Upload
others
View
8
Download
0
Embed Size (px)
Citation preview
1
T54
Now plane surfaces correctly!
2 | 3 A decision for generations: T54 from the Premium Class
T54 A surface planer which fits your workshop perfectly.
The T54 is a surface planer that was mainly developed in
order to fulfil two tasks – the perfect dressing of workpieces
and the fast and reliable application of angled edges on these
workpieces. Because only with perfect surface planing results
can you get the perfect end result. The smooth-running fence
with integrated auxiliary fence enables quick and precise
working. The fence runs smoothly and without tilting on ball
bearing guided courses – as precise years later as on the very
first day. Even chamfers can be planed in an instant, because
with the user-friendly single-handed adjustment every angle
between 90° and 45° can be set quickly.
T54 with accessories (further details in the options book)
T544 | Moving control desk
T541 | TERSA cutter block Z4
T5462 | SUVAMATIC bridge guard
3
Auxiliary fence
The serial auxiliary fence is already
integrated in the surfacing fence, to
safely guide small, narrow workpieces
over the machine table. This is an
important contribution to more working
safety.
Modern SUVAbridge guard
TERSA Centrifugal force tension
More convenience and overview
4 | 5 A decision for generations: Operation | Composite frames
Clear operation for efficient planing.
Operation at a glance.
Operation of the T54 is as easy as it’s effective. Whether you
set chip removal or turn the machine on or off – everything is
in one place and easily accessible. You can even reach the
hollow / V-shaped joint settings from here, the scale shows
you the setting.
Moving control panel
The operating elements installed as standard on the infeed
table can optionally be provided above the table level. The
chip removal is displayed digitally at a resolution of 0.1 mm
and can be precisely set at the touch of a button. Good for all
those who like to keep an eye on all the important stuff.
When the surfacing fence travels on the table, the control panel
also moves with it and is also in easy reach of the operator.
Control panel | T544
Control panel combined with and moves with surfacing fence | T544Control panel of the T54 | Standard
5
Robust, solid and durable construction.
Composite frame | Standard
Only at MARTIN.
The machine frame of the T54 is a stable, thick walled
composite structure, that is only found in MARTIN products.
Already back in the 1920s Otto Martin invented and registered
this design. Today, after 95 years of continuous improvement,
this simple yet good principle is still being used for the frames
at MARTIN. The smart combination of steel and concrete
creates a high quality frame unequalled in terms of stability,
damping capacity and torsional stiffness. The vibrations that
occur in any planer are absorbed much more effectively than
in cast iron frames or welded structures. These stands are
the perfect base for your perfect work!
The unique construction of the
MARTIN composite frames leads to incomparable
stability.
The guidance that you need.
The ball bearing guided planing stop runs softly on
hardened rails and without twisting – precisely for
years just like on the first day. Even chamfers can be
planed in an instant, because with the user-friendly
single-handed adjustment every angle between 90°
and 45° can be set quickly. Also worth mentioning is
the integrated auxiliary fence, which makes processing
narrower parts much safer.
A decision for generations: Edging fence | SUVAMATIC safety guard7 6 |
Edging fence | Standard
Tilting angle
90° and 45°
7
Protection at a Swiss level.
The SUVAMATIC safety guard stands for
first class functionality and the highest
safety. The reversible infeed spout pro-
duces a light contact pressure against
the fence during joining depending on
the setting.
SUVAMATIC safety guard | T5462
Xplane – the future has begun.
The new 3 row Xplane cutterhead from MARTIN
im presses with a remarkably smooth operation even
when idling. This impression is again underlined with
the cutterhead in action – it works at a very low noise
level. Even the largest chip removal needs a surprisingly
low motor rating – another advantage. However, what’s
really fascinating is the surface qualities which can
be reached with the Xplane even on the most difficult
woods.
8 | 9 A decision for generations: Xplane cutterblock
Xplane cutterblock | T5406/3
9
Xplane cutterhead | T5406/3
10 | 11 Eine Entscheidung für Generationen: Formatkreissäge
TERSA cutterblock Z4 | T541
10 | 11 A decision for generations: TERSA solid steel cutterblock
Always the right blade with TERSA.
The TERSA solid steel cutterblock of the T54 offers
many practical benefits: The high degree of quiet
running in the precision bearings and the precise fit of
the two form-fit reversible blades give an extremely exact
knife cutting diameter – and so the best conditions for
cleanly planed surfaces. The TERSA reversible blade
is available in four different qualities, i.e. for all tasks,
and the cutterblock can also be delivered as Z4 shaft,
on request. And the blade change itself only takes a
few seconds.
11 11
12 | 13
Cleverly combined.T45 and T54: Two singles – a perfect pair.
A decision for generations: T45 and T54 | Combi planer
With the T54 surface planer and the T45 thickness planer
you have two specialists who complement each other perfectly.
Each of the two machines is designed for uncompromising
fulfilment of their roles and ensures optimum working results.
Each of the required machines is available immediately and
without time-consuming conversions, and thanks to the space-
saving installation both machines together hardly require any
more space than a combi machine.
Also in contrast to the combi machine both machines can
be operated in parallel without any restrictions. Extraction can
be optionally connected to all T45 machines, depending on
production environment, right or left, without restricting material
and work flow in your facility.
With the duo we open up unique possibilities to you, which
go far beyond the previously known combinations. Extensive
accessories and equipment are available for both machines.
So it’s really easy to perfectly adapt the machines to your
respective requirements.
13
Combined installation T45 and T54 | Plan view
14 | 15 A decision for generations: T54 | Technical data
T54 | Side view T54 | Plan view
T54 Surface planer
Combined installation T45 and T54 | Plan view
T45 and T54 combined
530
515
510
850
ø 160
16402850
1200
850
260
ø 160
1966
530
3072
15
The machines generate very little dust as per BGI 739-1 Annex 1.
All dimensions in millimetres. Manufactured in Germany.
Dimensions and specifications subject to technical innovation and may be changed without notice.
Illustrations may differ from the original. The binding technical features and equipment are given in
the applicable price list.
Technical data
T54 T45 T45 Contour15 T45 Contour25
Motor poweroptional
5.5 kW –
5.5 kW7.5 kW | 11.0 kW
7.5 kW 11.0 kW
7.5 kW 11.0 kW
Cutter block speedoptional
5,000 rpm6,000 rpm
5,000 rpm6,000 rpm
5,000 rpm6,000 rpm
5,000 rpm6,000 rpm
Cutter blockoptional
TERSA Z2Xplane
TERSA Z4Xplane
TERSA Z4plus 2 grooves for profile cutter
TERSA Z4plus 2 grooves for profile cutter
Cutter block diameter 125 mm 125 mm 125 mm 125 mm
Planing height – 2.8 – 300 mm 2.8 – 300 mm 2.8 – 300 mm
Planing width 500 mm 630 mm 630 mm 630 mm
Chip removal max. 8 mm max. 12 mm max. 12 mm max. 5 mm
Control none Single axle control Single axle control Single axle control
Feedoptional
––
6 | 12 m/mincontinuous
6 | 12 m/mincontinuous
6 | 12 m/mincontinuous
Profiling depth – – max. 15.5 mm max. 25 mm
Extraction connection 160 mm 160 mm 160 mm 160 mm
Weight approx. 1,200 kg approx. 1,350 – 1,500 kg
approx. 1,350 – 1,500 kg
approx. 1,350 – 1,500 kg
16 | 16 Eine Entscheidung für Generationen: Formatkreissäge
FacebookWebsite
05/2
017
YouTube Brochure
Otto Martin Maschinenbau GmbH & Co. KG Langenberger Str. 6, 87724 Ottobeuren/Germany T +49 (0) 8332 911 - 0 www.martin.info [email protected]
MARTIN Woodworking Machines Corp. 8715 Sidney Circle, Ste. 100, Charlotte, NC 28269/USA T (704) 921 0360 www.martin-usa.com [email protected]
Visit us at:
Contact us at:
+49 (0) 8332 911 - 0
© C
over
: ja
mes
_whe
eler
| Ad
obe
Sto
ck