Upload
danghanh
View
219
Download
2
Embed Size (px)
Citation preview
SYNPOWER PRODUCT INFORMATION
To coincide with the introduction of a new bottle design,
an extended line-up of full synthetic products has been
introduced to Valvoline’s premium SynPower range.
Previously, three (3) SynPower full synthetic products
were available in 5L retail packs.
Now, there will be eight (8) SynPower full Synthetic 5L
products available to service the Australian DIY market.
VALVOLINE EXPANDS FULL
SYNTHETIC LINE-UP
P1
SynPower offers maximum performance and protection for everyday and severe driving conditions that place additional pressure on engines like high traffic stop start situations, and highway driving. There is a range of SynPower products to suit your engine type from Euro diesels, naturally aspirated, turbocharged, super charged, 4 cylinder, V6, V8, to standard petrol and diesel engines. To find which SynPower’s are suitable for everyday and high stress driving conditions, look for the FOR EVERYDAY AND HIGH STRESS logo.
Diesel vehicles fitted with Diesel Particle Filter (DPF) emission systems require engine oil thatis formulated with low SAP (Sulphated Ash, Phosphorous and Sulphur) and unique antiwear,detergent and dispersant technology. The right oil maximises emission system protection and enhances the life of your DPF, whilst using the wrong oil can lead to the DPF becoming blocked which can cause engine problems and possibly even lead to engine seizure. If you have a vehicle with a DPF, to find which SynPower products are for DPF vehicles, look for the FOR DPF VEHICLES logo.
Valvoline’s SynPower range includes full synthetic products that meet regulations and specifications like the ILSAC GF-5 fuel efficiency specification. These fuel efficient products provide full protection whilst meeting stringent fuel efficiency demands of modern engines and provide the same superior cold start and fast flow protection that full synthetic SynPower products provide. To find which SynPower products meet Fuel Efficient specifications, look for the FUEL EFFICIENT logo.
Valvoline’s SynPower range has products that are perfect for street and track conditions.Designed for high performance vehicles and engines using alcohol fuels, Valvoline havenow brought their full synthetic offering to a retail pack so the engineering benefits of theirformulation can be utilised by enthusiasts and professionals alike. To find which SynPowerproducts are suitable for street and track conditions, look for the CHECKERED FLAG logo.
Valvoline’s SynPower full synthetic range is formulated with advanced additives to providebetter engine protection than conventional oil. These additives are varied in each formulation to meet specific engine manufacturer requirements. Within the range, there are SynPower products that have been designed to meet specific engine manufacturer’s requirements for long drain interval capabilities. This means that the engine oil is designed to last longer without compromising performance. To find out which SynPower has long drain capabilities and whether it is suitable for your vehicle, look for the LONG LIFE logo indicating long drain intervals and check your owner’s manual book for recommended specifications and oil change intervals.
FOR EVERYDAY AND HIGH STRESS
FOR DPF VEHICLES
FUEL EFFICIENT PRODUCTS
HIGH PERFORMANCE STREET AND TRACK
LONG DRAIN CAPABILITY
Not sure what engine oil to choose? There’s a Synpower to suit your driving needs. See below for driving applications, check your owner’s manual for recommended oil grade, and use the Valvoline lube guide to find the SynPower that suits your vehicle.
SYNPOWER – DRIVING APPLICATIONS
SCAN CODE TO ACCESS LUBE GUIDE P2
PREMIUM FULL SYNTHETIC ENGINE OIL FOR ULTIMATE PROTECTION & PERFORMANCE.
SynPower 0W-40 is a premium full synthetic engine oil formulated with high quality base stocks and advanced additives for extended drain intervals for selected vehicles.
Meets requirements of leading European manufacturers Mercedes Benz and BMW.Also suitable for other passenger cars where for API SM, SL is recommended.
SYNPOWER 0W-40PART NO: 1168.05
SPECIFICATIONS
API: SN/CF
ACEA: A3/B4/B4
BMW LL-01
MB 229.3, 229.5
VW 502.00, 505.00
Porsche A40
Renault RN 0700, RN 0710
P3 * Always check manufacturer specifications for correct oil recommendation.
PREMIUM SYNTHETIC LONG LIFE ENGINE OILSynPower XL-lll 5W-30 is a premium, long life synthetic motor oil designated for latest generation Volkswagen petrol engines and diesel engines fitted with DPF (Diesel Particulate Filter) technology. This premium synthetic engine oil is also suitable for other European vehicles such as BMW and Mercedes Benz.
This oil can also be used where VW 503.00, 506.00, 506.01 is specified.
SynPower XL-lll 5W-30 is suitable for engines
with WIV system (WIV is a European drain interval system). SynPower XL-lll 5W-30 can be used in modern VW, AUDI, Skoda petrol and diesel engines and gives excellent protection even under extreme circumstances.
SYNPOWER XL-III 5W-30PART NO: 1184.05
SPECIFICATIONS
VW 504.00, 507.00
ACEA: C3
BMW LL-04
MB 229.51
* Always check manufacturer specifications for correct oil recommendation. P4
FULL SYNTHETIC FUEL EFFICIENT ENGINE OIL.
This full synthetic lubricant is specially designed for use in modern Ford petrol and diesel engines with the intent to reduce exhaust emissions and improve fuel efficiency calling for Ford WSS-M2C-913D, C, B and A.
Also suitable for other passenger car and light duty diesel vehicles where ACEA A5/B5 or API SL/CF is recommended.
SYNPOWER FE 5W-30PART NO: 1298.05
SPECIFICATIONS
Ford WSS-M2C-913D
API: SL/CF
ACEA: A1/B1
ACEA: A5/B5
Ford WSS-M2C-913C, B, A
RENAULT RN700
* Always check manufacturer specifications for correct oil recommendation.P5
FULL SYNTHETIC FUEL EFFICIENT PETROL ENGINE OIL FORGM HOLDEN, FORD, NISSAN, TOYOTA, MAZDA, SUBARU.
SynPower DX-1 5W-30 is a low viscosity full synthetic motor oil formulated with a combination of premium synthetic and quality base stocks and advanced additive technology.
Designed for modern engines, it meets the ILSAC GF-5 fuel efficiency specification as well as GM dexos 1™ specification.
It is suitable for use in a variety of applications including Holden, Ford, Nissan, Toyota, Mazda, Subaru.
SYNPOWER DX1 5W-30PART NO: 1299.05
SPECIFICATIONS
API: SN
GM dexos 1™ Approved
ILSAC GF-5
* Always check manufacturer specifications for correct oil recommendation. P6
LOW-SAPS FULL SYNTHETIC PASSENGER CAR MOTOR OIL FOR VEHICLES WITH DPF.
SynPower MST 5W-30 is a full synthetic motor oil formulated for Mercedes Benz and other latest generation Euro diesel engines equipped with DPF technology (Diesel Particulate Filter), and/or petrol engines with TWC (Three Way Catalyst).
This oil is suitable for passenger car and light duty engines and vehicles with or without DPF systems where the following specifications are listed.
SYNPOWER MST 5W-30PART NO: 1186.05
SPECIFICATIONS
API: SN/CF
ACEA: A3/B4
ACEA: C3
GM dexos 2™ Approved
BMW LL-04
MB 229.51
* Always check manufacturer specifications for correct oil recommendation.P7
SPECIFICATIONS
API: SN/CF
ACEA: A3/B4
ACEA: C3
GM dexos 2™ Approved
BMW LL-04
MB 229.51
SYNPOWER MST 5W-40PART NO: 1293.05
LOW-SAPS FULL SYNTHETIC PASSENGER CAR MOTOR OIL FOR VEHICLES WITH DPF.
SynPower MST 5W-40 is a full synthetic motor oil formulated for Mercedes Benz and other latest generation Euro diesel engines equipped with DPF technology (Diesel Particulate Filter), and/or petrol engines with TWC (Three Way Catalyst).
This oil is suitable for passenger car and light duty engines and vehicles with or without DPF systems where the following specifications are listed.
* Always check manufacturer specifications for correct oil recommendation. P8
SYNPOWER 5W-40 ENGINE OIL DELIVERS ULTIMATE PROTECTION AND PERFORMANCE DURING EVERYDAY AND HIGH STRESS DRIVING CONDITIONS.
Full synthetic engine oil developed for high tech engines and engines that experience severe driving conditions like stop start conditions in high traffic situations and highway driving. It is also suitable for naturally aspirated and turbo-charged petrol engines and is also suitable for some passenger diesel engines.
SYNPOWER 5W-40PART NO: 1155.05
SPECIFICATIONS
API: SN/CF
ACEA: A3/B4
BMW LL-01
VW 501.00, 505.00
* Always check manufacturer specifications for correct oil recommendation.P9
HIGH VISCOSITY FULL SYNTHETIC ENGINE OIL FOR USE IN HIGH PERFORMANCE VEHICLES IN STREET AND TRACK CONDITIONS.SynPower 10W-50 is a full synthetic motor oil that is ideal for high performance naturally aspirated, super charged, turbo charged, 4 cylinder, V6 and V8 engines.
It offers exceptional performance & protection for fuel injected vehicles with a catalytic converter.
It is also suitable for older vehicles fitted with a carburettor.
This high performance engine oil is suitable for street and track conditions.
SYNPOWER 10W-50PART NO: 1165.05
SPECIFICATIONS
API: SN/CF
ACEA: A3/B4
VW 502.00, 505.00
* Always check manufacturer specifications for correct oil recommendation. P10
ValVoline Synpower flows faster to all parts of the engine for the power man instinctively craves.