Thermo Scientific CO2 Incubators

Advanced CO2 incubatorsfor clinical laboratories

02

Thermo Scientific CO2 Incubators Offer A Range For All YourClinical Applications!

• Water jacket or direct heat temperature control• Unit capacities of 1.4, 5.3, 6.5 and 28-34 cu. ft.• High temperature decontamination models available• TC or IR CO2 sensors

Choice of Proven DesignsThermo Scientific CO2 incubators provide unsurpassed performance,reliability and selection with the proven experience of the worldwideleaders in CO2 incubation technology. Our enhanced and expanded lineof CO2 incubators incorporates advanced technologies and superiordesign to provide an ideal, stable culturing environment.

Thermo Scientific CO2 incubators are available in a variety of sizes tomatch your capacity requirements. Choose from water or direct heattemperature control technology; thermal conductivity (TC) or infrared (IR)sensor based CO2 regulation. Thermo Scientific CO2 incubators offer arange of solutions to meet your specific culturing requirements andpreferences.

Temperature Control: Water Jacket or Direct Heat?Whether you prefer the thermal stability of a waterjacket design; or the lightweight, low-maintenance andhigh-temperature contamination control of a directheat; Thermo Scientific CO2 incubators provide theideal environment for your culture.

CO2 Control: Thermal Conductivity or Infrared?Thermo Scientific CO2 Incubators are available withthermal conductivity (TC) or infrared (IR) sensors to suityour preference for precise automatic CO2 control.TC sensors provide accurate CO2 control in applicationswhere temperature and humidity values are consistent.IR sensors are recommended in applications wheretemperature and humidity are changed frequently.

Thermo Scientific CO2 Incubators

Thermo Scientific Midi 40 CO2 IncubatorSmall capacity for benchtop use

ORDERING INFORMATIONCAT. NO. DESCRIPTIONJ1756-78 Thermo Scientific Midi 40 CO2 Incubator, 1.4 cu. ft. capacity stainless steel chamber, w/ TC CO2 sensor, 120V, 60Hz

SHELVESShelf dimensions (w x d) inch 13.5 x 11.5Construction Stainless steel, perforatedSurface Area 1.08 sq. ft. (0.1 sq. m)Max. per Chamber 4.32 sq. ft. (0.40 sq. m)Standard 4CONSTRUCTIONInterior Volume 1.4 cu. ft. (39.6 L)Interior Type 304, mirror finish, stainless steelExterior 18 gauge, cold-rolled steelELECTRICALRated Voltage 120V, 60Hz (Operating range 90-125V)Circuit Breaker/Power Switch 15 AmpPlug NEMA 5-15Alarm Contacts Power interruption; deviation of temp, CO2

DIMENSIONSExterior (w x h x d) inch/cm 18.5 x 18 x 23.5 (47 x 46.5 x 59.7)Interior (w x h x d) inch/cm 12 x 14 x 14 (30.5 x 46.5 x 35.5)WEIGHTNet 60 lbs. (28 kg)Shipping 70 lbs. (33 kg)

03

Solid outer doorcloses gently against thecabinet with a magneticgasket

Tempered glass inner dooris heated by outer door toprevent condensation

Non-porous silicon gasketmaintains chamber integrity

Four stainless steel shelves

Seamless, deep-drawnstainless steel interior witheasy-to-clean coved corners

Removable water reservoirfor relative humidity up to96% at 37°C

3-button mode controlfor simplified operation

Setpoint security

Scratch resistant highimpact painted finishfor easy cleaning

Radiant wall heatingprovides accurate uniformtemperature with naturalair convection

High visibility vacuumfluorescent displayfor at-a-glance monitoringfrom across the room

Reinforced cabinetpermits stacking

• Low maintenance direct heat incubator with 1.4 cu. ft. stainless steel chamber• IntrLogicTM II control system for safe, efficient operation• Easy-to-read digital display• Space saving for small quantities of cultures• Microprocessor-based automatic thermal conductivity CO2 control• Adjustable alarm and RS-485 signal output

TEMPERATUREControl ±0.1°CRange 5°C above ambient to 60°C (150°F)Uniformity ±0.4°C @ 37°C (98.6°F)Tracking Alarm User-programmable high/lowCO2

CO2 Control Better than ±0.1%CO2 Range 0-20%Inlet Pressure Required 15 PSIG (1.0 bar)CO2 Sensor TCReadability & Setability 0.1%Tracking Alarm User-programmable high/lowHUMIDITYRH Ambient to 95% @ 37°C (98.6°F)Humidity Source 1.5 gal standard, panFITTINGSAccess Port 1.3" (3.3 cm) with removable silicone plug with filterCO2 Inlet 1/4" hose (barbed)UNIT HEAT LOAD120V 200 BTU/Hr

THERMO SCIENTIFIC MIDI 40 CO2 INCUBATORTECHNICAL SPECIFICATIONS

04

• Internal volumes of 5.3 cu. ft.• Thermo Scientific iCAN touchscreen places totalcontrol and complete information at your fingertips

• 90°C moist heat decontamination function available fortotal contamination control, without removing sensors

• Choice of TC or IR CO2 control• Dual stack configurations on caster-mounted standsdouble useful capacity and save valuable lab space

• Features a unique pan-less humidity water reservoirwhich promotes faster humidity recovery

reduces handling and providesrecovery rates up to five timesfaster than ordinary tray humidifiedincubators, due to:• A surface area larger than ordinary

humidity water pans (provided bya water reservoir with inclined androunded corners)

• A patented floor heating systemthat operates after door opening

• Direct heat-transfer from heatedfloor to humidity reservoir

Patented humidity system for fasterrecovery ratesOur Heracell i series incorporatesa unique integral humidity waterreservoir that provides a high relativehumidity (rH) and allows rapidrecovery of optimal humidity levelafter door openings. A water levelsensor indicates when a refill isneeded – via a convenient prompton the touchscreen display – toavoid the desiccation of importantcultures. This pan-less system

Exclusive Thermo Scientific iCAN simplifiesoperation and enables rapid access of importantinformation for each critical parameter in theincubator. iCANTM provides trend analysis forconvenient evaluation of your unit's performance.

90°C moist heat decontamination forproven protectionThermo Scientific Heracell i CO2incubators are available with anon-demand, automatic 90°Cdecontamination function thatdecontaminates the entire chamber

interior without the need to removesensors, fittings and shelves.Independent laboratory tests havevalidated that 90°C moist heatdecontamination is highly effectiveagainst a wide range of contaminants,including mycoplasma.

Thermo Scientific Heracell 150i CO2 IncubatorsSurround your valuable cultures with an environment you can trust

TEMPERATURE

Control ±0.1°CRange 3°C above ambient to 55°C (131°F)*Uniformity ±0.3°C @ 37°C (98.6°F)Tracking Alarm User-programmable high/lowTEMPERATURE SAFETY

Sensor Independent thermostatController Independent analog electronicSetability 0.1%CO2

CO2 Control Better than ±0.1%CO2 Range 0-20%Inlet Pressure Required 15 PSIG (1.0 bar)CO2 Sensor TC or IRReadability & Setability 0.1%Tracking Alarm User-programmable lowHUMIDITY

RH Ambient to 95% @ 37°C (98.6°F)Humidity Source 3.2 qt. (3.0 L) pan-less reservoirFITTINGS

Access Port with Filter 1.1/4" (32 mm) with removable silicone plugCO2 Inlet 1/8" hose (barbed)UNIT HEAT LOAD

120V 273 BTU/Hr

ORDERING INFORMATION

CAT. NO. DESCRIPTION

J1805-25 Heracell 150i Direct Heat CO2 Incubator, 5.3 cu. ft. capacity stainless steel chamber, w/ TC CO2 sensor, 120V, 60Hz

J1805-27 Heracell 150i Direct Heat CO2 Incubator, 5.3 cu. ft. capacity stainless steel chamber, w/ IR CO2 sensor, 120V, 60Hz

J1805-26 Heracell 150i Direct Heat Dual Stack, 2 x 5.3 cu. ft. capacity stainless steel chambers, w/ TC CO2 sensor, 120V, 60Hzand mobile support stand

J1805-31 Roller base, support frame

J1805-32 Additional stainless steel shelf, full-width, 2 support rails

J1805-33 External Gas Guard

J1805-34 CO2 gas regulator, 2-stage

SHELVES

Dimensions (w x h) inch/cm 16.7 x 17.5 (42.3 x 44.5)Construction Stainless steel, perforatedSurface Area 2.03 sq. ft. (0.18 sq. m)Max. per Chamber 6.0 sq. ft. (0.54 sq. m)Standard, Maximum 3, 10CONSTRUCTION

Interior Volume 5.3 cu. ft. (150 L)Interior Type 304, mirror finish, stainless steelExterior 18 gauge, cold-rolled steel, powder coatedELECTRICAL

Rated Voltage 120V, 60HzCircuit Breaker/Power Switch 20 AmpsPlug NEMA 5-15Alarm Contacts Power interruption; deviation of temp, CO2

Data Outputs RS 232DIMENSIONS

Exterior (w x h x d) inch/cm 25 x 34 x 30.2 (63.7 x 86.7 x 76.6)Interior (w x h x d) inch/cm 18.5 x 23.9 x 20.9 (47 x 60.7 x 53)WEIGHT

Net 165 lbs (75 kg)Shipping 195 lbs (87 kg)

05

THERMO SCIENTIFIC HERACELL 150I CO2 INCUBATORSTECHNICAL SPECIFICATIONS

iCAN touchscreen improves your visibility and control of important incubatorinformation helping you to achieve your culturing goals• Door mounted for easy accessibility and viewing• Easy to use: convenient on-screen user prompts• Select from a variety of languages• Visibility to changes in culture environment: on screen logs and

usage recording• Monitor alarm alerts visually on the display

Thermo Scientific Water Jacket CO2 IncubatorsUnsurpassed thermal protection for your cultures

06

Class 100 HEPA Filtered Air ProtectionClass 100 HEPA airflow is thepreferred method of protectionof water jacket incubators. In-chamber HEPA air filtration systemcontinuously filters the entirechamber volume every minute,creating cleanroom Class 100conditions to preserve your asepticculturing environment. With airbornecontaminants from routine dooropenings the primary source ofcontamination in most cell culturelaboratory settings, the full timeprotection of the HEPA airflowsystem safeguards your culturesand minimizes downtime.

• Unique triple-wall construction protects against ambienttemperature fluctuations

• Large 6.5 cu. ft. corrosion resistant stainless steel chamber• Patented, heated dual-pane, inner-glass door minimizescondensation with improved responsiveness and fastertemperature recovery.

• Internal shelves are easily installed and removed withouttools for easy cleaning.

• Remote alarm contacts for connection to in-house alarmsystem

• Stacking kit included to create a dual stack configuration.• Choice of TC or IR sensor based CO2 control

Superior water jacket design forunexcelled securityThermo Scientific Water Jacket CO2incubators protect your cultures bysurrounding them with an insulatedtriple-wall cabinet construction anda jacket of temperature conditionedwater, providing unsurpassedprotection against unwanted heatloss, even in the event of a poweroutage!

Thermo Scientific water jacket CO2incubators feature a large 6.5 cu. ft.capacity, corrosion-resistant,stainless steel chamber. Ourincubators are the ideal choicefor laboratories concerned withsubjecting their cultures to potentialdisruption of power or significantambient temperature fluctuations.

Easy to clean• Polished stainless steel interior

with 100% coved corners is easyto clean, saves time and reducescontamination risk.

• Sturdy stainless steel shelves andsupports can be readily removedwithout tools for easy cleaning,autoclaving or adjustment.

• Patented inner-door gasket isremovable and cleanable, andadjusts continually to ensure atight seal.

• In-chamber HEPA filter snap-fits,making it easy to remove withouttools.

TEMPERATURE

Control ±0.1°CRange 5°C above ambient to 55°C (131°F)*Uniformity ±0.2°C @ 37°C (98.6°F)Tracking Alarm User-programmable high/lowTEMPERATURE SAFETY

Sensor Precision thermistorController Independent analog electronicSetability 0.1%CO2

CO2 Control Better than ±0.1%CO2 Range 0-20%Inlet Pressure Required 15 PSIG (1.0 bar)CO2 Sensor TC or IRReadability & Setability 0.1%Tracking Alarm User-programmable high/lowHUMIDITY

RH Ambient to 95% @ 37°C (98.6°F)Humidity Source 3.2 qt. (3.0 liters) standard, panFITTINGS

Fill Port 3/8" hose (barbed)Drain Port 1/4" hose (barbed)Access Port 1.3" (3.3 cm) with removable silicone plug with filterCO2 Inlet 1/4" hose (barbed)UNIT HEAT LOAD

120V 344 BTU/Hr

ORDERING INFORMATION

CAT. NO. DESCRIPTION

J1805-28 Thermo Scientific Water Jacket CO2 Incubator 3010, 6.5 cu. ft. capacity stainless steel chamber, w/ TC CO2 sensor, 120V, 60Hz

J1805-29 Thermo Scientific Water Jacket CO2 Incubator 3020, 6.5 cu. ft. capacity stainless steel chamber, w/ IR CO2 sensor, 120V, 60Hz

J1805-35 Roller base

J1805-47 HEPA filter airflow system, factory installed

J1805-36 Stainless steel shelf kit (includes shelf channels and shelf)

J1805-37 Stainless steel humidity pan (small)

J1805-38 Replacement HEPA & inline filter kit

J1805-39 Two stage CO2 regulator

J1805-40 External gas guard, 120V

SHELVES (CONTINUED)

Dimensions (w x h) inch/cm 18.5 x 18.5 (47 x 47)Construction Stainless steel, perforatedSurface Area 2.4 sq. ft. (0.2 sq. m)Max. per Chamber 40.8 sq. ft. (3.8 sq. m)Standard, Maximum 4, 17Water Jacket Volume 11.7 gal. (43.5 L)CONSTRUCTION

Interior Volume 6.5 cu. ft. (184.1 L)Interior Type 304, mirror finish, stainless steelExterior 18 gauge, cold-rolled steel, powder coatedELECTRICAL

Rated Voltage 120V, 60Hz, 3.6 FLA(Operating range 90-125V)

Circuit Breaker/Power Switch 6 Amps/2 PolePlug NEMA 5-15Alarm Contacts Power interruption; deviation of temp, CO2

DIMENSIONS

Exterior (w x h x d) inch/cm 26 x 39.5 x 25 (66.8 x 100.3 x 63.5)Interior (w x h x d) inch/cm 21.3 x 26.8 x 20 (54.1 x 68.1 x 50.8)WEIGHT

Net 265 lbs. (120.2 kg)Net Operational 365 lbs. (166 kg)Shipping 324 lbs. (147 kg)

07

THERMO SCIENTIFIC WATER JACKET CO2 INCUBATORSTECHNICAL SPECIFICATIONS

Our advanced model 3950 offers beneficial features foroptimal culturing environment.• Internal volume of 29 cu. ft.• Heated triple-pane glass door minimizes condensation andpermits a clear view of your product.

• Horizontal airflow provides tighter temperature uniformityfor optimum culturing environment.

• Adjustable rH system – three convenient settings: low,medium and high

• Enviro-ScanTM Microprocessor Message Center allows youto control all parameters without complicated programming.

Heavy-duty, solid stainless steel shelves areeasy-to-clean, corrosion resistant

Standard remote alarm contacts and availabledata outputs allow connection to an in-housemonitor/alarm system to track chamberconditions, helping you meet internal andregulatory documentation requirements

Swivel, locking casters ensure easy mobilityfor installation and cleaning. Leveling feetprovide stability for added safety in the lab.

Interior and exterior accessory receptaclesprovide a convenient power source

Two thru-wall access ports (one on right andleft sidewalls) for easy addition of probes,sensors, or power cords

Thermo Scientific Large Capacity CO2 IncubatorsExpanded capacity for high throughput laboratories

air across the surface of each solidshelf. Even when filled with samplesor equipment, each shelf receives aconsistent flow of conditioned airfor optimum temperature uniformityand recovery. Our design ensuresthe feed plenum cannot be blockedby the chamber’s contents.

Advantages of a Directed HorizontalLaminar Airflow SystemOur advanced 3950 incubator’sdirected airflow system includes apositive pressure feed plenum onthe left side of the chamber and anegative pressure return plenum onthe right. This combination directs

08

Our Standard models 393 and 397 provide large storagecapacity at superior value.• Accurate, microprocessor-based controls and TC CO2sensor for precise and reliable control

• Homogeneous, vertical flow, air circulation systemeliminates chamber stratification

• Each model includes five shelves• Optional CO2 autochange switches automatically fromempty to full cylinders

• A security password feature protects your set points toprevent unwanted changes

09

CO2 and Temperature Control• Temperature range is from 5°C above ambient to 60°C.• CO2 concentration is from 0-20% with ±0.1% control

as monitored by a TC sensor.• Audible alarm notifies you of temperature deviations

±1°C and CO2 deviations greater than 1% from theset point, excluding deviations due to door openings

397 is our standard model in a 28 cu. ft. size with full sizeheated glass door for easy visibility and condensationfree operation. The humidity is generated by aremovable water pan in the bottom of the chamber.

393 is our standard plus model in size and features.The 393 offers the largest capacity, 34 cu. ft., withbuilt-in humidity control and display, and a solid door.

10

TEMPERATURE

Control ±0.1°CRange 5°C above ambient to 60°C (40°F)Uniformity ±0.3°C @ 37°C (98.6°F)Tracking Alarm User-programmable high/lowTEMPERATURE SAFETY

Sensor Precision thermistorController Independent analog electronicSetability 0.1%CO2

CO2 Control Better than ±0.1%CO2 Range 0-20%Inlet Pressure Required 15 PSIG (1.0 bar)CO2 Sensor TCReadability & Setability 0.1%Tracking Alarm User-programmable high/lowHUMIDITY

RH Ambient to 95% @ 37°C (98.6°F)Humidity Source 3.2 qt. (3.0 liters) standard, panFITTINGS

Access Port 2.4" (6.1cm) I.D., one on each side, with stopperCO2 Inlet 1/4" hose (barbed)Water Inlet 1/4" MPTCondensate Drain 3/8" FPTOverflow Drain 3/8" MPTUNIT HEAT LOAD

115V 510 BTU/Hr

SHELVES

Dimensions (w x h) inch/cm 30.6 x 25.8 (77.7 x 65.5)Construction Type 304, 2B finish, solid stainless steelSurface Area 5.4 sq. ft (0.5 sq. m)Max. per Chamber 145.8 sq. ft. (13.5 sq. m)Standard, Maximum 4, 17Water Jacket Volume 11.7 gal. (43.5 L)CONSTRUCTION

Interior Volume 29.0 cu. ft. (821.2 liters)Interior Type 304, 2B finish, stainless steelExterior Cold-rolled steel, powder coatedInsulation 2.0" (5.1cm) fiberglassExterior Door Heated, triple pane, tempered glassOuter Door Gasket Molded vinylELECTRICAL

Rated Voltage 115V, 50/60Hz, 10.0 FLA(Operating range 90-125V)

Circuit Breaker/Power Switch 15 Amps/2 PolePlug NEMA 5-15Alarm Contacts Power interruption; deviation of temp, CO2

DIMENSIONS (w x h x d)Exterior inch/cm 38 x 80 x 33 (96.5 x 203.2 x 83.8)Interior inch/cm 31 x 60 x 27 (78.7 x 152.4 x 68.6)WEIGHT

Net 500 lbs. (226.8 kg)Shipping (Motor) 660 lbs. (299.4 kg)

397 393TEMPERATUREControl ±0.1°C ±0.1°CRange 5°C above ambient to 60°C 5°C above ambient to 60°CUniformity 0.5°C @ 37°C 0.5°C @ 37°COvertemp 0 - 121°C 0 - 121°CCO2

Control 0,10% 0,10%Range 0-20% 0-20%Inlet Pressure Required 15 PSIG 20 PSIGSensor Type TC TCReadability & Setability 0.1% 0.1%Alarm ±1% above/below set point ±1% above/below set pointHUMIDITYrH NA not controlled 20% above ambient

ambient to 98% at 37°C to 98% at 37°CHumidity Source Pan, 1 gal. (4 L) Integral humidifier

(3 lbs. per hour)FITTINGSFill Port N/A Compression fitting 1/4"Drain N/A floor mounted, pluggedCO2 Inlet 1/4" hose (barbed) 1/4" hose (barbed)UNIT HEAT LOAD120V 7.5 Amps., 900W 10 Amps., 1200W

397 393SHELVESDimension 20" x 27.9" 24.2" x 35.2"Construction Stainless steel, perforated Stainless steel, perforatedSurface Area (sq. in.) 558 852Max. per Chamber (sq. in.) 3348 standard / 6138 max. 4260 standard / 7668 max.Standard, Maximum 6 / max. 11 5 / max 9CONSTRUCTIONInterior Volume 28 cu. ft. (793 L) 34 cu. ft. (963 L)Interior 304, mirror finish, stainless steel 304 stainless steelExterior 18 gauge 430 stainless steel, 18 gauge cold rolled steel,

powder coated powder coatedOuter door glass, heated, no lock solid, lockableELECTRICAL

All 120V, 60Hz, 8A 120V, 60Hz, 11.7ACircuit Breaker/Power Switch 15 Amp/16 Amp green lighted 15 Amp/16 Amp green lightedPlug NEMA 5-15 NEMA 5-15Alarm Contacts None (internal audible alarm) None (internal audible alarm)DIMENSIONS (w x h x d)Exterior 33.5 x 76.5 x 28.75 42 x 91 x 35Interior 28.5 x 63.5 x 26.75 36 x 65 x 25WEIGHTNet 625 lbs. (383kg) 660 lbs. (299kg)Shipping 900 lbs. (408 kg) 1020 lbs. (463kg)

THERMO SCIENTIFIC LARGE CAPACITY CO2 INCUBATORTECHNICAL SPECIFICATIONS

LARGE CAPACITY STANDARD CO2 INCUBATOR393/397

LARGE CAPACITY ADVANCED CO2 INCUBATOR3950

11

ORDERING INFORMATIONCAT. NO. DESCRIPTIONJ1397-10 Large Capacity CO2 Incubator Standard, Model 397, 28 cu. ft., capacity stainless steel chamber, w/ TC CO2 sensor, 120V, 60Hz

J1752-30 Large Capacity CO2 Incubator Standard Plus Model 393, 34 cu. ft. capacity stainless steel chamber, w/ TC CO2 sensor,Water Jacket, 120V, 60Hz

J1805-30 Large Capacity CO2 Incubators Advanced Model 3950, selectable RH, 29 cu. ft., TC CO2 sensor, 115V, 60Hz

J1805-41 Carboy Kit, for model 3950, 2 Gallon (7.8 Liters), autoclavable with valve, adaptor hose & mounting bracket, customer installed

J1805-42 Lexan inner door kit for 3950, factory installed

J1805-43 Door lock assembly for 3950, factory installed

J1805-44 Universal door cover for glass doors, factory installed for 3950

J1805-45 Stainless steel shelf kit for 3950

J1805-46 Perforated shelf kit for 3950

J1805-39 Two stage CO2 regulator

J1805-40 External gas guard

© 2009 Thermo Fisher Scientific Inc. All rights reserved. All trademarksare the property of Thermo Fisher Scientific Inc. and its subsidiaries.Specifications, terms and pricing are subject to change. Not all productsare available in all countries. Please consult your local sales representativefor details.

For additional information, please callyour Cardinal Health sales representativeor customer service at 1.800.964.5227

Lit No.

Cardinal Health7000 Cardinal PlaceDublin, Ohio 43017

cardinalhealth.com