Upload
trinity-mccabe
View
223
Download
4
Tags:
Embed Size (px)
Citation preview
THE PLANAR DEFLECTRON
Geoffrey H. Grayer BSc PhD
A micro-engineered amplifier and logic device.
Contents
Introduction - what is planar deflectron? Principles of operation; Switch and Amplifier Evolution Planar Construction and Fabrication Unique special features IPR position Seed funding objectives Summary
Introduction
The Deflectron idea is being developed at the Rutherford Appleton Laboratory by a collaboration between the Detector Group of the Instrumentation Department and the Central Microstructure Facility.
I was the instigator of the idea, but it is of course a team effort, with particular thanks to Bob Stevens, Zheng Cui and Ejaz Huq.
What it is - A vacuum device (like a sub-
miniature tube/valve) which acts as an amplifier or logic element
It uses field emission instead of a heated cathode
It deflects the electron path rather than trying to modulate the current (like a television tube)= Deflectron
It is constructed in one plane for simplicity and connectivity= Planar
Principle of Operation Extractor produces high electric
field on cathode Hence cathode emits electrons
according to the Field Effect A triplet of focus electrodes alter
final spot size Signal applied to deflection plates
move beam Split anode collects electrons Conventional construction would
work from the tip up, using cylindrical symmetry
Model by Z. Cui showing electron tracks for one set of parameters.
How it evolved
A scanning electron microscope picture of a conventional 2- gate field emitter. This represents “state of the art” (photo CLRC)
For at least 20 years people have been trying to realise a field-effect amplifier
Usually an attempt has been made to produce the analogy of a triode vacuum tube with a 3-D cylindrical shape (see fig)
They have not worked because the potential of electrons produced by a field emitter is typically x100 that of a thermionic emitter, reducing gain by that amount. Hence typical valve stage gain 30 becomes 0.3 !
The Noise Issue The variation in emission current is typically 10% from a
field emitter. This is noise superposed on the signal, and would make any amplifying application untenable
My solution to this is to create 100% feedback by adding a suitable resistor in the cathode circuit (R=dVg/dIa)
Having fixed the current one cannot amplitude modulate the electron beam. The solution is to deflect it - hence the name Deflectron!
Conventional 3D Cylindrical Construction
3D device fab would be extremely complex, requiring many processes to build up the structure
This gets even more difficult when the focus and deflection electrodes are added, breaking cylindrical symmetry.
When anodes added on top, closed volume is almost impossible to evacuate.
They are difficult to connect with electrodes all at different levels
A scanning electron microscope picture of a conventional 2- gate field emitter. This represents “state of the art” (CLRC device)
Planar Construction
To see how the planar device evolved, imagine a slice taken through the middle of the cylindrical device.
Construction is then simple lithography of metal, plus the tip fabrication.
Simplified layout
of Deflectron
Fabrication issues Single layer device -planar Critical process is production of
pointed cathode emitter in plane Principle yield defining step: Direct EBL defines point in plane Plasma etch defines point at right
angles to plane All other fabrication processes are
‘conventional’ VLSI patterning in refractory metal
Schematic Diagram
A1, A2: anodes D1, D2: deflector F1: focus H F2: focus V F3:focus H E: extractor K: field emitting
cathode
Characteristics of Planar Deflectron Can work as amplifier or logic element Amplifier has gain/dynamic range trade-off, set by
voltage parameters Small size means very fast (fo = 1~10GHz) Complementary signals in/out with high common mode
rejection - benefit is external noise/spike rejection Coupling can be DC as only reacts to voltage
difference benefit - broadband operation to10GHz Power consumption very low and independent of
speed or state Simple few-step fabrication
The Deflectron as Logic Element Focused to a spot, the current
rapidly changes from one anode to another, producing the ideal binary switch
These switches may be connected in series to carry out the usual Boolean logic functions
A tri-state device may be produced by introducing a third central anode which is connected straight to +V. Thus devices can be multiplexed to the same bus.
Tri-state device
Deflectron as Logic Switch
0
1
2
3
4
5
6
-10 -5 0 5 10
Deflecting Potential
An
od
e C
urr
en
t
The Deflectron as Amplifier
Defocused at the anode, the current varies slowly as the beam is deflected, resulting in a analogue amplifier
By varying the spot size, gain is traded against dynamic range, according to application
Deflectron as Amplifier
0
1
2
3
4
5
6
-20 -10 0 10 20
Deflector Volts
Gain of the Deflectron
The Gain of the Deflectron depends on: ~ 1/ extractor voltage (“stiffness”) ~ integrated deflecting E-field:
~ Length of deflector plates ~ 1/ Spacing of deflector plates
~ drift length (“lever arm”) ~ spot size (adjustable by focus)(In principle, there is no limit on the drift
length.)
Unique Special FeaturesThis is not expected to replace the ubiquitous
transistor, but to go where no transistor dares! It will work at very high temperatures - eg
NASA Venus lander ? (max. is melting point!) It will work at temperatures approaching
absolute zero - eg quantum microdot readout
(This could be important commercially) It will work in very high radioactivity - eg
particle physics experiments, nuclear industry It has high noise rejection because of
complimentary in/out signals
IPR: The idea of deflecting electrons is not new
It looks like a miniature electrostatic CRT, with the screen replaced by anodes
Deflection - modulated electronic tubes (valves) were made and patented by RCA in the 1960s. Their high dynamic range made them excellent mixers.
Its use as a vacuum micro-electronics device for generating microwaves has been suggested
However, this particular application and the planar construction are novel
IPR position No filings submitted to-date Public disclosure in scientific publication:
Technical Digest, 10th International Vacuum Microelectronics Conference, August 17-21,1997, Kyongju, S. Korea, p.206, G.H.Grayer, S.E.Huq, Z.Cui, P.D.Prewett
If go-ahead, need urgent review of What may be protected Search of existing IPR in the field
Seed funding objectives
Identify & complete PCT patent applications to secure IPR of embodiment & fabrication processes
Define & characterise pointed cathode process Demonstrate field emission from pointed cathode +
incorporation in planar device structure Production of planar deflectron demonstrator Characterisation of complete fab process steps Electrical characterisation of proof-of-principle
demonstrator
Seed funding required to produce proof-of-principle demonstrator
Estimated £70k
Summary The Deflectron is:
A very wide band amplifier or switch (0 to many GHz) Capable of operating over extremes of temperature
(cryogenic to high temperatures) Extremely radiation hard Extremely resistant to EMI Very rugged Simple and hence cheap to construct (= high yield) Could be realised with a relatively low capital
investment