Upload
jfman
View
242
Download
0
Embed Size (px)
Citation preview
8/11/2019 TDS Pattex Repair Extreme 031223
1/2
Technical Data Sheet
Pattex Repair Extreme
High Performance Elastic AdhesiveSuper Multi-Purpose
I. Product:
Nature of product:
Silane cross-linking polymer
Field of application:
Bonding of absorbent surfaces,e.g. wood, leather (shoe repair),concrete, mortar, stone, furniture,textile.
Bonding of non adsorbentsurfaces e.g. metal, glass,polystyrene foam, varnished
surfaces, PVC, glass, mirror,rubber.
Package size:
Tube of 20g.
Shipping unit:
PRX12 = 12 tubes per unit
II.Characteristics: Will bond two non-absorbent
surfaces together
Adhesion on many differentsubstrates
Good final strength
Vibration-resistant
Flexible
Gap filling
Safe and easy to use
Solvent-free, no shrinkage
1-component, moisture-curing
For interior and exterior application
Not suitable for polypropylenepolyethylene, Teflon
Final strength:
Appr. 3.0 N/mm
Gap filling tolerance:
Max. 5 mm
Density:
Approx. 1.0 g/cm (at +25C)
Colour:
translucent
Application temperature:
From +5C to +40C
Open time:
Approx. 5 min.
Setting time:
2 mm per 24 hrs., depending ontemperature and humidity conditions
Extension at break:
Approx. 200%
Temperature resistance:From -50C up to +120C
Bonding resistance:
Ageing-, weather- and moisture-resistant
23.12.2003
8/11/2019 TDS Pattex Repair Extreme 031223
2/2
III. Directions foruse:
Application surface:
Pattex Repair Exteme is suitable formany absorbent and non-absorbentsurfaces, except polyethylene,polystyrene, Teflon. Allcombinations of the recommended
surfaces are possible.
Surface preparation:
To ensure good adhesion, somemoisture is needed (from one of thesurfaces or from the air do not applywater to the substrate).
The surfaces must be sound andclean.
Remove contaminants, e.g. dust,grease, oil or rust with alcohol,acetone and/or sand-paper.
Check bonding strength betweencoverings and the substrate, removeloose varnishes.
Application:
Three different ways of using
1. Transparent bonding.
Apply Pattex Repair Extrem in a thinlayer to get a transparent film. Keepthe items pressed for approx.1 hour.
2. Fill gaps.
Apply Pattex Repair Extrem in athick layer to fill gaps up to 5mm max.Clamp the items together for 1 3hours and do not touch or move them.In 24 hours, 70% of the full adhesionstrength is achieved.
3. High initial grip.
Apply Pattex Repair Extreme onboth surfaces in thin and even layers.Leave for 4 9 minutes. Use as acontact adhesive. After PattexRepair Extreme become tacky, likepressure sensitive tape, gain theitems together immediately and pressfirmly. Fixation is not necessary inmany cases.
Further information:
After setting, Pattex Repair Extremecan be painted.
Pattex Repair Extremeshould not beused for sealing of glass that isexposed to both UV light andmoisture.
The product cures very fast in highhumidity.
Keep the nozzle and the cap of thetube clean.
Put the cap back on immediately afterapplying the glue. Twist the cap tightto avoid curing in the nozzle.
IV. Importantremarks:
Cleaning tools:
Clean tools with acetone or alcoholimmediately after use. Cured material
can only be removed mechanically.
Shelf life:
Up to 12 months in unopenedcontainer.
Storage:
Store in a cool, dry place. Avoid direct
sunlight.
Removal of adhesive
remnants:
Fresh Pattex Repair Extremecan beeasily removed with a dry cloth.Uncured adhesive is removable withacetone or alcohol.
Note: Pattex Repair Extremecan notbe removed from clothing.
The cured adhesive is not soluble inany solvent and can only be removedmechanically with a suitable tool.
Precautionary measures:-Keep out of reach of children
-If skin contact occurs , removeimmediately and wash with soap andwater.
The above instructions are based on thorough trials and on general experience gained in this field. As it is impossible to survey allinstallation methods and in view of various different working conditions, we cannot, however, claim that the information given iscomplete. We therefore recommend that tests should be carried out on your own to ensure the greatest possible success. Weguarantee a uniform quality standard for this product.
Henkel KGaA
23.12.2003