8/10/2019 Tle Carpentry 2nd Quarter Exam
1/2
SAN VICENTE INTEGRATED SCHOOL
HIGH SCHOOL DEPARTMENT
SECOND QUARTERLY EXAM
TLE III CARPENTRY
Name:________________________ Date:_____________
Section & Grade:_________________ Score:________I. Encircle
the letter of the correct answer1. Is a common and simple joint but
not as strong and good looking as other joints.
a)Dovetail joint b)Butt joint c)Lap joint d)Rabbet joint
2.This is one of the strongest kinds of joint because of it
design, even without the use of glue.
a)Butt joint b)Dovetail joint c)Rabbet joint d) Lap joint
3.Known as the strongest of all joints because it is more gluing
surface
a)Lap joint b)Rabbet joint c)Dovetail joint d)Butt joint
4.This is a commonly used joint where the appearance of the wood
products need to considered,
as in picture frames a) Mortise and tenon joint b)Rabbet joint
c)Dado joint d)Miter joint
5.This si a strong and best looking joint usually used in
tables, chairs, windows
a)Mortise and Tenon joint b)Miter joint c)Rabbet joint d)Tongue
and grove joint
6.This is similar to Dado joint and used in making drawers,
windows and frames
a)Rabbet joint b)Miter joint c)Dado joint d)Tongue and Groove
joint
7.This joint is a mchine-made and used in lumber for
flooring
a)Tongue and Groove joint b)Miter jont c)Butt joint d)Rabbet
joint
8.This joint is used to support shelves, bookcases and
cabinets
a)Miter joint b)Rabbet joint c)Dado joint d)Butt joint
9.Conducting hazard assessment to a work place should be
done_________.
a)During working hours b)after working hours
c)before working hours d)all of the above
10.Observing good housekeeping ________________
a)prevents fire b )makes for easy location of tool and materials
needed
c)both a and b d)none of the above
11.In dealing with accidents, the first thing to do is
___________
a)stay calm b)apply first aid
c)call the attention of your teacher d)all of the above
12.Accidents can be prevented _______________
a)thru proper cares and maintenance of tools b)right attitudes
towards works
c)If you have enough knowledge about safety practices d)all the
above
13When an injury occurs, how soon should it be treated?
a)after class hours b)immediately c)both a and b d)later14.Which
primary uses least resources in the work place?
a)Occupational Health and Safety b)Risk Management
c)Work Procedure d)Work Simplication
15.What Government agency is responsible primarily for setting
and enforcing mandatory
occupational health and safety standards through appropriate
orders?
a)DPWH b)CSC c)DOLE d)DBM
16.Which is NOT a PPE? a)helments b)goggles c)gloves
d)shorts
17.Which is a common hazard? a)obstructions b)damaged saw blades
c)hazardous dust
d)all the above
18.Which is a risk? a)Out-of-Control cutting machine
b)Vibrationc)power cords d)beard, loose hair, loose clothing
19.Which is a step on risk management? a)Identification of
safety Procedures
b)Hazard Identification c)Training the workers d) all of the
above
20.Which is a control measure on accident prevention?
a)Work place communication and consultation b)Safety and health
committee meetings
c)Regular equipment and work safety checks d)all of the
above
II. Enumeration21-23. Give at least 3 kinds of hazards /
risk
24-26. Give at least 3 contingency measures
27-30. Give at least 4 different kinds of PPE
