THE CLEANEST ENERGY SOLUTIONS - WasteEnergywasteenergy.gr/brochures/WasteEnergy-Green_Energy_Solution.pdf · The technology The FlexEnergy Group with its tech-nology orianted background

the cleanest power producti

on

T H E C L E A N E S T E N E R G Y S O L U T I O N S

Flexible “green” solutions

for electric and heat energy production

when people, money and timing

really count

T H E C L E A N E S T E N E R G Y S O L U T I O N S

S.A. was founded late 2012 in Ioannina

Greece as an extension of the, shareholder Swedish company,

SCIN AB & Partners’s general WasteEnergy concept.

S.A.’s business activities are concentrated in the

Waste-to-Energy sector, providing commercial, construction, maintenance and

consulting services. The company’s primary fields of expertise are focused on the:

Production of continuous energy (with almost zero emissions), using a broad range

of gas-sources, including previously unusable ultra-low quality gas.

Construction and management of innovative high efficiency biogas production plants.

Waste management consulting.

the future drives us to green energy

exec

utive

sum

mar

y

THE CLEANEST ENERGY SOLUTIONS 4 5

S.A.’s solutions enables the production of

heat and electrical energy with nearly zero emissions, by the use of a

wide range of (un)purified gas-fuel sources including extremely low

quality gases, by the use of common production processes waste heat

(co-generation) or with stable mainly thermophilic high efficiency biogas

installations. The group’s personnel specialization, flexibility, innovative

technology, decades of experience and personal commitment to every

single project, guarantees the implementation of customized optimal

solutions and maintenance of stable power production.

Mission statementS.A. will combine and steer innovative

and green solutions, processes and concepts in order to actively

participate in solving crucial society and environmental waste

problems, turning them into smart, profitable and valuable future

proof ecological sources of energy.

Human & EnvironmentS.A. aims to be part of the solution to the

current environmental issues and to positively influence people’s

quality of life. This is a strong principle fully applicable to the

purposes and objectives of the company, holding a leading role in the

company’s strategy. We are convinced that business, profit, people

and environment are equally important factors in order to ensure the

common long-term success of all!

Α completesystem that

convertsmethane into

clean energywith almost

zero emissions.

Collaborations has established key-

partnerships with EECT-Turbomachinery

BV (official representative of the Flex micro-

turbines) and with OGIN Biogas Technology BV

(joint venture OGIN, Schachtbau, ACRRES, Metaalwerk,

Hellebrekers and others), allowing the company to provide, to

install and to serve:

the cleanest power stations in the market

the only low caloric gas power station (1,5% methane) in the market

the latest and stable high efficiency Biogas installations in the market.

OGIN is a company based in the Netherlands and is specialized in the

design, installation and maintenance of innovative and high quality bio-

gas facilities for the agriculture and the industry sector. Based on clas-

sical and modern industrial concepts in these sectors, OGIN develops

and delivers stable and high performance biogas solutions suitable

accordingly for “liquid” respectively “dry” methanisation processes.

EECT-Turbomachinery is a European company specialised

in combustion technologies and official sales partner of the

FlexEnergy Group.

THE CLEANEST ENERGY SOLUTIONS

6 7

The technologyThe FlexEnergy Group with its tech-

nology orianted background is reputed

for top technological solutions through its

commitment to develop the cleanest energy

platforms in the world· the Flex Turbine MT250

and the Flex Powerstation FP250. This dedication,

combined with profound know-how and extensive

expertise, has turned the FlexEnergy Group into one of

the fastest developing industries in the market.

FlexEnergy Group possesses the cleanest engineering tech-

nology for internal combustion turbines. The FlexEnergy Group’s

energy platforms are promoted and installed by the partnership of

EECT-Turbomachinery and , as most appropri-

ate for its target collaborations in the public and private sector. They all use

gases containing methane and natural gas, for the production of basic energy

loads and the reduction of greenhouse gases. More specifically, these stations

are:

The Flex Powerstation FP250, which runs on the widest range of fuels down to

as low as 5% methane, while delivering emissions that are almost undetectable.

The Flex Turbine MT 250 EX, an air turbine to be used with an external heat

source that can be customized and easily integrated into an existing power gen-

eration process.

The Flex Turbine MT250 G3, the third generation of FlexEnergy’s proven gas

turbines, which offers specific tested enhancements in its performance.

THE CLEANEST COMBUSTION TECHNOLOGY AVAILABLE TODAY

THE CLEANEST ENERGY SOLUTIONS8 9

S.A. & Partners main target is to install and

service innovative technologies either through direct sale & maintenance

to local parts in both private and public sector, or through the installation,

operation and exploitation of the technology for the company’s own and

/or participating investors behalf under various types of collaboration.

An effort fully supported by our international group, network and

people with many years of expertise in the investment and energy

sectors.

prop

osal

The proposalThe partnership of EECT-Turbomachinery and deploying the

innovative Flexenergy technology, utilizes broad fuel sources, including otherwise unusable

low quality gases from industrial processes and other activities, in order to produce clean

energy.

Applications:

Active or inactive landfills

Sewage waste processing installations

Biogas plants from anaerobic digestion of biomass

Biomass combustion

Cogeneration of energy in industrial, commercial and residential applications

Enterprises in the exploitation of natural gas and oil

Concentrated solar power plants (CSP)

The partnership of EECT-Turbomachinery and promotes and

installs the FlexEnergy power stations and turbines. The service support and spare parts

of these installations are provided from EECT-Turbomachinery’s central facility in the

Netherlands. They include monitoring and synchronization on a 24/7 basis over the Internet

as well as local service support within 48 hours.

The implementation of the eco-friendly FlexEnergy Group’s electric and thermal power

stations, installed by the partnership of EECT-Turbomachinery and

is a proposal not only ecological but also financially sound, due to the high prices of energy

produced from renewable sources and enjoys the expertise and service support of the

world leaders in this field.

The legal framework regarding Renewable Energy Sources (RES), which ensures the

sale of produced power and energy savings in commercial, industrial and residential

implementations, guarantees the profitability of the corresponding technological investment.

THE CLEANEST ENERGY SOLUTIONS11

• Generates reliable power that provides

energy security and the ability to supply

electricity to priority loads in the event of

a grid outage.

• Has a long-term field operating record in

diverse applications and environments.

• Contains an internal waste heat recovery

system that results in a compact

footprint.

• Provides heating/cooling capability in

addition to electricity resulting in energy

savings over time.

• Hedges against increasing electricity

prices by ensuring predictable costs.

• Increases power output in colder

temperatures.

• Performs in the harsh environments

due to its durable, rugged design.

• Has low emissions as a result of its

patented low-N Ox combustor.

• Recuperates engine heat to enhance

turbine efficiency.

• Has integrated fuel-gas booster

available.

• Is CARB Certified for landfill gas, digester

gas and natural gas


HOW IT WORKSThe Flex Turbine™ MT250 operates effectively using a wide range of gaseous

fuels. Its ability to adjust the combustion turbine technology, allows the MT250 to make

clean and efficient fuel consumption of a broad spectrum of caloric values - even with

gas 30% methane content. Thus, low-fuel blends (biogas) or too high in energy (natural

gas) that other technologies are unable to exploit, the MT250 reclaims them.

Advantages of a Flex Turbine™ MT250

Ultra-clean

electricity and

useful thermal

energy is

generated from a

rugged and efficient

turbine system.

A Turbine for the timesGas turbine-powered generators

represent the cleanest combustion

technology available today. The

250 kW Flex Turbine™ leads the

way with its clean, low emissions

technology as the very best way to

consume less and generate more.

At the heart of this extraordinary

equipment is a simple, powerful

single-shaft design that has proven

to be one of the most reliable and

rugged in its class.

The MT250 successfully operates in a variety of environments.

Combined Heat and Power (CHP)

The 250kW system provides clean, continuous power to a facility

while it recovers heat for greater efficiency in on site heating,

cooling and hot water systems. It is the cleanest burning and

most robust gas turbine suitable for industrial or commercial

applications, such as medical facilities, universities, public

buildings.

Renewable Fuel Sources

FlexEnergy technology enables customers to generate continu-

ous energy from methane while attaining low emissions of NOx,

CO and VOC’s. The technology is suitable for landfills, waste

water treatment plants, food processing facilities, breweries,

agricultural waste handling facilities and biomass plants.

Oil & Gas Production

Hydrocarbon fuels can result from many operations along the

oil/gas recovery stream. “Raw” gases associated with upstream

recovery operations can often be conditioned for direct use

with a turbine. Hydrocarbon constituents can be used as fuel

as long as sufficient dew point suppression can be maintained.

Overhead vapors from downstream processing with significant

ethane and propane content represent good opportunity fuel

gases.

Flex Turbine ΜΤ250™


prod

ucts

12 13

The MT250 G3 is a complete system for producing electricity and thermal energy with a gas turbine.

The MT250 G3, the third generation of FlexEnergy’s proven gas

turbine with nearly one million operating hours in the field,

boasts the following improvements:

CHARACTERISTICSNominal Electrical Output 250kW

Minimum Fuel Higher Heating Value 300Btu/scf

Minimum Fuel Supply Pressure 80-115 psig

NOx Concentration in Exhaust Gas <5ppm

CO Concentration in Exhaust Gas <5ppm

Heat Rate (HHV) 12645 Btu/kWh

Electrical Efficiency (LHV) 30%

Exhaust Gas Temperature 450-5000 F

Exhaust Gas Mass Flow 4.7 lb/sec

System Weight 14500 lbs

System Footprint 11 ft x 7 ft

STRENGTHS

Low Emissions; Carb Certified

High Maximum Output

Regulatory Compliance

Long Term Field Operating Experience

Robust System Design

MARKETS

Higher Quality Fuel Sources

Cogeneration Applications

Active Landfills

Associated Petroleum Gas

Digester Gas

Natural Gas Systems

The Flex MT250 EX is a gas turbine, which takes advantage of hot air from an external heat source to produce electricity.

This system provides customers the flexibility to produce electricity and use-

ful thermal energy through their applications. The Flex MT250 EX is the only

turbine in its class to offer such options to the customer.

CHARACTERISTICS

Nominal Electrical Output 250kW

Air Mass Flow Rate 2,13 kg/sec. (4,7lb/sec.)

Package Footprint 3.35 mx2.13 m (11ft x 7ft)

STRENGTHS

- Easy Integration to Custom Processes or

Systems

- Comprehensive Development Packaging

- Robust System Design

- Compact Power Source

- Integrated High Effectiveness Recuperator

MARKETS

Ideal for applications such as biomass combustion. Concentrated Solar

Power (CSP) heating and heat capture from industrial processes.

Flex Turbine ΜΤ250 G3 Flex Turbine ΜΤ250 EX

prod

ucts



GAS TURBINE CYCLE

Generating clean energy from greenhouse gas sources such as landfills, digesters, coal mines, oil fields and industrial processes is beyond the capability of existing energy technologies.

The Flex Powerstation™ (FP) now fills this gap with its ability to utilize all sources of methane.

The Flex Powerstation™ is the integration of an oxidizer sys-

tem (instead of conventional internal combustion engine) and a

FlexEnergy turbine, that creates an electricity and thermal energy

production system with almost zero emissions and a wide range

of gaseous fuels. The FP250 is able to operate on dilute gas

streams with as little as 1.5 % methane content. The FP250 toler-

ates siloxanes and moisture.

Near Zero emissions

Fuel Flexibility (50 Btu/scf to 2,000+)

<1 ppm NOx and CO Emissions

Minimal Fuel Conditioning

Low Maintenance

Integrated Heat Recovery

Nominal Electrical Output1 250kW

Minimum Fuel Higher Heating Value 1.9 MJ/m3 (50Btu/scf)

Fuel Supply Pressure Range 21-34 kPa (3-5 psig)

NOx Concentration in Exhaust Gas <1ppm

CO Concentration in Exhaust Gas <1ppm

Heat Rate (HHV)1 15400 kJ/kWh (14600 Btu/kWh)

Exhaust Gas Temperature 232-2600C (450-5000 F)

Exhaust Gas Mass Flow1 2.13 kg/s (4.7 lb/sec)

System Weight 24500 kg (540000 lbs)

System Footprint732cm x 274 cm x 716 cm tall (24 ft x 9 ft x 23.5 ft)

Advantages of the Flex Powerstation™

Generates electricity from existing gas sources at landfills, anaerobic

digester applications, such as wastewater treatment plants or dairy farms,

coal mines, industrial plants and oil fields.

Eliminates the need for gas compression and prior siloxane removal

Runs equally well on 100% (1000 Btu/scf), 50% (500 Btu/scf), 15% (150 Btu/scf)

and 5% (50 Btu/scf) methane fuel.

Operates cleanly and efficiently with a wide range of fuels including fuels

with varying energy content.

Produces emissions (NOx, CO, VOCs) below 1ppm, significantly lower than

those from other power plants and flares.

Integrates two proven and mature technologies – gas turbine technology

with thermal oxidation – in a ground-breaking fashion.

Scales to match the available gas energy.

Low cost service.

FLEX

POW

ERST

ATIO

N™

MARKETS

PRODUCTION OF RENEWABLE

ENERGY SOURCE

• Landfills

• Coal Mines

• Wastewater Treatment Plants

• Agricultural processing plants,

dairies, industrial waste etc. by

anaerobic digestion

• Biogas-Tail Gases

ADDITIONAL GAS SOURCES

• Associated Petroleum Gas

• Gas fields

• Preparation of Natural Gas Pipeline (gas)

• Flue gas from other applications

• Natural Gas Pipeline

Flex Powerstation™


16 17

The Flex Powerstation™ eliminatesthe complexity and expense offuel conditioning required by

traditional technologies.

HOW the Flex Powerstation™ WORKSThe Flex Powerstation™ is the only solution of pure

energy that works directly with a gas of low BTU.

Figure 1 shows a traditional gas turbine station:

In conventional technologies, compressed fuel is

injected into compressed air and combusted to raise

the temperature even further. This high-temperature

and high pressure fuel/air mixture spins the turbine at

high speeds to generate electricity. Each fuel is different

and therefore requires its own compressor, clean-up

and unique combustor. The siloxane removal and fuel

conditioning system is the weakest link in traditional

gas power plants. The fuel conditioning consumes up to

20% of the power generated. Such fuel conditioning and

siloxanes removal are substantially eliminated with the

Flex Powerstation™, as shown in Figure 2.

Figure 2 shows the operation of Flex Powerstation™

with its unique characteristics - of discrete box at the

bottom of the chart. Fuel is aspirated with air forming

a fuel/air mixture of 15 Btu / cft that is compressed.

The energy released is oxidized by the Flexidizer in a

gradual oxidizer. The high temperature and pressure

developed in the oxidizer is then used to spin the tur-

bine and generate electricity. The Flex Powerstation™

does not require a fuel compressor or fuel processing.

Regardless of the initial fuel Btu content, diluted with

air at 15 Btu / cft (1,5% methane, or 1.5% of the power of

natural gas).

Fuel FlexibiltyThe Flex Powerstation™ efficiently operates on a wide variety of fuel sources,

including waste gas with as little as 5% methane.

EmissionsFlex Powerstation™ emissions are slated to meet the stringent California Air

Resources Board 2013 regulations for waste gas and are over 30 times lower than

the U.S. average for existing power plants.

The table below represents a comparison of emissions data between the

Flex Powerstation™, current emissions standards and future emissions stan-

dards. (Emissions Standards diagram. PPMV @15% O2.)

figure 1

figure 2

FLEX POWER

STATION™

Over 300 million tons of man-relatedmethane seeps into the atmosphere each

year from locations around the world.


The Flex Powerstation™ runs on the widest range of gaseous fuels

down to as low as 5% methane while delivering emissions that are almost

undetectable.

uniq

ue

solu

tion

With the ability to run on ultra

low quality methane, the combi-

nation of micro-turbine and

thermo oxidiser technology

being installed at the closed

Santiago Canyon Landfill site

in California will be the biggest

landfill gas project delivered be

FlexEnergy Group so far.

Flex Powerstation™ FP 250

the only solution for Inactive landfills that generate gases discharged freely into the atmosphere, polluting our environ-

ment for many decades. The environmental problem caused has now a unique solution.

The Flex Powerstation™ (FP), working on low caloric gases, is the only station that converts the problem into efficient and

profitable use. The FP 250 offers the sole holistic solution with no need of fuel conditioning. The Flex Powerstation™, not

only produce energy from otherwise useless gases, but also relieves the atmosphere of pollutants.

THE CLEANEST ENERGY SOLUTIONS20

PUBLIC BUILDING

The Phillip Burton Federal Building in San Francisco is the

largest federal building in the western US. Built in 1959 this

21-floor multi purpose federal facility has a 24/7 demand for

both electricity and heat. A study was completed to first cap-

ture and measure the facilities’ energy usage, then select the

technology to best fit the load profile and achieve the maximum

available energy savings. The Flex turbine MT250 gas turbine

was chosen. It provides round the clock power and heat thereby

reducing base load power consumption by 250 kW/ht and also

generates up to 1.100.000 Btu/hr of hot water for space heating.

Annual Energy profit $275.000

FACTORY

The Ethicon facility in Cornelia, Georgia - a Johnson & Johnson

Company- manufactures surgical and medical instruments. In

the process, Ethicon uses both heat and electrical energy on

a consistent 24X7X365 basis. The FlexEnergy Inc MT250 gas

turbine became an obvious choice as a consistent provider of

on site heat and electrical energy. They installed two MT250

gas turbines that deliver 2.200.000 Btu/hr as part of a modi-

fied exhaust system that feeds a steam boiler. The heat energy

generated by the gas turbines aids in the sterilization process

by reducing the amount of natural gas that the existing steam

boilers consume for regular operation.

Results: Boiler Savings: $ 150.000/year

Annual Energy Savings: $ 350.000/year

HOSPITAL

The John Muir Medical Center’s Walnut Creek campus is an

acute-care 324 bed facility that in 2007 began construction for

a Central Utility Plant expansion with a plan to increase energy

efficiency and reduce grid-purchased power. A feasibility study

was conducted to predict the facilities’ power and hot water

usage, then selected the technology that generates reliable out-

put to best fit the defined profile.

3 Flex Turbine MT250 configuration for a total of 750kW/hr won

the bid. To help fix cost and maximize uptime, hospital agreed to

a Total Care Service Agreement with FlexEnergy Inc for its low

maintenance gas turbine system.

Results: Boiler Savings: $ 200.000/year

Annual Energy Savings: $ 350.000/year

LABORATORY / OFFICE BUILDING

EMERYSTATION, EMERYVILLE, CA

Laboratory / office building

Wareham Development, a forward-looking real estate firl

based in San Francisco Bay Area, were seeking to offer their

tenants the unique benefit of low cost energy. Distributed

generation was chosen to produce the desired result. It limits

cost exposure to future rate increases and the thermal energy

generated from combustion can be used for space or process

heating for the EmeryStation facilities.

By installing 3 250kW Flex Turbine MT250s Wareham

Development benefits from secure power energy savings and

reduced energy cost volatility. The tenants benefit from ultra-

clean onsite, reliable power and an installation that is unobtru-

sive. All 3 units are natural gas fired.

Results: Annual Emissions: $ 200.000/year

Annual Energy Savings: $ 50.000 to 60.000/year in energy



Landfill gas to energy

Toland Road Landfill Ventura county CA

Ventura Regional Sanitation District wanted to take advantage

of all the landfill gas as it became available rather than waiting

5-10 years for the optimal flow required for a large scale

reciprocating engine. With installation of the FlexTurbine

system, Ventura County affirms its’ commitment to renewable

energy and environmental stewardship. The partnership with

Flex Energy will continue to pay dividents in future years as the

9 commissioned 250kW MT250 turbines will increase to 15 to

meet the full capacity of Toland Road Landfill.

Results: Annual Emissions: CARB certified for operation on

landfill.

Annual Energy Savings: $ 1.9MM/year in energy savings.

Renewable Portfolio Standard: 2,25 MW towards California’s

overall renewable energy goals.

What is the Flex Powerstation™ FP250?

The Flex Powerstation™ FP250 is simply the cleanest, most versatile pollution control and power generation solution in the world. The revo-lutionary Flex Powerstation FP250 oxidizes fuel gases, especially previously unusable fuel gases, to produce clean, green electricity.

The Flex Powerstation FP250 significantly expands the range of fuels that can be used to generate power. Unlike other current power plants that are available, the system operates cleanly and efficiently with a wide range of fuels, including landfill gas as low as 5% methane (50 Btu/scf). It is also atypical in that it accepts fuel gas near atmospheric pressure, so a gas compressor is not needed and it needs minimal fuel conditioning.

For landfills, why not just use a flare to destroy the methane?

A flare certainly destroys the methane, but cre-ates combustion-related pollution and provides no beneficial use. The Flex Powerstation™ FP250 destroys methane, has virtually zero emissions and generates electricity which creates revenue or savings to pay for the pollution clean-up and methane destruction.

What range of methane gas can the Flex Powerstation™ FP250 run on?

Unlike current market solutions, the Flex Power-station FP250 can operate on waste gases like methane in concentrations from 100% down to 5% methane.

How much power can a Flex Powerstation™ FP250 generate?

The Flex Powerstation generates 250 kW per system.

Is the Flex Powerstation™ FP250 scale-able?

Absolutely. The Flex’s modular design enables easy scaling based on the specific requirements of the site.

How much NOx (Nitrogen Oxide) emissions does the Flex Powerstation™ FP250 generate?

Less than 1 part per million (ppm).

How much CO (Carbon Monoxide) emissions does the Flex Powerstation™ FP250 generate?

Less than 1 part per million (ppm).

Where can the Flex Powerstation™ FP250 be used?

The Flex Powerstation FP250 can be utilized in Landfills (open and closed), Coal Mines, Digesters, Oil & Gas Operations, Waste Water Treatment Plants, Industrial Processing Plants and Waste Fuel Sites (military bases/ships, etc.), to name a few. New applications for the Flex Powerstation FP250 are discovered every day.

Does the Flex Powerstation™ FP250 have a combustion process?

No.

Does the Flex Powerstation™ FP250 require fuel conditioning and clean-up?

Many less than conventional technologies.

What is LFGTE?

Landfill Gas to Energy, using a potent green-house gas pollutant and waste product to create electricity.

How destructive is Methane gas for the environment?

According to the EPA, methane gas is 20-25 times more potent to the atmosphere than the green-house gas CO2.

How long does Landfill produce methane?

A landfill continues to emit methane gas for up to 100 years

Frequently Asked Questions _ FP250



What is the Flex Turbine™ MT250?

Gas turbine-powered generators represent the cleanest combustion technology available today. And the FlexEnergy Inc Flex Turbine™ MT250 leads the way with its on-site, clean, low emissions technology… the very best way to consume less and generate more. At the heart of this extra-ordinary equipment is a simple, powerful single-shaft design sharing a heritage with the legendary Dresser-Rand KG2 two-megawatt gas turbine that has proven to be one of the most reliable in its class. With typical FlexEnergy ruggedness and reliability, the 250 kW turbine has a product design life of 80,000 hours.

What types of methane gas can the Flex Turbine™ MT250 run on?

The FlexEnergy, 250 kW Flex Turbine™ can use pipeline natural gas and renewable “waste” fuels with a wide range of energy content, including landfill gases, digester gases, gases recovered from oil and gas processes and even gases that include significant hydrogen content.

Where can the Flex Turbine™ MT250 be used?

The Flex Turbine™ MT250 can be deployed at facilities such as Landfills, Wastewater treatment plants, Food processing facilities, Breweries, Agricultural waste handling facilities and Oil and Gas recovery facilities.

How much power can a Flex Turbine™ MT250 generate?

The Flex Turbine™ MT250 generates 250 kW per system.

What types of electrical generation can the Flex Turbine™ MT250 provide?

Grid parallel, dual-mode, or grid-isolated.

Is the Flex Turbine™ MT250 scale-able?

Definitely. The MT250’s modular design enables

easy scaling based on the specific requirements of the site.

How much NOx (Nitrogen Oxide) emissions does the Flex Turbine™ MT250 generate?

Less than 5 parts per million (ppm) @ 15% O2 at 100%* load (*natural pipeline gas only).

How much CO (Carbon Monoxide) emissions does the Flex Turbine™ MT250 generate?

Less than 5 parts per million (ppm) @ 15% O2 at 100%* load (*natural pipeline gas only).

Where can the Flex Turbine™ MT250 be used?

The Flex Turbine™ MT250 can be utilized in Landfills (open and closed), Coal Mines, Digesters, Oil & Gas Operations, Waste Water Treatment Plants, Industrial Processing Plants and Oil and Gas recovery facilities, to name a few.

Does the Flex Turbine™ MT250 feature inte-grated heat recovery?

Yes, the Flex Turbine™ MT250 offers built-in heat recovery integration with controllable output le-vels, the ability to reduce overall footprint, no need for ducting and is suitable for potable applications.

Is the Flex Turbine™ MT250 recuperator unique?

Yes, the Flex Turbine™ MT250 has a patented recuperator that is critical to high efficiency and is considered the best in the industry.

Is the Flex Turbine™ MT250 combustor unique?

Yes, the Flex Turbine™ MT250 has a patented combustor that generates dry low NOx and easily meets stringent environmental regulations.

Frequently asked questions _ MT 250

26

SOUTHERN EUROPEWASTEENERGY S.A.

VAT No: EL997535982Gerakari str. 7

GR-45 332 IoanninaHELLAS

Tel.: +30 2651 303 753Fax : +30 2651 306 109

email: [email protected]

MIDDLE EASTMavrogenous str. 13

Lofos AksiomatikonPeristeri 121 36 Attiki

HELLASTel.: +30 6972 85 66 22

SCANDINAVIAP. O. Box 2037

132 02 Saltsjö-BooSWEDEN

INTERNATIONALP. O. Box 3

2650 AA Berkel en RodenrijsThe NETHERLANDS

www.wasteenergy.gr

www.wasteenergy.gr

copy

right

SCI

N A

B &

SBD

AB ©

3320

1

Documents

THE CLEANEST ENERGY SOLUTIONS - WasteEnergywasteenergy.gr/brochures/WasteEnergy-Green_Energy_Solution.pdf · The technology The FlexEnergy Group with its tech-nology orianted background