The cork board tutorialBy: Krystle Lincoln

Step 1 first you open up adobe photoshop. Then you get a Cork board of what ever you

want from the internet. When you find a cork board you right click

on the picture and click save picture as and save it in any file you want just remember where you saved it at.

Step 2 Go on your adobe photoshop and click on

file on your menu at the top Click on open and then you find the cork

board where ever you saved it at. then click on the picture and press open.

that will put it on your Photoshop.

Step 3 You go on image on you menu on top and

click on image size. On your document size put 30 inches on the

width and then click OK. The picture may be huge but you come make it

zoom out by pressing the ctrl and - key. Press it a few times to zoom out so you can see

it all and if you want to zoom in then you press the ctrl key and +key.

Step 4Now you can put pictures on your cork

board. first you have to have pictures in your photo file. you can upload pictures to your photo files or you can get pictures from the internet.

You open them by going to your file in your menu at the top and click on open and open any picture you want.

Step 5Your picture will open up onto a new tap for the

picture you have picked.On your picture you want to capture that picture and

put it on the cork board.You select the picture by pressing the ctrl-a keys. That

will select the whole picture with the marching ants.If you want to crop it and want a certain part of the

picture you click on the Rectangular Marquee tool (m) and click on the corners you wanted to crop.

Last you click on the Move Tool (V) and click on the picture and move it to the cork board tap at the top and drop it on the board where ever you want it to be.

Step 6If the picture is to big or if you want to tilt it

a little pit you press the ctrl-tThat will select the picture and you can also

move it and change the size and press enter.If you already have the picture on your cork

board you can exit the picture on the other tap.

Step 7If you want a thumbtack on your board to

hold your pictures up you can go online and search for a good thumbtack of what ever you want and save it on your picture file or were ever you will remember where you saved it at.

Then open it on to a new tap on adobe.

Step 8On the thumbtack picture you want to grab it by

using the Rectangular Marquee tool (M).Then you click on the corner of the thumbtack and

to the other end of the corner just like cropping the picture. That will have the marching ants of where you selected it.

Then you click on the Move tool (v) on your tool menu.

Then click on the thumbtack picture and drag it to the cork board tap above and drop it on the board.

Step 9To get rid of the back ground of the thumbtack

you click on your Magic Wand Tool (w).Then you click on the back ground of the

thumbtack and press delete on you key board.Then press ctrl-d so the marching ants will go

away.To erase the left over’s on the picture you

click your eraser tool (e) and erase them.

Step 10Then you click on the Move tool (v) and click

on the thumbtack and move it on top of the your picture to hold it up.

If you want more thumbtacks then you click on the thumbtack layer on the expand panels and press ctrl-j on your key board. That will copy the thumbtack picture.

If you want to rotate andChang the size of yourThumbtack then pressCtrl-t. and if your done Then press ctrl-d to get ridOf your marching ants line.

The EndThat is how you add pictures you a cork

board.You can put more pictures if you want to and

do the same steps.This is my cork board that I finished.