AGMA2012 FALL TECHNICAL MEETING

OCTOBER 28-30, 2012HYATT REGENCY DEARBORN

DEARBORN, MI

Gear Materials - Selection, Heat Treatment, and Quality ControlFebruary 6-8, 2013 • Clearwater Beach, FL

Gearbox CSI: Forensic Analysis of Gear & Bearing FailuresMarch 12-14, 2013 • Baltimore, MD

Basic Training for Gear ManufacturingApril 8-12, 2013 • Chicago, IL

Gear Manufacturing & Inspection - Methods, Practices, Application & Interpretation for the Design EngineerMay 7-9, 2013 • Rosemont, IL

Gear Failure AnalysisJune 10-12, 2013 • Big Sky, MT

Detailed Gear Design - Beyond Simple Service FactorsJune 18-20, 2013 • Las Vegas, NV

Gear Failure AnalysisAugust 19-21, 2013 • Big Sky, MT

Fall Technical MeetingSeptember 15-17, 2013 • Indianapolis, IN

Gear ExpoSeptember 17-19, 2013 • Indianapolis, IN

Gearbox System Design: The Rest of the Story...Everything but the Gears and BearingsOctober 16-18, 2013 • Clearwater Beach, FL

Basic Training for Gear ManufacturingNovember 4-8, 2013 • Chicago, IL

Registration now open!www.agma.org

Sunday, October 28

10:00 am - 5:00 pm Registration Stutz Room

1:00 pm - 4:30 pm Technical Session I Dearborn Ballroom

6:30 pm - 8:00 pm Welcoming Reception Rotunda Ballroom Relax and take the opportunity to meet old friends, develop new ones and make plans for your stay in Dearborn.

Monday, October 29

7:00 am - 5:00 pm Registration Stutz Room

7:00 am - 8:00 am Continental Breakfast Dearborn Ballroom Foyer

8:00 am - 12:00 pm Technical Session II Dearborn Ballroom

12:00 pm - 1:30 pm Awards Luncheon Springwells Ballroom

1:30 pm - 5:15 pm Technical Session III Dearborn Ballroom

Tuesday, October 30

7:00 am - 1:00 pm Registration Stutz Room

7:00 am - 8:00 am Continental Breakfast Dearborn Ballroom Foyer

8:00 am - 12:00 pm Technical Session IV Dearborn Ballroom

1:00 pm - 4:45 pm Technical Session V Dearborn Ballroom

Advancing gear science is the foundation of AGMA. The technical excellence in the industry is on display each year at AGMA’s Fall Technical Meeting (FTM). This year the FTM highlights the latest research in the industry with presenters from around the world on the topics of:

• Lubrication & Components

• Gear Drive Applications

• Manufacturing & Inspection

• Gear Design Issues

• Materials & Heat Treatment

Thank you for your attendance at this important event!

TECHNOLOGY DRIVENGLOBALLY CONNECTED

2013 Training Calendar

TUESDAY, OCTOBER 30

TECHNICAL SESSION IV - GEAR DESIGN ISSUESModerator - Bob Wasilewski

8:05 am - 8:35 am New Methods for the Calculation of the Load Capacity of Bevel and Hypoid Gears (12FTM15)

Christian Wirth, ZG Zahnräder und Getriebe GmbH

8:35 am - 9:05 am Gear Design Optimization for Low Contact Temperature of a High Speed, Non lubricated Spur Gear Pair (12FTM16)

Carlos H. Wink, Eaton Corporation – Vehicle Group

9:05 am - 9:35 am Dynamic Analysis of a Cycloidal Gearbox Using Finite Element Method (12FTM17)

Sandeep V. Thube, Sumitomo Drive Technologies

9:35 am - 10:00 am Refreshment Break

10:00 am - 10:30 am Analysis of Ripple on Noisy Gears (12FTM18)

Günther Gravel, Hamburg University of Applied Sciences

10:30 am - 11:00 am A Field Case Study of “Whining” Gear Noise in Diesel Engines (12FTM19)

Yefim Kotlyar, Navistar, Inc.

11:00 am - 12:00 pm Question and Answers - Session IV

12:00 pm - 1:00 pm Lunch on your own

TECHNICAL SESSION V - MATERIALS & HEAT TREATMENTModerator - Todd Schatzka

1:00 pm - 1:30 pm The Effect of the Surface Roughness Profile on Micropitting (12FTM20)

Ron Benson, REM Surface Engineering

1:30 pm - 2:00 pm Typical Heat Treatment Defects of Gears and Solutions Using FEA Modeling (12FTM21)

Zhichao (Charlie) Li, Deformation Control Technology, Inc.

2:00 pm - 2:30 pm Crack Testing and Heat Treat Verification of Gears Using Eddy Current Technology (12FTM22)

Dan DeVries, Criterion NDT

2:30 pm - 2:50 pm Refreshment Break

2:50 pm - 3:20 pm Enhancing Control of Distortion Through `One Piece Flow – Heat Treatment’ (12FTM23)

Volker Heuer, ALD

3:20 pm - 3:50 pm Recent Inventions and Innovations in Induction Hardening of Gears and Gear like Components (12FTM24)

Valery Rudnev, Inductoheat, Inc.

3:50 pm - 4:45 pm Question and Answers - Session V

10:00 am - 10:30 am Combined Marine Propulsion Systems: Optimization and Validation by Simulation (12FTM08)

Burkhard Pinnekamp, RENK AG

10:30 am - 11:00 am Systematic Approach for the Psychoacoustic Analysis of Dynamic Gear Noise Excitation (12FTM09)

Christian Carl, RWTH Aachen University

11:00 am - 12:00 pm Question and Answers - Session II

12:00 pm - 1:30 pm Awards Luncheon - Springwells Ballroom

AGMA will present TDEC awards for outstanding service to: John Amendola, Artec Machine Systems Robert Ferguson, Taiga Engineering Group

TECHNICAL SESSION III - MANUFACTURING & INSPECTIONModerator - Terry Klaves

1:30 pm - 2:00 pm Development of Novel CBN Grade for Electroplated Finish Grinding of Hardened Steel Gears (12FTM10)

Sridhar Kompella, Diamond Innovations

2:00 pm - 2:30 pm Contemporary Gear Pre Machining Solutions (12FTM11)

Claus Kobialka, Gleason -Pfauter

2:30 pm - 3:00 pm Manufacturing Method of Pinion Member of Large Sized Skew Bevel Gears Using Multi Axis Control and Multi Tasking Machine Tool (12FTM12)

Isamu Tsuji, Iwasa Tech Co., Ltd.,

3:00 pm - 3:20 pm Refreshment Break

3:20 pm - 3:50 pm Gear Material Selection and Construction for Large Gears (12FTM13)

Frank C. Uherek, Rexnord Industries

3:50 pm - 4:20 pm Large Pinions for Open Gears: The Increase of Single Mesh Load A New Challenge for Manufacturing and Quality Inspection (12FTM14)

Michel Pasquier, CMD

4:20 pm - 5:15 pm Question and Answers - Session III

SUNDAY, OCTOBER 28

TECHNICAL SESSION I - LUBRICATION & COMPONENTSModerator - Thomas J. (Buzz) Maiuri

1:00 pm - 1:05 pm Welcoming Remarks Matt Mondek, AGMA Chairman

1:05 pm - 1:15 pm Opening Remarks Phil Terry, TDEC Chairman

1:15 pm - 1:45 pm Balancing - No Longer Smoke and Mirrors (12FTM01)

Robin Hines Mifsud, Hines Industries, Inc.

1:45 pm - 2:15 pm Power Loss and Axial Load Carrying Capacity of Radial Cylindrical Roller Bearings (12FTM02)

Simon Söndgen, ZOLLERN Getriebetchnik Dorsten GmbH

2:15 pm - 2:45 pm Gear Lubrication - Gear Protection Also at Low Oil Temperature (12FTM03)

Michael Hochmann, Klüber Lubrication München KG

2:45 pm - 3:10 pm Refreshment Break

3:10 pm - 3:40 pm Energy Efficient Industrial Gear Lubricants (12FTM04) David Blain, ExxonMobil Research and Engineering

3:40 pm - 4:30 pm Question and Answers - Session I

6:30 pm - 8:00 pm Reception - Rotunda Lounge Use designated elevator from lobby level

MONDAY, OCTOBER 29

TECHNICAL SESSION II - GEAR DRIVE APPLICATIONSModerator - John Amendola

8:05 am - 8:35 am Combined Effects of Gravity, Bending Moment, Bearing Clearance, and Input Torque on Wind Turbine Planetary Gear Load Sharing (12FTM05)

Yi Guo, National Renewable Energy Laboratory

8:35 am -9:05 am Virtual Optimization of Epicyclic Gearbox Planet Bearings in Wind Turbines (12FTM06)

Dayananda Raju, SKF

9:05 am - 9:35 am Validation of a Model of the NREL Gearbox Reliability Collaborative Wind Turbine Gearbox (12FTM07)

Christopher Halse, Romax Technology, Inc.

9:35 am - 10:00 am Refreshment Break www.agma.org

September 17–19, 2013 IndIana ConventIon Center

IndIanapolIS, In

www.Gearexpo.Com

2013 CALL FOR PAPERS NOW AVAILABLE

AGMA Fall Technical MeetingSeptember 15-17, 2013

Indianapolis, IN

Deadline for abstract submission

is December 20, 2012.