Table Mil Std 105e

7/27/2019 Table Mil Std 105e

1/19

KUMPULAN TABEL MIL-STD-105E

Ir. Budi Nurtama, M.Agr.

2008

Program Studi Supervisor Jaminan Mutu PanganPROGRAM DIPLOMA

Institut Pertanian Bogor


2/19

i

Tables for MIL-STD-105E*)

Page

Table I. Sample-Size Code Letters. 1

Table II-A. Single Sampling Plans for Normal Inspection (Master Table). 2

Table II-B. Single Sampling Plans for Tightened Inspection (Master Table). 3

Table II-C. Single Sampling Plans for Reduced Inspection (Master Table). 4

Table III-A. Double Sampling Plans for Normal Inspection (Master Table). 5

Table III-B. Double Sampling Plans for Tightened Inspection (Master Table). 6

Table III-C. Double Sampling Plans for Reduced Inspection (Master Table). 7

Table IV-A. Multiple Sampling Plans for Normal Inspection (Master Table). 8

Table IV-A.(continued) 9

Table IV-B. Multiple Sampling Plans for Tightened Inspection (Master Table). 10

Table IV-B.(continued). 11

Table IV-C. Multiple Sampling Plans for Reduced Inspection (Master Table). 12

Table IV-C.(continued). 13

Table V-A. Average Outgoing Quality Limit Factors for Normal Inspection (Single Sampling). 14

Table V-A. Average Outgoing Quality Limit Factors for Tightened Inspection (Single Sampling). 15

Table VIII. Limit Numbers for Reduced Inspection. 16

*)Farnum, Nicholas R. 1994. Modern Statistical Quality Control and Improvement. Wadsworth, Inc., California.


3/19

ii

Tahapan Implementasi MIL-STD-105E

1. TentukanAQL (Acceptable Quality Level)berdasarkan perjanjian produsen dan pelanggan.

2. Tetapkan modus dan tingkat inspeksi (jika tidak, gunakanNormal Inspection,Level II).

3. Tentukan ukuran lot (lot size).

4. Gunakan tabel Sample Size Code Letters untuk memilih huruf kode yang sesuai.

5. Tetapkan tipe prosedur pengambilan sampel : single, double, atau multiple sampling.

6. Gunakan tabel yang berkaitan dengan prosedur pengambilan sampel terpilih (tahap 5) dan modus/tingkat inspeksi (tahap 2) untuk mendapatkan ukuran sampel

dan angka penerimaan (Ac) serta angka penolakan (Re). Dalam kasus dimana suatu rancangan tidak ada untuk ukuran lot dan AQL-nya, hati-hati mengikuti

tanda panah dalam tabel ke rancangan terdekat yang ada.

7. Mulailah gunakan rancangan tersebut dan catat penerimaan dan penolakan sehingga switching rule dapat diterapkan. Jika switching dilakukan, tentukan modus

dan tingkat dan ulangi tahap 4-6 untuk mendapatkan rancangan pengambilan sampel yang baru.

SWITCHING RULE for MIL-STD-105E

DariNormal ke Tightened Inspection : setelah 2 lot ditolak dari 2, 3, 4, atau 5 lot berurutan

Dari Tightened keNormal Inspection : setelah 5 lot berurutan diterima

DariNormal keReduced Inspection : jika (i) 10 lot berurutan diterima, dan (ii) jumlah total nonconforming items dalam 10 lot tersebut tidak melebihi batas

pada Table VIII. Limit Numbers for Reduced Inspection., dan (iii) produksi stabil/mantap, dan (iv) disetujui oleh otoritas

yang bertanggungjawab.

DariReduced keNormal Inspection : jika (i) suatu lot tunggal ditolak, atau (ii) suatu lot hanya sebagian dapat diterima (dhi. jumlah nonconforming items

diantara angka diterima dan ditolak), atau (iii) produksi menjadi tidak stabil, atau (iv) kondisi-kondisi lain yang

menjamin bahwa inspeksi Normal dapat dilakukan.


4/19

1

Table I. Sample-Size Code Letters.

Lot or batch size

Special Inspection Levels General Inspection Levels

S-1 S-2 S-3 S-4 I II III

2 to 8

9 to 15

16 to 25

A

A

A

A

A

A

A

A

B

A

A

B

A

A

B

A

B

C

B

C

D

26 to 50

51 to 90

91 to 150

A

B

B

B

B

B

B

C

C

C

C

D

C

C

D

D

E

F

E

F

G

151 to 280

281 to 500

501 to 1,200

B

B

C

C

C

C

D

D

E

E

E

F

E

F

G

G

H

J

H

J

K

1,201 to 3,200

3,201 to 10,000

10,001 to 35,000

C

C

C

D

D

D

E

F

F

G

G

H

H

J

K

K

L

M

L

M

N

35,001 to 150,000

150,001 to 500,000

500,001 and over

D

D

D

E

E

E

G

G

H

J

J

K

L

M

N

N

P

Q

P

Q

R


5/19

2

Table II - A. Single Sampling Plans for Normal Inspection (Master Table).

Samplesizecodeletter

Samplesize

Acceptable Quality Levels (normal inspection)

0.010 0.015 0.025 0.040 0.065 0.10 0.15 0.25 0.40 0.65 1.0 1.5 2.5 4.0 6.5 10 15 25 40 65 100 150 250 400 650 1000

Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re

A

B

C

2

3

5 0 1

0 1

0 1

1 2

1 2

2 3

1 2

2 3

3 4

2 3

3 4

5 6

3 4

5 6

7 8

5 6

7 8

10 11

7 8

10 11

14 15

10 11

14 15

21 22

14 15

21 22

30 31

21 22

30 31

44 45

30 31

44 45

D

E

F

8

13

20 0 1

0 1

0 1

1 2

1 2

2 3

1 2

2 3

3 4

2 3

3 4

5 6

3 4

5 6

7 8

5 6

7 8

10 11

7 8

10 11

14 15

10 11

14 15

21 22

14 15

21 22

21 22

30 31

30 31

44 45

44 45

G

H

J

32

50

80 0 1

0 1

0 1

1 2

1 2

2 3

1 2

2 3

3 4

2 3

3 4

5 6

3 4

5 6

7 8

5 6

7 8

10 11

7 8

10 11

14 15

10 11

14 15

21 22

14 15

21 22

21 22

K

L

M

125

200

315 0 1

0 1

0 1

1 2

1 2

2 3

1 2

2 3

3 4

2 3

3 4

5 6

3 4

5 6

7 8

5 6

7 8

10 11

7 8

10 11

14 15

10 11

14 15

21 22

14 15

21 22

21 22

N

P

Q

500

800

1250 0 1

0 1

0 1

1 2

1 2

2 3

1 2

2 3

3 4

2 3

3 4

5 6

3 4

5 6

7 8

5 6

7 8

10 11

7 8

10 11

14 15

10 11

14 15

21 22

14 15

21 22

21 22

R 2000 1 2 2 3 3 4 5 6 7 8 10 11 14 15 21 22

= Use first sampling plan below arrow. If sample size equals or exceeds lot or batch size, do 100 percent inspection. Ac = Acceptance number.

= Use first sampling plan above arrow. Re = Rejection number.


6/19

3

Table II - B. Single Sampling Plans for Tightened Inspection (Master Table).


Samplesize

Acceptable Quality Levels (tightened inspection)

0.010 0.015 0.025 0.040 0.065 0.10 0.15 0.25 0.40 0.65 1.0 1.5 2.5 4.0 6.5 10 15 25 40 65 100 150 250 400 650 1000


A

B

C

2

3

5 0 1

0 1

1 2

1 2

2 3

1 2

2 3

3 4

2 3

3 4

5 6

3 4

5 6

8 9

5 6

8 9

12 13

8 9

12 13

18 19

12 13

18 19

27 28

18 19

27 28

41 42

27 28

41 42

D

E

F

8

13

20 0 1

0 1

0 1

1 2

1 2

2 3

1 2

2 3

3 4

2 3

3 4

5 6

3 4

5 6

8 9

5 6

8 9

12 13

8 9

12 13

18 19

12 13

18 19

18 19

27 28

27 28

41 42

41 42

G

H

J

32

50

80 0 1

0 1

0 1

1 2

1 2

2 3

1 2

2 3

3 4

2 3

3 4

5 6

3 4

5 6

8 9

5 6

8 9

12 13

8 9

12 13

18 19

12 13

18 19

18 19

K

L

M

125

200

315 0 1

0 1

0 1

1 2

1 2

2 3

1 2

2 3

3 4

2 3

3 4

5 6

3 4

5 6

8 9

5 6

8 9

12 13

8 9

12 13

18 19

12 13

18 19

18 19

N

P

Q

500

800

1250 0 1

0 1

0 1

1 2

1 2

2 3

1 2

2 3

3 4

2 3

3 4

5 6

3 4

5 6

8 9

5 6

8 9

12 13

8 9

12 13

18 19

12 13

18 19

18 19

R

S

2000

3150

0 1

1 2

1 2 2 3 3 4 5 6 8 9 12 13 18 19

= Use first sampling plan below arrow. If sample size equals or exceeds lot or batch size, do 100 percent inspection. Ac = Acceptance number.= Use first sampling plan above arrow. Re = Rejection number.


7/19

Table II - C. Single Sampling Plans for Reduced Inspection (Master Table).


Samplesize

Acceptable Quality Levels (reduced inspection)

0.010 0.015 0.025 0.040 0.065 0.10 0.15 0.25 0.40 0.65 1.0 1.5 2.5 4.0 6.5 10 15 25 40 65 100 150 250 400 650 1000


A

B

C

2

2

2 0 1

0 1

0 1

0 2

0 2

1 3

1 2

1 3

1 4

2 3

2 4

2 5

3 4

3 5

3 6

5 6

5 6

5 8

7 8

7 8

7 10

10 11

10 11

10 13

14 15

14 15

14 17

21 22

21 22

21 24

30 31

30 31

D

E

F

3

5

8 0 1

0 1

0 1

0 2

0 2

1 3

0 2

1 3

1 4

1 3

1 4

2 5

1 4

2 5

3 6

2 5

3 6

5 8

3 6

5 8

7 10

5 8

7 10

10 13

7 10

10 13

10 13

14 17

14 17

21 24

21 24

G

H

J

13

20

32 0 1

0 1

0 1

0 2

0 2

1 3

0 2

1 3

1 4

1 3

1 4

2 5

1 4

2 5

3 6

2 5

3 6

5 8

3 6

5 8

7 10

5 8

7 10

10 13

7 10

10 13

10 13

K

L

M

50

80

125 0 1

0 1

0 1

0 2

0 2

1 3

0 2

1 3

1 4

1 3

1 4

2 5

1 4

2 5

3 6

2 5

3 6

5 8

3 6

5 8

7 10

5 8

7 10

10 13

7 10

10 13

10 13

N

P

Q

200

315

500 0 1

0 1

0 1

0 2

0 2

1 3

0 2

1 3

1 4

1 3

1 4

2 5

1 4

2 5

3 6

2 5

3 6

5 8

3 6

5 8

7 10

5 8

7 10

10 13

7 10

10 13

10 13

R 800 0 2 1 3 1 4 2 5 3 6 5 8 7 10 10 13



= If the acceptance number has been exceeded, but the rejection number has not been reached; accept the lot, but reinstate normal inspection.


8/19

Table III - A. Double Sampling Plans for Normal Inspection (Master Table).


SampleSample

size

Cumulative

samplesize


0.010 0.015 0.025 0.040 0.065 0.10 0.15 0.25 0.40 0.65 1.0 1.5 2.5 4.0 6.5 10 15 25 40 65 100 150 250 400 650 10

Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac

A

B First

Second

2

2

2

4

0 2

1 2

0 3

3 4

1 4

4 5

2 5

6 7

3 7

8 9

5 9

12 13

7 11

18 19

11 16

26 27

17 22

37 38

25

56C First

Second

3

3

3

6

0 2

1 2

0 3

3 4

1 4

4 5

2 5

6 7

3 7

8 9

5 9

12 13

7 11

18 19

11 16

26 27

17 22

37 38

25 31

56 57

D First

Second

5

5

5

10

0 2

1 2

0 3

3 4

1 4

4 5

2 5

6 7

3 7

8 9

5 9

12 13

7 11

18 19

11 16

26 27

17 22

37 38

25 31

56 57

E First

Second

8

8

8

16

0 2

1 2

0 3

3 4

1 4

4 5

2 5

6 7

3 7

8 9

5 9

12 13

7 11

18 19

11 16

26 27

17 22

37 38

25 31

56 57

F First

Second

13

13

13

26

0 2

1 2

0 3

3 4

1 4

4 5

2 5

6 7

3 7

8 9

5 9

12 13

7 11

18 19

11 16

26 27

G First

Second

20

20

20

40

0 2

1 2

0 3

3 4

1 4

4 5

2 5

6 7

3 7

8 9

5 9

12 13

7 11

18 19

11 16

26 27

H First

Second

32

32

32

64

0 2

1 2

0 3

3 4

1 4

4 5

2 5

6 7

3 7

8 9

5 9

12 13

7 11

18 19

11 16

26 27

J FirstSecond

5050

50100

0 21 2

0 33 4

1 44 5

2 56 7

3 78 9

5 912 13

7 1118 19

11 1626 27

K First

Second

80

80

80

160

0 2

1 2

0 3

3 4

1 4

4 5

2 5

6 7

3 7

8 9

5 9

12 13

7 11

18 19

11 16

26 27

L First

Second

125

125

125

250

0 2

1 2

0 3

3 4

1 4

4 5

2 5

6 7

3 7

8 9

5 9

12 13

7 11

18 19

11 16

26 27

M First

Second

200

200

200

400

0 2

1 2

0 3

3 4

1 4

4 5

2 5

6 7

3 7

8 9

5 9

12 13

7 11

18 19

11 16

26 27

N First

Second

315

315

315

630

0 2

1 2

0 3

3 4

1 4

4 5

2 5

6 7

3 7

8 9

5 9

12 13

7 11

18 19

11 16

26 27

P First

Second

500

500

500

1000

0 2

1 2

0 3

3 4

1 4

4 5

2 5

6 7

3 7

8 9

5 9

12 13

7 11

18 19

11 16

26 27

Q First

Second

800

800

800

1600

0 2

1 2

0 3

3 4

1 4

4 5

2 5

6 7

3 7

8 9

5 9

12 13

7 11

18 19

11 16

26 27R First

Second

1250

1250

1250

2500

0 2

1 2

0 3

3 4

1 4

4 5

2 5

6 7

3 7

8 9

5 9

12 13

7 11

18 19

11 16

26 27



= Use corresponding single sampling plan (or alternatively, use double sampling plan below, where available).


9/19

Table III - B. Double Sampling Plans for Tightened Inspection (Master Table).


SampleSample

size

Cumulative

samplesize


0.010 0.015 0.025 0.040 0.065 0.10 0.15 0.25 0.40 0.65 1.0 1.5 2.5 4.0 6.5 10 15 25 40 65 100 150 250 400 650 10


A

B First

Second

2

2

2

4

0 2

1 2

0 3

3 4

1 4

4 5

2 5

6 7

3 7

11 12

6 10

15 16

9 14

23 24

15 20

34 35

23

52

C First

Second

3

3

3

6

0 2

1 2

0 3

3 4

1 4

4 5

2 5

6 7

3 7

11 12

6 10

15 16

9 14

23 24

15 20

34 35

23 29

52 53

D First

Second

5

5

5

10

0 2

1 2

0 3

3 4

1 4

4 5

2 5

6 7

3 7

11 12

6 10

15 16

9 14

23 24

15 20

34 35

23 29

52 53

E First

Second

8

8

8

16

0 2

1 2

0 3

3 4

1 4

4 5

2 5

6 7

3 7

11 12

6 10

15 16

9 14

23 24

15 20

34 35

23 29

52 53

F First

Second

13

13

13

26

0 2

1 2

0 3

3 4

1 4

4 5

2 5

6 7

3 7

11 12

6 10

15 16

9 14

23 24

G First

Second

20

20

20

40

0 2

1 2

0 3

3 4

1 4

4 5

2 5

6 7

3 7

11 12

6 10

15 16

9 14

23 24

H First

Second

32

32

32

64

0 2

1 2

0 3

3 4

1 4

4 5

2 5

6 7

3 7

11 12

6 10

15 16

9 14

23 24

J First

Second

50

50

50

100

0 2

1 2

0 3

3 4

1 4

4 5

2 5

6 7

3 7

11 12

6 10

15 16

9 14

23 24

K First

Second

80

80

80

160

0 2

1 2

0 3

3 4

1 4

4 5

2 5

6 7

3 7

11 12

6 10

15 16

9 14

23 24

L First

Second

125

125

125

250

0 2

1 2

0 3

3 4

1 4

4 5

2 5

6 7

3 7

11 12

6 10

15 16

9 14

23 24

M First

Second

200

200

200

400

0 2

1 2

0 3

3 4

1 4

4 5

2 5

6 7

3 7

11 12

6 10

15 16

9 14

23 24

N First

Second

315

315

315

630

0 2

1 2

0 3

3 4

1 4

4 5

2 5

6 7

3 7

11 12

6 10

15 16

9 14

23 24

P First

Second

500

500

500

1000

0 2

1 2

0 3

3 4

1 4

4 5

2 5

6 7

3 7

11 12

6 10

15 16

9 14

23 24

Q First

Second

800

800

800

1600

0 2

1 2

0 3

3 4

1 4

4 5

2 5

6 7

3 7

11 12

6 10

15 16

9 14

23 24

R First

Second

1250

1250

1250

2500

0 2

1 2

0 3

3 4

1 4

4 5

2 5

6 7

3 7

11 12

6 10

15 16

9 14

23 24

S First

Second

2000

2000

2000

4000

0 2

1 2


= Use first sampling plan above arrow. Re = Rejection number. = Use corresponding single sampling plan (or alternatively, use double sampling plan below, where available).


10/19

Table III - C. Double Sampling Plans for Reduced Inspection (Master Table).


SampleSample

size

Cumulative

samplesize


0.010 0.015 0.025 0.040 0.065 0.10 0.15 0.25 0.40 0.65 1.0 1.5 2.5 4.0 6.5 10 15 25 40 65 100 150 250 400 650 10


A

B

C

D First

Second

2

2

2

4

0 2

0 2

0 3

0 4

0 4

1 5

0 4

3 6

1 5

4 7

2 7

6 9

3 8

8 12

5 10

12 16

7 12

18 22

11 17

26 30

E First

Second

3

3

3

6

0 2

0 2

0 3

0 4

0 4

1 5

0 4

3 6

1 5

4 7

2 7

6 9

3 8

8 12

5 10

12 16

7 12

18 22

11 17

26 30

F First

Second

5

5

5

10

0 2

0 2

0 3

0 4

0 4

1 5

0 4

3 6

1 5

4 7

2 7

6 9

3 8

8 12

5 10

12 16

G First

Second

8

8

8

16

0 2

0 2

0 3

0 4

0 4

1 5

0 4

3 6

1 5

4 7

2 7

6 9

3 8

8 12

5 10

12 16

H First

Second

13

13

13

26

0 2

0 2

0 3

0 4

0 4

1 5

0 4

3 6

1 5

4 7

2 7

6 9

3 8

8 12

5 10

12 16

J First

Second

20

20

20

40

0 2

0 2

0 3

0 4

0 4

1 5

0 4

3 6

1 5

4 7

2 7

6 9

3 8

8 12

5 10

12 16

K First

Second

32

32

32

64

0 2

0 2

0 3

0 4

0 4

1 5

0 4

3 6

1 5

4 7

2 7

6 9

3 8

8 12

5 10

12 16

L FirstSecond

5050

50100

0 20 2

0 30 4

0 41 5

0 43 6

1 54 7

2 76 9

3 88 12

5 1012 16

M First

Second

80

80

80

160

0 2

0 2

0 3

0 4

0 4

1 5

0 4

3 6

1 5

4 7

2 7

6 9

3 8

8 12

5 10

12 16

N First

Second

125

125

125

250

0 2

0 2

0 3

0 4

0 4

1 5

0 4

3 6

1 5

4 7

2 7

6 9

3 8

8 12

5 10

12 16

P First

Second

200

200

200

400

0 2

0 2

0 3

0 4

0 4

1 5

0 4

3 6

1 5

4 7

2 7

6 9

3 8

8 12

5 10

12 16

Q First

Second

315

315

315

630

0 2

0 2

0 3

0 4

0 4

1 5

0 4

3 6

1 5

4 7

2 7

6 9

3 8

8 12

5 10

12 16

R First

Second

500

500

500

1000

0 2

0 2

0 3

0 4

0 4

1 5

0 4

3 6

1 5

4 7

2 7

6 9

3 8

8 12

5 10

12 16

= Use first sampling plan below arrow. If sample size equals or exceeds lot or batch size, do 100 percent inspection.

= Use first sampling plan above arrow.

Ac = Acceptance number.

Re = Rejection number.

= Use corresponding single sampling plan (or alternatively, use double sampling plan below, where available).

= If, after the second sample, the acceptance number has been exceeded, but the rejection number has not been reached, accept the lot, but reinstate normal inspection.


11/19

Table IV- A. Multiple Sampling Plans for Normal Inspection (Master Table).


SampleSample

size

Cumulative

samplesize


0.010 0.015 0.025 0.040 0.065 0.10 0.15 0.25 0.40 0.65 1.0 1.5 2.5 4.0 6.5 10 15 25 40 65 100 150 250 400 650 10


ABC

++++++

++++

++++

++++

++++

++++

++++

++++

++++

+

D FirstSecondThird

FourthFifthSixthSeventh

222

2222

246

8101214

# 2# 20 2

0 31 31 32 3

# 20 30 3

1 42 43 54 5

# 30 31 4

2 53 64 66 7

# 41 52 6

3 75 87 99 10

0 41 63 8

5 107 11

10 1213 14

0 53 86 10

8 1311 1514 1718 19

1 74 108 13

12 1717 2021 2325 26

2 97 14

13 19

19 2525 2931 3337 38

4 1211 1919 27

27 3436 4045 4753 54

6 1617 2729 39

40 4953 5865 6877 78

E FirstSecondThirdFourthFifthSixthSeventh

3333333

36912151821

# 2# 20 20 31 31 32 3

# 20 30 31 42 43 54 5

# 30 31 42 53 64 66 7

# 41 52 63 75 87 99 10

0 41 63 85 107 11

10 1213 14

0 53 86 108 13

11 1514 1718 19

1 74 108 13

12 1717 2021 2325 26

2 97 14

13 1919 2525 2931 3337 38

4 1211 1919 2727 3436 4045 4753 54

6 1617 2729 3940 4953 5865 6877 78

F FirstSecondThirdFourthFifthSixthSeventh

5555555

5101520253035

# 2# 20 20 31 31 32 3

# 20 30 31 42 43 54 5

# 30 31 42 53 64 66 7

# 41 52 63 75 87 99 10

0 41 63 85 107 11

10 1213 14

0 53 86 108 13

11 1514 1718 19

1 74 108 13

12 1717 2021 2325 26

2 97 14

13 1919 2525 2931 3337 38

G FirstSecondThirdFourthFifthSixthSeventh

8888888

8162432404856

# 2# 20 20 31 31 32 3

# 20 30 31 42 43 54 5

# 30 31 42 53 64 66 7

# 41 52 63 75 87 99 10

0 41 63 85 107 11

10 1213 14

0 53 86 108 13

11 1514 1718 19

1 74 108 13

12 1717 2021 2325 26

2 97 14

13 1919 2525 2931 3337 38

H FirstSecondThirdFourthFifthSixthSeventh

13131313131313

13263952657891

# 2# 20 20 31 31 32 3

# 20 30 31 42 43 54 5

# 30 31 42 53 64 66 7

# 41 52 63 75 87 99 10

0 41 63 85 107 11

10 1213 14

0 53 86 108 13

11 1514 1718 19

1 74 108 13

12 1717 2021 2325 26

2 97 14

13 1919 2525 2931 3337 38

J FirstSecondThird

FourthFifthSixthSeventh

202020

20202020

204060

80100120140

# 2# 20 2

0 31 31 32 3

# 20 30 3

1 42 43 54 5

# 30 31 4

2 53 64 66 7

# 41 52 6

3 75 87 99 10

0 41 63 8

5 107 1110 1213 14

0 53 86 10

8 1311 1514 1718 19

1 74 108 13

12 1717 2021 2325 26

2 97 14

13 19

19 2525 2931 3337 38

= Use first sampling plan below arrow (refer to continuation of table on following page, when necessary). If sample size equals or exceeds lot or batch size, do 100 percent inspection. = Use first sampling plan above ar

= Use corresponding single sampling plan (or alternatively, use double sampling plan below, where available). Ac = Acceptance number. Re = Rejection number.++ = Use corresponding double sampling plan (or alternatively, use multiple sampling plan below, where available). # = Acceptance not permitted at this sample size.


12/19

Table IV- A. (continued).Sample

sizecodeletter

SampleSample

size

Cumulative

samplesize

Acceptable Quality Levels (norm

0.010 0.015 0.025 0.040 0.065 0.10 0.15 0.25 0.40 0.65 1.0 1.5 2.5 4.0

Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re A

K FirstSecond

ThirdFourthFifthSixthSeventh

3232

3232323232

3264

96128160192224

# 2# 2

0 20 31 31 32 3

# 20 3

0 31 42 43 54 5

# 30 3

1 42 53 64 66 7

# 41 5

2 63 75 87 99 10

0 41 6

3 85 107 11

10 1213 14

0 53 8

6 108 1311 1514 1718 19

1122

L FirstSecondThirdFourthFifthSixthSeventh

50505050505050

50100150200250300350

# 2# 20 20 31 31 32 3

# 20 30 31 42 43 54 5

# 30 31 42 53 64 66 7

# 41 52 63 75 87 99 10

0 41 63 85 107 11

10 1213 14

0 53 86 108 13

11 1514 1718 19

1 74 108 13

12 1717 2021 2325 26

11233

M FirstSecondThirdFourthFifthSixthSeventh

80808080808080

80160240320400480560

# 2# 20 20 31 31 32 3

# 20 30 31 42 43 54 5

# 30 31 42 53 64 66 7

# 41 52 63 75 87 99 10

0 41 63 85 107 11

10 1213 14

0 53 86 108 13

11 1514 1718 19

1 74 108 13

12 1717 2021 2325 26

2 97 14

13 1919 2525 2931 3337 38

N FirstSecondThirdFourth

FifthSixthSeventh

125125125125

125125125

125250375500

625750875

# 2# 20 20 3

1 31 32 3

# 20 30 31 4

2 43 54 5

# 30 31 42 5

3 64 66 7

# 41 52 63 7

5 87 99 10

0 41 63 85 10

7 1110 1213 14

0 53 86 108 13

11 1514 1718 19

1 74 108 13

12 17

17 2021 2325 26

2 97 14

13 1919 25

25 2931 3337 38

P FirstSecondThirdFourthFifthSixth

200200200200200200

20040060080010001200

# 2# 20 20 31 31 3

# 20 30 31 42 43 5

# 30 31 42 53 64 6

# 41 52 63 75 87 9

0 41 63 85 107 11

10 12

0 53 86 108 13

11 1514 17

1 74 108 13

12 1717 2021 23

2 97 14

13 1919 2525 2931 33


13/19

Table IV- B. Multiple Sampling Plans for Tightened Inspection (Master Table).


SampleSample

size

Cumulative

samplesize


0.010 0.015 0.025 0.040 0.065 0.10 0.15 0.25 0.40 0.65 1.0 1.5 2.5 4.0 6.5 10 15 25 40 65 100 150 250 400 650 10


ABC

++

++++

++++

++++

++++

++++

++++

++++

++++

+

D FirstSecondThirdFourthFifthSixthSeventh

2222222

2468101214

# 2# 20 20 31 31 32 3

# 20 30 31 42 43 54 5

# 30 31 42 53 64 66 7

# 41 52 63 75 87 99 10

0 42 74 96 119 12

12 1414 15

0 63 97 12

10 1514 1718 2021 22

1 86 12

11 1716 2222 2527 2932 33

3 1010 1717 2424 3132 3740 4348 49

6 1516 2526 3637 4649 5561 6472 73

E FirstSecondThirdFourthFifthSixthSeventh

3333333

36912151821

# 2# 20 20 31 31 32 3

# 20 30 31 42 43 54 5

# 30 31 42 53 64 66 7

# 41 52 63 75 87 99 10

0 42 74 96 119 12

12 1414 15

0 63 97 12

10 1514 1718 2021 22

1 86 12

11 1716 2222 2527 2932 33

3 1010 1717 2424 3132 3740 4348 49

6 1516 2526 3637 4649 5561 6472 73


5555555

5101520253035

# 2# 20 20 31 31 32 3

# 20 30 31 42 43 54 5

# 30 41 42 53 64 66 7

# 41 52 63 75 87 99 10

0 42 74 96 119 12

12 1414 15

0 63 97 12

10 1514 1718 2021 22

1 86 12

11 1716 2222 2527 2932 33


8888888

8162432404856

# 2# 20 20 31 31 32 3

# 20 30 31 42 43 54 5

# 30 41 42 53 64 66 7

# 41 52 63 75 87 99 10

0 42 74 96 119 12

12 1414 15

0 63 97 12

10 1514 1718 2021 22

1 86 12

11 1716 2222 2527 2932 33


13131313131313

13263952657891

# 2# 20 20 31 31 32 3

# 20 30 31 42 43 54 5

# 30 41 42 53 64 66 7

# 41 52 63 75 87 99 10

0 42 74 96 119 12

12 1414 15

0 63 97 12

10 1514 1718 2021 22

1 86 12

11 1716 2222 2527 2932 33

J FirstSecondThirdFourth

FifthSixthSeventh

20202020

202020

20406080

100120140

# 2# 20 20 3

1 31 32 3

# 20 30 31 4

2 43 54 5

# 30 41 42 5

3 64 66 7

# 41 52 63 7

5 87 99 10

0 42 74 96 11

9 1212 1414 15

0 63 97 12

10 15

14 1718 2021 22

1 86 12

11 1716 22

22 2527 2932 33


= Use corresponding single sampling plan (or alternatively, use double sampling plan below, where available). Ac = Acceptance number. Re = Rejection number.++ = Use corresponding double sampling plan (or alternatively, use multiple sampling plan below, where available). # = Acceptance not permittedat this sample size.


14/19

Table IV- B. (continued).


SampleSample

size

Cumulative

samplesize


0.010 0.015 0.025 0.040 0.065 0.10 0.15 0.25 0.40 0.65 1.0 1.5 2.5 4.0 6.5 10 15 25 40 65 100 150 250 400 650 10


K FirstSecondThirdFourthFifthSixthSeventh

32323232323232

326496128160192224

# 2# 20 20 31 31 32 3

# 20 30 31 42 43 54 5

# 30 41 42 53 64 66 7

# 41 52 63 75 87 99 10

0 42 74 96 119 12

12 1414 15

0 63 97 12

10 1514 1718 2021 22

1 86 12

11 1716 2222 2527 2932 33


50505050505050

50100150200250300350

# 2# 20 20 31 31 32 3

# 20 30 31 42 43 54 5

# 30 41 42 53 64 66 7

# 41 52 63 75 87 99 10

0 42 74 96 119 12

12 1414 15

0 63 97 12

10 1514 1718 2021 22

1 86 12

11 1716 2222 2527 2932 33


80808080808080

80160240320400480560

# 2# 20 20 31 31 32 3

# 20 30 31 42 43 54 5

# 30 41 42 53 64 66 7

# 41 52 63 75 87 99 10

0 42 74 96 119 12

12 1414 15

0 63 97 12

10 1514 1718 2021 22

1 86 12

11 1716 2222 2527 2932 33

N FirstSecondThirdFourthFifthSixthSeventh

125125125125125125125

125250375500625750875

# 2# 20 20 31 31 32 3

# 20 30 31 42 43 54 5

# 30 41 42 53 64 66 7

# 41 52 63 75 87 99 10

0 42 74 96 119 12

12 1414 15

0 63 97 12

10 1514 1718 2021 22

1 86 12

11 1716 2222 2527 2932 33

P FirstSecondThirdFourthFifthSixthSeventh

200200200200200200200

200400600800

100012001400

# 2# 20 20 31 31 32 3

# 20 30 31 42 43 54 5

# 30 41 42 53 64 66 7

# 41 52 63 75 87 99 10

0 42 74 96 119 12

12 1414 15

0 63 97 12

10 1514 1718 2021 22

1 86 12

11 1716 2222 2527 2932 33

Q FirstSecondThirdFourthFifthSixthSeventh

315315315315315315315

315630945

1260157518902205

# 2# 20 20 31 31 32 3

# 20 30 31 42 43 54 5

# 30 41 42 53 64 66 7

# 41 52 63 75 87 99 10

0 42 74 96 119 12

12 1414 15

0 63 97 12

10 1514 1718 2021 22

1 86 12

11 1716 2222 2527 2932 33

R FirstSecondThirdFourthFifth

SixthSeventh

500500500500500

500500

5001000150020002500

30003500

# 2# 20 20 31 3

1 32 3

# 20 30 31 42 4

3 54 5

# 30 41 42 53 6

4 66 7

# 41 52 63 75 8

7 99 10

0 42 74 96 119 12

12 1414 15

0 63 97 12

10 1514 17

18 2021 22

1 86 12

11 1716 2222 25

27 2932 33

S FirstSecondThirdFourthFifthSixthSeventh

800800800800800800800

800160024003200400048005600

# 2# 20 20 31 31 32 3


15/19

Table IV- C. Multiple Sampling Plans for Reduced Inspection (Master Table).


SampleSample

size

Cumulative

samplesize


0.010 0.015 0.025 0.040 0.065 0.10 0.15 0.25 0.40 0.65 1.0 1.5 2.5 4.0 6.5 10 15 25 40 65 100 150 250 400 650 10


ABCDE

++

++++

++++

++++

++++

++++

++++

++++

++++

++++

++


2222222

2468101214

# 2# 20 20 30 30 31 3

# 2# 30 30 40 41 51 5

# 3# 30 40 51 61 62 7

# 30 40 51 62 73 74 8

# 40 51 62 73 84 96 10

# 41 62 83 105 117 129 14

0 51 73 95 127 13

10 1513 17

0 63 96 128 15

11 1714 2018 22


3333333

36912151821

# 2# 20 20 30 30 31 3

# 2# 30 30 40 41 51 5

# 3# 30 40 51 61 62 7

# 30 40 51 62 73 74 8

# 40 51 62 73 84 96 10

# 41 62 83 105 117 129 14

0 51 73 95 127 13

10 1513 17

0 63 96 128 15

11 1714 2018 22


5555555

5101520253035

# 2# 20 20 30 30 31 3

# 2# 30 30 40 41 51 5

# 3# 30 40 51 61 62 7

# 30 40 51 62 73 74 8

# 40 51 62 73 84 96 10

# 41 62 83 105 117 129 14

0 51 73 95 127 13

10 1513 17

0 63 96 128 15

11 1714 2018 22

J FirstSecondThirdFourthFifthSixthSeventh

8888888

8162432404856

# 2# 20 20 30 30 31 3

# 2# 30 30 40 41 51 5

# 3# 30 40 51 61 62 7

# 30 40 51 62 73 74 8

# 40 51 62 73 84 96 10

# 41 62 83 105 117 129 14

0 51 73 95 127 13

10 1513 17

0 63 96 128 15

11 1714 2018 22

K FirstSecondThirdFourthFifth

SixthSeventh

1313131313

1313

1326395265

7891

# 2# 20 20 30 3

0 31 3

# 2# 30 30 40 4

1 51 5

# 3# 30 40 51 6

1 62 7

# 30 40 51 62 7

3 74 8

# 40 51 62 73 8

4 96 10

# 41 62 83 105 11

7 129 14

0 51 73 95 127 13

10 1513 17

0 63 96 128 15

11 17

14 2018 22


= Use corresponding single sampling plan (or alternatively, use double sampling plan below, where available). Ac = Acceptance number. Re = Rejection number.++ = Use corresponding double sampling plan (or alternatively, use multiple sampling plan below, where available). # = Acceptance not permitted at this sample size. = If, after the final sample, the acceptance number has been exceeded but the rejection number has not been reached, accept the lot but reinstate normal inspection.


16/19

Table IV- C. (continued).


SampleSample

size

Cumulative

samplesize


0.010 0.015 0.025 0.040 0.065 0.10 0.15 0.25 0.40 0.65 1.0 1.5 2.5 4.0 6.5 10 15 25 40 65 100 150 250 400 650 10



20202020202020

20406080

100120140

# 2# 20 20 30 30 31 3

# 2# 30 30 40 41 51 5

# 3# 30 40 51 61 62 7

# 30 40 51 62 73 74 8

# 40 51 62 73 84 96 10

# 41 62 83 105 117 129 14

0 51 73 95 127 13

10 1513 17

0 63 96 128 15

11 1714 2018 22


32323232323232

326496

128160192224

# 2# 20 20 30 30 31 3

# 2# 30 30 40 41 51 5

# 3# 30 40 51 61 62 7

# 30 40 51 62 73 74 8

# 40 51 62 73 84 96 10

# 41 62 83 105 117 129 14

0 51 73 95 127 13

10 1513 17

0 63 96 128 15

11 1714 2018 22

N FirstSecondThirdFourthFifthSixthSeventh

50505050505050

50100150200250300350

# 2# 20 20 30 30 31 3

# 2# 30 30 40 41 51 5

# 3# 30 40 51 61 62 7

# 30 40 51 62 73 74 8

# 40 51 62 73 84 96 10

# 41 62 83 105 117 129 14

0 51 73 95 127 13

10 1513 17

0 63 96 128 15

11 1714 2018 22

P FirstSecond

ThirdFourthFifthSixthSeventh

8080

8080808080

80160

240320400480560

# 2# 2

0 20 30 30 31 3

# 2# 3

0 30 40 41 51 5

# 3# 3

0 40 51 61 62 7

# 30 4

0 51 62 73 74 8

# 40 5

1 62 73 84 96 10

# 41 6

2 83 105 117 129 14

0 51 7

3 95 127 13

10 1513 17

0 63 9

6 128 15

11 1714 2018 22

Q FirstSecondThirdFourthFifthSixthSeventh

125125125125125125125

125250375500625750875

# 2# 20 20 30 30 31 3

# 2# 30 30 40 41 51 5

# 3# 30 40 51 61 62 7

# 30 40 51 62 73 74 8

# 40 51 62 73 84 96 10

# 41 62 83 105 117 129 14

0 51 73 95 127 13

10 1513 17

0 63 96 128 15

11 1714 2018 22

R FirstSecondThirdFourthFifth

SixthSeventh

200200200200200

200200

200400600800

1000

12001400

# 2# 20 20 30 3

0 31 3

# 2# 30 30 40 4

1 51 5

# 3# 30 40 51 6

1 62 7

# 30 40 51 62 7

3 74 8

# 40 51 62 73 8

4 96 10

# 41 62 83 105 11

7 129 14

0 51 73 95 127 13

10 1513 17

0 63 96 128 15

11 17

14 2018 22


= Use corresponding single sampling plan (or alternatively, use double sampling plan below, where available). Ac = Acceptance number. Re = Rejection number.++ = Use corresponding double sampling plan (or alternatively, use multiple sampling plan below, where available). # = Acceptance not permitted at this sample size. = If, after the final sample, the acceptance number has been exceeded but the rejection number has not been reached, accept the lot but reinstate normal inspection.


17/19

Table V-A. Average Outgoing Quality Limit Factors for Normal Inspection (Single Sampling) *

CodeLetter

Samplesize

Acceptable Quality Level

0.010 0.015 0.025 0.040 0.065 0.10 0.15 0.25 0.40 0.65 1.0 1.5 2.5 4.0 6.5 10 15 25 40 65 100 150 250 400 650 1

A

B

C

2

3

5 7.4

12

18

17

28

27

42

46

39

69

65

63

97

110

90

160

150

130

220

220

190

330

310

290

470

490

430

730

720

660

1

1

D

E

F

8

13

20 1.8

2.8

4.6

4.2

6.5

6.9

11

11

9.7

17

15

16

24

24

22

40

34

33

56

50

47

82

72

73

120

110

180

170

270

250

410

G

H

J

32

50

80 0.46

0.74

1.2

1.1

1.7

1.7

2.6

2.7

2.4

4.3

3.9

4.0

6.1

6.3

5.6

9.9

9.0

8.2

14

13

12

21

19

18

29

29

46

K

L

M

125

200

315 0.12

0.18

0.29

0.27

0.42

0.44

0.67

0.69

0.62

1.1

0.97

1.00

1.6

1.6

1.4

2.5

2.2

2.1

3.6

3.3

3.0

5.2

4.7

4.7

7.5

7.3

12

N

P

Q

500

800

1250 0.029

0.046

0.074

0.067

0.11

0.11

0.17

0.17

0.16

0.27

0.24

0.25

0.39

0.40

0.36

0.63

0.56

0.52

0.90

0.82

0.75

1.3

1.2

1.2

1.9

1.8

2.9

R 2000 0.042 0.069 0.097 0.16 0.22 0.33 0.47 0.73

* Note: For the exact AOQL, the above volume must be multiplied by

sizeBatchorLot

sizeSample1


18/19

Table V-B. Average Outgoing Quality Limit Factors for Tightened Inspection (Single Sampling) *

CodeLetter

Samplesize


0.010 0.015 0.025 0.040 0.065 0.10 0.15 0.25 0.40 0.65 1.0 1.5 2.5 4.0 6.5 10 15 25 40 65 100 150 250 400 650 1

A

B

C

2

3

5 7.4

12

17

28

27

42

46

39

69

65

63

97

110

100

160

170

160

260

270

250

400

410

390

620

650

610

1

D

E

F

8

13

20 1.8

2.8

4.6

4.2

6.5

6.9

11

11

9.7

17

15

16

24

24

26

40

40

40

64

61

62

99

95

160

150

240

240

380

G

H

J

32

50

80 0.46

0.74

1.2

1.1

1.7

1.7

2.6

2.7

2.4

4.3

3.9

4.0

6.1

6.3

6.4

9.9

10

9.9

16

16

16

25

25

39

K

L

M

125

200

315 0.12

0.18

0.29

0.27

0.42

0.44

0.67

0.69

0.62

1.1

0.97

1.0

1.6

1.6

1.6

2.5

2.6

2.5

4.1

4.0

3.9

6.4

6.2

9.9

N

P

Q

500

800

1250 0.029

0.046

0.074

0.067

0.11

0.11

0.17

0.17

0.16

0.27

0.24

0.25

0.39

0.40

0.41

0.63

0.64

0.64

1.0

0.99

0.99

1.6

1.6

2.5

R

S

2000

3150

0.018

0.027

0.042 0.069 0.097 0.16 0.26 0.40 0.62

* Note: For the exact AOQL, the above volume must be multiplied by

sizeBatchorLot

sizeSample1


19/19

Table VIII. Limit Numbers for Reduced Inspection.

Number ofsample units


from last 10lots or batches 0.010 0.015 0.025 0.040 0.065 0.10 0.15 0.25 0.40 0.65 1.0 1.5 2.5 4.0 6.5 10 15 25 40 65 100 150 250 400 650 1

20- 2930- 49

50- 79

0

0

0

00

2

01

3

23

7

47

14

813

25

1422

40

2236

63

4063

110

68105

181

115178

301

12

80- 129130 - 199200 - 319

0

00

002

024

248

4714

71322

142540

244268

4272115

68115181

105177277

181301471

297490

320- 499500- 799800 - 1249

0

00

002

024

137

4714

81424

142542

244068

3963105

68110181

113181

189

1250- 19992000- 31493150- 4999

0

00

001

024

248

4814

71424

132238

244067

4068111

69115186

110181

169

5000- 79998000- 1249912500- 19999

0

00

002

024

247

3713

71424

142440

254269

4068110

63105169

110181

181

20000- 3149931500- 4999950000 & over

002

013

247

4814

81425

142440

223863

4067110

68111181

115186301

181

Denotes that the number of sample units from the last ten lots or batches is not sufficient for reduced inspection for this AQL. In this instance more than ten lots or batches may be used for the calculation, provided that the lots

batches used are the most recent ones in sequence, that they have all been on normal inspection, and that none has been rejected while on original inspection.

Documents

Table Mil Std 105e