Upload
others
View
10
Download
0
Embed Size (px)
Citation preview
Deployable High Pressure Nitrogen Cylinder Filling
Designed & Manufactured by South-Tek Systems, the Leader in Nitrogen Generation Technology
3700 U.S. Highway 421 N • Wilmington, North Carolina 28401 • 888 526 6284www.southteksystems.com [email protected]
Generate Nitrogenfrom Thin Air! ®
MILITARY APPLICATIONS:• N2 filling of tires and struts• High pressure N2 gas suspension recoil systems• N2 backpack systems (NBK and similar)• Missile seeker head• Fire suppression refill• Cylinder fill for backup N2 supplies• Any other low or high pressure N2 uses
The HPC-1D deployable nitrogen generator is designed to provide high-pressure nitrogen on demand for a wide range of military applications in field conditions. It is portable, reliable, self-contained, and uses mobile or line power sources. It can be used at field sites, on flight-lines, and in mobile or fixed shops. The system fills any N2 gas cylinders, including standard and smaller portable backpack bottles, at pressures up to 3500 psi. It can be transported on board aircraft, ships and ground vehicles, and
set up and running in minutes. With the HPC-1D your nitrogen supply goes wherever you go!
ELECTRICAL: Hubbell 240V wall mount receptacle male-to-female spare extension cord 240V - 30’ power cord (no plug)
MAINTENANCE: Booster Maintenance Kit (500 hours) Nitrogen Generator Maintenance Kit (1,000 hours)
SPARE PARTS: Spare Fittings Kit, Spare Tubing Kit, and Systems Repair Kit available with system
AVAILABLE OPTIONS: For pricing contact your distributor, or [email protected]
NSN: 3655-01-689-3080 / Part Number: HPCD-01D-DA
08/2020
FEATURES:• Heavy duty weather-proof case with gasket
seal on cover; NEMA type protective fan to shield from water
• Fully integrated, self-contained system, with twin oil free air compressors, heavy-duty N2 membrane separator, low pressure N2 tank, and two stage direct drive booster
• Fully operable with case closed for protection
• Auto shutoff, inlet/outlet gauges, hour meter
• 9” diameter, high tread rubber wheels with extended handles on opposite end for effortless transport across all terrain types
• Fold out, pin lock, wheel assembly – easily folds out of the way when ready to lift and transport
• Topside control panel with slanted mounting
• External single bottle rack & strap mounted on back of case
• Easy removal design of major components for maintenance access
• Top side compartments for storage
* Partially filled cylinders will fill to max pressure in fewer hours. Rate is stated at 220v/60hz; fill rate at 50Hz is approximately 18% longer.
PremiumQualityNitrogen ―On-Demand!
N2GENHPC-1D
Distributed by:
Minimum nitrogen purity 99%
N2 outlet pressure 2200 psig or 3500 psig
Fill rate Standard 2200 psig cylinder* Approximately 245 cubic feet in 6 hours
Fill rate Standard 3500 psig cylinder* Approximately 330 cubic feet in 9 hours
Fill rate “backpack” 3500 psig cylinder* Approximately 65 cubic feet in 100 minutes
Electrical requirements 220-240v / 50-60Hz / 1ph — Hubbell or GenSet connection
Standard Connection Hubbell plug standard, other plug types optional
Power rating 25 Amps
Cylinder fill push to connect hoses 7’ high pressure fill lines with CGA 580 and 680 fittings
Dimensions (case closed) 55” length x 40” width x 33” height
Weight 450 lbs.
NSN / Part number 3655-01-689-3080 / HPCD-01D-DA
SPECIFICATIONS: N2GEN HPC-1D
Technology as dependable as the men and women using it.