Upload
others
View
13
Download
0
Embed Size (px)
Citation preview
Short Form Catalogue Plastics/Rubber & Packaging Industry
Helium Projects Ltd
TTTeeemmmpppeeerrraaatttuuurrreee ssseeennnsssooorrrsss
PPPrrreeessssssuuurrreee tttrrraaannnsssddduuuccceeerrrsss
IIInnnssstttrrruuummmeeennntttaaatttiiiooonnn
HHHeeeaaatttiiinnnggg eeellleeemmmeeennntttsss
BBBaaayyyooonnneeettt aaadddaaappptttooorrrsss
RRRuuuppptttuuurrreee dddiiissscccsss
See the individual datasheets for more detailed information on each product type. Available from
www.helium.uk.net
TTTeeemmmpppeeerrraaatttuuurrreee ssseeennnsssooorrrsss
BL01 Block sensor
A surface mounting brass block, designed specifically for the plastics industry but used in other areas, which is located by a 4mm tube and is fixed into place via a bolt.
BW01 Bead Weld sensor
This sensor is the most simple type of thermocouple and is therefore inexpensive. The thermocouple junction is formed directly on the end of a length of thermocouple cable.
FS01 Flexi-couple – standard
For plastics machinery in particular, this flexible thermocouple assembly incorporates an adjustable bayonet cap, which allows for various insertion depths. Such versatility permits its use in many applications and minimises spares holding.
FS02 Flexi-couple – American
American flexi-couple assembly designed mainly for use in the plastics industry but also used in the food industry. Incorporating an adjustable bayonet cap, free running on the armoured cable, allows for various insertion depths
FS03
Flexi-couple – Italian
For plastics machinery in particular, this flexible thermocouple assembly incorporates an adjustable 2-pin bayonet cap, which allows for various insertion depths
FS04
Flexi-couple - Continental
For plastics machinery in particular, this flexible thermocouple assembly incorporates an adjustable bayonet cap, which allows for various insertion depths
LF01
Leaf sensor
A fast response sensor mounted on a 25mm x 13mm stainless steel plate, making it ideal for fitting under band and nozzle heaters. Available as a Fabricated Thermocouple only
MB01
Standard Melt Bolt
Designed to withstand the very high pressure experienced within the nozzles of plastics extruders and injection moulding machines. The thermocouples enable direct temperature measurement of the molten plastic
MB02
Twist Melt Bolt
The free running body will enable the blade style tip to be orientated, to minimize obstruction to the plastic flow, and allow the bolt to be screwed into the process without twisting the cable.
MB03 Twist Melt Bolt – Hastelloy tip
The free running body will enable the blade style tip to be orientated, to minimize obstruction to the plastic flow, and allow the bolt to be screwed into the process without twisting the cable.
MB04 Adjustable Melt Bolt
An alternative style of melt thermocouple, which allows simple, rapid adjustment of the immersion length to suit each application. The sensing tip can be positioned between 0mm and 25mm.
MB05
Twist Melt Bolt – Thermally insulated tip
The free running body will enable the blade style tip to be orientated, to minimize obstruction to the plastic flow, and allow the bolt to be screwed into the process without twisting the cable. Supplied with thermally insulated tip
MB06
Twist Melt Bolt – Fast response / Thermally insulated tip
The free running body will enable the blade style tip to be orientated, to minimize obstruction to the plastic flow, and allow the bolt to be screwed into the process without twisting the cable. Supplied with thermally insulated tip and with fast response construction
NZ01 Nozzle sensor - standard
A free-running nozzle, which allow the sensor to be threaded directly into the process without turning or twisting the wires. Available in 2 thread options (M6 or ¼” BSF)
NZ02 Nozzle sensor – probe mounted
A free-running nozzle mounted onto a 3mm diameter probe to allow the sensor to be threaded directly into the process without turning or twisting the wires
PC01
Pipe clip sensor
These are pipe clip assemblies, with cable and terminated with flying tails
SF01 Surface sensor
A bolt down surface mounting sensor brazed to a brass ‘flange’ which ensure the hot junction is in contact with the surface. Used mainly in the plastics industry but is versatile enough for use in other areas.
WR01 Washer ring sensor
Washer ring thermocouple with the hot junction located in a crimp terminal wash ring (M4, M5 or M6) for bolting down to a surface to be monitored
PPPrrreeessssssuuurrreee tttrrraaannnsssddduuuccceeerrrsss
PT460E – The classic rigid stem melt pressure transducer
The model PT460E transducer has become a standard in the polymer
industry. It is ideal for general purpose melt pressure measurements requiring simple installation, good accuracy, repeatability and reliability. Better than ±0.5% accuracy.
PT420A – High accuracy, rigid stem melt pressure transducer
The model PT420A is a rugged and reliable melt pressure transducer for
applications in which high accuracy and repeatability are required along with a rigid stem configuration. Better than ±0.25% accuracy.
PT462E – The classic flexible stem melt pressure transducer
The model PT462E has an 18" flexible stem between it's rigid stem and the
electronics housing to increase thermal isolation. It is the ideal choice for applications requiring good repeatability, accuracy and economy, and is widely accepted by OEM's throughout the world. Better than ±0.5% accuracy.
PT422A – High accuracy, flexible stem melt pressure transducer
The model PT422A is ideal for extrusion applications where accurate
process measurement is essential. Examples include pressure control at the die or wherever high accuracy melt pressure measurement is required. The PT422A features an 18" flexible stem which provides thermal isolation of the electronics housing. Better than ±0.25% accuracy.
TPT463E - The classic flexible stem melt pressure transducer with thermocouple
The model TPT463E combines a removable Type 'J' thermocouple with the classic PT462E pressure sensor to allow the user to make pressure and temperature measurements at a single point. It has a flexible stem for ease of mounting. Better than ±0.5% accuracy.
TPT432A – High accuracy, flexible stem melt pressure transducer with thermocouple The model TPT432A transducer
simultaneously measures both temperature and pressure at a single point. The pressure sensor is the same as in the PT422A with the addition of a removable thermocouple, that can be replaced during operation. Better than ±0.25% accuracy
PT4624, PT4625 & PT4626 – Amplified output flexible stem melt pressure transducer
The models PT4624, PT4625 & PT4626 add built-in amplifiers the the basic PT462E melt pressure transducer, eliminating the need for external signal conditioning. All models interface directly with distributed control systems, PLC's, computers and similar high level control devices.
PT4624: 4 to 20mA output / PT4625: 0 to 5 Vdc output / PT4626: 0 to 10 Vdc output
IIInnnssstttrrruuummmeeennntttaaatttiiiooonnn
LDE / LME – 1/16 DIN temperature controllers
SMART function – auto-tuning of control parameters / Thermocouple, RTD and linear input capabilities / Two outputs: Logic or Relay configurable /
Soft start function (output power limiting) / Built-in configuration port
LFS – 1/16 DIN controller
Thermocouple, RTD and linear input capabilities / Three outputs: Logic, Relay or isolated linear (0-20mA, 0-10V) configurable / Linear output configurable as control, retransmission of process
values or retransmission of the operative set-point / Load current measurements with alarm / RS-485 serial communications / DIN rail mounting or panel mounting
Model UPR700, 1/4 DIN pressure / process indicator with optional second input The UPR700 pressure/process indicator is a field configurable and programmable instrument with a choice of350 Ohm strain gauge, voltage or current input. A display of the process variable is shown on a bright red five digit LED display, as well as a 35 segment LED bargraph. A second digital display will capture the peak reading (selectable high or low), can be blanked, or can be used as the indicator for the optional second process variable. The UPR700 is the perfect solution for those who would like to have melt temperature and pressure read out conveniently on one instrument.
Model ATC770, 1/4 DIN self-tuning pressure and process controller
The ATC770 pressure and process controller, with it's unique self-tuning algorithm, makes it possible to set up a process such as extrusion, quickly, easily, and with a minimum of operator adjustment. Inputs include 350 Ohm strain gauge, DC voltage and DC current, making the ATC770 compatible with a wide variety of process transmitters, and thus able to control a number of factory functions. It is fully configurable with a combination of jumpers and menu options, as well as providing a selection of readout options.
Helium Projects Ltd
Projects House, 1 South Farm Industries, St Lawrence Avenue, Worthing, West Sussex, BN14 7JH.
Tel: +44 (0) 1903 211121 Fax: +44 (0) 1903 211130
email: [email protected] Website: www.helium.uk.net
HHHeeeaaatttiiinnnggg eeellleeemmmeeennntttsss
Band and Cartridge Heaters Value band – 24” Fibreglass Flexible Leads – One-piece construction Metric Hi-Temp – Internally connected with 10” Fibreglass Flexible Leads Imperial Hi-Temp – Internally connected with 10” Fibreglass Flexible Leads
A full range of both band and cartridge heaters are available upon request
BBBaaayyyooonnneeettt aaadddaaappptttooorrrsss
Thread Diameter (in mm) No. Pegs Length (in mm) 1/8” BSP 1/8” BSP 1/8” BSP 1/8” BSP 1/8” BSP
11 11 11 11 16
1 Peg 1 Peg 1 Peg 1 Peg 2 Peg
22 24 29 35 14
1/8” BSPT 1/8” BSPT 1/8” BSPT 1/8” BSPT
11 11 11 11
2 Peg 1 Peg 1 Peg 1 Peg
22 22 35 70
1/8” NPT 11 1 Peg 22 M10 x 1mm 11 1 Peg 22 M12 x 1.75 10 2 Peg 30
RRRuuuppptttuuurrreee dddiiissscccsss
Burst pressure of 3500, 5500, 7500, 8500 and 9500 psi (240, 380, 515, 585 and 655 bar) Simple, intrinsically safe design Leak – tight seal Low installation and maintenance cost Up to 400°C melt temperatures Accuracy of ± 5%
AAAcccccceeessssssooorrriiieeesss
Viscosity / Rheometers Screen changers Gear pumps