1
6-1/8" 10-7/8" 6-3/4" 2 1/4" 12 1/2 " 5-1/4" 5-1/2" 3-5/8" 9-1/4" NOTE: Max counter thickness is 3". Water Supply Inlet Tube Flexible Outlet Tube Flexible Vent Tube 1/4" Incoming Water Supply Our finest line of instant hot water dispensers for use with our Hot Water Tank for filtered near-boiling 200°F and cool drinking water Tank with filter sold separately (HWT-F1000S) The Next Necessity Submittal Sheet Job Specifications Specifications Instant Hot Water Dispensers Printed in USA HWD475-16C-83-10 Dimensions Hot & Cool – Dispenses near-boiling 200°F water and cool drinking water • Unique single handle design for hot and cool water provides a sleek, minimalist look • Hot side activation with automatic shut off • Stay-On feature allows the faucet to remain open for easy dispensing of cool water • Activate the faucet handle by first pressing down and then pushing backward for hot or pulling forward for cool • Ceramic valve resists corrosion • Durable all brass faucet construction 5-Year In-Home Limited Warranty* • For use with InSinkErator Hot Water Tank and F-1000S Filtration System Available in these designer finishes: chrome and satin nickel • Unit not for commercial/industrial use Sample Specification Instant hot water dispenser(s) shall be InSinkErator Model F-HC3300 with 2/3-gallon hot water tank, adjustable temperature from 160°F to 210°F and instant, self-closing ceramic hot valve. Warranty: 5-year parts and in-home service. * The complete InSinkErator warranty is included in the Care & Use booklet packed with each unit. Ceramic Valve Shipping Weight Instant, self-closing Required Hole Diameter Approximately 1 -3/8" – 1 -1/2" standard sink hole 5.0 lbs. Minimum 2-1/2" required from sink hole center to backsplash F-HC3300 1-800-558-5700 USA www.insinkerator.com The Emerson logo is a trademark and a service mark of Emerson Electric Co. InSinkErator may make improvements and/or changes in the specifications at any time, in its sole discretion, without notice or obligation and further reserves the right to change or discontinue models. © 2016 InSinkErator, InSinkErator ® is a business unit of Emerson Electric Co. All Rights Reserved. 1-800-558-5700 Canada www.insinkerator.ca Complies with California Lead Plumbing Law Certified to NSF/ANSI 372 0.25% lead We Come To You ®

The Next Necessity · Instant Hot Water Dispensers HWD475-16C-83-10 Printed in USA Dimensions • Hot & Cool – Dispenses near-boiling 200°F water and cool drinking water • Unique

  • Upload
    others

  • View
    2

  • Download
    0

Embed Size (px)

Citation preview

Page 1: The Next Necessity · Instant Hot Water Dispensers HWD475-16C-83-10 Printed in USA Dimensions • Hot & Cool – Dispenses near-boiling 200°F water and cool drinking water • Unique

6-1/8"

10-7/8"

6-3/4"

2 1/4"

12 1/2"

5-1/4"

5-1/2"

3-5/8"

9-1/4"

NOTE: Max counter thickness is 3".

Water Supply

Inlet TubeFlexibleOutlet TubeFlexible Vent Tube1/4" IncomingWater Supply

Our finest line of instant hot water dispensers for use with our Hot Water Tank for filtered near-boiling 200°F and cool drinking waterTank with filter sold separately (HWT-F1000S)

The Next Necessity™

Submittal Sheet

Job Specifications

Specifications

Instant Hot Water Dispensers

Printed in USAHWD475-16C-83-10

Dimensions

• Hot & Cool – Dispenses near-boiling 200°F water and cool drinking water

• Unique single handle design for hot and cool water provides a sleek, minimalist look

• Hot side activation with automatic shut off

• Stay-On™ feature allows the faucet to remain open for easy dispensing of cool water

• Activate the faucet handle by first pressing down and then pushing backward for hot or pulling forward for cool

• Ceramic valve resists corrosion

• Durable all brass faucet construction

• 5-Year In-Home Limited Warranty*

• For use with InSinkErator Hot Water Tank and F-1000S Filtration System

• Available in these designer finishes: chrome and satin nickel

• Unit not for commercial/industrial use

Sample SpecificationInstant hot water dispenser(s) shall be InSinkErator Model F-HC3300 with 2/3-gallon hot water tank, adjustable temperature from 160°F to 210°F and instant, self-closing ceramic hot valve.

Warranty:5-year parts and in-home service.

* The complete InSinkErator warranty is included in the Care & Use booklet packed with each unit.

Ceramic Valve

Shipping Weight

Instant, self-closing

RequiredHole Diameter

Approximately

1 -3/8" – 1 -1/2"standard sink hole

5.0 lbs.

Minimum 2-1/2" requiredfrom sink hole centerto backsplash

F-HC3300

1-800-558-5700USA

www.insinkerator.com The Emerson logo is a trademark and a service mark of Emerson Electric Co.

InSinkErator may make improvements and/or changes in the specifications at any time, in its sole discretion, without notice or obligation and further reserves the

right to change or discontinue models.

© 2016 InSinkErator, InSinkErator® is a business unit of Emerson Electric Co. All Rights Reserved.

1-800-558-5700Canada

www.insinkerator.ca

Complies with California Lead Plumbing Law

Certified toNSF/ANSI 372≤ 0.25% lead

We Come To You®