t e c h n o l o g y f o r t h e p o w e r f u l

TECHNOLOGY PRODUCTS The Total Package

technology products114, udyog vihar, phase iv, p.o. maruti, gurgaon – 122015, haryana, indiatel. : +91-124-2340963 / 2340601 / 4014527fax : +91-124-2340963 / 4014527e-mail : raghbindra@yahoo.com, info@tp-india.com website : www.tp-india.com

Electrical TestingElectrical MeasuringElectrical Safety

SC DS

An insight into the past...A zoom into the future

te

ch

no

lo

gy

pr

od

uc

ts

I

N

D

E

X

Range of Products / Total Package Technology Products was incorporated in 1988 for design, manufacture and commissioning of

Electrical Testing, Measuring and Electrical Safety Equipment up to 800KV. Primarily aimed as import substitution

unit, Technology Products has developed a number of testing equipment for the first time in the country. Our

products are highly reliable and are being used for testing, commissioning and maintenance of vital equipment at

projects of National importance.

With the rapid industrialization and electrification, the demand of electrical testing, commissioning

and safety equipment has increased manifolds. Today all successful industries depend on reliable power supply. If

the commissioning in the beginning and testing and maintenance later on is carried out in a systematic way, most

of the problems are sorted out and breakdowns can be avoided

Technical Capability

Technology Products' team of highly experienced engineers and technicians can design, manufacture

and commission highly sophisticated Electrical Testing and Electrical Safety Equipment up to 800KV. Constant

support is available from our Principals who are leaders in their own fields. In past our engineers have designed

and manufactured testing equipment up to 800KV and highly specialized systems such as Cable Termination

Systems (Water Terminations) up to 300KV for Partial

Discharge measurement in XLPE Cables. Some of these

engineers had served in leading organizations of the world

and have been trained abroad in specialized field. Special

attention is paid on training of engineers and

documentation, which has in turn paid us rich dividends. Our engineers have undergone extensive training in the

following fields –

A constant feedback is taken from our clients regarding the performance of our equipment & in case

further improvement or modification in our designs is required, it is incorporated. A number of reputed

consultants recommend our equipment and also regularly consult us for the latest developments and techniques

in the field of Electrical Testing & Maintenance.

Our Senior Engineers and Executives are also visiting faculties to a number of Institutions like National

Power Training Institute, BHEL and many more.

In House Laboratory for Development, Testing and Quality Control

To produce high quality products and to develop latest equipment, we have established an In-House

Laboratory with state of art facilities. The Laboratory also serves for routine testing of our products and raw

materials. Facilities include High Voltage AC/DC Testing sets, High Voltage Precision AC Voltage Dividers of Class

0.5, 100KV AC & High Voltage Precision Voltage Dividers Class 0.1, 150KV DC, Automated Sphere Gaps, Insulation

Break Down Testers, Current Injection Equipment, High Voltage Insulation Testers, Precision Instruments, Corona

Free HV Test Set-ups, Thermal Imagers for Hot Spot Detection, Heat Run Tests and other Test and Calibration

Instruments. The accuracies of our instruments are traceable to National and International Labs such as Central

Power Research Institute (CPRI), Regional Test Laboratory (RTL), Electrical Research and Development

Association (ERDA). Periodic verification and calibration of all our Laboratory Instruments/Equipment is

conducted at Govt./Govt. Recognized Laboratories. We utilize services of National Laboratories, Test Houses,

Research & Development Centers whenever required for our R&D activities also.

Electrical Laboratories on turn key basis

Technology Products has established itself as a leading organisation for setting up of Electrical

Laboratories on Turn Key Basis i.e. from concept to commissioning. A number of laboratories at various projects of

National Importance have been set up by us. These laboratories have the latest equipment in the field of Electrical

Testing, Predictive Maintenance & Electrical Safety. We also impart training to engineers/users at site. As on date

Technology Products has set up maximum number of Electrical Laboratories at power projects in India as well as

abroad.

Electrical Testing & Measuring

Electrical Safety Equipment & Safety Practices including some of the highly specialized jobs like

Bare Hand Techniques of 400KV System'

Manufacturing, Servicing and Operation of Infrared Thermal Imaging Cameras with specific

applications on predictive maintenance on Power System Equipment

Planning and Setting up Electrical Laboratories on Turn Key Basis i.e. from concept to

commissioning.

t e c h n o l o g y f o r t h e p o w e r f u l

Electrical Testing, and Electrical Safety Equipment

Infrared Thermal Imaging Cameras 13

Partial Discharge, Corona Detection Equipment, Sensors & other equipment 19

Circuit Breaker Analysis & Testing Equipment 24

Other Specialized Equipment 28

List of clients 31

1. High Voltage AC & DC Testing Kits 1

2. High Voltage Dividers & Sphere Gaps 2

3. Primary Current Injection Test Sets 3

4. Secondary Current Injection Test Sets & Compact Relay Test Kit RT-100 4

5. Vacuum Circuit Breaker Bottle Test Sets 5

6. Ultra Light 60KV High Voltage DC Test Kit 6

7. Electrical Safety Equipment & Hot Line Working Equipment 7

a. Insulated Operating Sticks 7

b. High Voltage Detectors (Live Line Indicators Model TP-HT, S9 Detector & Spout Tester) 8

c. Discharge Rod with Non Linear Carbon Discharge Rods 9

d. Drop Out Fuse Operating System 9

e. 10

f. 11

8. Cable Fault Locating Equipment 12

. Hot Find (S-80) 14

10. S-160 15

11. S-180 16

12. S-280 17

13. G-90 18

14. Arrester Default Detector ADD 19

15. Partial Discharge Scanner - PDS 19

16. Portable Partial Discharge Test Systems XDP / XDP-II & Sensors 20

17. Ultrasonic Corona / Arcing Detector ULD-40 21

18. Portable Partial Discharge & Localisation System for Power Transformer AE-150 22

19. Micro Ohm Meter DRM-10 23

20. Medium Voltage Live Cable Identification System LCI 23

21. Circuit Breaker Analyser SA 100 24-25

22. Circuit Breaker Analyser SA 100R 26

23. Circuit Breaker Tester SA 100S 27

24. High Current Micro Ohm Meter MM100 27

25. PPM Meter (Karl Fischer Titrator) for Moisture Measurement in Transformer Oil 28

26. Interfacial Tension Meter for Transformer oil 28

27. Hydrogen Gas Leak Detector 29

28. SF6 Gas Leak Detector 29

29. Relay Repair Tool Kits 30

30. Digital Time Interval Meters 30

31. Other Miscellaneous Products 30

Portable Earthing Equipment for High Fault Levels

Phasing Out Sticks

9

For Detailed Equipment Specifications please contact us.

1 2

1. 2.

tel: fax: e-mail: website: +91-124-2340963 / 2340601 / 4014527. +91-124-2340963 / 4014527 raghbindra@yahoo.com, info@tp-india.com www.tp-india.com . .

35KV AC/ 90KV DC HV UNIT

AUTOMATED CONTROL PANEL WITH LCD DISPLAY AND

USER INTERFACE FOR 150KV TEST TRANSFORMER

150KV AC PD FREE TEST

TRANSFORMER

High Voltage AC/DC Dividers & Sphere GapsSphere Gaps are absolute standards for measurement & calibration purposes of high voltage equipmentSphere Gaps from 20mm to 1500 mm are available. The Sphere Gaps are provided with automated controlswith digital display.

Voltage Dividers with digital KV meters are manufactured in the following ratings

AC/DC VOLTAGE RANGES : 10KV, 25KV, 50KV, 100KV, 150KV & 300KV

ACCURACY CLASS : Available in Accuracy Class 0.5 & 1.0

R-C Divider

High Voltage AC/DC Testing KitsHV Testing Kits are used for testing of Motors, Generators, Switchgears, Cables, Transformers and other electrical equipment. These are used for testing & commissioning of HV electrical equipment.

The High Voltage AC/DC Test Sets are available in customized ratings also..

The Controls are automated microprocessor based which controls the operation of the equipment. Front Backlit LCD Display integrates all the meters and also displays the status of tests. The test programming is done via menu driven user interface.

Special HV, Low Capacitance flexible cables rated for 75KV, 100KV, 120KV & 300KV are available. These cables are highly flexible screened type which ensures highly safe testing environment. The screen of these cables are at earth potential Special connectors are also available along with the cables to suit a wide variety of test requirements.

INPUT : 240V, 50Hz, 1 Phase AC

OUTPUT : 0-300KV AC (in various ratings – 25KV, 50KV, 75KV, 100KV,150KV, 200KV & 300KV AC)

0-700KV DC (in various ratings – 25KV, 50KV, 60KV, 90KV,100KV, 150KV, 300KV, 400KV, 500KV, 700KV DC)

KVA/CURRENT RATINGS : Available in various ratings

PROTECTIONS : 6 types of inbuilt protections are provided for the safety ofoperator and equipment under test

Other Options available in our High Voltage testing Kits

Automated Controls

High Voltage Testing Cables & Connectors

te

ch

no

lo

gy

pr

od

uc

ts

The Dividers are available in Resistive,Capacitive and R-C Network designs-

Capacitive Divider

3.Primary Current Injection Testing Kits

RATINGS : 500, 1000,1500, 2000, 3000, 4000, 5000 & 10000 A

CONNECTIONS : Series-Parallel to select various current ranges.

KVA RATINGS : 5KVA to 100KVA (Combination of various Currents & KVARatings available in continuous & intermittent Duty Cycles)

CONSTRUCTION : In single/two units i.e. control cum protection unit &loadingunit, stationary & mobile trolley mounted models available

PROTECTIONS : 6 types of inbuilt protections are provided for the safetyof operator and equipment under test.

Primary Current Injection Kits are used to test and commission Circuit Breakers, Bus Bars, CTs, Relays,MCCs, PCCs etc. These are also used for high current injection and simultaneously measuring voltage dropsand hot spots in bus-bar joints, circuit Breaker Contacts etc.

The High Current Loading Units are also available with series parallel links arrangement to configure thecoils in series– parallel configurations to meet the field test requirement.

The Controls are automated microprocessor controls the operation of the equipment front Back lit LCDDisplay integrates all the meters and also displays the status of tests. The test programming is done viamenu driven user interface

Special flexible high current low resistance cables from 25mmsq to 600mmsq are available for primaryinjection testing.

Other Options available in our Primary Injection Testing Kits

Automated Controls

. High Current Cables

te

ch

no

lo

gy

pr

od

uc

ts

4.Secondary Current Injection Test Sets

INPUT : 240V, 50Hz, 1 Phase ACCURRENT RATINGS : 0-5, 10 & 100A Continuously Variable (Continuous Duty) @

500VA on all ranges AC VOLTAGE OUTPUT : 0-240VAC @ 180VADC VOLTAGE OUTPUT : 0-220VDC (optional) @ 180VA

METERING : Analogue Ammeter and Voltmeter TIME INTERVAL METER : Digital LED Display Time Interval Meter is integrated

in the set. The time interval meter is autoranging type with Least Count of 0.1 milli second in lowest rangeThe Timer is fully programmable type and can be programmedfor Range/Resolution, Auto Reset etc.

External Relay Trip Contacts : 1 NO + 1 NC Contacts PROTECTIONS : 6 types of inbuilt protections are provided for the safety of

operator and equipment under test.

: SAME AS ABOVE BUT WITH CURRENT RATINGS OF 5 &30A @180VAOther Ratings up to 200A also available as customized rating. Highly Compact Relay Test Set RT-100

INPUT : 230V, 50Hz, 1 Phase ACCURRENT RATINGS : 10A for 2 hours, 25A for 1 Hour, 50A for 1.5Minutes,

200A short time AC VOLTAGE OUTPUT : 0-240VAC @ 2A for 1 Hour DC VOLTAGE OUTPUT : 0-300VDC @ 2A for 1 Hour METERING : Digital Metering Class 0.5TIME INTERVAL METER : 0.000 to 999.999 Sec auto ranging with 1mS resolutionREADOUT : Output parameters are displayed on a large LCD DisplaySET OF RESISTANCES : 0.5W to 500W in various ratings inbuiltExternal Relay Trip Contacts : NO / NC Contacts available for relay testing

All types of static, attracted armature, induction type, thermal & directional relays & CTs can be tested usingour Secondary Injection Kits.

A compact secondary injection test set weighing just 10KGsdesigned for testing of protective relay equipment. This highly compact instrument is designed for use inHigh Voltage Sub Stations and Industrial Environments

MODEL TP-100A

MODEL TP-30A

RELAY TESTER (RT-100)

800A SHORT TIME RATED PORTABLE

PRIMARY INJECTION KIT IN SINGLE UNIT

AUTOMATED CONTROLS WITH

USER INTERFACE AND LCD DISPLAY

FOR PRIMARY INJECTION KIT

3000A CONTINUOUS RATED HIGH CURRENT

UNIT OF PRIMARY INJECTION KIT

MODEL TP-100A

MODEL RT-100

3 4For Detailed Equipment Specifications please contact us. tel: fax: e-mail: website: +91-124-2340963 / 2340601 / 4014527. +91-124-2340963 / 4014527 raghbindra@yahoo.com, info@tp-india.com www.tp-india.com . .

5 6

te

ch

no

lo

gy

pr

od

uc

ts

Vacuum Circuit Breaker Bottle Test Sets

INPUT : 240V, 50Hz, 1 Phase AC

OUTPUT : 0-60KV DC @ 2.5mA

METERING : Digital KV & mA Meters Class 1.5

OUTPUT : The output is available through a highly flexible HV Cable which can be directly connected to the vacuum bottle under test.

.

The specifications of this set are same as that of Model VT-60 above except for voltage rating

OUTPUT : 0-35KV DC @ 2.0mA

To test VCB Bottles we have developed a specialized Vacuum Bottle test Set. This is a portablemicroprocessor based equipment with in built 60KVDC source and controllers to test bottles at highvoltage. The vacuum bottles can be tested just by drawing out the breakers (without even removing thebottle) in less than 5 minutes time.

The leakage current passing through the vacuum bottle is monitored by a microprocessor which in turn indicates thecondition of vacuum bottles. The threshold settings can be programmed (in the internal microprocessor) to suit differentbreaker types also.

Leakage current monitor & controllers are provided to test the health of bottles. The values of output voltage and leakagecurrents are displayed on Digital LED meters

Available in extra compact design weighing <15Kgs approx.

Model VT-60 - For Testing Vacuum Bottles up to 33KV

Model VT-35 - For testing vacuum bottles up to 11KV.

Ultra Light High Voltage DC Test Set

INPUT : 240v±10% 1 phase ac 50Hz

OUTPUT : VOLTAGE OUTPUT : 0-60KV DCCURRENT OUTPUT : 2.5mARIPPLE : <0.1%P-P

VOLTAGE REGULATION : Better than 0.05%

DESIGN : Transformer-less Transistorised Design

CONTROLS : Local control with potentio-meters as wellthe unit can be configured for remote operation also

LOCAL CONTROL : Output voltage, Over voltage settingOutput current trip, Max Current setting

REMOTE CONTROL : AvailableTX-1 connector to be configured as perInstruction manual to achieve remote control

TEST AREA INTERLOCK : Provided

OUTPUT CABLE : The set is provided with extremely flexible high voltage cablewhich has a Copper mesh screen for safety considerations

DISPLAY PARAMETERS : 3½ Digits voltage & current meters 1.0% accuracy othermessage indicationsOT– Over temperatureID – InterlockEXT – REMOTE CONTROL

PROTECTIONS : Over voltage protectionOver current protection Protection against output short-circuit and arc dischargeOver temperature protection

MODEL TP-60-2.5D - Transformer less design – Weighs approx. 10Kgs

This Compact power supply/test set can perform all laboratory and field tests of DC Hipot.A flexible High Voltage Cable is provided at the back for connecting to the test specimen.Available in Rack Mount as well as portable design.

MODEL VT-60

TP-60-2.5D

65.

For Detailed Equipment Specifications please contact us. tel: fax: e-mail: website: +91-124-2340963 / 2340601 / 4014527. +91-124-2340963 / 4014527 raghbindra@yahoo.com, info@tp-india.com www.tp-india.com . .

7 8

7b.

te

ch

no

lo

gy

pr

od

uc

ts

Electrical Safety Equipment

MAIN INSULATION : 'F' Class to IS, BS & IEC Specifications

DIMENSIONS OF MAIN POLE : 25 ID, 31 OD& EXTENSION HANDLES 1250mm(main pole), 1450mm(extension handle).

MAIN POLE ONLY : 1.25m MAIN POLE + 1 EXTN. HANDLE : 2.5mMAIN POLE + 2 EXTN. HANDLE : 3.75mMAIN POLE + 3 EXTN. HANDLE : 5.0mMAIN POLE + 4 EXTN. HANDLE : 6.25m

To ensure operator & plant safety, it is mandatory to use electrical safety equipment in all MV, HV & EHV installations. Particularly during shut-downs, the safety of the personnel and equipment is ensured by using proper electrical safety equipment such H.T.Power Tester (Live Line Detector or Hot Sticks), Discharge Rods (Non Liner Carbon Type), Portable Earthing Equipment, Operating Rods etc.

Technology Products is India’s only manufacturer using “F' Class insulation as per IS, BS & IEC standards for all high voltage safety equipment and was the first to manufacture such equipment up to 510KV Class for the first time in the country.

The Insulated Tubes for Electrical Safety Equipment are available in 2 types

Hollow Tubes

Foam Filled Rods (as per IEC 855)

The Insulated operating sticks are manufactured in our plant using extrusion process. The extrusion is carried out under high pressure which ensures excellent mechanical properties and smooth surface finish. The sticks are coated with double (or more) coatings of Anti – Tracking Compounds which provide excellent surface finish and anti tracking properties.

For Foam Filled Rods special machine is used to fill foam with controlled density. The foam has a 'Closed Cell Structure’ which prevents ingress of dust & moisture inside the rod and maintains excellent electrical properties throughout its life.

The above Range Extension can be used to extend the System Voltage rating or to Extend the length of the system so as to reach more heights. Basic System is suitable for 33KV, Extension Handles are added to Extend the voltage ranges up to 66KV, 132KV, 220K, 420KV & 510KV. The system is extremely light in weight and is designed to be operated by a s i n g l e person.

INSULATED OPERATING STICKS - Insulated Tubes (Extension Handles, Universal Sunshine Connectors & associated tools)

INSULATED STICKS FOR LIVE LINE DETECTORS / DISCHARGE RODS AND PORTABLE EARTHING EQUIPMENT

LENGTHS OF INSULATED STICKS

7., 7a.LIVE LINE DETECTOR (HT. Power Tester)

LIVE LINE DETECTOR MODEL TP-HT

MODES OF OPERATION

LIVE LINE DETECTOR MODEL TP-S9

MODES OF OPERATION

LIVE LINE DETECTOR – SPOUT TESTER MODEL TP-SPOUT

OPERATING VOLTAGE RANGE : 80Volts to 420KV (Adequate no. of insulated sticks to be connected to match the rated voltage)

INDICATION : Visual LED & Audible Buzzer Indication to show thepresence of voltage

TYPE : Contact as well as Field Proximity Type

: Test, Low & High

SELF TEST FACILITY : Inbuilt facility to check the health of the Detector

POWER SUPPLY : 9V Battery

ACCESSORIES : Special Waterproof carrying cases

OPERATING VOLTAGE RANGE : 230Volts to 750KV (Adequate no. of insulated sticks to beconnected to match the rated voltage)

INDICATION : Visual LED & Audible Buzzer Indication to show the presenceof voltage

TYPE : Contact as well as Field Proximity Type

SELF TEST FACILITY : Continuous and Automatic Self Testing

POWER SUPPLY : 3x Size C battery (easily available and long lasting) (The detector continuously diagnoses its health duringoperation)

ACCESSORIES : Special Waterproof carrying cases External Detector Proving unit

Also known as Live Line Detector, indicates presence of high voltage when the tester is brought near live circuits. It is a must for Electrical Engineers & Technicians working in Switch-yards, Circuit Breakers and high voltage equipment. The Live line detectors are available in voltage ratings of 11/33, 66, 132, 220, 420 & 510KV Ratings. Brief specifications of our system are as follows –

The Spout Tester is similar to TP-S9 Model except that it has a detachable probe. When the detachable probe is removed from the tester, it will not operate for safety precautions. The Spout Tester is suitable for both indoor as well as out door applications. The Detector can operate in both contact as well as field proximity modes.

‘5’ sec.

ON/OFF &Sensitivity Adjustment Switch

OFFT - TestL - Field Proximity ModeH - Contact Mode

TP-HT

TP-S9

For Detailed Equipment Specifications please contact us. tel: fax: e-mail: website: +91-124-2340963 / 2340601 / 4014527. +91-124-2340963 / 4014527 raghbindra@yahoo.com, info@tp-india.com www.tp-india.com . .

9 10

te

ch

no

lo

gy

pr

od

uc

ts

Portable Earthing Equipment Portable Earthing Equipment are safety equipment designed for discharging & grounding of dead equipment. The system is designed for high fault levels so that even if during shut downs, when technicians are on the job, by mistake if the supply is switched ON, the Portable Earthing Equipment saves human life as well as equipment under maintenance. Special Line End & Earth End Clamps along with operating socket and earthing lead are used. The Line End Clamps, Earth End Clamps & operating sockets are made of very special aluminum alloys which can withstand high short circuit currents.

Using Portable Earthing Equipment, clamps are applied from remote just by turning the insulated operating pole and the operator never comes in contact with any conductor, so it is highly safe system. Using the common operating pole clamps are applied on each phase one by one.

For Dimensions of Insulated Rods please refer Specifications of Insulated Sticks at the beginning of Electrical Safety Equipment Section.

Line End Clamps Operating Sockets for Fixing & Removing Line End Clamps Earth End Clamps Extension handles to extend the lengthSpecial Waterproof carrying cases

Flexible Copper in Transparent and Bright Orange SheathFlexible Aluminum in Transparent and Bright Orange Sheath(The grounding cables are Pressure lugged at either ends)

MAIN INSULATION : ‘F' Class to IS, BS & IEC

FAULT LEVEL RATINGS : 7.5KA, 10.2KA, 21KA, 35KA & 40KA for short duration.

Special Grounding Cables Available in following types

Line End Clamps for wide sizes of Conductors and Bus Bars

ACCESSORIES

7c., 7d 7eDischarge Rods(Non Linear Carbon Resistor Type)

Drop Out (DO) Fuse Operating Rods

Non Linear Carbon Discharge Resistor Type Discharge Rods are used to discharge dead system having limited fault levels and also to discharge the static & induced charges in the dead system or equipment, particularly in transmission lines, cables, transformers, reactors, large bus bar systems, switch-gears etc. The earthing lead is made up of special highly flexible braided copper cable with transparent sheath. Copper Hook of 4” dia of ½” thick copper rod & Earth End Clamp of special alloy are provided.

For Dimensions of Insulated Rods please refer Specifications of Insulated Sticks in the beginning of Electrical Safety Equipment Section.

Discharge Head fitted in the Discharge RodExtension handles to extend the length 4” Dia Copper Hook for Bus Bars Special Waterproof carrying cases

When discharging inductive apparatus (transformers, reactors etc.) controlled discharging must be used. We provide non linear carbon discharge resistor for this purpose which prevents the lightning impulses appearing across the equipment being discharged. While discharging inductive loads the emf induced across the object is directly proportional to rate of change of flux i.e.

Since L (inductance) is usually large and the discharging takes place in microseconds, a huge impulse voltage resembling a 1.2/50µsecpulse appears across the object (a typical waveform is shown in Fig), thus subjecting the equipment under discharging to a lightningimpulse voltage.

To overcome this non linear carbon discharge resistor is employed. The reverse temperature coefficient of carbon facilitatescontrolled discharging. As the current flows through the carbon resistance, this increases the temperature and by virtue ofreverse temperature coefficient, the resistance falls. Therefore as the current is flowing, voltage is reducing and sinceresistance is also reducing a controlled discharging takes place

The DO Fuse operating rods has and innovative design for fitting, removing & changing Drop Out Fuses. The DO Fuse Operating Rods has a spring loaded Fuse Jaw which accepts the DO fuses easily and ensures that it does not fall while fitting or removing. The entire operation is carried out from ground level comfortably.

This method saves considerable amount of time and effort for fuse replacement and provides extremely safe procedure as compared to the conventional procedures.

MAIN INSULATION : ‘F' Class to IS, BS & IEC Specifications

E.m.f. Induced } L dv/dt

ACCESSORIES

Theory for Controlled Discharging

Vol

tage

Indu

ced

Time in Micro Seconds

VOLTAGE PEAK APPEARING ACROSSTEST OBJECT. THE VOLTAGE INDUCEDMAY BE UP TO 1.5 TIMES THERATED VOLTAGE OF THE SYSTEM

DO FUSE OPERATING ROD

DISCHARGE ROD WITH ACCESORIES

LINE END- 4.5” BUS BAR

LINE END- 6 to 19mm

LINE END- 8 to 28mm

EARTH END

- 15mm max.EARTH END

SWIVEL

- 15mm max.

CLA

MP

S

OPERATING POLE

WITH SOCKET

GR

OU

ND

ING

CA

BLE

S

WITH LINE END CLAMP-19 to 65mm HEAVY DUTY

For Detailed Equipment Specifications please contact us. tel: fax: e-mail: website: +91-124-2340963 / 2340601 / 4014527. +91-124-2340963 / 4014527 raghbindra@yahoo.com, info@tp-india.com www.tp-india.com . .

11 12

te

ch

no

lo

gy

pr

od

uc

ts

Phasing Out SticksPhasing Out Sticks are used to phase out two sources of supply directly at high tension level without the use of Pts.

TYPE : Bipole Type Hand Held with KV Meter

RANGE : 15KV AC & 36KV AC Models (Covering 0 to 15/36KV)

NO. OF POLES : 2 (Two)

INDICATION : Direct Voltage read out on the KV meter. (When two sourcesare in Phase, potential difference is minimum & when twovoltages are out of phase, potential difference is maximum)

PROTECTION : Inbuilt HV Protective Resistors against shorts and grounds

CARRYING CASE : Padded Nylon or Hard carrying case for storage and transportation.

Cable Fault Locating Equipment Technology Products offers a complete range of Cable Fault Locating Equipment for LV & HV Cables in Power Plants, Heavy Industry & Distribution Systems . Occurrence of cable fault can not be avoided due to many factors. Long outage of a cable from service results in heavy loss of revenue to the power distribution company, production loss to industries as well as unpleasant condition to general public. This requires an efficient instrument capable of locating the fault in minimum possible time and restoring the supply.

Low cost - Increase productivity by equipping more technicians with their own TDRs.Ergonomic design - Designed to be held comfortably in one handLarge, easy to use well-spaced buttonsSmall size - Easy to carryCompact styling makes it convenient to use in tight spacesModular test lead design Adaptable to a variety of industries and applications.Modules are available for twisted pair, coaxial cable, and power cable useDurable, weather-resistant housing - Suited to indoor and outdoor usage. Rugged plasticcase stands up to everyday use

Technology Products manufactures complete range of Cable Fault Burning Unit. When High resistance faults are encountered during Cable Fault Location, before it can be identified and pin pointed the fault must be burned in order to convert the fault into low resistance fault.

Cable Fault Burning units are available in 15KV, 20KV & 30KV DC Ratings. The units are provided with a flexible High Voltage Cable for ease of connection at site.

Surge Wave Generators 16KV & 32KV Surge Wave receiver or Pin Pointing sets with sensors, headphones and amplification unitCable Route Tracers (for unknown cable route detection and depth measurement)Cable Identification EquipmentAccessories such as Meggers, Discharge Rods, Hipot Sets

Time Domain Reflectometer Model 1550 - A basic TDR for Power Cables having a range of up to 3000 meters .

Cable Fault Burning Units

Following Equipment are also available for Cable Fault Localization, Pin Pointing and Route Tracing

FEATURES/KEY BENEFITS

7f. 8.

BURNING UNIT- 30 KV DC

TIME DOMAIN REFLECTOMETER

For Detailed Equipment Specifications please contact us. tel: fax: e-mail: website: +91-124-2340963 / 2340601 / 4014527. +91-124-2340963 / 4014527 raghbindra@yahoo.com, info@tp-india.com www.tp-india.com . .

Most electrical problems within industrial facilities are manifested or

are accompanied by temperature changes as an effect prior to

failure. For this reason IR thermography has become an

integral part of most predictive/preventative maintenance programs. Infrared cameras can pick up small

changes in temperature not visible to the human eye. It is a non contact, non destructive, and fairly simple method of detecting impending electrical problems.

It is widely known that as temperature in a conductor rises, so does it's resistance. Similarly, as resistance increases (in most conductors) temperature rises.

A loosely tightened connector effectively reduces the surface area in which current can flow and consequently result in an increase in the contact resistance. Oxidation build up at the connection point can also cause a rise in resistance. The origin of most conductor, insulation, and component problems can be traced to a poor connection using an infra-red camera.

Technology Products in association with their PrincipalsM/s Guangzhou Sat Infrared, offers a wide range of infrared cameras for all applications i.e. from entry level to the most sophisticated ones to meet a wide variety of applications from Predictive maintenancein Power system, Industries, R&D Applications etc. These infrared thermal

imaging cameras are available in temperature ranges from

-20°C to +250°C and extended ranges of -40°C

to +2000°C. Standard and Professional

Infrared Image Analyzing and report

generation software are available. Real time image transfer and infrared video recording

software along with camera control softwares are also available as options.

9.

te

ch

no

lo

gy

pr

od

uc

ts

oA low thermal sensitivity of 0.12 C allows you to detect the pinpoint fault. Full radiometric thermal images can beeasily analyzed in your PC or PDA.

o oDust and splash proof IP54 encapsulation. Operates from -20 C to +50 C ambient temperatures, shock 25G andvibration 2G, Hot Find is usable in all industrial conditions. Patented tilt 2.5'' LCD allows you to inspect withconvenience even in tough locations.

Due to a very small minimum focus distance of 10cm, the Hot Find thermal camera gives you more detail of 40 pixelsper mmsq. to your target.

1000 images recording capacity, 2.5 hours battery operation time and power save mode assures long time inspectionwithout interruption.

The accessories are optionally priced.

Model Hot Find (S-80) - A cost effective Entry Level Infrared camera based on 160x120 Pixel UFPA Detector.

Precision temperature measurement

Rugged and ergonomic design

Handling

Long period of continuous operation

Other Features Software

Accessories available

Detector : 160x120 Uncooled Focal Plane ArraySpectral range : 7.5 to 13 Microns Field of View/Min Focus Distance : 20° x 15° / 10mmImage Refresh Rate : 9 / 25 / 50HzTemperature range : -20°C to +250°CNETD : 0.12° @ 30°CDisplay : 2.5” High Resolution LCD TFT Display Power source : Rechargeable Li-Ion Battery

Operation time >2 hours continuousImage Storage : Internal Flash Memory

USB Port for image Transfer to PC

: Laser Pointer, : SAT Report software for Thermal Image Analysis,

report preparation and printing included

: Batteries & Battery ChargersPC Cables

Infrared ThermalImaging

S-80

infr

ared

ther

mal

imag

ing

- 45

- 40

- 35

- 30

- 25

- 20

- 15

- 10

- 5

O48.7 C

O4.3 C

Ir1

13 14For Detailed Equipment Specifications please contact us. tel: fax: e-mail: website: +91-124-2340963 / 2340601 / 4014527. +91-124-2340963 / 4014527 raghbindra@yahoo.com, info@tp-india.com www.tp-india.com . .