Upload
vankhanh
View
226
Download
4
Embed Size (px)
Citation preview
PULLERS
CONFIGURATION
Negative self-acting hydraulic brake
Hydraulic dynamometer with set-point and automatic control ofmaximum pull
Built-in reel winder with automaticlevel wind and special reel for 500 mof Ø 8 mm rope
ADDITIONAL DEVICES
102 Pulling rope locking devicewhen capstan is used (compulsory for EC market)
105 Rigid axle and towing bar detachable, for manual towing
107 Capstan (diameter=220 mmequipped with guide rope rollers)
111 Cable guide pivot pulley suitable for work in manhole and into ditch
200 mm
8 mm
CHARACTERISTICS
Bull-wheel diameter
Max rope diameter
500 kgMass (without rope)
13 kW (18 hp)
air
12 V
ENGINE
Gasoline
Cooling system
Electrical system
HYDRAULIC TRANSMISSION
Closed hydraulic circuit for steplessspeed variation in both rotatingdirections
HYDRAULIC PULLERARS 200
The machine is suitable to string one rope. The bull-wheel grooves are made of thermally treated steel
PERFORMANCE
Max pullSpeed at max pull
15 kN0.7 km/h
Note: the basic machine performance is calculated at 20°C and at sea level
Max speedPull at max speed
3.6 km/h4 kN
80 f
112 Type approved trailer for towing at max speed of 80 km/h with mechanical parking brake. Towing bar with inertial brakingsystem and towing hook, caravan type and eye hook Ø 40 mm. Lighting system trailer
ALL 111
TESMEC S.p.A.
HeadquartersVia Zanica, 17/O24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 224060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 Fax: +39.035.826375
Manufacturing facilitiesVia Provinciale, 26/2823844 Sirone (LC) - ItalyTel: +39.031.858311 Fax: +39.031.853562
JANUARY 2011 - PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
CONFIGURATION
Negative self-acting hydraulic brake
Hydraulic dynamometer with set-point and automatic control ofmaximum pull
Hydraulic oil cooling system
Control instruments for hydraulicsystem and Diesel engine
Rigid axle for towing at max speedof 30 km/h
Built-in self-loading reel winder withautomatic level wind, suitable forstandard reel mod. BOF 010 andBOF 020
ADDITIONAL DEVICES
Equipment for electronic stringingparameter recorder
Mechanical actuated front ploughstabiliser
Pull pre-setting system
Grounding device on board
110 Rod with roller device for underground cables
AXR 001 Extra shaft
DLR 300 Electronic pull and speedrecorder
250 mm
10 mm
CHARACTERISTICS
Bull-wheel diameter
Max rope diameter
700 kgMass
25 kW (34 hp)
water
12 V
ENGINE
Diesel
Cooling system
Electrical system
HYDRAULIC TRANSMISSION
Closed hydraulic circuit for steplessspeed variation in both rotatingdirections
HYDRAULIC PULLERARS 301
ALL 110
The machine is suitable to string one rope. The bull-wheel grooves are made of thermally treated steel
PERFORMANCE
Max pullSpeed at max pull
25 kN1.4 km/h
Note: the basic machine performance is calculated at 20°C and at sea level
Max speedPull at max speed
3.5 km/h10 kN
90 g
111 Cable guide pivot pulley suitable for work in manhole and into ditch
ALL 111
112 Type approved trailer for towing at max speed of 80 km/h with mechanical parking brake. Towing bar with inertial brakingsystem and towing hook, caravan type and eye hook Ø 40 mm. Lighting system trailer
DLR 300
TESMEC S.p.A.
HeadquartersVia Zanica, 17/O24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 224060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 Fax: +39.035.826375
Manufacturing facilitiesVia Provinciale, 26/2823844 Sirone (LC) - ItalyTel: +39.031.858311 Fax: +39.031.853562
JANUARY 2011 - PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
CONFIGURATION
Negative self-acting hydraulic brake
Hydraulic dynamometer with set-point and automatic control ofmaximum pull
Hydraulic oil cooling system
Control instruments for hydraulicsystem and Diesel engine
Rigid axle for towing at max speedof 30 km/h
Built-in self-loading reel winder withautomatic level wind, suitable forstandard reel mod. BOF 010 andBOF 020
325 mm
13 mm
CHARACTERISTICS
Bull-wheel diameter
Max rope diameter
850 kgMass
25 kW (34 hp)
water
12 V
ENGINE
Diesel
Cooling system
Electrical system
HYDRAULIC TRANSMISSION
Closed hydraulic circuit for steplessspeed variation in both rotatingdirections
HYDRAULIC PULLERARS 403
The machine is suitable to string one rope. The bull-wheel grooves are made of thermally treated steel
PERFORMANCE
Max pullSpeed at max pull
35 kN1.2 km/h
Note: the basic machine performance is calculated at 20°C and at sea level
Max speedPull at max speed
3.6 km/h12 kN
91 g
ADDITIONAL DEVICES
Equipment for electronic stringingparameter recorder
Mechanical actuated front ploughstabiliser
Pull pre-setting system
Grounding device on board
110 Rod with roller device for underground cables
AXR 001 Extra shaft
DLR 300 Electronic pull and speedrecorder
ALL 110
111 Cable guide pivot pulley suitable for work in manhole and into ditch
ALL 111 112 Type approved trailer
for towing at max speed of 80 km/h with mechanical parking brake. Towing bar with inertial brakingsystem and towing hook, caravan type and eye hook Ø 40 mm. Lighting system trailer
DLR 300
TESMEC S.p.A.
HeadquartersVia Zanica, 17/O24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 224060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 Fax: +39.035.826375
Manufacturing facilitiesVia Provinciale, 26/2823844 Sirone (LC) - ItalyTel: +39.031.858311 Fax: +39.031.853562
JANUARY 2011 - PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
CONFIGURATION
Negative self-acting hydraulic brake
Hydraulic dynamometer with set-point and automatic control ofmaximum pull
Hydraulic oil cooling system
Control instruments for hydraulicsystem and Diesel engine
Rigid axle for towing at max speedof 30 km/h with mechanical parkingbrake
Built-in self-loading reel winder withautomatic level wind, suitable forstandard reel mod. BOF 010 andBOF 020
AXR 001 Extra shaft
ADDITIONAL DEVICES
037 Preheating device for use upto -30° C
051 Equipment for remote controlvia cable (max. L. 15 m)
Equipment for electronic stringingparameter recorder
Mechanical actuated front ploughstabiliser
Grounding device on board
059 Equipment for radio control
071 Hydraulically actuated pullingrope clamp for reel changeoperation
400 mm
16 mm
CHARACTERISTICS
Bull-wheel diameter
Max rope diameter
2000 kgMass
48 kW (64 hp)
water
12 V
ENGINE
Diesel
Cooling system
Electrical system
HYDRAULIC TRANSMISSION
Closed hydraulic circuit for steplessspeed variation in both rotatingdirections. This machine is provided with a pullpre-setting system that maintainsthe pre-set pulling value (also when the speed is reduced to “0”)by automatically adjusting the operation speed according to thefriction and unexpected loads whichmay develop along the line
HYDRAULIC PULLERARS 400
The machine is suitable to string one rope. The bull-wheel grooves are made of thermally treated steel. The machine is completely electronically controlled
PERFORMANCE
Max pullSpeed at max pull
45 kN2 km/h
Note: the basic machine performance iscalculated at 20°C and at sea level
Max speedPull at max speed
5 km/h17.5 kN
120 h
DLR 300 Electronic pull and speedrecorder
TESMEC S.p.A.
HeadquartersVia Zanica, 17/O24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 224060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 Fax: +39.035.826375
Manufacturing facilitiesVia Provinciale, 26/2823844 Sirone (LC) - ItalyTel: +39.031.858311 Fax: +39.031.853562
JANUARY 2011 - PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
PERFORMANCE CONFIGURATION
Negative self-acting hydraulic brake
Hydraulic dynamometer with set-point and automatic control ofmaximum pull
Hydraulic oil cooling system
Control instruments for hydraulicsystem and Diesel engine
Rigid axle for towing at max speed of 30 km/h
Built-in self-loading reel winder withautomatic level wind, suitable forstandard reel mod. BOF 010 and BOF020
Pull pre-setting system
Equipment for electronic stringingparameter recorder
Mechanical actuated front plough stabiliser
Grounding device on board
CHARACTERISTICS
Max pullSpeed at max pull
70 kN1.8 km/h
Bull-wheel diameter 400 mm
Max rope diameter 16 mm
Mass 2100 kg
60 kW (81 hp)
water
12 V
ENGINE
HYDRAULIC TRANSMISSION
Diesel
Cooling system
Electrical system
Closed hydraulic circuit for steplessspeed variation in both rotatingdirections
Note: the basic machine performance iscalculated at 20°C and at sea level
Max speedPull at max speed
4 km/h32 kN
HYDRAULIC PULLERARS 510
037
The machine is suitable to string one rope. The bull-wheel grooves are made of thermally treated steel
ADDITIONAL DEVICES
Preheating device for use upto -30° C
AXR 001 Extra shaft
DLR 300 Electronic pull and speedrecorder
121 c
071 Hydraulically actuated pullingrope clamp for reel changeoperation
111 Cable guide pivot pulley suitable for work in manhole and into ditch
ALL 111
DLR 300
TESMEC S.p.A.
HeadquartersVia Zanica, 17/O24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 224060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 Fax: +39.035.826375
Manufacturing facilitiesVia Provinciale, 26/2823844 Sirone (LC) - ItalyTel: +39.031.858311 Fax: +39.031.853562
JANUARY 2011 - PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
CONFIGURATION
Negative self-acting hydraulic brake
Hydraulic dynamometer with set-point and automatic control ofmaximum pull
Hydraulic oil cooling system
Control instruments for hydraulicsystem and Diesel engine
Rigid axle for towing at max speedof 30 km/h with mechanical parkingbrake
Built-in self-loading reel winder withautomatic level wind, suitable forstandard reel mod. BOF 010 andBOF 020
089 Connection of multiplemachines and electronicspeed synchronizing system
ADDITIONAL DEVICES
037 Preheating device for use upto -30° C
051 Equipment for remote controlvia cable (max. L. 15 m)
Equipment for electronic stringingparameter recorder
Hydraulically actuated front ploughstabiliser
Grounding device on board
059 Equipment for radio control
071 Hydraulically actuated pullingrope clamp for reel changeoperation
450 mm
18 mm
CHARACTERISTICS
Bull-wheel diameter
Max rope diameter
3250 kgMass
104 kW (140 hp)
water
12 V
ENGINE
Diesel
Cooling system
Electrical system
HYDRAULIC TRANSMISSION
Closed hydraulic circuit for steplessspeed variation in both rotatingdirections. This machine is provided with a pullpre-setting system that maintainsthe pre-set pulling value (also whenthe speed is reduced to “0”) by automatically adjusting the operationspeed according to the friction and unexpected loads which maydevelop along the line
HYDRAULIC PULLERARS 500
The machine is suitable to string one rope. The bull-wheel grooves are made of thermally treated steel. The machine is completely electronically controlled
PERFORMANCE
Max pullSpeed at max pull
90 kN2.4 km/h
Note: the basic machine performance is calculated at 20°C and at sea level
Max speedPull at max speed
5 km/h44 kN
130 i
AXR 001 Extra shaft
DLR 300 Electronic pull and speedrecorder
TESMEC S.p.A.
HeadquartersVia Zanica, 17/O24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 224060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 Fax: +39.035.826375
Manufacturing facilitiesVia Provinciale, 26/2823844 Sirone (LC) - ItalyTel: +39.031.858311 Fax: +39.031.853562
JANUARY 2011 - PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
CONFIGURATION
2 negative self-acting hydraulic brakes
2 hydraulic dynamometers with set-point and automatic control ofmaximum pull
Hydraulic oil cooling system
Control instruments for hydraulicsystem and Diesel engine
Rigid axle for towing at max speedof 30 km/h with mechanical parkingbrake
2 built-in self-loading reel winderswith automatic level wind, suitablefor standard reel mod. BOF 010 andBOF 020
Equipment for electronic stringing parameter recorder
Hydraulically actuated front ploughstabiliser
Grounding device on board
ADDITIONAL DEVICES
037 Preheating device for use upto -30° C
051 Equipment for remote controlvia cable (max. L. 15 m)
059 Equipment for radio control
071 2 hydraulically actuated pullingrope clamps for reel change operation
540 mm
18 mm
CHARACTERISTICS
Bull-wheel diameter
Max rope diameter
4500 kgMass
82 kW (110 hp)
water
12 V
ENGINE
Diesel
Cooling system
Electrical system
HYDRAULIC TRANSMISSION
2 closed hydraulic circuits for stepless speed variation in both rotating directions. This machine is provided with 2 pull pre-setting systems that maintain the pre-set pulling value(also when the speed is reduced to “0”) by automatically adjustingthe operation speed according to thefriction and unexpected loads whichmay develop along the line
HYDRAULIC PULLERARB 501
The machine is suitable to string one or two independent ropes. The bull-wheel grooves are made of thermally treated steel
PERFORMANCE
Max pullor
Speed at max pull
2 x 40 kN1 x 80 kN2.4 km/h
Note: the basic machine performance is calculated at 20°C and at sea level
Max speedPull at max speed
or
5 km/h2 x 15 kN1 x 30 kN
131
AXR 001 Extra shaft
DLR 300 Electronic pull and speedrecorder
TESMEC S.p.A.
HeadquartersVia Zanica, 17/O24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 224060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 Fax: +39.035.826375
Manufacturing facilitiesVia Provinciale, 26/2823844 Sirone (LC) - ItalyTel: +39.031.858311 Fax: +39.031.853562
JANUARY 2011 - PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
PERFORMANCE CONFIGURATION
Negative self-acting hydraulic brake
Hydraulic dynamometer with set-point and automatic control ofmaximum pull
Hydraulic oil cooling system
Control instruments for hydraulicsystem and Diesel engine
Rigid axle for towing at max speed of 30 km/h
Built-in self-loading reel winder withautomatic level wind, suitable forstandard reel mod. BOF 020
CHARACTERISTICS
Max pullSpeed at max pull
140 kN2 km/h
Bull-wheel diameter 600 mm
Max rope diameter 24 mm
Mass 4800 kg
129 kW (173 hp)
water
12 V
ENGINE
HYDRAULIC TRANSMISSION
Diesel
Cooling system
Electrical system
Closed hydraulic circuit for steplessspeed variation in both rotatingdirections
Note: the basic machine performance iscalculated at 20°C and at sea level
Max speedPull at max speed
4,5 km/h60 kN
HYDRAULIC PULLERARS 606
037
The machine is suitable to string one rope. The bull-wheel grooves are made of thermally treated steel
ADDITIONAL DEVICES
Preheating device for use upto -30° C
Equipment for electronic stringingparameter recorder
Hydraulically actuated front ploughstabiliser
Grounding device on board
AXR 001 Extra shaft
DLR 300 Electronic pull and speedrecorder
Pull pre-setting system
132 c
071 Hydraulically actuated pullingrope clamp for reel changeoperation
111 Cable guide pivot pulley suitable for work in manhole and into ditch
ALL 111
DLR 300
TESMEC S.p.A.
HeadquartersVia Zanica, 17/O24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 224060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 Fax: +39.035.826375
Manufacturing facilitiesVia Provinciale, 26/2823844 Sirone (LC) - ItalyTel: +39.031.858311 Fax: +39.031.853562
JANUARY 2011 - PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
001 Lighting system for the trailer
002 Pneumatic brake system for the trailer
AXR 001 Extra shaft
089
ADDITIONAL DEVICES
037 Preheating device for use upto -30° C
010 Hydraulic power pack to control a separate reel winder
022 Hydraulic quick connectors tocontrol a separate reel winderinstead of the built-in one
051 Equipment for remote controlvia cable (max. L. 15 m)
053 Equipment for electronic stringing parameter recorder
059 Equipment for radio control
070 Roller device for second pullingrope
071 Hydraulically actuated pullingrope clamp for reel changeoperation
600 mm
24 mm
CHARACTERISTICS
Bull-wheel diameter
Max rope diameter
6000 kgMass
209 kW (280 hp)
water
24 V
ENGINE
Diesel
Cooling system
Electrical system
HYDRAULIC TRANSMISSION
Closed hydraulic circuit for steplessspeed variation in both rotatingdirections. This machine is provided with a pull pre-setting system that maintains the pre-set pulling value(also when the speed is reduced to “0”) by automatically adjustingthe operation speed according to thefriction and unexpected loads whichmay develop along the line
CONFIGURATION
Negative self-acting hydraulic brakeHydraulic dynamometer with set-point and automatic control of maximum pullHydraulic oil cooling systemControl instruments for hydraulicsystem and Diesel engineRigid axle for towing at max speedof 30 km/h with mechanical parkingbrakeBuilt-in self-loading reel winder withautomatic level wind, suitable forstandard reel mod. BOF 010 andBOF 020Hydraulically actuated front ploughstabiliserGrounding device on board
HYDRAULIC PULLERSARS 700ARS 701
The machine is suitable to string one rope. The bull-wheel grooves are made of thermally treated steel. The machine is completely electronically controlled
PERFORMANCE Mod. ARS 700
Max pullSpeed at max pull
160 kN2.5 km/h
Note: the basic machine performance is calculated at 20°C and at sea level
Max speedPull at max speed
5 km/h80 kN
160 i
PERFORMANCE Mod. ARS 701
Max pullSpeed at max pull
180 kN2.2 km/h
Max speedPull at max speed
5 km/h80 kN
DLR 300 Electronic pull and speedrecorder
Connection of multiplemachines and electronicspeed synchronizing system
TESMEC S.p.A.
HeadquartersVia Zanica, 17/O24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 224060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 Fax: +39.035.826375
Manufacturing facilitiesVia Provinciale, 26/2823844 Sirone (LC) - ItalyTel: +39.031.858311 Fax: +39.031.853562
JANUARY 2011 - PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
CONFIGURATION
2 negative self-acting hydraulic brakes
2 hydraulic dynamometers with set-point and automatic control ofmaximum pull
Hydraulic oil cooling system
Control instruments for hydraulicsystem and Diesel engine
Rigid axle for towing at max speedof 30 km/h with mechanical parkingbrake
2 built-in self-loading reel winderswith automatic level wind, suitablefor standard reel mod. BOF 010 andBOF 020
Hydraulically actuated front ploughstabiliser
Grounding device on board
001 Lighting system for the trailer
002 Pneumatic brake system for the trailer
AXR 001 Extra shaft
ADDITIONAL DEVICES
037 Preheating device for use upto -30° C
051 Equipment for remote controlvia cable (max. L. 15 m)
053 Equipment for electronic stringing parameter recorder
059 Equipment for radio control
071 2 hydraulically actuated pullingrope clamps for reel change operation
600 mm
24 mm
CHARACTERISTICS
Bull-wheel diameter
Max rope diameter
8500 kgMass
209 kW (280 hp)
water
24 V
ENGINE
Diesel
Cooling system
Electrical system
HYDRAULIC TRANSMISSION
2 closed hydraulic circuits for stepless speed variation in both rotating directions. This machine is provided with 2 pull pre-setting systems that maintain the pre-set pulling value(also when the speed is reduced to “0”) by automatically adjustingthe operation speed according to thefriction and unexpected loads whichmay develop along the line
HYDRAULIC PULLERSARB 600ARB 707
The machine is suitable to string one or two independent ropes. The bull-wheel grooves are made of thermally treated steel. The machine is completely electronically controlled
PERFORMANCE Mod. ARB 600
Max pullor
Speed at max pull
2 x 75 kN1 x 150 kN
2.6 km/h
Note: the basic machine performance is calculated at 20°C and at sea level
Max speedPull at max speed
or
4.5 km/h2 x 45 kN1 x 90 kN
165
PERFORMANCE Mod. ARB 707
Max pullor
Speed at max pull
2 x 90 kN1 x 180 kN
2.2 km/h
Max speedPull at max speed
or
4.5 km/h2 x 45 kN1 x 90 kN
DLR 300 Electronic pull and speedrecorder
TESMEC S.p.A.
HeadquartersVia Zanica, 17/O24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 224060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 Fax: +39.035.826375
Manufacturing facilitiesVia Provinciale, 26/2823844 Sirone (LC) - ItalyTel: +39.031.858311 Fax: +39.031.853562
JANUARY 2011 - PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
001 Lighting system for the trailer
002 Pneumatic brake system for the trailer
AXR 002 Extra shaft
ADDITIONAL DEVICES
010 Hydraulic power pack to control a separate reel winder
022 Hydraulic quick connectors tocontrol a separate reel winderinstead of the built-in one
037 Preheating device for use upto -30° C
051 Equipment for remote controlvia cable (max. L. 15 m)
059 Equipment for radio control
070 Roller device for the secondpulling rope
071 Hydraulically actuated pullingrope clamp for reel changeoperation
800 mm
32 mm
CHARACTERISTICS
Bull-wheel diameter
Max rope diameter
9500 kgMass
280 kW (375 hp)
water
24 V
ENGINE
Diesel
Cooling system
Electrical system
HYDRAULIC TRANSMISSION
Closed hydraulic circuit for steplessspeed variation in both rotatingdirections. This machine is provided with 2 pull pre-setting systems that maintain the pre-set pulling value(also when the speed is reduced to“0”) by automatically adjusting theoperation speed according to thefriction and unexpected loads whichmay develop along the line
CONFIGURATION
Negative self-acting hydraulic brake
Hydraulic dynamometer with set-point and automatic control ofmaximum pull
Hydraulic oil cooling system
Control instruments for hydraulicsystem and Diesel engine
Rigid axle for towing at max speedof 30 km/h with mechanical parkingbrake
Built-in self-loading reel winder withautomatic level wind, suitable forstandard reel mod. BOF 020 andBOF 030
Hydraulically actuated front ploughstabiliser
Grounding device on board
HYDRAULIC PULLERARS 802
The machine is suitable to string one rope. The bull-wheel grooves are made of thermally treated steel. The machine is completely electronically controlled
PERFORMANCE
Max pullSpeed at max pull
240 kN 2.5 km/h
Note: the basic machine performance is calculated at 20°C and at sea level
Max speedPull at max speed
4.5 km/h130 kN
192 b
NEW
089
053 Equipment for electronic stringing parameter recorder
DLR 300 Electronic pull and speedrecorder
Connection of multiplemachines and electronicspeed synchronizing system
TESMEC S.p.A.
HeadquartersVia Zanica, 17/O24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 224060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 Fax: +39.035.826375
Manufacturing facilitiesVia Provinciale, 26/2823844 Sirone (LC) - ItalyTel: +39.031.858311 Fax: +39.031.853562
JANUARY 2011 - PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
001 Lighting system for the trailer
002 Pneumatic brake system for the trailer
AXR 002 Extra shaft
ADDITIONAL DEVICES
010 Hydraulic power pack to control a separate reel winder
022 Hydraulic quick connectors tocontrol a separate reel winderinstead of the built-in one
037 Preheating device for use upto -30° C
051 Equipment for remote controlvia cable (max. L. 15 m)
059 Equipment for radio control
070 Roller device for the secondpulling rope
071 Hydraulically actuated pullingrope clamp for reel changeoperation
960 mm
38 mm
CHARACTERISTICS
Bull-wheel diameter
Max rope diameter
13500 kgMass
328 kW (440 hp)
water
24 V
ENGINE
Diesel
Cooling system
Electrical system
HYDRAULIC TRANSMISSION
Closed hydraulic circuit for steplessspeed variation in both rotatingdirections. This machine is provided with a pull pre-setting system that maintains the pre-set pulling value(also when the speed is reduced to“0”) by automatically adjusting theoperation speed according to thefriction and unexpected loads whichmay develop along the line
CONFIGURATION
Negative self-acting hydraulic brake
Hydraulic dynamometer with set-point and automatic control ofmaximum pull
Hydraulic oil cooling system
Control instruments for hydraulicsystem and Diesel engine
Rigid axle for towing at max speedof 30 km/h with mechanical parkingbrake
Built-in self-loading reel winder withautomatic level wind, suitable forstandard reel mod. BOF 020 andBOF 030
Hydraulically actuated front ploughstabiliser
Grounding device on board
HYDRAULIC PULLERARS 907
The machine is suitable to string one rope. The bull-wheel grooves are made of thermally treated steel. The machine is completely electronically controlled
PERFORMANCE
Max pullSpeed at max pull
280 kN 2.2 km/h
Note: the basic machine performance is calculated at 20°C and at sea level
Max speedPull at max speed
5 km/h117 kN
194 h
053 Equipment for electronic stringing parameter recorder
DLR 300 Electronic pull and speedrecorder
TESMEC S.p.A.
HeadquartersVia Zanica, 17/O24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 224060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 Fax: +39.035.826375
Manufacturing facilitiesVia Provinciale, 26/2823844 Sirone (LC) - ItalyTel: +39.031.858311 Fax: +39.031.853562
JANUARY 2011 - PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
001 Lighting system for the trailer
002 Pneumatic brake system for the trailer
AXR 002 Extra shaft
ADDITIONAL DEVICES
010 Hydraulic power pack to control a separate reel winder
022 Hydraulic quick connectors tocontrol a separate reel winderinstead of the built-in one
037 Preheating device for use upto -30° C
051 Equipment for remote controlvia cable (max. L. 15 m)
059 Equipment for radio control
070 Roller device for the secondpulling rope
071 Hydraulically actuated pullingrope clamp for reel changeoperation
960 mm
38 mm
CHARACTERISTICS
Bull-wheel diameter
Max rope diameter
14000 kgMass
328 kW (440 hp)
water
24 V
ENGINE
Diesel
Cooling system
Electrical system
HYDRAULIC TRANSMISSION
Closed hydraulic circuit for steplessspeed variation in both rotatingdirections. This machine is provided with apull presetting system that maintains the pre-set pulling value(also when the speed is reduced to“0”) by automatically adjusting theoperation speed according to thefriction and unexpected loads whichmay develop along the line
CONFIGURATION
Negative self-acting hydraulic brake
Hydraulic dynamometer with set-point and automatic control ofmaximum pull
Hydraulic oil cooling system
Control instruments for hydraulicsystem and Diesel engine
Rigid axle for towing at max speedof 30 km/h with mechanical parkingbrake
Built-in self-loading reel winder withautomatic level wind, suitable forstandard reel mod. BOF 020 andBOF 030
Hydraulically actuated front ploughstabiliser
Grounding device on board
HYDRAULIC PULLERARS 910
The machine is suitable to string one rope. The bull-wheel grooves are made of thermally treated steel. The machine is completely electronically controlled
PERFORMANCE
Max pullSpeed at max pull
360 kN 2 km/h
Note: the basic machine performance is calculated at 20°C and at sea level
Max speedPull at max speed
4,3 km/h160 kN
199 e
053 Equipment for electronic stringing parameter recorder
DLR 300 Electronic pull and speedrecorder
TESMEC S.p.A.
HeadquartersVia Zanica, 17/O24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 224060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 Fax: +39.035.826375
Manufacturing facilitiesVia Provinciale, 26/2823844 Sirone (LC) - ItalyTel: +39.031.858311 Fax: +39.031.853562
JANUARY 2011 - PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE