A Free Project SheetNOT FOR RESALE

Finished Quilt Size: 57” x 77”49 West 37th Street, 14th floor, New York, NY 10018

Toll Free: 800-294-9495fax: 212-679-4578

www.blankquilting.netPlease check our website for pattern updates before starting this project.

Thriller NightThriller NightQuilt 1

Skill Level: Advanced Beginner

Qui

lt D

esig

n by

Hei

di P

ridem

ore

Thriller NightFabrics in the Thriller Night Collection

Select Fabric from the

Urban Legend Collection

Finished Quilt Size: 57” x 77”

Quilt 1

Halloween Panel - Slate1010PG-79

Portraits - Black1011G-99

Jack-o-lanterns - Black1012G-99

Flying Witches - Slate1013G-79

Branches - Slate1014G-79

Graveyard - Slate1015G-79

Black Cats - Slate1016G-79

Halloween Gnomes - Orange1017G-33

Spiders - Black1018G-99

Skulls - Black1019G-99

Lightning Streaks - Black1020G-99

Orange7101-30

Page 1Thriller Night Quilt 1

Cutting Instructions Please note: all strips are cut across the width of fabric (WOF) from selvage to selvage edge unless otherwise noted.

Fig. 2

Fig. 1

Fig. 3 Fig. 4 Fig. 5

Materials1 panel Halloween Panel - Slate (A) 1010PG-791 ¾ yards Urban Legend - Orange (B) 7101-30*¼ yard Lightning Streaks - Black (C) 1020G-99⅜ yard Branches - Slate (D) 1014G-79¼ yard Black Cats - Slate (E) 1016G-79¼ yard Spiders - Black (F) 1018G-99¼ yard Flying Witches - Slate (G) 1013G-79¼ yard Halloween Gnomes - Orange (H) 1017G-33¼ yard Graveyard - Slate (I) 1015G-791 ⅝ yards Portraits - Black (J) 1011G-992 yards Jack-o-lanterns - Black (K) 1012G-995 yards Skulls - Black (Backing) 1019G-99

*Includes binding

From the Halloween Panel - Slate (A):• Fussy cut (1) 22 ½” x 42 ½” strip centered on the panel.

From the Urban Legend - Orange (B), cut:• (5) 2 ½” x WOF strips. Sub-cut (72) 2 ½” squares.• (2) 2” x 42 ½” WOF strips, piece as needed.• (2) 2” x 25 ½” WOF strips.• (3) 1 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 1 ½” x 52 ½” strips.• (2) 1 ½” x 34 ½” WOF strips.• (4) 1 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 1 ½” x 65 ½” strips.• (3) 1 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 1 ½” x 47 ½” strips.• (7) 2 ½” x WOF for the binding.

From the Lighting Streaks - Black (C), cut:• (1) 4 ½” x WOF strip. Sub-cut (4) 4 ½” squares. From the Branches - Slate (D), cut:• (1) 5 ½” x WOF strip. Sub-cut (4) 5 ½” squares.• (1) 4 ½” x WOF strip. Sub-cut (8) 4 ½” squares.

From the Black Cats - Slate (E), cut:• (1) 4 ½” x WOF strip. Sub-cut (4) 4 ½” squares.

From the Spiders - Black (F), cut:• (1) 4 ½” x WOF strip. Sub-cut (6) 4 ½” squares.

From the Flying Witches - Slate (G), cut:• (1) 4 ½” x WOF strip. Sub-cut (4) 4 ½” squares.

From the Halloween Gnomes - Orange (H), cut:• (1) 4 ½” x WOF strip. Sub-cut (8) 4 ½” squares.

From the Graveyard - Slate (I), cut:• (1) 4 ½” x WOF strip. Sub-cut (4) 4 ½” squares.

From the Portraits - Black (J), fussy cut: • (2) 6” x 54 ½” Length of Fabric (LOF) strips each centered on a strip of frames.• (2) 6” x 45 ½ WOF strips each centered on a strip of frames, piece as needed.

From the Jack-o-lanterns - Black (K), cut:• (2) 5 ½” x 67 ½” LOF strips.• (2) 5 ½” x 47 ½” WOF strips, piece as needed.

From the Skulls - Black (Backing), cut:• (2) 85” x WOF strips for the backing. Sew the strips together and trim to make the 65” x 85” back.

Block Assembly Note: The arrows in figures represent the fabric print direction. Pay attention to the fabric and unit orientations when assembling the various components.1. Sew (1) 2” x 42 ½” Fabric B strip to each side of the 22 ½” x 42 ½” panel. Sew (1) 2” x 25 ½” Fabric B strip to the top and to the bottom of the Fabric A panel. Trim the block to measure 24 ½” x 44 ½” to make the Center Block (Fig. 1).

B

A

Trim blockto measure

24 ½” x 44 ½”AFTER adding

borders

B

B B

Center Block

Unit 1make 4

HB

B

2. Place (1) 2 ½” Fabric B square on the top right corner of (1) 4 ½” Fabric H square, right sides together (Fig. 2). Sew across the diagonal of the smaller square from the upper left corner to the lower right corner (Fig. 2). Flip open the triangle formed and press (Fig. 3). Trim away the excess fabric from behind the triangle ¼” away from the sewn seam.

3. Follow Figure 4 for the seam direction to add a 2 ½” Fabric B square to the lower right corner of the 4 ½” Fabric H square to make (1) Unit 1 square (Fig. 5).

4. Repeat Steps 2-3 to make (4) Unit 1 squares total.

Page 2Thriller Night Quilt 1

Fig. 13Fig. 11 Fig. 12

Fig. 14 Fig. 16

Fig. 18

Fig. 15 Fig. 17

Fig. 19 Fig. 20

Fig. 21

Fig. 22

Unit 2make 4

DB

B

Unit 3make 2

IB

B

Unit 4make 6

F

B

B

Unit 5make 4

HB

B

Unit 6make 4

DB

B

Unit 7make 2

IB

B

G

Unit 8make 2

B B

E

Unit 9make 4

B B

Unit 10make 1

B

C

Unit 11make 1

B

C

Unit 12make 1

B

C

Unit 13make 1

B

C

G

Unit 14make 2

B B

Unit1

Unit2

Unit3

Unit3

Unit2

Unit2

Unit2

Unit1

Unit4

Unit1

Unit1

Left SideBorder

Unit7

Unit7

Unit6

Unit6

Unit6

Unit6

Unit4

Unit5

Unit5

Unit5

Unit5

Right SideBorder

Unit10

Unit8

Unit9

Unit4

Unit4

Unit9

Unit8

Unit11

Top Border

Unit4

Unit4

Unit14

Unit9

Unit9

Unit14

Unit12

Unit13

Bottom Border

Fig. 7 Fig. 8 Fig. 9

Fig. 10

Fig. 6

5. Repeat Steps 2-3 and refer to Figures 6-18 for fabric identification, placement, seam direction and orientation to make (4) Unit 2 squares, (2) Unit 3 squares, (6) Unit 4 squares, (4) Unit 5 squares, (4) Unit 6 squares, (2) Unit 7 squares, (2) Unit 8 squares, (4) Unit 9 squares, (1) Unit 10 square, (1) Unit 11 square, (1) Unit 12 square, (1) Unit 13 square and (2) Unit 14 squares.

6. Refer to Figure 19 and sew (11) assorted units together to make the Left Side Border. Refer to Figure 20 and sew (11) assorted units together to make the Right Side Border.

7. Refer to Figure 21 and sew (8) assorted units together to make the Top Border. Refer to Figure 22 and sew (8) assorted units together to make the Bottom Border.

©2019 Blank Quilting Corp.

Every effort has been made to ensure that all projects are error free. All the information is presented in good faith, however no warranty can be given nor results guaranteed as we have no control over the execution of instructions. Therefore, we assume no responsibility for the use of this information or damages that may occur as a result. When errors are brought to our attention, we make every effort to correct and post a revision as soon as possible. Please make sure to check www.blankquilting.net for pattern updates prior to starting the project. We also recommend that you test the project prior to cutting for kits. Finally, all free projects are intended to remain free to you and are not for resale.

Page 3Thriller Night Quilt 1

Quilt Layout

D D

D D

K

K K

K

J

B

B

B

B B B B

B

Center Block

J

J J

Quilt Top Assembly (Follow the Quilt Layout while assembling the quilt top.)8. Sew the Left, Right, Top and Bottom Borders to the sides, top and bottom of the Center Block.

9. Sew (1) 1 ½” x 52 ½” Fabric B strip to each side of the Center Block. Sew (1) 1 ½” x 34 ½” Fabric B strip to the top and to the bottom of the Center Block.

10. Sew (1) 6” x 54 ½” Fabric J strip to each side of the Center Block. Sew (1) 6” x 45 ½” Fabric J strip to the top and to the bottom of the Center Block.

11. Sew (1) 1 ½” x 65 ½” Fabric B strip to each side of the Center Block. Sew (1) 1 ½” x 47 ½” Fabric B strip to the top and to the bottom of the Center Block.

12. Sew (1) 5 ½” x 67 ½” Fabric K strip to each side of the Center Block. Sew (1) 5 ½” Fabric D square to each end of (1) 5 ½” x 47 ½” Fabric K strip. Repeat to make a second strip. Sew the strips to the top and to the bottom of the Center Block to make the quilt top.

13. Layer and quilt as desired.

14. Sew the (7) 2 ½” x WOF Fabric B strips together, end to end with 45-degree seams, to make the binding. Fold this long strip in half lengthwise with wrong sides together and press.

15. Bind as desired.