TLA. Replacing The Battery On the Back of the pager press in this button while moving the door away from the pager, then lift up. On the Back of the pager

TLATLA

Replacing The BatteryReplacing The Battery

On the Back of the pager press in On the Back of the pager press in this button while moving the door this button while moving the door away from the pager, then lift up.away from the pager, then lift up.

Negitive (-) end goes on the springNegitive (-) end goes on the spring After the battery is in close the After the battery is in close the

battery door and slide back towards battery door and slide back towards the pagerthe pager

Turning The Pager OnTurning The Pager On

Press and hold the button for Press and hold the button for 1 second.1 second.

You will hear an alert from the pager You will hear an alert from the pager indicating it turning on.indicating it turning on.

You will see the pre-programed You will see the pre-programed message appear on the displaymessage appear on the display

The standby screen will come on.The standby screen will come on.

Standby ScreenStandby Screen

Shows current time and date.Shows current time and date. Shows if there are unread messages.Shows if there are unread messages. Shows if your alert is on audible or Shows if your alert is on audible or

vibratevibrate Shows a Low Battery IndicatorShows a Low Battery Indicator

Standby Status SymbolsStandby Status Symbols

Time hh:mmTime hh:mm Date dd.mm.yyDate dd.mm.yy Unread MessageUnread Message Audible AlertAudible Alert Alert OffAlert Off VibrateVibrate Low BatteryLow Battery Memory FullMemory Full

Pager Option ScreenPager Option Screen

Press to bring up the Pager Press to bring up the Pager Option Screen.Option Screen.

Use or to scroll through Use or to scroll through the option screen.the option screen.

Use to enter into the particular Use to enter into the particular option.option.

Standby Status SymbolsStandby Status Symbols

ArchiveArchive Alarm FunctionAlarm Function Alert SectionAlert Section Display OptionsDisplay Options Time Setting and Timed OffTime Setting and Timed Off Delete All MessagesDelete All Messages OffOff

Turning The Pager OffTurning The Pager Off


Use or to scroll through the Use or to scroll through the option screen and stop on the option screen and stop on the symbol.symbol.

Use to enter into the option.Use to enter into the option. Once you push the button you will Once you push the button you will

see and a flashingsee and a flashing?. Press again to turn the pager off.

TLATLA

Setting The Time And DateSetting The Time And Date

Setting the Date and TimeSetting the Date and Time


Use or to scroll through Use or to scroll through the option screen and stop on the the option screen and stop on the symbol. symbol.

Use to enter into the option.Use to enter into the option.

Time Function ScreenTime Function Screen

When this screen first comes up the When this screen first comes up the will start flashing. will start flashing.

To set the time press To set the time press

Time Function Screen HourTime Function Screen Hour

When this screen first comes up the hour When this screen first comes up the hour will start flashing.will start flashing.

Use or to set the correct hour.Use or to set the correct hour.– **note** If using a 12 hour clock go past 12 to **note** If using a 12 hour clock go past 12 to

go from am to pm or pm to am. go from am to pm or pm to am. Once the correct hour is on the display Once the correct hour is on the display

press to move to the next step.press to move to the next step.

Time Function Screen Minutes Time Function Screen Minutes (tens position)(tens position)

Now the Minutes (tens position) will start Now the Minutes (tens position) will start flashing.flashing.

Use or to set the correct Use or to set the correct Minutes (tens position).Minutes (tens position).

Once the correct Minutes (tens position) is Once the correct Minutes (tens position) is on the display press to move to the on the display press to move to the next step.next step.

Time Function Screen Minutes Time Function Screen Minutes (ones position)(ones position)

Now the Minutes (ones position) will start Now the Minutes (ones position) will start flashing.flashing.

Use or to set the correct Use or to set the correct Minutes (ones position).Minutes (ones position).

Once the correct Minutes (ones position) is Once the correct Minutes (ones position) is on the display press to move to the on the display press to move to the next step.next step.

Time Function Screen Date Time Function Screen Date (Day)(Day)

Now the Date (Day position) will start Now the Date (Day position) will start flashing.flashing.

Use or to set the correct Day Use or to set the correct Day Once the correct Day is on the display Once the correct Day is on the display

press to move to the next step.press to move to the next step.

Time Function Screen Date Time Function Screen Date (Month)(Month)

Now the Date (Month position) will start Now the Date (Month position) will start flashing.flashing.

Use or to set the correct Month Use or to set the correct Month Once the correct Month is on the display Once the correct Month is on the display

press to move to the press to move to the next step.next step.

Time Function Screen Date Time Function Screen Date (Year)(Year)

Now the Date (Year position) will start Now the Date (Year position) will start flashing.flashing.

Use or to set the correct Year Use or to set the correct Year Once the correct Year is on the display Once the correct Year is on the display

press to move to the press to move to the next step.next step.

Time Function Screen 12/24 Time Function Screen 12/24 Hour ClockHour Clock

Now the Clock will start flashing.Now the Clock will start flashing. Use or to set the time format you Use or to set the time format you

want (12 hour or 24 hour) want (12 hour or 24 hour) Once the correct time format is on the Once the correct time format is on the

display press for 2 seconds to exit the display press for 2 seconds to exit the Time Function Screen to the Standby Time Function Screen to the Standby Screen.Screen.

TLATLA

Sleep ModeSleep Mode

Pager Sleep ModePager Sleep Mode

Sets a “shut off” time and a “wake” Sets a “shut off” time and a “wake” time for the pagertime for the pager

Saves Battery LifeSaves Battery Life You will not receive pages while it is You will not receive pages while it is

offoff Example of use:Example of use:

– You get off of work every day at 5pmYou get off of work every day at 5pm– You get in to work at 8amYou get in to work at 8am– Set the pager Sleep Mode from 5:30pm to Set the pager Sleep Mode from 5:30pm to

7:30am so you save battery life7:30am so you save battery life

Setting Sleep ModeSetting Sleep Mode




Time Function ScreenTime Function Screen

When this screen first comes up the When this screen first comes up the will start flashing. will start flashing.

Use or to scroll through the Use or to scroll through the screen and stop on the symbol.screen and stop on the symbol.


Sleep Function ScreenSleep Function Screen

When this screen first comes up the When this screen first comes up the will start flashing.will start flashing.

Use or turn the option on or offUse or turn the option on or off If the times are displayed on the bottom of If the times are displayed on the bottom of

the screen then the function is on, if not the screen then the function is on, if not then it is offthen it is off

Once you push or the time will Once you push or the time will either appear or disappeareither appear or disappear


If you have chosen to turn the function on If you have chosen to turn the function on then once the times are displayed on the then once the times are displayed on the bottom press the button to start bottom press the button to start editing the times.editing the times.

If you are turning this feature off then If you are turning this feature off then simply hold the button down for 2 simply hold the button down for 2 seconds to go back to the Standby Screenseconds to go back to the Standby Screen


The Left Hand Time is the Start time (or shut off time) and The Left Hand Time is the Start time (or shut off time) and the Right Hand Time is the End time (or the wake time)the Right Hand Time is the End time (or the wake time)

Now just like setting the time, first the Hour will start to Now just like setting the time, first the Hour will start to flash.flash.

Use or to change the hour.Use or to change the hour. Once you have the correct starting hour press to Once you have the correct starting hour press to

move to the next digit.move to the next digit. Continue this process until you have both the Shut Off Time Continue this process until you have both the Shut Off Time

and Wake Time adjusted properly.and Wake Time adjusted properly. When finished hold for 2 seconds to go back to the When finished hold for 2 seconds to go back to the

Standby screenStandby screen

Sleep Function FinalSleep Function Final

Now if you selected to have the sleep Now if you selected to have the sleep timer on you will now see this timer on you will now see this displayed on your standby screen.displayed on your standby screen.

TLATLA

AlarmAlarm

Pager AlarmPager Alarm

Sets an Alarm on your pager Like an Sets an Alarm on your pager Like an Alarm Clock.Alarm Clock.

Setting Sleep ModeSetting Sleep Mode





When this screen first comes up the will start When this screen first comes up the will start flashing if the option is on, a will flash if the flashing if the option is on, a will flash if the function is turned offfunction is turned off

Use or turn the option on or offUse or turn the option on or off If the time is displayed on the bottom of the If the time is displayed on the bottom of the

screen then the function is on, if not then it is offscreen then the function is on, if not then it is off Once you push or the time will either Once you push or the time will either

appear or disappearappear or disappear


The Alarm Time is displayed.The Alarm Time is displayed. Now just like setting the time, first the Hour will Now just like setting the time, first the Hour will

start to flash.start to flash. Use or to change the hour.Use or to change the hour. Once you have the correct starting hour press Once you have the correct starting hour press

to move to the next digit. to move to the next digit. Continue this process until you have the time Continue this process until you have the time

adjusted properly.adjusted properly. When finished hold for 2 seconds to go When finished hold for 2 seconds to go

back to the Standby screenback to the Standby screen

Alarm Function FinalAlarm Function Final

Now if you selected to have the Now if you selected to have the alarm on you will now see this alarm on you will now see this displayed on your standby screen.displayed on your standby screen.

TLATLA

Setting Pager AlertSetting Pager Alert

Setting Pager AlertSetting Pager Alert




Pager Alert ScreenPager Alert Screen

The Alert Number is Flasing at this time.The Alert Number is Flasing at this time. Use or to change the alert (you will hear the Use or to change the alert (you will hear the

different tones as you are scrolling.different tones as you are scrolling. As your scrolling you may see . This is the vibrate As your scrolling you may see . This is the vibrate

function.function. You may also see . This means you have shut off the alert You may also see . This means you have shut off the alert

completely. You will get no alert when you receive a page with completely. You will get no alert when you receive a page with this function turned on. As a short cut you can hold down the this function turned on. As a short cut you can hold down the button for 4 seconds to do the turn the alert on and off. button for 4 seconds to do the turn the alert on and off.

Continue this process until you have the alert adjusted Continue this process until you have the alert adjusted properly.properly.

When finished hold for 2 seconds to go back to the When finished hold for 2 seconds to go back to the Standby screenStandby screen

TLATLA

Display OptionsDisplay Options

Setting Display OptionsSetting Display Options




Pager Display OptionsPager Display Options

The Font Size Option is flashing at The Font Size Option is flashing at this time. this time.

Use or to change Font Size.Use or to change Font Size. Once the Correct Font Size is Once the Correct Font Size is

selected press to move on to selected press to move on to the next option.the next option.

ABC

Pager Display OptionsPager Display Options

The Contrast Option is flashing at this time. The Contrast Option is flashing at this time. Use or to adjust the level of Use or to adjust the level of

contrast on the pager. contrast on the pager. When your satisfied with you selection When your satisfied with you selection

press to move on to the next option, or press to move on to the next option, or hold it down for 2 seconds to go back to the hold it down for 2 seconds to go back to the main screenmain screen

ABC

TLATLA

Receiving Messages and Receiving Messages and Reviewing Stored MessagesReviewing Stored Messages

Receiving MessagesReceiving Messages

When receiving a message you pager will When receiving a message you pager will alert you as you selected. (See Alert alert you as you selected. (See Alert Settings)Settings)

The Alert will sound for 8 seconds or until The Alert will sound for 8 seconds or until you acknowledge the page.you acknowledge the page.

You can acknowledge the page by You can acknowledge the page by pressing any of the buttons on the pager pressing any of the buttons on the pager during the 8 second alertduring the 8 second alert

Your message will automatically display at Your message will automatically display at this time.this time.

Receiving MessagesReceiving Messages If you are away from your pager and do not If you are away from your pager and do not

acknowledge the page during the 8 second alert acknowledge the page during the 8 second alert a symbol will appear on your standby screen a symbol will appear on your standby screen indicating you have a message waiting for you.indicating you have a message waiting for you.

A reminder alert will sound every 5 min until you A reminder alert will sound every 5 min until you read the message.read the message.

To display and scroll through your read or unread To display and scroll through your read or unread messages press or . messages press or .

If the message length exceeds one screen press If the message length exceeds one screen press button again to scroll through the message. button again to scroll through the message.

A symbol will appear at the end of the A symbol will appear at the end of the message.message.

Stored MessagesStored Messages

Your pager will also store up to 32 Your pager will also store up to 32 messages. messages.

Once you get to 32 messages a symbol Once you get to 32 messages a symbol will display indicating that your pager’s will display indicating that your pager’s memory is full.memory is full.

If you receive a new message after this then If you receive a new message after this then your oldest read message will be deleted.your oldest read message will be deleted.

If you have more than 32 unread messages If you have more than 32 unread messages then the pager will delete your oldest then the pager will delete your oldest unread message. unread message.

Stored MessagesStored Messages

To scroll through your read and To scroll through your read and unread stored messages press unread stored messages press or . or .

TLATLA

Message OptionsMessage Options

Message OptionsMessage Options

Once you have a message displayed Once you have a message displayed you can press to bring up the you can press to bring up the message options.message options.

The first symbol that shows is The first symbol that shows is this is the “Read Message” Symbol this is the “Read Message” Symbol and if you want to go back to reading and if you want to go back to reading the message, simply press the the message, simply press the button.button.

Delete Message OptionDelete Message Option

To scroll through the other 2 options press To scroll through the other 2 options press either or .either or .

The symbol is to delete the message. The symbol is to delete the message. Simply press the button on the Simply press the button on the symbol to delete your current message. symbol to delete your current message. A ? will appear asking for confirmation to A ? will appear asking for confirmation to delete the message. delete the message.

To confirm and delete the message simply To confirm and delete the message simply press the button twice.press the button twice.

To cancel the deletion press the or To cancel the deletion press the or button to return to the previous screen.button to return to the previous screen.

Archive Message OptionArchive Message Option Press either or to get to the symbol.Press either or to get to the symbol. The symbol is to archive the message, and The symbol is to archive the message, and

prevent it from being deleted.prevent it from being deleted. Your pager can store up to 32 messages.Your pager can store up to 32 messages. If you archive 30 messages then your pager will only If you archive 30 messages then your pager will only

be able to receive 2 messages. (See Receiving be able to receive 2 messages. (See Receiving Messages Section)Messages Section)

Press on the Symbol to archive the message.Press on the Symbol to archive the message. A ? will appear asking for confirmation for this A ? will appear asking for confirmation for this

function.function. To cancel the archive option press the or To cancel the archive option press the or

button to return to the previous screen.button to return to the previous screen. To confirm the archive option press the button To confirm the archive option press the button

twice.twice.

TLATLA

End Of PresentationEnd Of Presentation

Documents

TLA. Replacing The Battery On the Back of the pager press in this button while moving the door away from the pager, then lift up. On the Back of the pager