Technology Table Power Options - Coriander Designs · D Siemon 4 Port 010-0406 E Amp 2 Port 010-0405 F Leviton Black 2 Port 010-0407 G Krone 3 Port 01 0- 4 8 H Siemon CT Plate 010-0409

20485 144th Ave NE Woodinville WA 98072 T 425.402.8001 F 425.402.8985 corianderdesigns.com 126made inthe USA

Technology Table Power Options

P-1 Power ModulePower supply and interconnecting device to mainframe or network computer systems.Provides four auxiliary grounded, 15 amp receptacles and a blank telecom plate. Designed to work inside T1 style Technology Trough. Available in Matte Black.

UL Listed

P-2 Power ModuleA low profile, table top system. Opening the hinged lid reveals angled power and data plates; configured standard with four 15 amp power receptacles and cutouts for up to four configurable telecom plates. Availble in a black textured finish and black smoked, frosted glass and aluminum access door.

CSA Listed

P-3 Power ModuleLow profile steel system with a top that pivots up for use. Standard includes two 110 volt electrical outlets, one RJ-11 and one RJ-45 data modules and 10 foot power cord.

UL and CSA Listed

P-14 Power ModuleThe next generation of flexible tabletop power and data solutions for executive and institutional work station applications. Retractable and durably constructed, a highly functional with a fluid, one touch door that remains open during use. Standard with two power outlets, two powered usb and one blank slot.

UL Listed

P-5 Power ModuleA 30” decorative table top power module incorporates modern design elements to provide an elegant solution. The P-5 incorporate an integral two door aluminum lid with dampened release action which retracts into the table when opened to maximize table work surface and compliment any table design. Standard with 12 power receptacles and 4 telecom plates. Fully flexible, P-5 Power Module can be customized with up to 16 power receptacles or 12 fully configurable telecom plates depending on your individual requirements. Available in a Black Anodized Aluminum or a Silver Aluminum.UL Listed

P-1 Power ModuleProvides a Power supply and interconnecting device to mainframe or network computer systems using four auxiliary grounded, 15 amp receptacles and a blank telecom plate. Designed to work inside T1 style Technology Trough. Available in Matte Black.

UL Listed

USB/Firewire Connectors

102 USB Type “A” w/wires

C7 Firewire panel Mount Type 1 Inline C9 USB A/B Inline in XLR body

C27 USB Inline L-Com Body

C25 USB Inline XLR Body Silver

Video ConnectorsInline

10

S-Video (SVHS)

71 S-Video (SVHS) Siemon Black

XLR Connectors Solder

13

3 Pin XLR Female

41 3 Pin XLR Male

C28 3 Pin XLR Female Silver

25 4 Pin XLR Female

42 4 Pin XLR Male

C33 4 Pin XLR Blk w/Gold Pins

C14 5 Pin XLR Female

23 6 Pin XLR Female

W 6 Pin XLR Small Body

66 3 Pin Mini XLR Female

33 4 Pin Mini XLR

C11 4 Pin Mini XLR Male

67 5 Pin XLR Female

Miscellaneous Connectors 69 BNC Siemon Black

C 8 Pin Neutrik Female

D Door Siemon Black

Inline C17 HDMI FF Connector*

Telecom Plate Type

*Indicates connector cannot be used in ECA Concept or Corner Power Column

A “A” Plate

B “B” Plate

Q “Q” Plate

C Lucent (Avaya) 3 Port 010-0404

D Siemon 4 Port 010-0406

E Amp 2 Port 010-0405

F Leviton Black 2 Port 010-0407

G Krone 3 Port 010-0408

H Siemon CT Plate 010-0409

I Panduit 4 Port 010-0410

K Leviton White 2 Port 010-0413

L Leviton Black 4 Port 010-0414

M Ortronics Black 3 Port 8965-0519

N Nordox 3 Port 010-0416

R Ortronics Dual 2 Port 010-0419

S Krone White 3 Port 010-0422

Jacks and Descriptions

Mini-Stereo Connectors Inline

L

Mini Stereo Inline F/F

C37 Mini Stereo F/F commonscope

Solder 4 Mini Stereo

86 ¼ Stereo Female

Jack ECA# Description

Telecom Plate Cutout Dimensions

Telecom Plate Dimensions

P-1 conference table power info







10

S-Video (SVHS)



13

3 Pin XLR Female

41 3 Pin XLR Male


25 4 Pin XLR Female

42 4 Pin XLR Male



23 6 Pin XLR Female



33 4 Pin Mini XLR


67 5 Pin XLR Female



D Door Siemon Black


Telecom Plate Type


A “A” Plate

B “B” Plate

Q “Q” Plate



E Amp 2 Port 010-0405













L




86 ¼ Stereo Female



Telecom Plate Dimensions P-1 Data Knock out Dimensions P-1 Data Plate Dimensions

20485 144Th Ave Ne Woodinville Wa 98072 | T425.402.8001 | F425.402.8985 | corianderdesigns.com

P-2 Power ModuleA low profile, table top system. Opening the hinged lid reveals angled power and data plates; configured standard with four 15 amp power receptacles and cutouts for up to four configurable telecom plates. Availble in a black textured finish and black smoked glass, frosted glass and aluminum access door.

CSA Listed









10

S-Video (SVHS)



13

3 Pin XLR Female

41 3 Pin XLR Male


25 4 Pin XLR Female

42 4 Pin XLR Male



23 6 Pin XLR Female



33 4 Pin Mini XLR


67 5 Pin XLR Female



D Door Siemon Black


Telecom Plate Type


A “A” Plate

B “B” Plate

Q “Q” Plate



E Amp 2 Port 010-0405













L




86 ¼ Stereo Female










10

S-Video (SVHS)



13

3 Pin XLR Female

41 3 Pin XLR Male


25 4 Pin XLR Female

42 4 Pin XLR Male



23 6 Pin XLR Female



33 4 Pin Mini XLR


67 5 Pin XLR Female



D Door Siemon Black


Telecom Plate Type


A “A” Plate

B “B” Plate

Q “Q” Plate



E Amp 2 Port 010-0405













L




86 ¼ Stereo Female




ECA • 10 Mountain View Drive • Shelton, CT 06484 • Phone: 1-800-521-3175 • Fax: 203-924-6687

www.electri-cable.com 9065-0048 Rev G

Innovati ve Power + Data Solutions

INTERFACE I UT Specification Sheet

15.19

6.68

2.85 5.80

13.39

Product Specifications Shown with optional Tel-com plates and connectors Standard finish is black powder coat with light textured or

brushed stainless steel Available as corded or hard wired Installer can fabricate lid as needed or use Lid Pivot

Assembly available from ECA Recommended table cutout 13-3/4” x 6-3/8” Corded units and Hard Wired units are CSA Certified


www.electri-cable.com

Interface I UT Trim Pivot Kit Specification Sheet

Glass, Wood or Aluminum Top

6.38

Aluminum Bands Each Side

13.75

• Fits standard Interface I UT cutout (13-3/4” x 6-3/8”) • Top material can be glass, brushed aluminum or any manufactured

material cut to ¼” thickness (Note: Wood tops may have to be rabbeted to ¼” on ends)

• Top size is 12-13/16” x 5-3/4”. • ECA does not offer wood tops. • Aluminum side pivot assemblies are satin brushed aluminum.

Product Specifications

Innovat ive Power + Data Solut ions

9065-0079 REVC 1 OF 2

Page 1 of 29065-0025 Rev F

Interface I UT

Installation Instructions

Recommended Table Cutout

13 1/2” 5 7/8”

2-13/16”


www.electri-cable.com

Installation Instructions 1. Use Table Cutout above for cutout size and screw positions. 2. Mount Interface utilizing keyholes and slide into position. 3. Fabricate top as required.



P-14 Power ModuleThe next generation of flexible tabletop power and data solutions for executive and institutional work station applications. Retractable and durably constructed, a highly functional with a fluid, one touch door that remains open during use. Standard with two power outlets, two powered usb and one blank slot.

UL Listed

Avialable with HDMI, RJ45, RJ11, USB Pass Through, Extron Adapter



No

Oasis Series

Oasis Series

Oasis Series Configurations Product Specifications

Recommended Table Cutout: 29.12” x 8.25”

Table Thickness: 1.25” to 2.00”

Standard finish options include silver or black powder coat, or silver or black powder coat with brushed and clear or black anodized doors.

Supplied with 108” power cords. DaisyLink™ versions available for linking multiple units together.

Oasis Power Inserts are UL Listed.

Oasis™ Series Specification Sheet and Ordering Information

The Oasis table troughs are packed with style, power and data capabilities. Their modern design provides an elegant solution for designers or manufacturers looking for a fresh alternative to traditional designs. Oasis troughs lie flush within the table surface and incorporate an integral two door aluminum lids which retracts into the table when opened to maximize table work surfaces and compliment any table design. Fully flexible, Oasis troughs can be customized with up to 16 power receptacles or 12 fully configurable telecom plates depending on your individual requirements.

Oasis Series Standard Ordering Information Ordering Number Product Configuration — Oasis, Aluminum

OASIS A Oasis with 8 Power and 6 telecom plate cutouts, 2 108” cords with molded plug, Silver Pearl with brushed and clear anodized aluminum lids

OASIS A BL Oasis with 8 Power and 6 telecom plate cutouts, 2 108” cords with molded plug, Ebony with brushed and black anodized aluminum lids

OASIS B Oasis with 12 Power and 4 telecom plate cutouts, 4 108” cords with molded plug, Silver Pearl with brushed and clear anodized aluminum lids

OASIS B BL Oasis with 12 Power and 4 telecom plate cutouts, 4 108” cords with molded plug, Ebony with brushed and black anodized aluminum lids

Ordering Number Product Configuration — Oasis, Hardwire *Hardwire inserts use black receptacles.

OAS-A-4-1-S Oasis with 8 power and 6 telecom plate cutouts, Silver Pearl with brushed and clear anodized aluminum lids

OAS-A-4-1-B Oasis with 8 power and 6 telecom plate cutouts, Ebony with brushed and black anodized aluminum lids

OAS-A-PC-4-1-S Oasis with 8 Power and 6 telecom plate cutouts, Silver finish

OAS-A-PC-4-1-B Oasis with 8 Power and 6 telecom plate cutouts, Black finish

Ordering Number Product Configuration — Oasis, Powder Coated Steel

OAS-A-PC-B Oasis with 8 Power and 6 telecom plate cutouts, 2 108” cords with molded plug, Black finish

OAS-A-PC-S Oasis with 8 Power and 6 telecom plate cutouts, 2 108” cords with molded plug, Silver finish

OAS-B-PC-B Oasis with 12 Power and 4 telecom plate cutouts, 4 108” cords with molded plug, Black finish

OAS-B-PC-S Oasis with 12 Power and 4 telecom plate cutouts, 4 108” cords with molded plug, Silver finish

42SB2-72 72” Hardwire Starter Cables

OAS-B-PC-4-1-B Oasis with 12 Power and 4 telecom plate cutouts, Black finish

OAS-B-PC-4-1-S Oasis with 12 Power and 4 telecom plate cutouts, Silver finish

OAS-B-4-1-B Oasis with 12 power and 4 telecom plate cutouts, Ebony with brushed and black anodized aluminum lids

OAS-B-4-1-S Oasis with 12 power and 4 telecom plate cutouts, Silver Pearl with brushed and clear anodized aluminum lids

Innovative Power + Data Solutions 10 Mountain View Drive • Shelton, CT 06484 • P:800.521.3175 • F:203.924.6687 • www.electri-cable.com © ECA-August2011—Product specifications subject to change without notice

Oasis Inserts Shown 11.25” x 2.67”

Oasis Closed Lid Shown 30” x 9”

QR Code Scan here to learn more







10

S-Video (SVHS)



13

3 Pin XLR Female

41 3 Pin XLR Male


25 4 Pin XLR Female

42 4 Pin XLR Male



23 6 Pin XLR Female



33 4 Pin Mini XLR


67 5 Pin XLR Female



D Door Siemon Black


Telecom Plate Type


A “A” Plate

B “B” Plate

Q “Q” Plate



E Amp 2 Port 010-0405













L




86 ¼ Stereo Female





P-5 Power ModuleThe P-5 incorporates an integral two door aluminum lid with dampened release action which retracts into the table when opened to maximize table work surface.Standard with 12 power receptacles and 4 telecom plates. Fully flexible, P-5 Power Module can be customized with up to 16 power receptacles or 12 fully configurable telecom plates. Available in a Black Anodized Aluminum or a Silver Aluminum.UL Listed

P-5 Closed Lid Shown 30”x9”

P-5 Inserts Shown 11.25”x2.67”

4 insert per power module

3) Power & 1)Data Knock out

4) Power

3) Data Knock outs







10

S-Video (SVHS)



13

3 Pin XLR Female

41 3 Pin XLR Male


25 4 Pin XLR Female

42 4 Pin XLR Male



23 6 Pin XLR Female



33 4 Pin Mini XLR


67 5 Pin XLR Female



D Door Siemon Black


Telecom Plate Type


A “A” Plate

B “B” Plate

Q “Q” Plate



E Amp 2 Port 010-0405













L




86 ¼ Stereo Female





Installation Sheet

CutoutWidth *

CutoutLength

Clamp & Thumb Screws 2 Sets

CUTOUT SIZES

P-5 P-5 Mini

Cutout 8.25 8.25 Width*

Cutout 29.12 14.12 Length

* See Cutout Detail for undercuts required for door clearance.

Removable Inserts

P-5 Pan

FIGURE 1

FIGURE 2

Thumb Nut & Washer 2 Per Insert


1. Cutout table as required (see Figure 1, Cutout Sizes & Cutout Detail)

2. Insert P-5 into cutout from above and clamp into position using Clamps & thumb

Screws provided. Note: Keyslots in clamps engage over T-Studs in P-5 and thumb

screws tighten against underside of table surface. (double sided tape may be required

to prevent side of Bezel from bowing when in table).

3. Check for smooth operation of doors and adjust in cutout if required.

4. P-5 Inserts have been installed at the factory but may be repositioned in the field if

desired. To reposition P-5 Inserts remove thumb nuts & washers from rear and

reposition as needed (see Figure 2).

5. Connect all power & data cabling as needed and check for proper operation.

CUTOUT DETAIL

9.00 Clearance

.50 BothSides

Cutout Width *

Door Swing

Table Thickness 1.25 – 2.00

5.28 Outer Pan Depth

Keyslots Engaged Over T-Studs Thumb

Screws

Corded = 4.90

Specification Sheet

3.70”

1.30”

3.70”

2.91”


P-6 Power ModuleP-6 Power Modules are offered in configurations including power

only or power and data, flip up units which can be closed to become

discretely part of the worksurface. Standard finishes include black

textured or brushed stainless steel. UL Listed


Specification Sheet

3.70”

1.30”

3.70”

2.91”

Installation Sheet

Cutout 3.70 3.40”

3.40”Figure 1

Figure 2

TableThickness Between 3/4” – 1-7/8”

Figure 3

Relieve Edge 3.70” x 3.70” by 1/16” Deep

1/16” Radius MaxTyp. 4

2.86 Tables ¾” - 1-1/4” 3.39 Tables 1-1/4” – 1-7/8”

Ensure bezel is flush withtop

1/4” Radius MaxTyp. 4

Front of unit

Use This Hole for 1-1/4” – 1-7/8” Tables

Use This Hole for 3/4” – 1-1/4” Tables

Table Cutout (Fits surface thickness up to 1.88”)

3.70

Clamping Screws

1. Follow the illustration in Figure 1 for cutout size in table as well as the area that gets relieved down to a depth of 1/16”.

2. Insert P-6 into cutout and using threaded studs, washers and plastic nuts secure clamp to P-6 using appropriate hole in clamps, see Figures 2 & 3.

3. After clamp is in place insert and tighten down on clamping screws to firmly secure P-6 in table cutout.

4. The P-6 comes pre-wired for both the power and the data; therefore no internal connections are required. Simply connect cords as needed.

5. Check for proper operation and movement of the P-6


P-12 desk top power info

P-12 Power ModuleP-12 is a horizontal-mount desktop accessory, bringing power

and data right to your fingertips.Delivering a fresh look in new

colors, but with all the same great capabilities. For clean design

and simple installation - you’re in the right spot. Black or white

finishes available.UL Listed


Install data jacks as described in the installation instructions provided with the data adapters, BE01421

I N S T A L L A T I O N I N S T R U C T I O N S F O R P - 1 2

MD4 S-Video Couple None M81-SVHS-SVHS-xxx None SFSVxx None None None OR-60900074 CMSVCxxx None None None

MD4 S-Video Solder None None None None None None None None None None None NoneF-Coax Twist On AT32F-xx None M81C SFFxx

SFFGxxSIFxx

6645-1-157-xx MJSCPF-xx 41084-Fxx40831-Bxx

OR-63700006-xxOR-KSFCN

CMFSRxxNKFxxCMFxx

CT-FA-xx None 1499855-x

BNC AT32BB-xx None M81 BNC-B SFBxx 6645-1-159-xx MJSCPBNC-xx 40832-Bxx OR-63700023OR-KSBNC

NKSPMxx None None None

RCA Coupler None None None SFRCxxRxx None MJSCPRCA-xx 40830-Bxx None NKRTMxxxCMRPxxx

CT-RA-xx 1375362-x 1375361,2,3-x1933192,3,4-x

RCA 110 Terminal AT32RCA-110-xx M81-RCA-PT-YL None SFRC110xx 6645-1-133-xx None 40735-Rxx OR-63700047 CJRxxxNKRPMxxx

None None 147923x-x

RCA Solder AT32RCA None None SFRCxx None None None None NKRSMxxx MX-F-RC-xx 1375365-x 1375364,5,6-xRCA Compression None None None None None None 40782-Rxx None None None None None3mm Sjack None M81-S35MM-S35MM None None None None 40837-Bxx None NK35MSCxx

CM35MSCBNone None 1933582-x

3.5mm Sjack Solder None None None SF35FFxx None None None None NK35MSSxxCM35MSSxx

None None 1479086-x

3.5mm Sjack- BE02494-C-120Pre-assembled w/ 20" MF CableUSB Coupler A-A None None None SFUSBAAxx None None None None None None None 1933655-xUSB Coupler A-B None None None SFUSBABxx None ECF504B-UAB None None None None None 1933661-xUSB Solder None None None None None ECJ504B-UA None None None None None NoneUSB-A BE02155-CPre-assembled w. 4ft CableUSB-B BE02156-CPre-assembled w. 4ft CableUSB Integral Cord None None None None None ECF504-5M None None None None None None3 Pin XLR Solder None None None XLR10 None None None None None None None None3 Pin XLR Screw None None None XLRST10 None None None None None None None NoneSVGA HD15 Coupler ATGM15FF None None None None None None OR-60900270 None None None NoneSVGA HD15 Screw BE02493-72(5) None None None IM15ST10x None DGBH15FT None None CMD15HDxxx None None None

BE02493-120(6)

SVGA HD15 to 110 None None None None None None None None None None None 1479288-x6 Pin DIN (KeyBd/Mouse) None None None SF6PK None None None OR-63700025 None None None NoneHDMI Coupler BE1018192HDMI MF 90 Degree BEFR-HH-FM270

(1) w/ 8-Pin, Amp RJ45 Cat 5e, Pre-terminated w/ 9' cable(2) w/8-Pin, Panduit RJ45 Cat 5e, Pre-terminated w/ 9' cable(3) w/ 8-Pin, Siemon RJ45 Cat 6, Pre-terminated w/ 6'ft cable(4) w/ 8-Pin, Siemon RJ45 Cat 6, Pre-terminated w/ 10'ft cable(5) Preassembled w/15 Pin SVGA Male Connector and 72” cable(6) Preassembled w/15 Pin SVGA Male Connector and 120” cable

Note: Information may be considered reliable as of 6/26/13. Manufacturers may add, delete, or change products without notice. Proper �t of any Telecommunications connector should always be tested before use.

320 Byrne Industrial Dr. Rockford, Michigan 49341 Phone (616) 866-3461 Fax (616) 866-3129 www.byrne-electrical.com© 2013 Byrne Electrical Specialists, Inc. All Rights Reserved

Sheet 2 of 2

Type Byrne Electrical Allen Tel Commscope/ UnipriseCommscope/ Systemax Hubbell Krone/ADC L-Com Leviton Ortronics Panduit Siemon Tyco Electronics

Tyco Electronics / AMP

P-13 Power Moduleis a flexible two part system consisting of a Power Base which is mounted beneath

the worksurface and a selection of grommets allowing customization of the table

top. Our unique convenience receptacle, located on the power base, provides

easy access for meeting various ancillary power requirements.

Grommet avaible in Black, Silver and brushed Steel.




www.electri-cable.com 9065-0157 REVD


Villa Installation Sheet


1. Provide 5.25 x 3.00” cutout at location Villa will be mounted. 2. Attach Villa Power Base to surface from underside using 6 screws provided

as shown. Center receptacles in opening as shown. Note: Do not use provided screws on table thicknesses less than 1.00”.

3. Connect power cord, as needed 4. Connect data jacks, if provided, as needed.

Recommended Cutout 5.25” x 3.00”

Optional Data Cutouts

Mounting Screws

10 Mountain View Drive l Shelton, CT 06484 l P: 800.521.3175 l F: 203.924.6687 l www.electri-cable.com

©2014 Electri-Cable Assemblies. ECA reserves the right to change pricing and specification without notice.

VILLATM SINGLE CIRCUIT CORDED SERIESThe Villa Single Circuit Series is a flexible two part system consisting of a Power Base which ismounted beneath the worksurface and a selection of grommets allowing customization of the tabletop. Our unique convenience receptacle, located on the power base, provides easy access for meetingvarious ancillary power requirements. Optional 2.1 Amp USB charging ports now charge your favorite devices while in use. Numerous power base and grommet options are available making the Villa Series the most flexible power unit available.

Product Dimensions

VILLA POWER BASE WITH DATA SHOWN3.20” x 8.63” x 2.25”

Ordering informationPart number DescriptionVilla Power B ases

VIL-C-DKO-B-Length* 2 Power Receptacles and 2 knockouts for RJ45 connectors, black finishVIL-C-DKO-S-Length* 2 Power Receptacles and 2 knockouts for RJ45 connectors, silver finishVIL-C-D-B-Length* 2 Power Receptacles and 2 RJ45 Cat 6 connectors, power cord with molded

3 pronged plug, and black finishVIL-C-D-S-Length* 2 Power Receptacles and 2 RJ45 Cat 6 connectors, power cord with molded

3 pronged plug, and silver finish

VIL-C-U-D-B-Length* 2 Power Receptacles, 2 2.1Amp charging ports, and 2 RJ45 Cat 6 connectors, power cord with molded 3 pronged plug, black finish

VIL-C-U-D-S- Length* 2 Power Receptacles, 2 2.1Amp charging ports, and 2 RJ45 Cat 6 connectors, power cord with molded 3 pronged plug, silver finish

VIL-C-U-DKOB- Length* 2 Power Receptacles, 2 2.1Amp charging ports, and 2 knockouts for RJ45 connectors, power cord with molded 3 pronged plug, black finish

VIL-C-U-DKOS- Length* 2 Power Receptacles, 2 2.1Amp charging ports, and 2 knockouts for RJ45 connectors, power cord with molded 3 pronged plug, silver finish

* Cord lengths available are 36", 72", and 108". Pricing is standard for all 3 cord lengths.

Villa Grommets

FLUSH STYLE LIFT STYLEVIL-GROM-F-AL Brushed Aluminum VIL-GROM-L-B BlackVIL-GROM-F-SS Stainless Steel VIL-GROM-L-S SilverVIL-GROM-F-S Silver VIL-GROM-L-W Gloss WhiteVIL-GROM-F-B BlackVIL-GROM-F-W Gloss White

Each Villa comes with 4 cable clamps with screws and 6 power base mounting screws.

Specifications

VILLA LIFTGROMMETSHOWN3.39” X 5.68”

SPECIFICATION SHEET AND ORDERING INFORMATION

VILLA POWER BASE WITH USB AND DATA SHOWN3.10” X 8.63” X 3.03”

8.63"

3.03"

3.1"

8.63”

2.90”

2.20”

5.68”3.39”

NOW with

USB!

• Recommended Table Cutout for Villa Grommet: 3.00”x 5.25”• Minimum Table Thickness for Villa Grommet: 1.00“• Grommet finishes include: Black, Silver, Gloss White, Stainless Steel, and Clear Brushed Aluminum• Standard cord lengths available: 36”, 72”, and 108”• Power bases are UL or ETL certified

3.11”

8.62”

2.25”

3.11”

8.63"

"3.03"

3.11”

Each Villa Grommet comes with 2 mounting screws.

10 Mountain View Drive l Shelton, CT 06484 l P: 800.521.3175 l F: 203.924.6687 l www.electri-cable.com

©2014 Electri-Cable Assemblies. ECA reserves the right to change pricing and specification without notice.

VILLATM SINGLE CIRCUIT CORDED SERIESThe Villa Single Circuit Series is a flexible two part system consisting of a Power Base which ismounted beneath the worksurface and a selection of grommets allowing customization of the tabletop. Our unique convenience receptacle, located on the power base, provides easy access for meetingvarious ancillary power requirements. Optional 2.1 Amp USB charging ports now charge your favorite devices while in use. Numerous power base and grommet options are available making the Villa Series the most flexible power unit available.

Product Dimensions

VILLA POWER BASE WITH DATA SHOWN3.20” x 8.63” x 2.25”

Ordering informationPart number DescriptionVilla Power B ases

VIL-C-DKO-B-Length* 2 Power Receptacles and 2 knockouts for RJ45 connectors, black finishVIL-C-DKO-S-Length* 2 Power Receptacles and 2 knockouts for RJ45 connectors, silver finishVIL-C-D-B-Length* 2 Power Receptacles and 2 RJ45 Cat 6 connectors, power cord with molded

3 pronged plug, and black finishVIL-C-D-S-Length* 2 Power Receptacles and 2 RJ45 Cat 6 connectors, power cord with molded

3 pronged plug, and silver finish

VIL-C-U-D-B-Length* 2 Power Receptacles, 2 2.1Amp charging ports, and 2 RJ45 Cat 6 connectors, power cord with molded 3 pronged plug, black finish

VIL-C-U-D-S- Length* 2 Power Receptacles, 2 2.1Amp charging ports, and 2 RJ45 Cat 6 connectors, power cord with molded 3 pronged plug, silver finish

VIL-C-U-DKOB- Length* 2 Power Receptacles, 2 2.1Amp charging ports, and 2 knockouts for RJ45 connectors, power cord with molded 3 pronged plug, black finish

VIL-C-U-DKOS- Length* 2 Power Receptacles, 2 2.1Amp charging ports, and 2 knockouts for RJ45 connectors, power cord with molded 3 pronged plug, silver finish

* Cord lengths available are 36", 72", and 108". Pricing is standard for all 3 cord lengths.

Villa Grommets

FLUSH STYLE LIFT STYLEVIL-GROM-F-AL Brushed Aluminum VIL-GROM-L-B BlackVIL-GROM-F-SS Stainless Steel VIL-GROM-L-S SilverVIL-GROM-F-S Silver VIL-GROM-L-W Gloss WhiteVIL-GROM-F-B BlackVIL-GROM-F-W Gloss White

Each Villa comes with 4 cable clamps with screws and 6 power base mounting screws.

Specifications

VILLA LIFTGROMMETSHOWN3.39” X 5.68”

SPECIFICATION SHEET AND ORDERING INFORMATION

VILLA POWER BASE WITH USB AND DATA SHOWN3.10” X 8.63” X 3.03”

8.63"

3.03"

3.1"

8.63”

2.90”

2.20”

5.68”3.39”

NOW with

USB!

• Recommended Table Cutout for Villa Grommet: 3.00”x 5.25”• Minimum Table Thickness for Villa Grommet: 1.00“• Grommet finishes include: Black, Silver, Gloss White, Stainless Steel, and Clear Brushed Aluminum• Standard cord lengths available: 36”, 72”, and 108”• Power bases are UL or ETL certified

3.11”

8.62”

2.25”

3.11”

8.63"

"3.03"

3.11”

Each Villa Grommet comes with 2 mounting screws.

DB-9

High-density DB-15

DB-15

DB-25

DB-25

DB-37

DB-50

6-pin Mini-DIN Used on mouse, keyboard and other devices (PS/2 connector)

5-pin DIN used on earlier PC keyboards and various audio

Lock

Pin

Slot

Oasis Series

BNC Connector DIN Connector (PC, PS/2 keyboard , Mouse)

DIN Connectors are commonly used for keyboards and mouse ports on desktop and laptop computers. They are also used for various audio connections such as microphones.

DB Connectors RJ-45 Connectors

RJ-45 connectors are a large version of the common RJ-11 telephone plug and socket. Commonly used for computer networks. These connectors are available as both standard punchdown or inline. Punchdown connectors require “punching” of the wires to a patchcord.

Inline allows you to insert a standard patch cord with no wire preparation required.

RJ-11 Phone Connectors

RJ-11 connectors are the common plug and socket used for telephones. RJ-11s contain 4 wires, but there is a six wire variation.

BNC plugs and sockets are used to connect signal cables to monitors and other video equipment.

Serial port (RS-232)

VGA port

Game port on PC, Thick Ethernet

Parallel port on PC, Serial port (RS-232)

RS-432, 442, 449

Dataproducts, Datapoint, etc.

Jack Descriptions

DB Connectors are available in solder and inline configurations. Inline allows connection to the back of the connector without any wiring.

RJ-45 568-A RJ-45 568-B RJ-45 USOC

1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8

DB-9

High-density DB-15

DB-15

DB-25

DB-25

DB-37

DB-50



Lock

Pin

Slot

Oasis Series










VGA port



RS-432, 442, 449


Jack Descriptions


RJ-45 568-A RJ-45 568-B RJ-45 USOC

1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8

DB-9

High-density DB-15

DB-15

DB-25

DB-25

DB-37

DB-50



Lock

Pin

Slot

Oasis Series










VGA port



RS-432, 442, 449


Jack Descriptions


RJ-45 568-A RJ-45 568-B RJ-45 USOC

1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8

Mini-A

Mini-B

Straight Side

Rounded Side

Mini-A

Mini-B

USB Mini connectors are used on PDAs, cameras, music players, and USB hubs. The plugs and sockets are very small and look alike, but Mini-A has straighter sides, while Mini-B is more rounded.

Stereo Mono Left Audio Right Audio Composite video (yellow)

Type A (host or hub)

Type B (peripheral)

ST SMA Type 906 FC SC

MIC Fiber Jack

MT-RJ

Oasis Series ECA Telecom Options

F Connector (Video, Antennas) Twin Axial Connector

F connectors are used to attach antennas to TVs and other video equipment.

Mini-phone plugs and sockets are used to attach headphones to tape, CD and CD-ROM. They are also used for computer audio. Also known as 3.5 mm or ⅛” audio jacks. Inline and solder connectors are available.

RCA plugs and sockets are the common connectors for audio and video on Stereos, TVs, VCRs, and other AV. Connectors are available as inline or solder types.

All fiber optic connectors use ferrules to hold the ends of the fiber to keep them properly aligned.

The ST connector uses a half-twist bayonet type of lock.

The SC uses a push-pull connector similar to common audio and video plugs and sockets.

The MIC is the standard FDDI Connector.

The Fiber Jack connector attaches two fibers in a snap lock connector similar in size and ease of use as a RJ-45 connector.

MR-RJ is a popular connector for two fibers in a very small form factor.

SMA and FC use threaded connections.

Jack Descriptions

Mini-Phone Connector (Audio, Sound Cards)

Phono (RCA) Connector (Audio & Video)

Fiber Optic Connectors USB Connectors (Type A & Type B)

USB Connectors are inline types. Our standard USB connector is universal and will allow connection of both Type A and Type B connections.

Twin axial connectors are used on IBM system 3x and AS/400 computer systems.


BNC Connectors Solder

7

BNC

C8 BNC/RNA BTX ⅜”

8 TNC

BTX Connectors Screw Terminal

57

15 Pin HD BTX

93 9 Pin Sub D Female BTX

101 15 Pin HD BTX small

Coax Connectors Inline

20

Coax Type “F”

68 Coax Type “F” Siemon Black

24 6 Pin Mini Din Female

CrestronConnectors

15 88

Crestron TPSBLOCK-10 Creston w/patchcord

DB Connectors t

C15 15 Pin HD Female/5 BNC Solder 12 9 Pin Sub D Female

16 9 Pin Sub D Male

3 15 Pin HD Female

9 15 Pin Sub D Male

17 15 Pin HD Male

14 15 Pin Sub D Male

C13 15 Pin Female solder back

6 25 Pin Sub D Female



Inline 37 15 Pin HD Gender Chgr F/F

45 9 Pin Sub D Inline M/M

99 9 Pin Sub D Inline F/F

80 9 Pin Sub D Inline M/F

43 15 Pin HD Inline M/F

76 15 Pin HD M/M Gender Chgr

Fiber Optic Connectors 47 T

Fiber Panduit Off White Fiber Siemon ST Black

U Fiber Siemon LC Blue

54 Fiber Siemon SC Dual

RCA Connectors Solder

5

RCA

70 RCA Siemon Black Inline G RCA F/F Green

H RCA F/F Blue

77 RCA F/F Red

78 RCA F/F White

79 RCA F/F Yellow

RJ-11 Telephone ConnectorsPunch Down

91

RJ-11 Allen Tel White

31 RJ-11 Amp Cat 6 Black

98 RJ-11 Avaya White

49 RJ-11 Avaya Black

62 RJ-11 Hubbell Office White

50 RJ-11 Hubbell Black

C23 RJ-11 Leviton Cat 3 Ivory

C26 RJ-11 Leviton Cat 3 Black

C4 RJ-11 Nordx Cat 3

82 RJ-11 Ortronics Black

84 RJ-11 Ortronics Yellow

85 RJ-11 Ortronics Green

C20 RJ-11 Panduit Cat 3 Black

A RJ-11 Siemon Cat 3 Black

100 RJ-11 SMP Gray

1 RJ-11 SMP Cat 3 Black

Inline 11 RJ-11 Amp Cat 3 Inline


DVI Connectors

Inline

Z

DVI Inline F/F


RJ-45 Data ConnectorsPunch Down

90

RJ-45 Allen Tel Cat Ivory

O RJ-45 Amp Cat 6 Black

30 RJ-45 Amp Cat 6 Orange

72 RJ-45 Amp Cat 5 Gray

61 RJ-45 Avaya Cat 5 Red

N RJ-45 Avaya Cat 5 Ivory “A”

P RJ-45 Avaya Cat 5 Blue “A”

18 RJ-45 Avaya Cat 5 White

65 RJ-45 Avaya Cat 5 Blue

35 RJ 45 Avaya Cat 6 Black

97 RJ-45 Avaya Cat 6 Red

46 RJ-45 Hubbell Cat 5E Black

52 RJ-45 Leviton Cat 6 White

V RJ-45 Leviton Cat 6 Red

32 RJ-45 Leviton Cat 5 Orange

75 RJ-45 Leviton Cat 6

C24 RJ-45 Leviton Cat 6 Blue

C3 RJ-45 Nordx cat 6

83 RJ-45 Ortronics Cat 6 Orange

R RJ-45 Otronics Dual Cat 6 Blk

64 RJ-45 Ortronics Cat 6 Black

C29 RJ-45 Ortronics 10G Black

C30 RJ-45 Ortronics Cat 6 Blue

C31 RJ-45 Ortronics Cat 6 White

44 RJ-45 Panduit Cat 5E Off White

48 RJ-45 Panduit Cat 6 Yellow

55 RJ-45 Panduit Cat 5E Red

89 RJ-45 Panduit Cat 6 Ivory Key

40 RJ-45 Panduit Cat 5E Ivory

Q RJ-45 Panduit Cat 6 Black

74 RJ-45 Panduit Cat 6 Black Key

94 RJ-45 Panduit Cat 6 Blue

95 RJ-45 Panduit Cat 6 Elec Ivory

RJ-45 Data ConnectorsPunch Down

Y

RJ-45 RIT Cat 6 Blk

39 RJ-45 Siemon Cat 6 Coupler

58 RJ-45 Siemon Cat 6 Ang White

59 RJ-45 Siemon Cat 6 White

60 RJ-45 Siemon Cat 6 Gray

B RJ-45 Siemon Cat 6 Black

E RJ-45 Siemon Cat 5E Black

F RJ-45 Siemon Cat 6 Ivory

M RJ-45 Siemon Cat 6 Red

S RJ-45 Siemon Cat 5E Shielded

28 RJ-45 Siemon Cat 6 Blue

29 RJ-45 Siemon Cat 6 Orange

81 RJ-45 Siemon Cat 6 Yellow

C5 RJ-45 Siemon 10G Black

2 RJ-45 SMP Cat 5E Orange

34 RJ-45 SMP Cat 6 Orange

C34 RJ-45 SMP Cat 5E Blk

96 RJ-45 w/Retractable Cord*

C35 RJ-45 Molex Cat 6 Black

C36 Cat 7 Tera Siemon

Inline 73 RJ-45 Allen Tel Inline Cat 5E

87 RJ-45 Amp Inline Cat 3

C38 RJ-45 Inline Cat 6 Keystone

Stuffer Caps 51 Stuffer Cap Hubbell Black

C1 Stuffer Cap Krone White

36 Stuffer Cap Krone Black

63 Stuffer Cap Leviton Black

53 Stuffer Cap Leviton White

92 Stuffer Cap Ortronics Black

56 Stuffer Cap Panduit Black

38 Stuffer Cap Siemon Black

22 Stuffer Cap SMP Black


Jacks and Descriptions Jack ECA# Description Jack ECA# Description







10

S-Video (SVHS)



13

3 Pin XLR Female

41 3 Pin XLR Male


25 4 Pin XLR Female

42 4 Pin XLR Male



23 6 Pin XLR Female



33 4 Pin Mini XLR


67 5 Pin XLR Female



D Door Siemon Black


Telecom Plate Type


A “A” Plate

B “B” Plate

Q “Q” Plate



E Amp 2 Port 010-0405













L




86 ¼ Stereo Female




Typical Telecom Plate Configurations Any Telecom Configuration can be done on Black or Gray plates

Connector placement on plate subject to change

# A-BL-B-B-B-B 4 RJ45 Cat 6 Data

# A-BL-B-B 2 RJ45 Cat 6 Data

# A-BL-B RJ45 Cat 6 Data

# A-BL-A-B RJ11 Cat 3 Phone and

RJ45 Cat 6 Data

EXAMPLE:Specify BL for Black

Or GR for Gray

# A-BL-A-B-B # A-GR-A-B-B

RJ11 Cat 3 Phone, 2 RJ45 Cat 6 Data

# A-BL-A-A-B-B 2 RJ11 Cat 3 Phone and

2 RJ45 Cat 6 Data

# A-BL-B-B-B 3 RJ45 Cat 6 Data

Typical Telecom Plate Configurations

# A-BL-73-73 RJ45 Cat 5E Inline

# A-BL-4-37 Mini-Stereo and 15 Pin HD VGA

# A-BL-B-B-37 2 RJ45 Cat 6 Data and 15 Pin HD VGA

# A-BL-A-B-4-37 RJ11 Cat 3 Phone, RJ45 Cat 6 Da-ta, Mini-Stereo and 15 Pin HD VGA

# A-BL-B-37 RJ45 Cat 6 Data and 15 Pin HD VGA

# A-BL-B-B-4-37 2 RJ45 Cat 6 Data, Mini-Stereo

and 15 Pin HD VGA

# A-BL-B-4-37 RJ45 Cat 6 Data, Mini-Stereo

and 15 Pin HD VGA

# A-BL-13-13 2 3 Pin XLR female

Typical Telecom Plate Configurations

# A-BL-CRDMINDER Cordminder Plate

# A-BL-4-37-77-78-79 Mini-Stereo, 15 Pin HD VGA, RCA Red,

White and Yellow

# A-BL-C9-C9 2 USB

# A-BL-Z-37 DVI and 15 Pin HD VGA

# A-BL-C9-37 15 Pin HD VGA and USB

# A-BL-A-B-C9 RJ11 Cat 3 Phone, RJ45 Cat 6 Data, USB

# A-BL-37-77-78-79 15 Pin HD VGA, RCA Red, White and Yellow

# A-BL-Z DVI

Documents

Technology Table Power Options - Coriander Designs · D Siemon 4 Port 010-0406 E Amp 2 Port 010-0405 F Leviton Black 2 Port 010-0407 G Krone 3 Port 01 0- 4 8 H Siemon CT Plate 010-0409