the PIR closest to the window will reference LUX and should be connected to Input 1.
Switch inputs
Config 51 – Classroom with 3 rows of luminaires working in absence mode. Whiteboard on channels 1, 2 and 3 switched independently.
Detector/scene plate inputs
SW1 SW2 SW3 White- board
Switch
Emergency Lighting
Test
Each switch operates luminaires within the same colour dashed line.
Switches and dims the whiteboard luminaires independently within the same colour dashed line.
Luminaires daylight link – graduated dimming from window row.
Upon exiting the space any luminaires left on will switch off after an adjustable time out period.
Dimmable Luminaires
Switch operates luminaires within the same colour dashed line.
Switches and dims the whiteboard luminaires independently within the same colour dashed line.
Luminaires daylight link – graduated dimming from window row.
Upon exiting the space any luminaires left on will switch off after an adjustable time out period.
Dimmable Luminaires
Main Switch
White- board
Switch
Emergency Lighting
Test
CH1
CH2
CH3
CH4 CH5
CH6
CH7
L
N
E
PL
Wh
iteb
oard
WindowsWhiteboard Switch
Main Switch
If using 2 PIRs instead of a microwave detector, the PIR closest to the window will reference LUX and should be connected to Input 1.
Switch inputs
Config 54 – Classroom with luminaires working in absence mode. Whiteboard on channels 1, 2 and 3 switched independently.
Detector/scene plate inputs
CH1
CH2
CH3
CH4 CH5
CH6
CH7
L
N
E
PL
Wh
iteb
oard
WindowsWhiteboard Switch
SW1 SW2 SW3
If using 2 PIRs instead of a microwave detector, the PIR closest to the window will reference LUX and should be connected to Input 1.
Switch inputs
Config 53 – Classroom with 3 rows of luminaires working in absence mode. Whiteboard on channels 1, 2 and 3 switched independently.
Detector/scene plate inputs
SW1 SW2 SW3 White- board
Switch
Emergency Lighting
Test
Each switch operates luminaires within the same colour dashed line.
Switches and dims the whiteboard luminaires independently within the same colour dashed line.
Luminaires daylight link – window row only dimmable.
Upon exiting the space any luminaires left on will switch off after an adjustable time out period.
Dimmable Luminaires
Switch operates luminaires within the same colour dashed line.
Switches and dims the whiteboard luminaires independently within the same colour dashed line.
Luminaires daylight link – window row only dimmable.
Upon exiting the space any luminaires left on will switch off after an adjustable time out period.
Dimmable Luminaires
Main Switch
White- board
Switch
Emergency Lighting
Test
CH1
CH2
CH3
CH4 CH5
CH6
CH7
L
N
E
PL
Wh
iteb
oard
WindowsWhiteboard Switch
Main Switch
If using 2 PIRs instead of a microwave detector, the PIR closest to the window will reference LUX and should be connected to Input 1.
Switch inputs
Config 56 – Classroom with luminaires working in absence mode. Whiteboard on channels 1, 2 and 3 switched independently.
Detector/scene plate inputs
CH1
CH2
CH3
CH4 CH5
CH6
CH7
L
N
E
PL
Wh
iteb
oard
WindowsWhiteboard Switch
SW1 SW2 SW3
If using 2 PIRs instead of a microwave detector, the PIR closest to the window will reference LUX and should be connected to Input 1.
Switch inputs
Config 55 – Classroom with 3 rows of luminaires working in absence mode. Whiteboard on channels 1, 2 and 3 switched independently.
Detector/scene plate inputs
SW1 SW2 SW3 White- board
Switch
Emergency Lighting
Test
Each switch operates luminaires within the same colour dashed line.
Switches and dims the whiteboard luminaires independently within the same colour dashed line.
Luminaires daylight link – window row only daylight switching.
Upon exiting the space any luminaires left on will switch off after an adjustable time out period.
Daylight Switching
Main Switch
White- board
Switch
Emergency Lighting
Test
Switch operates luminaires within the same colour dashed line.
Switches and dims the whiteboard luminaires independently within the same colour dashed line.
Luminaires daylight link – window row only daylight switching.
Upon exiting the space any luminaires left on will switch off after an adjustable time out period.
Daylight Switching
CH7 CH4
CH1
CH2
CH3
CH5
CH6
L
N
E
PL
Wh
iteb
oard
Windows
Win
dow
Whiteboard Switch
SW1 SW2 SW3
CH7 CH4
CH1
CH2
CH3
CH5
CH6
L
N
E
PL
Wh
iteb
oard
Windows
Win
dow
Whiteboard Switch
SW1 SW2 SW3
If using 2 PIRs instead of a microwave detector, the PIR closest to the window will reference LUX and should be connected to Input 1.
If using 2 PIRs instead of a microwave detector, the PIR closest to the window will reference LUX and should be connected to Input 1.
Switch inputs
Switch inputs
Config 57 – Classroom with 4 columns of fittings working in absence mode. Whiteboard on channel 7 switched independently. .
Config 58 – Classroom with 4 columns of fittings working in absence mode. Whiteboard on channel 7 switched independently.
Detector/scene plate inputs
Detector/scene plate inputs
SW1
SW1
SW2
SW2
SW3
SW3
White- board
Switch
White- board
Switch
Emergency Lighting
Test
Emergency Lighting
Test
Each switch operates luminaires within the same colour dashed line.
Switches and dims the whiteboard luminaires independently within the same colour dashed line.
Luminaires closest to the windows daylight dim
Upon exiting the space any luminaires left on will switch off after an adjustable time out period.
Dimmable Luminaires
Each switch operates luminaires within the same colour dashed line.
Switches and dims the whiteboard luminaires independently within the same colour dashed line.
Luminaires closest to the windows daylight switch.
Upon exiting the space any luminaires left on will switch off after an adjustable time out period.
Daylight Switching
CH5 CH4
CH1
CH2
CH3
CH6
CH7
L
N
E
PL
Wh
iteb
oard
Windows
Win
dow
Win
dow
Whiteboard SwitchSW1 SW2 SW3
CH5 CH4
CH1
CH2
CH3
CH6
CH7
L
N
E
PL
Wh
iteb
oard
Windows
Win
dow
Win
dow
Whiteboard SwitchSW1 SW2 SW3
If using 2 PIRs instead of a microwave detector, the PIR closest to the window will reference LUX and should be connected to Input 1.
If using 2 PIRs instead of a microwave detector, the PIR closest to the window will reference LUX and should be connected to Input 1.
Switch inputs
Switch inputs
Config 59 – Classroom with 3 rows of luminaires working in absence mode. Whiteboard on channel 2.
Config 60 – Classroom with 3 rows of luminaires working in absence mode. Whiteboard on channel 2.
Detector/scene plate inputs
Detector/scene plate inputs
SW1
SW1
SW2
SW2
SW3
SW3
White- board
Switch
White- board
Switch
Emergency Lighting
Test
Emergency Lighting
Test
Each switch operates luminaires within the same colour dashed line.
Switches and dims the whiteboard luminaires independently within the same colour dashed line.
Luminaires closest to the windows daylight switch.
Upon exiting the space any luminaires left on will switch off after an adjustable time out period.
Daylight Switching
Each switch operates luminaires within the same colour dashed line.
Switches and dims the whiteboard luminaires independently within the same colour dashed line.
Luminaires closest to the windows daylight dim.
Upon exiting the space any luminaires left on will switch off after an adjustable time out period.
Dimmable Luminaires
