Upload
doanthuan
View
217
Download
0
Embed Size (px)
Citation preview
Introduction 2 - 3
Contents
ML2000 Series
• SOCKET OUTLETS 8 - 11
• SOCKET OUTLETS - CLEANER 10
• SOCKET OUTLETS - RCD PROTECTED 11
AS/NZS3003 Electrical Installations
PATIENT TREATMENT AREAS 5
ML2031RC Series
RESIDUAL CURRENT DEVICES 6
ML2031E08
AUDIBLE/VISUAL ALARMS 7
ML2000R0 Series
EQUIPOTENTIAL EARTH STUDS 12
ML2031EU
GAS OUTLET ADAPTOR PLATE 13
2000 Series
CLIPSAL ACCESSORIES 14 - 15
2000 Series
OEM ACCESSORIES 16
ML2000 Series
THE SIMPLE AND ECONOMICAL ALTERNATIVE 4
Hospitals have undergone a dramatic
transformation in the past 20 years. The
development of less intrusive medical techniques
has meant that patient recovery times have been
greatly reduced. As a result, day surgery clinics are
now a feature of almost every hospital.
Hospital environments are now less intimidating
too. No longer clinical and antiquated, patient
accommodation is often of hotel standard. And
although there is a greater reliance on hi tech
support equipment, it is now designed to blend
with the surroundings to create a more relaxed
environment for both patients and medical staff.
The Medilec Range of hospital equipment is
designed to meet this growing demand for
hospital services and equipment that are
more attractive and less intimidating.
Introduction
EC
ON
OM
ICA
L A
LT
ER
NA
TIV
EM
L20
00
Se
rie
s
ML2000 SERIES
Now an impressive part of the Medilec Range, the ML2000
Series is a complete range of Moulded Hospital Electrical
Accessories. The ML2000 Series is based on the Clipsal
2000 Series of electrical accessories but has additional
features to meet the special needs of hospital patient
treatment areas. As defi ned in AS/NZS3003 - “Electrical
installations: patient treatment areas of hospitals and
medical and dental practices”.
The ML2000 Series products, combined with the following
items, produce a very economical, reliable and modular
Medical Service Panel System that is not only quick and
easy to produce but also looks attractive.
Clipsal 2000 Series Surrounds and Mounting Boxes
or Brackets
Clipsal 2000 Electrical Accessories
OEM 2000 Series Nurse Call Points
OEM 2000 Series Gas Outlets
The s imple & economical alternative
MEETING HIGH STANDARDS
All the ML2000 Series electrical accessories comply with
the relevant Australian Standards for electrical safety (as
well as standards for patient treatment areas) including
AS/NZS3003 - “Electrical installations: patient treatment
areas of hospitals and medical and dental practices”,
and AS/NZS3190 - “Approval and test specifi cations for
residual current devices”.
4
AS/NZS3003. ELECTRICAL INSTALLATIONS: PATIENT
TREATMENT AREAS OF HOSPITALS AND MEDICAL AND
DENTAL PRACTICES
The ML2000 Series product range is designed to meet
the requirements of AS/NZS3003. AS/NZS3003 sets out
the specialist electrical installation requirements often
found in the following premises:
Hospitals
Medical Practices
Dental Practices
Physiotherapy Practices
The areas within these premises that would need to
meet AS/NZS 3003 are classifi ed as Body or Cardiac
Protected Areas. The procedures carried out to classify
these areas as Body or Cardiac Protected are as follows:
Within Body Protected Areas procedures are carried
out where a patient is connected to an item of
electromedical equipment which reduces the impedance
of the skin by either electrode paste or by the entrance
of conducting fl uids, metal needles, saline fi lled
catheters, etc.
Within Cardiac Protected Areas the same procedures
are carried out as in the Body Protected Areas but also
procedures where a patient has an electrical conductor
placed within the heart or is likely to come in contact
with the heart, eg. electrical wires such as cardiac pacing
electrodes and intracardiac ECG electrodes, or insulated
tubes fi lled with conducting fl uids.
Pa
tien
t trea
tme
nt a
rea
s E
LE
CT
RIC
AL
INS
TA
LL
AT
ION
S
5
RE
SID
UA
L C
UR
RE
NT
DE
VIC
ES
(R
CD
s)M
L20
31
RC
Se
rie
s
6
ML2031RC SERIES
The ML2031RC range of RCDs are based on the Clipsal
2031RC range of RCDs for maximum protection against
electrocution. The advantage of the ML2031RC range is that
they have been specially designed with an additional Line
Supply Power Indicator.
The ML2031RC Series RCDs are designed to operate at
10mA which meets the requirements of AS/NZS3003 -
“Electrical installations: patient treatment areas of
hospitals and medical and dental practices”, and
AS/NZS3190 - “Approval and test specifi cations for
residual current devices”.
Features
10mA trip current
Amber indicator marked “SUPPLY POWER AVAILABLE”
Red indicator marked “LINE POWER AVAILABLE”
Inbuilt test facility
RCD protection of GPOs down stream.
Residual Current Devices (RCDs)
Trip Current 10mATrip Time < 40msOperational Voltage 250V a.c. 50HzMaximum Load 20ADimensions 116 x 76mm (30mm rear projection plus wiring)Complies to AS/NZS3190Australian Standards AS/NZS3003Approval No. S/1/2031RC SeriesStandard Colours WE - White Electric RD - Red DB - Dark Blue
Specifi cations
ML2031RC10
ML2031VRC10
CATALOGUE NO. DESCRIPTION
ML2031VRC10 Single gang, double pole, vertical, 250V, 20A, 10mA RCD
ML2031RC10 Single gang, double pole, horizontal, 250V, 20A, 10mA RCD
Wiring Diagram
RCD
Complies to AS/NZS3190 and AS/NZS3112
ML2031E08
ML2031VE08
ML2
03
1E
08
Se
ries
AU
DIB
LE
/VIS
UA
L A
LA
RM
S
7
ML2031E08 SERIES
The ML2031E08 range of Audible/Visual Alarms have
been developed to work in conjunction with the
ML2031RC range of RCDs. When the RCD trips it sets off
an audible and visual indicator. The advantage is that
it provides an excellent means of alerting hospital staff
whenever the RCD has actually tripped.
Features
Multiple 2 tone audible alarm indication
Flashing red visual alarm indication
Mute push-button marked “PRESS TO MUTE”
Audible/Visual Alarms
Operational Voltage 250V a.c. 50HzDimensions 116 x 76mm (34mm rear projection plus wiring)Complies to AS/NZS3100Australian Standard Approval No. SC/975/SStandard Colours WE - White Electric RD - Red DB - Dark Blue
Specifi cations
ML2031VE08 Single gang, vertical, audible/visual alarm, 250V
ML2031E08 Single gang, horizontal, audible/visual alarm, 250V
Wir ing Diagram
CATALOGUE NUMBER DESCRIPTION
ML2000 SERIES
As with other ML2000 Series products, the range of
Socket Outlets is based on the Clipsal 2000 Series but
with additional features to meet the special needs of
hospital patient treatment areas. As defi ned in
AS/NZS3003 - “Electrical installations: patient treatment
areas of hospitals and medical and dental practices”.
When installing a group of socket outlets ideally one
ML2000 socket outlet plate should be used with the
remaining being standard Clipsal socket outlets. The
one ML2000 socket outlet plate will incorporate the
amber Power Available Neon, Circuit Identifi cation,
and protection classifi cation markings for the group of
socket outlets.
Features
Socket Outlets – connected to RCD Protected Supply:
Single or twin outlet
10 or 15 Amp
Single pole switched outlets
Marked “RCD PROTECTED”
Amber Power Available indicator
Optional Clipsal 30PID circuit identifi cation
Socket Outlets – connected to an Isolated
Protected Supply:
Single or twin outlet
Double pole switched outlets
10 Amp
Marked “ISOLATING TRANSFORMER PROTECTED”
Optional Clipsal 30PID circuit identifi cation
Note:
Not all variations are available. Refer to catalogue
number listing for exact options.
Socket Outlets
ML2015 Single outlet, horizontal, power neon, RCD label, 250V, 10A
ML2015I Single outlet, horizontal, power neon, RCD label, circuit identifi cation, 250V, 10A
ML2015/15I Single outlet, horizontal, power neon, RCD label, circuit identifi cation, 250V, 15A
ML2015D Single double pole outlet, horizontal, isolated label, 250V, 10A
ML2025 Double outlet, horizontal, power neon, RCD label, 250V, 10A
ML2025I Double outlet, horizontal, power neon, RCD label, circuit identifi cation, 250V, 10A
CATALOGUE NO. DESCRIPTION
ML2015V Single outlet, vertical, power neon, RCD label, 250V, 10A
ML2015VI Single outlet, vertical, power neon, RCD label, circuit identifi cation, 250V, 10A
ML2015/15VI Single outlet, vertical, power neon, RCD label, circuit identifi cation, 250V, 15A
ML2015VD Single double pole outlet, vertical, isolated label, 250V, 10A
ML2015VDI Single double pole outlet, vertical, isolated label, circuit identifi cation, 250V, 10A
ML2025V Double outlet, vertical, power neon, RCD label, 250V, 10A
ML2025VI Double outlet, vertical, power neon, RCD label, circuit identifi cation, 250V, 10A
ML2025VD Double double pole outlet, vertical, isolated label, 250V, 10A
Vert ical
Horizontal
ML2
00
0 S
erie
sS
OC
KE
T O
UT
LE
TS
9
ML2015VD
ML2025VD
ML2015/15VI
ML2025VI
ML2015VI
ML2025V
ML2015V
ML2015VDIML2025I
ML2015D
ML2015I
ML2025
ML2015/15I
ML2015
Operational Voltage 250V a.c. 50HzMaximum load 10 or 15 AmpsDimensions 116 x 76mm Complies to Australian Standard AS/NZS3112Approval No. S/1/2025 Series, S/1/2015 SeriesStandard Colours WE - White Electric, RD - Red, DB - Dark Blue
Specifi cations
CATALOGUE NO. DESCRIPTION
ML2015C Single gang power outlet, horizontal, Cleaner label, 250V, 10A
ML2015/15C Single gang power outlet, horizontal, Cleaner label, 250V, 15A
ML2025C Double gang power outlet, horizontal, Cleaner label, 250V, 10A
SO
CK
ET
OU
TL
ET
SM
L20
00
C S
eri
es
10
Socket Outlets - CleanerML2000C SERIES
The ML2000C range of socket outlets are clearly
identifi able cleaner socket outlets as defi ned in AS/NZS
3003 “Electrical installations: patient treatment areas of
hospitals and medical and dental practices”. The cleaner
socket outlets are used to connect mains powered
cleaning equipment to dedicated cleaner power circuits.
FEATURES
Single or twin outlet
10 or 15 Amp
Single pole switched
Marked “CLEANING PURPOSES ONLY”
Beige in colour
Operational Voltage 250V a.c. 50Hz
Maximum load 10 or 15 Amps
Dimensions 116 x 76mm
Complies to AS/NZS 3112, AS/NZS 3003Australian Standard
Standard Colours BG - Beige
Specifi cations
ML2015/15C
ML2015C
ML2025C
ML2
025RC
Se
ries
SO
CK
ET
OU
TLETS
11
ML2025RC SERIES
The compact ML2025RC10 incorporates a double socket
outlet and an RCD for maximum protection against
electrocution, on a single grid plate.
The ML2025RC10 RCD is designed to operate at 10mA
which meets the requirements of AS/NZS 3003 “Electrical
installations: patient treatment areas of hospitals and
medical and dental practices”.
FEATURES
10mA trip current
Twin 10A switched outlets
Amber indicator marked “POWER AVAILABLE”
Inbuilt test facility
RCD protection of GPO’s down stream
Standard versions marked “RCD PROTECTED” while
Cleaner versions marked “CLEANING PURPOSES ONLY”.
CATALOGUE NO. DESCRIPTION
ML2025RC10 Double gang power outlet, 250V, 10A, 10mA RCD
ML2025RC10C Double gang power outlet, Cleaner label, 250V, 10A, 10mA, RCD
Specifi cations
Trip Current 10mA
Trip Time < 40ms
Operational Voltage 250V a.c. 50Hz
Max load 10 Amps
Dimensions 116 x 76mm (30mm rear projection plus wiring)
Complies to AS/NZS 3190, AS/NZS 3003Australian Standard
Colours ML2025RC10
WE – White Electric RD – Red DB – Dark Blue
ML2025RC10C
BG – Beige
Socket Outlets - RCD Protected
ML2025RC10
ML2025RC10C
Wir ing Diagram
RCD
Complies to AS/NZS3190 and AS/NZS3112
EQ
UIP
OTE
NTI
AL
EA
RTH
STU
DS
ML2
00
0R
0 S
eri
es
12
ML2031VR01 Single gang, vertical, EP stud
ML2032VR02 Double gang, vertical, EP stud
ML2031R01 Single gang, horizontal, EP stud
ML2032R02 Double gang, horizontal, EP stud
CATALOGUE NO. DESCRIPTION
Dimensions 116 x 76mm (23mm rear projection)Complies to Australian Standard AS/NZS3003
Standard Colours WE – White Electric RD – Red DB – Dark Blue
Specifi cations
ML2000R0 SERIES
The ML2031R0 & ML2032R0 ranges of Equipo-
tential (EP) Earthing Studs have been developed
to meet the relevant requirements of EP Earthing
within hospitals as detailed AS/NZ3003 - “Electrical
installations: patient treatment areas of hospitals
and medical and dental practices”.
Features
Single or Twin EP Stud
EP Stud clearly identifi ed in colour green
Screw clamping system for effective EP
Earthing connections
Equipotential Earth Studs
ML2031VR01
ML2032VR02
ML2031R01
ML2032R02
ML2
03
1E
U S
erie
sG
AS
OU
TL
ET
AD
AP
TO
R P
LA
TE
13
ML2031EU
The ML2031EU Gas Outlet Adaptor Plate has been
developed to allow the ESCO MEDICON range of gas
outlets to fi t to the ML2000 Series system. The blank
grid plate is pre-drilled with convenient mounting
holes to allow the Gas Outlet to be fi tted vertically
or horizontally.
Note: The plate does not accept the ESCO MEDICON
Venturi Suction and Venturi Gas Outlets.
ML2031EU Single gang grid plate
CATALOGUE NO. DESCRIPTION
Gas Outlet Adaptor Plate
ML2031EU
Standard Colours WE – White Electric RD – Red DB – Dark Blue
Specifi cations
CL
IPS
AL
AC
CE
SS
OR
IES
2000
Se
rie
s
14
The ML2000 Series is based on the Clipsal 2000 Series
therefore the Medical Service Panels will incorporate
some of the Clipsal 2000 Series products. Detailed below
is a list of some of the more common Clipsal 2000
Series products.
Please refer to the Clipsal Trade Product Guide for a
complete listing of the Clipsal 2000 Series accessories.
Cl ipsal 2000 Series
Technical Data
Surrounds2000 1 gang, surround (116x76mm)2000/2 2 gang, vertical, surround (116 x 144mm)2000/3 3 gang, vertical, surround (116 x 219mm)2000/4 4 gang, vertical, surround (116 x 290mm)2000H2 2 gang, horizontal, surround (76 x 229mm)2000H3 3 gang, horizontal, surround (76 x 342mm)
Wall Boxes157 1 gang, wall box2157/2 2 gang, vertical, wall box2157/3 3 gang, vertical, wall box2157/4 4 gang, vertical, wall box2157H2 2 gang, horizontal, wall box2157H3 3 gang, horizontal, wall box
Mounting Brackets WALL BOARD154 1 gang, wall board mounting clip2154/2 2 gang, vertical, wall board mounting clip2154/3 3 gang, vertical, wall board mounting clip2154/4 4 gang, vertical, wall board mounting clip2154H2 2 gang, horizontal, wall board mounting clip2154H3 3 gang, horizontal, wall board mounting clip
CATALOGUE NUMBER & DESCRIPTION
2157/4
2154/4
2000/4
20
00
Se
ries
15
CL
IPS
AL
AC
CE
SS
OR
IES
PLASTER MOUNT (Mounting Brackets cont.)155P 1 gang, plaster mounted bracket2153PRM2 2 gang, vertical, plaster mounted bracket2155PRM3 3 gang, vertical, plaster mounted bracket2155PRM4 4 gang, vertical, plaster mounted bracket2155PHRM2 2 gang, horizontal, plaster mounted bracket2155PHRM3 3 gang, horizontal, plaster mounted bracket
Electrical AccessoriesSOCKET OUTLETS2015V Single gang power outlet, vertical, 250V, 10A2015 Single gang power outlet, horizontal, 250V, 10A2025V Double gang power outlet, vertical, 250V, 10A2025 Double gang power outlet, horizontal, 250V, 10ASWITCHES2031VA 1 gang, vertical, switch, 250V, 10A2032VA 2 gang, vertical, switch, 250V, 10A2033VA 3 gang, vertical, switch, 250V, 10A2034VA 4 gang, vertical, switch, 250V, 10A2035VA 5 gang, vertical, switch, 250V, 10A2036VA 6 gang, vertical, switch, 250V, 10A2031HA 1 gang, horizontal, switch, 250V, 10A2032HA 2 gang, horizontal, switch, 250V, 10A2033HA 3 gang, horizontal, switch, 250V, 10A2034HA 4 gang, horizontal, switch, 250V, 10ADIMMERS2032E450L 1 gang light dimmer, incandescent, 250V, 450W leading edge
PHONE & DATA2031VTO 1 gang telephone outlet plate, Telstra 610 type2031VRJ 1 gang data outlet, RJ45 Series socket mech.2032VRJ 2 gang data outlet, RJ45 series socket mech.
Technical Data
CATALOGUE NUMBER & DESCRIPTION
2033HA
2015V
2032VRJ
2032E450L
OE
M A
CC
ES
SO
RIE
S2
00
0 S
eri
es
16
2000 SERIES
Medical Service Panels located within hospitals often
incorporate systems other than items found within
the Medilec ML2000 and Clipsal 2000 product range.
These additional systems include Nurse Call and Gas
Supply systems.
The advantage of the Clipsal 2000 Series format is that
it is a common platform on which other companies
develop their products. Therefore all of the systems
found on Medical Service Panels are available on the
2000 Series platform.
Detailed below is a list of some of the OEM suppliers of
2000 Series Accessories.
Nurse Call Systems
Austco Communications Systems
Inteltec Communications
MI-CAL Systems
Questek Australia
Gas Systems
Gascon Systems
OEM 2000 Series Accessories
Gascon Gas Outlet
Austco Nurse Call
Questek Nurse Call
MI-CAL Nurse Call
Product of Clipsal Integrated Sys temsA division of Clipsal Australia Pty LtdABN 27 007 873 529
Head Offi ce12 Park Terrace, BowdenSouth Australia 5007
PO Box 103 HindmarshSouth Australia 5007Telephone (08) 8440 0500International +61 8 8440 0500
Facsimile (08) 8346 0845International +61 8 8346 0845
Internet www.clipsal.com/cisE-Mail [email protected]
CIS Technical Support Hotline:1300 722 247
National Customer Service Enquiries:1300 2025 25
National Customer Service Facsimile:1300 2025 56
International Enquiries
International Sales and MarketingTelephone +61 8 8269 0587Facsimile +61 8 8340 7350E-Mail [email protected]
New ZealandClipsal Industries (NZ) LtdTelephone +64 9 576 3403Facsimile +64 9 576 1015E-Mail headoffi [email protected]
Customer ServiceFree Facsimile (0508) 250 305Auckland/Mobile Phone (09) 572 0014Free Phone (0508) CLIPSAL 2547725
MalaysiaClipsal Malaysia Sdn BhdNo 1 Jalan Kawat15/18 Seksyen 1540200 Shah AlamSelangor Darul EhsanWest Malaysia, MalaysiaTelephone: +60 3 551 91111 or 97628Facsimile: +60 3 551 94837’E-Mail: [email protected]
Singapore
Clipsal International Pte LtdNo 5 Fourth Chin Bee RoadSingapore 619699Telephone: +65 6 415 3288Facsimile: +65 6 415 3241E-Mail: clipsal@pacifi c.net.sg
Clipsal Australia Pty Ltd reserves the right to change spec i fi ca tions, modify designs and dis con tin ue items without incurring obligation and whilst every effort is made to ensure that descriptions, specifi cations and other in for ma tion in this catalogue are correct, no warranty is given in respect thereof and the company shall not be liable for any error therein.
You can fi nd this brochure and many others online in PDF format at: clipsal.comFollow the links off the home page or access the following page directly: clipsal.com/wat_lib_pdf.cfm
clipsal.com/cis
© Clipsal Australia Pty Ltd 2006.All rights reserved.
This material is copyright under Australian and international laws. Except as permitted under the relevant law, no part of this work may be reproduced by any process without prior written permission of and acknowledgement to Clipsal Australia Pty Ltd.
International Representatives
ChinaClipsal China LimitedTelephone +86 755 8237 5959
GreeceSchneider Electric AETelephone +30 69 4646 3200
Hong KongClipsal Integrated Systems (HK) LimitedTelephone +852 2487 0261
IndiaSchneider Electric India Pvt Ltd Telephone +91 11 5159 0000
IndonesiaPT Clipsal Graha NusaTelephone +62 21 630 6430
KoreaClipsal Korea Co. LtdTelephone +822 549 5550
PakistanClipsal Pakistan (Pvt) LtdTelephone +92 21 506 7278
PhilippinesClipsal Philippines Inc.Telephone +632 683 0275-78
South AfricaClipsal South Africa (Pty) LtdTelephone +27 11 314 5200
TaiwanClipsal (Taiwan) Co LtdTelephone +886 2 2558 3456
ThailandClipsal Thailand LtdTelephone +66 2 952 5338-42
United Arab EmiratesClipsal Middle EastTelephone +971 6 5570 777
United KingdomClipsal Integrated SystemsC/o Schneider ElectricTelephone +44 870 608 8 608
VietnamClipsal - VTECTelephone +848 856 3002 IS
1-00
5
O/N 17747 April 06/03CLIPCOM 11653 Aug 2006