Upload
hoangxuyen
View
215
Download
1
Embed Size (px)
Citation preview
Wire rope accessories
3www.tecklenborg-kegel.de • We reserve the right to amend technical data • © 2011
Wire rope clips
similar to (DIN 1142) EN 13411-5
• Material: Bridge: Malleable steel, U-bolt: Mild steel
• Standard: Similar to EN 13411-5 Type B, formerly DIN 1142
• Finish: Electro-galvanized
• Certification: Upon request!
dia wire rope
dia bow length bow width inside
length thread
length base
thickness base
height base
weight per 100 pcs.
mma
mmb
mmc
mmd
mme
mmf
mmg
mm in kg
5 4 25 12 14 25 13 13 2
6,5 5 32 14 17 30 16 14 4
8 7 41 18 20 39 20 18 8,2
10 7 46 20 24 40 20 21 9,2
12 10 56 24 28 50 25 24 21,5
13 11 64 29 29 55 28 29 27,5
14 12 66 28 31 59 30 28 39,5
16 12 76 34 35 64 32 35 43
19 12 83 37 36 68 33 40 49
22 14 96 41 40 74 34 44 68
26 18 111 46 50 84 38 51 117
30 18 127 54 55 95 41 59 140
34 22 141 60 60 105 45 67 213
40 24 159 68 65 117 49 77 268
4www.tecklenborg-kegel.de • We reserve the right to amend technical data • © 2011
• Material: Bridge: Casted, U-bolt: Mild steel
• Finish: Electro-galvanized
• Certificates: Upon request!
dia wire rope
dia bow length bow width inside
length thread
length base
thickness base
heightbase
weight per 100 pcs.
mma
mmb
mmc
mmd
mme
mmf
mmg
mm in kg
3 4 20 9 12 21 10 10 1,4
5 5 24 11 13 23 11 10 1,5
6 5 28 13 15 26 12 11 2,1
8 6 34 16 19 30 14 15 4,1
10 8 42 19 22 34 18 17 6,8
11 8 44 20 22 36 19 18 7,2
13 10 55 24 30 42 23 21 13
14 10 57 25 30 44 23 22 13,5
16 12 63 29 33 50 26 26 21
19 12 75 32 38 54 29 30 28
22 14 85 37 44 61 33 34 40
26 14 95 41 45 65 35 37 44
30 16 110 48 50 74 37 43 66
34 16 120 52 55 80 42 50 85
40 16 140 58 60 88 45 55 104
Wire rope clips similar to DIN 741
5www.tecklenborg-kegel.de • We reserve the right to amend technical data • © 2011
Thimbles similar to DIN 3090
• Material: Mild steel
• Finish: For dia 4 and 6 mm electro-galvanized other diameters hot dipped galvanized
• Certificates: Upon request!
dia wire rope
width groove
width width inside length inside thickness thickness back
weight per 100 pcs.
mma
mmb
mmc
mmd
mme
mmf
mm in kg
4 5 9 10 20 5,1 2,1 1,4
6 7 12 15 30 7,1 2,6 3
8 9 13 20 40 11 4 7,1
10 11 16 25 50 14 5 17
12 13 19 30 60 16 6 24
14 16 22 35 70 17 7 36
16 18 25 40 80 19 8 50
18 20 27 45 90 21 9 62
20 22 32 50 100 23 10 90
22 24 33 55 110 24 10 100
24 26 37 60 120 27 11 130
26 29 46 65 130 30 12 220
28 31 50 70 140 33 12 240
32 35 55 80 160 38 14 270
36 40 60 90 180 42 16 430
40 44 65 100 200 46 18 570
44 48 70 110 220 53 20 850
48 53 75 120 240 58 22 1.120
52 57 80 130 260 64 25 1.530
56 62 85 140 280 67 25 2.148
60 66 90 150 300 70 25 2.300
64 70 95 160 320 78 30 3.500
68 75 100 170 340 81 30 3.700
72 79 105 180 360 84 30 4.100
76 84 115 190 380 87 30 4.600
80 88 120 200 400 90 30 5.400
6www.tecklenborg-kegel.de • We reserve the right to amend technical data • © 2011
• Material: Mild steel
• Finish: Hot dipped galvanized
• Certificates: Upon request!
nominal size width groove length inside width inside thickness back weight per 100 pcs.
amm
bmm
cmm
dmm in kg
0,4 8 36 20 3 4,5
0,6 11 50 28 4 9,5
1 13 60 32 5 18
1,6 15 68 38 6 24
2 17 76 42 7 38
2,5 19 85 48 8 50
3 21 95 53 9 70
4 24 110 60 10 110
5 28 125 70 10,5 141
6 30 135 75 12 254
8 34 150 85 13 282
10 38 170 95 15 418
12 42 190 105 16 513
16 46 205 115 16 550
20 50 225 125 18 930
25 56 250 140 20 1.303
31 62 280 155 21 1.363
40 68 306 170 23 1.930
Thimbles similar to DIN 83311
7www.tecklenborg-kegel.de • We reserve the right to amend technical data • © 2011
Thimbles similar to DIN 6899 (B)
• Material: Mild steel
• Finish: Electro-galvanized
• Certificates: Upon request!
dia wire rope
width groove width length inside width inside thickness back weight per 100 pcs.
mma
mmb
mmc
mmd
mme
mm in kg
2,5 3 22 19 12 1,6 0,5
3,5 4 26 21 13 1,6 0,8
4 5 32 23 14 1,9 1
5 6 38 25 16 2,4 1,6
6 7 44 28 18 2,4 1,9
7 8 51 32 20 2,8 3
9 10 57 38 24 3,1 4,7
11 12 64 45 28 3,3 6,8
13 13 70 48 30 3,3 8
13 14 76 51 32 3,7 10
15 16 83 58 36 3,8 14,5
16 17 89 61 38 4,7 18
17 18 95 64 40 4,7 20
18 20 102 72 45 5,7 29
20 22 114 80 50 5,7 32
22 24 127 90 56 6,5 47
24 26 140 99 62 6,8 59
26 28 152 112 70 8 80
28 30 165 120 75 8 110
30 32 178 128 80 8 123
32 34 203 152 95 8,5 156
34 36 216 160 100 8,5 176
36 38 229 176 110 8,5 192
38 40 241 184 115 10,5 292
40 42 254 192 120 10,5 320
42 45 305 240 150 10,5 364
8www.tecklenborg-kegel.de • We reserve the right to amend technical data • © 2011
Thimbles similar to DIN 3091
• Material: Cast mild steel (GTW 40)
• Finish: Self coloured
• Certificates: Upon request!
dia wire rope
width groove
width length raw measure
max. dia length weight per 100 pcs.
mma
mmb
mmc
mmd
mm mme
mm in kg
8 9 40 66 14 20 — 18
10 11 50 82 18 25 — 32
12 13 60 98 21 30 — 52
14 16 70 114 25 35 — 80
16 18 80 130 28 40 16 90
18 20 90 145 31 45 18 121
20 22 100 161 35 50 20 161
22 24 110 177 38 55 22 211
24 26 120 193 41 60 24 271
26 29 130 209 44 65 26 355
28 31 140 224 47 70 28 420
32 35 160 256 53 80 32 630
36 40 180 288 59 90 36 884
40 44 200 320 65 100 40 1.100
44 48 220 352 70 110 44 1.500
48 53 240 384 76 120 48 2.000
52 57 260 416 81 130 52 2.500
56 62 280 448 86 140 56 3.200
64 70 320 512 95 160 64 4.600
72 79 360 576 104 180 72 6.600
80 88 400 640 112 200 80 9.000
9www.tecklenborg-kegel.de • We reserve the right to amend technical data • © 2011
• Material: Housing: Nom. size 5-14 (GTW 40) acc. (DIN 1692) EN 1562, nom. size 17-20 (GTS 35) acc. (DIN 1692) EN 1562, nom. size 25-40 (E-GS 52) acc. (DIN 1692) EN 1562 wedges: GG–18 nach (DIN 1691) EN 1561
• Finish: Self coloured
nominal size
dia wire rope
mm
b
mm
e
mm
s1
mm
s2
mm
d
mm
r
mm
h1
mm
h2
mm
w
mm
weight per pc.
in kg
5 4−5 12 14 3 — 10 12 68 110 19 0,17
8 6−8 14 20 4 — 12 18 92 150 25 0,50
11 9−11 17 26 6 — 16 23 117 190 32 1,04
14 12−14 22 32 8 — 18 28 141 230 38 2,07
17 15−17 25 36 10 — 22 32 162 260 46 3,66
20 18−20 27 40 12 — 25 35 186 300 52 5,35
25 22−25 33 40 12 — 40 44 180 285 60 6,22
30 26−30 40 55 14 22 50 55 182 335 62 10,1
35 31−35 44 60 27 35 55 60 207 390 68 23,64
40 36−40 50 70 29 37 60 65 231 460 70 33
Open wedge socket acc. to former DIN 15315
10www.tecklenborg-kegel.de • We reserve the right to amend technical data • © 2011
Open wedge sockets similar to DIN 43148
• Material: Housing: Till rope dia 12 – 15 (GTW 40) acc. (DIN 1692) EN 1562
till rope dia 16-20 (GS 60.1) acc. (DIN 1681) EN 1562EN 1562 wedges: GTW 40 acc. (DIN 1692) EN 1562
• Finish: Hot dipped galvanized
nominal size
dia wire rope
mm
number of holes in the wedge
WLL breaking load
kp
b
mm
e
mm
s
mm
d
mm
r
mm
h1
mm
h2
mm
w
mm
weight per pc.
in kg
6−7 3 500 6.000 14 20 6 14 17,5 93,5 150 30 0,755
8 2 500 6.000 14 20 6 14 17,5 85,5 150 24 0,695
9−12 1 500 6.000 14 20 6 14 17,5 80 150 20 0,655
10−12 2 1.000 8.000 16 22 7 17 18,0 85,5 162 24 0,82
12−14 1 1.000 8.000 16 22 7 17 18,0 80 162 20 0,78
12−15 0 2.500 15.000 17 28 10 20 25,0 110 218 36 2,56
16−20 0 4.000 25.000 24 35 14 25 30,0 141,5 250 51 5,04
21−26 0 7.000 60.000 30 45 18 34 40,0 204 370 68 12,36
27−32 0 10.000 100.000 36 61 27 50 56,0 230 426 80 28
11www.tecklenborg-kegel.de • We reserve the right to amend technical data • © 2011
no-minal size
WLLb d1 d2 d3 d4 e1 e2 f h i r
weight per pc.
t up to mm mm mm mm mm mm mm mm mm mm mm in kg
1 1 10 12 30 14 30 26 45 50 48 15 130 12 2 0,4
1,6 1,6 12 14 37 17 36 30 55 60 57 19 155 15 3 0,71
2,5 2,5 14 18 45 20 42 33 62 69 66 24 182 19 3 1,2
3 3,15 16 20 50 22 47 36 69 78 75 26 202 21 3 1,5
4 4 18 22 54 24 51 40 78 84 81 30 220 24 3 2
5 5 20 24 60 27 57 44 84 94 90 34 245 27 4 3,1
6 6,3 22 28 67 30 64 49 94 106 102 38 275 30 4 4,2
8 8 26 30 73 33 70 54 103 115 111 42 300 33 4 5,8
10 10 28 34 80 36 76 60 112 125 120 45 330 36 5 8
12 12,5 32 38 89 40 85 67 125 140 135 51 370 41 5 11
16 16 36 44 100 45 96 75 140 159 153 56 415 46 6 15
20 20 40 50 110 50 106 84 156 174 168 62 460 50 6 20
25 25 44 54 120 55 116 93 173 190 183 69 505 55 7 27
32 31,5 50 62 132 60 127 104 188 209 201 76 555 61 8 35
40 40 58 72 150 68 144 117 212 237 228 85 630 68 9 50
50 50 62 76 165 75 159 130 235 262 252 94 695 75 10 67
for dia wire rope
Closed spelter socketsDIN 83313, Type A
12www.tecklenborg-kegel.de • We reserve the right to amend technical data • © 2011
Type C with safety bolt
Type B
Open spelter sockets DIN 83313, Type B and C
no-minal size
WLLb1 b2 b3 b4 d1 d2
threadd3 h s
weight per pc.
t up to mm mm mm mm mm mm mm mm in kg
1 1 10 12 30 21 13 47 14 16 M 16 105 22 0,6
1,6 1,6 12 14 37 27 17 61 17 20 M 20 125 27 1,1
2,5 2,5 14 18 45 33 21 75 20 24 M 24 148 32 1,8
3 3,15 16 20 50 38 24 86 22 27 M 27 165 36 2,4
4 4 18 22 54 42 27 96 24 30 M 30 180 41 3,2
5 5 20 24 60 47 30 107 27 36 M 36 200 46 5
6 6,3 22 28 67 53 34 121 30 39 M 39 220 50 6,7
8 8 26 30 73 60 38 136 33 45 M 45 242 55 9,5
10 10 28 34 80 66 42 150 36 48 M 48 265 60 13
12 12,5 32 38 89 73 47 167 40 52 M 52 296 65 17
16 16 36 44 100 81 52 185 45 60 M 60 332 75 24
20 20 40 50 110 90 58 206 50 68 M 68 365 85 31
25 25 44 54 120 100 63 226 55 72 M 72x6 405 90 41
32 31,5 50 62 132 110 70 250 60 80 M 80x6 440 100 55
40 40 58 72 150 125 79 283 68 90 M 90x6 500 110 80
50 50 62 76 165 140 88 316 75 100 M 100x6 550 120 105
for dia wire rope
13www.tecklenborg-kegel.de • We reserve the right to amend technical data • © 2011
• Material: High tensile steel GS21MN5
• Safety factor: MBL equals 5 x WLL
• Finish: Painted green, hot dipped galvanized upon request
• Certificates: Upon request!
number WLL dia wire rope
length width width inside bow
length inside bow
thick-ness bow
thick-ness bow
opening weight per pc.
to mma
mmb
mmc
mmd
mme
mmf
mmg
mm in kg
298 4 11−13 140 51 30 59 17,5 22,5 14 0,7
299 5 14−16 162 67 36 65 21 26 17,5 1,3
200 8 18−19 194 76 42 78 27 32 21 2,1
201 10 20−22 224 92 47 90 33 38 24 3,6
204 12,6 23−26 253 104 57 103 36 44 28 5,3
207 16 27−30 282 114 63 116 39 51 32 7
212 20 31−36 312 127 70 130 43 57 38 9,7
215 25 37−39 358 136 79 155 51 63 41 13
217 32 40−42 390 146 83 171 54 70 44 17
219 40 43−48 443 171 93 198 55 76 51 26
222 50 49−54 502 193 100 224 62 82 57 37,5
224 64 55−60 548 216 112 247 73 92 63 50
226 80 61−68 597 241 140 270 79 102 73 65
227 90 69−75 644 273 159 286 79 124 79 94
228 100 76−80 686 292 171 298 83 133 86 110
229 120 81−86 743 311 184 311 102 146 92 145
230 140 87−93 788 330 197 330 102 159 99 168
231 160 94−102 845 362 216 356 108 178 108 210
233 200 108−115 1.000 405 235 425 125 190 125 330
240 240 120−130 1.110 515 260 475 135 210 138 550
Green Pin closed spelter sockets
14www.tecklenborg-kegel.de • We reserve the right to amend technical data • © 2011
Green Pin closed spelter sockets
• Material: High tensile steel GS21MN5
• Safety factor: MBL equals 5 x WLL
• Finish: Painted green, hot dipped galvanized upon reques
• Certificates: Upon request!
number WLL wire rope dia
length width dia bolt length inside
opening weight per pc.
to mma
mmb
mmc
mmd
mme
mm in kg
198 4 11−13 142 25 25 38 14 1
199 5 14−16 171 32 30 48 17,5 1,8
100 8 18−19 205 38 35 58 21 3,2
104 10 20−22 235 44 41 68 24 4,6
108 12,6 23−26 275 51 51 75 28 8
111 16 27−30 306 57 57 85 32 11
115 20 31−36 338 63 63 95 38 16
118 25 37−39 394 76 70 127 41 23
120 32 40−42 418 76 76 127 44 27
125 40 43−48 468 89 89 133 51 41
128 50 49−54 552 101 95 180 57 58
130 64 55−60 598 113 108 196 63 85
132 80 61−68 654 127 121 212 73 118
135 90 69−75 696 133 127 215 79 155
138 100 76−80 737 146 133 219 86 173
140 120 81−86 788 159 140 228 92 230
142 140 87−93 852 171 152 242 99 265
144 160 94−102 914 191 178 254 108 370
146 200 108−115 1.145 205 195 382 125 525
150 240 120−130 1.280 225 250 375 138 900
15www.tecklenborg-kegel.de • We reserve the right to amend technical data • © 2011
Cable and wire pulling stockings
handmade of galv. strands tensile strenght 1770 N / mm² back braided ends with one thimble
closed with one thimbleorder-no. 100
open with two thimblesorder-no. 200
order-no.1thimble
order-no. 2 thimbles
dia cable
mm
tensile force
kN
dia thimble 1mm
dia thimble 2mm
110 210 8–15 4,9 18 18
115 215 15–20 10,2 18 18
120 220 20–30 12,8 18 18
130 230 30–40 15,4 20 18
140 240 40–50 17,9 20 18
150 250 50–60 30,3 24 20
160 260 60–70 40,4 28 24
170 270 70–80 40,4 28 24
180 280 80–90 45,5 28 24
190 290 90–100 45,5 28 24
1.100 2.100 100–110 50,6 28 24
1.110 2.110 110–120 50,6 28 24
1.120 2.120 120–130 62,2 45 40
1.130 2.130 130–140 62,2 45 40
1.140 2.140 140–150 62,2 45 45
1.150 2.150 150–160 62,2 45 45
— 2.190 190–200 62,5 — 45
flexible conduits. For fastening the cable reliably to the winch wire when pulling telecommunica-tion and power cables into cable shafts, conduits, trenches, onto racks, etc.
Cable and wire pulling stockings are used for pulling, tightening and moving all types of heavy cables and conduits.
Cable and wire pulling stockings for drawing in and out of all types of cables, line cables and
16www.tecklenborg-kegel.de • We reserve the right to amend technical data • © 2011
both sides openorder-no. 400 order-no. 400/VS
order-no. dia cablemm
tension forcekN
tension force reinforced kN
410 8–15 4,9 7,3
415 15–20 10,2 15,4
420 20–30 12,8 19,2
430 30–40 15,4 23,1
440 40–50 17,9 26,9
450 50–60 30,3 45,5
460 60–70 40,4 60,7
480 80–100 45,5 68,4
4.100 100–120 50,6 75,9
same diameter. The pulling operation should not generate too big torsion, for this case is the appli-cation of two cable connecting stockings, linked with a fish link, recommended.Cable and wire connecting stockings for connec-
ting and exchanging of two cables or ropes with
Cable and wire connecting stockings
Especially for changing crane wire ropes with two different diameters.–Luff ing- and hoist ing wire-
both sides openorder-no. 400/2
Cable and wire connecting stockings
handmade of galv. strands tensile strenght 1770 N / mm² back braided ends with one thimble
17www.tecklenborg-kegel.de • We reserve the right to amend technical data • © 2011
Rigging screws DIN 82004
Type A oval eye
Type B with jaws
Type D with jaw and round eye
Type C with round eyes
Type E with jaw and oval eye
no-minal size
WLL kN *)
a b1 b2 b3 c right hand thread and left hand
thread d1
d2 d3 d4 l1 l2 l3 l4 l5 t adju-stable
0,4 4 29 8 12 10 13 M 12 10 11,5 22 415 379 365 372 397 15 140
0,6 6,3 48 12 16 12 21 M 16 12 14 28 494 420 408 414 457 18 150
1 10 48 12 19 16 21 M 18 16 18 35 529 471 449 460 500 23 165
1,6 16 58 16 23 20 26 M 22 20 23 45 591 521 495 508 556 28 175
2 20 58 16 26 22 26 M 24 22 25 50 625 563 535 546 594 31 190
2,5 25 72 21 29 25 32 M 27 24 27 55 699 607 577 592 653 34 205
3 31,5 72 21 32 28 32 M 30 27 30 60 732 648 614 631 690 36 215
4 40 94 26 35 30 40 M 33 30 33 65 822 692 656 674 757 39 230
5 50 94 26 39 35 40 M 36 36 39 75 854 746 698 722 800 46 240
6 63 108 29 45 40 45 M 42 39 42 85 953 823 773 798 888 51 260
8 80 115 32 49 45 49 M 45 45 48 95 1.049 917 859 888 983 56 295
10 100 125 36 58 50 54 M 52 48 52 110 1.138 998 936 967 1.068 63 315
12 125 144 41 64 55 60 M 56 52 56 120 1.259 1.091 1.019 1.055 1.175 70 345
16 160 163 46 70 60 66 M 64 60 65 130 1.372 1.170 1.096 1.133 1.271 75 365
20 200 173 51 74 65 72 M 72x6 68 74 140 1.468 1.254 1.176 1.215 1.361 80 390
25 250 192 56 80 70 80 M 76x6 72 78 150 1.590 1.346 1.260 1.303 1.468 87 420
32 315 216 60 90 80 90 M 80x6 80 86 170 1.722 1.452 1.352 1.402 1.587 97 450
Measures in mm*) Conversion of the unities for strength and breaking forces similar to DIN 1301 – 1 kp
(Kilopond) = 9,80665 N (Newton); 1 kN (Kilonewton) = 1000 N; 1 kp/mm2 = 9,80665 N/mm2
18www.tecklenborg-kegel.de • We reserve the right to amend technical data • © 2011
• Material: Drop forged, mild steel
d3 l1 l5 d4 b2 b3
adjustable nut x bolt
d3
weight per piece in kg / %
M 8 110 205 8 8 15 85 M 6 x 35,0 26,00
M 10 125 250 8 10 21 90 M 8 x 40,0 45,00
M 12 125 300 10 14 19 90 M 10 x 45,0 66,00
M 16 170 340 10 20 24 125 M 16 x 61,5 151,00
M 20 200 455 12 28 47 150 M 20 x 80,0 293,00
M 24 255 550 12 33 53 180 M 24 x 100,5 500,00
M 30 255 665 16 44 74 180 M 30 x 130,5 997,00
Hexagon bolt and nut similar (DIN 601) EN 24016
Bolt and nut similar DIN 20633
Measures in mm
Rigging screws DIN 1478
jaw - jaw
19www.tecklenborg-kegel.de • We reserve the right to amend technical data • © 2011
Rigging screws eye – hook
similar to DIN 1480
• Material: Drop forged, mild steel
• Finish: Electro-galvanized
dia thread length closed position
length open
position
length body
length length length thread
opening hook
thickness hook
dia eye outside
dia eye inside
weight per pc.
amm
bmm
cmm
dmm
emm
fmm
gmm
hmm
imm
jmm
kmm in kg
6 172 258 110 77 80 55 8 15 20 9 0,11
8 184 264 110 85 84 57 10,5 15 22 10 0,2
10 222 311 125 106 105 68 13 11 31 14 0,28
12 241 324 125 117 111 70 16 13 35 16 0,43
14 261 351 140 124 122 75 18 15 40 18 0,61
16 311 427 170 144 150 88 20 17 47 22 1
20 358 490 200 170 167 105 21 21 52 24 1,6
22 414 559 220 200 186 118 24 28 60 27 2,2
24 453 630 255 215 205 135 26 33 65 27 2,8
30 495 660 255 240 220 135 34 35 71 31 4,1
33 545 744 295 260 245 148 38 40 88 36 6
36 597 782 295 275 277 158 46 45 94 38 8,4
This Rigging screw is also available withhook – hook or eye - eye
Measures upon request!
20www.tecklenborg-kegel.de • We reserve the right to amend technical data • © 2011
• Material: Mild steel
• Safety factor: MBL equals 5 x WLL
• Finish: Hot dipped galvanized
dia thread length body
length closed position
length open
position
dia pin length inside
opening jaw
width jaw
dia jaw eye
WLL weight per pc.
amm
bmm
cmm
dmm
emm
fmm
gmm
hmm
jmm to in kg
6 100 175 255 5 19 7 20 13 0,2 0,16
8 108 199 282 6 25 9 24 14 0,32 0,27
10 125 222 320 8 26 10,5 28 19 0,5 0,45
12 195 320 479 10 32 13 34 22 0,7 0,86
16 230 388 572 12 39 18 42 28 1,2 1,57
20 270 454 672 16 46 20 51 33 1,5 2,67
22 295 490 730 20 55 25 55 38 2,2 3,68
24 325 558 819 22 63 30 70 46 3,2 5,3
33 370 681 977 30 85 38 82 60 4,8 12
39 400 710 1.017 33 86 45 85 76 6 14,2
45 400 760 1.050 39 105 50 100 86 8,5 20,8
48 400 820 1.110 45 120 58 118 92 11 24
• Note: End fittings of 6 and 8 mm rigging screws are electro-galvanized
Closed body rigging screws jaw -jaw
21www.tecklenborg-kegel.de • We reserve the right to amend technical data • © 2011
Green Pin turnbuckles jaw – jaw similar to ASTM F1145-92
• Material: Drop forged high tensile steel SAE 1035 or 1045
• Safety factor: MBL equals 5 x WLL
• Standard: Generally to ASTM F1145-92 formerly U.S. Federal Specification FF-T-791b
• Finish: Hot dipped galvanized
• Certificates: Upon reques
dia thread take up length closed position
length open
position
width inside jaw
length inside jaw
dia bolt thickness jaw eye
dia jaw eye
WLL weight per pc.
aZoll Zoll
bmm
cmm
dmm
emm
fmm
gmm
hmm to in kg
3/8 6 302 416 13 22 8 8 21 0,54 0,37 1/2 8 338 452 16 26 9,5 10 25 1 0,73 1/2 9 414 585 16 26 9,5 10 25 1 0,79 1/2 12 490 719 16 26 9,5 10 25 1 0,96 5/8 6 394 508 18 33 13 13 33 1,59 1,37 5/8 9 470 641 18 33 13 13 33 1,59 1,31 5/8 12 546 775 18 33 13 13 33 1,59 1,53 3/4 6 432 546 23 38 15,5 16 41 2,36 1,86 3/4 9 508 679 23 38 15,5 16 41 2,36 2,31 3/4 12 584 813 23 38 15,5 16 41 2,36 2,56 3/4 18 737 1.080 23 38 15,5 16 41 2,36 3,11 7/8 12 625 854 27 44 19 18 48 3,27 3,71 7/8 18 778 1.121 27 44 19 18 48 3,27 4,141 6 524 638 30 52 22 20 54 4,54 4,291 12 676 905 30 52 22 20 54 4,54 5,071 18 829 1.172 30 52 22 20 54 4,54 6,621 24 980 1.437 30 52 22 20 54 4,54 7,851 1/4 12 760 989 44 73 29 25 67 6,9 9,481 1/4 18 912 1.255 44 73 29 25 67 6,9 11,61 1/4 24 1.064 1.521 44 73 29 25 67 6,9 131 1/2 12 823 1.052 52 70 35 27 80 9,71 13,61 1/2 18 975 1.318 52 70 35 27 80 9,71 14,31 1/2 24 1.128 1.585 52 70 35 27 80 9,71 18,41 3/4 18 1.060 1.403 59 85 41 33 90 12,7 251 3/4 24 1.213 1.670 59 85 41 33 90 12,7 28,72 24 1.315 1.772 64 93 51 39 108 16,78 45,42 1/2 24 1.486 1.943 75 114 57 38 143 27,22 732 3/4 24 1.562 2.019 89 110 70 42 156 34,02 98
www.tecklenborg-kegel.de • We reserve the right to amend technical data • © 201122
Green Pin turnbuckles eye – eye similar to ASTM F1145-92 ASTM F1145−92
• Material: Drop forged high tensile steel SAE 1035 or 1045
• Safety factor: MBL equals 5 x WLL
• Standard: Generally to ASTM F1145-92 formerly U.S. Federal Specification FF-T-791b
• Finish: Hot dipped galvanized
• Certificates: Upon request
dia thread take up length closed posi-
tion
length open posi-
tion
diameter width inside eye
length inside eye
length WLL weight per pc.
aZoll Zoll
bmm
cmm
dmm
emm
fmm
gmm to in kg
3/8 6 302 416 9 13 28 65 0,54 0,32 1/2 8 338 452 12 18 36 80 1 0,66 1/2 9 414 585 12 18 36 80 1 0,76 1/2 12 490 719 12 18 36 80 1 0,91 5/8 6 394 508 14 21 43 98 1,59 1,07 5/8 9 470 641 14 21 43 98 1,59 1,31 5/8 12 546 775 14 21 43 98 1,59 1,71 3/4 6 432 546 17 25 53 113 2,36 1,65 3/4 9 508 679 17 25 53 113 2,36 1,95 3/4 12 584 813 17 25 53 113 2,36 2,30 3/4 18 737 1.080 17 25 53 113 2,36 2,85 7/8 12 625 854 20 31 59 118 3,27 3,33 7/8 18 778 1.121 20 31 59 118 3,27 4,241 6 524 638 22 36 74 155 4,54 3,871 12 676 905 22 36 74 155 4,54 5,091 18 829 1.172 22 36 74 155 4,54 61 24 980 1.437 22 36 74 155 4,54 7,521 1/4 12 760 989 29 45 88 197 6,9 8,121 1/4 18 912 1.255 29 45 88 197 6,9 10,41 1/4 24 1.064 1.521 29 45 88 197 6,9 12,11 1/2 12 823 1.052 32 54 105 215 9,71 12,71 1/2 18 975 1.318 32 54 105 215 9,71 15,11 1/2 24 1.128 1.585 32 54 105 215 9,71 17,11 3/4 18 1.060 1.403 38 60 119 254 12,7 23,11 3/4 24 1.213 1.670 38 60 119 254 12,7 26,32 24 1.315 1.772 45 69 146 308 16,78 40,72 1/2 24 1.486 1.943 51 79 165 344 27,22 642 3/4 24 1.562 2.019 57 83 178 381 34,02 88
Turnbuckle with hook upon request
Niederlassung Wismar
Zum Dock 6 (Gewerbegebiet West)D-23966 Wismar
Telefon: +49(0) 3841/70 46 07Telefax: +49 (0 3841/70 46 06E-Mail: [email protected]
www.tecklenborg-kegel.de
Stammhaus Bremerhaven
Herwigstraße 36D-27572 Bremerhaven
Postfach: 29 04 61D-27534 Bremerhaven
Telefon: +49 (0)471/9 31 83-0Telefax: +49 (0)471/763 27 und 7 50 27 E-Mail: [email protected]