THE POWDER KEG - Temple Gun Club · 3/11/2016 · Temple Gun Club, Inc. P.O.Box 2027, Temple, TX 76503 December 21, 2015 [email protected] 3 ATF Rule 41P/41F By now, many of

Temple Gun Club, Inc. P.O.Box 2027, Temple, TX 76503 February 20th, 2016

March Meeting Monday, March 7th at 7:30 PM. The program for the meeting will be a talk with John Fisher, County Commissioner.

Damage to Range Property Recently almost all of the barrels in the two front bays belonging to the club for use during action pistol events were damaged by someone shooting them with buckshot. Everyone attending range orientation was made aware that range property other than actual shooting stands ARE NOT to be used as targets. Only paper and cardboard targets are allowed. As one Board member stated, our range is not a “West Texas caliche pit”. Please leave your trash at home, do not trash our range, and obey range rules for the sake of all club members. If you bring guests to the range, please be responsible for their conduct and safety.

Officers Dick Dwinell

President

Zeb Pomerenke Vice President

David Rowe

Secretary/Treasurer

Jesse Robinson RECORDING SECRETARY

Board of Directors Wayne Cole 254-721-3786

Ken Gaby 254-780-2025

Jesse Robinson 254-939-5944

David Rowe 254-931-1770

Dick Dwinell 254-698-3741

Zeb Pomerenke 254-366-3170

Jason Armstrong 254-534-0739

Kurt Glass 254-939-7018

Bryan Casinger 254-931-8181

Membership Zeb Pomerenke [email protected] Editor Bryan Casinger [email protected]

THE POWDER KEG

Temple Gun Club, Inc. P.O.Box 2027, Temple, TX 76503 February 20th, 2016

From The President

Monthly Membership: Membership in the Temple Gun Club is open on a monthly basis. Dues will be prorated through August 1st, our normal membership renewal date. Based on the current dues rate the monthly dues to next August are: The initiation fee remains at $25 and NRA membership is required and available. Applications will be accepted from 6:45 pm to 7:15 pm immediately before each monthly meeting. Contact your friends and acquaintances who are responsible gun owners about joining our club and bring or send them early to the meetings. We would like to solicit from the membership three more individuals to form a “membership team” to process the new member applications before each meeting. We’ll use two members at each meeting so the requirement would only be every other month. If you would like serve on that team please contact me at 254-698-0085 or [email protected]. Thanks to Don Wyatt for stepping forward as the first for the team of four! November $100 February $70 May $40 December $90 March $60 June $30 January $80 April $50 July $20

Programs We are continuing to build a series of interesting and educational programs for our club. We would like very much to touch upon your area of interest and you can help us do that by submitting your ideas and suggestions. Please submit them to myself at [email protected] or [email protected]. Future programs are as follows:

• March – John Fisher County Commissioner. • April - Rolly Correa – Retired Game Warden, Salado Constable, and pheasant

hunter extraordinaire. • May – looking for someone. Ideas please or better yet name and phone number.

Voting 2016 is a very important election year for gun owners. If you are not registered to vote, please do so. If you are and when you are, study the candidates to insure you vote for one who is pro Second Amendment vs one who would choose to control your purchase or ownership of firearms. If you are not sure where the candidate stands, I’ve found that you can always look at the planks in the party platform for information on any issue. Smart candidates will not always tell you where they stand on key issues. But the party they are associated with will give you a good indication.

God Bless

Dick

Temple Gun Club, Inc. P.O.Box 2027, Temple, TX 76503 December 21, 2015

[email protected] www.templegunclub.com 3

ATF Rule 41P/41F By now, many of you have heard about recent changes to National Firearms Act (NFA) rules that affect transfers or manufacture of suppressors or other NFA firearms. These potential rule changes have been pending since 2013 and were published for public comment and known as “41P”. After reviewing over 9,500 comments on the proposed (“P”) rule change, the final version was published in the Federal Register as “ATF 41F” on January 15, 2016, and the rules take effect 180 days from then (July 13). For now, all forms (transfers on Form 4 or “make and register” on Form 1, for example) will be processed under the current rules as long as they are postmarked prior to July 13th. In addition, you can still submit a Form 1 as a trust or corporation via eForms until that date. I’ll provide what information I can about the impact of this rule change, but you should be aware that some of the wording in the rules is a bit vague and not all implementation details have been worked out. First, the plus side of the new rules is that Chief Law Enforcement Officer (CLEO) approval is no longer needed for individuals wanting to own NFA items. This prevented people in less gun-friendly jurisdictions from owning these items and is no longer a de facto method of preventing otherwise lawful purchases. However, there will be a requirement to notify the CLEO of the planned transfer (or making) by both individuals and entities (including trusts). So this does increase the paperwork burden for those using trusts. In addition, there will also be a requirement for all “responsible” members of the trust (or corporation) to submit a Form 5320.23 (not yet published) along with passport photos and fingerprint cards. There is conflicting information available right now about the requirement to resubmit these documents with every transfer, or whether they will be good for two years from data of submission for all transfers. There is also discussion as to who is a “responsible person,” but right now it seem to be the Settlor(s) and Trustee(s), not Beneficiaries or Successor Trustees. Stay tuned as the situation develops. The challenge will be getting the FD-258 (FBI Fingerprint Card). Most of the Law Enforcement Agencies around here use the Live Scan (Morpho Trust) system and “rolling” fingerprints on cards is becoming a lost art according to Chief Deputy Chuck Cox from the Bell County Sheriff’s Department. However, I called Morpho and confirmed that “some” of their locations can scan your prints and then print out the FD-258 (2 copies for $10). The second major area of change is a section of regulations to clarify possession and transfer of NFA items in the estate of a deceased owner (individual or last Trustee in a Trust). In either case, the new rule clarifies that possession is allowed without a transfer during probate (if needed) and transfer to beneficiaries of the estate shall be done tax free. If there are no beneficiaries, or if they choose to sell the NFA property, then the transfer will be done using a Form 4 with the tax paid by the transferee. For anyone wanting to read ATF Rule 41F as published, it can be found at the website below (the actual verbiage of the new rules is on the last 3 pages): https://www.gpo.gov/fdsys/pkg/FR-2016-01-15/pdf/2016-00192.pdf I’d be more than happy to answer questions to the best of my ability, but understand that it will likely take a year or two for the “bugs” to be worked out. In the meantime, I’d also encourage you to check out blog posts and information from industry sources such as the Silencer Shop, NFA Freedom Alliance, or any of the several NFA lawyer’s websites. You can reach me at [email protected] or 254.718.1013. Greg Oermann





FOR SALE

Two stackable cabinets filled with stuff. RCBS reloading dies for pistols: .45, 44, 9mm. Rifles: M1 carb, 5.56mm, 7.62mm & 30-06. No boxes but all contents are in the drawers. Everything needed to process casings. There are hundreds of primers, pistol and rifle, lg and small. 5.56mm jacketed bullets, 9mm, 30 cal. About 100 new casing for M-1 carbine. Old RCBS press and Lee hand loaders, trimmers, scale, shell holders, reloading reference and a tumbler. All have been stored in the house so extreme temps. Will take best offer above $400.00. Email: [email protected]. Thanks.

For Sale

You know we lost of one of club members and past Board of Director Larry Springer. His wife, Marilyn, is now trying to sell some of Larry’s reloading equipment. If you are interested in any of the items below you can contact Marilyn or their son Larry Jr to make arrangements for pickup. Located just South of Academy on Hwy 95. Their phone number is 254-982-4924. Larry and I were shooting together when he bought most of this equipment and I can attest that a lot of the dies and extras are new and have never been used. The loaders have been cared for meticulously and like new. The two loaders up for sale are two Dillon 650 and they are decked out. These come as is but are backed by Dillon’s “No BS” lifetime warranty. Price new Dillon 650 set up 9mm 45acp 566 OPTIONS Dillon Carbide Dies X X 65 Casefeeder w/plate X X 220 Powder check X X 69 Low powder sensor - X 42 Strong Mounts X X 49 Aluminum Roller Handles

X X 46

Toolholder w/ wrench Set

X X 30

Competition Seating die

X - 92

2 small/2 large primer pickup tubes

X X

Total new 1137 1087 ASKING PRICE

$965 $925



Price new ASKING PRICE

2x Powder Measures (price is for one) 77 75 Complete toolhead – 9mm Carbide dies 93 80 Complete toolhead – 40sw Carbide dies 93 80 Small Rifle plate for Casefeeder (new) 39 35 Large Rifle plate for Casefeeder (new) 39 35 4x 650 toolheads new in package (each) 28 25 8x powder dies (also used with Powder check) (each) 11 10 Set of Dillon ball end allen wrenches - 5 Dillon 357 mag case gauge (new) 15 15 VHS tape- Dillon 650 instructional video - 5 Dillon Primer Swager 100 85 Small primer conversion kit for Dillon 550 - 10 Maintenance Kit 40 30 Spare primer pickup tubes (each) 8 5 Dies Price new ASKING

PRICE 2 sets - 38/357 Dillon Carbide Dies 65 65 40s&w Dillon Carbide 65 65 Caliber Conversion kits-

Price new ASKING PRICE

2 x 10mm/40SW (each) 78 65 222/223 78 65 38/357 78 65 Miscellaneous Price new ASKING

PRICE Magma Engineering Co- Case Master Jr – Arbor Press Model 6805-1005 (www.magmaengr.com) -used for full case resizing Drop tubes in 9/40/45

338.00 24.50

300

3x – Lyman Case tumblers (each) 100+ 80 Large Dillon Media Separator 76 50 CASTING Price new ASKING

PRICE Star sizer with warmer Sizer w/o die warmer Swivel handle NOT ALL pieces Included

338 110 35.50

BRASS ASKING

PRICE 2000 – 9mm once fired 150



2000 – 40sw once fired 150 2000 – 45acp once fired 150

This is a partial list and we will be updating it once as we uncover more items. BENCH FOR SALE – $500 or make offer.



NOTE TO MEMBERS Be sure to keep us informed of your address and email address changes to ensure that we can keep you informed of club news and ensure that you

receive your renewal notices on time. Changes can be sent to [email protected]

Documents

THE POWDER KEG - Temple Gun Club · 3/11/2016 · Temple Gun Club, Inc. P.O.Box 2027, Temple, TX 76503 December 21, 2015 [email protected] 3 ATF Rule 41P/41F By now, many of